Elements of the 'names' array are not changed by the code, constify them for consistency.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/opp/core.c | 6 +++--- include/linux/pm_opp.h | 8 ++++---- 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c index 04b4691a8aac..3057beabd370 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -2348,12 +2348,12 @@ static void _opp_detach_genpd(struct opp_table *opp_table) * "required-opps" are added in DT. */ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, - const char **names, struct device ***virt_devs) + const char * const *names, struct device ***virt_devs) { struct opp_table *opp_table; struct device *virt_dev; int index = 0, ret = -EINVAL; - const char **name = names; + const char * const *name = names;

opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) @@ -2457,7 +2457,7 @@ static void devm_pm_opp_detach_genpd(void *data) * * Return: 0 on success and errorno otherwise. */ -int devm_pm_opp_attach_genpd(struct device *dev, const char **names, +int devm_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs) { struct opp_table *opp_table; diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index a95d6fdd20b6..879c138c7b8e 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -156,9 +156,9 @@ int devm_pm_opp_set_clkname(struct device *dev, const char *name); struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table); int devm_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); -struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs); +struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs); void dev_pm_opp_detach_genpd(struct opp_table *opp_table); -int devm_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs); +int devm_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs); struct dev_pm_opp *dev_pm_opp_xlate_required_opp(struct opp_table *src_table, struct opp_table *dst_table, struct dev_pm_opp *src_opp); int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate); int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq); @@ -376,7 +376,7 @@ static inline int devm_pm_opp_set_clkname(struct device *dev, const char *name) return -EOPNOTSUPP; }

-static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs) +static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs) { return ERR_PTR(-EOPNOTSUPP); } @@ -384,7 +384,7 @@ static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, cons static inline void dev_pm_opp_detach_genpd(struct opp_table *opp_table) {}

static inline int devm_pm_opp_attach_genpd(struct device *dev, - const char **names, + const char * const *names, struct device ***virt_devs) { return -EOPNOTSUPP;

Disable PMC state syncing in order to ensure that we won't break older kernels once device-trees will be updated with the addition of the power domains. This also allows to apply device-tree PM patches independently from the driver patches.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/soc/tegra/pmc.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 50091c4ec948..fb8faf7b226a 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -360,6 +360,7 @@ struct tegra_pmc_soc { unsigned int num_pmc_clks; bool has_blink_output; bool has_usb_sleepwalk; + bool supports_core_domain; };

/** @@ -3041,6 +3042,7 @@ static void tegra20_pmc_setup_irq_polarity(struct tegra_pmc *pmc, }

static const struct tegra_pmc_soc tegra20_pmc_soc = { + .supports_core_domain = false, .num_powergates = ARRAY_SIZE(tegra20_powergates), .powergates = tegra20_powergates, .num_cpu_powergates = 0, @@ -3101,6 +3103,7 @@ static const char * const tegra30_reset_sources[] = { };

static const struct tegra_pmc_soc tegra30_pmc_soc = { + .supports_core_domain = false, .num_powergates = ARRAY_SIZE(tegra30_powergates), .powergates = tegra30_powergates, .num_cpu_powergates = ARRAY_SIZE(tegra30_cpu_powergates), @@ -3157,6 +3160,7 @@ static const u8 tegra114_cpu_powergates[] = { };

static const struct tegra_pmc_soc tegra114_pmc_soc = { + .supports_core_domain = false, .num_powergates = ARRAY_SIZE(tegra114_powergates), .powergates = tegra114_powergates, .num_cpu_powergates = ARRAY_SIZE(tegra114_cpu_powergates), @@ -3273,6 +3277,7 @@ static const struct pinctrl_pin_desc tegra124_pin_descs[] = { };

static const struct tegra_pmc_soc tegra124_pmc_soc = { + .supports_core_domain = false, .num_powergates = ARRAY_SIZE(tegra124_powergates), .powergates = tegra124_powergates, .num_cpu_powergates = ARRAY_SIZE(tegra124_cpu_powergates), @@ -3398,6 +3403,7 @@ static const struct tegra_wake_event tegra210_wake_events[] = { };

static const struct tegra_pmc_soc tegra210_pmc_soc = { + .supports_core_domain = false, .num_powergates = ARRAY_SIZE(tegra210_powergates), .powergates = tegra210_powergates, .num_cpu_powergates = ARRAY_SIZE(tegra210_cpu_powergates), @@ -3555,6 +3561,7 @@ static const struct tegra_wake_event tegra186_wake_events[] = { };

static const struct tegra_pmc_soc tegra186_pmc_soc = { + .supports_core_domain = false, .num_powergates = 0, .powergates = NULL, .num_cpu_powergates = 0, @@ -3689,6 +3696,7 @@ static const struct tegra_wake_event tegra194_wake_events[] = { };

static const struct tegra_pmc_soc tegra194_pmc_soc = { + .supports_core_domain = false, .num_powergates = 0, .powergates = NULL, .num_cpu_powergates = 0, @@ -3757,6 +3765,7 @@ static const char * const tegra234_reset_sources[] = { };

static const struct tegra_pmc_soc tegra234_pmc_soc = { + .supports_core_domain = false, .num_powergates = 0, .powergates = NULL, .num_cpu_powergates = 0, @@ -3803,6 +3812,14 @@ static void tegra_pmc_sync_state(struct device *dev) { int err;

+ /* + * Newer device-trees have power domains, but we need to prepare all + * device drivers with runtime PM and OPP support first, otherwise + * state syncing is unsafe. + */ + if (!pmc->soc->supports_core_domain) + return; + /* * Older device-trees don't have core PD, and thus, there are * no dependencies that will block the state syncing. We shouldn't

Document sub-nodes which describe Tegra SoC clocks that require a higher voltage of the core power domain in order to operate properly on a higher clock rates. Each node contains a phandle to OPP table and power domain.

The root PLLs and system clocks don't have any specific device dedicated to them, clock controller is in charge of managing power for them.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- .../bindings/clock/nvidia,tegra20-car.yaml | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml index 459d2a525393..f832abb7f11a 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml @@ -42,6 +42,36 @@ properties: "#reset-cells": const: 1

+patternProperties: + "^(sclk)|(pll-[cem])$": + type: object + properties: + compatible: + enum: + - nvidia,tegra20-sclk + - nvidia,tegra30-sclk + - nvidia,tegra30-pllc + - nvidia,tegra30-plle + - nvidia,tegra30-pllm + + operating-points-v2: true + + clocks: + items: + - description: node's clock + + power-domains: + maxItems: 1 + description: phandle to the core SoC power domain + + required: + - compatible + - operating-points-v2 + - clocks + - power-domains + + additionalProperties: false + required: - compatible - reg @@ -59,6 +89,13 @@ examples: reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + + sclk { + compatible = "nvidia,tegra20-sclk"; + operating-points-v2 = <&opp_table>; + clocks = <&tegra_car TEGRA20_CLK_SCLK>; + power-domains = <&domain>; + }; };

usb-controller@c5004000 {

The Clock-and-Reset controller resides in a core power domain on NVIDIA Tegra SoCs. In order to support voltage scaling of the core power domain, we hook up DVFS-capable clocks to the core GENPD for managing of the GENPD's performance state based on the clock changes.

Some clocks don't have any specific physical hardware unit that backs them, like root PLLs and system clock and they have theirs own voltage requirements. This patch adds new clk-device driver that backs the clocks and provides runtime PM functionality for them. A virtual clk-device is created for each such DVFS-capable clock at the clock's registration time by the new tegra_clk_register() helper. Driver changes clock's device GENPD performance state based on clk-rate notifications.

In result we have this sequence of events:

1. Clock driver creates virtual device for selective clocks, enables runtime PM for the created device and registers the clock. 2. Clk-device driver starts to listen to clock rate changes. 3. Something changes clk rate or enables/disables clk. 4. CCF core propagates the change through the clk tree. 5. Clk-device driver gets clock rate-change notification or GENPD core handles prepare/unprepare of the clock. 6. Clk-device driver changes GENPD performance state on clock rate change. 7. GENPD driver changes voltage regulator state change. 8. The regulator state is committed to hardware via I2C.

We rely on fact that DVFS is not needed for Tegra I2C and that Tegra I2C driver already keeps clock always-prepared. Hence I2C subsystem stays independent from the clk power management and there are no deadlock spots in the sequence.

Currently all clocks are registered very early during kernel boot when the device driver core isn't available yet. The clk-device can't be created at that time. This patch splits the registration of the clocks in two phases:

1. Register all essential clocks which don't use RPM and are needed during early boot.

2. Register at a later boot time the rest of clocks.

This patch adds power management support for Tegra20 and Tegra30 clocks.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/clk/tegra/Makefile | 1 + drivers/clk/tegra/clk-device.c | 222 ++++++++++++++++++++++++++++++++ drivers/clk/tegra/clk-pll.c | 2 +- drivers/clk/tegra/clk-super.c | 2 +- drivers/clk/tegra/clk-tegra20.c | 77 ++++++++--- drivers/clk/tegra/clk-tegra30.c | 116 ++++++++++++----- drivers/clk/tegra/clk.c | 75 ++++++++++- drivers/clk/tegra/clk.h | 2 + 8 files changed, 443 insertions(+), 54 deletions(-) create mode 100644 drivers/clk/tegra/clk-device.c

diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile index 7b1816856eb5..a0715cdfc1a4 100644 --- a/drivers/clk/tegra/Makefile +++ b/drivers/clk/tegra/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-y += clk.o obj-y += clk-audio-sync.o +obj-y += clk-device.o obj-y += clk-dfll.o obj-y += clk-divider.o obj-y += clk-periph.o diff --git a/drivers/clk/tegra/clk-device.c b/drivers/clk/tegra/clk-device.c new file mode 100644 index 000000000000..9463c285b2a5 --- /dev/null +++ b/drivers/clk/tegra/clk-device.c @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_opp.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> + +#include <soc/tegra/common.h> + +#include "clk.h" + +/* + * This driver manages performance state of the core power domain for the + * independent PLLs and system clocks. We created a virtual clock device + * for such clocks, see tegra_clk_dev_register(). + */ + +struct tegra_clk_device { + struct notifier_block clk_nb; + struct device *dev; + struct clk_hw *hw; + struct mutex lock; +}; + +static int tegra_clock_set_pd_state(struct tegra_clk_device *clk_dev, + unsigned long rate) +{ + struct device *dev = clk_dev->dev; + struct dev_pm_opp *opp; + unsigned int pstate; + + opp = dev_pm_opp_find_freq_ceil(dev, &rate); + if (opp == ERR_PTR(-ERANGE)) { + dev_dbg(dev, "failed to find ceil OPP for %luHz\n", rate); + opp = dev_pm_opp_find_freq_floor(dev, &rate); + } + + if (IS_ERR(opp)) { + dev_err(dev, "failed to find OPP for %luHz: %pe\n", rate, opp); + return PTR_ERR(opp); + } + + pstate = dev_pm_opp_get_required_pstate(opp, 0); + dev_pm_opp_put(opp); + + return dev_pm_genpd_set_performance_state(dev, pstate); +} + +static int tegra_clock_change_notify(struct notifier_block *nb, + unsigned long msg, void *data) +{ + struct clk_notifier_data *cnd = data; + struct tegra_clk_device *clk_dev; + int err = 0; + + clk_dev = container_of(nb, struct tegra_clk_device, clk_nb); + + mutex_lock(&clk_dev->lock); + switch (msg) { + case PRE_RATE_CHANGE: + if (cnd->new_rate > cnd->old_rate) + err = tegra_clock_set_pd_state(clk_dev, cnd->new_rate); + break; + + case ABORT_RATE_CHANGE: + err = tegra_clock_set_pd_state(clk_dev, cnd->old_rate); + break; + + case POST_RATE_CHANGE: + if (cnd->new_rate < cnd->old_rate) + err = tegra_clock_set_pd_state(clk_dev, cnd->new_rate); + break; + + default: + break; + } + mutex_unlock(&clk_dev->lock); + + return notifier_from_errno(err); +} + +static int tegra_clock_sync_pd_state(struct tegra_clk_device *clk_dev) +{ + unsigned long rate; + int ret = 0; + + mutex_lock(&clk_dev->lock); + + if (!pm_runtime_status_suspended(clk_dev->dev)) { + rate = clk_hw_get_rate(clk_dev->hw); + ret = tegra_clock_set_pd_state(clk_dev, rate); + } + + mutex_unlock(&clk_dev->lock); + + return ret; +} + +static int tegra_clock_probe(struct platform_device *pdev) +{ + struct tegra_clk_device *clk_dev; + struct device *dev = &pdev->dev; + struct clk *clk; + int err; + + if (!dev->pm_domain) + return -EINVAL; + + clk_dev = devm_kzalloc(dev, sizeof(*clk_dev), GFP_KERNEL); + if (!clk_dev) + return -ENOMEM; + + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clk_dev->dev = dev; + clk_dev->hw = __clk_get_hw(clk); + clk_dev->clk_nb.notifier_call = tegra_clock_change_notify; + mutex_init(&clk_dev->lock); + + platform_set_drvdata(pdev, clk_dev); + + err = devm_tegra_core_dev_init_opp_table_common(dev); + if (err) + return err; + + err = clk_notifier_register(clk, &clk_dev->clk_nb); + if (err) { + dev_err(dev, "failed to register clk notifier: %d\n", err); + return err; + } + + /* + * The driver is attaching to a potentially active/resumed clock, hence + * we need to sync the power domain performance state in a accordance to + * the clock rate if clock is resumed. + */ + err = tegra_clock_sync_pd_state(clk_dev); + if (err) + goto unreg_clk; + + return 0; + +unreg_clk: + clk_notifier_unregister(clk, &clk_dev->clk_nb); + + return err; +} + +static __maybe_unused int tegra_clock_pm_suspend(struct device *dev) +{ + struct tegra_clk_device *clk_dev = dev_get_drvdata(dev); + + /* + * Power management of the clock is entangled with the Tegra PMC + * GENPD because PMC driver enables/disables clocks for toggling + * of the PD's on/off state. + * + * The PMC GENPD is resumed in NOIRQ phase, before RPM of the clocks + * becomes available, hence PMC can't use clocks at the early resume + * phase if RPM is involved. For example when 3d clock is enabled, + * it may enable the parent PLL clock that needs to be RPM-resumed. + * + * Secondly, the PLL clocks may be enabled by the low level suspend + * code, so we need to assume that PLL is in enabled state during + * suspend. + * + * We will keep PLLs and system clock resumed during suspend time. + * All PLLs on all SoCs are low power and system clock is always-on, + * so practically not much is changed here. + */ + + return clk_prepare(clk_dev->hw->clk); +} + +static __maybe_unused int tegra_clock_pm_resume(struct device *dev) +{ + struct tegra_clk_device *clk_dev = dev_get_drvdata(dev); + + clk_unprepare(clk_dev->hw->clk); + + return 0; +} + +static void tegra_clock_shutdown(struct platform_device *pdev) +{ + struct tegra_clk_device *clk_dev = platform_get_drvdata(pdev); + + clk_prepare(clk_dev->hw->clk); +} + +static const struct dev_pm_ops tegra_clock_pm = { + SET_SYSTEM_SLEEP_PM_OPS(tegra_clock_pm_suspend, + tegra_clock_pm_resume) +}; + +static const struct of_device_id tegra_clock_match[] = { + { .compatible = "nvidia,tegra20-sclk" }, + { .compatible = "nvidia,tegra30-sclk" }, + { .compatible = "nvidia,tegra30-pllc" }, + { .compatible = "nvidia,tegra30-plle" }, + { .compatible = "nvidia,tegra30-pllm" }, + { } +}; + +static struct platform_driver tegra_clock_driver = { + .driver = { + .name = "tegra-clock", + .of_match_table = tegra_clock_match, + .pm = &tegra_clock_pm, + .suppress_bind_attrs = true, + }, + .probe = tegra_clock_probe, + .shutdown = tegra_clock_shutdown, +}; +builtin_platform_driver(tegra_clock_driver); diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index eaa079c177c3..100b5d9b7e26 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -1914,7 +1914,7 @@ static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll, /* Data in .init is copied by clk_register(), so stack variable OK */ pll->hw.init = &init;

