From: Swati Sharma swati2.sharma@intel.com

The HDMI2.1 extends HFVSDB (HDMI Forum Vendor Specific Data block) to have fields related to newly defined methods of FRL (Fixed Rate Link) levels, number of lanes supported, DSC Color bit depth, VRR min/max, FVA (Fast Vactive), ALLM etc.

This patch adds the new HFVSDB fields that are required for HDMI2.1.

v2: Minor fixes + consistent naming for DPCD register masks (Uma Shankar)

Signed-off-by: Sharma, Swati2 swati2.sharma@intel.com Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com --- include/drm/drm_edid.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)

diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index e97daf6ffbb1..a158f585f658 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -229,6 +229,36 @@ struct detailed_timing { DRM_EDID_YCBCR420_DC_36 | \ DRM_EDID_YCBCR420_DC_30)

+/* HDMI 2.1 additional fields */ +#define DRM_EDID_MAX_FRL_RATE_MASK 0xf0 +#define DRM_EDID_FAPA_START_LOCATION (1 << 0) +#define DRM_EDID_ALLM (1 << 1) +#define DRM_EDID_FVA (1 << 2) + +/* Deep Color specific */ +#define DRM_EDID_DC_30BIT_420 (1 << 0) +#define DRM_EDID_DC_36BIT_420 (1 << 1) +#define DRM_EDID_DC_48BIT_420 (1 << 2) + +/* VRR specific */ +#define DRM_EDID_CNMVRR (1 << 3) +#define DRM_EDID_CINEMA_VRR (1 << 4) +#define DRM_EDID_MDELTA (1 << 5) +#define DRM_EDID_VRR_MAX_UPPER_MASK 0xc0 +#define DRM_EDID_VRR_MAX_LOWER_MASK 0xff +#define DRM_EDID_VRR_MIN_MASK 0x3f + +/* DSC specific */ +#define DRM_EDID_DSC_10BPC (1 << 0) +#define DRM_EDID_DSC_12BPC (1 << 1) +#define DRM_EDID_DSC_16BPC (1 << 2) +#define DRM_EDID_DSC_ALL_BPP (1 << 3) +#define DRM_EDID_DSC_NATIVE_420 (1 << 6) +#define DRM_EDID_DSC_1P2 (1 << 7) +#define DRM_EDID_DSC_MAX_FRL_RATE_MASK 0xf0 +#define DRM_EDID_DSC_MAX_SLICES 0xf +#define DRM_EDID_DSC_TOTAL_CHUNK_KBYTES 0x3f + /* ELD Header Block */ #define DRM_ELD_HEADER_BLOCK_SIZE 4

This patch parses HFVSDB fields for DSC1.2 capabilities of an HDMI2.1 sink. These fields are required by a source to understand the DSC capability of the sink, to set appropriate PPS parameters, before transmitting compressed data stream.

v2: Addressed following issues as suggested by Uma Shankar: -Added a new struct for hdmi dsc cap -Fixed bugs in macros usage.

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com --- drivers/gpu/drm/drm_edid.c | 59 +++++++++++++++++++++++++++++++++++++ include/drm/drm_connector.h | 43 +++++++++++++++++++++++++++ 2 files changed, 102 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index e657c321d9e4..ca368df2e5ac 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -4941,11 +4941,70 @@ static void drm_parse_hdmi_forum_vsdb(struct drm_connector *connector,

if (hf_vsdb[7]) { u8 max_frl_rate; + u8 dsc_max_frl_rate; + u8 dsc_max_slices; + struct drm_hdmi_dsc_cap *hdmi_dsc = &hdmi->dsc_cap;

