fix: Add further confirm if external screens are involved.

log: In the actual tests, the IT66121 chip sometimes misjudged whether it had an external screen, so, reference the it66121_user_guid.pdf about Audio/Video data is stable or not A typical initialization of HDMI link should be based on interrupt signal and appropriate register probing. Recommended flow is detailed in IT66121 Programming Guide. Simply put, the microcontroller should monitor the HPD status first. Upon valid HPD event, move on to check RxSENDetect register to see if the receiver chip is ready for further handshaking. When RxSENDetect is asserted, start reading EDID data through DDC channels and carry on the rest of the handshaking subsequently.If the micro-controller makes no use of the interrupt signal as well as the above-mentioned status registers, the link establishment might fail. Please do follow the suggested initialization flow recommended in IT66121 Programming Guide. So, I add the IT66121_SYS_STATUS_SENDECTECT register status detection.

Signed-off-by: Yunlongli liyunlonga@uniontech.com --- drivers/gpu/drm/bridge/ite-it66121.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/ite-it66121.c b/drivers/gpu/drm/bridge/ite-it66121.c index 2f2a09adb4bc..9ed4fa298d11 100644 --- a/drivers/gpu/drm/bridge/ite-it66121.c +++ b/drivers/gpu/drm/bridge/ite-it66121.c @@ -523,7 +523,7 @@ static bool it66121_is_hpd_detect(struct it66121_ctx *ctx) if (regmap_read(ctx->regmap, IT66121_SYS_STATUS_REG, &val)) return false;

- return val & IT66121_SYS_STATUS_HPDETECT; + return ((val & IT66121_SYS_STATUS_HPDETECT) && (val & IT66121_SYS_STATUS_SENDECTECT)); }

static int it66121_bridge_attach(struct drm_bridge *bridge,