For test 4.2.2.5 to pass per the Link CTS Core 1.2 rev1.1 spec, the source device must attempt at least 7 times to read the EDID when it receives an I2C defer. The normal DRM code makes only 7 retries, regardless of whether or not the response is a native defer or an I2C defer. Test 4.2.2.5 fails since there are native defers interspersed with the I2C defers which results in less than 7 EDID read attempts.
The solution is to add the numer of defers to the retry counter when an I2C DEFER is returned such that another read attempt will be made. This situation should normally only occur in compliance testing, however, as a worse case real-world scenario, it would result in 13 attempts ( 6 native defers, 7 I2C defers) for a single transaction to complete. The net result is a slightly slower response to an EDID read that shouldn't significantly impact overall performance.
V2: - Added a check on the number of I2C Defers to limit the number of times that the retries variable will be decremented. This is to address review feedback regarding possible infinite loops from misbehaving sink devices. V3: - Fixed the limit value to 7 instead of 8 to get the correct retry count. - Combined the increment of the defer count into the if-statement V4: - Removed i915 tag from subject as the patch is not i915-specific V5: - Updated the for-loop to add the number of i2c defers to the retry counter such that the correct number of retry attempts will be made
Signed-off-by: Todd Previte tprevite@gmail.com Cc: dri-devel@lists.freedesktop.org --- drivers/gpu/drm/drm_dp_helper.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 71dcbc6..7f0356e 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -432,7 +432,7 @@ static u32 drm_dp_i2c_functionality(struct i2c_adapter *adapter) */ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) { - unsigned int retry; + unsigned int retry, defer_i2c; int ret;
/* @@ -440,7 +440,7 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) * is required to retry at least seven times upon receiving AUX_DEFER * before giving up the AUX transaction. */ - for (retry = 0; retry < 7; retry++) { + for (retry = 0, defer_i2c = 0; retry < (7 + defer_i2c); retry++) { mutex_lock(&aux->hw_mutex); ret = aux->transfer(aux, msg); mutex_unlock(&aux->hw_mutex); @@ -499,7 +499,13 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
case DP_AUX_I2C_REPLY_DEFER: DRM_DEBUG_KMS("I2C defer\n"); + /* DP Compliance Test 4.2.2.5 Requirement: + * Must have at least 7 retries for I2C defers on the + * transaction to pass this test + */ aux->i2c_defer_count++; + if (defer_i2c < 7) + defer_i2c++; usleep_range(400, 500); continue;
2015-04-15 12:38 GMT-03:00 Todd Previte tprevite@gmail.com:
For test 4.2.2.5 to pass per the Link CTS Core 1.2 rev1.1 spec, the source device must attempt at least 7 times to read the EDID when it receives an I2C defer. The normal DRM code makes only 7 retries, regardless of whether or not the response is a native defer or an I2C defer. Test 4.2.2.5 fails since there are native defers interspersed with the I2C defers which results in less than 7 EDID read attempts.
The solution is to add the numer of defers to the retry counter when an I2C DEFER is returned such that another read attempt will be made. This situation should normally only occur in compliance testing, however, as a worse case real-world scenario, it would result in 13 attempts ( 6 native defers, 7 I2C defers) for a single transaction to complete. The net result is a slightly slower response to an EDID read that shouldn't significantly impact overall performance.
V2:
- Added a check on the number of I2C Defers to limit the number of times that the retries variable will be decremented. This is to address review feedback regarding possible infinite loops from misbehaving sink devices.
V3:
- Fixed the limit value to 7 instead of 8 to get the correct retry count.
- Combined the increment of the defer count into the if-statement
V4:
- Removed i915 tag from subject as the patch is not i915-specific
V5:
- Updated the for-loop to add the number of i2c defers to the retry counter such that the correct number of retry attempts will be made
Signed-off-by: Todd Previte tprevite@gmail.com Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Paulo Zanoni paulo.r.zanoni@intel.com (although just counting to 14 probably wouldn't hurt and would make things simpler)
drivers/gpu/drm/drm_dp_helper.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 71dcbc6..7f0356e 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -432,7 +432,7 @@ static u32 drm_dp_i2c_functionality(struct i2c_adapter *adapter) */ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) {
unsigned int retry;
unsigned int retry, defer_i2c; int ret; /*@@ -440,7 +440,7 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) * is required to retry at least seven times upon receiving AUX_DEFER * before giving up the AUX transaction. */
for (retry = 0; retry < 7; retry++) {
for (retry = 0, defer_i2c = 0; retry < (7 + defer_i2c); retry++) { mutex_lock(&aux->hw_mutex); ret = aux->transfer(aux, msg); mutex_unlock(&aux->hw_mutex);@@ -499,7 +499,13 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
case DP_AUX_I2C_REPLY_DEFER: DRM_DEBUG_KMS("I2C defer\n");
/* DP Compliance Test 4.2.2.5 Requirement:* Must have at least 7 retries for I2C defers on the* transaction to pass this test*/ aux->i2c_defer_count++;if (defer_i2c < 7)defer_i2c++; usleep_range(400, 500); continue;-- 1.9.1
dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel@lists.freedesktop.org
-
Paulo Zanoni -
Todd Previte