The enum dpu_clk_ctrl_type misses DPU_CLK_CTRL_DMA{2,3} even though this driver does actually handle both, if present: add the two in preparation for adding support for SoCs having them.
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index d2a945a27cfa..059e1402b7d0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -432,6 +432,8 @@ enum dpu_clk_ctrl_type { DPU_CLK_CTRL_RGB3, DPU_CLK_CTRL_DMA0, DPU_CLK_CTRL_DMA1, + DPU_CLK_CTRL_DMA2, + DPU_CLK_CTRL_DMA3, DPU_CLK_CTRL_CURSOR0, DPU_CLK_CTRL_CURSOR1, DPU_CLK_CTRL_INLINE_ROT0_SSPP,
Bringup functionality for MSM8998 in the DPU, driver which is mostly the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org --- .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 335 +++++++++++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + drivers/gpu/drm/msm/msm_drv.c | 1 + 3 files changed, 326 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index b131fd376192..f2cc715af782 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -16,6 +16,9 @@ BIT(DPU_SSPP_CSC_10BIT) | BIT(DPU_SSPP_CDP) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_EXCL_RECT))
+#define VIG_MSM8998_MASK \ + (VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED3)) + #define VIG_SDM845_MASK \ (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3))
@@ -25,6 +28,11 @@ #define VIG_SM8250_MASK \ (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE))
+#define DMA_MSM8998_MASK \ + (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) |\ + BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ + BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_EXCL_RECT)) + #define DMA_SDM845_MASK \ (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ @@ -33,6 +41,9 @@ #define DMA_CURSOR_SDM845_MASK \ (DMA_SDM845_MASK | BIT(DPU_SSPP_CURSOR))
+#define DMA_CURSOR_MSM8998_MASK \ + (DMA_MSM8998_MASK | BIT(DPU_SSPP_CURSOR)) + #define MIXER_SDM845_MASK \ (BIT(DPU_MIXER_SOURCESPLIT) | BIT(DPU_DIM_LAYER))
@@ -49,6 +60,8 @@
#define MERGE_3D_SM8150_MASK (0)
+#define DSPP_MSM8998_MASK (BIT(DPU_DSPP_PCC) | BIT(DPU_DSPP_GC)) + #define DSPP_SC7180_MASK BIT(DPU_DSPP_PCC)
#define INTF_SDM845_MASK (0) @@ -181,6 +194,22 @@ static const uint32_t plane_formats_yuv[] = { * DPU sub blocks config *************************************************************/ /* DPU top level caps */ +static const struct dpu_caps msm8998_dpu_caps = { + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .max_mixer_blendstages = 0x7, + .qseed_type = DPU_SSPP_SCALER_QSEED3, + .smart_dma_rev = DPU_SSPP_SMART_DMA_V1, + .ubwc_version = DPU_HW_UBWC_VER_10, + .has_src_split = true, + .has_dim_layer = true, + .has_idle_pc = true, + .has_3d_merge = true, + .max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, + .max_hdeci_exp = MAX_HORZ_DECIMATION, + .max_vdeci_exp = MAX_VERT_DECIMATION, +}; + static const struct dpu_caps sdm845_dpu_caps = { .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, .max_mixer_blendstages = 0xb, @@ -251,6 +280,35 @@ static const struct dpu_caps sc7280_dpu_caps = { .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, };
+static const struct dpu_mdp_cfg msm8998_mdp[] = { + { + .name = "top_0", .id = MDP_TOP, + .base = 0x0, .len = 0x458, + .features = 0, + .highest_bank_bit = 0x2, + .clk_ctrls[DPU_CLK_CTRL_VIG0] = { + .reg_off = 0x2AC, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_VIG1] = { + .reg_off = 0x2B4, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_VIG2] = { + .reg_off = 0x2BC, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_VIG3] = { + .reg_off = 0x2C4, .bit_off = 0}, + .clk_ctrls[DPU_CLK_CTRL_DMA0] = { + .reg_off = 0x2AC, .bit_off = 8}, + .clk_ctrls[DPU_CLK_CTRL_DMA1] = { + .reg_off = 0x2B4, .bit_off = 8}, + .clk_ctrls[DPU_CLK_CTRL_DMA2] = { + .reg_off = 0x2C4, .bit_off = 8}, + .clk_ctrls[DPU_CLK_CTRL_DMA3] = { + .reg_off = 0x2C4, .bit_off = 12}, + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { + .reg_off = 0x3A8, .bit_off = 15}, + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { + .reg_off = 0x3B0, .bit_off = 15}, + }, +}; + static const struct dpu_mdp_cfg sdm845_mdp[] = { { .name = "top_0", .id = MDP_TOP, @@ -339,6 +397,39 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = { /************************************************************* * CTL sub blocks config *************************************************************/ +static const struct dpu_ctl_cfg msm8998_ctl[] = { + { + .name = "ctl_0", .id = CTL_0, + .base = 0x1000, .len = 0x94, + .features = BIT(DPU_CTL_SPLIT_DISPLAY), + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9), + }, + { + .name = "ctl_1", .id = CTL_1, + .base = 0x1200, .len = 0x94, + .features = 0, + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10), + }, + { + .name = "ctl_2", .id = CTL_2, + .base = 0x1400, .len = 0x94, + .features = BIT(DPU_CTL_SPLIT_DISPLAY), + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11), + }, + { + .name = "ctl_3", .id = CTL_3, + .base = 0x1600, .len = 0x94, + .features = 0, + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12), + }, + { + .name = "ctl_4", .id = CTL_4, + .base = 0x1800, .len = 0x94, + .features = 0, + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13), + }, +}; + static const struct dpu_ctl_cfg sdm845_ctl[] = { { .name = "ctl_0", .id = CTL_0, @@ -497,6 +588,15 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = { .virt_num_formats = ARRAY_SIZE(plane_formats), \ }
+static const struct dpu_sspp_sub_blks msm8998_vig_sblk_0 = + _VIG_SBLK("0", 0, DPU_SSPP_SCALER_QSEED3); +static const struct dpu_sspp_sub_blks msm8998_vig_sblk_1 = + _VIG_SBLK("1", 0, DPU_SSPP_SCALER_QSEED3); +static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 = + _VIG_SBLK("2", 0, DPU_SSPP_SCALER_QSEED3); +static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 = + _VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3); + static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 = _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3); static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 = @@ -523,6 +623,25 @@ static const struct dpu_sspp_sub_blks sdm845_dma_sblk_3 = _DMA_SBLK("11", 4); .clk_ctrl = _clkctrl \ }
+static const struct dpu_sspp_cfg msm8998_sspp[] = { + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_MSM8998_MASK, + msm8998_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), + SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_MSM8998_MASK, + msm8998_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1), + SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_MSM8998_MASK, + msm8998_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2), + SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_MSM8998_MASK, + msm8998_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3), + SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_MSM8998_MASK, + sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0), + SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_MSM8998_MASK, + sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1), + SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_MSM8998_MASK, + sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0), + SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_MSM8998_MASK, + sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1), +}; + static const struct dpu_sspp_cfg sdm845_sspp[] = { SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SDM845_MASK, sdm845_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), @@ -599,17 +718,6 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = { * MIXER sub blocks config *************************************************************/
-/* SDM845 */ - -static const struct dpu_lm_sub_blks sdm845_lm_sblk = { - .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH, - .maxblendstages = 11, /* excluding base layer */ - .blendstage_base = { /* offsets relative to mixer base */ - 0x20, 0x38, 0x50, 0x68, 0x80, 0x98, - 0xb0, 0xc8, 0xe0, 0xf8, 0x110 - }, -}; - #define LM_BLK(_name, _id, _base, _fmask, _sblk, _pp, _lmpair, _dspp) \ { \ .name = _name, .id = _id, \ @@ -621,6 +729,43 @@ static const struct dpu_lm_sub_blks sdm845_lm_sblk = { .dspp = _dspp \ }
+/* MSM8998 */ + +static const struct dpu_lm_sub_blks msm8998_lm_sblk = { + .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .maxblendstages = 7, /* excluding base layer */ + .blendstage_base = { /* offsets relative to mixer base */ + 0x20, 0x50, 0x80, 0xb0, 0x230, + 0x260, 0x290 + }, +}; + +static const struct dpu_lm_cfg msm8998_lm[] = { + LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, + &msm8998_lm_sblk, PINGPONG_0, LM_2, DSPP_0), + LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK, + &msm8998_lm_sblk, PINGPONG_1, LM_5, DSPP_1), + LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK, + &msm8998_lm_sblk, PINGPONG_2, LM_0, 0), + LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK, + &msm8998_lm_sblk, PINGPONG_MAX, 0, 0), + LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK, + &msm8998_lm_sblk, PINGPONG_MAX, 0, 0), + LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK, + &msm8998_lm_sblk, PINGPONG_3, LM_1, 0), +}; + +/* SDM845 */ + +static const struct dpu_lm_sub_blks sdm845_lm_sblk = { + .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH, + .maxblendstages = 11, /* excluding base layer */ + .blendstage_base = { /* offsets relative to mixer base */ + 0x20, 0x38, 0x50, 0x68, 0x80, 0x98, + 0xb0, 0xc8, 0xe0, 0xf8, 0x110 + }, +}; + static const struct dpu_lm_cfg sdm845_lm[] = { LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_0, LM_1, 0), @@ -682,6 +827,13 @@ static const struct dpu_lm_cfg sc7280_lm[] = { /************************************************************* * DSPP sub blocks config *************************************************************/ +static const struct dpu_dspp_sub_blks msm8998_dspp_sblk = { + .pcc = {.id = DPU_DSPP_PCC, .base = 0x1700, + .len = 0x90, .version = 0x10007}, + .gc = { .id = DPU_DSPP_GC, .base = 0x17c0, + .len = 0x90, .version = 0x10007}, +}; + static const struct dpu_dspp_sub_blks sc7180_dspp_sblk = { .pcc = {.id = DPU_DSPP_PCC, .base = 0x1700, .len = 0x90, .version = 0x10000}, @@ -700,6 +852,13 @@ static const struct dpu_dspp_sub_blks sm8150_dspp_sblk = { .sblk = _sblk \ }
