From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Signed-off-by: Srinivasan S srinivasan.s@intel.com --- drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) { - DRM_ERROR("failed to update payload %d\n", ret); + if (!connector || + connector->base.status != connector_status_connected) { + DRM_WARN("DP MST disconnect\n"); + } else { + DRM_ERROR("failed to update payload %d\n", ret); + } } if (old_crtc_state->has_audio) intel_audio_codec_disable(encoder,
On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s@intel.com wrote:
From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Please add this link as Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign off statement
Signed-off-by: Srinivasan S srinivasan.s@intel.com
drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
if (!connector ||connector->base.status != connector_status_connected) {DRM_WARN("DP MST disconnect\n");
May be adding this check before calling drm_dp_update_payload_part1() is a better idea? If the connector is disconnected, why update payload?
Jani, Ville, thoughts?
Regards Manasi
} else {DRM_ERROR("failed to update payload %d\n", ret);}-- 2.7.4
On Wed, Sep 18, 2019 at 10:50:39AM -0700, Manasi Navare wrote:
On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s@intel.com wrote:
From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Please add this link as Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign off statement
Signed-off-by: Srinivasan S srinivasan.s@intel.com
drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
if (!connector ||connector->base.status != connector_status_connected) {DRM_WARN("DP MST disconnect\n");May be adding this check before calling drm_dp_update_payload_part1() is a better idea? If the connector is disconnected, why update payload?
Jani, Ville, thoughts?
Or just convert it to a debug?
Regards Manasi
} else {DRM_ERROR("failed to update payload %d\n", ret);}-- 2.7.4
On Wed, Sep 18, 2019 at 09:11:36PM +0300, Ville Syrjälä wrote:
On Wed, Sep 18, 2019 at 10:50:39AM -0700, Manasi Navare wrote:
On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s@intel.com wrote:
From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Please add this link as Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign off statement
Signed-off-by: Srinivasan S srinivasan.s@intel.com
drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
if (!connector ||connector->base.status != connector_status_connected) {DRM_WARN("DP MST disconnect\n");May be adding this check before calling drm_dp_update_payload_part1() is a better idea? If the connector is disconnected, why update payload?
Jani, Ville, thoughts?
Or just convert it to a debug?
Sure that will work, but do we really want to update the payload if the connector status is disconnected. So shouldnt checking that before calling the function be a better fix?
Manasi
Regards Manasi
} else {DRM_ERROR("failed to update payload %d\n", ret);}-- 2.7.4
-- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Would the following be appropriate fix?
if (connector || connector->base.status == connector_status_connected) { ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) { DRM_ERROR("failed to update payload %d\n", ret); } }
Regards, -----Original Message----- From: dri-devel dri-devel-bounces@lists.freedesktop.org On Behalf Of Manasi Navare Sent: Wednesday, September 18, 2019 11:55 PM To: Ville Syrjälä ville.syrjala@linux.intel.com Cc: S, Srinivasan srinivasan.s@intel.com; intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org Subject: Re: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
On Wed, Sep 18, 2019 at 09:11:36PM +0300, Ville Syrjälä wrote:
On Wed, Sep 18, 2019 at 10:50:39AM -0700, Manasi Navare wrote:
On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s@intel.com wrote:
From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Please add this link as Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign off statement
Signed-off-by: Srinivasan S srinivasan.s@intel.com
drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
if (!connector ||connector->base.status != connector_status_connected) {DRM_WARN("DP MST disconnect\n");May be adding this check before calling drm_dp_update_payload_part1() is a better idea? If the connector is disconnected, why update payload?
Jani, Ville, thoughts?
Or just convert it to a debug?
Sure that will work, but do we really want to update the payload if the connector status is disconnected. So shouldnt checking that before calling the function be a better fix?
Manasi
Regards Manasi
} else {DRM_ERROR("failed to update payload %d\n", ret);}-- 2.7.4
-- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Thu, Sep 19, 2019 at 07:23:30AM +0000, S, Srinivasan wrote:
Would the following be appropriate fix?
if (connector || connector->base.status == connector_status_connected) { ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) { DRM_ERROR("failed to update payload %d\n", ret); } }
The whole connector->status check is racy. IMO don't do it.
Regards, -----Original Message----- From: dri-devel dri-devel-bounces@lists.freedesktop.org On Behalf Of Manasi Navare Sent: Wednesday, September 18, 2019 11:55 PM To: Ville Syrjälä ville.syrjala@linux.intel.com Cc: S, Srinivasan srinivasan.s@intel.com; intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org Subject: Re: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
On Wed, Sep 18, 2019 at 09:11:36PM +0300, Ville Syrjälä wrote:
On Wed, Sep 18, 2019 at 10:50:39AM -0700, Manasi Navare wrote:
On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s@intel.com wrote:
From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Please add this link as Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign off statement
Signed-off-by: Srinivasan S srinivasan.s@intel.com
drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
if (!connector ||connector->base.status != connector_status_connected) {DRM_WARN("DP MST disconnect\n");May be adding this check before calling drm_dp_update_payload_part1() is a better idea? If the connector is disconnected, why update payload?
