From: Leo Ruan tingquan.ruan@cn.bosch.com
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%.
Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
Signed-off-by: Leo Ruan tingquan.ruan@cn.bosch.com Signed-off-by: Mark Jonas mark.jonas@de.bosch.com --- drivers/gpu/ipu-v3/ipu-di.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c index b4a31d506fcc..74eca68891ad 100644 --- a/drivers/gpu/ipu-v3/ipu-di.c +++ b/drivers/gpu/ipu-v3/ipu-di.c @@ -451,8 +451,9 @@ static void ipu_di_config_clock(struct ipu_di *di,
error = rate / (sig->mode.pixelclock / 1000);
- dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n", - rate, div, (signed)(error - 1000) / 10, error % 10); + dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %c%d.%d%%\n", + rate, div, error < 1000 ? '-' : '+', + abs(error - 1000) / 10, abs(error - 1000) % 10);
/* Allow a 1% error */ if (error < 1010 && error >= 990) {
Hi,
From: Leo Ruan tingquan.ruan@cn.bosch.com
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%.
Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
Signed-off-by: Leo Ruan tingquan.ruan@cn.bosch.com Signed-off-by: Mark Jonas mark.jonas@de.bosch.com
drivers/gpu/ipu-v3/ipu-di.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c index b4a31d506fcc..74eca68891ad 100644 --- a/drivers/gpu/ipu-v3/ipu-di.c +++ b/drivers/gpu/ipu-v3/ipu-di.c @@ -451,8 +451,9 @@ static void ipu_di_config_clock(struct ipu_di *di,
error = rate / (sig->mode.pixelclock / 1000);
dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider%u, error %d.%u%%\n",
rate, div, (signed)(error - 1000) / 10, error % 10);
dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider%u, error %c%d.%d%%\n",
rate, div, error < 1000 ? '-' : '+',abs(error - 1000) / 10, abs(error - 1000) % 10);/* Allow a 1% error */ if (error < 1010 && error >= 990) {
Is there anything I can do to help getting this patch mainline?
Cheers, Mark
Mark Jonas
Building Technologies, Panel Software Fire (BT-FIR/ENG1-Grb) Bosch Sicherheitssysteme GmbH | Postfach 11 11 | 85626 Grasbrunn | GERMANY | www.boschsecurity.com
Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart HRB 23118 Aufsichtsratsvorsitzender: Christian Fischer; Geschäftsführung: Thomas Quante, Peter Löffler, Henrik Siegle
Am Montag, dem 14.02.2022 um 16:44 +0000 schrieb Jonas Mark (BT-FIR/ENG1-Grb):
Hi,
From: Leo Ruan tingquan.ruan@cn.bosch.com
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%.
Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
Signed-off-by: Leo Ruan tingquan.ruan@cn.bosch.com Signed-off-by: Mark Jonas mark.jonas@de.bosch.com
drivers/gpu/ipu-v3/ipu-di.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c index b4a31d506fcc..74eca68891ad 100644 --- a/drivers/gpu/ipu-v3/ipu-di.c +++ b/drivers/gpu/ipu-v3/ipu-di.c @@ -451,8 +451,9 @@ static void ipu_di_config_clock(struct ipu_di *di,
error = rate / (sig->mode.pixelclock / 1000);
dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider%u, error %d.%u%%\n",
rate, div, (signed)(error - 1000) / 10, error % 10);
dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider%u, error %c%d.%d%%\n",
rate, div, error < 1000 ? '-' : '+',abs(error - 1000) / 10, abs(error - 1000) % 10);/* Allow a 1% error */ if (error < 1010 && error >= 990) {
Is there anything I can do to help getting this patch mainline?
Philipp is still on vacation, but will be back in a few days. I guess he will take a look at those patches then.
Regards, Lucas
Hi Mark,
On Mon, 2022-02-07 at 16:14 +0100, Mark Jonas wrote:
From: Leo Ruan tingquan.ruan@cn.bosch.com
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%.
Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
Signed-off-by: Leo Ruan tingquan.ruan@cn.bosch.com Signed-off-by: Mark Jonas mark.jonas@de.bosch.com
drivers/gpu/ipu-v3/ipu-di.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c index b4a31d506fcc..74eca68891ad 100644 --- a/drivers/gpu/ipu-v3/ipu-di.c +++ b/drivers/gpu/ipu-v3/ipu-di.c @@ -451,8 +451,9 @@ static void ipu_di_config_clock(struct ipu_di *di, error = rate / (sig->mode.pixelclock / 1000); - dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n", - rate, div, (signed)(error - 1000) / 10, error % 10); + dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %c%d.%d%%\n", + rate, div, error < 1000 ? '-' : '+', + abs(error - 1000) / 10, abs(error - 1000) % 10); /* Allow a 1% error */ if (error < 1010 && error >= 990) {
Rounding (always down) is still a bit unintuitive, but this certainly improves things.
Reviewed-by: Philipp Zabel p.zabel@pengutronix.de
regards Philipp
Hi,
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -
0.8%.
But the fixed point math had a flaw and calculated error of 0.2%.
Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU,
27000000Hz
After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU,
27000000Hz
Signed-off-by: Leo Ruan tingquan.ruan@cn.bosch.com Signed-off-by: Mark Jonas mark.jonas@de.bosch.com
drivers/gpu/ipu-v3/ipu-di.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c index b4a31d506fcc..74eca68891ad 100644 --- a/drivers/gpu/ipu-v3/ipu-di.c +++ b/drivers/gpu/ipu-v3/ipu-di.c @@ -451,8 +451,9 @@ static void ipu_di_config_clock(struct ipu_di *di,
error = rate / (sig->mode.pixelclock / 1000);
- dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n", - rate, div, (signed)(error - 1000) / 10, error % 10); + dev_dbg(di->ipu->dev, " IPU clock can give %lu with +divider %u, error %c%d.%d%%\n", + rate, div, error < 1000 ? '-' : '+', + abs(error - 1000) / 10, abs(error - 1000) % +10);
/* Allow a 1% error */ if (error < 1010 && error >= 990) {
Rounding (always down) is still a bit unintuitive, but this certainly improves things.
Reviewed-by: Philipp Zabel p.zabel@pengutronix.de
What are the chances of getting this patch into 5.18?
Can I do something to support the process?
Cheers, Mark
On Mo, 2022-02-07 at 16:14 +0100, Mark Jonas wrote:
From: Leo Ruan tingquan.ruan@cn.bosch.com
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%.
Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
Signed-off-by: Leo Ruan tingquan.ruan@cn.bosch.com Signed-off-by: Mark Jonas mark.jonas@de.bosch.com
drivers/gpu/ipu-v3/ipu-di.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu- di.c index b4a31d506fcc..74eca68891ad 100644 --- a/drivers/gpu/ipu-v3/ipu-di.c +++ b/drivers/gpu/ipu-v3/ipu-di.c @@ -451,8 +451,9 @@ static void ipu_di_config_clock(struct ipu_di *di, error = rate / (sig->mode.pixelclock / 1000); - dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n", - rate, div, (signed)(error - 1000) / 10, error % 10); + dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %c%d.%d%%\n", + rate, div, error < 1000 ? '-' : '+', + abs(error - 1000) / 10, abs(error - 1000) % 10); /* Allow a 1% error */ if (error < 1010 && error >= 990) {
Thank you, applied to imx-drm/fixes.
regards Philipp
dri-devel@lists.freedesktop.org
-
Jonas Mark (BT-FIR/ENG1-Grb) -
Lucas Stach -
Mark Jonas
-
Philipp Zabel