Hello, I'm testing 2.6.35-rc1 kernel on Asus P4P800-VM (i865G chipset). After loading i915 module, the screen goes blank and the kernel hangs completely (same with 2.6.35-rc1-git2). This does not happen with "i915.modeset=0" parameter.
This problem does not appear with 2.6.34. Is this a known regression?
On Fri, 4 Jun 2010 22:01:28 +0200, Ondrej Zary linux@rainbow-software.org wrote:
Hello, I'm testing 2.6.35-rc1 kernel on Asus P4P800-VM (i865G chipset). After loading i915 module, the screen goes blank and the kernel hangs completely (same with 2.6.35-rc1-git2). This does not happen with "i915.modeset=0" parameter.
This problem does not appear with 2.6.34. Is this a known regression?
Not known as far as I know -- we'd enjoy a bisect with a bug report on bugs.freedesktop.org.
On Saturday 05 June 2010 02:23:27 Eric Anholt wrote:
On Fri, 4 Jun 2010 22:01:28 +0200, Ondrej Zary linux@rainbow-software.org
wrote:
Hello, I'm testing 2.6.35-rc1 kernel on Asus P4P800-VM (i865G chipset). After loading i915 module, the screen goes blank and the kernel hangs completely (same with 2.6.35-rc1-git2). This does not happen with "i915.modeset=0" parameter.
This problem does not appear with 2.6.34. Is this a known regression?
Not known as far as I know -- we'd enjoy a bisect with a bug report on bugs.freedesktop.org.
I don't like that place - from 13 bugs I have reported there, 11 are still open :( I even provided a patch for one and nobody cares...
Bisect reveals two possible bad commits: 386516744ba45d50f42c6999151cc210cb4f96e4 drm/fb: fix fbdev object model + cleanup properly
or 8be48d924c307e72e3797ab5bde81b07a1ccc52d drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
It depends on the last step of bisection - that kernel hangs but in a different way - the monitor has no signal (in every other case, the monitor was just blank).
Reverting these commits is not possible.
On Saturday 05 June 2010 02:23:27 Eric Anholt wrote:
On Fri, 4 Jun 2010 22:01:28 +0200, Ondrej Zary linux@rainbow-software.org wrote:
Hello, I'm testing 2.6.35-rc1 kernel on Asus P4P800-VM (i865G chipset). After loading i915 module, the screen goes blank and the kernel hangs completely (same with 2.6.35-rc1-git2). This does not happen with "i915.modeset=0" parameter.
This problem does not appear with 2.6.34. Is this a known regression?
Not known as far as I know -- we'd enjoy a bisect with a bug report on bugs.freedesktop.org.
Serial console with some printk()s added: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.35-rc1-git2 (root@test) (gcc version 4.4.4 (Debian 4.4.4-1) ) #14 SMP Sat Jun 5 21:51:52 0 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f730000 (usable) [ 0.000000] BIOS-e820: 000000001f730000 - 000000001f740000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f740000 - 000000001f7f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f7f0000 - 000000001f800000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] last_pfn = 0x1f730 max_arch_pfn = 0x100000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-000000001f730000 [ 0.000000] ACPI: RSDP 000fad50 00021 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 1f730100 0003C (v01 A M I OEMXSDT 09000505 MSFT 00000097) [ 0.000000] ACPI: FACP 1f730290 000F4 (v03 A M I OEMFACP 09000505 MSFT 00000097) [ 0.000000] ACPI: DSDT 1f7303f0 036A7 (v01 PPVM1 PPVM1911 00000911 INTL 02002026) [ 0.000000] ACPI: FACS 1f740000 00040 [ 0.000000] ACPI: APIC 1f730390 0005C (v01 A M I OEMAPIC 09000505 MSFT 00000097) [ 0.000000] ACPI: OEMB 1f740040 0003F (v01 A M I OEMBIOS 09000505 MSFT 00000097) [ 0.000000] 503MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1f730000 [ 0.000000] low ram: 0 - 1f730000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001f730 