- return clk_register(NULL, &pll->hw); + return tegra_clk_dev_register(&pll->hw); }

struct clk *tegra_clk_register_pll(const char *name, const char *parent_name, diff --git a/drivers/clk/tegra/clk-super.c b/drivers/clk/tegra/clk-super.c index 6099c6e9acd4..a98a420398fa 100644 --- a/drivers/clk/tegra/clk-super.c +++ b/drivers/clk/tegra/clk-super.c @@ -226,7 +226,7 @@ struct clk *tegra_clk_register_super_mux(const char *name, /* Data in .init is copied by clk_register(), so stack variable OK */ super->hw.init = &init;

- clk = clk_register(NULL, &super->hw); + clk = tegra_clk_dev_register(&super->hw); if (IS_ERR(clk)) kfree(super);

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 3664593a5ba4..be3c33441cfc 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -6,8 +6,11 @@ #include <linux/io.h> #include <linux/clk-provider.h> #include <linux/clkdev.h> +#include <linux/init.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> #include <linux/clk/tegra.h> #include <linux/delay.h> #include <dt-bindings/clock/tegra20-car.h> @@ -414,7 +417,7 @@ static struct tegra_clk_pll_params pll_e_params = { .fixed_rate = 100000000, };

-static struct tegra_devclk devclks[] __initdata = { +static struct tegra_devclk devclks[] = { { .con_id = "pll_c", .dt_id = TEGRA20_CLK_PLL_C }, { .con_id = "pll_c_out1", .dt_id = TEGRA20_CLK_PLL_C_OUT1 }, { .con_id = "pll_p", .dt_id = TEGRA20_CLK_PLL_P }, @@ -710,13 +713,6 @@ static void tegra20_super_clk_init(void) NULL); clks[TEGRA20_CLK_CCLK] = clk;

- /* SCLK */ - clk = tegra_clk_register_super_mux("sclk", sclk_parents, - ARRAY_SIZE(sclk_parents), - CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, - clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL); - clks[TEGRA20_CLK_SCLK] = clk; - /* twd */ clk = clk_register_fixed_factor(NULL, "twd", "cclk", 0, 1, 4); clks[TEGRA20_CLK_TWD] = clk; @@ -1014,7 +1010,7 @@ static struct tegra_cpu_car_ops tegra20_cpu_car_ops = { #endif };

-static struct tegra_clk_init_table init_table[] __initdata = { +static struct tegra_clk_init_table init_table[] = { { TEGRA20_CLK_PLL_P, TEGRA20_CLK_CLK_MAX, 216000000, 1 }, { TEGRA20_CLK_PLL_P_OUT1, TEGRA20_CLK_CLK_MAX, 28800000, 1 }, { TEGRA20_CLK_PLL_P_OUT2, TEGRA20_CLK_CLK_MAX, 48000000, 1 }, @@ -1052,11 +1048,6 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA20_CLK_CLK_MAX, TEGRA20_CLK_CLK_MAX, 0, 0 }, };

-static void __init tegra20_clock_apply_init_table(void) -{ - tegra_init_from_table(init_table, clks, TEGRA20_CLK_CLK_MAX); -} - /* * Some clocks may be used by different drivers depending on the board * configuration. List those here to register them twice in the clock lookup @@ -1076,6 +1067,8 @@ static const struct of_device_id pmc_match[] __initconst = { { }, };

+static bool tegra20_car_initialized; + static struct clk *tegra20_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data) { @@ -1083,6 +1076,16 @@ static struct clk *tegra20_clk_src_onecell_get(struct of_phandle_args *clkspec, struct clk_hw *hw; struct clk *clk;

+ /* + * Timer clocks are needed early, the rest of the clocks shouldn't be + * available to device drivers until clock tree is fully initialized. + */ + if (clkspec->args[0] != TEGRA20_CLK_RTC && + clkspec->args[0] != TEGRA20_CLK_TWD && + clkspec->args[0] != TEGRA20_CLK_TIMER && + !tegra20_car_initialized) + return ERR_PTR(-EPROBE_DEFER); + clk = of_clk_src_onecell_get(clkspec, data); if (IS_ERR(clk)) return clk; @@ -1149,10 +1152,48 @@ static void __init tegra20_clock_init(struct device_node *np) tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA20_CLK_CLK_MAX);

tegra_add_of_provider(np, tegra20_clk_src_onecell_get); - tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); - - tegra_clk_apply_init_table = tegra20_clock_apply_init_table;

tegra_cpu_car_ops = &tegra20_cpu_car_ops; } -CLK_OF_DECLARE(tegra20, "nvidia,tegra20-car", tegra20_clock_init); +CLK_OF_DECLARE_DRIVER(tegra20, "nvidia,tegra20-car", tegra20_clock_init); + +/* + * Clocks that use runtime PM can't be created at the tegra20_clock_init + * time because drivers' base isn't initialized yet, and thus platform + * devices can't be created for the clocks. Hence we need to split the + * registration of the clocks into two phases. The first phase registers + * essential clocks which don't require RPM and are actually used during + * early boot. The second phase registers clocks which use RPM and this + * is done when device drivers' core API is ready. + */ +static int tegra20_car_probe(struct platform_device *pdev) +{ + struct clk *clk; + + clk = tegra_clk_register_super_mux("sclk", sclk_parents, + ARRAY_SIZE(sclk_parents), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL); + clks[TEGRA20_CLK_SCLK] = clk; + + tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); + tegra_init_from_table(init_table, clks, TEGRA20_CLK_CLK_MAX); + tegra20_car_initialized = true; + + return 0; +} + +static const struct of_device_id tegra20_car_match[] = { + { .compatible = "nvidia,tegra20-car" }, + { } +}; + +static struct platform_driver tegra20_car_driver = { + .driver = { + .name = "tegra20-car", + .of_match_table = tegra20_car_match, + .suppress_bind_attrs = true, + }, + .probe = tegra20_car_probe, +}; +builtin_platform_driver(tegra20_car_driver); diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index 64121bc66d85..04b496123820 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -7,8 +7,11 @@ #include <linux/delay.h> #include <linux/clk-provider.h> #include <linux/clkdev.h> +#include <linux/init.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> #include <linux/clk/tegra.h>

#include <soc/tegra/pmc.h> @@ -532,7 +535,7 @@ static unsigned long tegra30_input_freq[] = { [12] = 26000000, };

-static struct tegra_devclk devclks[] __initdata = { +static struct tegra_devclk devclks[] = { { .con_id = "pll_c", .dt_id = TEGRA30_CLK_PLL_C }, { .con_id = "pll_c_out1", .dt_id = TEGRA30_CLK_PLL_C_OUT1 }, { .con_id = "pll_p", .dt_id = TEGRA30_CLK_PLL_P }, @@ -812,11 +815,6 @@ static void __init tegra30_pll_init(void) { struct clk *clk;

- /* PLLC */ - clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0, - &pll_c_params, NULL); - clks[TEGRA30_CLK_PLL_C] = clk; - /* PLLC_OUT1 */ clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c", clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP, @@ -826,11 +824,6 @@ static void __init tegra30_pll_init(void) 0, NULL); clks[TEGRA30_CLK_PLL_C_OUT1] = clk;

- /* PLLM */ - clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base, - CLK_SET_RATE_GATE, &pll_m_params, NULL); - clks[TEGRA30_CLK_PLL_M] = clk; - /* PLLM_OUT1 */ clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m", clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP, @@ -880,9 +873,6 @@ static void __init tegra30_pll_init(void) ARRAY_SIZE(pll_e_parents), CLK_SET_RATE_NO_REPARENT, clk_base + PLLE_AUX, 2, 1, 0, NULL); - clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base, - CLK_GET_RATE_NOCACHE, &pll_e_params, NULL); - clks[TEGRA30_CLK_PLL_E] = clk; }

static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", @@ -971,14 +961,6 @@ static void __init tegra30_super_clk_init(void) NULL); clks[TEGRA30_CLK_CCLK_LP] = clk;

- /* SCLK */ - clk = tegra_clk_register_super_mux("sclk", sclk_parents, - ARRAY_SIZE(sclk_parents), - CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, - clk_base + SCLK_BURST_POLICY, - 0, 4, 0, 0, NULL); - clks[TEGRA30_CLK_SCLK] = clk; - /* twd */ clk = clk_register_fixed_factor(NULL, "twd", "cclk_g", CLK_SET_RATE_PARENT, 1, 2); @@ -1214,7 +1196,7 @@ static struct tegra_cpu_car_ops tegra30_cpu_car_ops = { #endif };

-static struct tegra_clk_init_table init_table[] __initdata = { +static struct tegra_clk_init_table init_table[] = { { TEGRA30_CLK_UARTA, TEGRA30_CLK_PLL_P, 408000000, 0 }, { TEGRA30_CLK_UARTB, TEGRA30_CLK_PLL_P, 408000000, 0 }, { TEGRA30_CLK_UARTC, TEGRA30_CLK_PLL_P, 408000000, 0 }, @@ -1259,11 +1241,6 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA30_CLK_CLK_MAX, TEGRA30_CLK_CLK_MAX, 0, 0 }, };

-static void __init tegra30_clock_apply_init_table(void) -{ - tegra_init_from_table(init_table, clks, TEGRA30_CLK_CLK_MAX); -} - /* * Some clocks may be used by different drivers depending on the board * configuration. List those here to register them twice in the clock lookup @@ -1294,12 +1271,24 @@ static struct tegra_audio_clk_info tegra30_audio_plls[] = { { "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_p_out1" }, };

+static bool tegra30_car_initialized; + static struct clk *tegra30_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data) { struct clk_hw *hw; struct clk *clk;

+ /* + * Timer clocks are needed early, the rest of the clocks shouldn't be + * available to device drivers until clock tree is fully initialized. + */ + if (clkspec->args[0] != TEGRA30_CLK_RTC && + clkspec->args[0] != TEGRA30_CLK_TWD && + clkspec->args[0] != TEGRA30_CLK_TIMER && + !tegra30_car_initialized) + return ERR_PTR(-EPROBE_DEFER); + clk = of_clk_src_onecell_get(clkspec, data); if (IS_ERR(clk)) return clk; @@ -1357,10 +1346,75 @@ static void __init tegra30_clock_init(struct device_node *np) tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX);

tegra_add_of_provider(np, tegra30_clk_src_onecell_get); + + tegra_cpu_car_ops = &tegra30_cpu_car_ops; +} +CLK_OF_DECLARE_DRIVER(tegra30, "nvidia,tegra30-car", tegra30_clock_init); + +/* + * Clocks that use runtime PM can't be created at the tegra30_clock_init + * time because drivers' base isn't initialized yet, and thus platform + * devices can't be created for the clocks. Hence we need to split the + * registration of the clocks into two phases. The first phase registers + * essential clocks which don't require RPM and are actually used during + * early boot. The second phase registers clocks which use RPM and this + * is done when device drivers' core API is ready. + */ +static int tegra30_car_probe(struct platform_device *pdev) +{ + struct clk *clk; + + /* PLLC */ + clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0, + &pll_c_params, NULL); + clks[TEGRA30_CLK_PLL_C] = clk; + + /* PLLE */ + clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base, + CLK_GET_RATE_NOCACHE, &pll_e_params, NULL); + clks[TEGRA30_CLK_PLL_E] = clk; + + /* PLLM */ + clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base, + CLK_SET_RATE_GATE, &pll_m_params, NULL); + clks[TEGRA30_CLK_PLL_M] = clk; + + /* SCLK */ + clk = tegra_clk_register_super_mux("sclk", sclk_parents, + ARRAY_SIZE(sclk_parents), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + clk_base + SCLK_BURST_POLICY, + 0, 4, 0, 0, NULL); + clks[TEGRA30_CLK_SCLK] = clk; + tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); + tegra_init_from_table(init_table, clks, TEGRA30_CLK_CLK_MAX); + tegra30_car_initialized = true;