+static const struct dpu_dspp_cfg msm8998_dspp[] = { + DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_MSM8998_MASK, + &msm8998_dspp_sblk), + DSPP_BLK("dspp_1", DSPP_1, 0x56000, DSPP_MSM8998_MASK, + &msm8998_dspp_sblk), +}; + static const struct dpu_dspp_cfg sc7180_dspp[] = { DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK, &sc7180_dspp_sblk), @@ -836,6 +995,13 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = { .intr_vsync = DPU_IRQ_IDX(_reg, _vsync_bit), \ }
+static const struct dpu_intf_cfg msm8998_intf[] = { + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25), + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27), + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 28, 29), + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_HDMI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 30, 31), +}; + static const struct dpu_intf_cfg sdm845_intf[] = { INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25), INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27), @@ -865,9 +1031,55 @@ static const struct dpu_intf_cfg sc7280_intf[] = { * VBIF sub blocks config *************************************************************/ /* VBIF QOS remap */ +static const u32 msm8998_rt_pri_lvl[] = {1, 2, 2, 2}; +static const u32 msm8998_nrt_pri_lvl[] = {1, 1, 1, 1}; static const u32 sdm845_rt_pri_lvl[] = {3, 3, 4, 4, 5, 5, 6, 6}; static const u32 sdm845_nrt_pri_lvl[] = {3, 3, 3, 3, 3, 3, 3, 3};
+static const struct dpu_vbif_dynamic_ot_cfg msm8998_ot_rdwr_cfg[] = { + { + .pps = 1088 * 1920 * 30, + .ot_limit = 2, + }, + { + .pps = 1088 * 1920 * 60, + .ot_limit = 6, + }, + { + .pps = 3840 * 2160 * 30, + .ot_limit = 16, + }, +}; + +static const struct dpu_vbif_cfg msm8998_vbif[] = { + { + .name = "vbif_0", .id = VBIF_0, + .base = 0, .len = 0x1040, + .default_ot_rd_limit = 32, + .default_ot_wr_limit = 32, + .features = BIT(DPU_VBIF_QOS_REMAP) | BIT(DPU_VBIF_QOS_OTLIM), + .xin_halt_timeout = 0x4000, + .dynamic_ot_rd_tbl = { + .count = ARRAY_SIZE(msm8998_ot_rdwr_cfg), + .cfg = msm8998_ot_rdwr_cfg, + }, + .dynamic_ot_wr_tbl = { + .count = ARRAY_SIZE(msm8998_ot_rdwr_cfg), + .cfg = msm8998_ot_rdwr_cfg, + }, + .qos_rt_tbl = { + .npriority_lvl = ARRAY_SIZE(msm8998_rt_pri_lvl), + .priority_lvl = msm8998_rt_pri_lvl, + }, + .qos_nrt_tbl = { + .npriority_lvl = ARRAY_SIZE(msm8998_nrt_pri_lvl), + .priority_lvl = msm8998_nrt_pri_lvl, + }, + .memtype_count = 14, + .memtype = {2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2}, + }, +}; + static const struct dpu_vbif_cfg sdm845_vbif[] = { { .name = "vbif_0", .id = VBIF_0, @@ -908,6 +1120,22 @@ static const struct dpu_reg_dma_cfg sm8250_regdma = { *************************************************************/
/* SSPP QOS LUTs */ +static const struct dpu_qos_lut_entry msm8998_qos_linear[] = { + {.fl = 4, .lut = 0x1b}, + {.fl = 5, .lut = 0x5b}, + {.fl = 6, .lut = 0x15b}, + {.fl = 7, .lut = 0x55b}, + {.fl = 8, .lut = 0x155b}, + {.fl = 9, .lut = 0x555b}, + {.fl = 10, .lut = 0x1555b}, + {.fl = 11, .lut = 0x5555b}, + {.fl = 12, .lut = 0x15555b}, + {.fl = 13, .lut = 0x55555b}, + {.fl = 14, .lut = 0}, + {.fl = 1, .lut = 0x1b}, + {.fl = 0, .lut = 0} +}; + static const struct dpu_qos_lut_entry sdm845_qos_linear[] = { {.fl = 4, .lut = 0x357}, {.fl = 5, .lut = 0x3357}, @@ -923,6 +1151,15 @@ static const struct dpu_qos_lut_entry sdm845_qos_linear[] = { {.fl = 0, .lut = 0x11222222223357} };
+static const struct dpu_qos_lut_entry msm8998_qos_macrotile[] = { + {.fl = 10, .lut = 0x1aaff}, + {.fl = 11, .lut = 0x5aaff}, + {.fl = 12, .lut = 0x15aaff}, + {.fl = 13, .lut = 0x55aaff}, + {.fl = 1, .lut = 0x1aaff}, + {.fl = 0, .lut = 0}, +}; + static const struct dpu_qos_lut_entry sc7180_qos_linear[] = { {.fl = 0, .lut = 0x0011222222335777}, }; @@ -944,6 +1181,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { {.fl = 0, .lut = 0x0011223344556677}, };
+static const struct dpu_qos_lut_entry msm8998_qos_nrt[] = { + {.fl = 0, .lut = 0x0}, +}; + static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { {.fl = 0, .lut = 0x0}, }; @@ -952,6 +1193,48 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = { {.fl = 0, .lut = 0x0}, };
+static const struct dpu_perf_cfg msm8998_perf_data = { + .max_bw_low = 6700000, + .max_bw_high = 6700000, + .min_core_ib = 2400000, + .min_llcc_ib = 800000, + .min_dram_ib = 800000, + .core_ib_ff = "6.0", + .core_clk_ff = "1.0", + .comp_ratio_rt = + "NV12/5/1/1.23 AB24/5/1/1.23 XB24/5/1/1.23", + .comp_ratio_nrt = + "NV12/5/1/1.25 AB24/5/1/1.25 XB24/5/1/1.25", + .undersized_prefill_lines = 2, + .xtra_prefill_lines = 2, + .dest_scale_prefill_lines = 3, + .macrotile_prefill_lines = 4, + .yuv_nv12_prefill_lines = 8, + .linear_prefill_lines = 1, + .downscaling_prefill_lines = 1, + .amortizable_threshold = 25, + .min_prefill_lines = 25, + .danger_lut_tbl = {0xf, 0xffff, 0x0}, + .safe_lut_tbl = {0xfffc, 0xff00, 0xffff}, + .qos_lut_tbl = { + {.nentry = ARRAY_SIZE(msm8998_qos_linear), + .entries = msm8998_qos_linear + }, + {.nentry = ARRAY_SIZE(msm8998_qos_macrotile), + .entries = msm8998_qos_macrotile + }, + {.nentry = ARRAY_SIZE(msm8998_qos_nrt), + .entries = msm8998_qos_nrt + }, + }, + .cdp_cfg = { + {.rd_enable = 1, .wr_enable = 1}, + {.rd_enable = 1, .wr_enable = 0} + }, + .clk_inefficiency_factor = 200, + .bw_inefficiency_factor = 120, +}; + static const struct dpu_perf_cfg sdm845_perf_data = { .max_bw_low = 6800000, .max_bw_high = 6800000, @@ -1112,6 +1395,34 @@ static const struct dpu_perf_cfg sc7280_perf_data = { * Hardware catalog init *************************************************************/
+/* + * msm8998_cfg_init(): populate sdm845 dpu sub-blocks reg offsets + * and instance counts. + */ +static void msm8998_cfg_init(struct dpu_mdss_cfg *dpu_cfg) +{ + *dpu_cfg = (struct dpu_mdss_cfg){ + .caps = &msm8998_dpu_caps, + .mdp_count = ARRAY_SIZE(msm8998_mdp), + .mdp = msm8998_mdp, + .ctl_count = ARRAY_SIZE(msm8998_ctl), + .ctl = msm8998_ctl, + .sspp_count = ARRAY_SIZE(msm8998_sspp), + .sspp = msm8998_sspp, + .mixer_count = ARRAY_SIZE(msm8998_lm), + .mixer = msm8998_lm, + .pingpong_count = ARRAY_SIZE(sdm845_pp), + .pingpong = sdm845_pp, + .intf_count = ARRAY_SIZE(msm8998_intf), + .intf = msm8998_intf, + .vbif_count = ARRAY_SIZE(msm8998_vbif), + .vbif = msm8998_vbif, + .reg_dma_count = 0, + .perf = msm8998_perf_data, + .mdss_irqs = IRQ_SM8250_MASK, + }; +} + /* * sdm845_cfg_init(): populate sdm845 dpu sub-blocks reg offsets * and instance counts. @@ -1262,6 +1573,8 @@ static void sc7280_cfg_init(struct dpu_mdss_cfg *dpu_cfg) }
static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = { + { .hw_rev = DPU_HW_VER_300, .cfg_init = msm8998_cfg_init}, + { .hw_rev = DPU_HW_VER_301, .cfg_init = msm8998_cfg_init}, { .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init}, { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init}, diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index ae48f41821cf..c3305f10ca13 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1270,6 +1270,7 @@ static const struct dev_pm_ops dpu_pm_ops = { };
static const struct of_device_id dpu_dt_match[] = { + { .compatible = "qcom,msm8998-dpu", }, { .compatible = "qcom,sdm845-dpu", }, { .compatible = "qcom,sc7180-dpu", }, { .compatible = "qcom,sc7280-dpu", }, diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 2e6fc185e54d..22da51b7e1f4 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1398,6 +1398,7 @@ static void msm_pdev_shutdown(struct platform_device *pdev) static const struct of_device_id dt_match[] = { { .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 }, { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 }, + { .compatible = "qcom,msm8998-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
On 01/09/2021 21:11, AngeloGioacchino Del Regno wrote:
Bringup functionality for MSM8998 in the DPU, driver which is mostly the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 335 +++++++++++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + drivers/gpu/drm/msm/msm_drv.c | 1 + 3 files changed, 326 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index b131fd376192..f2cc715af782 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -16,6 +16,9 @@ BIT(DPU_SSPP_CSC_10BIT) | BIT(DPU_SSPP_CDP) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_EXCL_RECT))
+#define VIG_MSM8998_MASK \
- (VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED3))