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001f730 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 1f800000 (gap: 1f800000:e0380000) [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @c1800000 s28160 r0 d20992 u2097152 [ 0.000000] pcpu-alloc: s28160 r0 d20992 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127696 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc1-git2 root=/dev/sda1 ro console=ttyS0 console=tty0 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Subtract (41 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0001000000 - 00013cff2c] TEXT DATA BSS [ 0.000000] #3 [00013d0000 - 00013d62a8] BRK [ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved [ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf [ 0.000000] #6 [000009fc00 - 00000f12a0] BIOS reserved [ 0.000000] #7 [00000f13b8 - 00000ff780] BIOS reserved [ 0.000000] #8 [00000f12a0 - 00000f13b8] MP-table mpc [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE [ 0.000000] #12 [00013d62c0 - 00017c62c0] BOOTMEM [ 0.000000] #13 [00013cff40 - 00013cff44] BOOTMEM [ 0.000000] #14 [00017c62c0 - 00017c6380] BOOTMEM [ 0.000000] #15 [00013cff80 - 00013cffb0] BOOTMEM [ 0.000000] #16 [00017c6380 - 00017c7b80] BOOTMEM [ 0.000000] #17 [00013cffc0 - 00013cffe7] BOOTMEM [ 0.000000] #18 [00017c7b80 - 00017c7c7c] BOOTMEM [ 0.000000] #19 [00017c7c80 - 00017c7cc0] BOOTMEM [ 0.000000] #20 [00017c7cc0 - 00017c7d00] BOOTMEM [ 0.000000] #21 [00017c7d00 - 00017c7d40] BOOTMEM [ 0.000000] #22 [00017c7d40 - 00017c7d80] BOOTMEM [ 0.000000] #23 [00017c7d80 - 00017c7dc0] BOOTMEM [ 0.000000] #24 [00017c7dc0 - 00017c7e00] BOOTMEM [ 0.000000] #25 [00017c7e00 - 00017c7e40] BOOTMEM [ 0.000000] #26 [00017c7e40 - 00017c7e80] BOOTMEM [ 0.000000] #27 [00017c7e80 - 00017c7e90] BOOTMEM [ 0.000000] #28 [00017c7ec0 - 00017c7f16] BOOTMEM [ 0.000000] #29 [00017c7f40 - 00017c7f96] BOOTMEM [ 0.000000] #30 [0001800000 - 000180c000] BOOTMEM [ 0.000000] #31 [0001a00000 - 0001a0c000] BOOTMEM [ 0.000000] #32 [00017c9fc0 - 00017c9fc4] BOOTMEM [ 0.000000] #33 [00017ca000 - 00017ca004] BOOTMEM [ 0.000000] #34 [00017ca040 - 00017ca048] BOOTMEM [ 0.000000] #35 [00017ca080 - 00017ca088] BOOTMEM [ 0.000000] #36 [00017ca0c0 - 00017ca168] BOOTMEM [ 0.000000] #37 [00017ca180 - 00017ca1e8] BOOTMEM [ 0.000000] #38 [00017c7fc0 - 00017c9fc0] BOOTMEM [ 0.000000] #39 [000180c000 - 000184c000] BOOTMEM [ 0.000000] #40 [00017ca200 - 00017ea200] BOOTMEM [ 0.000000] Memory: 506328k/515264k available (1946k kernel code, 8484k reserved, 1144k data, 288k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd37000 - 0xfffff000 (2848 kB) [ 0.000000] vmalloc : 0xdff30000 - 0xffd35000 ( 510 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf730000 ( 503 MB) [ 0.000000] .init : 0xc1305000 - 0xc134d000 ( 288 kB) [ 0.000000] .data : 0xc11e6a99 - 0xc1304aa0 (1144 kB) [ 0.000000] .text : 0xc1000000 - 0xc11e6a99 (1946 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2793.087 MHz processor. [ 0.012009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.17 BogoMIPS (lpj=11172348) [ 0.020005] pid_max: default: 32768 minimum: 301 [ 0.024040] Mount-cache hash table entries: 512 [ 0.028186] Initializing cgroup subsys ns [ 0.032010] Initializing cgroup subsys cpuacct [ 0.036008] Initializing cgroup subsys devices [ 0.040004] Initializing cgroup subsys freezer [ 0.044030] CPU0: Hyper-Threading is disabled [ 0.048005] mce: CPU supports 4 MCE banks [ 0.052015] CPU0: Thermal monitoring enabled (TM1) [ 0.056006] using mwait in idle threads. [ 0.064007] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.076014] ... version: 0 [ 0.080003] ... bit width: 40 [ 0.084003] ... generic registers: 18 [ 0.088004] ... value mask: 000000ffffffffff [ 0.092003] ... max period: 0000007fffffffff [ 0.096003] ... fixed-purpose events: 0 [ 0.100003] ... event mask: 000000000003ffff [ 0.104396] SMP alternatives: switching to UP code [ 0.112863] ACPI: Core revision 20100428 [ 0.127011] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.132138] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.175765] CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 01 [ 0.188000] Brought up 1 CPUs [ 0.188007] Total of 1 processors activated (5586.17 BogoMIPS). [ 0.192193] devtmpfs: initialized [ 0.196564] Time: 20:12:46 Date: 06/05/10 [ 0.200055] NET: Registered protocol family 16 [ 0.204143] ACPI: bus type pci registered [ 0.208095] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 0.212003] PCI: Using configuration type 1 for base access [ 0.216783] bio: create slab <bio-0> at 0 [ 0.224154] ACPI: Executed 1 blocks of module-level executable AML code [ 0.242295] ACPI: Interpreter enabled [ 0.244010] ACPI: (supports S0 S1 S3 S4 S5) [ 0.264006] ACPI: Using IOAPIC for interrupt routing [ 0.282227] ACPI Warning: Incorrect checksum in table [OEMB] - 0xB7, should be 0xA8 (20100428/tbutils-314) [ 0.292180] ACPI: No dock devices found. [ 0.296007] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.304168] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.308504] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.312711] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO [ 0.316005] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO [ 0.320404] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.334712] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.368154] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.408151] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.447676] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.482430] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.512151] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.554434] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.594432] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.630450] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.632013] vgaarb: loaded [ 0.636148] SCSI subsystem initialized [ 0.640161] PCI: Using ACPI for IRQ routing [ 0.644333] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.662284] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.666015] Switching to clocksource tsc [ 0.668062] pnp: PnP ACPI init [ 0.704610] ACPI: bus type pnp registered [ 0.760006] pnp: PnP ACPI: found 15 devices [ 0.810140] ACPI: ACPI bus type pnp unregistered [ 0.865469] system 00:0b: [io 0x0680-0x06ff] has been reserved [ 0.936366] system 00:0b: [io 0x0290-0x0297] has been reserved [ 1.007285] system 00:0c: [io 0x04d0-0x04d1] has been reserved [ 1.078188] system 00:0c: [io 0x0800-0x087f] has been reserved [ 1.149102] system 00:0c: [io 0x0480-0x04bf] has been reserved [ 1.220019] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved [ 1.299248] system 00:0c: [mem 0xffb00000-0xffbfffff] could not be reserved [ 1.382648] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.466031] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.545268] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.628656] system 00:0e: [mem 0x000c0000-0x000dffff] could not be reserved [ 1.712047] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.795436] system 00:0e: [mem 0x00100000-0x1f7effff] could not be reserved [ 1.878830] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved [ 1.992870] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff] [ 2.074217] pci 0000:00:1f.1: BAR 5: set to [mem 0x20000000-0x200003ff] (PCI address [0x20000000-0x200003ff] [ 2.191908] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 