For HDMI2.0 CTS item - HF1-35, it verifies if the source generates video timing "64:27" video format correctly.
eg: (vic-76) 1920x1080p@60Hz,24bpp
This patch add on "64:27" and "256:135" to drm_aspect_ratio_enum_list. Thereafter, one can specify the aspect ratio to "64:27" or "256:135" after creating aspect ratio property.
Change-Id: Ifc9df54e8e8f78e70960fcd737a3a57e49c81152 Signed-off-by: Wayne Lin waynelin@amd.com --- drivers/gpu/drm/drm_connector.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index 3a0cacb71235..c0629a01d08e 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -772,6 +772,8 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = { { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" }, { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" }, { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, + { DRM_MODE_PICTURE_ASPECT_64_27, "64:27" }, + { DRM_MODE_PICTURE_ASPECT_256_135, "256:135" }, };
static const struct drm_prop_enum_list drm_content_type_enum_list[] = {
On 2019-08-22 5:50 p.m., Wayne Lin wrote:
Drop the Change-Id.
With that fixed this patch is
Reviewed-by: Harry Wentland harry.wentland@amd.com
Harry
________________________________ From: Ville Syrjälä ville.syrjala@linux.intel.com Sent: Saturday, August 24, 2019 02:41 To: Lin, Wayne Wayne.Lin@amd.com Cc: dri-devel@lists.freedesktop.org dri-devel@lists.freedesktop.org; amd-gfx@lists.freedesktop.org amd-gfx@lists.freedesktop.org; Li, Sun peng (Leo) Sunpeng.Li@amd.com; Kazlauskas, Nicholas Nicholas.Kazlauskas@amd.com Subject: Re: [PATCH] drm/drm_connector: add additional aspect ratio values
On Thu, Aug 22, 2019 at 05:50:02PM -0400, Wayne Lin wrote:
Not 100% sure we want to expose these via the property because the infoframe can't convey these independently from the VIC.
Agree with that it can't be independent from the VIC. When building up hdmi avi infoframe by using "drm_hdmi_avi_infoframe_from_display_mode" in drm_edid, it will refer to the VIC to set up the aspect ratio if the aspect ratio is not specified in mode. However, if the aspect ratio is specified to a value other than none, current logic of code will use the specified value.
The main reason of this patch is for capable indicating the exact VIC wanted. There are some modes defined in CTA-861 with same timing but different aspect ratio. eg: VIC 103 & VIC 93 Without these new definitions, we cannot distinguish these different modes and might set a wrong VIC in AVI infoframe.
-- Ville Syrjälä Intel
dri-devel@lists.freedesktop.org
-
Harry Wentland -
Lin, Wayne -
Ville Syrjälä -
Wayne Lin