- tegra_clk_apply_init_table = tegra30_clock_apply_init_table; + return 0; +}

- tegra_cpu_car_ops = &tegra30_cpu_car_ops; +static const struct of_device_id tegra30_car_match[] = { + { .compatible = "nvidia,tegra30-car" }, + { } +}; + +static struct platform_driver tegra30_car_driver = { + .driver = { + .name = "tegra30-car", + .of_match_table = tegra30_car_match, + .suppress_bind_attrs = true, + }, + .probe = tegra30_car_probe, +}; + +/* + * Clock driver must be registered before memory controller driver, + * which doesn't support deferred probing for today and is registered + * from arch init-level. + */ +static int tegra30_car_init(void) +{ + return platform_driver_register(&tegra30_car_driver); } -CLK_OF_DECLARE(tegra30, "nvidia,tegra30-car", tegra30_clock_init); +postcore_initcall(tegra30_car_init); diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c index f6cdce441cf7..26bda45813c0 100644 --- a/drivers/clk/tegra/clk.c +++ b/drivers/clk/tegra/clk.c @@ -9,14 +9,19 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/clk/tegra.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/reset-controller.h> +#include <linux/string.h>

#include <soc/tegra/fuse.h>

#include "clk.h"

/* Global data of Tegra CPU CAR ops */ +static struct device_node *tegra_car_np; static struct tegra_cpu_car_ops dummy_car_ops; struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops;

@@ -261,8 +266,8 @@ void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list, } }

-void __init tegra_init_from_table(struct tegra_clk_init_table *tbl, - struct clk *clks[], int clk_max) +void tegra_init_from_table(struct tegra_clk_init_table *tbl, + struct clk *clks[], int clk_max) { struct clk *clk;

@@ -320,6 +325,8 @@ void __init tegra_add_of_provider(struct device_node *np, { int i;

+ tegra_car_np = np; + for (i = 0; i < clk_num; i++) { if (IS_ERR(clks[i])) { pr_err @@ -348,7 +355,7 @@ void __init tegra_init_special_resets(unsigned int num, special_reset_deassert = deassert; }

-void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num) +void tegra_register_devclks(struct tegra_devclk *dev_clks, int num) { int i;

@@ -372,6 +379,68 @@ struct clk ** __init tegra_lookup_dt_id(int clk_id, return NULL; }

+static struct device_node *tegra_clk_get_of_node(struct clk_hw *hw) +{ + struct device_node *np; + char *node_name; + + node_name = kstrdup(hw->init->name, GFP_KERNEL); + if (!node_name) + return NULL; + + strreplace(node_name, '_', '-'); + + for_each_child_of_node(tegra_car_np, np) { + if (!strcmp(np->name, node_name)) + break; + } + + kfree(node_name); + + return np; +} + +struct clk *tegra_clk_dev_register(struct clk_hw *hw) +{ + struct platform_device *pdev, *parent; + const char *dev_name = NULL; + struct device *dev = NULL; + struct device_node *np; + + np = tegra_clk_get_of_node(hw); + + if (!of_device_is_available(np)) + goto put_node; + + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); + if (!dev_name) + goto put_node; + + parent = of_find_device_by_node(tegra_car_np); + if (parent) { + pdev = of_platform_device_create(np, dev_name, &parent->dev); + put_device(&parent->dev); + + if (!pdev) { + pr_err("%s: failed to create device for %pOF\n", + __func__, np); + goto free_name; + } + + dev = &pdev->dev; + pm_runtime_enable(dev); + } else { + WARN(1, "failed to find device for %pOF\n", tegra_car_np); + } + +free_name: + kfree(dev_name); +put_node: + of_node_put(np); + + return clk_register(dev, hw); +} + tegra_clk_apply_init_table_func tegra_clk_apply_init_table;

static int __init tegra_clocks_apply_init_table(void) diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 0c3ba0ccce1a..5d80d8b79b8e 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -927,4 +927,6 @@ struct clk *tegra20_clk_register_emc(void __iomem *ioaddr, bool low_jitter); struct clk *tegra210_clk_register_emc(struct device_node *np, void __iomem *regs);

+struct clk *tegra_clk_dev_register(struct clk_hw *hw); + #endif /* TEGRA_CLK_H */

Memory Client should be blocked before hardware reset is asserted in order to prevent memory corruption and hanging of memory controller.

Document Memory Client resets of Host1x, GR2D and GR3D hardware units.

Reviewed-by: Rob Herring robh@kernel.org Signed-off-by: Dmitry Osipenko digetx@gmail.com --- .../bindings/display/tegra/nvidia,tegra20-host1x.txt | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 62861a8fb5c6..e61999ce54e9 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -19,6 +19,7 @@ Required properties: See ../reset/reset.txt for details. - reset-names: Must include the following entries: - host1x + - mc

Optional properties: - operating-points-v2: See ../bindings/opp/opp.txt for details. @@ -198,6 +199,7 @@ of the following host1x client modules: See ../reset/reset.txt for details. - reset-names: Must include the following entries: - 2d + - mc

Optional properties: - interconnects: Must contain entry for the GR2D memory clients. @@ -224,6 +226,8 @@ of the following host1x client modules: - reset-names: Must include the following entries: - 3d - 3d2 (Only required on SoCs with two 3D clocks) + - mc + - mc2 (Only required on SoCs with two 3D clocks)

Optional properties: - interconnects: Must contain entry for the GR3D memory clients.

Add host1x_channel_stop() which waits till channel becomes idle and then stops the channel hardware. This is needed for supporting suspend/resume by host1x drivers since the hardware state is lost after power-gating, thus the channel needs to be stopped before client enters into suspend.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/gpu/host1x/channel.c | 8 ++++++++ include/linux/host1x.h | 1 + 2 files changed, 9 insertions(+)

diff --git a/drivers/gpu/host1x/channel.c b/drivers/gpu/host1x/channel.c index 4cd212bb570d..2a9a3a8d5931 100644 --- a/drivers/gpu/host1x/channel.c +++ b/drivers/gpu/host1x/channel.c @@ -75,6 +75,14 @@ struct host1x_channel *host1x_channel_get_index(struct host1x *host, return ch; }

+void host1x_channel_stop(struct host1x_channel *channel) +{ + struct host1x *host = dev_get_drvdata(channel->dev->parent); + + host1x_hw_cdma_stop(host, &channel->cdma); +} +EXPORT_SYMBOL(host1x_channel_stop); + static void release_channel(struct kref *kref) { struct host1x_channel *channel = diff --git a/include/linux/host1x.h b/include/linux/host1x.h index 7bccf589aba7..66473b5be0af 100644 --- a/include/linux/host1x.h +++ b/include/linux/host1x.h @@ -181,6 +181,7 @@ struct host1x_job;

struct host1x_channel *host1x_channel_request(struct host1x_client *client); struct host1x_channel *host1x_channel_get(struct host1x_channel *channel); +void host1x_channel_stop(struct host1x_channel *channel); void host1x_channel_put(struct host1x_channel *channel); int host1x_job_submit(struct host1x_job *job);

The HDMI on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now HDMI driver must use OPP API for driving the controller's clock rate because OPP API takes care of reconfiguring the domain's performance state based on HDMI clock rate. Add OPP support to the HDMI driver.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/gpu/drm/tegra/hdmi.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c index e5d2a4026028..9a87d351a828 100644 --- a/drivers/gpu/drm/tegra/hdmi.c +++ b/drivers/gpu/drm/tegra/hdmi.c @@ -11,10 +11,13 @@ #include <linux/math64.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/pm_opp.h> #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/reset.h>

+#include <soc/tegra/common.h> + #include <drm/drm_atomic_helper.h> #include <drm/drm_crtc.h> #include <drm/drm_debugfs.h> @@ -1195,7 +1198,7 @@ static void tegra_hdmi_encoder_enable(struct drm_encoder *encoder) h_back_porch = mode->htotal - mode->hsync_end; h_front_porch = mode->hsync_start - mode->hdisplay;

- err = clk_set_rate(hdmi->clk, hdmi->pixel_clock); + err = dev_pm_opp_set_rate(hdmi->dev, hdmi->pixel_clock); if (err < 0) { dev_err(hdmi->dev, "failed to set HDMI clock frequency: %d\n", err); @@ -1732,7 +1735,14 @@ static int tegra_hdmi_probe(struct platform_device *pdev) }

platform_set_drvdata(pdev, hdmi); - pm_runtime_enable(&pdev->dev); + + err = devm_pm_runtime_enable(&pdev->dev); + if (err) + return err; + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + return err;

INIT_LIST_HEAD(&hdmi->client.list); hdmi->client.ops = &hdmi_client_ops; @@ -1753,8 +1763,6 @@ static int tegra_hdmi_remove(struct platform_device *pdev) struct tegra_hdmi *hdmi = platform_get_drvdata(pdev); int err;

- pm_runtime_disable(&pdev->dev); - err = host1x_client_unregister(&hdmi->client); if (err < 0) { dev_err(&pdev->dev, "failed to unregister host1x client: %d\n",

Add runtime power management and support generic power domains.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/gpu/drm/tegra/gr3d.c | 388 ++++++++++++++++++++++++++++++----- 1 file changed, 332 insertions(+), 56 deletions(-)

diff --git a/drivers/gpu/drm/tegra/gr3d.c b/drivers/gpu/drm/tegra/gr3d.c index 24442ade0da3..5879402ae55e 100644 --- a/drivers/gpu/drm/tegra/gr3d.c +++ b/drivers/gpu/drm/tegra/gr3d.c @@ -5,32 +5,47 @@ */

#include <linux/clk.h> +#include <linux/delay.h> #include <linux/host1x.h> #include <linux/iommu.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_opp.h> +#include <linux/pm_runtime.h> #include <linux/reset.h>

+#include <soc/tegra/common.h> #include <soc/tegra/pmc.h>

#include "drm.h" #include "gem.h" #include "gr3d.h"

+enum { + RST_MC, + RST_GR3D, + RST_MC2, + RST_GR3D2, + RST_GR3D_MAX, +}; + struct gr3d_soc { unsigned int version; + unsigned int num_clocks; + unsigned int num_resets; };

struct gr3d { struct tegra_drm_client client; struct host1x_channel *channel; - struct clk *clk_secondary; - struct clk *clk; - struct reset_control *rst_secondary; - struct reset_control *rst;

const struct gr3d_soc *soc; + struct clk_bulk_data *clocks; + unsigned int nclocks; + struct reset_control_bulk_data resets[RST_GR3D_MAX]; + unsigned int nresets;

DECLARE_BITMAP(addr_regs, GR3D_NUM_REGS); }; @@ -109,16 +124,24 @@ static int gr3d_open_channel(struct tegra_drm_client *client, struct tegra_drm_context *context) { struct gr3d *gr3d = to_gr3d(client); + int err;

context->channel = host1x_channel_get(gr3d->channel); if (!context->channel) return -ENOMEM;

+ err = pm_runtime_resume_and_get(client->base.dev); + if (err) { + host1x_channel_put(context->channel); + return err; + } + return 0; }

static void gr3d_close_channel(struct tegra_drm_context *context) { + pm_runtime_put_sync(context->client->base.dev); host1x_channel_put(context->channel); }

@@ -155,14 +178,20 @@ static const struct tegra_drm_client_ops gr3d_ops = {

static const struct gr3d_soc tegra20_gr3d_soc = { .version = 0x20, + .num_clocks = 1, + .num_resets = 2, };

static const struct gr3d_soc tegra30_gr3d_soc = { .version = 0x30, + .num_clocks = 2, + .num_resets = 4, };

static const struct gr3d_soc tegra114_gr3d_soc = { .version = 0x35, + .num_clocks = 1, + .num_resets = 2, };

static const struct of_device_id tegra_gr3d_match[] = { @@ -278,69 +307,240 @@ static const u32 gr3d_addr_regs[] = { GR3D_GLOBAL_SAMP23SURFADDR(15), };

-static int gr3d_probe(struct platform_device *pdev) +static int gr3d_power_up_legacy_domain(struct device *dev, const char *name, + unsigned int id) { - struct device_node *np = pdev->dev.of_node; - struct host1x_syncpt **syncpts; - struct gr3d *gr3d; + struct gr3d *gr3d = dev_get_drvdata(dev); + struct reset_control *reset; + struct clk *clk; unsigned int i; int err;

- gr3d = devm_kzalloc(&pdev->dev, sizeof(*gr3d), GFP_KERNEL); - if (!gr3d) - return -ENOMEM; - - gr3d->soc = of_device_get_match_data(&pdev->dev); + /* + * Tegra20 device-tree doesn't specify 3d clock name and there is only + * one clock for Tegra20. Tegra30+ device-trees always specified names + * for the clocks. + */ + if (gr3d->nclocks == 1) { + if (id == TEGRA_POWERGATE_3D1) + return 0; + + clk = gr3d->clocks[0].clk; + } else { + for (i = 0; i < gr3d->nclocks; i++) { + if (WARN_ON(!gr3d->clocks[i].id)) + continue; + + if (!strcmp(gr3d->clocks[i].id, name)) { + clk = gr3d->clocks[i].clk; + break; + } + }

- syncpts = devm_kzalloc(&pdev->dev, sizeof(*syncpts), GFP_KERNEL); - if (!syncpts) - return -ENOMEM; + if (WARN_ON(i == gr3d->nclocks)) + return -EINVAL; + }

- gr3d->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(gr3d->clk)) { - dev_err(&pdev->dev, "cannot get clock\n"); - return PTR_ERR(gr3d->clk); + /* + * We use array of resets, which includes MC resets, and MC + * reset shouldn't be asserted while hardware is gated because + * MC flushing will fail for gated hardware. Hence for legacy + * PD we request the individual reset separately. + */ + reset = reset_control_get_exclusive_released(dev, name); + if (IS_ERR(reset)) + return PTR_ERR(reset); + + err = reset_control_acquire(reset); + if (err) { + dev_err(dev, "failed to acquire %s reset: %d\n", name, err); + } else { + err = tegra_powergate_sequence_power_up(id, clk, reset); + reset_control_release(reset); }

- gr3d->rst = devm_reset_control_get(&pdev->dev, "3d"); - if (IS_ERR(gr3d->rst)) { - dev_err(&pdev->dev, "cannot get reset\n"); - return PTR_ERR(gr3d->rst); + reset_control_put(reset); + if (err) + return err; + + /* + * tegra_powergate_sequence_power_up() leaves clocks enabled + * while GENPD not, hence keep clock-enable balanced. + */ + clk_disable_unprepare(clk); + + return 0; +} + +static void gr3d_del_link(void *link) +{ + device_link_del(link); +} + +static int gr3d_init_power(struct device *dev, struct gr3d *gr3d) +{ + static const char * const opp_genpd_names[] = { "3d0", "3d1", NULL }; + const u32 link_flags = DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME; + struct device **opp_virt_devs, *pd_dev; + struct device_link *link; + unsigned int i; + int err; + + err = of_count_phandle_with_args(dev->of_node, "power-domains", + "#power-domain-cells"); + if (err < 0) { + if (err != -ENOENT) + return err; + + /* + * Older device-trees don't use GENPD. In this case we should + * toggle power domain manually. + */ + err = gr3d_power_up_legacy_domain(dev, "3d", + TEGRA_POWERGATE_3D); + if (err) + return err; + + err = gr3d_power_up_legacy_domain(dev, "3d2", + TEGRA_POWERGATE_3D1); + if (err) + return err; + + return 0; }