2.254505] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 2.327506] pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 2.408814] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 2.481888] NET: Registered protocol family 2 [ 2.534178] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 2.617717] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 2.704304] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 2.783661] TCP: Hash tables configured (established 16384 bind 16384) [ 2.861855] TCP reno registered [ 2.899496] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 2.969374] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 3.044586] NET: Registered protocol family 1 [ 3.096897] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling [ 3.185679] msgmni has been set to 988 [ 3.230851] alg: No test for stdrng (krng) [ 3.280051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.368655] io scheduler noop registered [ 3.415645] io scheduler deadline registered [ 3.466869] io scheduler cfq registered (default) [ 3.525713] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.601918] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.673957] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3.748966] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 3.821924] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.907533] scsi0 : ata_piix [ 3.942138] scsi1 : ata_piix [ 3.979186] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 4.062605] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 4.146207] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 4.240206] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.299684] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.360403] mice: PS/2 mouse device common for all mice [ 4.423094] rtc_cmos 00:02: RTC can wake from S4 [ 4.478510] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 4.551560] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 4.627668] cpuidle: using governor ladder [ 4.676724] cpuidle: using governor menu [ 4.723900] TCP cubic registered [ 4.762600] NET: Registered protocol family 17 [ 4.815863] Using IPI No-Shortcut mode [ 4.861076] Magic number: 14:663:244 [ 4.906153] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 5.009366] rtc_cmos 00:02: setting system clock to 2010-06-05 20:12:52 UTC (1275768772) [ 5.210610] ata1.00: ATA-6: WDC WD800JB-00FMA0, 13.03G13, max UDMA/100 [ 5.288836] ata1.00: 156301488 sectors, multi 16: LBA [ 5.350420] ata1.00: limited to UDMA/33 due to 40-wire cable [ 5.434508] ata1.00: configured for UDMA/33 [ 5.484780] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00FM 13.0 PQ: 0 ANSI: 5 [ 5.582015] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 5.673863] sd 0:0:0:0: [sda] Write Protect is off [ 5.731305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.839828] sda: sda1 sda2 [ 5.886987] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.947611] EXT3-fs: barriers not enabled [ 6.008250] kjournald starting. Commit interval 5 seconds [ 6.074030] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 6.151560] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 6.230897] Freeing unused kernel memory: 288k freed [ 6.290681] Write protecting the kernel text: 1948k [ 6.349135] Write protecting the kernel read-only data: 820k [ 8.605483] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 8.770289] ACPI: Power Button [PWRB] [ 8.822377] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 8.931552] usbcore: registered new interface driver usbfs [ 8.998781] usbcore: registered new interface driver hub [ 9.063061] ACPI: Power Button [PWRF] [ 9.110804] usbcore: registered new device driver usb [ 