- #define VIG_SDM845_MASK \ (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3))
@@ -25,6 +28,11 @@ #define VIG_SM8250_MASK \ (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE))
+#define DMA_MSM8998_MASK \
- (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) |\
- BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
- BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_EXCL_RECT))
- #define DMA_SDM845_MASK \ (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
@@ -33,6 +41,9 @@ #define DMA_CURSOR_SDM845_MASK \ (DMA_SDM845_MASK | BIT(DPU_SSPP_CURSOR))
+#define DMA_CURSOR_MSM8998_MASK \
- (DMA_MSM8998_MASK | BIT(DPU_SSPP_CURSOR))
- #define MIXER_SDM845_MASK \ (BIT(DPU_MIXER_SOURCESPLIT) | BIT(DPU_DIM_LAYER))
@@ -49,6 +60,8 @@
#define MERGE_3D_SM8150_MASK (0)
+#define DSPP_MSM8998_MASK (BIT(DPU_DSPP_PCC) | BIT(DPU_DSPP_GC))
#define DSPP_SC7180_MASK BIT(DPU_DSPP_PCC)
#define INTF_SDM845_MASK (0)
@@ -181,6 +194,22 @@ static const uint32_t plane_formats_yuv[] = {
- DPU sub blocks config
*************************************************************/ /* DPU top level caps */ +static const struct dpu_caps msm8998_dpu_caps = {
- .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .max_mixer_blendstages = 0x7,
- .qseed_type = DPU_SSPP_SCALER_QSEED3,
- .smart_dma_rev = DPU_SSPP_SMART_DMA_V1,
- .ubwc_version = DPU_HW_UBWC_VER_10,
- .has_src_split = true,
- .has_dim_layer = true,
- .has_idle_pc = true,
- .has_3d_merge = true,
- .max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
- .max_hdeci_exp = MAX_HORZ_DECIMATION,
- .max_vdeci_exp = MAX_VERT_DECIMATION,
+};
- static const struct dpu_caps sdm845_dpu_caps = { .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, .max_mixer_blendstages = 0xb,
@@ -251,6 +280,35 @@ static const struct dpu_caps sc7280_dpu_caps = { .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, };
+static const struct dpu_mdp_cfg msm8998_mdp[] = {
- {
- .name = "top_0", .id = MDP_TOP,
- .base = 0x0, .len = 0x458,
- .features = 0,
- .highest_bank_bit = 0x2,
- .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
.reg_off = 0x2AC, .bit_off = 0},- .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
.reg_off = 0x2B4, .bit_off = 0},- .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
.reg_off = 0x2BC, .bit_off = 0},- .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
.reg_off = 0x2C4, .bit_off = 0},- .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
.reg_off = 0x2AC, .bit_off = 8},- .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
.reg_off = 0x2B4, .bit_off = 8},- .clk_ctrls[DPU_CLK_CTRL_DMA2] = {
.reg_off = 0x2C4, .bit_off = 8},- .clk_ctrls[DPU_CLK_CTRL_DMA3] = {
.reg_off = 0x2C4, .bit_off = 12},- .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
.reg_off = 0x3A8, .bit_off = 15},- .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
.reg_off = 0x3B0, .bit_off = 15},- },
+};
- static const struct dpu_mdp_cfg sdm845_mdp[] = { { .name = "top_0", .id = MDP_TOP,
@@ -339,6 +397,39 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = { /*************************************************************
- CTL sub blocks config
*************************************************************/ +static const struct dpu_ctl_cfg msm8998_ctl[] = {
- {
- .name = "ctl_0", .id = CTL_0,
- .base = 0x1000, .len = 0x94,
- .features = BIT(DPU_CTL_SPLIT_DISPLAY),
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
- },
- {
- .name = "ctl_1", .id = CTL_1,
- .base = 0x1200, .len = 0x94,
- .features = 0,
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
- },
- {
- .name = "ctl_2", .id = CTL_2,
- .base = 0x1400, .len = 0x94,
- .features = BIT(DPU_CTL_SPLIT_DISPLAY),
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
- },
- {
- .name = "ctl_3", .id = CTL_3,
- .base = 0x1600, .len = 0x94,
- .features = 0,
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
- },
- {
- .name = "ctl_4", .id = CTL_4,
- .base = 0x1800, .len = 0x94,
- .features = 0,
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
- },
+};
- static const struct dpu_ctl_cfg sdm845_ctl[] = { { .name = "ctl_0", .id = CTL_0,
@@ -497,6 +588,15 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = { .virt_num_formats = ARRAY_SIZE(plane_formats), \ }
+static const struct dpu_sspp_sub_blks msm8998_vig_sblk_0 =
_VIG_SBLK("0", 0, DPU_SSPP_SCALER_QSEED3);+static const struct dpu_sspp_sub_blks msm8998_vig_sblk_1 =
_VIG_SBLK("1", 0, DPU_SSPP_SCALER_QSEED3);+static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 =
_VIG_SBLK("2", 0, DPU_SSPP_SCALER_QSEED3);+static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 =
_VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3);- static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 = _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3); static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =
@@ -523,6 +623,25 @@ static const struct dpu_sspp_sub_blks sdm845_dma_sblk_3 = _DMA_SBLK("11", 4); .clk_ctrl = _clkctrl \ }
+static const struct dpu_sspp_cfg msm8998_sspp[] = {
- SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_MSM8998_MASK,
msm8998_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),- SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_MSM8998_MASK,
msm8998_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),- SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_MSM8998_MASK,
msm8998_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),- SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_MSM8998_MASK,
msm8998_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),- SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_MSM8998_MASK,
sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),- SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_MSM8998_MASK,
sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),- SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_MSM8998_MASK,
sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),- SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_MSM8998_MASK,
sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),+};
- static const struct dpu_sspp_cfg sdm845_sspp[] = { SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SDM845_MASK, sdm845_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
@@ -599,17 +718,6 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
- MIXER sub blocks config
*************************************************************/
-/* SDM845 */
-static const struct dpu_lm_sub_blks sdm845_lm_sblk = {
- .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .maxblendstages = 11, /* excluding base layer */
- .blendstage_base = { /* offsets relative to mixer base */
0x20, 0x38, 0x50, 0x68, 0x80, 0x98,0xb0, 0xc8, 0xe0, 0xf8, 0x110- },
-};
- #define LM_BLK(_name, _id, _base, _fmask, _sblk, _pp, _lmpair, _dspp) \ { \ .name = _name, .id = _id, \
@@ -621,6 +729,43 @@ static const struct dpu_lm_sub_blks sdm845_lm_sblk = { .dspp = _dspp \ }
+/* MSM8998 */
+static const struct dpu_lm_sub_blks msm8998_lm_sblk = {
- .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .maxblendstages = 7, /* excluding base layer */
- .blendstage_base = { /* offsets relative to mixer base */
0x20, 0x50, 0x80, 0xb0, 0x230,0x260, 0x290- },
+};
+static const struct dpu_lm_cfg msm8998_lm[] = {
- LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_0, LM_2, DSPP_0),- LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_1, LM_5, DSPP_1),- LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_2, LM_0, 0),- LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_MAX, 0, 0),- LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_MAX, 0, 0),- LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_3, LM_1, 0),+};
+/* SDM845 */
+static const struct dpu_lm_sub_blks sdm845_lm_sblk = {
- .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .maxblendstages = 11, /* excluding base layer */
- .blendstage_base = { /* offsets relative to mixer base */
0x20, 0x38, 0x50, 0x68, 0x80, 0x98,0xb0, 0xc8, 0xe0, 0xf8, 0x110- },
+};
- static const struct dpu_lm_cfg sdm845_lm[] = { LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_0, LM_1, 0),
@@ -682,6 +827,13 @@ static const struct dpu_lm_cfg sc7280_lm[] = { /*************************************************************
- DSPP sub blocks config
*************************************************************/ +static const struct dpu_dspp_sub_blks msm8998_dspp_sblk = {
- .pcc = {.id = DPU_DSPP_PCC, .base = 0x1700,
.len = 0x90, .version = 0x10007},- .gc = { .id = DPU_DSPP_GC, .base = 0x17c0,
.len = 0x90, .version = 0x10007},+};
- static const struct dpu_dspp_sub_blks sc7180_dspp_sblk = { .pcc = {.id = DPU_DSPP_PCC, .base = 0x1700, .len = 0x90, .version = 0x10000},
@@ -700,6 +852,13 @@ static const struct dpu_dspp_sub_blks sm8150_dspp_sblk = { .sblk = _sblk \ }
+static const struct dpu_dspp_cfg msm8998_dspp[] = {
- DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_MSM8998_MASK,
&msm8998_dspp_sblk),- DSPP_BLK("dspp_1", DSPP_1, 0x56000, DSPP_MSM8998_MASK,
&msm8998_dspp_sblk),+};
- static const struct dpu_dspp_cfg sc7180_dspp[] = { DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK, &sc7180_dspp_sblk),
@@ -836,6 +995,13 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = { .intr_vsync = DPU_IRQ_IDX(_reg, _vsync_bit), \ }
+static const struct dpu_intf_cfg msm8998_intf[] = {
- INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
- INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
- INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
- INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_HDMI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
+};
- static const struct dpu_intf_cfg sdm845_intf[] = { INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25), INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
@@ -865,9 +1031,55 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
- VBIF sub blocks config
*************************************************************/ /* VBIF QOS remap */ +static const u32 msm8998_rt_pri_lvl[] = {1, 2, 2, 2}; +static const u32 msm8998_nrt_pri_lvl[] = {1, 1, 1, 1}; static const u32 sdm845_rt_pri_lvl[] = {3, 3, 4, 4, 5, 5, 6, 6}; static const u32 sdm845_nrt_pri_lvl[] = {3, 3, 3, 3, 3, 3, 3, 3};
+static const struct dpu_vbif_dynamic_ot_cfg msm8998_ot_rdwr_cfg[] = {
- {
.pps = 1088 * 1920 * 30,.ot_limit = 2,- },
- {
.pps = 1088 * 1920 * 60,.ot_limit = 6,- },
- {
.pps = 3840 * 2160 * 30,.ot_limit = 16,- },
+};
+static const struct dpu_vbif_cfg msm8998_vbif[] = {
- {
- .name = "vbif_0", .id = VBIF_0,
- .base = 0, .len = 0x1040,
- .default_ot_rd_limit = 32,
- .default_ot_wr_limit = 32,
- .features = BIT(DPU_VBIF_QOS_REMAP) | BIT(DPU_VBIF_QOS_OTLIM),
- .xin_halt_timeout = 0x4000,
- .dynamic_ot_rd_tbl = {
.count = ARRAY_SIZE(msm8998_ot_rdwr_cfg),.cfg = msm8998_ot_rdwr_cfg,},- .dynamic_ot_wr_tbl = {
.count = ARRAY_SIZE(msm8998_ot_rdwr_cfg),.cfg = msm8998_ot_rdwr_cfg,},- .qos_rt_tbl = {
.npriority_lvl = ARRAY_SIZE(msm8998_rt_pri_lvl),.priority_lvl = msm8998_rt_pri_lvl,},- .qos_nrt_tbl = {
.npriority_lvl = ARRAY_SIZE(msm8998_nrt_pri_lvl),.priority_lvl = msm8998_nrt_pri_lvl,},- .memtype_count = 14,
- .memtype = {2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2},
- },
+};
- static const struct dpu_vbif_cfg sdm845_vbif[] = { { .name = "vbif_0", .id = VBIF_0,
@@ -908,6 +1120,22 @@ static const struct dpu_reg_dma_cfg sm8250_regdma = { *************************************************************/
/* SSPP QOS LUTs */ +static const struct dpu_qos_lut_entry msm8998_qos_linear[] = {
- {.fl = 4, .lut = 0x1b},
- {.fl = 5, .lut = 0x5b},
- {.fl = 6, .lut = 0x15b},
- {.fl = 7, .lut = 0x55b},
- {.fl = 8, .lut = 0x155b},
- {.fl = 9, .lut = 0x555b},
- {.fl = 10, .lut = 0x1555b},
- {.fl = 11, .lut = 0x5555b},
- {.fl = 12, .lut = 0x15555b},
- {.fl = 13, .lut = 0x55555b},
- {.fl = 14, .lut = 0},
- {.fl = 1, .lut = 0x1b},
- {.fl = 0, .lut = 0}
+};
- static const struct dpu_qos_lut_entry sdm845_qos_linear[] = { {.fl = 4, .lut = 0x357}, {.fl = 5, .lut = 0x3357},
@@ -923,6 +1151,15 @@ static const struct dpu_qos_lut_entry sdm845_qos_linear[] = { {.fl = 0, .lut = 0x11222222223357} };
+static const struct dpu_qos_lut_entry msm8998_qos_macrotile[] = {
- {.fl = 10, .lut = 0x1aaff},
- {.fl = 11, .lut = 0x5aaff},
- {.fl = 12, .lut = 0x15aaff},
- {.fl = 13, .lut = 0x55aaff},
- {.fl = 1, .lut = 0x1aaff},
- {.fl = 0, .lut = 0},
+};
- static const struct dpu_qos_lut_entry sc7180_qos_linear[] = { {.fl = 0, .lut = 0x0011222222335777}, };
@@ -944,6 +1181,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { {.fl = 0, .lut = 0x0011223344556677}, };
+static const struct dpu_qos_lut_entry msm8998_qos_nrt[] = {
- {.fl = 0, .lut = 0x0},
+};
- static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { {.fl = 0, .lut = 0x0}, };
@@ -952,6 +1193,48 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = { {.fl = 0, .lut = 0x0}, };
+static const struct dpu_perf_cfg msm8998_perf_data = {
- .max_bw_low = 6700000,
- .max_bw_high = 6700000,
- .min_core_ib = 2400000,
- .min_llcc_ib = 800000,
- .min_dram_ib = 800000,
- .core_ib_ff = "6.0",
- .core_clk_ff = "1.0",
- .comp_ratio_rt =
- "NV12/5/1/1.23 AB24/5/1/1.23 XB24/5/1/1.23",
- .comp_ratio_nrt =
- "NV12/5/1/1.25 AB24/5/1/1.25 XB24/5/1/1.25",
- .undersized_prefill_lines = 2,
- .xtra_prefill_lines = 2,
- .dest_scale_prefill_lines = 3,
- .macrotile_prefill_lines = 4,
- .yuv_nv12_prefill_lines = 8,
- .linear_prefill_lines = 1,
- .downscaling_prefill_lines = 1,
- .amortizable_threshold = 25,
- .min_prefill_lines = 25,
- .danger_lut_tbl = {0xf, 0xffff, 0x0},
- .safe_lut_tbl = {0xfffc, 0xff00, 0xffff},
- .qos_lut_tbl = {
{.nentry = ARRAY_SIZE(msm8998_qos_linear),.entries = msm8998_qos_linear},{.nentry = ARRAY_SIZE(msm8998_qos_macrotile),.entries = msm8998_qos_macrotile},{.nentry = ARRAY_SIZE(msm8998_qos_nrt),.entries = msm8998_qos_nrt},- },
- .cdp_cfg = {
{.rd_enable = 1, .wr_enable = 1},{.rd_enable = 1, .wr_enable = 0}- },
- .clk_inefficiency_factor = 200,
- .bw_inefficiency_factor = 120,
+};
- static const struct dpu_perf_cfg sdm845_perf_data = { .max_bw_low = 6800000, .max_bw_high = 6800000,
@@ -1112,6 +1395,34 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
- Hardware catalog init
*************************************************************/
+/*
- msm8998_cfg_init(): populate sdm845 dpu sub-blocks reg offsets
- and instance counts.
- */
+static void msm8998_cfg_init(struct dpu_mdss_cfg *dpu_cfg) +{
- *dpu_cfg = (struct dpu_mdss_cfg){
.caps = &msm8998_dpu_caps,.mdp_count = ARRAY_SIZE(msm8998_mdp),.mdp = msm8998_mdp,.ctl_count = ARRAY_SIZE(msm8998_ctl),.ctl = msm8998_ctl,.sspp_count = ARRAY_SIZE(msm8998_sspp),.sspp = msm8998_sspp,.mixer_count = ARRAY_SIZE(msm8998_lm),.mixer = msm8998_lm,.pingpong_count = ARRAY_SIZE(sdm845_pp),.pingpong = sdm845_pp,.intf_count = ARRAY_SIZE(msm8998_intf),.intf = msm8998_intf,.vbif_count = ARRAY_SIZE(msm8998_vbif),.vbif = msm8998_vbif,.reg_dma_count = 0,.perf = msm8998_perf_data,.mdss_irqs = IRQ_SM8250_MASK,- };
+}
- /*
- sdm845_cfg_init(): populate sdm845 dpu sub-blocks reg offsets
- and instance counts.
@@ -1262,6 +1573,8 @@ static void sc7280_cfg_init(struct dpu_mdss_cfg *dpu_cfg) }
static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
- { .hw_rev = DPU_HW_VER_300, .cfg_init = msm8998_cfg_init},
- { .hw_rev = DPU_HW_VER_301, .cfg_init = msm8998_cfg_init}, { .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init}, { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index ae48f41821cf..c3305f10ca13 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1270,6 +1270,7 @@ static const struct dev_pm_ops dpu_pm_ops = { };
static const struct of_device_id dpu_dt_match[] = {
- { .compatible = "qcom,msm8998-dpu", }, { .compatible = "qcom,sdm845-dpu", }, { .compatible = "qcom,sc7180-dpu", }, { .compatible = "qcom,sc7280-dpu", },
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 2e6fc185e54d..22da51b7e1f4 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1398,6 +1398,7 @@ static void msm_pdev_shutdown(struct platform_device *pdev) static const struct of_device_id dt_match[] = { { .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 }, { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
- { .compatible = "qcom,msm8998-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
On 01/09/2021 21:11, AngeloGioacchino Del Regno wrote:
Bringup functionality for MSM8998 in the DPU, driver which is mostly the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
Few comments below
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 335 +++++++++++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + drivers/gpu/drm/msm/msm_drv.c | 1 + 3 files changed, 326 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index b131fd376192..f2cc715af782 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -16,6 +16,9 @@ BIT(DPU_SSPP_CSC_10BIT) | BIT(DPU_SSPP_CDP) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_EXCL_RECT))
+#define VIG_MSM8998_MASK \
- (VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED3))
- #define VIG_SDM845_MASK \ (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3))
@@ -25,6 +28,11 @@ #define VIG_SM8250_MASK \ (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE))
+#define DMA_MSM8998_MASK \
- (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) |\
- BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
- BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_EXCL_RECT))
It might be worth extracting the common mask (like VIG_MASK) from DMA_MSM8998_MASK and DMA_SDM845_MASK.
#define DMA_SDM845_MASK \ (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ @@ -33,6 +41,9 @@ #define DMA_CURSOR_SDM845_MASK \ (DMA_SDM845_MASK | BIT(DPU_SSPP_CURSOR))
+#define DMA_CURSOR_MSM8998_MASK \
- (DMA_MSM8998_MASK | BIT(DPU_SSPP_CURSOR))
- #define MIXER_SDM845_MASK \ (BIT(DPU_MIXER_SOURCESPLIT) | BIT(DPU_DIM_LAYER))
@@ -49,6 +60,8 @@
#define MERGE_3D_SM8150_MASK (0)
+#define DSPP_MSM8998_MASK (BIT(DPU_DSPP_PCC) | BIT(DPU_DSPP_GC))
#define DSPP_SC7180_MASK BIT(DPU_DSPP_PCC)
#define INTF_SDM845_MASK (0)
@@ -181,6 +194,22 @@ static const uint32_t plane_formats_yuv[] = {
- DPU sub blocks config
*************************************************************/ /* DPU top level caps */ +static const struct dpu_caps msm8998_dpu_caps = {
- .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .max_mixer_blendstages = 0x7,
- .qseed_type = DPU_SSPP_SCALER_QSEED3,
- .smart_dma_rev = DPU_SSPP_SMART_DMA_V1,
Having Smart DMA v1, it might be worth checking the virtual plane/multirect support posted few weeks ago. You will have to adapt the check function so that it works for v1.
This is definitely not a blocker for this patchset.
