Hello drm-misc and drm-intel maintainers,
My "Add support for out-of-band hotplug notification" patchset: https://patchwork.freedesktop.org/series/93763/
Is ready for merging now, as discussed on IRC I based this series on top drm-tip and when trying to apply the i915 parts on top of drm-misc this fails due to conflict.
So as Jani suggested here is a pull-req for a topic-branch with the entire set, minus the troublesome i915 bits. Once this has been merged into both drm-misc-next and drm-intel-next I can push the 2 i915 patch do drm-intel-next on top of the merge.
Note there are also 2 drivers/usb/typec patches in here these have Greg KH's Reviewed-by for merging through the drm tree, Since this USB code does not change all that much. I also checked and the drm-misc-next-2021-08-12 base of this tree contains the same last commit to the modified file as usb-next.
Daniel Vetter mentioned on IRC that it might be better for you to simply pick-up the series directly from patchwork, that is fine too in that case don't forget to add:
Reviewed-by: Lyude Paul lyude@redhat.com
To the entire series (given in a reply to the cover-letter)
And:
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
To the usb/typec patches (patch 7/8), this was given in reply to a previous posting of the series and I forgot to add this in the resend.
Regards,
Hans
The following changes since commit c7782443a88926a4f938f0193041616328cf2db2:
drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors (2021-08-12 09:56:09 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux.git drm-misc-intel-oob-hotplug-v1
for you to fetch changes up to 7f811394878535ed9a6849717de8c2959ae38899:
usb: typec: altmodes/displayport: Notify drm subsys of hotplug events (2021-08-20 12:35:59 +0200)
---------------------------------------------------------------- Topic branch for drm-misc / drm-intel for OOB hotplug support for Type-C connectors
---------------------------------------------------------------- Hans de Goede (6): drm/connector: Give connector sysfs devices there own device_type drm/connector: Add a fwnode pointer to drm_connector and register with ACPI (v2) drm/connector: Add drm_connector_find_by_fwnode() function (v3) drm/connector: Add support for out-of-band hotplug notification (v3) usb: typec: altmodes/displayport: Make dp_altmode_notify() more generic usb: typec: altmodes/displayport: Notify drm subsys of hotplug events
drivers/gpu/drm/drm_connector.c | 79 +++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 2 + drivers/gpu/drm/drm_sysfs.c | 87 +++++++++++++++++++++++++++----- drivers/usb/typec/altmodes/Kconfig | 1 + drivers/usb/typec/altmodes/displayport.c | 58 +++++++++++++-------- include/drm/drm_connector.h | 25 +++++++++ 6 files changed, 217 insertions(+), 35 deletions(-)
On Fri, 20 Aug 2021, Hans de Goede hdegoede@redhat.com wrote:
Hello drm-misc and drm-intel maintainers,
My "Add support for out-of-band hotplug notification" patchset: https://patchwork.freedesktop.org/series/93763/
Is ready for merging now, as discussed on IRC I based this series on top drm-tip and when trying to apply the i915 parts on top of drm-misc this fails due to conflict.
So as Jani suggested here is a pull-req for a topic-branch with the entire set, minus the troublesome i915 bits. Once this has been merged into both drm-misc-next and drm-intel-next I can push the 2 i915 patch do drm-intel-next on top of the merge.
Note there are also 2 drivers/usb/typec patches in here these have Greg KH's Reviewed-by for merging through the drm tree, Since this USB code does not change all that much. I also checked and the drm-misc-next-2021-08-12 base of this tree contains the same last commit to the modified file as usb-next.
Daniel Vetter mentioned on IRC that it might be better for you to simply pick-up the series directly from patchwork, that is fine too in that case don't forget to add:
Reviewed-by: Lyude Paul lyude@redhat.com
To the entire series (given in a reply to the cover-letter)
And:
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
To the usb/typec patches (patch 7/8), this was given in reply to a previous posting of the series and I forgot to add this in the resend.
Since this is mostly touching drm core, I think it should be merged to drm-misc-next first, and drm-intel-next after. Please let us know.
BR, Jani.
