From: Thierry Reding treding@nvidia.com
SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification.
Signed-off-by: Thierry Reding treding@nvidia.com --- Documentation/DocBook/drm.tmpl | 6 ++ drivers/gpu/drm/Kconfig | 4 ++ drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/drm_scdc_helper.c | 111 ++++++++++++++++++++++++++++++++++ include/drm/drm_scdc_helper.h | 124 ++++++++++++++++++++++++++++++++++++++ 5 files changed, 246 insertions(+) create mode 100644 drivers/gpu/drm/drm_scdc_helper.c create mode 100644 include/drm/drm_scdc_helper.h
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b4cc6b77d382..3045be492125 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2410,6 +2410,12 @@ void intel_crt_init(struct drm_device *dev) !Edrivers/gpu/drm/drm_hdcp_helper.c </sect2> <sect2> + <title>SCDC Helper Functions Reference</title> +!Pdrivers/gpu/drm/drm_scdc_helper.c scdc helpers +!Iinclude/drm/drm_scdc_helper.h +!Edrivers/gpu/drm/drm_scdc_helper.c + </sect2> + <sect2> <title>EDID Helper Functions Reference</title> !Edrivers/gpu/drm/drm_edid.c </sect2> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index fb3a815b53f6..5dc23278be27 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -64,6 +64,10 @@ config DRM_HDCP bool depends on DRM_KMS_HELPER
+config DRM_SCDC + bool + depends on DRM_KMS_HELPER + config DRM_LOAD_EDID_FIRMWARE bool "Allow to specify an EDID data set instead of probing for it" depends on DRM_KMS_HELPER diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index c4a02a181115..e22c3dff4ae5 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -23,6 +23,7 @@ drm-$(CONFIG_OF) += drm_of.o drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \ drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o drm_kms_helper-$(CONFIG_DRM_HDCP) += drm_hdcp_helper.o +drm_kms_helper-$(CONFIG_DRM_SCDC) += drm_scdc_helper.o drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c new file mode 100644 index 000000000000..dbc9c770f5b4 --- /dev/null +++ b/drivers/gpu/drm/drm_scdc_helper.c @@ -0,0 +1,111 @@ +/* + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#include <linux/slab.h> + +#include <drm/drm_scdc_helper.h> + +/** + * DOC: scdc helpers + * + * Status and Control Data Channel (SCDC) is a mechanism introduced by the + * HDMI 2.0 specification. It is a point-to-point protocol that allows the + * HDMI source and HDMI sink to exchange data. The same I2C interface that + * is used to access EDID serves as the transport mechanism for SCDC. + */ + +#define SCDC_I2C_SLAVE_ADDRESS 0x54 + +/** + * drm_scdc_read - read a block of data from SCDC + * @adapter: I2C controller + * @offset: start offset of block to read + * @buffer: return location for the block to read + * @size: size of the block to read + * + * Reads a block of data from SCDC, starting at a given offset. + * + * Returns: + * The number of bytes read from SCDC or a negative error code on failure. + */ +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, + size_t size) +{ + struct i2c_msg msgs[2] = { + { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = 0, + .len = 1, + .buf = &offset, + }, { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = I2C_M_RD, + .len = size, + .buf = buffer, + } + }; + + return i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs)); +} +EXPORT_SYMBOL(drm_scdc_read); + +/** + * drm_scdc_write - write a block of data to SCDC + * @adapter: I2C controller + * @offset: start offset of block to write + * @buffer: block of data to write + * @size: size of the block to write + * + * Writes a block of data to SCDC, starting at a given offset. + * + * Returns: + * The number of bytes written to SCDC or a negative error code on failure. + */ +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, + const void *buffer, size_t size) +{ + struct i2c_msg msg = { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = 0, + .len = 1 + size, + .buf = NULL, + }; + void *data; + int err; + + data = kmalloc(1 + size, GFP_KERNEL); + if (!data) + return -ENOMEM; + + msg.buf = data; + + memcpy(data, &offset, sizeof(offset)); + memcpy(data + 1, buffer, size); + + err = i2c_transfer(adapter, &msg, 1); + + kfree(data); + + return err; +} +EXPORT_SYMBOL(drm_scdc_write); diff --git a/include/drm/drm_scdc_helper.h b/include/drm/drm_scdc_helper.h new file mode 100644 index 000000000000..364cf2aa9b25 --- /dev/null +++ b/include/drm/drm_scdc_helper.h @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_SCDC_HELPER_H +#define DRM_SCDC_HELPER_H + +#include <linux/i2c.h> +#include <linux/types.h> + +#define SCDC_SINK_VERSION 0x01 +#define SCDC_SOURCE_VERSION 0x02 + +#define SCDC_UPDATE_0 0x10 +#define SCDC_READ_REQUEST_TEST (1 << 2) +#define SCDC_CED_UPDATE (1 << 1) +#define SCDC_STATUS_UPDATE (1 << 0) +#define SCDC_UPDATE_1 0x11 + +#define SCDC_TMDS_CONFIG 0x20 +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 (1 << 1) +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_10 (0 << 1) +#define SCDC_SCRAMBLING_ENABLE (1 << 0) +#define SCDC_SCRAMBLER_STATUS 0x21 +#define SCDC_SCRAMBLING_STATUS (1 << 0) + +#define SCDC_CONFIG_0 0x30 +#define SCDC_READ_REQUEST_ENABLE (1 << 0) + +#define SCDC_STATUS_FLAGS_0 0x40 +#define SCDC_CH2_LOCK (1 < 3) +#define SCDC_CH1_LOCK (1 < 2) +#define SCDC_CH0_LOCK (1 < 1) +#define SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK) +#define SCDC_CLOCK_DETECT (1 << 0) +#define SCDC_STATUS_FLAGS_1 0x41 + +#define SCDC_ERR_DET_0_L 0x50 +#define SCDC_ERR_DET_0_H 0x51 +#define SCDC_ERR_DET_1_L 0x52 +#define SCDC_ERR_DET_1_H 0x53 +#define SCDC_ERR_DET_2_L 0x54 +#define SCDC_ERR_DET_2_H 0x55 +#define SCDC_CHANNEL_VALID (1 << 7) +#define SCDC_ERR_DET_CHECKSUM 0x56 + +#define SCDC_TEST_CONFIG_0 0xc0 +#define SCDC_TEST_READ_REQUEST (1 << 7) +#define SCDC_TEST_READ_REQUEST_DELAY(x) ((x) & 0x7f) + +#define SCDC_MANUFACTURER_IEEE_OUI 0xd0 +#define SCDC_MANUFACTURER_IEEE_OUI_SIZE 3 +#define SCDC_DEVICE_ID 0xd3 +#define SCDC_DEVICE_ID_SIZE 8 +#define SCDC_DEVICE_HARDWARE_REVISION 0xdb +#define SCDC_DEVICE_HARDWARE_REVISION_MAJOR(x) (((x) >> 4) & 0xf) +#define SCDC_DEVICE_HARDWARE_REVISION_MINOR(x) (((x) >> 0) & 0xf) +#define SCDC_DEVICE_SOFTWARE_MAJOR_REVISION 0xdc +#define SCDC_DEVICE_SOFTWARE_MINOR_REVISION 0xdd + +#define SCDC_MANUFACTURER_SPECIFIC 0xde +#define SCDC_MANUFACTURER_SPECIFIC_SIZE 34 + +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, + size_t size); +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, + const void *buffer, size_t size); + +/** + * drm_scdc_readb - read a single byte from SCDC + * @adapter: I2C adapter + * @offset: offset of register to read + * @value: return location for the register value + * + * Reads a single byte from SCDC. This is a convenience wrapper around the + * drm_scdc_read() function. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +static inline int drm_scdc_readb(struct i2c_adapter *adapter, u8 offset, + u8 *value) +{ + return drm_scdc_read(adapter, offset, value, sizeof(*value)); +} + +/** + * drm_scdc_writeb - write a single byte to SCDC + * @adapter: I2C adapter + * @offset: offset of register to read + * @value: return location for the register value + * + * Writes a single byte to SCDC. This is a convenience wrapper around the + * drm_scdc_write() function. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset, + u8 value) +{ + return drm_scdc_write(adapter, offset, &value, sizeof(value)); +} + +#endif
From: Thierry Reding treding@nvidia.com
Sinks compliant with the HDMI 2.0 specification may support SCDC, a mechanism for the source and the sink to communicate. Sinks advertise support for this feature in the HDMI Forum Vendor Specific Data Block as defined in the HDMI 2.0 specification, section 10.4 "Status and Control Data Channel". Implement a small helper that find the HF-VSDB and parses it to check if the sink supports SCDC.
