From: Matt Redfearn matt.redfearn@thinci.com

[ Upstream commit 67793bd3b3948dc8c8384b6430e036a30a0ecb43 ]

The driver currently sets register 0xfb (Low Refresh Rate) based on the value of mode->vrefresh. Firstly, this field is specified to be in Hz, but the magic numbers used by the code are Hz * 1000. This essentially leads to the low refresh rate always being set to 0x01, since the vrefresh value will always be less than 24000. Fix the magic numbers to be in Hz. Secondly, according to the comment in drm_modes.h, the field is not supposed to be used in a functional way anyway. Instead, use the helper function drm_mode_vrefresh().

Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver") Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Matt Redfearn matt.redfearn@thinci.com Signed-off-by: Sean Paul seanpaul@chromium.org Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.re... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 32ab5c32834be..1b2fae915eccb 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -735,11 +735,11 @@ static void adv7511_mode_set(struct adv7511 *adv7511, vsync_polarity = 1; }

- if (mode->vrefresh <= 24000) + if (drm_mode_vrefresh(mode) <= 24) low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ; - else if (mode->vrefresh <= 25000) + else if (drm_mode_vrefresh(mode) <= 25) low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ; - else if (mode->vrefresh <= 30000) + else if (drm_mode_vrefresh(mode) <= 30) low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ; else low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;