- .ubwc_version = DPU_HW_UBWC_VER_10,
- .has_src_split = true,
- .has_dim_layer = true,
- .has_idle_pc = true,
- .has_3d_merge = true,
- .max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
- .max_hdeci_exp = MAX_HORZ_DECIMATION,
- .max_vdeci_exp = MAX_VERT_DECIMATION,
+};
- static const struct dpu_caps sdm845_dpu_caps = { .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, .max_mixer_blendstages = 0xb,
@@ -251,6 +280,35 @@ static const struct dpu_caps sc7280_dpu_caps = { .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, };
+static const struct dpu_mdp_cfg msm8998_mdp[] = {
- {
- .name = "top_0", .id = MDP_TOP,
- .base = 0x0, .len = 0x458,
- .features = 0,
- .highest_bank_bit = 0x2,
- .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
.reg_off = 0x2AC, .bit_off = 0},- .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
.reg_off = 0x2B4, .bit_off = 0},- .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
.reg_off = 0x2BC, .bit_off = 0},- .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
.reg_off = 0x2C4, .bit_off = 0},- .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
.reg_off = 0x2AC, .bit_off = 8},- .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
.reg_off = 0x2B4, .bit_off = 8},- .clk_ctrls[DPU_CLK_CTRL_DMA2] = {
.reg_off = 0x2C4, .bit_off = 8},- .clk_ctrls[DPU_CLK_CTRL_DMA3] = {
.reg_off = 0x2C4, .bit_off = 12},- .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
.reg_off = 0x3A8, .bit_off = 15},- .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
.reg_off = 0x3B0, .bit_off = 15},- },
+};
- static const struct dpu_mdp_cfg sdm845_mdp[] = { { .name = "top_0", .id = MDP_TOP,
@@ -339,6 +397,39 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = { /*************************************************************
- CTL sub blocks config
*************************************************************/ +static const struct dpu_ctl_cfg msm8998_ctl[] = {
- {
- .name = "ctl_0", .id = CTL_0,
- .base = 0x1000, .len = 0x94,
- .features = BIT(DPU_CTL_SPLIT_DISPLAY),
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
- },
- {
- .name = "ctl_1", .id = CTL_1,
- .base = 0x1200, .len = 0x94,
- .features = 0,
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
- },
- {
- .name = "ctl_2", .id = CTL_2,
- .base = 0x1400, .len = 0x94,
- .features = BIT(DPU_CTL_SPLIT_DISPLAY),
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
- },
- {
- .name = "ctl_3", .id = CTL_3,
- .base = 0x1600, .len = 0x94,
- .features = 0,
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
- },
- {
- .name = "ctl_4", .id = CTL_4,
- .base = 0x1800, .len = 0x94,
- .features = 0,
- .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
- },
+};
- static const struct dpu_ctl_cfg sdm845_ctl[] = { { .name = "ctl_0", .id = CTL_0,
@@ -497,6 +588,15 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = { .virt_num_formats = ARRAY_SIZE(plane_formats), \ }
+static const struct dpu_sspp_sub_blks msm8998_vig_sblk_0 =
_VIG_SBLK("0", 0, DPU_SSPP_SCALER_QSEED3);+static const struct dpu_sspp_sub_blks msm8998_vig_sblk_1 =
_VIG_SBLK("1", 0, DPU_SSPP_SCALER_QSEED3);+static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 =
_VIG_SBLK("2", 0, DPU_SSPP_SCALER_QSEED3);+static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 =
_VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3);- static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 = _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3); static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =
@@ -523,6 +623,25 @@ static const struct dpu_sspp_sub_blks sdm845_dma_sblk_3 = _DMA_SBLK("11", 4); .clk_ctrl = _clkctrl \ }
+static const struct dpu_sspp_cfg msm8998_sspp[] = {
- SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_MSM8998_MASK,
msm8998_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),- SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_MSM8998_MASK,
msm8998_vig_sblk_1, 4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),- SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_MSM8998_MASK,
msm8998_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),- SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_MSM8998_MASK,
msm8998_vig_sblk_3, 12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),- SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_MSM8998_MASK,
sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),- SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_MSM8998_MASK,
sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),- SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_MSM8998_MASK,
sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),- SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_MSM8998_MASK,
sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),+};
- static const struct dpu_sspp_cfg sdm845_sspp[] = { SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SDM845_MASK, sdm845_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
@@ -599,17 +718,6 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
- MIXER sub blocks config
*************************************************************/
-/* SDM845 */
-static const struct dpu_lm_sub_blks sdm845_lm_sblk = {
- .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .maxblendstages = 11, /* excluding base layer */
- .blendstage_base = { /* offsets relative to mixer base */
0x20, 0x38, 0x50, 0x68, 0x80, 0x98,0xb0, 0xc8, 0xe0, 0xf8, 0x110- },
-};
- #define LM_BLK(_name, _id, _base, _fmask, _sblk, _pp, _lmpair, _dspp) \ { \ .name = _name, .id = _id, \
@@ -621,6 +729,43 @@ static const struct dpu_lm_sub_blks sdm845_lm_sblk = { .dspp = _dspp \ }
+/* MSM8998 */
+static const struct dpu_lm_sub_blks msm8998_lm_sblk = {
- .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .maxblendstages = 7, /* excluding base layer */
- .blendstage_base = { /* offsets relative to mixer base */
0x20, 0x50, 0x80, 0xb0, 0x230,0x260, 0x290- },
+};
+static const struct dpu_lm_cfg msm8998_lm[] = {
- LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_0, LM_2, DSPP_0),- LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_1, LM_5, DSPP_1),- LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_2, LM_0, 0),- LM_BLK("lm_3", LM_3, 0x47000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_MAX, 0, 0),- LM_BLK("lm_4", LM_4, 0x48000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_MAX, 0, 0),- LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK,
&msm8998_lm_sblk, PINGPONG_3, LM_1, 0),+};
+/* SDM845 */
+static const struct dpu_lm_sub_blks sdm845_lm_sblk = {
- .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
- .maxblendstages = 11, /* excluding base layer */
- .blendstage_base = { /* offsets relative to mixer base */
0x20, 0x38, 0x50, 0x68, 0x80, 0x98,0xb0, 0xc8, 0xe0, 0xf8, 0x110- },
+};
- static const struct dpu_lm_cfg sdm845_lm[] = { LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK, &sdm845_lm_sblk, PINGPONG_0, LM_1, 0),
@@ -682,6 +827,13 @@ static const struct dpu_lm_cfg sc7280_lm[] = { /*************************************************************
- DSPP sub blocks config
*************************************************************/ +static const struct dpu_dspp_sub_blks msm8998_dspp_sblk = {
- .pcc = {.id = DPU_DSPP_PCC, .base = 0x1700,
.len = 0x90, .version = 0x10007},- .gc = { .id = DPU_DSPP_GC, .base = 0x17c0,
.len = 0x90, .version = 0x10007},+};
- static const struct dpu_dspp_sub_blks sc7180_dspp_sblk = { .pcc = {.id = DPU_DSPP_PCC, .base = 0x1700, .len = 0x90, .version = 0x10000},
@@ -700,6 +852,13 @@ static const struct dpu_dspp_sub_blks sm8150_dspp_sblk = { .sblk = _sblk \ }
+static const struct dpu_dspp_cfg msm8998_dspp[] = {
- DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_MSM8998_MASK,
&msm8998_dspp_sblk),- DSPP_BLK("dspp_1", DSPP_1, 0x56000, DSPP_MSM8998_MASK,
&msm8998_dspp_sblk),+};
- static const struct dpu_dspp_cfg sc7180_dspp[] = { DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK, &sc7180_dspp_sblk),
@@ -836,6 +995,13 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = { .intr_vsync = DPU_IRQ_IDX(_reg, _vsync_bit), \ }
+static const struct dpu_intf_cfg msm8998_intf[] = {
- INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
- INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
- INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
- INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_HDMI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
+};
- static const struct dpu_intf_cfg sdm845_intf[] = { INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25), INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
@@ -865,9 +1031,55 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
- VBIF sub blocks config
*************************************************************/ /* VBIF QOS remap */ +static const u32 msm8998_rt_pri_lvl[] = {1, 2, 2, 2}; +static const u32 msm8998_nrt_pri_lvl[] = {1, 1, 1, 1}; static const u32 sdm845_rt_pri_lvl[] = {3, 3, 4, 4, 5, 5, 6, 6}; static const u32 sdm845_nrt_pri_lvl[] = {3, 3, 3, 3, 3, 3, 3, 3};
+static const struct dpu_vbif_dynamic_ot_cfg msm8998_ot_rdwr_cfg[] = {
- {
.pps = 1088 * 1920 * 30,.ot_limit = 2,- },
- {
.pps = 1088 * 1920 * 60,.ot_limit = 6,- },
- {
.pps = 3840 * 2160 * 30,.ot_limit = 16,- },
+};
+static const struct dpu_vbif_cfg msm8998_vbif[] = {
- {
- .name = "vbif_0", .id = VBIF_0,
- .base = 0, .len = 0x1040,
- .default_ot_rd_limit = 32,
- .default_ot_wr_limit = 32,
- .features = BIT(DPU_VBIF_QOS_REMAP) | BIT(DPU_VBIF_QOS_OTLIM),
- .xin_halt_timeout = 0x4000,
- .dynamic_ot_rd_tbl = {
.count = ARRAY_SIZE(msm8998_ot_rdwr_cfg),.cfg = msm8998_ot_rdwr_cfg,},- .dynamic_ot_wr_tbl = {
.count = ARRAY_SIZE(msm8998_ot_rdwr_cfg),.cfg = msm8998_ot_rdwr_cfg,},- .qos_rt_tbl = {
.npriority_lvl = ARRAY_SIZE(msm8998_rt_pri_lvl),.priority_lvl = msm8998_rt_pri_lvl,},- .qos_nrt_tbl = {
.npriority_lvl = ARRAY_SIZE(msm8998_nrt_pri_lvl),.priority_lvl = msm8998_nrt_pri_lvl,},- .memtype_count = 14,
- .memtype = {2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2},
- },
+};
- static const struct dpu_vbif_cfg sdm845_vbif[] = { { .name = "vbif_0", .id = VBIF_0,
@@ -908,6 +1120,22 @@ static const struct dpu_reg_dma_cfg sm8250_regdma = { *************************************************************/
/* SSPP QOS LUTs */ +static const struct dpu_qos_lut_entry msm8998_qos_linear[] = {
- {.fl = 4, .lut = 0x1b},
- {.fl = 5, .lut = 0x5b},
- {.fl = 6, .lut = 0x15b},
- {.fl = 7, .lut = 0x55b},
- {.fl = 8, .lut = 0x155b},
- {.fl = 9, .lut = 0x555b},
- {.fl = 10, .lut = 0x1555b},
- {.fl = 11, .lut = 0x5555b},
- {.fl = 12, .lut = 0x15555b},
- {.fl = 13, .lut = 0x55555b},
- {.fl = 14, .lut = 0},
- {.fl = 1, .lut = 0x1b},
- {.fl = 0, .lut = 0}
+};
- static const struct dpu_qos_lut_entry sdm845_qos_linear[] = { {.fl = 4, .lut = 0x357}, {.fl = 5, .lut = 0x3357},
@@ -923,6 +1151,15 @@ static const struct dpu_qos_lut_entry sdm845_qos_linear[] = { {.fl = 0, .lut = 0x11222222223357} };
+static const struct dpu_qos_lut_entry msm8998_qos_macrotile[] = {
- {.fl = 10, .lut = 0x1aaff},
- {.fl = 11, .lut = 0x5aaff},
- {.fl = 12, .lut = 0x15aaff},
- {.fl = 13, .lut = 0x55aaff},
- {.fl = 1, .lut = 0x1aaff},
- {.fl = 0, .lut = 0},
+};
- static const struct dpu_qos_lut_entry sc7180_qos_linear[] = { {.fl = 0, .lut = 0x0011222222335777}, };
@@ -944,6 +1181,10 @@ static const struct dpu_qos_lut_entry sc7180_qos_macrotile[] = { {.fl = 0, .lut = 0x0011223344556677}, };
+static const struct dpu_qos_lut_entry msm8998_qos_nrt[] = {
- {.fl = 0, .lut = 0x0},
+};
- static const struct dpu_qos_lut_entry sdm845_qos_nrt[] = { {.fl = 0, .lut = 0x0}, };
@@ -952,6 +1193,48 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = { {.fl = 0, .lut = 0x0}, };
+static const struct dpu_perf_cfg msm8998_perf_data = {
- .max_bw_low = 6700000,
- .max_bw_high = 6700000,
- .min_core_ib = 2400000,
- .min_llcc_ib = 800000,
- .min_dram_ib = 800000,
- .core_ib_ff = "6.0",
- .core_clk_ff = "1.0",
- .comp_ratio_rt =
- "NV12/5/1/1.23 AB24/5/1/1.23 XB24/5/1/1.23",
- .comp_ratio_nrt =
- "NV12/5/1/1.25 AB24/5/1/1.25 XB24/5/1/1.25",
- .undersized_prefill_lines = 2,
- .xtra_prefill_lines = 2,
- .dest_scale_prefill_lines = 3,
- .macrotile_prefill_lines = 4,
- .yuv_nv12_prefill_lines = 8,
- .linear_prefill_lines = 1,
- .downscaling_prefill_lines = 1,
- .amortizable_threshold = 25,
- .min_prefill_lines = 25,
- .danger_lut_tbl = {0xf, 0xffff, 0x0},
- .safe_lut_tbl = {0xfffc, 0xff00, 0xffff},
- .qos_lut_tbl = {
{.nentry = ARRAY_SIZE(msm8998_qos_linear),.entries = msm8998_qos_linear},{.nentry = ARRAY_SIZE(msm8998_qos_macrotile),.entries = msm8998_qos_macrotile},{.nentry = ARRAY_SIZE(msm8998_qos_nrt),.entries = msm8998_qos_nrt},- },
- .cdp_cfg = {
{.rd_enable = 1, .wr_enable = 1},{.rd_enable = 1, .wr_enable = 0}- },
- .clk_inefficiency_factor = 200,
- .bw_inefficiency_factor = 120,
+};
- static const struct dpu_perf_cfg sdm845_perf_data = { .max_bw_low = 6800000, .max_bw_high = 6800000,
@@ -1112,6 +1395,34 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
- Hardware catalog init
*************************************************************/
+/*
- msm8998_cfg_init(): populate sdm845 dpu sub-blocks reg offsets
- and instance counts.