- if (of_device_is_compatible(np, "nvidia,tegra30-gr3d")) { - gr3d->clk_secondary = devm_clk_get(&pdev->dev, "3d2"); - if (IS_ERR(gr3d->clk_secondary)) { - dev_err(&pdev->dev, "cannot get secondary clock\n"); - return PTR_ERR(gr3d->clk_secondary); + /* + * The PM domain core automatically attaches a single power domain, + * otherwise it skips attaching completely. We have a single domain + * on Tegra20 and two domains on Tegra30+. + */ + if (dev->pm_domain) + return 0; + + err = devm_pm_opp_attach_genpd(dev, opp_genpd_names, &opp_virt_devs); + if (err) + return err; + + for (i = 0; opp_genpd_names[i]; i++) { + pd_dev = opp_virt_devs[i]; + if (!pd_dev) { + dev_err(dev, "failed to get %s power domain\n", + opp_genpd_names[i]); + return -EINVAL; }

- gr3d->rst_secondary = devm_reset_control_get(&pdev->dev, - "3d2"); - if (IS_ERR(gr3d->rst_secondary)) { - dev_err(&pdev->dev, "cannot get secondary reset\n"); - return PTR_ERR(gr3d->rst_secondary); + link = device_link_add(dev, pd_dev, link_flags); + if (!link) { + dev_err(dev, "failed to link to %s\n", dev_name(pd_dev)); + return -EINVAL; } + + err = devm_add_action_or_reset(dev, gr3d_del_link, link); + if (err) + return err; }

- err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D, gr3d->clk, - gr3d->rst); + return 0; +} + +static int gr3d_set_opp(struct dev_pm_set_opp_data *data) +{ + struct gr3d *gr3d = dev_get_drvdata(data->dev); + unsigned int i; + int err; + + for (i = 0; i < gr3d->nclocks; i++) { + err = clk_set_rate(gr3d->clocks[i].clk, data->new_opp.rate); + if (err) { + dev_err(data->dev, "failed to set %s rate to %lu: %d\n", + gr3d->clocks[i].id, data->new_opp.rate, err); + goto restore; + } + } + + return 0; + +restore: + while (i--) + clk_set_rate(gr3d->clocks[i].clk, data->old_opp.rate); + + return err; +} + +static int gr3d_get_clocks(struct device *dev, struct gr3d *gr3d) +{ + int err; + + err = devm_clk_bulk_get_all(dev, &gr3d->clocks); if (err < 0) { - dev_err(&pdev->dev, "failed to power up 3D unit\n"); + dev_err(dev, "failed to get clock: %d\n", err); return err; } + gr3d->nclocks = err;

- if (gr3d->clk_secondary) { - err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D1, - gr3d->clk_secondary, - gr3d->rst_secondary); - if (err < 0) { - dev_err(&pdev->dev, - "failed to power up secondary 3D unit\n"); - return err; - } + if (gr3d->nclocks != gr3d->soc->num_clocks) { + dev_err(dev, "invalid number of clocks: %u\n", gr3d->nclocks); + return -ENOENT; }

+ return 0; +} + +static int gr3d_get_resets(struct device *dev, struct gr3d *gr3d) +{ + int err; + + gr3d->resets[RST_MC].id = "mc"; + gr3d->resets[RST_MC2].id = "mc2"; + gr3d->resets[RST_GR3D].id = "3d"; + gr3d->resets[RST_GR3D2].id = "3d2"; + gr3d->nresets = gr3d->soc->num_resets; + + err = devm_reset_control_bulk_get_optional_exclusive_released( + dev, gr3d->nresets, gr3d->resets); + if (err) { + dev_err(dev, "failed to get reset: %d\n", err); + return err; + } + + if (WARN_ON(!gr3d->resets[RST_GR3D].rstc) || + WARN_ON(!gr3d->resets[RST_GR3D2].rstc && gr3d->nresets == 4)) + return -ENOENT; + + return 0; +} + +static int gr3d_probe(struct platform_device *pdev) +{ + struct host1x_syncpt **syncpts; + struct gr3d *gr3d; + unsigned int i; + int err; + + gr3d = devm_kzalloc(&pdev->dev, sizeof(*gr3d), GFP_KERNEL); + if (!gr3d) + return -ENOMEM; + + platform_set_drvdata(pdev, gr3d); + + gr3d->soc = of_device_get_match_data(&pdev->dev); + + syncpts = devm_kzalloc(&pdev->dev, sizeof(*syncpts), GFP_KERNEL); + if (!syncpts) + return -ENOMEM; + + err = gr3d_get_clocks(&pdev->dev, gr3d); + if (err) + return err; + + err = gr3d_get_resets(&pdev->dev, gr3d); + if (err) + return err; + + err = gr3d_init_power(&pdev->dev, gr3d); + if (err) + return err; + INIT_LIST_HEAD(&gr3d->client.base.list); gr3d->client.base.ops = &gr3d_client_ops; gr3d->client.base.dev = &pdev->dev; @@ -352,20 +552,36 @@ static int gr3d_probe(struct platform_device *pdev) gr3d->client.version = gr3d->soc->version; gr3d->client.ops = &gr3d_ops;

+ pm_runtime_enable(&pdev->dev); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 200); + + err = devm_pm_opp_register_set_opp_helper(&pdev->dev, gr3d_set_opp); + if (err) + goto disable_rpm; + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + goto disable_rpm; + err = host1x_client_register(&gr3d->client.base); if (err < 0) { dev_err(&pdev->dev, "failed to register host1x client: %d\n", err); - return err; + goto disable_rpm; }

/* initialize address register map */ for (i = 0; i < ARRAY_SIZE(gr3d_addr_regs); i++) set_bit(gr3d_addr_regs[i], gr3d->addr_regs);

- platform_set_drvdata(pdev, gr3d); - return 0; + +disable_rpm: + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return err; }

static int gr3d_remove(struct platform_device *pdev) @@ -380,23 +596,83 @@ static int gr3d_remove(struct platform_device *pdev) return err; }

- if (gr3d->clk_secondary) { - reset_control_assert(gr3d->rst_secondary); - tegra_powergate_power_off(TEGRA_POWERGATE_3D1); - clk_disable_unprepare(gr3d->clk_secondary); + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static int __maybe_unused gr3d_runtime_suspend(struct device *dev) +{ + struct gr3d *gr3d = dev_get_drvdata(dev); + int err; + + host1x_channel_stop(gr3d->channel); + + err = reset_control_bulk_assert(gr3d->nresets, gr3d->resets); + if (err) { + dev_err(dev, "failed to assert reset: %d\n", err); + return err; + } + + usleep_range(10, 20); + + /* + * Older device-trees don't specify MC resets and power-gating can't + * be done safely in that case. Hence we will keep the power ungated + * for older DTBs. For newer DTBs, GENPD will perform the power-gating. + */ + + clk_bulk_disable_unprepare(gr3d->nclocks, gr3d->clocks); + reset_control_bulk_release(gr3d->nresets, gr3d->resets); + + return 0; +} + +static int __maybe_unused gr3d_runtime_resume(struct device *dev) +{ + struct gr3d *gr3d = dev_get_drvdata(dev); + int err; + + err = reset_control_bulk_acquire(gr3d->nresets, gr3d->resets); + if (err) { + dev_err(dev, "failed to acquire reset: %d\n", err); + return err; + } + + err = clk_bulk_prepare_enable(gr3d->nclocks, gr3d->clocks); + if (err) { + dev_err(dev, "failed to enable clock: %d\n", err); + goto release_reset; }

- reset_control_assert(gr3d->rst); - tegra_powergate_power_off(TEGRA_POWERGATE_3D); - clk_disable_unprepare(gr3d->clk); + err = reset_control_bulk_deassert(gr3d->nresets, gr3d->resets); + if (err) { + dev_err(dev, "failed to deassert reset: %d\n", err); + goto disable_clk; + }

return 0; + +disable_clk: + clk_bulk_disable_unprepare(gr3d->nclocks, gr3d->clocks); +release_reset: + reset_control_bulk_release(gr3d->nresets, gr3d->resets); + + return err; }

+static const struct dev_pm_ops tegra_gr3d_pm = { + SET_RUNTIME_PM_OPS(gr3d_runtime_suspend, gr3d_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + struct platform_driver tegra_gr3d_driver = { .driver = { .name = "tegra-gr3d", .of_match_table = tegra_gr3d_match, + .pm = &tegra_gr3d_pm, }, .probe = gr3d_probe, .remove = gr3d_remove,

The Tegra USB controller belongs to the core power domain and we're going to enable GENPD support for the core domain. Now USB controller must be resumed using runtime PM API in order to initialize the USB power state. We already support runtime PM for the CI device, but CI's PM is separated from the RPM managed by tegra-usb driver. Add runtime PM and OPP support to the driver.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/usb/chipidea/ci_hdrc_tegra.c | 53 ++++++++++++++++++++++++---- 1 file changed, 46 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c index 60361141ac04..3142ef7ebe42 100644 --- a/drivers/usb/chipidea/ci_hdrc_tegra.c +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c @@ -7,6 +7,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/pm_runtime.h> #include <linux/reset.h>

#include <linux/usb.h> @@ -15,6 +16,8 @@ #include <linux/usb/of.h> #include <linux/usb/phy.h>

+#include <soc/tegra/common.h> + #include "../host/ehci.h"

#include "ci.h" @@ -278,6 +281,8 @@ static int tegra_usb_probe(struct platform_device *pdev) if (!usb) return -ENOMEM;

+ platform_set_drvdata(pdev, usb); + soc = of_device_get_match_data(&pdev->dev); if (!soc) { dev_err(&pdev->dev, "failed to match OF data\n"); @@ -296,11 +301,17 @@ static int tegra_usb_probe(struct platform_device *pdev) return err; }

- err = clk_prepare_enable(usb->clk); - if (err < 0) { - dev_err(&pdev->dev, "failed to enable clock: %d\n", err); + err = devm_pm_runtime_enable(&pdev->dev); + if (err) + return err; + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + return err; + + err = pm_runtime_resume_and_get(&pdev->dev); + if (err) return err; - }

if (device_property_present(&pdev->dev, "nvidia,needs-double-reset")) usb->needs_double_reset = true; @@ -320,8 +331,6 @@ static int tegra_usb_probe(struct platform_device *pdev) if (err) goto fail_power_off;

- platform_set_drvdata(pdev, usb); - /* setup and register ChipIdea HDRC device */ usb->soc = soc; usb->data.name = "tegra-usb"; @@ -350,7 +359,8 @@ static int tegra_usb_probe(struct platform_device *pdev) phy_shutdown: usb_phy_shutdown(usb->phy); fail_power_off: - clk_disable_unprepare(usb->clk); + pm_runtime_put(&pdev->dev); + return err; }

@@ -360,15 +370,44 @@ static int tegra_usb_remove(struct platform_device *pdev)

ci_hdrc_remove_device(usb->dev); usb_phy_shutdown(usb->phy); + pm_runtime_put(&pdev->dev); + + return 0; +} + +static int __maybe_unused tegra_usb_runtime_resume(struct device *dev) +{ + struct tegra_usb *usb = dev_get_drvdata(dev); + int err; + + err = clk_prepare_enable(usb->clk); + if (err < 0) { + dev_err(dev, "failed to enable clock: %d\n", err); + return err; + } + + return 0; +} + +static int __maybe_unused tegra_usb_runtime_suspend(struct device *dev) +{ + struct tegra_usb *usb = dev_get_drvdata(dev); + clk_disable_unprepare(usb->clk);

return 0; }

+static const struct dev_pm_ops tegra_usb_pm = { + SET_RUNTIME_PM_OPS(tegra_usb_runtime_suspend, tegra_usb_runtime_resume, + NULL) +}; + static struct platform_driver tegra_usb_driver = { .driver = { .name = "tegra-usb", .of_match_table = tegra_usb_of_match, + .pm = &tegra_usb_pm, }, .probe = tegra_usb_probe, .remove = tegra_usb_remove,

The PWM on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now PWM must be resumed using runtime PM API in order to initialize the PWM power state. The PWM clock rate must be changed using OPP API that will reconfigure the power domain performance state in accordance to the rate. Add runtime PM and OPP support to the PWM driver.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/pwm/pwm-tegra.c | 88 ++++++++++++++++++++++++++++++++--------- 1 file changed, 70 insertions(+), 18 deletions(-)

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 11a10b575ace..afb5ecde007e 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -42,12 +42,16 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pm_opp.h> #include <linux/pwm.h> #include <linux/platform_device.h> #include <linux/pinctrl/consumer.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/reset.h>

+#include <soc/tegra/common.h> + #define PWM_ENABLE (1 << 31) #define PWM_DUTY_WIDTH 8 #define PWM_DUTY_SHIFT 16 @@ -145,7 +149,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, required_clk_rate = (NSEC_PER_SEC / period_ns) << PWM_DUTY_WIDTH;

- err = clk_set_rate(pc->clk, required_clk_rate); + err = dev_pm_opp_set_rate(pc->dev, required_clk_rate); if (err < 0) return -EINVAL;

@@ -181,8 +185,8 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, * before writing the register. Otherwise, keep it enabled. */ if (!pwm_is_enabled(pwm)) { - err = clk_prepare_enable(pc->clk); - if (err < 0) + err = pm_runtime_resume_and_get(pc->dev); + if (err) return err; } else val |= PWM_ENABLE; @@ -193,7 +197,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, * If the PWM is not enabled, turn the clock off again to save power. */ if (!pwm_is_enabled(pwm)) - clk_disable_unprepare(pc->clk); + pm_runtime_put(pc->dev);

return 0; } @@ -204,8 +208,8 @@ static int tegra_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) int rc = 0; u32 val;

