Commit "drm/vc4: hdmi: Convert to gpiod" changes the behavior of vc4_hdmi_connector_detect() which results into CPU hangs in case there is no HDMI connected. Let's restore the old behavior.
Reported-by: Nathan Chancellor nathan@kernel.org Reported-by: Ojaswin Mujoo ojaswin98@gmail.com Fixes: 6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod") Signed-off-by: Stefan Wahren stefan.wahren@i2se.com --- drivers/gpu/drm/vc4/vc4_hdmi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index aab1b36..cf8339c 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -168,9 +168,9 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
- if (vc4_hdmi->hpd_gpio && - gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) { - connected = true; + if (vc4_hdmi->hpd_gpio) { + if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) + connected = true; } else if (drm_probe_ddc(vc4_hdmi->ddc)) { connected = true; } else if (HDMI_READ(HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED) {
Hi,
On Mon, Jul 05, 2021 at 11:36:34PM +0200, Stefan Wahren wrote:
I already sent this patch last week:
https://lore.kernel.org/dri-devel/20210628124257.140453-3-maxime@cerno.tech/
I'm not entirely sure how this could create a CPU hang though. Withouth this patch, if the HPD GPIO is low, we would first try to retrieve the EDID, and then if it doesn't we would read the hotplug register.
The first is using a separate i2c controller (and even if it was in the same power domain, we have the pm_runtime_resume call), and the register read should be fine too?
Maxime
Hi,
Am 06.07.21 um 11:58 schrieb Maxime Ripard:
oops, i only looked in the July archive.
Yes, the real issue has been revealed by the original change and this patch only "hides" it again.
Sorry, i don't have a clue and time for further investigations.
Does it mean, you are not able to reproduce this issue?
Best regards
Maxime
Hi Stefan,
On Tue, Jul 06, 2021 at 12:48:05PM +0200, Stefan Wahren wrote:
On next-20210706 at least it works fine for me without an HDMI monitor connected, yes:
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.13.0-next-20210706-v7l (max@gilmour) (arm-linux-gnu-gcc (GCC) 10.2.1 20200826 (Red Hat Cross 10.2.1-3), GNU ld version 2.35.1-5.fc34) #329 SMP Tue Jul 6 14:42:41 CEST 2021 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Ignoring RAM at 0x0000000030000000-0x0000000038000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: bypass linux,cma node, using cmdline CMA params instead [ 0.000000] OF: reserved mem: node linux,cma compatible matching fail [ 0.000000] cma: Reserved 512 MiB at 0x000000000ec00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] percpu: Embedded 1040 pages/cpu s4230284 r8192 d21364 u4259840 [ 0.000000] pcpu-alloc: s4230284 r8192 d21364 u4259840 alloc=1040*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880 [ 0.000000] Kernel command line: video=HDMI-A-1:640x480M@60 dma.dmachans=0x7f35 bcm2709.boardrev=0xa020d3 bcm2709.serial=0xa5669abe bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.3.21:/srv/nfs/rpi/raspbian rw ip=dhcp rootwait cma=512M [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 77316K/786432K available (12288K kernel code, 103370K rwdata, 3380K rodata, 6144K init, 33450K bss, 184828K reserved, 524288K cma-reserved) [ 0.000000] ftrace: allocating 34375 entries in 101 pages [ 0.000000] ftrace: allocated 101 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 [ 0.000000] random: get_random_bytes called from start_kernel+0x854/0xa34 with crng_init=0 [ 0.000002] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000036] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000102] bcm2835: system timer (irq = 60) [ 0.000586] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000612] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000637] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000659] Switching to timer-based delay loop, resolution 52ns [ 0.002278] Console: colour dummy device 80x30 [ 0.002356] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.002392] pid_max: default: 32768 minimum: 301 [ 0.008533] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.008593] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.010791] CPU: Testing write buffer coherency: ok [ 0.011349] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012866] Setting up static identity map for 0x200000 - 0x20003c [ 0.013106] rcu: Hierarchical SRCU implementation. [ 0.014484] smp: Bringing up secondary CPUs ... [ 0.016723] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.018995] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021242] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.021394] smp: Brought up 1 node, 4 CPUs [ 0.021440] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.021462] CPU: All CPU(s) started in HYP mode. [ 0.021478] CPU: Virtualization extensions available. [ 0.022580] devtmpfs: initialized [ 0.042479] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.042836] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.042876] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.070352] pinctrl core: initialized pinctrl subsystem [ 0.072424] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.076209] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.083372] thermal_sys: Registered thermal governor 'step_wise' [ 0.084048] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.084080] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.084446] Serial: AMBA PL011 UART driver [ 0.134684] Kprobes globally optimized [ 0.139699] vgaarb: loaded [ 0.140676] SCSI subsystem initialized [ 0.141141] usbcore: registered new interface driver usbfs [ 0.141260] usbcore: registered new interface driver hub [ 0.141400] usbcore: registered new device driver usb [ 0.141892] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.143169] Advanced Linux Sound Architecture Driver Initialized. [ 0.144991] clocksource: Switched to clocksource arch_sys_counter [ 0.246109] VFS: Disk quotas dquot_6.6.0 [ 0.246313] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.246696] FS-Cache: Loaded [ 0.247040] CacheFiles: Loaded [ 0.262951] NET: Registered PF_INET protocol family [ 0.263263] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.264926] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.265014] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.265144] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.265345] TCP: Hash tables configured (established 8192 bind 8192) [ 0.265559] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.265628] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.266349] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.276322] RPC: Registered named UNIX socket transport module. [ 0.276344] RPC: Registered udp transport module. [ 0.276361] RPC: Registered tcp transport module. [ 0.276378] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.276403] PCI: CLS 0 bytes, default 64 [ 1.889804] Initialise system trusted keyrings [ 1.890178] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.892377] FS-Cache: Netfs 'nfs' registered for caching [ 1.893112] NFS: Registering the id_resolver key type [ 1.893179] Key type id_resolver registered [ 1.893198] Key type id_legacy registered [ 1.893230] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.893250] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.894766] Key type asymmetric registered [ 1.894788] Asymmetric key parser 'x509' registered [ 1.894870] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.895185] io scheduler mq-deadline registered [ 1.895218] io scheduler kyber registered [ 1.908714] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.910464] printk: console [ttyS0] disabled [ 1.910660] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 86, base_baud = 31250000) is a 16550 [ 2.635497] printk: console [ttyS0] enabled [ 2.642296] bcm2835-rng 3f104000.rng: hwrng registered [ 2.680335] brd: module loaded [ 2.709631] loop: module loaded [ 2.714089] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.721800] Loading iSCSI transport class v2.0-870. [ 2.730956] libphy: Fixed MDIO Bus: probed [ 2.736321] usbcore: registered new interface driver r8152 [ 2.741968] usbcore: registered new interface driver lan78xx [ 2.747837] usbcore: registered new interface driver smsc75xx [ 2.753762] usbcore: registered new interface driver smsc95xx [ 2.761074] usbcore: registered new interface driver uas [ 2.766610] usbcore: registered new interface driver usb-storage [ 2.773025] mousedev: PS/2 mouse device common for all mice [ 2.778712] i2c /dev entries driver [ 2.784908] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property [ 2.794748] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 2.802175] sdhci: Secure Digital Host Controller Interface driver [ 2.808468] sdhci: Copyright(c) Pierre Ossman [ 2.813153] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.820377] ledtrig-cpu: registered to indicate activity on CPUs [ 2.826870] hid: raw HID events driver (C) Jiri Kosina [ 2.832536] usbcore: registered new interface driver usbhid [ 2.838217] usbhid: USB HID core driver [ 2.843092] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 2.850455] Initializing XFRM netlink socket [ 2.854827] NET: Registered PF_PACKET protocol family [ 2.860175] Key type dns_resolver registered [ 2.864668] Registering SWP/SWPB emulation handler [ 2.870514] registered taskstats version 1 [ 2.874709] Loading compiled-in X.509 certificates [ 2.892551] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 2.906745] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-04-15T11:43:08 [ 2.910656] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) [ 3.055481] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator [ 3.063053] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator [ 3.122075] dwc2 3f980000.usb: DWC OTG Controller [ 3.126936] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 [ 3.134143] dwc2 3f980000.usb: irq 66, io mem 0x3f980000 [ 3.140048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 3.148466] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.155825] usb usb1: Product: DWC OTG Controller [ 3.160608] usb usb1: Manufacturer: Linux 5.13.0-next-20210706-v7l dwc2_hsotg [ 3.167873] usb usb1: SerialNumber: 3f980000.usb [ 3.173581] hub 1-0:1.0: USB hub found [ 3.177489] hub 1-0:1.0: 1 port detected [ 3.215472] sdhci-iproc 3f300000.mmc: allocated mmc-pwrseq [ 3.254154] mmc1: SDHCI controller on 3f300000.mmc [3f300000.mmc] using PIO [ 3.277835] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 3.285199] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.292556] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.301324] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 3.364820] random: fast init done [ 3.380119] mmc1: new high speed SDIO card at address 0001 [ 3.525019] usb 1-1: new high-speed USB device number 2 using dwc2 [ 3.775356] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 3.783673] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.791866] hub 1-1:1.0: USB hub found [ 3.795836] hub 1-1:1.0: 4 ports detected [ 4.115020] usb 1-1.1: new high-speed USB device number 3 using dwc2 [ 4.245462] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 4.253953] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.262423] hub 1-1.1:1.0: USB hub found [ 4.266572] hub 1-1.1:1.0: 3 ports detected [ 5.045034] usb 1-1.1.1: new high-speed USB device number 4 using dwc2 [ 5.175708] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 5.184386] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.459454] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 5.471946] libphy: lan78xx-mdiobus: probed [ 5.587085] random: crng init done [ 7.855008] Sending DHCP requests ., OK [ 7.899003] IP-Config: Got DHCP answer from 192.168.3.254, my address is 192.168.3.77 [ 7.906990] IP-Config: Complete: [ 7.910271] device=eth0, hwaddr=b8:27:eb:66:9a:be, ipaddr=192.168.3.77, mask=255.255.255.0, gw=192.168.3.254 [ 7.920721] host=192.168.3.77, domain=lan, nis-domain=(none) [ 7.926923] bootserver=192.168.3.254, rootserver=192.168.3.21, rootpath= [ 7.926940] nameserver0=1.1.1.1 [ 7.948448] ALSA device list: [ 7.951468] No soundcards found. [ 7.967337] VFS: Mounted root (nfs filesystem) on device 0:15. [ 7.973938] devtmpfs: mounted [ 7.999153] Freeing unused kernel image (initmem) memory: 6144K [ 8.045659] Run /sbin/init as init process [ 8.049824] with arguments: [ 8.049835] /sbin/init [ 8.049847] with environment: [ 8.049857] HOME=/ [ 8.049868] TERM=linux [ 8.605849] systemd[1]: System time before build time, advancing clock. [ 8.732583] NET: Registered PF_INET6 protocol family [ 8.740903] Segment Routing with IPv6 [ 8.841895] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.865535] systemd[1]: Detected architecture arm. [ 8.976749] systemd[1]: Set hostname to <raspberrypi>. [ 10.302081] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 10.311035] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.365266] systemd[1]: Reached target Swap. [ 10.397365] systemd[1]: Listening on Syslog Socket. [ 10.436723] systemd[1]: Listening on udev Kernel Socket. [ 10.485690] systemd[1]: Created slice system-getty.slice. [ 10.528802] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 12.177636] systemd-journald[119]: Received request to flush runtime journal from PID 1 [ 13.810728] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 13.853684] mc: Linux media interface: v0.10 [ 13.947159] bcm2835_audio bcm2835_audio: card created with 8 channels [ 13.985444] videodev: Linux video capture interface: v2.00 [ 14.432430] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 15.083811] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 15.159342] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 15.182681] debugfs: Directory '3f902000.hdmi' with parent 'vc4-hdmi' already present! [ 15.211008] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 15.214764] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 15.215857] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 15.216392] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 15.216855] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 15.217315] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 15.217710] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 15.256447] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 15.321317] Console: switching to colour frame buffer device 90x30 [ 15.330456] vc4-drm soc:gpu: [drm] fb0: vc4 frame buffer device [ 15.530230] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k FS [ 15.552819] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 15.649196] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 15.696912] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 15.710077] usbcore: registered new interface driver brcmfmac [ 15.752286] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2 [ 15.977214] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 15.990975] 8021q: 802.1Q VLAN Support v1.8 [ 15.991042] 8021q: adding VLAN 0 to HW filter on device eth0 [ 15.997628] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea
Maxime
On Tue, Jul 06, 2021 at 05:45:27PM +0200, Stefan Wahren wrote:
I can't boot multi_v7_defconfig on my setup, but I just tested multi_v7 + a few options (UART, ethernet) built-in to be able to boot, and I can't reproduce what you're seeing. It boots just fine without any monitor attached.
Maxime
Hi Maxime,
Am 07.07.21 um 15:11 schrieb Maxime Ripard:
not sure how do you boot, but USB mass storage boot for Raspberry Pi 3 B Plus is broken since Linux 5.13 with multi_v7_defconfig [1]. But this is a completely different issue.
To be more exact the hang in this case happens a few seconds after the UART console (ttyS1) becomes available.
Here is my setup:
Raspberry Pi 3 Plus DTS from mainline tree arm/multi_v7_defconfig Boot from SD card No U-Boot Rootfs: Raspberry Pi OS 32bit (May 7th 2021) VC4 firmware: 2021-04-30T13:47:07
Maybe next week, i have a little bit more time
[1] - https://www.spinics.net/lists/arm-kernel/msg905208.html
Maxime
Hi Stefan,
On Wed, Jul 07, 2021 at 08:01:50PM +0200, Stefan Wahren wrote:
A bit of an update, there's other users that reported it on 5.10, and it turns out it seems to be (partially at least) related to the options set in config.txt.
The tracking issue is there: https://github.com/raspberrypi/linux/issues/4457
It seems like the reason it was working for me all along is that I had hdmi_force_hotplug set, and it looks like it makes the issue go away. It's not clear at this point why.
Maxime
dri-devel@lists.freedesktop.org
-
Maxime Ripard -
Stefan Wahren