DRM_DEBUG_KMS("hdmi_21 sink detected. parsing edid\n"); max_frl_rate = (hf_vsdb[7] & DRM_EDID_MAX_FRL_RATE_MASK) >> 4; drm_get_max_frl_rate(max_frl_rate, &hdmi->max_lanes, &hdmi->max_frl_rate_per_lane); + hdmi_dsc->v_1p2 = hf_vsdb[11] & DRM_EDID_DSC_1P2; + + if (hdmi_dsc->v_1p2) { + hdmi_dsc->native_420 = hf_vsdb[11] & DRM_EDID_DSC_NATIVE_420; + hdmi_dsc->all_bpp = hf_vsdb[11] & DRM_EDID_DSC_ALL_BPP; + + if (hf_vsdb[11] & DRM_EDID_DSC_16BPC) + hdmi_dsc->bpc_supported = 16; + else if (hf_vsdb[11] & DRM_EDID_DSC_12BPC) + hdmi_dsc->bpc_supported = 12; + else if (hf_vsdb[11] & DRM_EDID_DSC_10BPC) + hdmi_dsc->bpc_supported = 10; + else + hdmi_dsc->bpc_supported = 0; + + dsc_max_frl_rate = (hf_vsdb[12] & DRM_EDID_DSC_MAX_FRL_RATE_MASK) >> 4; + drm_get_max_frl_rate(dsc_max_frl_rate, &hdmi_dsc->max_lanes, + &hdmi_dsc->max_frl_rate_per_lane); + hdmi_dsc->total_chunk_kbytes = hf_vsdb[13] & DRM_EDID_DSC_TOTAL_CHUNK_KBYTES; + + dsc_max_slices = hf_vsdb[12] & DRM_EDID_DSC_MAX_SLICES; + switch (dsc_max_slices) { + case 1: + hdmi_dsc->max_slices = 1; + hdmi_dsc->clk_per_slice = 340; + break; + case 2: + hdmi_dsc->max_slices = 2; + hdmi_dsc->clk_per_slice = 340; + break; + case 3: + hdmi_dsc->max_slices = 4; + hdmi_dsc->clk_per_slice = 340; + break; + case 4: + hdmi_dsc->max_slices = 8; + hdmi_dsc->clk_per_slice = 340; + break; + case 5: + hdmi_dsc->max_slices = 8; + hdmi_dsc->clk_per_slice = 400; + break; + case 6: + hdmi_dsc->max_slices = 12; + hdmi_dsc->clk_per_slice = 400; + break; + case 7: + hdmi_dsc->max_slices = 16; + hdmi_dsc->clk_per_slice = 400; + break; + case 0: + default: + hdmi_dsc->max_slices = 0; + hdmi_dsc->clk_per_slice = 0; + } + } }

drm_parse_ycbcr420_deep_color_info(connector, hf_vsdb); diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 1a3b4776b458..1922b278ffad 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -175,6 +175,46 @@ struct drm_scdc { struct drm_scrambling scrambling; };

+/** + * struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink + * + * Describes the DSC support provided by HDMI 2.1 sink. + * The information is fetched fom additional HFVSDB blocks defined + * for HDMI 2.1. + */ +struct drm_hdmi_dsc_cap { + /** @v_1p2: flag for dsc1.2 version support by sink */ + bool v_1p2; + + /** @native_420: Does sink support DSC with 4:2:0 compression */ + bool native_420; + + /** + * @all_bpp: Does sink support all bpp with 4:4:4: or 4:2:2 + * compressed formats + */ + bool all_bpp; + + /** + * @bpc_supported: compressed bpc supported by sink : 10, 12 or 16 bpc + */ + u8 bpc_supported; + + /** @max_slices: maximum number of Horizontal slices supported by */ + u8 max_slices; + + /** @clk_per_slice : max pixel clock in MHz supported per slice */ + int clk_per_slice; + + /** @max_lanes : dsc max lanes supported for Fixed rate Link training */ + u8 max_lanes; + + /** @max_frl_rate_per_lane : maximum frl rate with DSC per lane */ + u8 max_frl_rate_per_lane; + + /** @total_chunk_kbytes: max size of chunks in KBs supported per line*/ + u8 total_chunk_kbytes; +};

/** * struct drm_hdmi_info - runtime information about the connected HDMI sink @@ -213,6 +253,9 @@ struct drm_hdmi_info {

/** @max_lanes: supported by sink */ u8 max_lanes; + + /** @dsc_cap: DSC capabilities of the sink */ + struct drm_hdmi_dsc_cap dsc_cap; };

/**

From: Swati Sharma swati2.sharma@intel.com

There are specific DPCDs defined for detecting link failures between the PCON and HDMI sink and check the link status. In case of link failure, PCON will communicate the same using an IRQ_HPD to source. HDMI sink would have indicated the same to PCON using SCDC interrupt mechanism. While source can always read final HDMI sink's status using I2C over AUX, it is easier and faster to read the PCONs already read HDMI sink status registers.