9.176133] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.257773] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 9.343941] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 9.407023] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 9.502182] ehci_hcd 0000:00:1d.7: debug port 1 [ 9.561483] Linux agpgart interface v0.103 [ 9.615298] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe77bc00 [ 9.696050] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 9.770150] hub 1-0:1.0: USB hub found [ 9.817114] hub 1-0:1.0: 8 ports detected [ 9.966145] uhci_hcd: USB Universal Host Controller Interface driver [ 10.043369] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.131078] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 10.201151] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 10.297471] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0 [ 10.368646] hub 2-0:1.0: USB hub found [ 10.413956] hub 2-0:1.0: 2 ports detected [ 10.462755] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 10.548952] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 10.611986] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 10.701023] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef00 [ 10.770709] hub 3-0:1.0: USB hub found [ 10.817336] hub 3-0:1.0: 2 ports detected [ 10.866266] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 10.960749] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.037917] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 11.111107] e100: Copyright(c) 1999-2006 Intel Corporation [ 11.184052] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 11.273144] e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 11.355161] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20 [ 11.428220] hub 4-0:1.0: USB hub found [ 11.504810] e100 0000:01:08.0: eth0: addr 0xfe5ef000, irq 20, MAC addr 00:13:d4:79:a3:67 [ 11.602459] hub 4-0:1.0: 2 ports detected [ 11.675832] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 11.743624] [drm] Initialized drm 1.1.0 20060810 [ 11.815875] agpgart-intel 0000:00:00.0: detected 8060K stolen memory [ 11.916905] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [ 11.998948] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.086056] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 12.149296] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 12.238371] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40 [ 12.308612] hub 5-0:1.0: USB hub found [ 12.353900] hub 5-0:1.0: 2 ports detected [ 12.467069] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3 [ 12.586016] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 13.100023] intel8x0_measure_ac97_clock: measured 55813 usecs (2689 samples) [ 13.184478] intel8x0: clocking to 48000 [ 13.232336] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.340962] [drm] set up 7M of stolen space [ 13.434270] [drm] initialized overlay support [ 13.486980] before intel_fbdev_init [ 13.528890] intel_fbdev_init() [ 13.567923] before drm_fb_helper_init [ 13.612085] before add_all_connectors [ 13.656344] before initial_config [ 13.696182] before disable_unused_functions [ 13.792166] before parse_command_line [ 13.836076] before probe_connector_modes [ 13.994170] before setup_crtcs [ 14.030996] drm_fb_helper_single_fb_probe() [ 14.081169] before push down [ 14.115646] intel_fb_find_or_create_single() [ 14.166800] intelfb_create [ 14.202779] before i915_gem_object_pin [ 14.259875] before framebuffer_alloc [ 14.304216] before intel_framebuffer_init [ 14.353406] before fb_alloc_cmap [ 14.392080] before drm_fb_helper_fill [ 14.435905] before vga_switcheroo_client_fb_set [ 14.490177] intelfb_create() end [ 14.528857] intel_fb_find_or_create_single() end [ 14.584173] after push down [ 14.617653] before