Changes since v1: - fix coding style. - change mtk_mipi_tx_config_calibration_data() to void
Jitao Shi (4): dt-binds: display: mediatek: add property to control mipi tx drive current dt-binds: display: mediatek: get mipitx calibration data from nvmem drm/mediatek: add the mipitx driving control drm/mediatek: config mipitx impedance with calibration data
.../display/mediatek/mediatek,dsi.txt | 9 +++ drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 6 ++ drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 + drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 64 +++++++++++++++++++ 4 files changed, 80 insertions(+)
Add a property to control mipi tx drive current: "mipitx-current-drive"
Signed-off-by: Jitao Shi jitao.shi@mediatek.com --- .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index a19a6cc375ed..780201ddcd5c 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -33,6 +33,9 @@ Required properties: - #clock-cells: must be <0>; - #phy-cells: must be <0>.
+Optional properties: +- mipitx-current-drive: adjust driving current, should be 1 ~ 0xF + Example:
mipi_tx0: mipi-dphy@10215000 { @@ -42,6 +45,7 @@ mipi_tx0: mipi-dphy@10215000 { clock-output-names = "mipi_tx0_pll"; #clock-cells = <0>; #phy-cells = <0>; + mipitx-current-drive = <0x8>; };
dsi0: dsi@1401b000 {
On Tue, Feb 25, 2020 at 07:47:27PM +0800, Jitao Shi wrote:
Add a property to control mipi tx drive current: "mipitx-current-drive"
'dt-bindings: display: ...' for the subject prefix.
Signed-off-by: Jitao Shi jitao.shi@mediatek.com
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index a19a6cc375ed..780201ddcd5c 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -33,6 +33,9 @@ Required properties:
- #clock-cells: must be <0>;
- #phy-cells: must be <0>.
+Optional properties: +- mipitx-current-drive: adjust driving current, should be 1 ~ 0xF
Perhaps should be a common property and use the existing 'drive-strength-microamp'.
Example:
mipi_tx0: mipi-dphy@10215000 { @@ -42,6 +45,7 @@ mipi_tx0: mipi-dphy@10215000 { clock-output-names = "mipi_tx0_pll"; #clock-cells = <0>; #phy-cells = <0>;
- mipitx-current-drive = <0x8>;
};
dsi0: dsi@1401b000 {
2.21.0
Add properties to get get mipitx calibration data.
Signed-off-by: Jitao Shi jitao.shi@mediatek.com --- .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index 780201ddcd5c..7f12eb729791 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -34,6 +34,9 @@ Required properties: - #phy-cells: must be <0>.
Optional properties: +- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If + unspecified default values shall be used. +- nvmem-cell-names: Should be "calibration-data" - mipitx-current-drive: adjust driving current, should be 1 ~ 0xF
Example: @@ -45,6 +48,8 @@ mipi_tx0: mipi-dphy@10215000 { clock-output-names = "mipi_tx0_pll"; #clock-cells = <0>; #phy-cells = <0>; + nvmem-cells= <&mipi_tx_calibration>; + nvmem-cell-names = "calibration-data"; mipitx-current-drive = <0x8>; };
Add a property in device tree to control the driving by different board.
Signed-off-by: Jitao Shi jitao.shi@mediatek.com --- drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 6 ++++++ drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 + drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++ 3 files changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c index e4d34484ecc8..ec8406c86bfb 100644 --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c @@ -125,6 +125,12 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev) return ret; }
+ ret = of_property_read_u32(dev->of_node, "mipitx-current-drive", + &mipi_tx->mipitx_drive); + /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */ + if (ret < 0) + mipi_tx->mipitx_drive = 0x8; + ref_clk_name = __clk_get_name(ref_clk);
ret = of_property_read_string(dev->of_node, "clock-output-names", diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h index 413f35d86219..eea44327fe9f 100644 --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h @@ -27,6 +27,7 @@ struct mtk_mipi_tx { struct device *dev; void __iomem *regs; u32 data_rate; + u32 mipitx_drive; const struct mtk_mipitx_data *driver_data; struct clk_hw pll_hw; struct clk *pll; diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c index 91f08a351fd0..124fdf95f1e5 100644 --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c @@ -17,6 +17,9 @@ #define RG_DSI_BG_CORE_EN BIT(7) #define RG_DSI_PAD_TIEL_SEL BIT(8)
+#define MIPITX_VOLTAGE_SEL 0x0010 +#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6) + #define MIPITX_PLL_PWR 0x0028 #define MIPITX_PLL_CON0 0x002c #define MIPITX_PLL_CON1 0x0030 @@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy) mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN); mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL, + RG_DSI_HSTX_LDO_REF_SEL, + mipi_tx->mipitx_drive << 6); + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN); }
On 25/02/2020 12:47, Jitao Shi wrote:
Add a property in device tree to control the driving by different board.
