As the binding matches panel-simple-dsi, added the compatible to the panel-simple-dsi list. With this change enable-gpios is now optional.

v2: - It is a DSI panel, add it to panel-simple-dsi (Rob)

Signed-off-by: Sam Ravnborg sam@ravnborg.org Cc: Rob Herring robh@kernel.org Cc: Chris Zhong zyw@rock-chips.com Cc: Thierry Reding thierry.reding@gmail.com Cc: Sam Ravnborg sam@ravnborg.org --- .../display/panel/innolux,p079zca.txt | 22 ------------------- .../display/panel/panel-simple-dsi.yaml | 2 ++ 2 files changed, 2 insertions(+), 22 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt deleted file mode 100644 index 3ab8c7412cf6..000000000000 --- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt +++ /dev/null @@ -1,22 +0,0 @@ -Innolux P079ZCA 7.85" 768x1024 TFT LCD panel - -Required properties: -- compatible: should be "innolux,p079zca" -- reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage -- enable-gpios: panel enable gpio - -Optional properties: -- backlight: phandle of the backlight device attached to the panel - -Example: - - &mipi_dsi { - panel@0 { - compatible = "innolux,p079zca"; - reg = <0>; - power-supply = <...>; - backlight = <&backlight>; - enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 16778ce782fc..c0dd9fa29f1d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -33,6 +33,8 @@ properties: - auo,b080uan01 # Boe Corporation 8.0" WUXGA TFT LCD panel - boe,tv080wum-nl0 + # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel + - innolux,p079zca # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel - kingdisplay,kd097d04 # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel

v2: - Add missing types (Rob) - Fix example to specify panel@0 (Rob)

Signed-off-by: Sam Ravnborg sam@ravnborg.org Cc: Rob Herring robh@kernel.org Cc: Andrzej Hajda a.hajda@samsung.com Cc: Thierry Reding thierry.reding@gmail.com Cc: Sam Ravnborg sam@ravnborg.org --- .../display/panel/samsung,s6e8aa0.txt | 56 ---------- .../display/panel/samsung,s6e8aa0.yaml | 100 ++++++++++++++++++ 2 files changed, 100 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt deleted file mode 100644 index 9e766c5f86da..000000000000 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt +++ /dev/null @@ -1,56 +0,0 @@ -Samsung S6E8AA0 AMOLED LCD 5.3 inch panel - -Required properties: - - compatible: "samsung,s6e8aa0" - - reg: the virtual channel number of a DSI peripheral - - vdd3-supply: core voltage supply - - vci-supply: voltage supply for analog circuits - - reset-gpios: a GPIO spec for the reset pin - - display-timings: timings for the connected panel as described by [1] - -Optional properties: - - power-on-delay: delay after turning regulators on [ms] - - reset-delay: delay after reset sequence [ms] - - init-delay: delay after initialization sequence [ms] - - panel-width-mm: physical panel width [mm] - - panel-height-mm: physical panel height [mm] - - flip-horizontal: boolean to flip image horizontally - - flip-vertical: boolean to flip image vertically - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [2]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - panel { - compatible = "samsung,s6e8aa0"; - reg = <0>; - vdd3-supply = <&vcclcd_reg>; - vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - panel-width-mm = <58>; - panel-height-mm = <103>; - flip-horizontal; - flip-vertical; - - display-timings { - timing0: timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml new file mode 100644 index 000000000000..f155074726d2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel + +maintainers: + - Andrzej Hajda a.hajda@samsung.com + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: samsung,s6e8aa0 + + reg: true + reset-gpios: true + display-timings: true + + vdd3-supply: + description: core voltage supply + + vci-supply: + description: voltage supply for analog circuits + + power-on-delay: + description: delay after turning regulators on [ms] + $ref: /schemas/types.yaml#/definitions/uint32 + + reset-delay: + description: delay after reset sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 + + init-delay: + description: delay after initialization sequence [ms] + + panel-width-mm: + description: physical panel width [mm] + + panel-height-mm: + description: physical panel height [mm] + + flip-horizontal: + description: boolean to flip image horizontally + type: boolean + + flip-vertical: + description: boolean to flip image vertically + type: boolean + +required: + - compatible + - reg + - vdd3-supply + - vci-supply + - reset-gpios + - display-timings + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + panel-width-mm = <58>; + panel-height-mm = <103>; + flip-horizontal; + flip-vertical; + + display-timings { + timing0: timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; + }; + +...

