As Dave reported:

This seems to have unintended side effects. GIC interrupt 117 is shared between the standard I2C controllers (i2c-bcm2835) and the l2-intc block handling the HDMI I2C interrupts.

There is not a great way to share an interrupt between an interrupt controller using the chained IRQ handler which is an interrupt flow and another driver like i2c-bcm2835 which uses an interrupt handler (although it specifies IRQF_SHARED).

Simply revert this change for now which will mean that HDMI I2C will be polled, like it was before.

Reported-by: Dave Stevenson dave.stevenson@raspberrypi.com Signed-off-by: Florian Fainelli f.fainelli@gmail.com --- arch/arm/boot/dts/bcm2711.dtsi | 12 ------------ 1 file changed, 12 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 462b1dfb0385..720beec54d61 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -308,14 +308,6 @@ dvp: clock@7ef00000 { #reset-cells = <1>; };

- bsc_intr: interrupt-controller@7ef00040 { - compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; - reg = <0x7ef00040 0x30>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - }; - aon_intr: interrupt-controller@7ef00100 { compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; reg = <0x7ef00100 0x30>; @@ -362,8 +354,6 @@ ddc0: i2c@7ef04500 { reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <0>; status = "disabled"; };

@@ -405,8 +395,6 @@ ddc1: i2c@7ef09500 { reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <1>; status = "disabled"; }; };