register_framebuffer [ 14.663613] register_framebuffer() [ 14.704375] before remove_conflicting [ 14.748253] before device_create [ 14.791508] after device_create [ 14.829279] before fb_init_device [ 14.870690] before fb_var_to_videomode [ 14.915642] before fb_add_videomode [ 14.957811] before fb_notifier_call_chain [ 15.006095] fbcon_fb_registered() [ 15.045870] fbcon_takeover() [ 15.080364] take_over_console() [ 15.118003] register_con_driver() [ 15.157725] fbcon_startup() [ 15.157728] before fb_open [ 15.157729] after fb_open [ 15.158332] before vc_resize [ 15.158342] fbcon_startup() end [ 15.328591] register_con_driver() end [ 15.372509] bind_con_driver() [ 15.408023] before acquire_console_sem() [ 15.455003] after acquire_console_sem() [ 15.500959] after for, retval=0 [ 15.538599] before deflt [ 15.568960] after deflt [ 15.598284] for i=0 [ 15.623446] ------------[ cut here ]------------ [ 15.678771] WARNING: at drivers/char/vt.c:633 save_screen+0x24/0x34() [ 15.755921] Hardware name: To Be Filled By O.E.M. [ 15.812276] Modules linked in: i915(+) drm_kms_helper snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm drm snd_timer e100 ie [ 16.124421] Pid: 115, comm: modprobe Not tainted 2.6.35-rc1-git2 #14 [ 16.200533] Call Trace: [ 16.229861] [<c1026d50>] ? warn_slowpath_common+0x6a/0x7b [ 16.295575] [<c1149da6>] ? save_screen+0x24/0x34 [ 16.351930] [<c1026d6e>] ? warn_slowpath_null+0xd/0x10 [ 16.414525] [<c1149da6>] ? save_screen+0x24/0x34 [ 16.470881] [<c114cb8d>] ? take_over_console+0x1c5/0x335 [ 16.535558] [<c11099b0>] ? fbcon_takeover+0x66/0xb0 [ 16.595032] [<c110c483>] ? fbcon_event_notify+0x1b2/0x4b0 [ 16.660750] [<c11e44be>] ? schedule+0x306/0x354 [ 16.718459] [<c103a0ff>] ? notifier_call_chain+0x23/0x46 [ 16.783132] [<c103a346>] ? __blocking_notifier_call_chain+0x39/0x4c [ 16.859244] [<c103a362>] ? blocking_notifier_call_chain+0x9/0xc [ 16.931200] [<c110339f>] ? register_framebuffer+0x255/0x272 [ 16.999000] [<e0083633>] ? drm_fb_helper_single_fb_probe+0x1e2/0x291 [drm_kms_helper] [ 17.093824] [<e0083b70>] ? drm_fb_helper_initial_config+0x48e/0x49e [drm_kms_helper] [ 17.187611] [<c11e45c3>] ? _cond_resched+0x26/0x3d [ 17.246073] [<e023ed37>] ? intel_fbdev_init+0x79/0x82 [i915] [ 17.314897] [<e02269a3>] ? i915_driver_load+0xd93/0xe5b [i915] [ 17.385803] [<e0264005>] ? drm_get_dev+0x2cf/0x3b9 [drm] [ 17.450473] [<c10fc86f>] ? local_pci_probe+0xb/0xc [ 17.508909] [<c10fd2c6>] ? pci_device_probe+0x41/0x63 [ 17.570463] [<c1156c4b>] ? driver_probe_device+0x8c/0x110 [ 17.636180] [<c1156d0f>] ? __driver_attach+0x40/0x5b [ 17.696696] [<c11564c5>] ? bus_for_each_dev+0x37/0x5f [ 17.758249] [<c1156b1a>] ? driver_attach+0x11/0x13 [ 17.816687] [<c1156ccf>] ? __driver_attach+0x0/0x5b [ 17.876167] [<c1156840>] ? bus_add_driver+0x87/0x1bb [ 17.936682] [<c10ee9c9>] ? kset_find_obj+0x20/0x4a [ 17.995116] [<c1156f28>] ? driver_register+0x7a/0xd9 [ 18.055631] [<c10fd491>] ? __pci_register_driver+0x33/0x89 [ 18.122399] [<e009d000>] ? i915_init+0x0/0x85 [i915] [ 18.182901] [<c100112d>] ? do_one_initcall+0x44/0x120 [ 18.244459] [<c1048760>] ? sys_init_module+0xa7/0x1d7 [ 18.306014] [<c1002757>] ? sysenter_do_call+0x12/0x26 [ 18.367568] ---[ end trace e5cd889fd9f41fa5 ]--- [ 18.429997] fbcon_init() [ 18.460409] before con2fb_acquire_newinfo [ 18.508363] before set mode [ 18.541735] drm_fb_helper_set_par(), info=de583800 [ 18.599025] var=de583830 [ 18.629282] dev=de582000 [ 18.660065] drm_fb_helper_set_par for i=0 [ 18.708050] fb_helper=de404b00 [ 18.744600] fb_helper->crtc_info=de5aac00 [ 18.792530] fb_helper->crtc_info[i].mode_set=de5aac04 [ 18.852943] crtc=df04e000 [ 18.884240] crtc->funcs=e02460bc [ 18.922816] crtc->funcs->set_config=e0084848 [ 19.072527] drm_fb_helper_set_par