The display-timing and delay are included in the panel driver. So it should be removed in dts.

Signed-off-by: Hoegeun Kwon hoegeun.kwon@samsung.com ---

Hi Krzysztof,

This patch was rebased to the mainline (v4.14-rc1).

Best regards, Hoegeun

arch/arm/boot/dts/exynos3250-rinato.dts | 22 ---------------------- 1 file changed, 22 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 0b45467..ff792ff 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -227,28 +227,6 @@ vci-supply = <&ldo20_reg>; reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; - power-on-delay= <30>; - power-off-delay= <120>; - reset-delay = <5>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <29>; - panel-height-mm = <29>; - - display-timings { - timing-0 { - clock-frequency = <4600000>; - hactive = <320>; - vactive = <320>; - hfront-porch = <1>; - hback-porch = <1>; - hsync-len = <1>; - vfront-porch = <150>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; }; };