This patch adds the DPCDs required for link failure detection and provide a helper function for printing error count/lane which might help in debugging the link failure issues.

v2: Addressed comments from Uma Shankar: -rephrased the commit message, as per the code. -fixed styling issues -added documentation for the helper function.

Signed-off-by: Swati Sharma swati2.sharma@intel.com Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com --- drivers/gpu/drm/drm_dp_helper.c | 39 +++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 17 ++++++++++++++ 2 files changed, 56 insertions(+)

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 0aba865ff6be..5a9303de9ac2 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -2898,3 +2898,42 @@ int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask) return mode; } EXPORT_SYMBOL(drm_dp_pcon_hdmi_link_mode); + +/** + * drm_dp_pcon_hdmi_frl_link_error_count() - print the error count per lane + * during link failure between PCON and HDMI sink + * @aux: DisplayPort AUX channel + * @connector: DRM connector + * code. + **/ + +void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, + struct drm_connector *connector) +{ + u8 buf, error_count; + int i, num_error; + struct drm_hdmi_info *hdmi = &connector->display_info.hdmi; + + for (i = 0; i < hdmi->max_lanes; i++) { + if (drm_dp_dpcd_readb(aux, DP_PCON_HDMI_ERROR_STATUS_LN0 + i, &buf) < 0) + return; + + error_count = buf & DP_PCON_HDMI_ERROR_COUNT_MASK; + switch (error_count) { + case DP_PCON_HDMI_ERROR_COUNT_HUNDRED_PLUS: + num_error = 100; + break; + case DP_PCON_HDMI_ERROR_COUNT_TEN_PLUS: + num_error = 10; + break; + case DP_PCON_HDMI_ERROR_COUNT_THREE_PLUS: + num_error = 3; + break; + default: + num_error = 0; + } + + DRM_ERROR("More than %d errors since the last read for lane %d", num_error, i); + } +} +EXPORT_SYMBOL(drm_dp_pcon_hdmi_frl_link_error_count); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 6afd314a33b8..ab6b7e4fb9ff 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -946,6 +946,11 @@ struct drm_device; # define DP_CEC_IRQ (1 << 2)

#define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */ +# define RX_CAP_CHANGED (1 << 0) +# define LINK_STATUS_CHANGED (1 << 1) +# define STREAM_STATUS_CHANGED (1 << 2) +# define HDMI_LINK_STATUS_CHANGED (1 << 3) +# define CONNECTED_OFF_ENTRY_REQUESTED (1 << 4)

#define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */ # define DP_PSR_LINK_CRC_ERROR (1 << 0) @@ -1130,6 +1135,16 @@ struct drm_device; #define DP_PROTOCOL_CONVERTER_CONTROL_2 0x3052 /* DP 1.3 */ # define DP_CONVERSION_TO_YCBCR422_ENABLE (1 << 0) /* DP 1.3 */

+/* PCON Downstream HDMI ERROR Status per Lane */ +#define DP_PCON_HDMI_ERROR_STATUS_LN0 0x3037 +#define DP_PCON_HDMI_ERROR_STATUS_LN1 0x3038 +#define DP_PCON_HDMI_ERROR_STATUS_LN2 0x3039 +#define DP_PCON_HDMI_ERROR_STATUS_LN3 0x303A +# define DP_PCON_HDMI_ERROR_COUNT_MASK (0x7 << 0) +# define DP_PCON_HDMI_ERROR_COUNT_THREE_PLUS (1 << 0) +# define DP_PCON_HDMI_ERROR_COUNT_TEN_PLUS (1 << 1) +# define DP_PCON_HDMI_ERROR_COUNT_HUNDRED_PLUS (1 << 2) + /* HDCP 1.3 and HDCP 2.2 */ #define DP_AUX_HDCP_BKSV 0x68000 #define DP_AUX_HDCP_RI_PRIME 0x68005 @@ -2047,5 +2062,7 @@ int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux);

bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux); int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask); +void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, + struct drm_connector *connector);

#endif /* _DRM_DP_HELPER_H_ */

DP Specification for DP2.0 to HDMI2.1 Pcon specifies support for conversion of colorspace from RGB to YCbCr. https://groups.vesa.org/wg/DP/document/previewpdf/15651

This patch adds the relavant registers and helper functions to get the capability and set the color conversion bits for rgb->ycbcr conversion through PCON.