for i=1 [ 19.120526] fb_helper=de404b00 [ 19.157086] fb_helper->crtc_info=de5aac00 [ 19.205018] fb_helper->crtc_info[i].mode_set=de5aac30 [ 19.265431] crtc=(null) [ 19.295315] BUG: unable to handle kernel NULL pointer dereference at 000000f0 [ 19.298644] IP: [<e00833c7>] drm_fb_helper_set_par+0xc1/0x14b [drm_kms_helper] [ 19.298644] *pde = 00000000 [ 19.298644] Oops: 0000 [#1] SMP [ 19.298644] last sysfs file: /sys/devices/virtual/net/lo/operstate [ 19.298644] Modules linked in: i915(+) drm_kms_helper snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm drm snd_timer e100 ie [ 19.298644] [ 19.298644] Pid: 115, comm: modprobe Tainted: G W 2.6.35-rc1-git2 #14 P4P800-VM/To Be Filled By O.E.M. [ 19.298644] EIP: 0060:[<e00833c7>] EFLAGS: 00010296 CPU: 0 [ 19.298644] EIP is at drm_fb_helper_set_par+0xc1/0x14b [drm_kms_helper] [ 19.298644] EAX: 0000001e EBX: de404b00 ECX: df2dbc54 EDX: e0085637 [ 19.298644] ESI: 00000001 EDI: 00000000 EBP: de582290 ESP: df2dbc50 [ 19.298644] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 19.298644] Process modprobe (pid: 115, ti=df2da000 task=df2ad8f0 task.ti=df2da000) [ 19.298644] Stack: [ 19.298644] e0085637 00000000 0000002c df004000 de583800 df32fe00 c13c6158 c110be62 [ 19.298644] <0> 00000100 000000a0 df004000 00000040 00000001 00000001 00000019 00000050 [ 19.298644] <0> 00000000 df004000 c12027f0 00000000 00000000 c1149905 df004000 00000000 [ 19.298644] Call Trace: [ 19.298644] [<c110be62>] ? fbcon_init+0x294/0x3a8 [ 19.298644] [<c1149905>] ? visual_init+0x7f/0xb9 [ 19.298644] [<c114cbb7>] ? take_over_console+0x1ef/0x335 [ 19.298644] [<c11099b0>] ? fbcon_takeover+0x66/0xb0 [ 19.298644] [<c110c483>] ? fbcon_event_notify+0x1b2/0x4b0 [ 19.298644] [<c11e44be>] ? schedule+0x306/0x354 [ 19.298644] [<c103a0ff>] ? notifier_call_chain+0x23/0x46 [ 19.298644] [<c103a346>] ? __blocking_notifier_call_chain+0x39/0x4c [ 19.298644] [<c103a362>] ? blocking_notifier_call_chain+0x9/0xc [ 19.298644] [<c110339f>] ? register_framebuffer+0x255/0x272 [ 19.298644] [<e0083633>] ? drm_fb_helper_single_fb_probe+0x1e2/0x291 [drm_kms_helper] [ 19.298644] [<e0083b70>] ? drm_fb_helper_initial_config+0x48e/0x49e [drm_kms_helper] [ 19.298644] [<c11e45c3>] ? _cond_resched+0x26/0x3d [ 19.298644] [<e023ed37>] ? intel_fbdev_init+0x79/0x82 [i915] [ 19.298644] [<e02269a3>] ? i915_driver_load+0xd93/0xe5b [i915] [ 19.298644] [<e0264005>] ? drm_get_dev+0x2cf/0x3b9 [drm] [ 19.298644] [<c10fc86f>] ? local_pci_probe+0xb/0xc [ 19.298644] [<c10fd2c6>] ? pci_device_probe+0x41/0x63 [ 19.298644] [<c1156c4b>] ? driver_probe_device+0x8c/0x110 [ 19.298644] [<c1156d0f>] ? __driver_attach+0x40/0x5b [ 19.298644] [<c11564c5>] ? bus_for_each_dev+0x37/0x5f [ 19.298644] [<c1156b1a>] ? driver_attach+0x11/0x13 [ 19.298644] [<c1156ccf>] ? __driver_attach+0x0/0x5b [ 19.298644] [<c1156840>] ? bus_add_driver+0x87/0x1bb [ 19.298644] [<c10ee9c9>] ? kset_find_obj+0x20/0x4a [ 19.298644] [<c1156f28>] ? driver_register+0x7a/0xd9 [ 19.298644] [<c10fd491>] ? __pci_register_driver+0x33/0x89 [ 19.298644] [<e009d000>] ? i915_init+0x0/0x85 [i915] [ 19.298644] [<c100112d>] ? do_one_initcall+0x44/0x120 [ 19.298644] [<c1048760>] ? sys_init_module+0xa7/0x1d7 [ 19.298644] [<c1002757>] ? sysenter_do_call+0x12/0x26 [ 19.298644] Code: 6b d6 2c 8b 43 10 01 d0 8b 78 10 83 c0 04 50 68 12 56 08 e0 89 54 24 20 e8 f3 0c 16 e1 83 c4 20 57 68 [ 19.298644] EIP: [<e00833c7>] drm_fb_helper_set_par+0xc1/0x14b [drm_kms_helper] SS:ESP 0068:df2dbc50 [ 19.298644] CR2: 00000000000000f0 [ 23.239762] ---[ end trace e5cd889fd9f41fa6 ]---
Seems to be very nasty NULL pointer dereference - it's under acquire_console_sem so nothing is printed... Had to comment out acquire_console_sem() in bind_con_driver() to get this.