- rc = clk_prepare_enable(pc->clk); - if (rc < 0) + rc = pm_runtime_resume_and_get(pc->dev); + if (rc) return rc;

val = pwm_readl(pc, pwm->hwpwm); @@ -224,7 +228,7 @@ static void tegra_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) val &= ~PWM_ENABLE; pwm_writel(pc, pwm->hwpwm, val);

- clk_disable_unprepare(pc->clk); + pm_runtime_put_sync(pc->dev); }

static const struct pwm_ops tegra_pwm_ops = { @@ -256,11 +260,23 @@ static int tegra_pwm_probe(struct platform_device *pdev) if (IS_ERR(pwm->clk)) return PTR_ERR(pwm->clk);

+ ret = devm_pm_runtime_enable(&pdev->dev); + if (ret) + return ret; + + ret = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (ret) + return ret; + + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret) + return ret; + /* Set maximum frequency of the IP */ - ret = clk_set_rate(pwm->clk, pwm->soc->max_frequency); + ret = dev_pm_opp_set_rate(pwm->dev, pwm->soc->max_frequency); if (ret < 0) { dev_err(&pdev->dev, "Failed to set max frequency: %d\n", ret); - return ret; + goto put_pm; }

/* @@ -278,7 +294,7 @@ static int tegra_pwm_probe(struct platform_device *pdev) if (IS_ERR(pwm->rst)) { ret = PTR_ERR(pwm->rst); dev_err(&pdev->dev, "Reset control is not found: %d\n", ret); - return ret; + goto put_pm; }

reset_control_deassert(pwm->rst); @@ -291,34 +307,67 @@ static int tegra_pwm_probe(struct platform_device *pdev) if (ret < 0) { dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); reset_control_assert(pwm->rst); - return ret; + goto put_pm; }

+ pm_runtime_put(&pdev->dev); + return 0; +put_pm: + pm_runtime_put(&pdev->dev); + return ret; }

static int tegra_pwm_remove(struct platform_device *pdev) { struct tegra_pwm_chip *pc = platform_get_drvdata(pdev); + int err;

pwmchip_remove(&pc->chip);

+ err = pm_runtime_resume_and_get(pc->dev); + if (err) + return err; + reset_control_assert(pc->rst); + pm_runtime_put(pc->dev);

return 0; }

-#ifdef CONFIG_PM_SLEEP -static int tegra_pwm_suspend(struct device *dev) +static int __maybe_unused tegra_pwm_runtime_suspend(struct device *dev) { - return pinctrl_pm_select_sleep_state(dev); + struct tegra_pwm_chip *pc = dev_get_drvdata(dev); + int err; + + clk_disable_unprepare(pc->clk); + + err = pinctrl_pm_select_sleep_state(dev); + if (err) { + clk_prepare_enable(pc->clk); + return err; + } + + return 0; }

-static int tegra_pwm_resume(struct device *dev) +static int __maybe_unused tegra_pwm_runtime_resume(struct device *dev) { - return pinctrl_pm_select_default_state(dev); + struct tegra_pwm_chip *pc = dev_get_drvdata(dev); + int err; + + err = pinctrl_pm_select_default_state(dev); + if (err) + return err; + + err = clk_prepare_enable(pc->clk); + if (err) { + pinctrl_pm_select_sleep_state(dev); + return err; + } + + return 0; } -#endif

static const struct tegra_pwm_soc tegra20_pwm_soc = { .num_channels = 4, @@ -344,7 +393,10 @@ static const struct of_device_id tegra_pwm_of_match[] = { MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);

static const struct dev_pm_ops tegra_pwm_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(tegra_pwm_suspend, tegra_pwm_resume) + SET_RUNTIME_PM_OPS(tegra_pwm_runtime_suspend, tegra_pwm_runtime_resume, + NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) };

static struct platform_driver tegra_pwm_driver = {

The NAND on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now NAND must be resumed using runtime PM API in order to initialize the NAND power state. Add runtime PM and OPP support to the NAND driver.

Acked-by: Miquel Raynal miquel.raynal@bootlin.com Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/mtd/nand/raw/tegra_nand.c | 55 ++++++++++++++++++++++++++----- 1 file changed, 47 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c index 32431bbe69b8..098fcc9cb9df 100644 --- a/drivers/mtd/nand/raw/tegra_nand.c +++ b/drivers/mtd/nand/raw/tegra_nand.c @@ -17,8 +17,11 @@ #include <linux/mtd/rawnand.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/reset.h>

+#include <soc/tegra/common.h> + #define COMMAND 0x00 #define COMMAND_GO BIT(31) #define COMMAND_CLE BIT(30) @@ -1151,6 +1154,7 @@ static int tegra_nand_probe(struct platform_device *pdev) return -ENOMEM;

ctrl->dev = &pdev->dev; + platform_set_drvdata(pdev, ctrl); nand_controller_init(&ctrl->controller); ctrl->controller.ops = &tegra_nand_controller_ops;

@@ -1166,14 +1170,22 @@ static int tegra_nand_probe(struct platform_device *pdev) if (IS_ERR(ctrl->clk)) return PTR_ERR(ctrl->clk);

- err = clk_prepare_enable(ctrl->clk); + err = devm_pm_runtime_enable(&pdev->dev); + if (err) + return err; + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + return err; + + err = pm_runtime_resume_and_get(&pdev->dev); if (err) return err;

err = reset_control_reset(rst); if (err) { dev_err(ctrl->dev, "Failed to reset HW: %d\n", err); - goto err_disable_clk; + goto err_put_pm; }

writel_relaxed(HWSTATUS_CMD_DEFAULT, ctrl->regs + HWSTATUS_CMD); @@ -1188,21 +1200,19 @@ static int tegra_nand_probe(struct platform_device *pdev) dev_name(&pdev->dev), ctrl); if (err) { dev_err(ctrl->dev, "Failed to get IRQ: %d\n", err); - goto err_disable_clk; + goto err_put_pm; }

writel_relaxed(DMA_MST_CTRL_IS_DONE, ctrl->regs + DMA_MST_CTRL);

err = tegra_nand_chips_init(ctrl->dev, ctrl); if (err) - goto err_disable_clk; - - platform_set_drvdata(pdev, ctrl); + goto err_put_pm;

return 0;

-err_disable_clk: - clk_disable_unprepare(ctrl->clk); +err_put_pm: + pm_runtime_put(ctrl->dev); return err; }

@@ -1219,11 +1229,39 @@ static int tegra_nand_remove(struct platform_device *pdev)

nand_cleanup(chip);

+ pm_runtime_put(ctrl->dev); + + return 0; +} + +static int __maybe_unused tegra_nand_runtime_resume(struct device *dev) +{ + struct tegra_nand_controller *ctrl = dev_get_drvdata(dev); + int err; + + err = clk_prepare_enable(ctrl->clk); + if (err) { + dev_err(dev, "Failed to enable clock: %d\n", err); + return err; + } + + return 0; +} + +static int __maybe_unused tegra_nand_runtime_suspend(struct device *dev) +{ + struct tegra_nand_controller *ctrl = dev_get_drvdata(dev); + clk_disable_unprepare(ctrl->clk);

return 0; }

+static const struct dev_pm_ops tegra_nand_pm = { + SET_RUNTIME_PM_OPS(tegra_nand_runtime_suspend, tegra_nand_runtime_resume, + NULL) +}; + static const struct of_device_id tegra_nand_of_match[] = { { .compatible = "nvidia,tegra20-nand" }, { /* sentinel */ } @@ -1234,6 +1272,7 @@ static struct platform_driver tegra_nand_driver = { .driver = { .name = "tegra-nand", .of_match_table = tegra_nand_of_match, + .pm = &tegra_nand_pm, }, .probe = tegra_nand_probe, .remove = tegra_nand_remove,

Convert NVIDIA Tegra video decoder binding to schema.

Reviewed-by: Rob Herring robh@kernel.org Acked-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Dmitry Osipenko digetx@gmail.com --- .../bindings/media/nvidia,tegra-vde.txt | 64 ----------- .../bindings/media/nvidia,tegra-vde.yaml | 107 ++++++++++++++++++ 2 files changed, 107 insertions(+), 64 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt create mode 100644 Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml

diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt deleted file mode 100644 index 602169b8aa19..000000000000 --- a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt +++ /dev/null @@ -1,64 +0,0 @@ -NVIDIA Tegra Video Decoder Engine - -Required properties: -- compatible : Must contain one of the following values: - - "nvidia,tegra20-vde" - - "nvidia,tegra30-vde" - - "nvidia,tegra114-vde" - - "nvidia,tegra124-vde" - - "nvidia,tegra132-vde" -- reg : Must contain an entry for each entry in reg-names. -- reg-names : Must include the following entries: - - sxe - - bsev - - mbe - - ppe - - mce - - tfe - - ppb - - vdma - - frameid -- iram : Must contain phandle to the mmio-sram device node that represents - IRAM region used by VDE. -- interrupts : Must contain an entry for each entry in interrupt-names. -- interrupt-names : Must include the following entries: - - sync-token - - bsev - - sxe -- clocks : Must include the following entries: - - vde -- resets : Must contain an entry for each entry in reset-names. -- reset-names : Should include the following entries: - - vde - -Optional properties: -- resets : Must contain an entry for each entry in reset-names. -- reset-names : Must include the following entries: - - mc -- iommus: Must contain phandle to the IOMMU device node. - -Example: - -video-codec@6001a000 { - compatible = "nvidia,tegra20-vde"; - reg = <0x6001a000 0x1000 /* Syntax Engine */ - 0x6001b000 0x1000 /* Video Bitstream Engine */ - 0x6001c000 0x100 /* Macroblock Engine */ - 0x6001c200 0x100 /* Post-processing Engine */ - 0x6001c400 0x100 /* Motion Compensation Engine */ - 0x6001c600 0x100 /* Transform Engine */ - 0x6001c800 0x100 /* Pixel prediction block */ - 0x6001ca00 0x100 /* Video DMA */ - 0x6001d800 0x300 /* Video frame controls */>; - reg-names = "sxe", "bsev", "mbe", "ppe", "mce", - "tfe", "ppb", "vdma", "frameid"; - iram = <&vde_pool>; /* IRAM region */ - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */ - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */ - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ - interrupt-names = "sync-token", "bsev", "sxe"; - clocks = <&tegra_car TEGRA20_CLK_VDE>; - reset-names = "vde", "mc"; - resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>; - iommus = <&mc TEGRA_SWGROUP_VDE>; -}; diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml new file mode 100644 index 000000000000..3b6c1f031e04 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nvidia,tegra-vde.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Video Decoder Engine + +maintainers: + - Dmitry Osipenko digetx@gmail.com + - Jon Hunter jonathanh@nvidia.com + - Thierry Reding thierry.reding@gmail.com + +properties: + compatible: + oneOf: + - items: + - enum: + - nvidia,tegra132-vde + - nvidia,tegra124-vde + - nvidia,tegra114-vde + - nvidia,tegra30-vde + - enum: + - nvidia,tegra20-vde + - items: + - const: nvidia,tegra20-vde + + reg: + maxItems: 9 + + reg-names: + items: + - const: sxe + - const: bsev + - const: mbe + - const: ppe + - const: mce + - const: tfe + - const: ppb + - const: vdma + - const: frameid + + clocks: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: vde + - const: mc + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: sync-token + - const: bsev + - const: sxe + + iommus: + maxItems: 1 + + iram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of the SRAM MMIO node. + +required: + - compatible + - reg + - reg-names + - clocks + - resets + - reset-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + video-codec@6001a000 { + compatible = "nvidia,tegra20-vde"; + reg = <0x6001a000 0x1000>, /* Syntax Engine */ + <0x6001b000 0x1000>, /* Video Bitstream Engine */ + <0x6001c000 0x100>, /* Macroblock Engine */ + <0x6001c200 0x100>, /* Post-processing Engine */ + <0x6001c400 0x100>, /* Motion Compensation Engine */ + <0x6001c600 0x100>, /* Transform Engine */ + <0x6001c800 0x100>, /* Pixel prediction block */ + <0x6001ca00 0x100>, /* Video DMA */ + <0x6001d800 0x300>; /* Video frame controls */ + reg-names = "sxe", "bsev", "mbe", "ppe", "mce", + "tfe", "ppb", "vdma", "frameid"; + iram = <&iram>; /* IRAM MMIO region */ + interrupts = <0 9 4>, /* Sync token */ + <0 10 4>, /* BSE-V */ + <0 12 4>; /* SXE */ + interrupt-names = "sync-token", "bsev", "sxe"; + clocks = <&clk 61>; + reset-names = "vde", "mc"; + resets = <&rst 61>, <&mem 13>; + iommus = <&mem 15>; + };

Currently driver supports legacy power domain API, this patch adds generic power domain support. This allows us to utilize a modern GENPD API for newer device-trees.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Acked-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/staging/media/tegra-vde/vde.c | 57 +++++++++++++++++++++------ 1 file changed, 46 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/media/tegra-vde/vde.c b/drivers/staging/media/tegra-vde/vde.c index ed4c1250b303..bb3079a2c0b5 100644 --- a/drivers/staging/media/tegra-vde/vde.c +++ b/drivers/staging/media/tegra-vde/vde.c @@ -20,6 +20,7 @@ #include <linux/slab.h> #include <linux/uaccess.h>

+#include <soc/tegra/common.h> #include <soc/tegra/pmc.h>

#include "uapi.h" @@ -920,13 +921,17 @@ static __maybe_unused int tegra_vde_runtime_suspend(struct device *dev) struct tegra_vde *vde = dev_get_drvdata(dev); int err;

- err = tegra_powergate_power_off(TEGRA_POWERGATE_VDEC); - if (err) { - dev_err(dev, "Failed to power down HW: %d\n", err); - return err; + if (!dev->pm_domain) { + err = tegra_powergate_power_off(TEGRA_POWERGATE_VDEC); + if (err) { + dev_err(dev, "Failed to power down HW: %d\n", err); + return err; + } }

clk_disable_unprepare(vde->clk); + reset_control_release(vde->rst); + reset_control_release(vde->rst_mc);

return 0; } @@ -936,14 +941,41 @@ static __maybe_unused int tegra_vde_runtime_resume(struct device *dev) struct tegra_vde *vde = dev_get_drvdata(dev); int err;