Signed-off-by: Thierry Reding treding@nvidia.com --- drivers/gpu/drm/drm_edid.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++ include/drm/drm_crtc.h | 1 + include/linux/hdmi.h | 1 + 3 files changed, 51 insertions(+)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index d895556be4f0..af4da105d66e 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -3059,6 +3059,21 @@ static bool cea_db_is_hdmi_vsdb(const u8 *db) return hdmi_id == HDMI_IEEE_OUI; }
+static bool cea_db_is_hf_vsdb(const u8 *db) +{ + unsigned int oui; + + if (cea_db_tag(db) != VENDOR_BLOCK) + return false; + + if (cea_db_payload_len(db) < 7) + return false; + + oui = db[3] << 16 | db[2] << 8 | db[1]; + + return oui == HDMI_FORUM_IEEE_OUI; +} + #define for_each_cea_db(cea, i, start, end) \ for ((i) = (start); (i) < (end) && (i) + cea_db_payload_len(&(cea)[(i)]) < (end); (i) += cea_db_payload_len(&(cea)[(i)]) + 1)
@@ -3454,6 +3469,40 @@ bool drm_detect_hdmi_monitor(struct edid *edid) EXPORT_SYMBOL(drm_detect_hdmi_monitor);
/** + * drm_detect_hdmi_scdc - detect whether an HDMI sink supports SCDC + * @edid: sink EDID information + * + * Parse the CEA extension according to CEA-861-B to find an HF-VSDB as + * defined in HDMI 2.0, section 10.3.2 "HDMI Forum Vendor Specific Data + * Block" and checks if the SCDC_Present bit (bit 7 of byte 6) is set. + * + * Returns: + * True if the sink supports SCDC, false otherwise. + */ +bool drm_detect_hdmi_scdc(struct edid *edid) +{ + unsigned int start, end, i; + const u8 *cea; + + cea = drm_find_cea_extension(edid); + if (!cea) + return false; + + if (cea_db_offsets(cea, &start, &end)) + return false; + + for_each_cea_db(cea, i, start, end) { + if (cea_db_is_hf_vsdb(&cea[i])) { + if (cea[i + 6] & 0x80) + return true; + } + } + + return false; +} +EXPORT_SYMBOL(drm_detect_hdmi_scdc); + +/** * drm_detect_monitor_audio - check monitor audio capability * @edid: EDID block to scan * diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 53a6f2455f35..5d0b88e4a80b 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1513,6 +1513,7 @@ extern enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code); extern bool drm_detect_hdmi_monitor(struct edid *edid); extern bool drm_detect_monitor_audio(struct edid *edid); extern bool drm_rgb_quant_range_selectable(struct edid *edid); +extern bool drm_detect_hdmi_scdc(struct edid *edid); extern int drm_mode_page_flip_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_add_modes_noedid(struct drm_connector *connector, diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h index e9744202fa29..f860071e2d5a 100644 --- a/include/linux/hdmi.h +++ b/include/linux/hdmi.h @@ -35,6 +35,7 @@ enum hdmi_infoframe_type { };
#define HDMI_IEEE_OUI 0x000c03 +#define HDMI_FORUM_IEEE_OUI 0xc45dd8 #define HDMI_INFOFRAME_HEADER_SIZE 4 #define HDMI_AVI_INFOFRAME_SIZE 13 #define HDMI_SPD_INFOFRAME_SIZE 25
On Thu, Sep 24, 2015 at 06:51:35PM +0200, Thierry Reding wrote:
From: Thierry Reding treding@nvidia.com
Sinks compliant with the HDMI 2.0 specification may support SCDC, a mechanism for the source and the sink to communicate. Sinks advertise support for this feature in the HDMI Forum Vendor Specific Data Block as defined in the HDMI 2.0 specification, section 10.4 "Status and Control Data Channel". Implement a small helper that find the HF-VSDB and parses it to check if the sink supports SCDC.
Signed-off-by: Thierry Reding treding@nvidia.com
drivers/gpu/drm/drm_edid.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++ include/drm/drm_crtc.h | 1 + include/linux/hdmi.h | 1 + 3 files changed, 51 insertions(+)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index d895556be4f0..af4da105d66e 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -3059,6 +3059,21 @@ static bool cea_db_is_hdmi_vsdb(const u8 *db) return hdmi_id == HDMI_IEEE_OUI; }
+static bool cea_db_is_hf_vsdb(const u8 *db)
I would spell out the hdmi_forum here. Otherwise it's starting to look like random alphabet soup.
+{
- unsigned int oui;
- if (cea_db_tag(db) != VENDOR_BLOCK)
return false;- if (cea_db_payload_len(db) < 7)
return false;- oui = db[3] << 16 | db[2] << 8 | db[1];
- return oui == HDMI_FORUM_IEEE_OUI;
+}
#define for_each_cea_db(cea, i, start, end) \ for ((i) = (start); (i) < (end) && (i) + cea_db_payload_len(&(cea)[(i)]) < (end); (i) += cea_db_payload_len(&(cea)[(i)]) + 1)
@@ -3454,6 +3469,40 @@ bool drm_detect_hdmi_monitor(struct edid *edid) EXPORT_SYMBOL(drm_detect_hdmi_monitor);
/**
- drm_detect_hdmi_scdc - detect whether an HDMI sink supports SCDC
- @edid: sink EDID information
- Parse the CEA extension according to CEA-861-B to find an HF-VSDB as
- defined in HDMI 2.0, section 10.3.2 "HDMI Forum Vendor Specific Data
- Block" and checks if the SCDC_Present bit (bit 7 of byte 6) is set.
