Document the device tree bindings for the Adreno GMU device available on Adreno a6xx targets.

Signed-off-by: Jordan Crouse jcrouse@codeaurora.org --- .../devicetree/bindings/display/msm/gmu.txt | 54 ++++++++++++++++++++++ .../devicetree/bindings/display/msm/gpu.txt | 10 +++- 2 files changed, 62 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/gmu.txt

diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt new file mode 100644 index 000000000000..f65bb49fff36 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt @@ -0,0 +1,54 @@ +Qualcomm adreno/snapdragon GMU (Graphics management unit) + +The GMU is a programmable power controller for the GPU. the CPU controls the +GMU which in turn handles power controls for the GPU. + +Required properties: +- compatible: + * "qcom,adreno-gmu" +- reg: Physical base address and length of the GMU registers. +- reg-names: Matching names for the register regions + * "gmu" + * "gmu_pdc" +- interrupts: The interrupt signals from the GMU. +- interrupt-names: Matching names for the interrupts + * "hfi" + * "gmu" +- clocks: phandles to the device clocks +- clock-names: Matching names for the clocks + * "gmu" + * "cxo" + * "axi" + * "mnoc" +- power-domains: should be <&clock_gpucc GPU_CX_GDSC> +- iommus: phandle to the adreno iommu +- operating-points-v2: phandle to the OPP operating points + +Example: + +/ { + ... + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, + <0xb200000 0x300000>; + reg-names = "gmu", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&clock_gpucc GPU_CC_CX_GMU_CLK>, + <&clock_gpucc GPU_CC_CXO_CLK>, + <&clock_gcc GCC_DDRSS_GPU_AXI_CLK>, + <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&clock_gpucc GPU_CX_GDSC>; + iommus = <&adreno_smmu 5>; + + i operating-points-v2 = <&gmu_opp_table>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 43fac0fe09bb..544a7510166b 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -8,12 +8,18 @@ Required properties: with the chip-id. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. -- clocks: device clocks + +Optional properties. +- clocks: device clocks. Required for a3xx, a4xx and a5xx targets. a6xx and + newer with a GMU attached do not have direct clock control from the CPU and + do not need to provide clock properties. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required: +- clock-names: the following clocks can be provided: * "core" * "iface" * "mem_iface" +- qcom,gmu: For a6xx and newer targets a phandle to the GMU device that will + control the power for the GPU

Example:

Add the nodes to describe the Adreno GPU and GMU devices.

Signed-off-by: Jordan Crouse jcrouse@codeaurora.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 119 +++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 16b5f356ec96..854da6604417 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -312,4 +312,123 @@ }; }; }; + + adreno_smmu: arm,smmu-adreno@5040000 { + compatible = "qcom,msm8996-smmu-v2"; + reg = <0x5040000 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; + clocks = <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&clock_gcc GCC_GPU_CFG_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&clock_gpucc GPU_CX_GDSC>; + }; + + gpu_opp_table: adreno-opp-table { + compatible = "operating-points-v2"; + + opp-710000000 { + opp-hz = /bits/ 64 <710000000>; + qcom,level = <416>; + }; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + qcom,level = <384>; + }; + + opp-596000000 { + opp-hz = /bits/ 64 <596000000>; + qcom,level = <320>; + }; + + opp-520000000 { + opp-hz = /bits/ 64 <520000000>; + qcom,level = <256>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + qcom,level = <192>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + qcom,level = <128>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + qcom,level = <64>; + }; + }; + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0x5000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + /* + * Look ma, no clocks! The GPU clocks and power are controlled + * entirely by the GMU + */ + + interrupts = <0 300 0>; + interrupt-names = "kgsl_3d0_irq"; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + gmu = <&gmu>; + }; + + gmu_opp_table: adreno-gmu-opp-table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + qcom,level = <128>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + qcom,level = <48>; + }; + }; + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, <0xb200000 0x300000>; + reg-names = "gmu", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&clock_gpucc GPU_CC_CX_GMU_CLK>, + <&clock_gpucc GPU_CC_CXO_CLK>, + <&clock_gcc GCC_DDRSS_GPU_AXI_CLK>, + <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&clock_gpucc GPU_CX_GDSC>; + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + }; };