The opa362 amplifier has two ports, an input (usually connected to the OMAP3 VENC) and an output port connected to the external connector.
These are usually defined as input port@0 and outpt port@1 in the DT and really distinguished by the reg = <port_num> property of these nodes.
But we are missing to define the output port as number 1 so it does not match the DT entry.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com --- drivers/gpu/drm/omapdrm/displays/encoder-opa362.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c index afee1b8b457a..296d46f060b2 100644 --- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c +++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c @@ -208,6 +208,7 @@ static int opa362_probe(struct platform_device *pdev) dssdev->type = OMAP_DISPLAY_TYPE_VENC; dssdev->output_type = OMAP_DISPLAY_TYPE_VENC; dssdev->owner = THIS_MODULE; + dssdev->port_num = 1; /* second port */
r = omapdss_register_output(dssdev); if (r) {
Hi Nikolaus,
Thank you for the patch.
On Friday, 27 July 2018 17:24:32 EEST H. Nikolaus Schaller wrote:
The opa362 amplifier has two ports, an input (usually connected to the OMAP3 VENC) and an output port connected to the external connector.
These are usually defined as input port@0 and outpt port@1 in the DT and really distinguished by the reg = <port_num> property of these nodes.
But we are missing to define the output port as number 1 so it does not match the DT entry.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
I think this patch is superseded by "[PATCH v3 36/61] drm/omap: dss: Replace omap_dss_device port number with bitmask" which should get merged in v4.20.
drivers/gpu/drm/omapdrm/displays/encoder-opa362.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c index afee1b8b457a..296d46f060b2 100644 --- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c +++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c @@ -208,6 +208,7 @@ static int opa362_probe(struct platform_device *pdev) dssdev->type = OMAP_DISPLAY_TYPE_VENC; dssdev->output_type = OMAP_DISPLAY_TYPE_VENC; dssdev->owner = THIS_MODULE;
dssdev->port_num = 1; /* second port */
r = omapdss_register_output(dssdev); if (r) {
Hi Laurent,
Am 19.08.2018 um 16:07 schrieb Laurent Pinchart laurent.pinchart@ideasonboard.com:
Hi Nikolaus,
Thank you for the patch.
On Friday, 27 July 2018 17:24:32 EEST H. Nikolaus Schaller wrote:
The opa362 amplifier has two ports, an input (usually connected to the OMAP3 VENC) and an output port connected to the external connector.
These are usually defined as input port@0 and outpt port@1 in the DT and really distinguished by the reg = <port_num> property of these nodes.
But we are missing to define the output port as number 1 so it does not match the DT entry.
Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
I think this patch is superseded by "[PATCH v3 36/61] drm/omap: dss: Replace omap_dss_device port number with bitmask"
looks good and from cursory review it seems to resolve the opa362 bug as a side-effect. Maybe this can be noted in the commit description.
What I am not sure how this magically defines the output as reg=<1> or if we have to swap reg number definitions in the DT. But encoder-tfp410.c and encoder-tpd12s015.c seem to do it the same way, so it is very likely that it works as defined.
which should get merged in v4.20.
Well, I had hoped our bug fix makes it into v4.19 and can be potentially backported to stable.
Do you plan to backport you patch? It seems to be quite independent and should apply to older releases.
BR, Nikolaus
dri-devel@lists.freedesktop.org
-
H. Nikolaus Schaller -
Laurent Pinchart