- */
+static void msm8998_cfg_init(struct dpu_mdss_cfg *dpu_cfg) +{
- *dpu_cfg = (struct dpu_mdss_cfg){
.caps = &msm8998_dpu_caps,.mdp_count = ARRAY_SIZE(msm8998_mdp),.mdp = msm8998_mdp,.ctl_count = ARRAY_SIZE(msm8998_ctl),.ctl = msm8998_ctl,.sspp_count = ARRAY_SIZE(msm8998_sspp),.sspp = msm8998_sspp,.mixer_count = ARRAY_SIZE(msm8998_lm),.mixer = msm8998_lm,.pingpong_count = ARRAY_SIZE(sdm845_pp),.pingpong = sdm845_pp,.intf_count = ARRAY_SIZE(msm8998_intf),.intf = msm8998_intf,.vbif_count = ARRAY_SIZE(msm8998_vbif),.vbif = msm8998_vbif,.reg_dma_count = 0,.perf = msm8998_perf_data,.mdss_irqs = IRQ_SM8250_MASK,- };
+}
We definitely should replace functions with static data at some point.
- /*
- sdm845_cfg_init(): populate sdm845 dpu sub-blocks reg offsets
- and instance counts.
@@ -1262,6 +1573,8 @@ static void sc7280_cfg_init(struct dpu_mdss_cfg *dpu_cfg) }
static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
- { .hw_rev = DPU_HW_VER_300, .cfg_init = msm8998_cfg_init},
- { .hw_rev = DPU_HW_VER_301, .cfg_init = msm8998_cfg_init}, { .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init}, { .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init}, { .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index ae48f41821cf..c3305f10ca13 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1270,6 +1270,7 @@ static const struct dev_pm_ops dpu_pm_ops = { };
static const struct of_device_id dpu_dt_match[] = {
- { .compatible = "qcom,msm8998-dpu", }, { .compatible = "qcom,sdm845-dpu", }, { .compatible = "qcom,sc7180-dpu", }, { .compatible = "qcom,sc7280-dpu", },
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 2e6fc185e54d..22da51b7e1f4 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1398,6 +1398,7 @@ static void msm_pdev_shutdown(struct platform_device *pdev) static const struct of_device_id dt_match[] = { { .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 }, { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
- { .compatible = "qcom,msm8998-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU }, { .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
On Wed, Sep 1, 2021 at 12:11 PM AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org wrote:
Bringup functionality for MSM8998 in the DPU, driver which is mostly the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
I don't seem to see a cover letter for this series.
Eh, there are a fair number of differences between the MDSS versions for 8998 and 845.
Probably a bigger question, why extend the DPU driver for 8998, when the MDP5 driver already supports it[1]? The MDP/DPU split is pretty dumb, but I don't see a valid reason for both drivers supporting the same target/display revision. IMO, if you want this support in DPU, remove it from MDP5.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h...
Hi,
On Tue, 7 Sept 2021 at 22:13, Jeffrey Hugo jeffrey.l.hugo@gmail.com wrote:
On Wed, Sep 1, 2021 at 12:11 PM AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org wrote:
Bringup functionality for MSM8998 in the DPU, driver which is mostly the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
I don't seem to see a cover letter for this series.
Eh, there are a fair number of differences between the MDSS versions for 8998 and 845.
Probably a bigger question, why extend the DPU driver for 8998, when the MDP5 driver already supports it[1]? The MDP/DPU split is pretty dumb, but I don't see a valid reason for both drivers supporting the same target/display revision. IMO, if you want this support in DPU, remove it from MDP5.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h...
I don't think that we should enforce such requirements. Having support both in MDP5 and DPU would allow one to compare those two drivers, performance, features, etc. It might be that all MDP5-supported hardware would be also supported by DPU, thus allowing us to remove the former driver. But until that time I'd suggest leaving support in place.
On Wed, Sep 8, 2021 at 2:26 AM Dmitry Baryshkov dmitry.baryshkov@linaro.org wrote:
Hi,
On Tue, 7 Sept 2021 at 22:13, Jeffrey Hugo jeffrey.l.hugo@gmail.com wrote:
On Wed, Sep 1, 2021 at 12:11 PM AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org wrote:
Bringup functionality for MSM8998 in the DPU, driver which is mostly the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
I don't seem to see a cover letter for this series.
Eh, there are a fair number of differences between the MDSS versions for 8998 and 845.
Probably a bigger question, why extend the DPU driver for 8998, when the MDP5 driver already supports it[1]? The MDP/DPU split is pretty dumb, but I don't see a valid reason for both drivers supporting the same target/display revision. IMO, if you want this support in DPU, remove it from MDP5.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h...
I don't think that we should enforce such requirements. Having support both in MDP5 and DPU would allow one to compare those two drivers, performance, features, etc. It might be that all MDP5-supported hardware would be also supported by DPU, thus allowing us to remove the former driver. But until that time I'd suggest leaving support in place.
Well, then you have a host of problems to solve.
Lets ignore the code duplication for a minute and assume we've gone with this grand experiment. Two drivers enter, one leaves the victor.
How are the clients supposed to pick which driver to use in the mean time? We already have one DT binding for 8998 (which the MDP5 driver services). This series proposes a second. If we go forward with what you propose, we'll have two bindings for the same hardware, which IMO doesn't make sense in the context of DT, and the reason for that is to select which driver is "better". Driver selection is not supposed to be tied to DT like this.
So, some boards think MDP5 is better, and some boards think DPU is better. At some point, we decide one of the drivers is the clear winner (lets assume DPU). Then what happens to the existing DTs that were using the MDP5 description? Are they really compatible with DPU?
From a DT perspective, there should be one description, but then how
do you pick which driver to load? Both can't bind on the single description, and while you could argue that the users should build one driver or the other, but not both (thus picking which one at build time), that doesn't work for distros that want to build both drivers so that they can support all platforms with a single build (per arch).
From where I sit, your position starts with a good idea, but isn't
fully thought out and leads to problems.
If there is some reason why DPU is better for 8998, please enumerate it. Does DPU support some config that MDP5 doesn't, which is valuable to you? I'm ok with ripping out the MDP5 support, the reason I didn't go with DPU was that the DPU driver was clearly written only for 845 at the time, and needed significant rework to "downgrade" to an earlier hardware. However, the "reason" DPU exists separate from MDP5 is the claim that the MDP hardware underwent a significant rearchitecture, and thus it was too cumbersome to extend MDP5. While I disagree with the premise, that "rearch" started with 8998.
On 08/09/2021 17:22, Jeffrey Hugo wrote:
On Wed, Sep 8, 2021 at 2:26 AM Dmitry Baryshkov dmitry.baryshkov@linaro.org wrote:
Hi,
On Tue, 7 Sept 2021 at 22:13, Jeffrey Hugo jeffrey.l.hugo@gmail.com wrote:
On Wed, Sep 1, 2021 at 12:11 PM AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org wrote:
Bringup functionality for MSM8998 in the DPU, driver which is mostly the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
I don't seem to see a cover letter for this series.
Eh, there are a fair number of differences between the MDSS versions for 8998 and 845.
Probably a bigger question, why extend the DPU driver for 8998, when the MDP5 driver already supports it[1]? The MDP/DPU split is pretty dumb, but I don't see a valid reason for both drivers supporting the same target/display revision. IMO, if you want this support in DPU, remove it from MDP5.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h...
I don't think that we should enforce such requirements. Having support both in MDP5 and DPU would allow one to compare those two drivers, performance, features, etc. It might be that all MDP5-supported hardware would be also supported by DPU, thus allowing us to remove the former driver. But until that time I'd suggest leaving support in place.
Well, then you have a host of problems to solve.
Lets ignore the code duplication for a minute and assume we've gone with this grand experiment. Two drivers enter, one leaves the victor.
