[PATCH v3 1/2] dt-bindings: display: bridge: ldb: Implement simple NXP i.MX8MP LDB bridge
The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Add DT binding which represents this serializer as a bridge.
Acked-by: Sam Ravnborg sam@ravnborg.org Signed-off-by: Marek Vasut marex@denx.de Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Lucas Stach l.stach@pengutronix.de Cc: Maxime Ripard maxime@cerno.tech Cc: Peng Fan peng.fan@nxp.com Cc: Rob Herring robh+dt@kernel.org Cc: Robby Cai robby.cai@nxp.com Cc: Robert Foss robert.foss@linaro.org Cc: Sam Ravnborg sam@ravnborg.org Cc: Thomas Zimmermann tzimmermann@suse.de Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org --- V2: - Consistently use fsl,imx8mp-ldb as compatible - Drop items: from compatible: - Replace minItems with maxItems in clocks: - Drop quotes from clock-names const: ldb - Rename syscon to fsl,syscon - Use generic name of ldb-lvds in example V3: - Add AB from Sam - Consistently use MX8MP --- .../bindings/display/bridge/nxp,ldb.yaml | 96 +++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/nxp,ldb.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ldb.yaml new file mode 100644 index 000000000000..9c1807f2ae43 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ldb.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP DPI to LVDS bridge chip + +maintainers: + - Marek Vasut marex@denx.de + +description: | + The i.MX8MP contains two syscon registers which are responsible + for configuring the on-SoC DPI-to-LVDS serializer. This describes + those registers as bridge within the DT. + +properties: + compatible: + const: fsl,imx8mp-ldb + + clocks: + maxItems: 1 + + clock-names: + const: ldb + + fsl,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to media block controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@1 + +required: + - compatible + - clocks + - fsl,syscon + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + + bridge { + compatible = "fsl,imx8mp-ldb"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + fsl,syscon = <&media_blk_ctrl>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + remote-endpoint = <&ldb_to_lvdsx4panel>; + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + };
The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Implement a simple bridge driver for this serializer.
Reviewed-by: Sam Ravnborg sam@ravnborg.org Signed-off-by: Marek Vasut marex@denx.de Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Lucas Stach l.stach@pengutronix.de Cc: Maxime Ripard maxime@cerno.tech Cc: Peng Fan peng.fan@nxp.com Cc: Robby Cai robby.cai@nxp.com Cc: Robert Foss robert.foss@linaro.org Cc: Sam Ravnborg sam@ravnborg.org Cc: Thomas Zimmermann tzimmermann@suse.de To: dri-devel@lists.freedesktop.org -- V2: - Rename syscon to fsl,syscon V3: - Consistently use MX8MP - Add sentinel of_device_table - Add RB from Sam --- drivers/gpu/drm/bridge/Kconfig | 8 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/nxp-ldb.c | 343 +++++++++++++++++++++++++++++++ 3 files changed, 352 insertions(+) create mode 100644 drivers/gpu/drm/bridge/nxp-ldb.c
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 20f9bc7f4be5..3ea2f2745e33 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -185,6 +185,14 @@ config DRM_NWL_MIPI_DSI This enables the Northwest Logic MIPI DSI Host controller as for example found on NXP's i.MX8 Processors.
+config DRM_NXP_LDB + tristate "NXP i.MX8MP LDB bridge" + depends on OF + select DRM_KMS_HELPER + select DRM_PANEL_BRIDGE + help + Support for i.MX8MP DPI-to-LVDS on-SoC encoder. + config DRM_NXP_PTN3460 tristate "NXP PTN3460 DP/LVDS bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index bdffad2a7ed3..f800b2331d9e 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o obj-$(CONFIG_DRM_LONTIUM_LT9611UXC) += lontium-lt9611uxc.o obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o +obj-$(CONFIG_DRM_NXP_LDB) += nxp-ldb.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o diff --git a/drivers/gpu/drm/bridge/nxp-ldb.c b/drivers/gpu/drm/bridge/nxp-ldb.c new file mode 100644 index 000000000000..0c8954e0f329 --- /dev/null +++ b/drivers/gpu/drm/bridge/nxp-ldb.