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com --- drivers/gpu/drm/drm_dp_helper.c | 59 +++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 10 +++++- 2 files changed, 68 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index d0626f57f99c..344662d5c295 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -949,6 +949,35 @@ bool drm_dp_downstream_444_to_420_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE] } EXPORT_SYMBOL(drm_dp_downstream_444_to_420_conversion);

+/** + * drm_dp_downstream_rgb_to_ycbcr_conversion() - determine downstream facing port + * RGB->YCbCr conversion capability + * @dpcd: DisplayPort configuration data + * @port_cap: downstream facing port capabilities + * + * Returns: whether the downstream facing port can convert RGB->YCbCr + */ +bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]) +{ + if (!drm_dp_is_branch(dpcd)) + return false; + + if (dpcd[DP_DPCD_REV] < 0x13) + return false; + + switch (port_cap[0] & DP_DS_PORT_TYPE_MASK) { + case DP_DS_PORT_TYPE_HDMI: + if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DETAILED_CAP_INFO_AVAILABLE) == 0) + return false; + + return port_cap[3] & DP_DS_HDMI_BT601_RGB_YCBCR_CONV; + default: + return false; + } +} +EXPORT_SYMBOL(drm_dp_downstream_rgb_to_ycbcr_conversion); + /** * drm_dp_downstream_mode() - return a mode for downstream facing port * @dev: DRM device @@ -3140,3 +3169,33 @@ int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]) return 0; } EXPORT_SYMBOL(drm_dp_pcon_pps_override_param); + +/* + * drm_dp_pcon_convert_rgb_to_ycbcr() - Configure the PCon to convert RGB to Ycbcr + * @aux: displayPort AUX channel + * @color_spc: Color space conversion type + * + * Returns 0 on success, else returns negative error code. + */ +int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc) +{ + int ret; + u8 buf; + + if (color_spc != DP_CONVERSION_BT601_RGB_YCBCR_ENABLE || + color_spc != DP_CONVERSION_BT709_RGB_YCBCR_ENABLE || + color_spc != DP_CONVERSION_BT2020_RGB_YCBCR_ENABLE) + return -EINVAL; + + ret = drm_dp_dpcd_readb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, &buf); + if (ret < 0) + return ret; + + buf |= color_spc; + ret = drm_dp_dpcd_writeb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, buf); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_convert_rgb_to_ycbcr); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 347b4e1a55b4..1b3d54ed7a78 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -431,6 +431,9 @@ struct drm_device; # define DP_DS_HDMI_YCBCR420_PASS_THROUGH (1 << 2) # define DP_DS_HDMI_YCBCR444_TO_422_CONV (1 << 3) # define DP_DS_HDMI_YCBCR444_TO_420_CONV (1 << 4) +# define DP_DS_HDMI_BT601_RGB_YCBCR_CONV (1 << 5) +# define DP_DS_HDMI_BT709_RGB_YCBCR_CONV (1 << 6) +# define DP_DS_HDMI_BT2020_RGB_YCBCR_CONV (1 << 7)

#define DP_MAX_DOWNSTREAM_PORTS 0x10

@@ -1217,7 +1220,9 @@ struct drm_device; # define DP_PCON_ENC_PPS_OVERRIDE_DISABLED 0 # define DP_PCON_ENC_PPS_OVERRIDE_EN_PARAMS 1 # define DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER 2 - +# define DP_CONVERSION_BT601_RGB_YCBCR_ENABLE (1 << 4) +# define DP_CONVERSION_BT709_RGB_YCBCR_ENABLE (1 << 5) +# define DP_CONVERSION_BT2020_RGB_YCBCR_ENABLE (1 << 6)