How are the clients supposed to pick which driver to use in the mean time? We already have one DT binding for 8998 (which the MDP5 driver services). This series proposes a second. If we go forward with what you propose, we'll have two bindings for the same hardware, which IMO doesn't make sense in the context of DT, and the reason for that is to select which driver is "better". Driver selection is not supposed to be tied to DT like this.
So, some boards think MDP5 is better, and some boards think DPU is better. At some point, we decide one of the drivers is the clear winner (lets assume DPU). Then what happens to the existing DTs that were using the MDP5 description? Are they really compatible with DPU?
From a DT perspective, there should be one description, but then how do you pick which driver to load? Both can't bind on the single description, and while you could argue that the users should build one driver or the other, but not both (thus picking which one at build time), that doesn't work for distros that want to build both drivers so that they can support all platforms with a single build (per arch).
Yep, the DT issue wasn't thought about from my side at the review time. I considered qcom,msm8998-dpu as an extension/upgrade of bare qcom,mdp5 compatibility string (as we usually add chip-specific compatibilities).
In fact using just 'qcom,mdp5' prevents us from having such kind of driver upgrades.
What I'd propose if everybody else agrees on moving 8998 (and maybe others later) from MDP5 to DPU would be to continue supporting qcom,mdp5 binding in the mdp5 driver and to add qcom,msm8998-dpu binding used by the DPU driver. Maybe with the warning telling to update the binding. Then at some point if all the MDP5-supported hardware is supported by the DPU we can drop the MDP5 driver and implement required bindings compatibility in the DPU.
From where I sit, your position starts with a good idea, but isn't fully thought out and leads to problems.
If there is some reason why DPU is better for 8998, please enumerate it. Does DPU support some config that MDP5 doesn't, which is valuable to you?
The DPU receives more attention from both Qualcomm and Linaro, so it will continue acquiring features (which MDP5 might not have at the moment).
For example consider the SmartDMA (multirect) support. For now the multirect patchset it is limited to newer versions, but it might be extended to support older chips (in the DPU) too. We did not have plans to backport SmartDMA v1 support to MDP5.
Writeback also has more chances to be supported in the DPU rather than in the MDP5 driver (I remember Rob's patches for the MDP5, but they never actually landed upstream).
Last but not least at this moment DPU has bandwidth scaling support, while MDP5 does not. I've sent a patch for MDP5 earlier, which then got reverted because of armv7 support. At this moment I did not resend it since we found some underrun issues on resume or when quickly changing bw down and up.
I'm ok with ripping out the MDP5 support, the reason I didn't go with DPU was that the DPU driver was clearly written only for 845 at the time, and needed significant rework to "downgrade" to an earlier hardware. However, the "reason" DPU exists separate from MDP5 is the claim that the MDP hardware underwent a significant rearchitecture, and thus it was too cumbersome to extend MDP5. While I disagree with the premise, that "rearch" started with 8998.
Just checked, the SDE, the origin (or parent) of the DPU driver starts it's support from the 8996 and 8998.
Il 09/09/21 15:46, Dmitry Baryshkov ha scritto:
On 08/09/2021 17:22, Jeffrey Hugo wrote:
On Wed, Sep 8, 2021 at 2:26 AM Dmitry Baryshkov dmitry.baryshkov@linaro.org wrote:
Hi,
On Tue, 7 Sept 2021 at 22:13, Jeffrey Hugo jeffrey.l.hugo@gmail.com wrote:
On Wed, Sep 1, 2021 at 12:11 PM AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org wrote:
Bringup functionality for MSM8998 in the DPU, driver which is mostly the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
I don't seem to see a cover letter for this series.
Eh, there are a fair number of differences between the MDSS versions for 8998 and 845.
Probably a bigger question, why extend the DPU driver for 8998, when the MDP5 driver already supports it[1]? The MDP/DPU split is pretty dumb, but I don't see a valid reason for both drivers supporting the same target/display revision. IMO, if you want this support in DPU, remove it from MDP5.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h...
I don't think that we should enforce such requirements. Having support both in MDP5 and DPU would allow one to compare those two drivers, performance, features, etc. It might be that all MDP5-supported hardware would be also supported by DPU, thus allowing us to remove the former driver. But until that time I'd suggest leaving support in place.
Well, then you have a host of problems to solve.
Lets ignore the code duplication for a minute and assume we've gone with this grand experiment. Two drivers enter, one leaves the victor.
I know you said let's ignore - but anyway, the code duplication is already there: DPU1 supports most of the features that are supported by the MDP5 driver *anyway*, lacking support for the very very old hardware.
How are the clients supposed to pick which driver to use in the mean time? We already have one DT binding for 8998 (which the MDP5 driver services). This series proposes a second. If we go forward with what you propose, we'll have two bindings for the same hardware, which IMO doesn't make sense in the context of DT, and the reason for that is to select which driver is "better". Driver selection is not supposed to be tied to DT like this.
So, some boards think MDP5 is better, and some boards think DPU is better. At some point, we decide one of the drivers is the clear winner (lets assume DPU). Then what happens to the existing DTs that were using the MDP5 description? Are they really compatible with DPU?
I don't see any MSM8998 dts/dtsi file using mdp5 upstream anyway, so we wouldn't even need to convert anything to using dpu1.
From a DT perspective, there should be one description, but then how do you pick which driver to load? Both can't bind on the single description, and while you could argue that the users should build one driver or the other, but not both (thus picking which one at build time), that doesn't work for distros that want to build both drivers so that they can support all platforms with a single build (per arch).
Yep, the DT issue wasn't thought about from my side at the review time. I considered qcom,msm8998-dpu as an extension/upgrade of bare qcom,mdp5 compatibility string (as we usually add chip-specific compatibilities).
In fact using just 'qcom,mdp5' prevents us from having such kind of driver upgrades.
What I'd propose if everybody else agrees on moving 8998 (and maybe others later) from MDP5 to DPU would be to continue supporting qcom,mdp5 binding in the mdp5 driver and to add qcom,msm8998-dpu binding used by the DPU driver. Maybe with the warning telling to update the binding. Then at some point if all the MDP5-supported hardware is supported by the DPU we can drop the MDP5 driver and implement required bindings compatibility in the DPU.
Since there's no upstream dtsi using mdp5, this problem practically does not exist. In any case, removing MSM8998 support from mdp5 is probably a good idea.. dpu1 is "more featureful" already, so it wouldn't really make sense to use mdp5 for a 8998 board right now. I've also validated this on different 8998 devices with both command mode and video mode panels (cmd on Sony Yoshino, video on FxTec Pro1) and they both work fine.
From where I sit, your position starts with a good idea, but isn't fully thought out and leads to problems.
If there is some reason why DPU is better for 8998, please enumerate it. Does DPU support some config that MDP5 doesn't, which is valuable to you?
The DPU receives more attention from both Qualcomm and Linaro, so it will continue acquiring features (which MDP5 might not have at the moment).
For example consider the SmartDMA (multirect) support. For now the multirect patchset it is limited to newer versions, but it might be extended to support older chips (in the DPU) too. We did not have plans to backport SmartDMA v1 support to MDP5.
Writeback also has more chances to be supported in the DPU rather than in the MDP5 driver (I remember Rob's patches for the MDP5, but they never actually landed upstream).
Not to mention the probably coming PCC support (since DSPP is already supported on DPU), and the fact that there's Display Stream Compression (DSC) support in the works (I saw some patches around on LKML), which is actually needed by at least the Sony Xperia XZ Premium (1080p scaled no dsc, or 4k non-scaled but needs dsc).
Last but not least at this moment DPU has bandwidth scaling support, while MDP5 does not. I've sent a patch for MDP5 earlier, which then got reverted because of armv7 support. At this moment I did not resend it since we found some underrun issues on resume or when quickly changing bw down and up.
I'm ok with ripping out the MDP5 support, the reason I didn't go with DPU was that the DPU driver was clearly written only for 845 at the time, and needed significant rework to "downgrade" to an earlier hardware. However, the "reason" DPU exists separate from MDP5 is the claim that the MDP hardware underwent a significant rearchitecture, and thus it was too cumbersome to extend MDP5. While I disagree with the premise, that "rearch" started with 8998.
Just checked, the SDE, the origin (or parent) of the DPU driver starts it's support from the 8996 and 8998.
Yes you are correct, I saw the same downstream, even though I've never tried SDE on MSM8996, on Sony downstream kernels we successfully use SDE on MSM8998 since we did the porting on the newer kernel (not sure, I think that was 3.18).
Also, sorry for not being immediately ready to reply to my own patch series, my days are a bit messy, currently.
Cheers, - Angelo
Add yaml binding for msm8998 dpu1 support.
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org --- .../bindings/display/msm/dpu-msm8998.yaml | 220 ++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml new file mode 100644 index 000000000000..db435342ecbf --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -0,0 +1,220 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for MSM8998 target + +maintainers: + - AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for MSM8998 target. + +properties: + compatible: + items: + - const: qcom,msm8998-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + ranges: true + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + items: + - const: qcom,msm8998-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for regdma register set + - description: Address offset and size for vbif register set + - description: Address offset and size for non-realtime vbif register set + + reg-names: + items: + - const: mdp + - const: regdma + - const: vbif + - const: vbif_nrt + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display mem-noc clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: mnoc + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF2 (DSI2) + + required: + - port@0 + - port@1 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8998.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@c900000 { + compatible = "qcom,msm8998-mdss"; + reg = <0x0c900000 0x1000>; + reg-names = "mdss"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + #address-cells = <1>; + #interrupt-cells = <1>; + #size-cells = <1>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + iommus = <&mmss_smmu 0>; + + power-domains = <&mmcc MDSS_GDSC>; + ranges; + status = "disabled"; + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; +...
On Wed, Sep 01, 2021 at 08:11:38PM +0200, AngeloGioacchino Del Regno wrote:
Add yaml binding for msm8998 dpu1 support.
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
.../bindings/display/msm/dpu-msm8998.yaml | 220 ++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml new file mode 100644 index 000000000000..db435342ecbf --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -0,0 +1,220 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm Display DPU dt properties for MSM8998 target
+maintainers:
- AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
+description: |
- Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
- sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
- bindings of MDSS and DPU are mentioned for MSM8998 target.
+properties:
- compatible:
- items:
- const: qcom,msm8998-mdss- reg:
- maxItems: 1
- reg-names:
- const: mdss
- power-domains:
- maxItems: 1
- clocks:
- items:
- description: Display AHB clock- description: Display AXI clock- description: Display core clock- clock-names:
- items:
- const: iface- const: bus- const: core- interrupts:
- maxItems: 1
- interrupt-controller: true
- "#address-cells": true
- "#size-cells": true
- "#interrupt-cells":
- const: 1
- iommus:
- items:
- description: Phandle to apps_smmu node with SID mask for Hard-Fail port0- ranges: true
+patternProperties:
- "^display-controller@[0-9a-f]+$":
- type: object
- description: Node containing the properties of DPU.