NULL crtc is dereferenced in drm_fb_helper_set_par(): ... for (i = 0; i < fb_helper->crtc_count; i++) { printk("drm_fb_helper_set_par for i=%d\n", i); printk("fb_helper=%p\n", fb_helper); printk("fb_helper->crtc_info=%p\n", fb_helper->crtc_info); crtc = fb_helper->crtc_info[i].mode_set.crtc; printk("fb_helper->crtc_info[i].mode_set=%p\n", &fb_helper->crtc_info[i].mode_set); printk("crtc=%p\n", crtc); printk("crtc->funcs=%p\n", crtc->funcs); printk("crtc->funcs->set_config=%p\n", crtc->funcs->set_config); ret = crtc->funcs->set_config(&fb_helper->crtc_info[i].mode_set); if (ret) { mutex_unlock(&dev->mode_config.mutex); return ret; } }
As both 8be48d924c307e72e3797ab5bde81b07a1ccc52d and 386516744ba45d50f42c6999151cc210cb4f96e4 are very large, I can't find the bug.
On Sun, Jun 6, 2010 at 6:28 AM, Ondrej Zary linux@rainbow-software.org wrote:
On Saturday 05 June 2010 02:23:27 Eric Anholt wrote:
On Fri, 4 Jun 2010 22:01:28 +0200, Ondrej Zary linux@rainbow-software.org wrote:
Hello, I'm testing 2.6.35-rc1 kernel on Asus P4P800-VM (i865G chipset). After loading i915 module, the screen goes blank and the kernel hangs completely (same with 2.6.35-rc1-git2). This does not happen with "i915.modeset=0" parameter.
This problem does not appear with 2.6.34. Is this a known regression?
Not known as far as I know -- we'd enjoy a bisect with a bug report on bugs.freedesktop.org.
Can you try the attached patch?
Dave.
On Sunday 06 June 2010 11:04:44 Dave Airlie wrote:
On Sun, Jun 6, 2010 at 6:28 AM, Ondrej Zary linux@rainbow-software.org
wrote:
On Saturday 05 June 2010 02:23:27 Eric Anholt wrote:
On Fri, 4 Jun 2010 22:01:28 +0200, Ondrej Zary
linux@rainbow-software.org wrote:
Hello, I'm testing 2.6.35-rc1 kernel on Asus P4P800-VM (i865G chipset). After loading i915 module, the screen goes blank and the kernel hangs completely (same with 2.6.35-rc1-git2). This does not happen with "i915.modeset=0" parameter.
This problem does not appear with 2.6.34. Is this a known regression?
Not known as far as I know -- we'd enjoy a bisect with a bug report on bugs.freedesktop.org.
Can you try the attached patch?
Thanks, applied it on 2.6.35-rc2 and it seems to work fine.
dri-devel@lists.freedesktop.org
-
Dave Airlie -
Eric Anholt -
Ondrej Zary