- err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_VDEC, - vde->clk, vde->rst); + err = reset_control_acquire(vde->rst_mc); if (err) { - dev_err(dev, "Failed to power up HW : %d\n", err); + dev_err(dev, "Failed to acquire mc reset: %d\n", err); return err; }

+ err = reset_control_acquire(vde->rst); + if (err) { + dev_err(dev, "Failed to acquire reset: %d\n", err); + goto release_mc_reset; + } + + if (!dev->pm_domain) { + err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_VDEC, + vde->clk, vde->rst); + if (err) { + dev_err(dev, "Failed to power up HW : %d\n", err); + goto release_reset; + } + } + + err = clk_prepare_enable(vde->clk); + if (err) { + dev_err(dev, "Failed to enable clock: %d\n", err); + goto release_reset; + } + return 0; + +release_reset: + reset_control_release(vde->rst); +release_mc_reset: + reset_control_release(vde->rst_mc); + + return err; }

static int tegra_vde_probe(struct platform_device *pdev) @@ -1001,14 +1033,14 @@ static int tegra_vde_probe(struct platform_device *pdev) return err; }

- vde->rst = devm_reset_control_get(dev, NULL); + vde->rst = devm_reset_control_get_exclusive_released(dev, NULL); if (IS_ERR(vde->rst)) { err = PTR_ERR(vde->rst); dev_err(dev, "Could not get VDE reset %d\n", err); return err; }

- vde->rst_mc = devm_reset_control_get_optional(dev, "mc"); + vde->rst_mc = devm_reset_control_get_optional_exclusive_released(dev, "mc"); if (IS_ERR(vde->rst_mc)) { err = PTR_ERR(vde->rst_mc); dev_err(dev, "Could not get MC reset %d\n", err); @@ -1066,6 +1098,10 @@ static int tegra_vde_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(dev); pm_runtime_set_autosuspend_delay(dev, 300);

+ err = devm_tegra_core_dev_init_opp_table_common(dev); + if (err) + goto err_pm_runtime; + /* * VDE partition may be left ON after bootloader, hence let's * power-cycle it in order to put hardware into a predictable lower @@ -1133,8 +1169,7 @@ static void tegra_vde_shutdown(struct platform_device *pdev) * On some devices bootloader isn't ready to a power-gated VDE on * a warm-reboot, machine will hang in that case. */ - if (pm_runtime_status_suspended(&pdev->dev)) - tegra_vde_runtime_resume(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); }

static __maybe_unused int tegra_vde_pm_suspend(struct device *dev)

Use resource-managed helpers to make code cleaner and more correct, properly releasing all resources in case of driver probe error.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/soc/tegra/fuse/fuse-tegra.c | 32 ++++++++++++++------------ drivers/soc/tegra/fuse/fuse-tegra20.c | 33 ++++++++++++++++++++++++--- 2 files changed, 48 insertions(+), 17 deletions(-)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c index cc032729a143..fe4f935ce73a 100644 --- a/drivers/soc/tegra/fuse/fuse-tegra.c +++ b/drivers/soc/tegra/fuse/fuse-tegra.c @@ -182,6 +182,12 @@ static const struct nvmem_cell_info tegra_fuse_cells[] = { }, };

+static void tegra_fuse_restore(void *base) +{ + fuse->clk = NULL; + fuse->base = base; +} + static int tegra_fuse_probe(struct platform_device *pdev) { void __iomem *base = fuse->base; @@ -189,13 +195,16 @@ static int tegra_fuse_probe(struct platform_device *pdev) struct resource *res; int err;

+ err = devm_add_action(&pdev->dev, tegra_fuse_restore, base); + if (err) + return err; + /* take over the memory region from the early initialization */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); fuse->phys = res->start; fuse->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(fuse->base)) { err = PTR_ERR(fuse->base); - fuse->base = base; return err; }

@@ -205,19 +214,20 @@ static int tegra_fuse_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to get FUSE clock: %ld", PTR_ERR(fuse->clk));

- fuse->base = base; return PTR_ERR(fuse->clk); }

platform_set_drvdata(pdev, fuse); fuse->dev = &pdev->dev;

- pm_runtime_enable(&pdev->dev); + err = devm_pm_runtime_enable(&pdev->dev); + if (err) + return err;

if (fuse->soc->probe) { err = fuse->soc->probe(fuse); if (err < 0) - goto restore; + return err; }

memset(&nvmem, 0, sizeof(nvmem)); @@ -241,7 +251,7 @@ static int tegra_fuse_probe(struct platform_device *pdev) err = PTR_ERR(fuse->nvmem); dev_err(&pdev->dev, "failed to register NVMEM device: %d\n", err); - goto restore; + return err; }

fuse->rst = devm_reset_control_get_optional(&pdev->dev, "fuse"); @@ -249,7 +259,7 @@ static int tegra_fuse_probe(struct platform_device *pdev) err = PTR_ERR(fuse->rst); dev_err(&pdev->dev, "failed to get FUSE reset: %pe\n", fuse->rst); - goto restore; + return err; }

/* @@ -258,26 +268,20 @@ static int tegra_fuse_probe(struct platform_device *pdev) */ err = pm_runtime_resume_and_get(&pdev->dev); if (err) - goto restore; + return err;

err = reset_control_reset(fuse->rst); pm_runtime_put(&pdev->dev);

if (err < 0) { dev_err(&pdev->dev, "failed to reset FUSE: %d\n", err); - goto restore; + return err; }

/* release the early I/O memory mapping */ iounmap(base);

return 0; - -restore: - fuse->clk = NULL; - fuse->base = base; - pm_runtime_disable(&pdev->dev); - return err; }

static int __maybe_unused tegra_fuse_runtime_resume(struct device *dev) diff --git a/drivers/soc/tegra/fuse/fuse-tegra20.c b/drivers/soc/tegra/fuse/fuse-tegra20.c index 8ec9fc5e5e4b..12503f563e36 100644 --- a/drivers/soc/tegra/fuse/fuse-tegra20.c +++ b/drivers/soc/tegra/fuse/fuse-tegra20.c @@ -94,9 +94,28 @@ static bool dma_filter(struct dma_chan *chan, void *filter_param) return of_device_is_compatible(np, "nvidia,tegra20-apbdma"); }

+static void tegra20_fuse_release_channel(void *data) +{ + struct tegra_fuse *fuse = data; + + dma_release_channel(fuse->apbdma.chan); + fuse->apbdma.chan = NULL; +} + +static void tegra20_fuse_free_coherent(void *data) +{ + struct tegra_fuse *fuse = data; + + dma_free_coherent(fuse->dev, sizeof(u32), fuse->apbdma.virt, + fuse->apbdma.phys); + fuse->apbdma.virt = NULL; + fuse->apbdma.phys = 0x0; +} + static int tegra20_fuse_probe(struct tegra_fuse *fuse) { dma_cap_mask_t mask; + int err;

dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); @@ -105,13 +124,21 @@ static int tegra20_fuse_probe(struct tegra_fuse *fuse) if (!fuse->apbdma.chan) return -EPROBE_DEFER;

+ err = devm_add_action_or_reset(fuse->dev, tegra20_fuse_release_channel, + fuse); + if (err) + return err; + fuse->apbdma.virt = dma_alloc_coherent(fuse->dev, sizeof(u32), &fuse->apbdma.phys, GFP_KERNEL); - if (!fuse->apbdma.virt) { - dma_release_channel(fuse->apbdma.chan); + if (!fuse->apbdma.virt) return -ENOMEM; - } + + err = devm_add_action_or_reset(fuse->dev, tegra20_fuse_free_coherent, + fuse); + if (err) + return err;

fuse->apbdma.config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; fuse->apbdma.config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;

Device-tree schema doesn't allow domain name to start with a number. We don't use 3d domain yet in device-trees, so rename it to the name used by Tegra TRMs: TD, TD2.

Reported-by: David Heidelberg david@ixit.cz Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/soc/tegra/pmc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index fb8faf7b226a..6759f19b9cd6 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -2964,7 +2964,7 @@ static SIMPLE_DEV_PM_OPS(tegra_pmc_pm_ops, tegra_pmc_suspend, tegra_pmc_resume);

static const char * const tegra20_powergates[] = { [TEGRA_POWERGATE_CPU] = "cpu", - [TEGRA_POWERGATE_3D] = "3d", + [TEGRA_POWERGATE_3D] = "td", [TEGRA_POWERGATE_VENC] = "venc", [TEGRA_POWERGATE_VDEC] = "vdec", [TEGRA_POWERGATE_PCIE] = "pcie", @@ -3072,7 +3072,7 @@ static const struct tegra_pmc_soc tegra20_pmc_soc = {

static const char * const tegra30_powergates[] = { [TEGRA_POWERGATE_CPU] = "cpu0", - [TEGRA_POWERGATE_3D] = "3d0", + [TEGRA_POWERGATE_3D] = "td", [TEGRA_POWERGATE_VENC] = "venc", [TEGRA_POWERGATE_VDEC] = "vdec", [TEGRA_POWERGATE_PCIE] = "pcie", @@ -3084,7 +3084,7 @@ static const char * const tegra30_powergates[] = { [TEGRA_POWERGATE_CPU2] = "cpu2", [TEGRA_POWERGATE_CPU3] = "cpu3", [TEGRA_POWERGATE_CELP] = "celp", - [TEGRA_POWERGATE_3D1] = "3d1", + [TEGRA_POWERGATE_3D1] = "td2", };

static const u8 tegra30_cpu_powergates[] = { @@ -3133,7 +3133,7 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = {

static const char * const tegra114_powergates[] = { [TEGRA_POWERGATE_CPU] = "crail", - [TEGRA_POWERGATE_3D] = "3d", + [TEGRA_POWERGATE_3D] = "td", [TEGRA_POWERGATE_VENC] = "venc", [TEGRA_POWERGATE_VDEC] = "vdec", [TEGRA_POWERGATE_MPE] = "mpe",

All device drivers got runtime PM and OPP support. Flip the core domain support status for Tegra20 and Tegra30 SoCs.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/soc/tegra/pmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 3e52ceada60c..7c7aff8120d4 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -3042,7 +3042,7 @@ static void tegra20_pmc_setup_irq_polarity(struct tegra_pmc *pmc, }

static const struct tegra_pmc_soc tegra20_pmc_soc = { - .supports_core_domain = false, + .supports_core_domain = true, .num_powergates = ARRAY_SIZE(tegra20_powergates), .powergates = tegra20_powergates, .num_cpu_powergates = 0, @@ -3103,7 +3103,7 @@ static const char * const tegra30_reset_sources[] = { };

static const struct tegra_pmc_soc tegra30_pmc_soc = { - .supports_core_domain = false, + .supports_core_domain = true, .num_powergates = ARRAY_SIZE(tegra30_powergates), .powergates = tegra30_powergates, .num_cpu_powergates = ARRAY_SIZE(tegra30_cpu_powergates),

Add OPP tables and power domains to all peripheral devices which support power management on Tegra30 SoC.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- .../tegra30-asus-nexus7-grouper-common.dtsi | 1 + arch/arm/boot/dts/tegra30-beaver.dts | 1 + arch/arm/boot/dts/tegra30-cardhu.dtsi | 1 + arch/arm/boot/dts/tegra30-colibri.dtsi | 17 +- arch/arm/boot/dts/tegra30-ouya.dts | 1 + .../arm/boot/dts/tegra30-peripherals-opp.dtsi | 1412 +++++++++++++++++ arch/arm/boot/dts/tegra30.dtsi | 153 ++ 7 files changed, 1583 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index 9732cd6f20b7..4f116c26f6ce 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -957,6 +957,7 @@ pmc@7000e400 { nvidia,core-pwr-off-time = <0>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; };

ahub@70080000 { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index e159feeedef7..b54cbb24c4d3 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1915,6 +1915,7 @@ pmc@7000e400 { nvidia,core-pwr-off-time = <0>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + core-supply = <&core_vdd_reg>; };

ahub@70080000 { diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 448f1397e64a..b2bba923eb93 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -391,6 +391,7 @@ pmc@7000e400 { nvidia,core-pwr-off-time = <0>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; };

ahub@70080000 { diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 413e35215804..0627b64f044d 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -765,9 +765,14 @@ vdd1_reg: vdd1 {

vddctrl_reg: vddctrl { regulator-name = "+V1.0_VDD_CPU"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-always-on; + + nvidia,tegra-cpu-regulator; };

reg_1v8_vio: vio { @@ -890,18 +895,23 @@ temp-sensor@4c { };

/* SW: +V1.2_VDD_CORE */ - regulator@60 { + vdd_core: regulator@60 { compatible = "ti,tps62362"; reg = <0x60>;

regulator-name = "tps62362-vout"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1400000>; + regulator-coupled-with = <&vddctrl_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-boot-on; regulator-always-on; ti,vsel0-state-low; /* VSEL1: EN_CORE_DVFS_N low for DVFS */ ti,vsel1-state-low; + + nvidia,tegra-core-regulator; }; };

@@ -914,6 +924,7 @@ pmc@7000e400 { nvidia,core-pwr-off-time = <0>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>;

/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */ i2c-thermtrip { diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index 90db5ff72537..2a79cd4662b1 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -274,6 +274,7 @@ pmc@7000e400 { nvidia,core-pwr-off-time = <458>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; };

mc_timings: memory-controller@7000f000 { diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi index 2c9780319725..e77f0be7ade3 100644 --- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi @@ -1,6 +1,56 @@ // SPDX-License-Identifier: GPL-2.0

/ { + core_opp_table: core-power-domain-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + core_opp_950: opp@950000 { + opp-microvolt = <950000 950000 1350000>; + opp-level = <950000>; + }; + + core_opp_1000: opp@1000000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-level = <1000000>; + }; + + core_opp_1050: opp@1050000 { + opp-microvolt = <1050000 1050000 1350000>; + opp-level = <1050000>; + }; + + core_opp_1100: opp@1100000 { + opp-microvolt = <1100000 1100000 1350000>; + opp-level = <1100000>; + }; + + core_opp_1150: opp@1150000 { + opp-microvolt = <1150000 1150000 1350000>; + opp-level = <1150000>; + }; + + core_opp_1200: opp@1200000 { + opp-microvolt = <1200000 1200000 1350000>; + opp-level = <1200000>; + }; + + core_opp_1250: opp@1250000 { + opp-microvolt = <1250000 1250000 1350000>; + opp-level = <1250000>; + }; + + core_opp_1300: opp@1300000 { + opp-microvolt = <1300000 1300000 1350000>; + opp-level = <1300000>; + }; + + core_opp_1350: opp@1350000 { + opp-microvolt = <1350000 1350000 1350000>; + opp-level = <1350000>; + }; + }; + emc_icc_dvfs_opp_table: emc-dvfs-opp-table { compatible = "operating-points-v2";