- Returns:
- True if the sink supports SCDC, false otherwise.
- */
+bool drm_detect_hdmi_scdc(struct edid *edid) +{
- unsigned int start, end, i;
- const u8 *cea;
- cea = drm_find_cea_extension(edid);
- if (!cea)
return false;- if (cea_db_offsets(cea, &start, &end))
return false;- for_each_cea_db(cea, i, start, end) {
if (cea_db_is_hf_vsdb(&cea[i])) {if (cea[i + 6] & 0x80)return true;}- }
- return false;
+} +EXPORT_SYMBOL(drm_detect_hdmi_scdc);
+/**
- drm_detect_monitor_audio - check monitor audio capability
- @edid: EDID block to scan
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 53a6f2455f35..5d0b88e4a80b 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1513,6 +1513,7 @@ extern enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code); extern bool drm_detect_hdmi_monitor(struct edid *edid); extern bool drm_detect_monitor_audio(struct edid *edid); extern bool drm_rgb_quant_range_selectable(struct edid *edid); +extern bool drm_detect_hdmi_scdc(struct edid *edid); extern int drm_mode_page_flip_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_add_modes_noedid(struct drm_connector *connector, diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h index e9744202fa29..f860071e2d5a 100644 --- a/include/linux/hdmi.h +++ b/include/linux/hdmi.h @@ -35,6 +35,7 @@ enum hdmi_infoframe_type { };
#define HDMI_IEEE_OUI 0x000c03 +#define HDMI_FORUM_IEEE_OUI 0xc45dd8 #define HDMI_INFOFRAME_HEADER_SIZE 4 #define HDMI_AVI_INFOFRAME_SIZE 13
#define HDMI_SPD_INFOFRAME_SIZE 25
2.5.0
dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
On Thu, 24 Sep 2015, Thierry Reding thierry.reding@gmail.com wrote:
From: Thierry Reding treding@nvidia.com
SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification.
Signed-off-by: Thierry Reding treding@nvidia.com
Documentation/DocBook/drm.tmpl | 6 ++ drivers/gpu/drm/Kconfig | 4 ++ drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/drm_scdc_helper.c | 111 ++++++++++++++++++++++++++++++++++ include/drm/drm_scdc_helper.h | 124 ++++++++++++++++++++++++++++++++++++++ 5 files changed, 246 insertions(+) create mode 100644 drivers/gpu/drm/drm_scdc_helper.c create mode 100644 include/drm/drm_scdc_helper.h
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b4cc6b77d382..3045be492125 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2410,6 +2410,12 @@ void intel_crt_init(struct drm_device *dev) !Edrivers/gpu/drm/drm_hdcp_helper.c </sect2> <sect2>
<title>SCDC Helper Functions Reference</title>+!Pdrivers/gpu/drm/drm_scdc_helper.c scdc helpers +!Iinclude/drm/drm_scdc_helper.h +!Edrivers/gpu/drm/drm_scdc_helper.c
</sect2>
<sect2> <title>EDID Helper Functions Reference</title>
!Edrivers/gpu/drm/drm_edid.c </sect2> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index fb3a815b53f6..5dc23278be27 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -64,6 +64,10 @@ config DRM_HDCP bool depends on DRM_KMS_HELPER
+config DRM_SCDC
- bool
- depends on DRM_KMS_HELPER
config DRM_LOAD_EDID_FIRMWARE bool "Allow to specify an EDID data set instead of probing for it" depends on DRM_KMS_HELPER diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index c4a02a181115..e22c3dff4ae5 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -23,6 +23,7 @@ drm-$(CONFIG_OF) += drm_of.o drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \ drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o drm_kms_helper-$(CONFIG_DRM_HDCP) += drm_hdcp_helper.o +drm_kms_helper-$(CONFIG_DRM_SCDC) += drm_scdc_helper.o drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c new file mode 100644 index 000000000000..dbc9c770f5b4 --- /dev/null +++ b/drivers/gpu/drm/drm_scdc_helper.c @@ -0,0 +1,111 @@ +/*
- Copyright (c) 2015 NVIDIA Corporation. All rights reserved.
