Convert the mxsfb binding to YAML. The deprecated binding is dropped, as neither the DT sources nor the driver support it anymore. The converted binding is named fsl,lcdif.yaml to match the usual bindings naming scheme.

The compatible strings are messy, and DT sources use different kinds of combination of documented and undocumented values. Keep it simple for now, and update the example to make it valid. Aligning the binding with the existing DT sources will be performed separately.

Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Reviewed-by: Sam Ravnborg sam@ravnborg.org Reviewed-by: Rob Herring robh@kernel.org -- Changes since v2:

- Use OF graph schema

Changes since v1:

- Drop unneeded quotes in string - Replace minItems with maxItems in conditional check - Add blank line before ... - Squash the rename in this commit --- .../bindings/display/fsl,lcdif.yaml | 101 ++++++++++++++++++ .../devicetree/bindings/display/mxsfb.txt | 87 --------------- MAINTAINERS | 2 +- 3 files changed, 102 insertions(+), 88 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/fsl,lcdif.yaml delete mode 100644 Documentation/devicetree/bindings/display/mxsfb.txt

diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml new file mode 100644 index 000000000000..bbd47d80d253 --- /dev/null +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/fsl,lcdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale/NXP i.MX LCD Interface (LCDIF) + +maintainers: + - Marek Vasut marex@denx.de + - Stefan Agner stefan@agner.ch + +description: | + (e)LCDIF display controller found in the Freescale/NXP i.MX SoCs. + +properties: + compatible: + enum: + - fsl,imx23-lcdif + - fsl,imx28-lcdif + - fsl,imx6sx-lcdif + - fsl,imx8mq-lcdif + + reg: + maxItems: 1 + + clocks: + items: + - description: Pixel clock + - description: Bus clock + - description: Display AXI clock + minItems: 1 + + clock-names: + items: + - const: pix + - const: axi + - const: disp_axi + minItems: 1 + + interrupts: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: The LCDIF output port + +required: + - compatible + - reg + - clocks + - interrupts + - port + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx6sx-lcdif + then: + properties: + clocks: + minItems: 2 + maxItems: 3 + clock-names: + minItems: 2 + maxItems: 3 + required: + - clock-names + else: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + +examples: + - | + #include <dt-bindings/clock/imx6sx-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + display-controller@2220000 { + compatible = "fsl,imx6sx-lcdif"; + reg = <0x02220000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + + port { + endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt deleted file mode 100644 index c985871c46b3..000000000000 --- a/Documentation/devicetree/bindings/display/mxsfb.txt +++ /dev/null @@ -1,87 +0,0 @@ -* Freescale MXS LCD Interface (LCDIF) - -New bindings: -============= -Required properties: -- compatible: Should be "fsl,imx23-lcdif" for i.MX23. - Should be "fsl,imx28-lcdif" for i.MX28. - Should be "fsl,imx6sx-lcdif" for i.MX6SX. - Should be "fsl,imx8mq-lcdif" for i.MX8MQ. -- reg: Address and length of the register set for LCDIF -- interrupts: Should contain LCDIF interrupt -- clocks: A list of phandle + clock-specifier pairs, one for each - entry in 'clock-names'. -- clock-names: A list of clock names. For MXSFB it should contain: - - "pix" for the LCDIF block clock - - (MX6SX-only) "axi", "disp_axi" for the bus interface clock - -Required sub-nodes: - - port: The connection to an encoder chip. - -Example: - - lcdif1: display-controller@2220000 { - compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; - reg = <0x02220000 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, - <&clks IMX6SX_CLK_LCDIF_APB>, - <&clks IMX6SX_CLK_DISPLAY_AXI>; - clock-names = "pix", "axi", "disp_axi"; - - port { - parallel_out: endpoint { - remote-endpoint = <&panel_in_parallel>; - }; - }; - }; - -Deprecated bindings: -==================== -Required properties: -- compatible: Should be "fsl,imx23-lcdif" for i.MX23. - Should be "fsl,imx28-lcdif" for i.MX28. -- reg: Address and length of the register set for LCDIF -- interrupts: Should contain LCDIF interrupts -- display: phandle to display node (see below for details) - -* display node - -Required properties: -- bits-per-pixel: <16> for RGB565, <32> for RGB888/666. -- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>. - -Required sub-node: -- display-timings: Refer to binding doc display-timing.txt for details. - -Examples: - -lcdif@80030000 { - compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; - interrupts = <38 86>; - - display: display { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <164>; - hback-porch = <89>; - hsync-len = <10>; - vback-porch = <23>; - vfront-porch = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; diff --git a/MAINTAINERS b/MAINTAINERS index d082757ca672..9d241b832aae 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12180,7 +12180,7 @@ M: Stefan Agner stefan@agner.ch L: dri-devel@lists.freedesktop.org S: Supported T: git git://anongit.freedesktop.org/drm/drm-misc -F: Documentation/devicetree/bindings/display/mxsfb.txt +F: Documentation/devicetree/bindings/display/fsl,lcdif.yaml F: drivers/gpu/drm/mxsfb/

MYLEX DAC960 PCI RAID Controller

From: Marek Vasut marex@denx.de

NXP's i.MX8MM has an LCDIF as well.

Signed-off-by: Marek Vasut marex@denx.de Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com --- Changes since v1:

- Rebased on top of the YAML conversion

Cc: Fabio Estevam festevam@gmail.com Cc: Guido Günther agx@sigxcpu.org Cc: Lucas Stach l.stach@pengutronix.de Cc: NXP Linux Team linux-imx@nxp.com Cc: Rob Herring robh+dt@kernel.org Cc: Shawn Guo shawnguo@kernel.org --- Documentation/devicetree/bindings/display/fsl,lcdif.yaml | 1 + 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index 4fc24d482b1c..a4c3064c778c 100644 --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -26,6 +26,7 @@ properties: - fsl,imx6sll-lcdif - fsl,imx6ul-lcdif - fsl,imx7d-lcdif + - fsl,imx8mm-lcdif - fsl,imx8mq-lcdif - const: fsl,imx6sx-lcdif