When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace.
Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447 Reported-by: Thomas Blume thomas.blume@suse.com Signed-off-by: Takashi Iwai tiwai@suse.de
--- drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c index 3695cde669f8..07914e36939e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c @@ -132,11 +132,12 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode) duty = nvkm_therm_update_linear(therm); break; case NVBIOS_THERM_FAN_OTHER: - if (therm->cstate) + if (therm->cstate) { duty = therm->cstate; - else + poll = false; + } else { duty = nvkm_therm_update_linear_fallback(therm); - poll = false; + } break; } immd = false;
On Wed, 12 Sep 2018 at 20:59, Takashi Iwai tiwai@suse.de wrote:
When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace.
Martin,
Any thoughts on this?
Ben.
Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447 Reported-by: Thomas Blume thomas.blume@suse.com Signed-off-by: Takashi Iwai tiwai@suse.de
drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c index 3695cde669f8..07914e36939e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c @@ -132,11 +132,12 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode) duty = nvkm_therm_update_linear(therm); break; case NVBIOS_THERM_FAN_OTHER:
if (therm->cstate)
if (therm->cstate) { duty = therm->cstate;
else
poll = false;} else { duty = nvkm_therm_update_linear_fallback(therm);
poll = false;
} break; } immd = false;-- 2.18.0
Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau
On 14/09/2018 10:28, Ben Skeggs wrote:
On Wed, 12 Sep 2018 at 20:59, Takashi Iwai tiwai@suse.de wrote:
When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace.
Martin,
Any thoughts on this?
Ben.
Wow, blast from the past!
Anyway, the analysis is pretty spot on here. When using the cstate-based fan speed (change the speed of the fan based on what frequency is used), then polling is unnecessary and this function should only be called when changing the pstate.
However, in the absence of ANY information, we fallback to a temperature-based management which requires constant polling, so the patch is accurate and poll = false should only be set if we have a cstate.
So, the patch is Reviewed-by: Martin Peres martin.peres@free.fr
Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447
I see that Thomas has been having issues with the noise level anyway. I suggest he should bump the value of temp1_auto_point1_temp (see https://www.kernel.org/doc/Documentation/thermal/nouveau_thermal).
The default value is set to 90°C which is quite safe on these old GPUs (NVIDIA G71 / nv49). I would say that it is safe to go up to 110°C. Which should reduce the noise level.
Another technique may be to reduce the minimum fan speed to something lower than 30°C. It should increase the slope but reduce the noise level at a given temperature.
One reason why these GPUs run so hot on nouveau is the lack of power and clock gating. I am sorry that I never finished to reverse engineer these...
Anyway, thanks a lot for the patch!
Reported-by: Thomas Blume thomas.blume@suse.com Signed-off-by: Takashi Iwai tiwai@suse.de
drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c index 3695cde669f8..07914e36939e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c @@ -132,11 +132,12 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode) duty = nvkm_therm_update_linear(therm); break; case NVBIOS_THERM_FAN_OTHER:
if (therm->cstate)
if (therm->cstate) { duty = therm->cstate;
else
poll = false;} else { duty = nvkm_therm_update_linear_fallback(therm);
poll = false;
} break; } immd = false;-- 2.18.0
Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau
On Fri, 14 Sep 2018 13:59:25 +0200, Martin Peres wrote:
On 14/09/2018 10:28, Ben Skeggs wrote:
On Wed, 12 Sep 2018 at 20:59, Takashi Iwai tiwai@suse.de wrote:
When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace.
Martin,
Any thoughts on this?
Ben.
Wow, blast from the past!
Anyway, the analysis is pretty spot on here. When using the cstate-based fan speed (change the speed of the fan based on what frequency is used), then polling is unnecessary and this function should only be called when changing the pstate.
However, in the absence of ANY information, we fallback to a temperature-based management which requires constant polling, so the patch is accurate and poll = false should only be set if we have a cstate.