- Permission is hereby granted, free of charge, to any person obtaining a
- copy of this software and associated documentation files (the "Software"),
- to deal in the Software without restriction, including without limitation
- the rights to use, copy, modify, merge, publish, distribute, sub license,
- and/or sell copies of the Software, and to permit persons to whom the
- Software is furnished to do so, subject to the following conditions:
- The above copyright notice and this permission notice (including the
- next paragraph) shall be included in all copies or substantial portions
- of the Software.
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
- THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- DEALINGS IN THE SOFTWARE.
- */
+#include <linux/slab.h>
+#include <drm/drm_scdc_helper.h>
+/**
- DOC: scdc helpers
- Status and Control Data Channel (SCDC) is a mechanism introduced by the
- HDMI 2.0 specification. It is a point-to-point protocol that allows the
- HDMI source and HDMI sink to exchange data. The same I2C interface that
- is used to access EDID serves as the transport mechanism for SCDC.
- */
+#define SCDC_I2C_SLAVE_ADDRESS 0x54
+/**
- drm_scdc_read - read a block of data from SCDC
- @adapter: I2C controller
- @offset: start offset of block to read
- @buffer: return location for the block to read
- @size: size of the block to read
- Reads a block of data from SCDC, starting at a given offset.
- Returns:
- The number of bytes read from SCDC or a negative error code on failure.
- */
+ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
size_t size)+{
- struct i2c_msg msgs[2] = {
{.addr = SCDC_I2C_SLAVE_ADDRESS,.flags = 0,.len = 1,.buf = &offset,}, {.addr = SCDC_I2C_SLAVE_ADDRESS,.flags = I2C_M_RD,.len = size,.buf = buffer,}- };
- return i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
+} +EXPORT_SYMBOL(drm_scdc_read);
+/**
- drm_scdc_write - write a block of data to SCDC
- @adapter: I2C controller
- @offset: start offset of block to write
- @buffer: block of data to write
- @size: size of the block to write
- Writes a block of data to SCDC, starting at a given offset.
- Returns:
- The number of bytes written to SCDC or a negative error code on failure.
- */
+ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset,
const void *buffer, size_t size)+{
- struct i2c_msg msg = {
.addr = SCDC_I2C_SLAVE_ADDRESS,.flags = 0,.len = 1 + size,.buf = NULL,- };
- void *data;
- int err;
- data = kmalloc(1 + size, GFP_KERNEL);
Just a drive-by comment without proper review... GFP_TEMPORARY?
BR, Jani.
- if (!data)
return -ENOMEM;- msg.buf = data;
- memcpy(data, &offset, sizeof(offset));
- memcpy(data + 1, buffer, size);
- err = i2c_transfer(adapter, &msg, 1);
- kfree(data);
- return err;
+} +EXPORT_SYMBOL(drm_scdc_write); diff --git a/include/drm/drm_scdc_helper.h b/include/drm/drm_scdc_helper.h new file mode 100644 index 000000000000..364cf2aa9b25 --- /dev/null +++ b/include/drm/drm_scdc_helper.h @@ -0,0 +1,124 @@ +/*
- Copyright (c) 2015 NVIDIA Corporation. All rights reserved.
- Permission is hereby granted, free of charge, to any person obtaining a
- copy of this software and associated documentation files (the "Software"),
- to deal in the Software without restriction, including without limitation
- the rights to use, copy, modify, merge, publish, distribute, sub license,
- and/or sell copies of the Software, and to permit persons to whom the
- Software is furnished to do so, subject to the following conditions:
- The above copyright notice and this permission notice (including the
- next paragraph) shall be included in all copies or substantial portions
- of the Software.
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
- THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- DEALINGS IN THE SOFTWARE.