@@ -8,126 +58,147 @@ opp@12750000,950 { opp-microvolt = <950000 950000 1350000>; opp-hz = /bits/ 64 <12750000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_950>; };

opp@12750000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <12750000>; opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; };

opp@12750000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <12750000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@25500000,950 { opp-microvolt = <950000 950000 1350000>; opp-hz = /bits/ 64 <25500000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_950>; };

opp@25500000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <25500000>; opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; };

opp@25500000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <25500000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@27000000,950 { opp-microvolt = <950000 950000 1350000>; opp-hz = /bits/ 64 <27000000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_950>; };

opp@27000000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <27000000>; opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; };

opp@27000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <27000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@51000000,950 { opp-microvolt = <950000 950000 1350000>; opp-hz = /bits/ 64 <51000000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_950>; };

opp@51000000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <51000000>; opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; };

opp@51000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <51000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@54000000,950 { opp-microvolt = <950000 950000 1350000>; opp-hz = /bits/ 64 <54000000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_950>; };

opp@54000000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <54000000>; opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; };

opp@54000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <54000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@102000000,950 { opp-microvolt = <950000 950000 1350000>; opp-hz = /bits/ 64 <102000000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_950>; };

opp@102000000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <102000000>; opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; };

opp@102000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <102000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@108000000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <108000000>; opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; };

opp@108000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <108000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@204000000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; opp-suspend; };

@@ -135,6 +206,7 @@ opp@204000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; opp-suspend; };

@@ -142,126 +214,147 @@ opp@333500000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <333500000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1000>; };

opp@333500000,1200 { opp-microvolt = <1200000 1200000 1350000>; opp-hz = /bits/ 64 <333500000>; opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1200>; };

opp@333500000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <333500000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@375000000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <375000000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1000>; };

opp@375000000,1200 { opp-microvolt = <1200000 1200000 1350000>; opp-hz = /bits/ 64 <375000000>; opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1200>; };

opp@375000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <375000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@400000000,1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <400000000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1000>; };

opp@400000000,1200 { opp-microvolt = <1200000 1200000 1350000>; opp-hz = /bits/ 64 <400000000>; opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1200>; };

opp@400000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <400000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@416000000,1200 { opp-microvolt = <1200000 1200000 1350000>; opp-hz = /bits/ 64 <416000000>; opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1200>; };

opp@416000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <416000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@450000000,1200 { opp-microvolt = <1200000 1200000 1350000>; opp-hz = /bits/ 64 <450000000>; opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1200>; };

opp@450000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <450000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@533000000,1200 { opp-microvolt = <1200000 1200000 1350000>; opp-hz = /bits/ 64 <533000000>; opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1200>; };

opp@533000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <533000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@625000000,1200 { opp-microvolt = <1200000 1200000 1350000>; opp-hz = /bits/ 64 <625000000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1200>; };

opp@625000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <625000000>; opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; };

opp@667000000,1200 { opp-microvolt = <1200000 1200000 1350000>; opp-hz = /bits/ 64 <667000000>; opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1200>; };

opp@750000000,1300 { opp-microvolt = <1300000 1300000 1350000>; opp-hz = /bits/ 64 <750000000>; opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1300>; };

opp@800000000,1300 { opp-microvolt = <1300000 1300000 1350000>; opp-hz = /bits/ 64 <800000000>; opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1300>; };

opp@900000000,1350 { opp-microvolt = <1350000 1350000 1350000>; opp-hz = /bits/ 64 <900000000>; opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1350>; }; };

@@ -383,4 +476,1323 @@ opp@900000000 { opp-peak-kBps = <7200000>; }; }; + + gr2d_dvfs_opp_table: gr2d-opp-table { + compatible = "operating-points-v2"; + + opp@267000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <267000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; + }; + + opp@285000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1050>; + }; + + opp@304000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <304000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1050>; + }; + + opp@332000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <332000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1100>; + }; + + opp@361000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <361000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1100>; + }; + + opp@380000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <380000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1150>; + }; + + opp@408000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1150>; + }; + + opp@416000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1200>; + }; + + opp@446000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <446000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1200>; + }; + + opp@484000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <484000000>; + opp-supported-hw = <0x000C>; + required-opps = <&core_opp_1250>; + }; + + opp@520000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <520000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1300>; + }; + + opp@600000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1350>; + }; + }; + + gr3d_dvfs_opp_table: gr3d-opp-table { + compatible = "operating-points-v2"; + + opp@234000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <234000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1000>, <&core_opp_1000>; + }; + + opp@247000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <247000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1000>, <&core_opp_1000>; + }; + + opp@285000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1050>, <&core_opp_1050>; + }; + + opp@304000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <304000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1050>, <&core_opp_1050>; + }; + + opp@332000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <332000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1100>, <&core_opp_1100>; + }; + + opp@361000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <361000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1100>, <&core_opp_1100>; + }; + + opp@380000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <380000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1150>, <&core_opp_1150>; + }; + + opp@408000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1150>, <&core_opp_1150>; + }; + + opp@416000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1200>, <&core_opp_1200>; + }; + + opp@446000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <446000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1200>, <&core_opp_1200>; + }; + + opp@484000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <484000000>; + opp-supported-hw = <0x000C>; + required-opps = <&core_opp_1250>, <&core_opp_1250>; + }; + + opp@520000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <520000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1300>, <&core_opp_1300>; + }; + + opp@600000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1350>, <&core_opp_1350>; + }; + }; + + afi_dvfs_opp_table: afi-opp-table { + compatible = "operating-points-v2"; + + opp@250000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <250000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + cve_dvfs_opp_table: cve-opp-table { + compatible = "operating-points-v2"; + + opp@297000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <297000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + }; + + disp1_dvfs_opp_table: disp1-opp-table { + compatible = "operating-points-v2"; + + opp@120000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <120000000>; + opp-supported-hw = <0x0009>; + required-opps = <&core_opp_1000>; + }; + + opp@155000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <155000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1000>; + }; + + opp@190000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <190000000>; + opp-supported-hw = <0x0009>; + required-opps = <&core_opp_1200>; + }; + + opp@268000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <268000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1050>; + }; + }; + + disp2_dvfs_opp_table: disp2-opp-table { + compatible = "operating-points-v2"; + + opp@120000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <120000000>; + opp-supported-hw = <0x0009>; + required-opps = <&core_opp_1000>; + }; + + opp@155000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <155000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1000>; + }; + + opp@190000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <190000000>; + opp-supported-hw = <0x0009>; + required-opps = <&core_opp_1200>; + }; + + opp@268000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <268000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1050>; + }; + }; + + dsia_dvfs_opp_table: dsia-opp-table { + compatible = "operating-points-v2"; + + opp@275000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <275000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + dsib_dvfs_opp_table: dsib-opp-table { + compatible = "operating-points-v2"; + + opp@275000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <275000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + epp_dvfs_opp_table: epp-opp-table { + compatible = "operating-points-v2"; + + opp@267000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <267000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; + }; + + opp@285000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1050>; + }; + + opp@304000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <304000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1050>; + }; + + opp@332000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <332000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1100>; + }; + + opp@361000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <361000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1100>; + }; + + opp@380000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <380000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1150>; + }; + + opp@408000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1150>; + }; + + opp@416000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1200>; + }; + + opp@446000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <446000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1200>; + }; + + opp@484000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <484000000>; + opp-supported-hw = <0x000C>; + required-opps = <&core_opp_1250>; + }; + + opp@520000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <520000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1300>; + }; + + opp@600000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1350>; + }; + }; + + fuse_burn_dvfs_opp_table: fuse-burn-opp-table { + compatible = "operating-points-v2"; + + opp@26000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <26000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1150>; + }; + }; + + hdmi_dvfs_opp_table: hdmi-opp-table { + compatible = "operating-points-v2"; + + opp@148500000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <148500000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + host1x_dvfs_opp_table: host1x-opp-table { + compatible = "operating-points-v2"; + + opp@152000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <152000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; + }; + + opp@188000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <188000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1050>; + }; + + opp@222000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <222000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1100>; + }; + + opp@242000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <242000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; + }; + + opp@254000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <254000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1150>; + }; + + opp@267000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <267000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1200>; + }; + + opp@300000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1350>; + }; + }; + + mipi_dvfs_opp_table: mipi-opp-table { + compatible = "operating-points-v2"; + + opp@60000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <60000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1200>; + }; + }; + + mpe_dvfs_opp_table: mpe-opp-table { + compatible = "operating-points-v2"; + + opp@234000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <234000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1000>; + }; + + opp@247000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <247000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1000>; + }; + + opp@285000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1050>; + }; + + opp@304000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <304000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1050>; + }; + + opp@332000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <332000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1100>; + }; + + opp@361000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <361000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1100>; + }; + + opp@380000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <380000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1150>; + }; + + opp@408000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1150>; + }; + + opp@416000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1200>; + }; + + opp@446000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <446000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1200>; + }; + + opp@484000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <484000000>; + opp-supported-hw = <0x000C>; + required-opps = <&core_opp_1250>; + }; + + opp@520000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <520000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1300>; + }; + + opp@600000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1350>; + }; + }; + + sclk_dvfs_opp_table: sclk-opp-table { + compatible = "operating-points-v2"; + + opp@51000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <51000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_950>; + }; + + opp@136000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <136000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp@164000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <164000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp@191000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <191000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp@205000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <205000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1000>; + }; + + opp@216000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1150>; + }; + + opp@227000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <227000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1100>; + }; + + opp@267000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <267000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1200>; + }; + + opp@334000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <334000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1250>; + }; + + opp@378000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <378000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; + }; + }; + + se_dvfs_opp_table: se-opp-table { + compatible = "operating-points-v2"; + + opp@267000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <267000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; + }; + + opp@285000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1050>; + }; + + opp@304000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <304000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1050>; + }; + + opp@332000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <332000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1100>; + }; + + opp@361000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <361000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1100>; + }; + + opp@380000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <380000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1150>; + }; + + opp@408000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1150>; + }; + + opp@416000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1200>; + }; + + opp@446000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <446000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1200>; + }; + + opp@484000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <484000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1250>; + }; + + opp@520000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <520000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1300>; + }; + + opp@600000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1350>; + }; + + opp@625000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <625000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; + }; + }; + + ndflash_dvfs_opp_table: ndflash-opp-table { + compatible = "operating-points-v2"; + + opp@120000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <120000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@200000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <200000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1150>; + }; + }; + + nor_dvfs_opp_table: nor-opp-table { + compatible = "operating-points-v2"; + + opp@108000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <108000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; + }; + + opp@115000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <115000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; + }; + + opp@130000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <130000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1050>; + }; + + opp@133000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1150>; + }; + }; + + pcie_dvfs_opp_table: pcie-opp-table { + compatible = "operating-points-v2"; + + opp@250000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <250000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + pll_c_dvfs_opp_table: pllc-opp-table { + compatible = "operating-points-v2"; + + opp@533000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <533000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@667000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <667000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@800000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + + opp@1066000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <1066000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + + opp@1200000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <1200000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1350>; + }; + }; + + pll_e_dvfs_opp_table: plle-opp-table { + compatible = "operating-points-v2"; + + opp@100000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + pll_m_dvfs_opp_table: pllm-opp-table { + compatible = "operating-points-v2"; + + opp@533000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <533000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@667000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <667000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@800000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + + opp@1066000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <1066000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + pwm_dvfs_opp_table: pwm-opp-table { + compatible = "operating-points-v2"; + + opp@408000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + sata_dvfs_opp_table: sata-opp-table { + compatible = "operating-points-v2"; + + opp@216000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + sata_oob_dvfs_opp_table: sata-oob-opp-table { + compatible = "operating-points-v2"; + + opp@216000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + sbc1_dvfs_opp_table: sbc1-opp-table { + compatible = "operating-points-v2"; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@60000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <60000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + + opp@100000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + sbc2_dvfs_opp_table: sbc2-opp-table { + compatible = "operating-points-v2"; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@60000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <60000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + + opp@100000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + sbc3_dvfs_opp_table: sbc3-opp-table { + compatible = "operating-points-v2"; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@60000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <60000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + + opp@100000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + sbc4_dvfs_opp_table: sbc4-opp-table { + compatible = "operating-points-v2"; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@60000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <60000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + + opp@100000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + sbc5_dvfs_opp_table: sbc5-opp-table { + compatible = "operating-points-v2"; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@60000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <60000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + + opp@100000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + sbc6_dvfs_opp_table: sbc6-opp-table { + compatible = "operating-points-v2"; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@60000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <60000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + + opp@100000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + sdmmc1_dvfs_opp_table: sdmmc1-opp-table { + compatible = "operating-points-v2"; + + opp@104000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <104000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@208000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <208000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + sdmmc3_dvfs_opp_table: sdmmc3-opp-table { + compatible = "operating-points-v2"; + + opp@104000000,950 { + opp-microvolt = <950000 950000 1350000>; + opp-hz = /bits/ 64 <104000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@208000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <208000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + spdif_out_dvfs_opp_table: spdif-out-opp-table { + compatible = "operating-points-v2"; + + opp@26000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <26000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + tvdac_dvfs_opp_table: tvdac-opp-table { + compatible = "operating-points-v2"; + + opp@220000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <220000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + tvo_dvfs_opp_table: tvo-opp-table { + compatible = "operating-points-v2"; + + opp@297000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <297000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1050>; + }; + }; + + usbd_dvfs_opp_table: usbd-opp-table { + compatible = "operating-points-v2"; + + opp@480000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + usb2_dvfs_opp_table: usb2-opp-table { + compatible = "operating-points-v2"; + + opp@480000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + usb3_dvfs_opp_table: usb3-opp-table { + compatible = "operating-points-v2"; + + opp@480000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + vde_dvfs_opp_table: vde-opp-table { + compatible = "operating-points-v2"; + + opp@228000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <228000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1000>; + }; + + opp@247000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <247000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1000>; + }; + + opp@275000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <275000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1050>; + }; + + opp@304000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <304000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1050>; + }; + + opp@332000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <332000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1100>; + }; + + opp@352000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <352000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1100>; + }; + + opp@380000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <380000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1150>; + }; + + opp@400000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1150>; + }; + + opp@416000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <416000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1200>; + }; + + opp@437000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <437000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1200>; + }; + + opp@484000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <484000000>; + opp-supported-hw = <0x000C>; + required-opps = <&core_opp_1250>; + }; + + opp@520000000,1300 { + opp-microvolt = <1300000 1300000 1350000>; + opp-hz = /bits/ 64 <520000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1300>; + }; + + opp@600000000,1350 { + opp-microvolt = <1350000 1350000 1350000>; + opp-hz = /bits/ 64 <600000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1350>; + }; + }; + + vi_dvfs_opp_table: vi-opp-table { + compatible = "operating-points-v2"; + + opp@216000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1000>; + }; + + opp@219000000,1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <219000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1000>; + }; + + opp@267000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <267000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1050>; + }; + + opp@285000000,1050 { + opp-microvolt = <1050000 1050000 1350000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1050>; + }; + + opp@300000000,1100 { + opp-microvolt = <1100000 1100000 1350000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1100>; + }; + + opp@371000000,1150 { + opp-microvolt = <1150000 1150000 1350000>; + opp-hz = /bits/ 64 <371000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1150>; + }; + + opp@409000000,1200 { + opp-microvolt = <1200000 1200000 1350000>; + opp-hz = /bits/ 64 <409000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1200>; + }; + + opp@425000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <425000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1250>; + }; + + opp@470000000,1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <470000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index eaf4951d9ff8..c8130f8f680e 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -55,6 +55,8 @@ pcie@3000 { <&tegra_car 72>, <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; + operating-points-v2 = <&pcie_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled";

pci@1,0 { @@ -124,6 +126,8 @@ host1x@50000000 { resets = <&tegra_car 28>; reset-names = "host1x"; iommus = <&mc TEGRA_SWGROUP_HC>; + operating-points-v2 = <&host1x_dvfs_opp_table>; + power-domains = <&pd_heg>;

