Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.

Other changes: - fixed reg-names numbering to match 0..3 instead 0,1,3,4 - phy part moved into phy/ directory

Signed-off-by: David Heidelberg david@ixit.cz --- v2: - move phy into phy/ - added maxItems for gpios - simplified pinctrl-names - dropped some inconsistent quotes

v3: - adjusted $id of phy file to the new path from v2 Signed-off-by: David Heidelberg david@ixit.cz --- .../devicetree/bindings/display/msm/hdmi.txt | 99 --------- .../bindings/display/msm/qcom,hdmi.yaml | 206 ++++++++++++++++++ .../bindings/phy/qcom,hdmi-phy.yaml | 119 ++++++++++ 3 files changed, 325 insertions(+), 99 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.txt create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt deleted file mode 100644 index 5f90a40da51b..000000000000 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ /dev/null @@ -1,99 +0,0 @@ -Qualcomm adreno/snapdragon hdmi output - -Required properties: -- compatible: one of the following - * "qcom,hdmi-tx-8996" - * "qcom,hdmi-tx-8994" - * "qcom,hdmi-tx-8084" - * "qcom,hdmi-tx-8974" - * "qcom,hdmi-tx-8660" - * "qcom,hdmi-tx-8960" -- reg: Physical base address and length of the controller's registers -- reg-names: "core_physical" -- interrupts: The interrupt signal from the hdmi block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See ../clocks/clock-bindings.txt for details. -- core-vdda-supply: phandle to supply regulator -- hdmi-mux-supply: phandle to mux regulator -- phys: the phandle for the HDMI PHY device -- phy-names: the name of the corresponding PHY device - -Optional properties: -- hpd-gpios: hpd pin -- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin -- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin -- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin -- power-domains: reference to the power domain(s), if available. -- pinctrl-names: the pin control state names; should contain "default" -- pinctrl-0: the default pinctrl state (active) -- pinctrl-1: the "sleep" pinctrl state - -HDMI PHY: -Required properties: -- compatible: Could be the following - * "qcom,hdmi-phy-8660" - * "qcom,hdmi-phy-8960" - * "qcom,hdmi-phy-8974" - * "qcom,hdmi-phy-8084" - * "qcom,hdmi-phy-8996" -- #phy-cells: Number of cells in a PHY specifier; Should be 0. -- reg: Physical base address and length of the registers of the PHY sub blocks. -- reg-names: The names of register regions. The following regions are required: - * "hdmi_phy" - * "hdmi_pll" - For HDMI PHY on msm8996, these additional register regions are required: - * "hdmi_tx_l0" - * "hdmi_tx_l1" - * "hdmi_tx_l3" - * "hdmi_tx_l4" -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- core-vdda-supply: phandle to vdda regulator device node - -Example: - -/ { - ... - - hdmi: hdmi@4a00000 { - compatible = "qcom,hdmi-tx-8960"; - reg-names = "core_physical"; - reg = <0x04a00000 0x2f0>; - interrupts = <GIC_SPI 79 0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "core", - "master_iface", - "slave_iface"; - clocks = - <&mmcc HDMI_APP_CLK>, - <&mmcc HDMI_M_AHB_CLK>, - <&mmcc HDMI_S_AHB_CLK>; - qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>; - qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>; - qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; - core-vdda-supply = <&pm8921_hdmi_mvs>; - hdmi-mux-supply = <&ext_3p3v>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hpd_active &ddc_active &cec_active>; - pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; - - phys = <&hdmi_phy>; - phy-names = "hdmi_phy"; - }; - - hdmi_phy: phy@4a00400 { - compatible = "qcom,hdmi-phy-8960"; - reg-names = "hdmi_phy", - "hdmi_pll"; - reg = <0x4a00400 0x60>, - <0x4a00500 0x100>; - #phy-cells = <0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = "slave_iface"; - clocks = <&mmcc HDMI_S_AHB_CLK>; - core-vdda-supply = <&pm8921_hdmi_mvs>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml b/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml new file mode 100644 index 000000000000..33ebc879af93 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,hdmi.