Hi,

+Sam Ravnborg

I think this patch is ready to get pulled into the drm-misc tree.

On Thu, 17 Dec 2020 at 15:09, Robert Foss robert.foss@linaro.org wrote:

4k requires two dsi pipes, so don't report MODE_OK when only a single pipe is configured. But rather report MODE_PANEL to signal that requirements of the panel are not being met.

Reported-by: Peter Collingbourne pcc@google.com Suggested-by: Peter Collingbourne pcc@google.com Signed-off-by: Robert Foss robert.foss@linaro.org Tested-by: John Stultz john.stultz@linaro.org Tested-by: Anibal Limon anibal.limon@linaro.org Acked-By: Vinod Koul vkoul@kernel.org Tested-by: Peter Collingbourne pcc@google.com Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org

---

drivers/gpu/drm/bridge/lontium-lt9611.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c index d734d9402c35..e8eb8deb444b 100644 --- a/drivers/gpu/drm/bridge/lontium-lt9611.c +++ b/drivers/gpu/drm/bridge/lontium-lt9611.c @@ -867,8 +867,14 @@ static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge, const struct drm_display_mode *mode) { struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode);

•   struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
  
  

•   return lt9611_mode ? MODE_OK : MODE_BAD;
  

•   if (!lt9611_mode)
  

•           return MODE_BAD;
  

•   else if (lt9611_mode->intfs > 1 && !lt9611->dsi1)
  

•           return MODE_PANEL;
  

•   else
  

•           return MODE_OK;
  

}

static void lt9611_bridge_pre_enable(struct drm_bridge *bridge)

2.27.0