Add the bindings for the Bifrost family of ARM Mali GPUs.

The Bifrost GPU architecture is similar to the Midgard family, but with a different Shader Core & Execution Engine structures.

Bindings are based on the Midgard family bindings, but the inner architectural changes makes it a separate family needing separate bindings.

The Bifrost GPUs are present in a number of recent SoCs, like the Amlogic G12A Family, and many other vendors. The Amlogic vendor specific compatible is added to handle the specific IP integration differences and dependencies.

Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- Changes since v1: - adding missing G31 and G52 - fixed example

.../bindings/gpu/arm,mali-bifrost.txt | 96 +++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt new file mode 100644 index 000000000000..04a1d63ee578 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt @@ -0,0 +1,96 @@ +ARM Mali Bifrost GPU +==================== + +Required properties: + +- compatible : + * Must contain one of the following: + + "arm,mali-g31" + + "arm,mali-g51" + + "arm,mali-g52" + + "arm,mali-g71" + + "arm,mali-g72" + + "arm,mali-g76" + * which must be preceded by one of the following vendor specifics: + + "amlogic,meson-g12a-mali" + +- reg : Physical base address of the device and length of the register area. + +- interrupts : Contains the three IRQ lines required by Mali Bifrost devices. + +- interrupt-names : Contains the names of IRQ resources in the order they were + provided in the interrupts property. Must contain: "job", "mmu", "gpu". + + +Optional properties: + +- clocks : Phandle to clock for the Mali Bifrost device. + +- mali-supply : Phandle to regulator for the Mali device. Refer to + Documentation/devicetree/bindings/regulator/regulator.txt for details. + +- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt + for details. + +- resets : Phandle of the GPU reset line. + +Vendor-specific bindings +------------------------ + +The Mali GPU is integrated very differently from one SoC to +another. In order to accomodate those differences, you have the option +to specify one more vendor-specific compatible, among: + +- "amlogic,meson-g12a-mali" + Required properties: + - resets : Should contain phandles of : + + GPU reset line + + GPU APB glue reset line + +Example for a Mali-G31: + +gpu@ffa30000 { + compatible = "amlogic,meson-g12a-mali", "arm,mali-g31"; + reg = <0xffe40000 0x10000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&clk CLKID_MALI>; + mali-supply = <&vdd_gpu>; + operating-points-v2 = <&gpu_opp_table>; + resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; +}; + +gpu_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1250000>; + }; + opp@450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-microvolt = <1150000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1125000>; + }; + opp@350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1075000>; + }; + opp@266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-microvolt = <1025000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <925000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <912500>; + }; +};