Convert the Silicon Image SiI9234 HDMI/MHL bridge documentation to YAML.

Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com --- .../bindings/display/bridge/sii9234.txt | 49 -------- .../bindings/display/bridge/sil,sii9234.yaml | 110 ++++++++++++++++++ 2 files changed, 110 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/sii9234.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt deleted file mode 100644 index a55bf77bd960..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt +++ /dev/null @@ -1,49 +0,0 @@ -Silicon Image SiI9234 HDMI/MHL bridge bindings - -Required properties: - - compatible : "sil,sii9234". - - reg : I2C address for TPI interface, use 0x39 - - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) - - iovcc18-supply : I/O Supply Voltage (1.8V) - - avcc12-supply : TMDS Analog Supply Voltage (1.2V) - - cvcc12-supply : Digital Core Supply Voltage (1.2V) - - interrupts: interrupt specifier of INT pin - - reset-gpios: gpio specifier of RESET pin (active low) - - video interfaces: Device node can contain two video interface port - nodes for HDMI encoder and connector according to [1]. - - port@0 - MHL to HDMI - - port@1 - MHL to connector - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example: - sii9234@39 { - compatible = "sil,sii9234"; - reg = <0x39>; - avcc33-supply = <&vcc33mhl>; - iovcc18-supply = <&vcc18mhl>; - avcc12-supply = <&vsil12>; - cvcc12-supply = <&vsil12>; - reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpf3>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - port@1 { - reg = <1>; - mhl_to_connector: endpoint { - remote-endpoint = <&connector_to_mhl>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml new file mode 100644 index 000000000000..f88ddfe4818b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image SiI9234 HDMI/MHL bridge + +maintainers: + - Maciej Purski m.purski@samsung.com + +properties: + compatible: + const: sil,sii9234 + + reg: + description: I2C address for TPI interface + maxItems: 1 + + avcc12-supply: + description: TMDS Analog Supply Voltage, 1.2V + + avcc33-supply: + description: MHL/USB Switch Supply Voltage, 3.3V + + cvcc12-supply: + description: Digital Core Supply Voltage, 1.2V + + iovcc18-supply: + description: I/O voltage supply, 1.8V + + interrupts: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the reset pin. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for HDMI (encoder) input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + MHL to connector port + + required: + - port@0 + +required: + - compatible + - reg + - avcc12-supply + - avcc33-supply + - cvcc12-supply + - iovcc18-supply + - interrupts + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc12-supply = <&vsil12>; + avcc33-supply = <&vcc33mhl>; + cvcc12-supply = <&vsil12>; + iovcc18-supply = <&vcc18mhl>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; + }; + +...