Jani, Ville, thoughts?
Or just convert it to a debug?
Sure that will work, but do we really want to update the payload if the connector status is disconnected. So shouldnt checking that before calling the function be a better fix?
Manasi
Regards Manasi
} else {DRM_ERROR("failed to update payload %d\n", ret);}-- 2.7.4
-- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Then it's better that, could we change it to DRM_DEBUG_KMS("failed to update payload %d\n", ret); instead of DRM_ERROR("failed to update payload %d\n", ret);, without any connector status check, would that be fine?
Regards, -----Original Message----- From: Ville Syrjälä ville.syrjala@linux.intel.com Sent: Thursday, September 19, 2019 5:34 PM To: S, Srinivasan srinivasan.s@intel.com Cc: Navare, Manasi D manasi.d.navare@intel.com; intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org Subject: Re: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
On Thu, Sep 19, 2019 at 07:23:30AM +0000, S, Srinivasan wrote:
Would the following be appropriate fix?
if (connector || connector->base.status == connector_status_connected) { ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) { DRM_ERROR("failed to update payload %d\n", ret); } }
The whole connector->status check is racy. IMO don't do it.
Regards, -----Original Message----- From: dri-devel dri-devel-bounces@lists.freedesktop.org On Behalf Of Manasi Navare Sent: Wednesday, September 18, 2019 11:55 PM To: Ville Syrjälä ville.syrjala@linux.intel.com Cc: S, Srinivasan srinivasan.s@intel.com; intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org Subject: Re: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
On Wed, Sep 18, 2019 at 09:11:36PM +0300, Ville Syrjälä wrote:
On Wed, Sep 18, 2019 at 10:50:39AM -0700, Manasi Navare wrote:
On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s@intel.com wrote:
From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Please add this link as Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign off statement
Signed-off-by: Srinivasan S srinivasan.s@intel.com
drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
if (!connector ||connector->base.status != connector_status_connected) {DRM_WARN("DP MST disconnect\n");May be adding this check before calling drm_dp_update_payload_part1() is a better idea? If the connector is disconnected, why update payload?
Jani, Ville, thoughts?
Or just convert it to a debug?
Sure that will work, but do we really want to update the payload if the connector status is disconnected. So shouldnt checking that before calling the function be a better fix?
Manasi
Regards Manasi
} else {DRM_ERROR("failed to update payload %d\n", ret);}-- 2.7.4
-- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
-- Ville Syrjälä Intel
Hi Ville,
I have revised the patch from DRM_ERROR to DRM_DEBUG, could you please review?
https://patchwork.freedesktop.org/patch/332806/?series=66837&rev=3
Thanks,
-----Original Message----- From: S, Srinivasan Sent: Thursday, September 19, 2019 7:22 PM To: 'Ville Syrjälä' ville.syrjala@linux.intel.com Cc: Navare, Manasi D manasi.d.navare@intel.com; 'intel-gfx@lists.freedesktop.org' intel-gfx@lists.freedesktop.org; 'dri-devel@lists.freedesktop.org' dri-devel@lists.freedesktop.org Subject: RE: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
Then it's better that, could we change it to DRM_DEBUG_KMS("failed to update payload %d\n", ret); instead of DRM_ERROR("failed to update payload %d\n", ret);, without any connector status check, would that be fine?
Regards, -----Original Message----- From: Ville Syrjälä ville.syrjala@linux.intel.com Sent: Thursday, September 19, 2019 5:34 PM To: S, Srinivasan srinivasan.s@intel.com Cc: Navare, Manasi D manasi.d.navare@intel.com; intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org Subject: Re: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
On Thu, Sep 19, 2019 at 07:23:30AM +0000, S, Srinivasan wrote:
Would the following be appropriate fix?
if (connector || connector->base.status == connector_status_connected) { ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) { DRM_ERROR("failed to update payload %d\n", ret); } }
The whole connector->status check is racy. IMO don't do it.
Regards, -----Original Message----- From: dri-devel dri-devel-bounces@lists.freedesktop.org On Behalf Of Manasi Navare Sent: Wednesday, September 18, 2019 11:55 PM To: Ville Syrjälä ville.syrjala@linux.intel.com Cc: S, Srinivasan srinivasan.s@intel.com; intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org Subject: Re: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
On Wed, Sep 18, 2019 at 09:11:36PM +0300, Ville Syrjälä wrote:
On Wed, Sep 18, 2019 at 10:50:39AM -0700, Manasi Navare wrote:
On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s@intel.com wrote:
From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Please add this link as Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign off statement
Signed-off-by: Srinivasan S srinivasan.s@intel.com
drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
if (!connector ||connector->base.status != connector_status_connected) {DRM_WARN("DP MST disconnect\n");May be adding this check before calling drm_dp_update_payload_part1() is a better idea? If the connector is disconnected, why update payload?
Jani, Ville, thoughts?
Or just convert it to a debug?
Sure that will work, but do we really want to update the payload if the connector status is disconnected. So shouldnt checking that before calling the function be a better fix?