So, the patch is Reviewed-by: Martin Peres martin.peres@free.fr
Just a gentle reminder: this patch seems forgotten for 4.20 merge. Could you guys pick it if it's OK?
Thanks!
Takashi
Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447
I see that Thomas has been having issues with the noise level anyway. I suggest he should bump the value of temp1_auto_point1_temp (see https://www.kernel.org/doc/Documentation/thermal/nouveau_thermal).
The default value is set to 90°C which is quite safe on these old GPUs (NVIDIA G71 / nv49). I would say that it is safe to go up to 110°C. Which should reduce the noise level.
Another technique may be to reduce the minimum fan speed to something lower than 30°C. It should increase the slope but reduce the noise level at a given temperature.
One reason why these GPUs run so hot on nouveau is the lack of power and clock gating. I am sorry that I never finished to reverse engineer these...
Anyway, thanks a lot for the patch!
Reported-by: Thomas Blume thomas.blume@suse.com Signed-off-by: Takashi Iwai tiwai@suse.de
drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c index 3695cde669f8..07914e36939e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c @@ -132,11 +132,12 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode) duty = nvkm_therm_update_linear(therm); break; case NVBIOS_THERM_FAN_OTHER:
if (therm->cstate)
if (therm->cstate) { duty = therm->cstate;
else
poll = false;} else { duty = nvkm_therm_update_linear_fallback(therm);
poll = false;
} break; } immd = false;-- 2.18.0
Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau
Ben - ping? Just ran into this myself on a NV42.
On Wed, Nov 14, 2018 at 11:01 AM Takashi Iwai tiwai@suse.de wrote:
On Fri, 14 Sep 2018 13:59:25 +0200, Martin Peres wrote:
On 14/09/2018 10:28, Ben Skeggs wrote:
On Wed, 12 Sep 2018 at 20:59, Takashi Iwai tiwai@suse.de wrote:
When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace.
Martin,
Any thoughts on this?
Ben.
Wow, blast from the past!
Anyway, the analysis is pretty spot on here. When using the cstate-based fan speed (change the speed of the fan based on what frequency is used), then polling is unnecessary and this function should only be called when changing the pstate.
However, in the absence of ANY information, we fallback to a temperature-based management which requires constant polling, so the patch is accurate and poll = false should only be set if we have a cstate.
So, the patch is Reviewed-by: Martin Peres martin.peres@free.fr
Just a gentle reminder: this patch seems forgotten for 4.20 merge. Could you guys pick it if it's OK?
Thanks!
Takashi
Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447
I see that Thomas has been having issues with the noise level anyway. I suggest he should bump the value of temp1_auto_point1_temp (see https://www.kernel.org/doc/Documentation/thermal/nouveau_thermal).
The default value is set to 90°C which is quite safe on these old GPUs (NVIDIA G71 / nv49). I would say that it is safe to go up to 110°C. Which should reduce the noise level.
Another technique may be to reduce the minimum fan speed to something lower than 30°C. It should increase the slope but reduce the noise level at a given temperature.
One reason why these GPUs run so hot on nouveau is the lack of power and clock gating. I am sorry that I never finished to reverse engineer these...
Anyway, thanks a lot for the patch!
Reported-by: Thomas Blume thomas.blume@suse.com Signed-off-by: Takashi Iwai tiwai@suse.de
drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c index 3695cde669f8..07914e36939e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c @@ -132,11 +132,12 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode) duty = nvkm_therm_update_linear(therm); break; case NVBIOS_THERM_FAN_OTHER:
if (therm->cstate)
if (therm->cstate) { duty = therm->cstate;
else
poll = false;} else { duty = nvkm_therm_update_linear_fallback(therm);
poll = false;
} break; } immd = false;-- 2.18.0
Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau
Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau
dri-devel@lists.freedesktop.org
-
Ben Skeggs -
Ilia Mirkin -
Martin Peres -
Takashi Iwai