Signed-off-by: Jitao Shi jitao.shi@mediatek.com
Reviewed-by: Matthias Brugger matthias.bgg@gmail.com
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 6 ++++++ drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 + drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++ 3 files changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c index e4d34484ecc8..ec8406c86bfb 100644 --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c @@ -125,6 +125,12 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev) return ret; }
ret = of_property_read_u32(dev->of_node, "mipitx-current-drive",
&mipi_tx->mipitx_drive);/* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
if (ret < 0)
mipi_tx->mipitx_drive = 0x8;ref_clk_name = __clk_get_name(ref_clk);
ret = of_property_read_string(dev->of_node, "clock-output-names",
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h index 413f35d86219..eea44327fe9f 100644 --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h @@ -27,6 +27,7 @@ struct mtk_mipi_tx { struct device *dev; void __iomem *regs; u32 data_rate;
- u32 mipitx_drive; const struct mtk_mipitx_data *driver_data; struct clk_hw pll_hw; struct clk *pll;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c index 91f08a351fd0..124fdf95f1e5 100644 --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c @@ -17,6 +17,9 @@ #define RG_DSI_BG_CORE_EN BIT(7) #define RG_DSI_PAD_TIEL_SEL BIT(8)
+#define MIPITX_VOLTAGE_SEL 0x0010 +#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
#define MIPITX_PLL_PWR 0x0028 #define MIPITX_PLL_CON0 0x002c #define MIPITX_PLL_CON1 0x0030 @@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy) mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN); mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
- mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
RG_DSI_HSTX_LDO_REF_SEL,mipi_tx->mipitx_drive << 6);- mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
Read calibration data from nvmem, and config mipitx impedance with calibration data to make sure their impedance are 100ohm.
Signed-off-by: Jitao Shi jitao.shi@mediatek.com --- drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c index 124fdf95f1e5..878feeb7ac6c 100644 --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c @@ -5,6 +5,8 @@ */
#include "mtk_mipi_tx.h" +#include <linux/nvmem-consumer.h> +#include <linux/slab.h>
#define MIPITX_LANE_CON 0x000c #define RG_DSI_CPHY_T1DRV_EN BIT(0) @@ -28,6 +30,7 @@ #define MIPITX_PLL_CON4 0x003c #define RG_DSI_PLL_IBIAS (3 << 10)
+#define MIPITX_D2P_RTCODE 0x0100 #define MIPITX_D2_SW_CTL_EN 0x0144 #define MIPITX_D0_SW_CTL_EN 0x0244 #define MIPITX_CK_CKMODE_EN 0x0328 @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = { .recalc_rate = mtk_mipi_tx_pll_recalc_rate, };
+static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx) +{ + u32 *buf; + u32 rt_code[5]; + int i, j; + struct nvmem_cell *cell; + struct device *dev = mipi_tx->dev; + size_t len; + + cell = nvmem_cell_get(dev, "calibration-data"); + if (IS_ERR(cell)) { + dev_info(dev, "nvmem_cell_get fail\n"); + return; + } + + buf = (u32 *)nvmem_cell_read(cell, &len); + + nvmem_cell_put(cell); + + if (IS_ERR(buf)) { + dev_info(dev, "can't get data\n"); + return; + } + + if (len < 3 * sizeof(u32)) { + dev_info(dev, "invalid calibration data\n"); + kfree(buf); + return; + } + + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f); + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f); + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f); + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f); + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f); + + for (i = 0; i < 5; i++) { + if ((rt_code[i] & 0x1f) == 0) + rt_code[i] |= 0x10; + + if ((rt_code[i] >> 5 & 0x1f) == 0) + rt_code[i] |= 0x10 << 5; + + for (j = 0; j < 10; j++) + mtk_mipi_tx_update_bits(mipi_tx, + MIPITX_D2P_RTCODE * (i + 1) + j * 4, + 1, rt_code[i] >> j & 1); + } + + kfree(buf); +} + static void mtk_mipi_tx_power_on_signal(struct phy *phy) { struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy) RG_DSI_HSTX_LDO_REF_SEL, mipi_tx->mipitx_drive << 6);
+ mtk_mipi_tx_config_calibration_data(mipi_tx); + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN); }
dri-devel@lists.freedesktop.org
-
Jitao Shi -
Matthias Brugger -
Rob Herring