Manasi
Regards Manasi
} else {DRM_ERROR("failed to update payload %d\n", ret);}-- 2.7.4
-- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
-- Ville Syrjälä Intel
Could anyone please review the patch below & let me know if any other ideas please?
https://patchwork.freedesktop.org/patch/332806/?series=66837&rev=3
Thanks,
-----Original Message----- From: S, Srinivasan Sent: Wednesday, September 25, 2019 8:33 PM To: 'Ville Syrjälä' ville.syrjala@linux.intel.com Cc: Navare, Manasi D manasi.d.navare@intel.com; 'intel- gfx@lists.freedesktop.org' intel-gfx@lists.freedesktop.org; 'dri- devel@lists.freedesktop.org' dri-devel@lists.freedesktop.org Subject: RE: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
Hi Ville,
I have revised the patch from DRM_ERROR to DRM_DEBUG, could you please review?
https://patchwork.freedesktop.org/patch/332806/?series=66837&rev=3
Thanks,
-----Original Message----- From: S, Srinivasan Sent: Thursday, September 19, 2019 7:22 PM To: 'Ville Syrjälä' ville.syrjala@linux.intel.com Cc: Navare, Manasi D manasi.d.navare@intel.com; 'intel- gfx@lists.freedesktop.org' intel-gfx@lists.freedesktop.org; 'dri- devel@lists.freedesktop.org' dri-devel@lists.freedesktop.org Subject: RE: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
Then it's better that, could we change it to DRM_DEBUG_KMS("failed to update payload %d\n", ret); instead of DRM_ERROR("failed to update payload %d\n", ret);, without any connector status check, would that be fine?
Regards, -----Original Message----- From: Ville Syrjälä ville.syrjala@linux.intel.com Sent: Thursday, September 19, 2019 5:34 PM To: S, Srinivasan srinivasan.s@intel.com Cc: Navare, Manasi D manasi.d.navare@intel.com; intel- gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org Subject: Re: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
On Thu, Sep 19, 2019 at 07:23:30AM +0000, S, Srinivasan wrote:
Would the following be appropriate fix?
if (connector || connector->base.status == connector_status_connected){
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) { DRM_ERROR("failed to update payload %d\n", ret); } }The whole connector->status check is racy. IMO don't do it.
Regards, -----Original Message----- From: dri-devel dri-devel-bounces@lists.freedesktop.org On Behalf Of Manasi Navare Sent: Wednesday, September 18, 2019 11:55 PM To: Ville Syrjälä ville.syrjala@linux.intel.com Cc: S, Srinivasan srinivasan.s@intel.com; intel-gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org Subject: Re: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable
On Wed, Sep 18, 2019 at 09:11:36PM +0300, Ville Syrjälä wrote:
On Wed, Sep 18, 2019 at 10:50:39AM -0700, Manasi Navare wrote:
On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s@intel.com
wrote:
From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and
throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Please add this link as Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign off statement
Signed-off-by: Srinivasan S srinivasan.s@intel.com
drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
if (!connector ||connector->base.status !=connector_status_connected) {
DRM_WARN("DP MST disconnect\n");May be adding this check before calling drm_dp_update_payload_part1() is
a better idea?
If the connector is disconnected, why update payload?
Jani, Ville, thoughts?
Or just convert it to a debug?
Sure that will work, but do we really want to update the payload if the
connector status is disconnected.
So shouldnt checking that before calling the function be a better fix?
Manasi
Regards Manasi
} else {DRM_ERROR("failed to update payload %d\n",ret);
}-- 2.7.4
-- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
-- Ville Syrjälä Intel
On Wed, 18 Sep 2019, Manasi Navare manasi.d.navare@intel.com wrote:
On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s@intel.com wrote:
From: Srinivasan S srinivasan.s@intel.com
This patch avoids DP MST payload error message in dmesg, as it is trying to read the payload from the disconnected DP MST device. After the unplug the connector status is disconnected and we should not be looking for the payload and hence remove the error and throw the warning.
This details can be found in: https://bugs.freedesktop.org/show_bug.cgi?id=111632
Please add this link as Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign off statement
ITYM *before* Signed-off-by. But yeah, use the Bugzilla: tag, and please use git log to see plenty of examples.
BR, Jani.
Signed-off-by: Srinivasan S srinivasan.s@intel.com
drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index eeeb3f933aa4..5b2278fdf675 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr); if (ret) {
DRM_ERROR("failed to update payload %d\n", ret);
if (!connector ||connector->base.status != connector_status_connected) {DRM_WARN("DP MST disconnect\n");May be adding this check before calling drm_dp_update_payload_part1() is a better idea? If the connector is disconnected, why update payload?
Jani, Ville, thoughts?
Regards Manasi
} else {DRM_ERROR("failed to update payload %d\n", ret);}-- 2.7.4
dri-devel@lists.freedesktop.org
-
Jani Nikula -
Manasi Navare -
S, Srinivasan -
srinivasan.s＠intel.com
-
Ville Syrjälä