- properties:
compatible:items:- const: qcom,msm8998-dpureg:items:- description: Address offset and size for mdp register set- description: Address offset and size for regdma register set- description: Address offset and size for vbif register set- description: Address offset and size for non-realtime vbif register setreg-names:items:- const: mdp- const: regdma- const: vbif- const: vbif_nrtclocks:items:- description: Display ahb clock- description: Display axi clock- description: Display mem-noc clock- description: Display core clock- description: Display vsync clockclock-names:items:- const: iface- const: bus- const: mnoc- const: core- const: vsyncinterrupts:maxItems: 1power-domains:maxItems: 1operating-points-v2: trueports:$ref: /schemas/graph.yaml#/properties/portsdescription: |Contains the list of output ports from DPU device. These portsconnect to interfaces that are external to the DPU hardware,such as DSI, DP etc. Each output port contains an endpoint thatdescribes how it is connected to an external interface.properties:port@0:$ref: /schemas/graph.yaml#/properties/portdescription: DPU_INTF1 (DSI1)port@1:$ref: /schemas/graph.yaml#/properties/portdescription: DPU_INTF2 (DSI2)required:- port@0- port@1- required:
- compatible- reg- reg-names- clocks- interrupts- power-domains- operating-points-v2- ports+required:
- compatible
- reg
- reg-names
- power-domains
- clocks
- interrupts
- interrupt-controller
- iommus
- ranges
+additionalProperties: false
+examples:
- |
- #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
- display-subsystem@c900000 {
compatible = "qcom,msm8998-mdss";reg = <0x0c900000 0x1000>;reg-names = "mdss";clocks = <&mmcc MDSS_AHB_CLK>,<&mmcc MDSS_AXI_CLK>,<&mmcc MDSS_MDP_CLK>;clock-names = "iface", "bus", "core";#address-cells = <1>;#interrupt-cells = <1>;#size-cells = <1>;interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;interrupt-controller;iommus = <&mmss_smmu 0>;power-domains = <&mmcc MDSS_GDSC>;ranges;status = "disabled";
Drop. Why disable an example?
display-controller@c901000 {compatible = "qcom,msm8998-dpu";reg = <0x0c901000 0x8f000>,<0x0c9a8e00 0xf0>,<0x0c9b0000 0x2008>,<0x0c9b8000 0x1040>;reg-names = "mdp", "regdma", "vbif", "vbif_nrt";clocks = <&mmcc MDSS_AHB_CLK>,<&mmcc MDSS_AXI_CLK>,<&mmcc MNOC_AHB_CLK>,<&mmcc MDSS_MDP_CLK>,<&mmcc MDSS_VSYNC_CLK>;clock-names = "iface", "bus", "mnoc", "core", "vsync";interrupt-parent = <&mdss>;interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;operating-points-v2 = <&mdp_opp_table>;power-domains = <&rpmpd MSM8998_VDDMX>;ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;dpu_intf1_out: endpoint {remote-endpoint = <&dsi0_in>;};};port@1 {reg = <1>;dpu_intf2_out: endpoint {remote-endpoint = <&dsi1_in>;};};};};- };
+...
2.32.0
On 07/09/2021 21:37, Rob Herring wrote:
On Wed, Sep 01, 2021 at 08:11:38PM +0200, AngeloGioacchino Del Regno wrote:
Add yaml binding for msm8998 dpu1 support.
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
.../bindings/display/msm/dpu-msm8998.yaml | 220 ++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml new file mode 100644 index 000000000000..db435342ecbf --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -0,0 +1,220 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm Display DPU dt properties for MSM8998 target
+maintainers:
- AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
+description: |
- Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
- sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
- bindings of MDSS and DPU are mentioned for MSM8998 target.
+properties:
- compatible:
- items:
- const: qcom,msm8998-mdss- reg:
- maxItems: 1
- reg-names:
- const: mdss
- power-domains:
- maxItems: 1
- clocks:
- items:
- description: Display AHB clock- description: Display AXI clock- description: Display core clock- clock-names:
- items:
- const: iface- const: bus- const: core- interrupts:
- maxItems: 1
- interrupt-controller: true
- "#address-cells": true
- "#size-cells": true
- "#interrupt-cells":
- const: 1
- iommus:
- items:
- description: Phandle to apps_smmu node with SID mask for Hard-Fail port0- ranges: true
+patternProperties:
- "^display-controller@[0-9a-f]+$":
- type: object
- description: Node containing the properties of DPU.
- properties:
compatible:items:- const: qcom,msm8998-dpureg:items:- description: Address offset and size for mdp register set- description: Address offset and size for regdma register set- description: Address offset and size for vbif register set- description: Address offset and size for non-realtime vbif register setreg-names:items:- const: mdp- const: regdma- const: vbif- const: vbif_nrtclocks:items:- description: Display ahb clock- description: Display axi clock- description: Display mem-noc clock- description: Display core clock- description: Display vsync clockclock-names:items:- const: iface- const: bus- const: mnoc- const: core- const: vsyncinterrupts:maxItems: 1power-domains:maxItems: 1operating-points-v2: trueports:$ref: /schemas/graph.yaml#/properties/portsdescription: |Contains the list of output ports from DPU device. These portsconnect to interfaces that are external to the DPU hardware,such as DSI, DP etc. Each output port contains an endpoint thatdescribes how it is connected to an external interface.properties:port@0:$ref: /schemas/graph.yaml#/properties/portdescription: DPU_INTF1 (DSI1)port@1:$ref: /schemas/graph.yaml#/properties/portdescription: DPU_INTF2 (DSI2)required:- port@0- port@1- required:
- compatible- reg- reg-names- clocks- interrupts- power-domains- operating-points-v2- ports+required:
- compatible
- reg
- reg-names
- power-domains
- clocks
- interrupts
- interrupt-controller
- iommus
- ranges
+additionalProperties: false
+examples:
- |
- #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/power/qcom-rpmpd.h>
- display-subsystem@c900000 {
compatible = "qcom,msm8998-mdss";reg = <0x0c900000 0x1000>;reg-names = "mdss";clocks = <&mmcc MDSS_AHB_CLK>,<&mmcc MDSS_AXI_CLK>,<&mmcc MDSS_MDP_CLK>;clock-names = "iface", "bus", "core";#address-cells = <1>;#interrupt-cells = <1>;#size-cells = <1>;interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;interrupt-controller;iommus = <&mmss_smmu 0>;power-domains = <&mmcc MDSS_GDSC>;ranges;status = "disabled";Drop. Why disable an example?
AngeloGioacchino, could you please update and repost this patch series? I'd like to get it merged.
display-controller@c901000 {compatible = "qcom,msm8998-dpu";reg = <0x0c901000 0x8f000>,<0x0c9a8e00 0xf0>,<0x0c9b0000 0x2008>,<0x0c9b8000 0x1040>;reg-names = "mdp", "regdma", "vbif", "vbif_nrt";clocks = <&mmcc MDSS_AHB_CLK>,<&mmcc MDSS_AXI_CLK>,<&mmcc MNOC_AHB_CLK>,<&mmcc MDSS_MDP_CLK>,<&mmcc MDSS_VSYNC_CLK>;clock-names = "iface", "bus", "mnoc", "core", "vsync";interrupt-parent = <&mdss>;interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;operating-points-v2 = <&mdp_opp_table>;power-domains = <&rpmpd MSM8998_VDDMX>;ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;dpu_intf1_out: endpoint {remote-endpoint = <&dsi0_in>;};};port@1 {reg = <1>;dpu_intf2_out: endpoint {remote-endpoint = <&dsi1_in>;};};};};- };
+...
2.32.0
Il 25/11/21 12:53, Dmitry Baryshkov ha scritto:
On 07/09/2021 21:37, Rob Herring wrote:
On Wed, Sep 01, 2021 at 08:11:38PM +0200, AngeloGioacchino Del Regno wrote:
Add yaml binding for msm8998 dpu1 support.
Signed-off-by: AngeloGioacchino Del Regno
angelogioacchino.delregno@somainline.org
.../bindings/display/msm/dpu-msm8998.yaml | 220 ++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml new file mode 100644 index 000000000000..db435342ecbf --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -0,0 +1,220 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +---
<snip>
+ power-domains = <&mmcc MDSS_GDSC>; + ranges; + status = "disabled";
Drop. Why disable an example?
AngeloGioacchino, could you please update and repost this patch series? I'd like to get it merged.
Hey Dmitry,
Sure I can! Will update/rebase/fix as soon as I find some spare time around.
Thanks, - Angelo
On 01/09/2021 21:11, AngeloGioacchino Del Regno wrote:
The enum dpu_clk_ctrl_type misses DPU_CLK_CTRL_DMA{2,3} even though this driver does actually handle both, if present: add the two in preparation for adding support for SoCs having them.
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index d2a945a27cfa..059e1402b7d0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -432,6 +432,8 @@ enum dpu_clk_ctrl_type { DPU_CLK_CTRL_RGB3, DPU_CLK_CTRL_DMA0, DPU_CLK_CTRL_DMA1,
- DPU_CLK_CTRL_DMA2,
- DPU_CLK_CTRL_DMA3, DPU_CLK_CTRL_CURSOR0, DPU_CLK_CTRL_CURSOR1, DPU_CLK_CTRL_INLINE_ROT0_SSPP,
On 01/09/2021 21:11, AngeloGioacchino Del Regno wrote:
The enum dpu_clk_ctrl_type misses DPU_CLK_CTRL_DMA{2,3} even though this driver does actually handle both, if present: add the two in preparation for adding support for SoCs having them.
Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@somainline.org
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index d2a945a27cfa..059e1402b7d0 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -432,6 +432,8 @@ enum dpu_clk_ctrl_type { DPU_CLK_CTRL_RGB3, DPU_CLK_CTRL_DMA0, DPU_CLK_CTRL_DMA1,
- DPU_CLK_CTRL_DMA2,
- DPU_CLK_CTRL_DMA3, DPU_CLK_CTRL_CURSOR0, DPU_CLK_CTRL_CURSOR1, DPU_CLK_CTRL_INLINE_ROT0_SSPP,
dri-devel@lists.freedesktop.org
-
AngeloGioacchino Del Regno -
Dmitry Baryshkov -
Jeffrey Hugo -
Rob Herring