2018년 07월 24일 17:04에 Inki Dae 이(가) 쓴 글:

Hi,

2018년 06월 19일 17:19에 Maciej Purski 이(가) 쓴 글:

...

The current implementation assumes that the only possible peripheral device for DSIM is a panel. Using an output bridge child device should also be possible.

If an output bridge is available, don't create a new connector. Instead, call drm_bridge_attach() and set encoder's bridge to NULL in order to avoid an out bridge from being visible by the framework, as the DSI bus needs control on enabling its child output bridge.

Such sequence is required by Toshiba TC358764 bridge, which is a DSI peripheral bridge device.

Right, we should consider DSI to LVDS bridge.

In addition, could you update below binding document? Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

Thanks, Inki Dae

Thanks, Inki Dae

...

Signed-off-by: Maciej Purski m.purski@samsung.com

drivers/gpu/drm/exynos/exynos_drm_dsi.c | 38 ++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 9599e6b..c0408c0 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -255,6 +255,7 @@ struct exynos_dsi { struct mipi_dsi_host dsi_host; struct drm_connector connector; struct drm_panel *panel;

• struct drm_bridge *out_bridge; struct device *dev;

  void __iomem *reg_base;

@@ -1499,7 +1500,30 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, struct mipi_dsi_device *device) { struct exynos_dsi *dsi = host_to_dsi(host);

• struct drm_device *drm = dsi->connector.dev;

• struct drm_encoder *encoder = &dsi->encoder;

• struct drm_device *drm = encoder->dev;

• struct drm_bridge *out_bridge;

• out_bridge = of_drm_find_bridge(device->dev.of_node);

• if (out_bridge) {

• drm_bridge_attach(encoder, out_bridge, NULL);
  

• dsi->out_bridge = out_bridge;
  

• encoder->bridge = NULL;
  

• } else {

• int ret = exynos_dsi_create_connector(encoder);
  

• if (ret) {
  

• 	DRM_ERROR("failed to create connector ret = %d\n", ret);
  

• 	drm_encoder_cleanup(encoder);
  

• 	return ret;
  

• }
  

• dsi->panel = of_drm_find_panel(device->dev.of_node);
  

• if (dsi->panel) {
  

• 	drm_panel_attach(dsi->panel, &dsi->connector);
  

• 	dsi->connector.status = connector_status_connected;
  

• }
  

• }

  /*

  • This is a temporary solution and should be made by more generic way.

@@ -1518,11 +1542,6 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, dsi->lanes = device->lanes; dsi->format = device->format; dsi->mode_flags = device->mode_flags;

• dsi->panel = of_drm_find_panel(device->dev.of_node);
• if (dsi->panel) {

• drm_panel_attach(dsi->panel, &dsi->connector);
  

• dsi->connector.status = connector_status_connected;
  

• } exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode = !(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);

@@ -1654,13 +1673,6 @@ static int exynos_dsi_bind(struct device *dev, struct device *master, if (ret < 0) return ret;

• ret = exynos_dsi_create_connector(encoder);
• if (ret) {

• DRM_ERROR("failed to create connector ret = %d\n", ret);
  

• drm_encoder_cleanup(encoder);
  

• return ret;
  

• }
• if (dsi->mic_bridge_node) { mic_bridge = of_drm_find_bridge(dsi->mic_bridge_node); if (mic_bridge)