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2022 Marek Vasut marex@denx.de + */ + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> + +#define LDB_CTRL 0x5c +#define LDB_CTRL_CH0_ENABLE BIT(0) +#define LDB_CTRL_CH0_DI_SELECT BIT(1) +#define LDB_CTRL_CH1_ENABLE BIT(2) +#define LDB_CTRL_CH1_DI_SELECT BIT(3) +#define LDB_CTRL_SPLIT_MODE BIT(4) +#define LDB_CTRL_CH0_DATA_WIDTH BIT(5) +#define LDB_CTRL_CH0_BIT_MAPPING BIT(6) +#define LDB_CTRL_CH1_DATA_WIDTH BIT(7) +#define LDB_CTRL_CH1_BIT_MAPPING BIT(8) +#define LDB_CTRL_DI0_VSYNC_POLARITY BIT(9) +#define LDB_CTRL_DI1_VSYNC_POLARITY BIT(10) +#define LDB_CTRL_REG_CH0_FIFO_RESET BIT(11) +#define LDB_CTRL_REG_CH1_FIFO_RESET BIT(12) +#define LDB_CTRL_ASYNC_FIFO_ENABLE BIT(24) +#define LDB_CTRL_ASYNC_FIFO_THRESHOLD_MASK GENMASK(27, 25) + +#define LVDS_CTRL 0x128 +#define LVDS_CTRL_CH0_EN BIT(0) +#define LVDS_CTRL_CH1_EN BIT(1) +#define LVDS_CTRL_VBG_EN BIT(2) +#define LVDS_CTRL_HS_EN BIT(3) +#define LVDS_CTRL_PRE_EMPH_EN BIT(4) +#define LVDS_CTRL_PRE_EMPH_ADJ(n) (((n) & 0x7) << 5) +#define LVDS_CTRL_PRE_EMPH_ADJ_MASK GENMASK(7, 5) +#define LVDS_CTRL_CM_ADJ(n) (((n) & 0x7) << 8) +#define LVDS_CTRL_CM_ADJ_MASK GENMASK(10, 8) +#define LVDS_CTRL_CC_ADJ(n) (((n) & 0x7) << 11) +#define LVDS_CTRL_CC_ADJ_MASK GENMASK(13, 11) +#define LVDS_CTRL_SLEW_ADJ(n) (((n) & 0x7) << 14) +#define LVDS_CTRL_SLEW_ADJ_MASK GENMASK(16, 14) +#define LVDS_CTRL_VBG_ADJ(n) (((n) & 0x7) << 17) +#define LVDS_CTRL_VBG_ADJ_MASK GENMASK(19, 17) + +struct nxp_ldb { + struct device *dev; + struct drm_bridge bridge; + struct drm_bridge *panel_bridge; + struct clk *clk; + struct regmap *regmap; + bool lvds_dual_link; +}; + +static inline struct nxp_ldb *to_nxp_ldb(struct drm_bridge *bridge) +{ + return container_of(bridge, struct nxp_ldb, bridge); +} + +static int nxp_ldb_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct nxp_ldb *nxp_ldb = to_nxp_ldb(bridge); + + return drm_bridge_attach(bridge->encoder, nxp_ldb->panel_bridge, + bridge, flags); +} + +static int nxp_ldb_atomic_check(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + /* Invert DE signal polarity. */ + bridge_state->input_bus_cfg.flags &= ~(DRM_BUS_FLAG_DE_LOW | + DRM_BUS_FLAG_DE_HIGH); + if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_LOW) + bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_HIGH; + else if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_HIGH) + bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_LOW; + + return 0; +} + +static void nxp_ldb_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct nxp_ldb *nxp_ldb = to_nxp_ldb(bridge); + struct drm_atomic_state *state = old_bridge_state->base.state; + const struct drm_bridge_state *bridge_state; + const struct drm_crtc_state *crtc_state; + const struct drm_display_mode *mode; + struct drm_connector *connector; + struct drm_crtc *crtc; + bool lvds_format_24bpp; + bool lvds_format_jeida; + u32 reg; + + /* Get the LVDS format from the bridge state. */ + bridge_state = drm_atomic_get_new_bridge_state(state, bridge); + + switch (bridge_state->output_bus_cfg.format) { + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: + lvds_format_24bpp = false; + lvds_format_jeida = true; + break; + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: + lvds_format_24bpp = true; + lvds_format_jeida = true; + break; + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: + lvds_format_24bpp = true; + lvds_format_jeida = false; + break; + default: + /* + * Some bridges still don't set the correct LVDS bus pixel + * format, use SPWG24 default format until those are fixed. + */ + lvds_format_24bpp = true; + lvds_format_jeida = false; + dev_warn(nxp_ldb->dev, + "Unsupported LVDS bus format 0x%04x, please check output bridge driver. Falling back to SPWG24.