Regards,
Hans
The following changes since commit c7782443a88926a4f938f0193041616328cf2db2:
drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors (2021-08-12 09:56:09 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux.git drm-misc-intel-oob-hotplug-v1
for you to fetch changes up to 7f811394878535ed9a6849717de8c2959ae38899:
usb: typec: altmodes/displayport: Notify drm subsys of hotplug events (2021-08-20 12:35:59 +0200)
Topic branch for drm-misc / drm-intel for OOB hotplug support for Type-C connectors
Hans de Goede (6): drm/connector: Give connector sysfs devices there own device_type drm/connector: Add a fwnode pointer to drm_connector and register with ACPI (v2) drm/connector: Add drm_connector_find_by_fwnode() function (v3) drm/connector: Add support for out-of-band hotplug notification (v3) usb: typec: altmodes/displayport: Make dp_altmode_notify() more generic usb: typec: altmodes/displayport: Notify drm subsys of hotplug events
drivers/gpu/drm/drm_connector.c | 79 +++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 2 + drivers/gpu/drm/drm_sysfs.c | 87 +++++++++++++++++++++++++++----- drivers/usb/typec/altmodes/Kconfig | 1 + drivers/usb/typec/altmodes/displayport.c | 58 +++++++++++++-------- include/drm/drm_connector.h | 25 +++++++++ 6 files changed, 217 insertions(+), 35 deletions(-)
Hi,
On 8/24/21 10:45 AM, Jani Nikula wrote:
On Fri, 20 Aug 2021, Hans de Goede hdegoede@redhat.com wrote:
Hello drm-misc and drm-intel maintainers,
My "Add support for out-of-band hotplug notification" patchset: https://patchwork.freedesktop.org/series/93763/
Is ready for merging now, as discussed on IRC I based this series on top drm-tip and when trying to apply the i915 parts on top of drm-misc this fails due to conflict.
So as Jani suggested here is a pull-req for a topic-branch with the entire set, minus the troublesome i915 bits. Once this has been merged into both drm-misc-next and drm-intel-next I can push the 2 i915 patch do drm-intel-next on top of the merge.
Note there are also 2 drivers/usb/typec patches in here these have Greg KH's Reviewed-by for merging through the drm tree, Since this USB code does not change all that much. I also checked and the drm-misc-next-2021-08-12 base of this tree contains the same last commit to the modified file as usb-next.
Daniel Vetter mentioned on IRC that it might be better for you to simply pick-up the series directly from patchwork, that is fine too in that case don't forget to add:
Reviewed-by: Lyude Paul lyude@redhat.com
To the entire series (given in a reply to the cover-letter)
And:
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
To the usb/typec patches (patch 7/8), this was given in reply to a previous posting of the series and I forgot to add this in the resend.
Since this is mostly touching drm core, I think it should be merged to drm-misc-next first, and drm-intel-next after. Please let us know.
I agree this should go to drm-misc-next first.
(I was planning on pushing this to drm-misc-next myself, but then ended up going with the topic branch because of the conflict in the i915 bits.)
Regards,
Hans
The following changes since commit c7782443a88926a4f938f0193041616328cf2db2:
drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors (2021-08-12 09:56:09 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux.git drm-misc-intel-oob-hotplug-v1
for you to fetch changes up to 7f811394878535ed9a6849717de8c2959ae38899:
usb: typec: altmodes/displayport: Notify drm subsys of hotplug events (2021-08-20 12:35:59 +0200)
Topic branch for drm-misc / drm-intel for OOB hotplug support for Type-C connectors
Hans de Goede (6): drm/connector: Give connector sysfs devices there own device_type drm/connector: Add a fwnode pointer to drm_connector and register with ACPI (v2) drm/connector: Add drm_connector_find_by_fwnode() function (v3) drm/connector: Add support for out-of-band hotplug notification (v3) usb: typec: altmodes/displayport: Make dp_altmode_notify() more generic usb: typec: altmodes/displayport: Notify drm subsys of hotplug events
drivers/gpu/drm/drm_connector.c | 79 +++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 2 + drivers/gpu/drm/drm_sysfs.c | 87 +++++++++++++++++++++++++++----- drivers/usb/typec/altmodes/Kconfig | 1 + drivers/usb/typec/altmodes/displayport.c | 58 +++++++++++++-------- include/drm/drm_connector.h | 25 +++++++++ 6 files changed, 217 insertions(+), 35 deletions(-)
On Tue, 2021-08-24 at 18:48 +0200, Hans de Goede wrote:
Hi,
On 8/24/21 10:45 AM, Jani Nikula wrote:
On Fri, 20 Aug 2021, Hans de Goede hdegoede@redhat.com wrote:
Hello drm-misc and drm-intel maintainers,
My "Add support for out-of-band hotplug notification" patchset: https://patchwork.freedesktop.org/series/93763/
Is ready for merging now, as discussed on IRC I based this series on top drm-tip and when trying to apply the i915 parts on top of drm-misc this fails due to conflict.
So as Jani suggested here is a pull-req for a topic-branch with the entire set, minus the troublesome i915 bits. Once this has been merged into both drm-misc-next and drm-intel-next I can push the 2 i915 patch do drm-intel-next on top of the merge.
Note there are also 2 drivers/usb/typec patches in here these have Greg KH's Reviewed-by for merging through the drm tree, Since this USB code does not change all that much. I also checked and the drm-misc-next-2021-08-12 base of this tree contains the same last commit to the modified file as usb-next.
