The current output code only supports connection to drm panels. Add code to support drm bridge, to support connections to external connectors.

Signed-off-by: Meng Yi meng.yi@nxp.com --- Changes since V1: -no change --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c index 2e71f4b..e875b4e 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c @@ -189,6 +189,7 @@ err_cleanup: static int fsl_dcu_attach_endpoint(struct fsl_dcu_drm_device *fsl_dev, const struct of_endpoint *ep) { + struct drm_bridge *bridge; struct device_node *np; int ret;

@@ -201,7 +202,17 @@ static int fsl_dcu_attach_endpoint(struct fsl_dcu_drm_device *fsl_dev, return ret; }

- return -ENODEV; + bridge = of_drm_find_bridge(np); + of_node_put(np); + if (!bridge) + return -ENODEV; + + fsl_dev->encoder.bridge = bridge; + bridge->encoder = &fsl_dev->encoder; + + ret = drm_bridge_attach(fsl_dev->drm, bridge); + + return ret; }

int fsl_dcu_create_outputs(struct fsl_dcu_drm_device *fsl_dev)

Hi Meng,

This currently does not apply on top of drm-next, can you please rebase?

Some more comments below:

On 2016-07-14 03:54, Meng Yi wrote:

This patch rework the output code to add of_graph dt binding support for panel device and also keeps the backward compatibility

Signed-off-by: Meng Yi meng.yi@nxp.com

Changes in V3: -simplify return value statements Changes in V2: -fix some coding style issue -add fsl_dev->connector.panel check -use fsl_dev->np and drop fsl_dev->dev->of_node

-return 'ret' when fsl_dcu_attach_panel failed

drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c | 2 +- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_output.h | 3 +- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 73 ++++++++++++++++++++-------- 3 files changed, 55 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c index c564ec6..b48ffa7 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c @@ -43,7 +43,7 @@ int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev) if (ret) goto fail_encoder;

• ret = fsl_dcu_drm_connector_create(fsl_dev, &fsl_dev->encoder);

• ret = fsl_dcu_create_outputs(fsl_dev); if (ret) goto fail_connector;

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_output.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_output.h index 7093109..5a7b88e 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_output.h +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_output.h @@ -25,9 +25,8 @@ to_fsl_dcu_connector(struct drm_connector *con) : NULL; }

-int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev,

• 		 struct drm_encoder *encoder);
  

int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev, struct drm_crtc *crtc); +int fsl_dcu_create_outputs(struct fsl_dcu_drm_device *fsl_dev);

#endif /* __FSL_DCU_DRM_CONNECTOR_H__ */ diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c index 98c998d..2e71f4b 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c @@ -10,6 +10,7 @@ */

#include <linux/backlight.h> +#include <linux/of_graph.h>

#include <drm/drmP.h> #include <drm/drm_atomic_helper.h> @@ -141,12 +142,12 @@ static const struct drm_connector_helper_funcs connector_helper_funcs = { .mode_valid = fsl_dcu_drm_connector_mode_valid, };

-int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev,

• 		 struct drm_encoder *encoder)
  

+static int fsl_dcu_attach_panel(struct fsl_dcu_drm_device *fsl_dev,

• 		 struct drm_panel *panel)
  

{

• struct drm_encoder *encoder = &fsl_dev->encoder; struct drm_connector *connector = &fsl_dev->connector.base; struct drm_mode_config *mode_config = &fsl_dev->drm->mode_config;

• struct device_node *panel_node; int ret;

  fsl_dev->connector.encoder = encoder;

@@ -170,21 +171,7 @@ int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev, mode_config->dpms_property, DRM_MODE_DPMS_OFF);

• panel_node = of_parse_phandle(fsl_dev->np, "fsl,panel", 0);
• if (!panel_node) {

• dev_err(fsl_dev->dev, "fsl,panel property not found\n");
  

• ret = -ENODEV;
  

• goto err_sysfs;
  

• }
• fsl_dev->connector.panel = of_drm_find_panel(panel_node);
• if (!fsl_dev->connector.panel) {

• ret = -EPROBE_DEFER;
  

• goto err_panel;
  

• }
• of_node_put(panel_node);
• ret = drm_panel_attach(fsl_dev->connector.panel, connector);

• ret = drm_panel_attach(panel, connector); if (ret) { dev_err(fsl_dev->dev, "failed to attach panel\n"); goto err_sysfs;

@@ -192,11 +179,57 @@ int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev,

return 0;

-err_panel:

• of_node_put(panel_node);

err_sysfs: drm_connector_unregister(connector); err_cleanup: drm_connector_cleanup(connector); return ret; }

+static int fsl_dcu_attach_endpoint(struct fsl_dcu_drm_device *fsl_dev,

• 		    const struct of_endpoint *ep)
  

+{

• struct device_node *np;
• int ret;
• np = of_graph_get_remote_port_parent(ep->local_node);
• fsl_dev->connector.panel = of_drm_find_panel(np);
• of_node_put(np);
• if (fsl_dev->connector.panel) {

• ret = fsl_dcu_attach_panel(fsl_dev, fsl_dev->connector.panel);
  

• return ret;
  

Why put it in a variable? That is confusing, just return like this:

return fsl_dcu_attach_panel(fsl_dev, fsl_dev->connector.panel);

• }
• return -ENODEV;

+}

+int fsl_dcu_create_outputs(struct fsl_dcu_drm_device *fsl_dev) +{

• struct of_endpoint ep;
• struct device_node *ep_node, *panel_node;
• int ret;
• /* This is for backward compatibility */
• panel_node = of_parse_phandle(fsl_dev->np, "fsl,panel", 0);
• if (panel_node) {

• fsl_dev->connector.panel = of_drm_find_panel(panel_node);
  

• of_node_put(panel_node);
  

• if (!fsl_dev->connector.panel)
  

• 	return -EPROBE_DEFER;
  

• ret = fsl_dcu_attach_panel(fsl_dev, fsl_dev->connector.panel);
  

• return ret;
  

Same here

• }
• ep_node = of_graph_get_next_endpoint(fsl_dev->np, NULL);
• if (!ep_node)

• return -ENODEV;
  

• ret = of_graph_parse_endpoint(ep_node, &ep);
• of_node_put(ep_node);
• if (ret)

• return -ENODEV;
  

• ret = fsl_dcu_attach_endpoint(fsl_dev, &ep);
• return ret;

And here.

Also did you see my other email about the Documentation changes? Please fold that in this patch, so we have the code change and the corresponding documentation change in one patch.

-- Stefan

+}