- */
+#ifndef DRM_SCDC_HELPER_H +#define DRM_SCDC_HELPER_H
+#include <linux/i2c.h> +#include <linux/types.h>
+#define SCDC_SINK_VERSION 0x01 +#define SCDC_SOURCE_VERSION 0x02
+#define SCDC_UPDATE_0 0x10 +#define SCDC_READ_REQUEST_TEST (1 << 2) +#define SCDC_CED_UPDATE (1 << 1) +#define SCDC_STATUS_UPDATE (1 << 0) +#define SCDC_UPDATE_1 0x11
+#define SCDC_TMDS_CONFIG 0x20 +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 (1 << 1) +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_10 (0 << 1) +#define SCDC_SCRAMBLING_ENABLE (1 << 0) +#define SCDC_SCRAMBLER_STATUS 0x21 +#define SCDC_SCRAMBLING_STATUS (1 << 0)
+#define SCDC_CONFIG_0 0x30 +#define SCDC_READ_REQUEST_ENABLE (1 << 0)
+#define SCDC_STATUS_FLAGS_0 0x40 +#define SCDC_CH2_LOCK (1 < 3) +#define SCDC_CH1_LOCK (1 < 2) +#define SCDC_CH0_LOCK (1 < 1) +#define SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK) +#define SCDC_CLOCK_DETECT (1 << 0) +#define SCDC_STATUS_FLAGS_1 0x41
+#define SCDC_ERR_DET_0_L 0x50 +#define SCDC_ERR_DET_0_H 0x51 +#define SCDC_ERR_DET_1_L 0x52 +#define SCDC_ERR_DET_1_H 0x53 +#define SCDC_ERR_DET_2_L 0x54 +#define SCDC_ERR_DET_2_H 0x55 +#define SCDC_CHANNEL_VALID (1 << 7) +#define SCDC_ERR_DET_CHECKSUM 0x56
+#define SCDC_TEST_CONFIG_0 0xc0 +#define SCDC_TEST_READ_REQUEST (1 << 7) +#define SCDC_TEST_READ_REQUEST_DELAY(x) ((x) & 0x7f)
+#define SCDC_MANUFACTURER_IEEE_OUI 0xd0 +#define SCDC_MANUFACTURER_IEEE_OUI_SIZE 3 +#define SCDC_DEVICE_ID 0xd3 +#define SCDC_DEVICE_ID_SIZE 8 +#define SCDC_DEVICE_HARDWARE_REVISION 0xdb +#define SCDC_DEVICE_HARDWARE_REVISION_MAJOR(x) (((x) >> 4) & 0xf) +#define SCDC_DEVICE_HARDWARE_REVISION_MINOR(x) (((x) >> 0) & 0xf) +#define SCDC_DEVICE_SOFTWARE_MAJOR_REVISION 0xdc +#define SCDC_DEVICE_SOFTWARE_MINOR_REVISION 0xdd
+#define SCDC_MANUFACTURER_SPECIFIC 0xde +#define SCDC_MANUFACTURER_SPECIFIC_SIZE 34
+ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
size_t size);+ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset,
const void *buffer, size_t size);+/**
- drm_scdc_readb - read a single byte from SCDC
- @adapter: I2C adapter
- @offset: offset of register to read
- @value: return location for the register value
- Reads a single byte from SCDC. This is a convenience wrapper around the
- drm_scdc_read() function.
- Returns:
- 0 on success or a negative error code on failure.
- */
+static inline int drm_scdc_readb(struct i2c_adapter *adapter, u8 offset,
u8 *value)+{
- return drm_scdc_read(adapter, offset, value, sizeof(*value));
+}
+/**
- drm_scdc_writeb - write a single byte to SCDC
- @adapter: I2C adapter
- @offset: offset of register to read
- @value: return location for the register value
- Writes a single byte to SCDC. This is a convenience wrapper around the
- drm_scdc_write() function.
- Returns:
- 0 on success or a negative error code on failure.
- */
+static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset,
u8 value)+{
- return drm_scdc_write(adapter, offset, &value, sizeof(value));
+}
+#endif
2.5.0
dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
On Thu, Sep 24, 2015 at 06:51:34PM +0200, Thierry Reding wrote:
From: Thierry Reding treding@nvidia.com
SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification.
Signed-off-by: Thierry Reding treding@nvidia.com
Documentation/DocBook/drm.tmpl | 6 ++ drivers/gpu/drm/Kconfig | 4 ++ drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/drm_scdc_helper.c | 111 ++++++++++++++++++++++++++++++++++ include/drm/drm_scdc_helper.h | 124 ++++++++++++++++++++++++++++++++++++++ 5 files changed, 246 insertions(+) create mode 100644 drivers/gpu/drm/drm_scdc_helper.c create mode 100644 include/drm/drm_scdc_helper.h
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b4cc6b77d382..3045be492125 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2410,6 +2410,12 @@ void intel_crt_init(struct drm_device *dev) !Edrivers/gpu/drm/drm_hdcp_helper.c </sect2> <sect2>
<title>SCDC Helper Functions Reference</title>+!Pdrivers/gpu/drm/drm_scdc_helper.c scdc helpers +!Iinclude/drm/drm_scdc_helper.h +!Edrivers/gpu/drm/drm_scdc_helper.c
</sect2>
<sect2> <title>EDID Helper Functions Reference</title>
!Edrivers/gpu/drm/drm_edid.c </sect2> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index fb3a815b53f6..5dc23278be27 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -64,6 +64,10 @@ config DRM_HDCP bool depends on DRM_KMS_HELPER
+config DRM_SCDC
- bool
- depends on DRM_KMS_HELPER
config DRM_LOAD_EDID_FIRMWARE bool "Allow to specify an EDID data set instead of probing for it" depends on DRM_KMS_HELPER diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index c4a02a181115..e22c3dff4ae5 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -23,6 +23,7 @@ drm-$(CONFIG_OF) += drm_of.o drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \ drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o drm_kms_helper-$(CONFIG_DRM_HDCP) += drm_hdcp_helper.o +drm_kms_helper-$(CONFIG_DRM_SCDC) += drm_scdc_helper.o drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c new file mode 100644 index 000000000000..dbc9c770f5b4 --- /dev/null +++ b/drivers/gpu/drm/drm_scdc_helper.c @@ -0,0 +1,111 @@ +/*
- Copyright (c) 2015 NVIDIA Corporation. All rights reserved.