\n", + bridge_state->output_bus_cfg.format); + break; + } + + /* + * Retrieve the CRTC adjusted mode. This requires a little dance to go + * from the bridge to the encoder, to the connector and to the CRTC. + */ + connector = drm_atomic_get_new_connector_for_encoder(state, + bridge->encoder); + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); + mode = &crtc_state->adjusted_mode; + + if (nxp_ldb->lvds_dual_link) + clk_set_rate(nxp_ldb->clk, mode->clock * 3500); + else + clk_set_rate(nxp_ldb->clk, mode->clock * 7000); + clk_prepare_enable(nxp_ldb->clk); + + /* Program LDB_CTRL */ + reg = LDB_CTRL_CH0_ENABLE; + + if (nxp_ldb->lvds_dual_link) + reg |= LDB_CTRL_CH1_ENABLE; + + if (lvds_format_24bpp) { + reg |= LDB_CTRL_CH0_DATA_WIDTH; + if (nxp_ldb->lvds_dual_link) + reg |= LDB_CTRL_CH1_DATA_WIDTH; + } + + if (lvds_format_jeida) { + reg |= LDB_CTRL_CH0_BIT_MAPPING; + if (nxp_ldb->lvds_dual_link) + reg |= LDB_CTRL_CH1_BIT_MAPPING; + } + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) { + reg |= LDB_CTRL_DI0_VSYNC_POLARITY; + if (nxp_ldb->lvds_dual_link) + reg |= LDB_CTRL_DI1_VSYNC_POLARITY; + } + + regmap_write(nxp_ldb->regmap, LDB_CTRL, reg); + + /* Program LVDS_CTRL */ + reg = LVDS_CTRL_CC_ADJ(2) | LVDS_CTRL_PRE_EMPH_EN | + LVDS_CTRL_PRE_EMPH_ADJ(3) | LVDS_CTRL_VBG_EN; + regmap_write(nxp_ldb->regmap, LVDS_CTRL, reg); + + /* Wait for VBG to stabilize. */ + usleep_range(15, 20); + + reg |= LVDS_CTRL_CH0_EN; + if (nxp_ldb->lvds_dual_link) + reg |= LVDS_CTRL_CH1_EN; + + regmap_write(nxp_ldb->regmap, LVDS_CTRL, reg); +} + +static void nxp_ldb_atomic_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct nxp_ldb *nxp_ldb = to_nxp_ldb(bridge); + + /* Stop both channels. */ + regmap_write(nxp_ldb->regmap, LVDS_CTRL, 0); + regmap_write(nxp_ldb->regmap, LDB_CTRL, 0); + + clk_disable_unprepare(nxp_ldb->clk); +} + +#define MAX_INPUT_SEL_FORMATS 1 +static u32 * +nxp_ldb_atomic_get_input_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + u32 output_fmt, + unsigned int *num_input_fmts) +{ + u32 *input_fmts; + + *num_input_fmts = 0; + + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), + GFP_KERNEL); + if (!input_fmts) + return NULL; + + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; + *num_input_fmts = MAX_INPUT_SEL_FORMATS; + + return input_fmts; +} + +static enum drm_mode_status +nxp_ldb_mode_valid(struct drm_bridge *bridge, + const struct drm_display_info *info, + const struct drm_display_mode *mode) +{ + struct nxp_ldb *nxp_ldb = to_nxp_ldb(bridge); + + if (mode->clock > (nxp_ldb->lvds_dual_link ? 80000 : 160000)) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static const struct drm_bridge_funcs funcs = { + .attach = nxp_ldb_attach, + .atomic_check = nxp_ldb_atomic_check, + .atomic_enable = nxp_ldb_atomic_enable, + .atomic_disable = nxp_ldb_atomic_disable, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_get_input_bus_fmts = nxp_ldb_atomic_get_input_bus_fmts, + .atomic_reset = drm_atomic_helper_bridge_reset, + .mode_valid = nxp_ldb_mode_valid, +}; + +static int nxp_ldb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *panel_node; + struct device_node *port1, *port2; + struct drm_panel *panel; + struct nxp_ldb *nxp_ldb; + int dual_link; + + nxp_ldb = devm_kzalloc(dev, sizeof(*nxp_ldb), GFP_KERNEL); + if (!nxp_ldb) + return -ENOMEM; + + nxp_ldb->dev = &pdev->dev; + nxp_ldb->bridge.funcs = &funcs; + nxp_ldb->bridge.of_node = dev->of_node; + + nxp_ldb->clk = devm_clk_get(dev, "ldb"); + if (IS_ERR(nxp_ldb->clk)) + return PTR_ERR(nxp_ldb->clk); + + nxp_ldb->regmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "fsl,syscon"); + if (IS_ERR(nxp_ldb->regmap)) + return PTR_ERR(nxp_ldb->regmap); + + /* Locate the panel DT node. */ + panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); + if (!panel_node) + return -ENXIO; + + panel = of_drm_find_panel(panel_node); + of_node_put(panel_node); + if (IS_ERR(panel)) + return PTR_ERR(panel); + + nxp_ldb->panel_bridge = devm_drm_panel_bridge_add(dev, panel); + if (IS_ERR(nxp_ldb->panel_bridge)) + return PTR_ERR(nxp_ldb->panel_bridge); + + /* Determine whether this is dual-link configuration */ + port1 = of_graph_get_port_by_id(dev->of_node, 1); + port2 = of_graph_get_port_by_id(dev->of_node, 2); + dual_link = drm_of_lvds_get_dual_link_pixel_order(port1, port2); + of_node_put(port1); + of_node_put(port2); + + if (dual_link == DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS) { + dev_err(dev, "LVDS channel pixel swap not supported.