This binding describes a panel with a secondary channel.

v3: - Add reg property and unit-address to dsi nodes (Rob)

v2: - add check for required properties if link2 is present (Rob)

Signed-off-by: Sam Ravnborg sam@ravnborg.org Reviewed-by: Rob Herring robh@kernel.org Cc: Rob Herring robh@kernel.org Cc: Thierry Reding thierry.reding@gmail.com Cc: Sam Ravnborg sam@ravnborg.org --- .../display/panel/sharp,lq101r1sx01.txt | 49 ----------- .../display/panel/sharp,lq101r1sx01.yaml | 87 +++++++++++++++++++ 2 files changed, 87 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt deleted file mode 100644 index f522bb8e47e1..000000000000 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt +++ /dev/null @@ -1,49 +0,0 @@ -Sharp Microelectronics 10.1" WQXGA TFT LCD panel - -This panel requires a dual-channel DSI host to operate. It supports two modes: -- left-right: each channel drives the left or right half of the screen -- even-odd: each channel drives the even or odd lines of the screen - -Each of the DSI channels controls a separate DSI peripheral. The peripheral -driven by the first link (DSI-LINK1), left or even, is considered the primary -peripheral and controls the device. The 'link2' property contains a phandle -to the peripheral driven by the second link (DSI-LINK2, right or odd). - -Note that in video mode the DSI-LINK1 interface always provides the left/even -pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it -is possible to program either link to drive the left/even or right/odd pixels -but for the sake of consistency this binding assumes that the same assignment -is chosen as for video mode. - -Required properties: -- compatible: should be "sharp,lq101r1sx01" -- reg: DSI virtual channel of the peripheral - -Required properties (for DSI-LINK1 only): -- link2: phandle to the DSI peripheral on the secondary link. Note that the - presence of this property marks the containing node as DSI-LINK1. -- power-supply: phandle of the regulator that provides the supply voltage - -Optional properties (for DSI-LINK1 only): -- backlight: phandle of the backlight device attached to the panel - -Example: - - dsi@54300000 { - panel: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - - link2 = <&secondary>; - - power-supply = <...>; - backlight = <...>; - }; - }; - - dsi@54400000 { - secondary: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml new file mode 100644 index 000000000000..a679d3647dbd --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq101r1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel + +maintainers: + - Thierry Reding treding@nvidia.com + +description: | + This panel requires a dual-channel DSI host to operate. It supports two modes: + - left-right: each channel drives the left or right half of the screen + - even-odd: each channel drives the even or odd lines of the screen + + Each of the DSI channels controls a separate DSI peripheral. The peripheral + driven by the first link (DSI-LINK1), left or even, is considered the primary + peripheral and controls the device. The 'link2' property contains a phandle + to the peripheral driven by the second link (DSI-LINK2, right or odd). + + Note that in video mode the DSI-LINK1 interface always provides the left/even + pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it + is possible to program either link to drive the left/even or right/odd pixels + but for the sake of consistency this binding assumes that the same assignment + is chosen as for video mode. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sharp,lq101r1sx01 + + reg: true + power-supply: true + backlight: true + + link2: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to the DSI peripheral on the secondary link. Note that the + presence of this property marks the containing node as DSI-LINK1 + +required: + - compatible + - reg + +if: + required: + - link2 +then: + required: + - power-supply + +additionalProperties: false + +examples: + - | + dsi0: dsi@fd922800 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfd922800 0x200>; + + panel: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + + link2 = <&secondary>; + + power-supply = <&power>; + backlight = <&backlight>; + }; + }; + + dsi1: dsi@fd922a00 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfd922a00 0x200>; + + secondary: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + }; + }; + +...