#address-cells = <1>; #size-cells = <1>; @@ -137,6 +141,8 @@ mpe@54040000 { clocks = <&tegra_car TEGRA30_CLK_MPE>; resets = <&tegra_car 60>; reset-names = "mpe"; + operating-points-v2 = <&mpe_dvfs_opp_table>; + power-domains = <&pd_mpe>;

iommus = <&mc TEGRA_SWGROUP_MPE>; }; @@ -148,6 +154,8 @@ vi@54080000 { clocks = <&tegra_car TEGRA30_CLK_VI>; resets = <&tegra_car 20>; reset-names = "vi"; + operating-points-v2 = <&vi_dvfs_opp_table>; + power-domains = <&pd_venc>;

iommus = <&mc TEGRA_SWGROUP_VI>; }; @@ -159,6 +167,8 @@ epp@540c0000 { clocks = <&tegra_car TEGRA30_CLK_EPP>; resets = <&tegra_car 19>; reset-names = "epp"; + operating-points-v2 = <&epp_dvfs_opp_table>; + power-domains = <&pd_heg>;

iommus = <&mc TEGRA_SWGROUP_EPP>; }; @@ -170,6 +180,7 @@ isp@54100000 { clocks = <&tegra_car TEGRA30_CLK_ISP>; resets = <&tegra_car 23>; reset-names = "isp"; + power-domains = <&pd_venc>;

iommus = <&mc TEGRA_SWGROUP_ISP>; }; @@ -181,6 +192,8 @@ gr2d@54140000 { clocks = <&tegra_car TEGRA30_CLK_GR2D>; resets = <&tegra_car 21>; reset-names = "2d"; + operating-points-v2 = <&gr2d_dvfs_opp_table>; + power-domains = <&pd_heg>;

iommus = <&mc TEGRA_SWGROUP_G2>; }; @@ -194,6 +207,9 @@ gr3d@54180000 { resets = <&tegra_car 24>, <&tegra_car 98>; reset-names = "3d", "3d2"; + operating-points-v2 = <&gr3d_dvfs_opp_table>; + power-domains = <&pd_3d0>, <&pd_3d1>; + power-domain-names = "3d0", "3d1";

iommus = <&mc TEGRA_SWGROUP_NV>, <&mc TEGRA_SWGROUP_NV2>; @@ -208,6 +224,8 @@ dc@54200000 { clock-names = "dc", "parent"; resets = <&tegra_car 27>; reset-names = "dc"; + operating-points-v2 = <&disp1_dvfs_opp_table>; + power-domains = <&pd_core>;

iommus = <&mc TEGRA_SWGROUP_DC>;

@@ -238,6 +256,8 @@ dc@54240000 { clock-names = "dc", "parent"; resets = <&tegra_car 26>; reset-names = "dc"; + operating-points-v2 = <&disp2_dvfs_opp_table>; + power-domains = <&pd_core>;

iommus = <&mc TEGRA_SWGROUP_DCB>;

@@ -268,6 +288,8 @@ hdmi@54280000 { clock-names = "hdmi", "parent"; resets = <&tegra_car 51>; reset-names = "hdmi"; + operating-points-v2 = <&hdmi_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -276,6 +298,8 @@ tvo@542c0000 { reg = <0x542c0000 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA30_CLK_TVO>; + operating-points-v2 = <&tvo_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -287,6 +311,8 @@ dsi@54300000 { clock-names = "dsi", "parent"; resets = <&tegra_car 48>; reset-names = "dsi"; + operating-points-v2 = <&dsia_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -298,6 +324,8 @@ dsi@54400000 { clock-names = "dsi", "parent"; resets = <&tegra_car 84>; reset-names = "dsi"; + operating-points-v2 = <&dsib_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; }; }; @@ -358,6 +386,34 @@ tegra_car: clock@60006000 { reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + + sclk { + compatible = "nvidia,tegra30-sclk"; + operating-points-v2 = <&sclk_dvfs_opp_table>; + clocks = <&tegra_car TEGRA30_CLK_SCLK>; + power-domains = <&pd_core>; + }; + + pll-c { + compatible = "nvidia,tegra30-pllc"; + operating-points-v2 = <&pll_c_dvfs_opp_table>; + clocks = <&tegra_car TEGRA30_CLK_PLL_C>; + power-domains = <&pd_core>; + }; + + pll-e { + compatible = "nvidia,tegra30-plle"; + operating-points-v2 = <&pll_e_dvfs_opp_table>; + clocks = <&tegra_car TEGRA30_CLK_PLL_E>; + power-domains = <&pd_core>; + }; + + pll-m { + compatible = "nvidia,tegra30-pllm"; + operating-points-v2 = <&pll_m_dvfs_opp_table>; + clocks = <&tegra_car TEGRA30_CLK_PLL_M>; + power-domains = <&pd_core>; + }; };

flow-controller@60007000 { @@ -468,6 +524,8 @@ vde@6001a000 { reset-names = "vde", "mc"; resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>; iommus = <&mc TEGRA_SWGROUP_VDE>; + operating-points-v2 = <&vde_dvfs_opp_table>; + power-domains = <&pd_vde>; };

apbmisc@70000800 { @@ -565,6 +623,8 @@ gmi@70009000 { clock-names = "gmi"; resets = <&tegra_car 42>; reset-names = "gmi"; + operating-points-v2 = <&nor_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -575,6 +635,8 @@ pwm: pwm@7000a000 { clocks = <&tegra_car TEGRA30_CLK_PWM>; resets = <&tegra_car 17>; reset-names = "pwm"; + operating-points-v2 = <&pwm_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -676,6 +738,8 @@ spi@7000d400 { reset-names = "spi"; dmas = <&apbdma 15>, <&apbdma 15>; dma-names = "rx", "tx"; + operating-points-v2 = <&sbc1_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -690,6 +754,8 @@ spi@7000d600 { reset-names = "spi"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; + operating-points-v2 = <&sbc2_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -704,6 +770,8 @@ spi@7000d800 { reset-names = "spi"; dmas = <&apbdma 17>, <&apbdma 17>; dma-names = "rx", "tx"; + operating-points-v2 = <&sbc3_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -718,6 +786,8 @@ spi@7000da00 { reset-names = "spi"; dmas = <&apbdma 18>, <&apbdma 18>; dma-names = "rx", "tx"; + operating-points-v2 = <&sbc4_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -732,6 +802,8 @@ spi@7000dc00 { reset-names = "spi"; dmas = <&apbdma 27>, <&apbdma 27>; dma-names = "rx", "tx"; + operating-points-v2 = <&sbc5_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -746,6 +818,8 @@ spi@7000de00 { reset-names = "spi"; dmas = <&apbdma 28>, <&apbdma 28>; dma-names = "rx", "tx"; + operating-points-v2 = <&sbc6_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -765,6 +839,72 @@ tegra_pmc: pmc@7000e400 { clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; #clock-cells = <1>; + + pd_core: core-domain { + operating-points-v2 = <&core_opp_table>; + #power-domain-cells = <0>; + }; + + powergates { + pd_3d0: td { + clocks = <&tegra_car TEGRA30_CLK_GR3D>; + resets = <&mc TEGRA30_MC_RESET_3D>, + <&tegra_car TEGRA30_CLK_GR3D>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_3d1: td2 { + clocks = <&tegra_car TEGRA30_CLK_GR3D2>; + resets = <&mc TEGRA30_MC_RESET_3D2>, + <&tegra_car TEGRA30_CLK_GR3D2>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_venc: venc { + clocks = <&tegra_car TEGRA30_CLK_ISP>, + <&tegra_car TEGRA30_CLK_VI>, + <&tegra_car TEGRA30_CLK_CSI>; + resets = <&mc TEGRA30_MC_RESET_ISP>, + <&mc TEGRA30_MC_RESET_VI>, + <&tegra_car TEGRA30_CLK_ISP>, + <&tegra_car 20 /* VI */>, + <&tegra_car TEGRA30_CLK_CSI>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_vde: vdec { + clocks = <&tegra_car TEGRA30_CLK_VDE>; + resets = <&mc TEGRA30_MC_RESET_VDE>, + <&tegra_car TEGRA30_CLK_VDE>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_mpe: mpe { + clocks = <&tegra_car TEGRA30_CLK_MPE>; + resets = <&mc TEGRA30_MC_RESET_MPE>, + <&tegra_car TEGRA30_CLK_MPE>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_heg: heg { + clocks = <&tegra_car TEGRA30_CLK_GR2D>, + <&tegra_car TEGRA30_CLK_EPP>, + <&tegra_car TEGRA30_CLK_HOST1X>; + resets = <&mc TEGRA30_MC_RESET_2D>, + <&mc TEGRA30_MC_RESET_EPP>, + <&mc TEGRA30_MC_RESET_HC>, + <&tegra_car TEGRA30_CLK_GR2D>, + <&tegra_car TEGRA30_CLK_EPP>, + <&tegra_car TEGRA30_CLK_HOST1X>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + }; };

mc: memory-controller@7000f000 { @@ -785,6 +925,7 @@ emc: memory-controller@7000f400 { reg = <0x7000f400 0x400>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA30_CLK_EMC>; + power-domains = <&pd_core>;

nvidia,memory-controller = <&mc>; operating-points-v2 = <&emc_icc_dvfs_opp_table>; @@ -799,6 +940,8 @@ fuse@7000f800 { clock-names = "fuse"; resets = <&tegra_car 39>; reset-names = "fuse"; + operating-points-v2 = <&fuse_burn_dvfs_opp_table>; + power-domains = <&pd_core>; };

tsensor: tsensor@70014000 { @@ -921,6 +1064,8 @@ mmc@78000000 { clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; + operating-points-v2 = <&sdmmc1_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -943,6 +1088,8 @@ mmc@78000400 { clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; + operating-points-v2 = <&sdmmc3_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -967,6 +1114,8 @@ usb@7d000000 { reset-names = "usb"; nvidia,needs-double-reset; nvidia,phy = <&phy1>; + operating-points-v2 = <&usbd_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -1006,6 +1155,8 @@ usb@7d004000 { resets = <&tegra_car 58>; reset-names = "usb"; nvidia,phy = <&phy2>; + operating-points-v2 = <&usb2_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -1044,6 +1195,8 @@ usb@7d008000 { resets = <&tegra_car 59>; reset-names = "usb"; nvidia,phy = <&phy3>; + operating-points-v2 = <&usb3_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

Memory access must be blocked before hardware reset is asserted and before power is gated, otherwise a serious hardware fault is inevitable. Add reset for memory clients to the GR2D, GR3D and Host1x nodes.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- arch/arm/boot/dts/tegra30.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index c8130f8f680e..09cb1ab75312 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -123,8 +123,8 @@ host1x@50000000 { interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA30_CLK_HOST1X>; clock-names = "host1x"; - resets = <&tegra_car 28>; - reset-names = "host1x"; + resets = <&tegra_car 28>, <&mc TEGRA30_MC_RESET_HC>; + reset-names = "host1x", "mc"; iommus = <&mc TEGRA_SWGROUP_HC>; operating-points-v2 = <&host1x_dvfs_opp_table>; power-domains = <&pd_heg>; @@ -190,8 +190,8 @@ gr2d@54140000 { reg = <0x54140000 0x00040000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA30_CLK_GR2D>; - resets = <&tegra_car 21>; - reset-names = "2d"; + resets = <&tegra_car 21>, <&mc TEGRA30_MC_RESET_2D>; + reset-names = "2d", "mc"; operating-points-v2 = <&gr2d_dvfs_opp_table>; power-domains = <&pd_heg>;

@@ -205,8 +205,10 @@ gr3d@54180000 { <&tegra_car TEGRA30_CLK_GR3D2>; clock-names = "3d", "3d2"; resets = <&tegra_car 24>, - <&tegra_car 98>; - reset-names = "3d", "3d2"; + <&tegra_car 98>, + <&mc TEGRA30_MC_RESET_3D>, + <&mc TEGRA30_MC_RESET_3D2>; + reset-names = "3d", "3d2", "mc", "mc2"; operating-points-v2 = <&gr3d_dvfs_opp_table>; power-domains = <&pd_3d0>, <&pd_3d1>; power-domain-names = "3d0", "3d1";