- Permission is hereby granted, free of charge, to any person obtaining a
- copy of this software and associated documentation files (the "Software"),
- to deal in the Software without restriction, including without limitation
- the rights to use, copy, modify, merge, publish, distribute, sub license,
- and/or sell copies of the Software, and to permit persons to whom the
- Software is furnished to do so, subject to the following conditions:
- The above copyright notice and this permission notice (including the
- next paragraph) shall be included in all copies or substantial portions
- of the Software.
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
- THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- DEALINGS IN THE SOFTWARE.
- */
+#include <linux/slab.h>
+#include <drm/drm_scdc_helper.h>
+/**
- DOC: scdc helpers
- Status and Control Data Channel (SCDC) is a mechanism introduced by the
- HDMI 2.0 specification. It is a point-to-point protocol that allows the
- HDMI source and HDMI sink to exchange data. The same I2C interface that
- is used to access EDID serves as the transport mechanism for SCDC.
- */
+#define SCDC_I2C_SLAVE_ADDRESS 0x54
+/**
- drm_scdc_read - read a block of data from SCDC
- @adapter: I2C controller
- @offset: start offset of block to read
- @buffer: return location for the block to read
- @size: size of the block to read
- Reads a block of data from SCDC, starting at a given offset.
- Returns:
- The number of bytes read from SCDC or a negative error code on failure.
- */
+ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
size_t size)+{
- struct i2c_msg msgs[2] = {
{.addr = SCDC_I2C_SLAVE_ADDRESS,.flags = 0,.len = 1,.buf = &offset,}, {.addr = SCDC_I2C_SLAVE_ADDRESS,.flags = I2C_M_RD,.len = size,.buf = buffer,}- };
- return i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
+} +EXPORT_SYMBOL(drm_scdc_read);
+/**
- drm_scdc_write - write a block of data to SCDC
- @adapter: I2C controller
- @offset: start offset of block to write
- @buffer: block of data to write
- @size: size of the block to write
- Writes a block of data to SCDC, starting at a given offset.
- Returns:
- The number of bytes written to SCDC or a negative error code on failure.
- */
+ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset,
const void *buffer, size_t size)+{
- struct i2c_msg msg = {
.addr = SCDC_I2C_SLAVE_ADDRESS,.flags = 0,.len = 1 + size,.buf = NULL,- };
- void *data;
- int err;
- data = kmalloc(1 + size, GFP_KERNEL);
- if (!data)
return -ENOMEM;
I was wondering if we could use the NOSTART flag to do this without the extra malloc+copy. But I don't suppose we couldn't rely on NOSTART being supported by the algo, so we'd need to check for it.
Anyway, just a random thought, probably not worth the hassle.
- msg.buf = data;
- memcpy(data, &offset, sizeof(offset));
- memcpy(data + 1, buffer, size);
- err = i2c_transfer(adapter, &msg, 1);
- kfree(data);
- return err;
+} +EXPORT_SYMBOL(drm_scdc_write); diff --git a/include/drm/drm_scdc_helper.h b/include/drm/drm_scdc_helper.h new file mode 100644 index 000000000000..364cf2aa9b25 --- /dev/null +++ b/include/drm/drm_scdc_helper.h @@ -0,0 +1,124 @@ +/*
- Copyright (c) 2015 NVIDIA Corporation. All rights reserved.
- Permission is hereby granted, free of charge, to any person obtaining a
- copy of this software and associated documentation files (the "Software"),
- to deal in the Software without restriction, including without limitation
- the rights to use, copy, modify, merge, publish, distribute, sub license,
- and/or sell copies of the Software, and to permit persons to whom the
- Software is furnished to do so, subject to the following conditions:
- The above copyright notice and this permission notice (including the
- next paragraph) shall be included in all copies or substantial portions
- of the Software.
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
- THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- DEALINGS IN THE SOFTWARE.
- */
+#ifndef DRM_SCDC_HELPER_H +#define DRM_SCDC_HELPER_H
+#include <linux/i2c.h> +#include <linux/types.h>
+#define SCDC_SINK_VERSION 0x01 +#define SCDC_SOURCE_VERSION 0x02
+#define SCDC_UPDATE_0 0x10 +#define SCDC_READ_REQUEST_TEST (1 << 2) +#define SCDC_CED_UPDATE (1 << 1) +#define SCDC_STATUS_UPDATE (1 << 0)
How about indenting the bit defines a bit, or use some other way to make them stand out from the offset defines slightly? We use the indent trick in i915_reg.h, and I've come to like it.
Unfortuntely I don't have the HDMI 2.0 spec on me (hopefully I can dig it up from somewhere soonish) so can't review the magic numbers and whatnot. But from a technical point of view the patches look good to me.
+#define SCDC_UPDATE_1 0x11
+#define SCDC_TMDS_CONFIG 0x20 +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 (1 << 1) +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_10 (0 << 1) +#define SCDC_SCRAMBLING_ENABLE (1 << 0) +#define SCDC_SCRAMBLER_STATUS 0x21 +#define SCDC_SCRAMBLING_STATUS (1 << 0)
+#define SCDC_CONFIG_0 0x30 +#define SCDC_READ_REQUEST_ENABLE (1 << 0)
+#define SCDC_STATUS_FLAGS_0 0x40 +#define SCDC_CH2_LOCK (1 < 3) +#define SCDC_CH1_LOCK (1 < 2) +#define SCDC_CH0_LOCK (1 < 1) +#define SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK) +#define SCDC_CLOCK_DETECT (1 << 0) +#define SCDC_STATUS_FLAGS_1 0x41
+#define SCDC_ERR_DET_0_L 0x50 +#define SCDC_ERR_DET_0_H 0x51 +#define SCDC_ERR_DET_1_L 0x52 +#define SCDC_ERR_DET_1_H 0x53 +#define SCDC_ERR_DET_2_L 0x54 +#define SCDC_ERR_DET_2_H 0x55 +#define SCDC_CHANNEL_VALID (1 << 7) +#define SCDC_ERR_DET_CHECKSUM 0x56
+#define SCDC_TEST_CONFIG_0 0xc0 +#define SCDC_TEST_READ_REQUEST (1 << 7) +#define SCDC_TEST_READ_REQUEST_DELAY(x) ((x) & 0x7f)
+#define SCDC_MANUFACTURER_IEEE_OUI 0xd0 +#define SCDC_MANUFACTURER_IEEE_OUI_SIZE 3 +#define SCDC_DEVICE_ID 0xd3 +#define SCDC_DEVICE_ID_SIZE 8 +#define SCDC_DEVICE_HARDWARE_REVISION 0xdb +#define SCDC_DEVICE_HARDWARE_REVISION_MAJOR(x) (((x) >> 4) & 0xf) +#define SCDC_DEVICE_HARDWARE_REVISION_MINOR(x) (((x) >> 0) & 0xf) +#define SCDC_DEVICE_SOFTWARE_MAJOR_REVISION 0xdc +#define SCDC_DEVICE_SOFTWARE_MINOR_REVISION 0xdd
+#define SCDC_MANUFACTURER_SPECIFIC 0xde +#define SCDC_MANUFACTURER_SPECIFIC_SIZE 34
+ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
size_t size);+ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset,
const void *buffer, size_t size);+/**
- drm_scdc_readb - read a single byte from SCDC
- @adapter: I2C adapter
- @offset: offset of register to read
- @value: return location for the register value
- Reads a single byte from SCDC. This is a convenience wrapper around the
- drm_scdc_read() function.
- Returns:
- 0 on success or a negative error code on failure.
- */
+static inline int drm_scdc_readb(struct i2c_adapter *adapter, u8 offset,
u8 *value)+{
- return drm_scdc_read(adapter, offset, value, sizeof(*value));
+}
+/**
- drm_scdc_writeb - write a single byte to SCDC
- @adapter: I2C adapter
- @offset: offset of register to read
- @value: return location for the register value
- Writes a single byte to SCDC. This is a convenience wrapper around the
- drm_scdc_write() function.
- Returns:
- 0 on success or a negative error code on failure.
- */
+static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset,
u8 value)+{
- return drm_scdc_write(adapter, offset, &value, sizeof(value));
+}
+#endif
2.5.0
dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel@lists.freedesktop.org
-
Jani Nikula -
Thierry Reding -
Ville Syrjälä