This adds a driver for panels based on the WideChips WS2401 display controller. This display controller is used in the Samsung LMS380KF01 display found in the Samsung GT-I8160 (Codina) mobile phone and possibly others.

As is common with Samsung displays manufacturer commands are necessary to configure the display to a working state.

The display optionally supports internal backlight control, but can also use an external backlight.

This driver re-uses the DBI infrastructure to communicate with the display.

Cc: phone-devel@vger.kernel.org Cc: Douglas Anderson dianders@chromium.org Cc: Noralf Trønnes noralf@tronnes.org Signed-off-by: Linus Walleij linus.walleij@linaro.org --- MAINTAINERS | 7 + drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-widechips-ws2401.c | 404 ++++++++++++++++++ 4 files changed, 421 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-widechips-ws2401.c

diff --git a/MAINTAINERS b/MAINTAINERS index bd7aff0c120f..8bfa89f61220 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5946,6 +5946,13 @@ S: Maintained T: git git://anongit.freedesktop.org/drm/drm-misc F: drivers/gpu/drm/vboxvideo/

+DRM DRIVER FOR WIDECHIPS WS2401 PANELS +M: Linus Walleij linus.walleij@linaro.org +S: Maintained +T: git git://anongit.freedesktop.org/drm/drm-misc +F: Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml +F: drivers/gpu/drm/panel/panel-widechips-ws2401.c + DRM DRIVER FOR VMWARE VIRTUAL GPU M: "VMware Graphics" linux-graphics-maintainer@vmware.com M: Roland Scheidegger sroland@vmware.com diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 4894913936e9..f4fe1dba9912 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -552,6 +552,15 @@ config DRM_PANEL_VISIONOX_RM69299 Say Y here if you want to enable support for Visionox RM69299 DSI Video Mode panel.