Daniel Vetter mentioned on IRC that it might be better for you to simply pick-up the series directly from patchwork, that is fine too in that case don't forget to add:
Reviewed-by: Lyude Paul lyude@redhat.com
To the entire series (given in a reply to the cover-letter)
And:
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
To the usb/typec patches (patch 7/8), this was given in reply to a previous posting of the series and I forgot to add this in the resend.
Since this is mostly touching drm core, I think it should be merged to drm-misc-next first, and drm-intel-next after. Please let us know.
I agree this should go to drm-misc-next first.
(I was planning on pushing this to drm-misc-next myself, but then ended up going with the topic branch because of the conflict in the i915 bits.)
Just to be clear and avoid confusion: This pull request does apply cleanly on drm-misc-next nd drm-intel-next right now.
I'm just waiting for drm-misc-next maintainers to pull this to drm- misc-next so I can pull it to drm-intel-next.
Maxime, is that your round now? or Thomas?
Thanks, Rodrigo.
Regards,
Hans
The following changes since commit c7782443a88926a4f938f0193041616328cf2db2:
drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors (2021-08-12 09:56:09 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux.git drm-misc-intel-oob-hotplug-v1
for you to fetch changes up to 7f811394878535ed9a6849717de8c2959ae38899:
usb: typec: altmodes/displayport: Notify drm subsys of hotplug events (2021-08-20 12:35:59 +0200)
Topic branch for drm-misc / drm-intel for OOB hotplug support for Type-C connectors
Hans de Goede (6): drm/connector: Give connector sysfs devices there own device_type drm/connector: Add a fwnode pointer to drm_connector and register with ACPI (v2) drm/connector: Add drm_connector_find_by_fwnode() function (v3) drm/connector: Add support for out-of-band hotplug notification (v3) usb: typec: altmodes/displayport: Make dp_altmode_notify() more generic usb: typec: altmodes/displayport: Notify drm subsys of hotplug events
drivers/gpu/drm/drm_connector.c | 79 +++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc_internal.h | 2 + drivers/gpu/drm/drm_sysfs.c | 87 +++++++++++++++++++++++++++----- drivers/usb/typec/altmodes/Kconfig | 1 + drivers/usb/typec/altmodes/displayport.c | 58 +++++++++++++-----
include/drm/drm_connector.h | 25 +++++++++ 6 files changed, 217 insertions(+), 35 deletions(-)
On Wed, Aug 25, 2021 at 04:03:43PM +0000, Vivi, Rodrigo wrote:
On Tue, 2021-08-24 at 18:48 +0200, Hans de Goede wrote:
Hi,
On 8/24/21 10:45 AM, Jani Nikula wrote:
On Fri, 20 Aug 2021, Hans de Goede hdegoede@redhat.com wrote:
Hello drm-misc and drm-intel maintainers,
My "Add support for out-of-band hotplug notification" patchset: https://patchwork.freedesktop.org/series/93763/
Is ready for merging now, as discussed on IRC I based this series on top drm-tip and when trying to apply the i915 parts on top of drm-misc this fails due to conflict.
So as Jani suggested here is a pull-req for a topic-branch with the entire set, minus the troublesome i915 bits. Once this has been merged into both drm-misc-next and drm-intel-next I can push the 2 i915 patch do drm-intel-next on top of the merge.
Note there are also 2 drivers/usb/typec patches in here these have Greg KH's Reviewed-by for merging through the drm tree, Since this USB code does not change all that much. I also checked and the drm-misc-next-2021-08-12 base of this tree contains the same last commit to the modified file as usb-next.
Daniel Vetter mentioned on IRC that it might be better for you to simply pick-up the series directly from patchwork, that is fine too in that case don't forget to add:
Reviewed-by: Lyude Paul lyude@redhat.com
To the entire series (given in a reply to the cover-letter)
And:
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
To the usb/typec patches (patch 7/8), this was given in reply to a previous posting of the series and I forgot to add this in the resend.
Since this is mostly touching drm core, I think it should be merged to drm-misc-next first, and drm-intel-next after. Please let us know.
I agree this should go to drm-misc-next first.
(I was planning on pushing this to drm-misc-next myself, but then ended up going with the topic branch because of the conflict in the i915 bits.)
Just to be clear and avoid confusion: This pull request does apply cleanly on drm-misc-next nd drm-intel-next right now.
I'm just waiting for drm-misc-next maintainers to pull this to drm- misc-next so I can pull it to drm-intel-next.
Maxime, is that your round now? or Thomas?