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/qcom,hdmi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Adreno/Snapdragon HDMI output + +maintainers: + - Rob Clark robdclark@gmail.com + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,hdmi-tx-8996 + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + + clock-names: + items: + - const: mdp_core + - const: iface + - const: core + - const: alt_iface + - const: extp + else: + properties: + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + +properties: + compatible: + enum: + - qcom,hdmi-tx-8996 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8660 + - qcom,hdmi-tx-8960 + + clocks: true + + clock-names: true + + reg: + minItems: 1 + maxItems: 3 + description: Physical base address and length of the controller's registers + + reg-names: + minItems: 1 + items: + - const: core_physical + - const: qfprom_physical + - const: hdcp_physical + + interrupts: + maxItems: 1 + description: The interrupt signal from the hdmi block. + + power-domains: + description: should be <&mmcc MDSS_GDSC> + + core-vdda-supply: true + + core-vcc-supply: true + + hdmi-mux-supply: + description: phandle to mux regulator + + phys: + description: the phandle for the HDMI PHY device + + phy-names: + description: the name of the corresponding PHY device + + hpd-gpios: + maxItems: 1 + description: hpd pin + + qcom,hdmi-tx-ddc-clk-gpios: + maxItems: 1 + description: HDMI DDC clock + + qcom,hdmi-tx-ddc-data-gpios: + maxItems: 1 + description: HDMI DDC data + + qcom,hdmi-tx-mux-en-gpios: + maxItems: 1 + description: HDMI mux enable pin + + qcom,hdmi-tx-mux-sel-gpios: + maxItems: 1 + description: HDMI mux select pin + + qcom,hdmi-tx-mux-lpm-gpios: + maxItems: 1 + description: HDMI mux lpm pin + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + '#phy-cells': + const: 0 + + '#sound-dai-cells': + const: 1 + + ports: + type: object + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + Input endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 4 + items: + enum: [0, 1, 2, 3] + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + Output endpoints of the controller. + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + maxItems: 4 + minItems: 4 + items: + enum: [0, 1, 2, 3] + + required: + - port@0 + +required: + - compatible + - clocks + - clock-names + - reg + - reg-names + - interrupts + - phys + - phy-names + +additionalProperties: false + +examples: + - | + hdmi: hdmi@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg-names = "core_physical"; + reg = <0x04a00000 0x2f0>; + interrupts = <0 79 0>; + power-domains = <&mmcc 1>; + clock-names = + "core", + "master_iface", + "slave_iface"; + clocks = + <&clk 61>, + <&clk 72>, + <&clk 98>; + qcom,hdmi-tx-ddc-clk-gpios = <&msmgpio 70 0>; + qcom,hdmi-tx-ddc-data-gpios = <&msmgpio 71 0>; + hpd-gpios = <&msmgpio 72 0>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + hdmi-mux-supply = <&ext_3p3v>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hpd_active &ddc_active &cec_active>; + pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml new file mode 100644 index 000000000000..1203b0c6709f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/phy/qcom,hdmi-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Adreno/Snapdragon HDMI phy + +maintainers: + - Rob Clark robdclark@gmail.com + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,hdmi-phy-8996 + then: + properties: + reg: + minItems: 6 + maxItems: 6 + + reg-names: + items: + - const: hdmi_pll + - const: hdmi_tx_l0 + - const: hdmi_tx_l1 + - const: hdmi_tx_l2 + - const: hdmi_tx_l3 + - const: hdmi_phy + + else: + properties: + reg: + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: hdmi_phy + - const: hdmi_pll + - if: + properties: + compatible: + contains: + const: qcom,hdmi-phy-8960 + then: + properties: + clock-names: + const: slave_iface + + - if: + properties: + compatible: + contains: + const: qcom,hdmi-phy-8996 + then: + properties: + clock-names: + items: + - const: iface + - const: ref + +properties: + compatible: + contains: + enum: + - qcom,hdmi-phy-8084 + - qcom,hdmi-phy-8660 + - qcom,hdmi-phy-8960 + - qcom,hdmi-phy-8974 + - qcom,hdmi-phy-8994 + - qcom,hdmi-phy-8996 + + reg: true + + reg-names: true + + clocks: true + + clock-names: true + + power-domains: + maxItems: 1 + + core-vdda-supply: true + + vcca-supply: true + + vddio-supply: true + + '#phy-cells': + const: 0 + +required: + - compatible + - clocks + - reg + - reg-names + - '#phy-cells' + +additionalProperties: false + +examples: + - | + hdmi_phy: phy@4a00400 { + compatible = "qcom,hdmi-phy-8960"; + reg-names = "hdmi_phy", + "hdmi_pll"; + reg = <0x4a00400 0x60>, + <0x4a00500 0x100>; + #phy-cells = <0>; + power-domains = <&mmcc 1>; + clock-names = "slave_iface"; + clocks = <&clk 21>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + };