This panel is used by my tegra board and supported by the simple-panel driver.
Signed-off-by: Stéphane Marchesin marcheu@chromium.org --- drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 309f29e..46dcad0 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -284,6 +284,28 @@ static const struct panel_desc auo_b101aw03 = { }, };
+static const struct drm_display_mode auo_b133xtn01_mode = { + .clock = 69500, + .hdisplay = 1366, + .hsync_start = 1366 + 48, + .hsync_end = 1366 + 48 + 32, + .htotal = 1366 + 48 + 32 + 20, + .vdisplay = 768, + .vsync_start = 768 + 3, + .vsync_end = 768 + 3 + 6, + .vtotal = 768 + 3 + 6 + 13, + .vrefresh = 60, +}; + +static const struct panel_desc auo_b133xtn01 = { + .modes = &auo_b133xtn01_mode, + .num_modes = 1, + .size = { + .width = 293, + .height = 164, + }, +}; + static const struct drm_display_mode chunghwa_claa101wa01a_mode = { .clock = 72070, .hdisplay = 1366, @@ -377,6 +399,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "auo,b101aw03", .data = &auo_b101aw03, }, { + .compatible = "auo,b133xtn01", + .data = &auo_b133xtn01, + }, { .compatible = "chunghwa,claa101wa01a", .data = &chunghwa_claa101wa01a }, {
On Tue, May 20, 2014 at 04:36:48PM -0700, Stéphane Marchesin wrote:
This panel is used by my tegra board and supported by the simple-panel driver.
One thing I like to have is some indication in the commit message about which board this panel is used on. Of course if you can't disclose that yet I'll still take the patch, but perhaps you can be a little more specific than "my Tegra board".
There also seem to be different variants of this panel. I've come across datasheets for B133XTN01.0 and B133XTN01.2. The 1.0 seems to be native LVDS whereas it looks as if the 1.2 comes with an additional module to connect it to eDP. Which one is it that you use? I guess independent of the specific model the timings will still work, but device tree mandates that the compatible for the most specific model be used. Perhaps this panel should be:
compatible = "auo,b133xtn01.2", "auo,b133xtn01", "simple-panel";
That would allow the panel-simple driver to match on "auo,b133xtn01" and pick up the timing that presumably works for both.
One other nit below:
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
[...]
+static const struct panel_desc auo_b133xtn01 = {
- .modes = &auo_b133xtn01_mode,
- .num_modes = 1,
- .size = {
.width = 293,.height = 164,
According to the datasheet I found this is 164.97 mm, in which case I think it may be better to round up to get a more accurate value of the DPI.
Thierry
On Thu, May 22, 2014 at 4:02 AM, Thierry Reding thierry.reding@gmail.comwrote:
On Tue, May 20, 2014 at 04:36:48PM -0700, Stéphane Marchesin wrote:
This panel is used by my tegra board and supported by the simple-panel driver.
One thing I like to have is some indication in the commit message about which board this panel is used on. Of course if you can't disclose that yet I'll still take the patch, but perhaps you can be a little more specific than "my Tegra board".
There also seem to be different variants of this panel. I've come across datasheets for B133XTN01.0 and B133XTN01.2. The 1.0 seems to be native LVDS whereas it looks as if the 1.2 comes with an additional module to connect it to eDP. Which one is it that you use? I guess independent of the specific model the timings will still work, but device tree mandates that the compatible for the most specific model be used. Perhaps this panel should be:
I'm using the B133XTN01.2. The panel specs are not exactly the same (the 1.2 has a single clock, 69.5MHz while the 1.0 does 60-80MHz), but the fixed timing that I put in the DT will work on both.
Stéphane
compatible = "auo,b133xtn01.2", "auo,b133xtn01", "simple-panel";That would allow the panel-simple driver to match on "auo,b133xtn01" and pick up the timing that presumably works for both.
One other nit below:
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c [...]
+static const struct panel_desc auo_b133xtn01 = {
.modes = &auo_b133xtn01_mode,.num_modes = 1,.size = {.width = 293,.height = 164,According to the datasheet I found this is 164.97 mm, in which case I think it may be better to round up to get a more accurate value of the DPI.
Thierry
dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel@lists.freedesktop.org
-
Stéphane Marchesin -
Stéphane Marchesin -
Thierry Reding