That's me, I just pushed it to drm-misc-next
Thanks! Maxime
On Thu, 2021-08-26 at 10:23 +0200, Maxime Ripard wrote:
On Wed, Aug 25, 2021 at 04:03:43PM +0000, Vivi, Rodrigo wrote:
On Tue, 2021-08-24 at 18:48 +0200, Hans de Goede wrote:
Hi,
On 8/24/21 10:45 AM, Jani Nikula wrote:
On Fri, 20 Aug 2021, Hans de Goede hdegoede@redhat.com wrote:
Hello drm-misc and drm-intel maintainers,
My "Add support for out-of-band hotplug notification" patchset: https://patchwork.freedesktop.org/series/93763/
Is ready for merging now, as discussed on IRC I based this series on top drm-tip and when trying to apply the i915 parts on top of drm-misc this fails due to conflict.
So as Jani suggested here is a pull-req for a topic-branch with the entire set, minus the troublesome i915 bits. Once this has been merged into both drm-misc-next and drm-intel-next I can push the 2 i915 patch do drm-intel-next on top of the merge.
Note there are also 2 drivers/usb/typec patches in here these have Greg KH's Reviewed-by for merging through the drm tree, Since this USB code does not change all that much. I also checked and the drm-misc-next-2021-08-12 base of this tree contains the same last commit to the modified file as usb-next.
Daniel Vetter mentioned on IRC that it might be better for you to simply pick-up the series directly from patchwork, that is fine too in that case don't forget to add:
Reviewed-by: Lyude Paul lyude@redhat.com
To the entire series (given in a reply to the cover-letter)
And:
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
To the usb/typec patches (patch 7/8), this was given in reply to a previous posting of the series and I forgot to add this in the resend.
Since this is mostly touching drm core, I think it should be merged to drm-misc-next first, and drm-intel-next after. Please let us know.
I agree this should go to drm-misc-next first.
(I was planning on pushing this to drm-misc-next myself, but then ended up going with the topic branch because of the conflict in the i915 bits.)
Just to be clear and avoid confusion: This pull request does apply cleanly on drm-misc-next nd drm-intel-next right now.
I'm just waiting for drm-misc-next maintainers to pull this to drm- misc-next so I can pull it to drm-intel-next.
Maxime, is that your round now? or Thomas?
That's me, I just pushed it to drm-misc-next
Thank you! I also pushed to drm-intel-next.
Thanks! Maxime
Hi,
On 8/26/21 1:43 PM, Vivi, Rodrigo wrote:
On Thu, 2021-08-26 at 10:23 +0200, Maxime Ripard wrote:
On Wed, Aug 25, 2021 at 04:03:43PM +0000, Vivi, Rodrigo wrote:
On Tue, 2021-08-24 at 18:48 +0200, Hans de Goede wrote:
Hi,
On 8/24/21 10:45 AM, Jani Nikula wrote:
On Fri, 20 Aug 2021, Hans de Goede hdegoede@redhat.com wrote:
Hello drm-misc and drm-intel maintainers,
My "Add support for out-of-band hotplug notification" patchset: https://patchwork.freedesktop.org/series/93763/
Is ready for merging now, as discussed on IRC I based this series on top drm-tip and when trying to apply the i915 parts on top of drm-misc this fails due to conflict.
So as Jani suggested here is a pull-req for a topic-branch with the entire set, minus the troublesome i915 bits. Once this has been merged into both drm-misc-next and drm-intel-next I can push the 2 i915 patch do drm-intel-next on top of the merge.
Note there are also 2 drivers/usb/typec patches in here these have Greg KH's Reviewed-by for merging through the drm tree, Since this USB code does not change all that much. I also checked and the drm-misc-next-2021-08-12 base of this tree contains the same last commit to the modified file as usb-next.
Daniel Vetter mentioned on IRC that it might be better for you to simply pick-up the series directly from patchwork, that is fine too in that case don't forget to add:
Reviewed-by: Lyude Paul lyude@redhat.com
To the entire series (given in a reply to the cover-letter)
And:
Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
To the usb/typec patches (patch 7/8), this was given in reply to a previous posting of the series and I forgot to add this in the resend.
Since this is mostly touching drm core, I think it should be merged to drm-misc-next first, and drm-intel-next after. Please let us know.
I agree this should go to drm-misc-next first.
(I was planning on pushing this to drm-misc-next myself, but then ended up going with the topic branch because of the conflict in the i915 bits.)
Just to be clear and avoid confusion: This pull request does apply cleanly on drm-misc-next nd drm-intel-next right now.
I'm just waiting for drm-misc-next maintainers to pull this to drm- misc-next so I can pull it to drm-intel-next.
Maxime, is that your round now? or Thomas?
That's me, I just pushed it to drm-misc-next
Thank you! I also pushed to drm-intel-next.
Thanks, I pushed the remaining 2 i915 patches depending on this to drm-intel-next last week (but I forgot to reply to this email then).
Regards,
Hans
dri-devel@lists.freedesktop.org
-
Hans de Goede -
Jani Nikula -
Maxime Ripard -
Vivi, Rodrigo