\n"); + return -EINVAL; + } + + if (dual_link == DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS) + nxp_ldb->lvds_dual_link = true; + + platform_set_drvdata(pdev, nxp_ldb); + + drm_bridge_add(&nxp_ldb->bridge); + + return 0; +} + +static int nxp_ldb_remove(struct platform_device *pdev) +{ + struct nxp_ldb *nxp_ldb = platform_get_drvdata(pdev); + + drm_bridge_remove(&nxp_ldb->bridge); + + return 0; +} + +static const struct of_device_id nxp_ldb_match[] = { + { .compatible = "fsl,imx8mp-ldb", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, nxp_ldb_match); + +static struct platform_driver nxp_ldb_driver = { + .probe = nxp_ldb_probe, + .remove = nxp_ldb_remove, + .driver = { + .name = "nxp-ldb", + .of_match_table = nxp_ldb_match, + }, +}; +module_platform_driver(nxp_ldb_driver); + +MODULE_AUTHOR("Marek Vasut marex@denx.de"); +MODULE_DESCRIPTION("NXP i.MX8M LDB"); +MODULE_LICENSE("GPL");
On Sat, Apr 23, 2022 at 04:16:24AM +0200, Marek Vasut wrote:
The i.MX8MP contains two syscon registers which are responsible for configuring the on-SoC DPI-to-LVDS serializer. Add DT binding which represents this serializer as a bridge.
Acked-by: Sam Ravnborg sam@ravnborg.org Signed-off-by: Marek Vasut marex@denx.de Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Lucas Stach l.stach@pengutronix.de Cc: Maxime Ripard maxime@cerno.tech Cc: Peng Fan peng.fan@nxp.com Cc: Rob Herring robh+dt@kernel.org Cc: Robby Cai robby.cai@nxp.com Cc: Robert Foss robert.foss@linaro.org Cc: Sam Ravnborg sam@ravnborg.org Cc: Thomas Zimmermann tzimmermann@suse.de Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org
V2: - Consistently use fsl,imx8mp-ldb as compatible - Drop items: from compatible: - Replace minItems with maxItems in clocks: - Drop quotes from clock-names const: ldb - Rename syscon to fsl,syscon - Use generic name of ldb-lvds in example V3: - Add AB from Sam - Consistently use MX8MP
.../bindings/display/bridge/nxp,ldb.yaml | 96 +++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/nxp,ldb.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ldb.yaml new file mode 100644 index 000000000000..9c1807f2ae43 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ldb.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: NXP i.MX8MP DPI to LVDS bridge chip
+maintainers:
- Marek Vasut marex@denx.de
+description: |
- The i.MX8MP contains two syscon registers which are responsible
- for configuring the on-SoC DPI-to-LVDS serializer. This describes
- those registers as bridge within the DT.
+properties:
- compatible:
- const: fsl,imx8mp-ldb
- clocks:
- maxItems: 1
- clock-names:
- const: ldb
- fsl,syscon:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: A phandle to media block controller.
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- properties:
port@0:$ref: /schemas/graph.yaml#/properties/portdescription: Video port for DPI input.port@1:$ref: /schemas/graph.yaml#/properties/portdescription: Video port for LVDS Channel-A output (panel or bridge).port@2:$ref: /schemas/graph.yaml#/properties/portdescription: Video port for LVDS Channel-B output (panel or bridge).- required:
- port@0- port@1+required:
- compatible
- clocks
- fsl,syscon
- ports
+additionalProperties: false
+examples:
- |
- #include <dt-bindings/clock/imx8mp-clock.h>
- bridge {
compatible = "fsl,imx8mp-ldb";clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;clock-names = "ldb";fsl,syscon = <&media_blk_ctrl>;
This binding should be a child of &media_blk_ctrl. And then do away with this property.
ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;ldb_from_lcdif2: endpoint {remote-endpoint = <&lcdif2_to_ldb>;};};port@1 {reg = <1>;ldb_lvds_ch0: endpoint {remote-endpoint = <&ldb_to_lvdsx4panel>;};};port@2 {reg = <2>;ldb_lvds_ch1: endpoint {};};};- };
-- 2.35.1
dri-devel@lists.freedesktop.org
-
Marek Vasut -
Rob Herring