https://bugs.freedesktop.org/show_bug.cgi?id=34033
Summary: CONFIG_DRM_RADEON=y don't detect ati firmware cypress 5850 on boot ini Product: DRI Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: blocker Priority: medium Component: DRM/Radeon AssignedTo: dri-devel@lists.freedesktop.org ReportedBy: usforos@gmail.com
Funtoo x64 Linux/x86_64 2.6.38-rc4 x11-base/xorg-x11-7.4-r1 x11-base/xorg-server-1.9.3.902 x11-libs/libdrm-2.4.23 x11-drivers/xf86-video-ati-6.14.0
At boot init it stop and then continue, but don't detect firmware:
[ 1.332134] Refined TSC clocksource calibration: 2499.715 MHz. [ 1.332185] Switching to clocksource tsc [ 60.896225] r600_cp: Failed to load firmware "radeon/CYPRESS_pfp.bin" [ 60.896290] [drm:evergreen_startup] *ERROR* Failed to load firmware! [ 60.896340] radeon 0000:01:00.0: disabling GPU acceleration [ 60.897418] radeon 0000:01:00.0: ffff88011feff800 unpin not necessary [ 60.897468] radeon 0000:01:00.0: ffff88011feff800 unpin not necessary [ 60.898322] failed to evaluate ATIF got AE_BAD_PARAMETER
with CONFIG_DRM_RADEON=m and the boot is ok, and using x11-drivers/radeon-ucode the fimrware is loadink ok , i have opencl 3d.
lspci -v: 01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device 0b00 Flags: bus master, fast devsel, latency 0, IRQ 50 Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f5000000 (64-bit, non-prefetchable) [size=128K] I/O ports at a000 [size=256] [virtual] Expansion ROM at f4000000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: radeon Kernel modules: radeon
This is my .config http://www.papuweb.com/gentoo/bugs/config This is xorg log with radeon=y http://www.papuweb.com/gentoo/bugs/Xorg.0.log_radeon_yes This is my xorg log whith radeon=m and usint radeon-ucode http://www.papuweb.com/gentoo/bugs/Xorg.0.log_radeon_mod_ucode
thanks, you so much
https://bugs.freedesktop.org/show_bug.cgi?id=34033
--- Comment #1 from papu usforos@gmail.com 2011-02-08 06:18:20 PST --- Created an attachment (id=43101) --> (https://bugs.freedesktop.org/attachment.cgi?id=43101) dmesg with radeon=y
https://bugs.freedesktop.org/show_bug.cgi?id=34033
--- Comment #2 from papu usforos@gmail.com 2011-02-08 06:20:36 PST --- This is my dmseg with radeon=y http://www.papuweb.com/gentoo/bugs/dmesg_radeon_yes
https://bugs.freedesktop.org/show_bug.cgi?id=34033
papu usforos@gmail.com changed:
What |Removed |Added ---------------------------------------------------------------------------- Summary|CONFIG_DRM_RADEON=y don't |CONFIG_DRM_RADEON=y don't |detect ati firmware cypress |detect radeon cypress 5850 |5850 on boot ini |firmware on boot ini
https://bugs.freedesktop.org/show_bug.cgi?id=34033
papu usforos@gmail.com changed:
What |Removed |Added ---------------------------------------------------------------------------- Priority|medium |high
https://bugs.freedesktop.org/show_bug.cgi?id=34033
Michel Dänzer michel@daenzer.net changed:
What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |NOTABUG
--- Comment #3 from Michel Dänzer michel@daenzer.net 2011-02-08 07:15:48 PST --- The firmware is needed at radeon driver initialization time. When the driver is built into the kernel, this happens before the firmware can be loaded from userspace, so it needs to be built into the kernel as well.
https://bugs.freedesktop.org/show_bug.cgi?id=34033
--- Comment #4 from papu usforos@gmail.com 2011-02-08 10:22:16 PST --- (In reply to comment #3)
The firmware is needed at radeon driver initialization time. When the driver is built into the kernel, this happens before the firmware can be loaded from userspace, so it needs to be built into the kernel as well.
ok, i find the solution, using radeon-ucode and CONFIG_DRM_RADEON=y , you have to change this on kernel to pass firmware on the fly on boot init.
CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE=" radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin" CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware/"
thanks, you so much.
dri-devel@lists.freedesktop.org
-
bugzilla-daemon＠freedesktop.org