+config DRM_PANEL_WIDECHIPS_WS2401 + tristate "Widechips WS2401 DPI panel driver" + depends on OF && SPI && GPIOLIB + depends on BACKLIGHT_CLASS_DEVICE + select DRM_MIPI_DBI + help + Say Y here if you want to enable support for the Widechips + WS2401 DPI 480x800 display controller. + config DRM_PANEL_XINPENG_XPP055C272 tristate "Xinpeng XPP055C272 panel driver" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index cae4d976c069..d94c27df17aa 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -58,4 +58,5 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o +obj-$(CONFIG_DRM_PANEL_WIDECHIPS_WS2401) += panel-widechips-ws2401.o obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o diff --git a/drivers/gpu/drm/panel/panel-widechips-ws2401.c b/drivers/gpu/drm/panel/panel-widechips-ws2401.c new file mode 100644 index 000000000000..d15870301174 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-widechips-ws2401.c @@ -0,0 +1,404 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Panel driver for the WideChips WS2401 480x800 DPI RGB panel, used in + * the Samsung Mobile Display (SMD) LMS380KF01. + * Found in the Samsung Galaxy Ace 2 GT-I8160 mobile phone. + * Linus Walleij linus.walleij@linaro.org + * Inspired by code and know-how in the vendor driver by Gareth Phillips. + */ +#include <drm/drm_modes.h> +#include <drm/drm_mipi_dbi.h> +#include <drm/drm_panel.h> + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <video/mipi_display.h> + +#define WS2401_RESCTL 0xb8 /* Resolution select control */ +#define WS2401_PSMPS 0xbd /* SMPS positive control */ +#define WS2401_NSMPS 0xbe /* SMPS negative control */ +#define WS2401_SMPS 0xbf +#define WS2401_BCMODE 0xc1 /* Backlight control mode */ +#define WS2401_WRBLCTL 0xc3 /* Backlight control */ +#define WS2401_WRDISBV 0xc4 /* Write manual brightness */ +#define WS2401_WRCTRLD 0xc6 /* Write BL control */ +#define WS2401_WRMIE 0xc7 /* Write MIE mode */ +#define WS2401_READ_ID1 0xda /* Read panel ID 1 */ +#define WS2401_READ_ID2 0xdb /* Read panel ID 2 */ +#define WS2401_READ_ID3 0xdc /* Read panel ID 3 */ +#define WS2401_PASSWD1 0xf0 /* Password command for level 2 */ +#define WS2401_DISCTL 0xf2 /* Display control */ +#define WS2401_PWRCTL 0xf3 /* Power control */ +#define WS2401_VCOMCTL 0xf4 /* VCOM control */ +#define WS2401_SRCCTL 0xf5 /* Source control */ +#define WS2401_PANELCTL 0xf6 /* Panel control */ + +static const u8 ws2401_dbi_read_commands[] = { + WS2401_READ_ID1, + WS2401_READ_ID2, + WS2401_READ_ID3, + 0, /* sentinel */ +}; + +/** + * struct ws2401 - state container for a panel controlled by the WS2401 + * controller + */ +struct ws2401 { + /** @dev: the container device */ + struct device *dev; + /** @dbi: the DBI bus abstraction handle */ + struct mipi_dbi dbi; + /** @panel: the DRM panel instance for this device */ + struct drm_panel panel; + /** @width: the width of this panel in mm */ + u32 width; + /** @height: the height of this panel in mm */ + u32 height; + /** @reset: reset GPIO line */ + struct gpio_desc *reset; + /** @regulators: VCCIO and VIO supply regulators */ + struct regulator_bulk_data regulators[2]; + /** @bl: Backlight, if using internal backlight */ + struct backlight_device *bl; +}; + +static const struct drm_display_mode lms380kf01_480_800_mode = { + /* + * The vendor driver states that the "SMD panel" has a clock + * frequency of 49920000 Hz / 2 = 24960000 Hz. + */ + .clock = 24960, + .hdisplay = 480, + .hsync_start = 480 + 8, + .hsync_end = 480 + 8 + 10, + .htotal = 480 + 8 + 10 + 8, + .vdisplay = 800, + .vsync_start = 800 + 8, + .vsync_end = 800 + 8 + 2, + .vtotal = 800 + 8 + 2 + 18, + .width_mm = 50, + .height_mm = 84, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, +}; + +static inline struct ws2401 *to_ws2401(struct drm_panel *panel) +{ + return container_of(panel, struct ws2401, panel); +} + +#define ws2401_command(ws, cmd, seq...) \ +({ \ + struct mipi_dbi *dbi = &ws->dbi; \ + int ret; \ + ret = mipi_dbi_command(dbi, cmd, seq); \ + if (ret) { \ + dev_err(ws->dev, "failure in writing command %02x\n", cmd); \ + } \ +}) + +static void ws2401_read_mtp_id(struct ws2401 *ws) +{ + struct mipi_dbi *dbi = &ws->dbi; + u8 id1, id2, id3; + int ret; + + ret = mipi_dbi_command_read(dbi, WS2401_READ_ID1, &id1); + if (ret) { + dev_err(ws->dev, "unable to read MTP ID 1\n"); + return; + } + ret = mipi_dbi_command_read(dbi, WS2401_READ_ID2, &id1); + if (ret) { + dev_err(ws->dev, "unable to read MTP ID 2\n"); + return; + } + ret = mipi_dbi_command_read(dbi, WS2401_READ_ID3, &id1); + if (ret) { + dev_err(ws->dev, "unable to read MTP ID 3\n"); + return; + } + dev_info(ws->dev, "MTP ID: %02x %02x %02x\n", id1, id2, id3); +} + +static int ws2401_power_on(struct ws2401 *ws) +{ + int ret; + + /* Power up */ + ret = regulator_bulk_enable(ARRAY_SIZE(ws->regulators), + ws->regulators); + if (ret) { + dev_err(ws->dev, "failed to enable regulators: %d\n", ret); + return ret; + } + msleep(10); + + /* Assert reset >=1 ms */ + gpiod_set_value_cansleep(ws->reset, 1); + usleep_range(1000, 5000); + /* De-assert reset */ + gpiod_set_value_cansleep(ws->reset, 0); + /* Wait >= 10 ms */ + msleep(10); + dev_dbg(ws->dev, "de-asserted RESET\n"); + + /* + * Exit sleep mode and initialize display - some hammering is + * necessary. + */ + ws2401_command(ws, MIPI_DCS_EXIT_SLEEP_MODE); + ws2401_command(ws, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(50); + + /* Magic to unlock level 2 control of the display */ + ws2401_command(ws, WS2401_PASSWD1, 0x5a, 0x5a); + /* Configure resolution to 480RGBx800 */ + ws2401_command(ws, WS2401_RESCTL, 0x12); + /* + * Set addressing mode Flip V(d0), Flip H(d1) RGB/BGR(d3) + * The vendor driver has 0x09 here setting d3 and resulting in + * inverted colors when used with DRM. + */ + ws2401_command(ws, MIPI_DCS_SET_ADDRESS_MODE, 0x01); + /* Set pixel format: 24 bpp */ + ws2401_command(ws, MIPI_DCS_SET_PIXEL_FORMAT, 0x70); + ws2401_command(ws, WS2401_PSMPS, 0x06, 0x01, /* DDVDH: 4.6v */ + 0x78, 0x06, 0x10, 0x37); + ws2401_command(ws, WS2401_NSMPS, 0x06, 0x01, /* DDVDH: -4.6v */ + 0x78, 0x06, 0x12, 0x37); + ws2401_command(ws, WS2401_SMPS, 0x02, 0x0d); + ws2401_command(ws, WS2401_PWRCTL, 0x10, 0xA9, 0x00, 0x01, 0x44, + 0xF4, /* VGH:16.1v, VGL:-13.8v */ + 0x50, /* GREFP:4.2v(dft) */ + 0x50, /* GREFN:-4.2v(dft) */ + 0x00, + 0x3C); /* VOUTL:-10v(dft) */ + ws2401_command(ws, WS2401_SRCCTL, 0x03, 0x0C, 0x00, 0x00, 0x00, + 0x01, /* 2 dot inversion */ + 0x01, 0x06, 0x00); + ws2401_command(ws, WS2401_PANELCTL, 0x14, 0x00, 0x80, 0x00, 0x00); + + if (ws->bl) + ws2401_command(ws, WS2401_WRCTRLD, 0x2c); + else + ws2401_command(ws, WS2401_WRCTRLD, 0x00); + + ws2401_read_mtp_id(ws); + + return 0; +} + +static int ws2401_power_off(struct ws2401 *ws) +{ + /* Disable backlight */ + if (ws->bl) + ws2401_command(ws, WS2401_WRCTRLD, 0x00); + /* Go into RESET and disable regulators */ + gpiod_set_value_cansleep(ws->reset, 1); + return regulator_bulk_disable(ARRAY_SIZE(ws->regulators), + ws->regulators); +} + +static int ws2401_unprepare(struct drm_panel *panel) +{ + struct ws2401 *ws = to_ws2401(panel); + + ws2401_command(ws, MIPI_DCS_ENTER_SLEEP_MODE); + msleep(120); + return ws2401_power_off(to_ws2401(panel)); +} + +static int ws2401_disable(struct drm_panel *panel) +{ + struct ws2401 *ws = to_ws2401(panel); + + ws2401_command(ws, MIPI_DCS_SET_DISPLAY_OFF); + msleep(25); + + return 0; +} + +static int ws2401_prepare(struct drm_panel *panel) +{ + return ws2401_power_on(to_ws2401(panel)); +} + +static int ws2401_enable(struct drm_panel *panel) +{ + struct ws2401 *ws = to_ws2401(panel); + + ws2401_command(ws, MIPI_DCS_SET_DISPLAY_ON); + + return 0; +} + +/** + * ws2401_get_modes() - return the mode + * @panel: the panel to get the mode for + * @connector: reference to the central DRM connector control structure + */ +static int ws2401_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct ws2401 *ws = to_ws2401(panel); + struct drm_display_mode *mode; + static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; + + /* + * We just support the LMS380KF01 so far, if we implement more panels + * this mode, the following connector display_info settings and + * probably the custom DCS sequences needs to selected based on what + * the target panel needs. + */ + mode = drm_mode_duplicate(connector->dev, &lms380kf01_480_800_mode); + if (!mode) { + dev_err(ws->dev, "failed to add mode\n"); + return -ENOMEM; + } + + connector->display_info.bpc = 8; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + connector->display_info.bus_flags = + DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE; + drm_display_info_set_bus_formats(&connector->display_info, + &bus_format, 1); + + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs ws2401_drm_funcs = { + .disable = ws2401_disable, + .unprepare = ws2401_unprepare, + .prepare = ws2401_prepare, + .enable = ws2401_enable, + .get_modes = ws2401_get_modes, +}; + +static int ws2401_set_brightness(struct backlight_device *bl) +{ + struct ws2401 *ws = bl_get_data(bl); + u8 brightness = bl->props.brightness; + + ws2401_command(ws, WS2401_WRDISBV, brightness); + + return 0; +} + +static const struct backlight_ops ws2401_bl_ops = { + .update_status = ws2401_set_brightness, +}; + +const struct backlight_properties ws2401_bl_props = { + .type = BACKLIGHT_PLATFORM, + .brightness = 120, + .max_brightness = U8_MAX, +}; + +static int ws2401_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct ws2401 *ws; + int ret; + + ws = devm_kzalloc(dev, sizeof(*ws), GFP_KERNEL); + if (!ws) + return -ENOMEM; + ws->dev = dev; + + /* + * VCI is the analog voltage supply + * VCCIO is the digital I/O voltage supply + */ + ws->regulators[0].supply = "vci"; + ws->regulators[1].supply = "vccio"; + ret = devm_regulator_bulk_get(dev, + ARRAY_SIZE(ws->regulators), + ws->regulators); + if (ret) + return dev_err_probe(dev, ret, "failed to get regulators\n"); + + ws->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ws->reset)) { + ret = PTR_ERR(ws->reset); + return dev_err_probe(dev, ret, "no RESET GPIO\n"); + } + + ret = mipi_dbi_spi_init(spi, &ws->dbi, NULL); + if (ret) + return dev_err_probe(dev, ret, "MIPI DBI init failed\n"); + ws->dbi.read_commands = ws2401_dbi_read_commands; + + drm_panel_init(&ws->panel, dev, &ws2401_drm_funcs, + DRM_MODE_CONNECTOR_DPI); + + ret = drm_panel_of_backlight(&ws->panel); + if (ret) { + dev_info(dev, "no external backlight, using internal backlight\n"); + ws->bl = devm_backlight_device_register(dev, "ws2401", dev, ws, + &ws2401_bl_ops, &ws2401_bl_props); + if (IS_ERR(ws->bl)) { + ret = PTR_ERR(ws->bl); + return dev_err_probe(dev, ret, + "failed to register backlight device\n"); + } + ws->panel.backlight = ws->bl; + } else { + dev_info(dev, "using external backlight\n"); + } + + spi_set_drvdata(spi, ws); + + drm_panel_add(&ws->panel); + dev_dbg(dev, "added panel\n"); + + return 0; +} + +static int ws2401_remove(struct spi_device *spi) +{ + struct ws2401 *ws = spi_get_drvdata(spi); + + drm_panel_remove(&ws->panel); + return 0; +} + +/* + * Samsung LMS380KF01 is the one instance of this display controller that we + * know about, but if more are found, the controller can be parameterized + * here and used for other configurations. + */ +static const struct of_device_id ws2401_match[] = { + { .compatible = "samsung,lms380kf01", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ws2401_match); + +static struct spi_driver ws2401_driver = { + .probe = ws2401_probe, + .remove = ws2401_remove, + .driver = { + .name = "ws2401-panel", + .of_match_table = ws2401_match, + }, +}; +module_spi_driver(ws2401_driver); + +MODULE_AUTHOR("Linus Walleij linus.walleij@linaro.org"); +MODULE_DESCRIPTION("Samsung WS2401 panel driver"); +MODULE_LICENSE("GPL v2");