/* PCON Downstream HDMI ERROR Status per Lane */ #define DP_PCON_HDMI_ERROR_STATUS_LN0 0x3037 @@ -2178,5 +2183,8 @@ int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE int drm_dp_pcon_pps_default(struct drm_dp_aux *aux); int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]); int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]); +bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc);

#endif /* _DRM_DP_HELPER_H_ */

This patch adds functions to start FRL training for an HDMI2.1 sink, connected via a PCON as a DP branch device. This patch also adds a new structure for storing frl training related data, when FRL training is completed.

v2: As suggested by Uma Shankar: -renamed couple of variables for better clarity -tweaked the macros used for correct semantics for true/false -fixed other styling issues.

v3: Completed the TODO for condition for going to FRL mode. Modified the condition to determine the required FRL b/w based only on the Pcon and Sink's max FRL values. Moved the frl structure initialization to intel_dp_init_connector().

v4: Fixed typo in initialization of frl structure.

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com (v2) --- .../drm/i915/display/intel_display_types.h | 7 + drivers/gpu/drm/i915/display/intel_dp.c | 174 ++++++++++++++++++ drivers/gpu/drm/i915/display/intel_dp.h | 3 + 3 files changed, 184 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index f77a15303223..c624c2f9b624 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -1339,6 +1339,11 @@ struct intel_dp_compliance { u8 test_lane_count; };

+struct intel_dp_pcon_frl { + bool is_trained; + int trained_rate_gbps; +}; + struct intel_dp { i915_reg_t output_reg; u32 DP; @@ -1461,6 +1466,8 @@ struct intel_dp {

bool hobl_failed; bool hobl_active; + + struct intel_dp_pcon_frl frl; };

enum lspcon_vendor { diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 2c3572891596..2aa07d82bc97 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -3887,6 +3887,8 @@ static void intel_disable_dp(struct intel_atomic_state *state, intel_edp_backlight_off(old_conn_state); intel_dp_set_power(intel_dp, DP_SET_POWER_D3); intel_edp_panel_off(intel_dp); + intel_dp->frl.is_trained = false; + intel_dp->frl.trained_rate_gbps = 0; }

static void g4x_disable_dp(struct intel_atomic_state *state, @@ -3982,6 +3984,175 @@ cpt_set_link_train(struct intel_dp *intel_dp, intel_de_posting_read(dev_priv, intel_dp->output_reg); }

+static int intel_dp_pcon_get_frl_mask(u8 frl_bw_mask) +{ + int bw_gbps[] = {9, 18, 24, 32, 40, 48}; + int i; + + for (i = ARRAY_SIZE(bw_gbps) - 1; i >= 0; i--) { + if (frl_bw_mask & (1 << i)) + return bw_gbps[i]; + } + return 0; +} + +static int intel_dp_pcon_set_frl_mask(int max_frl) +{ + + switch (max_frl) { + case 48: + return DP_PCON_FRL_BW_MASK_48GBPS; + case 40: + return DP_PCON_FRL_BW_MASK_40GBPS; + case 32: + return DP_PCON_FRL_BW_MASK_32GBPS; + case 24: + return DP_PCON_FRL_BW_MASK_24GBPS; + case 18: + return DP_PCON_FRL_BW_MASK_18GBPS; + case 9: + return DP_PCON_FRL_BW_MASK_9GBPS; + } + + return 0; +} + +static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_connector *connector = &intel_connector->base; + + return (connector->display_info.hdmi.max_frl_rate_per_lane * + connector->display_info.hdmi.max_lanes); +} + +static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp) +{ +#define PCON_EXTENDED_TRAIN_MODE (1 > 0) +#define PCON_CONCURRENT_MODE (1 > 0) +#define PCON_SEQUENTIAL_MODE !PCON_CONCURRENT_MODE +#define PCON_NORMAL_TRAIN_MODE !PCON_EXTENDED_TRAIN_MODE +#define TIMEOUT_FRL_READY_MS 500 +#define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000 + + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int max_frl_bw, max_pcon_frl_bw, max_edid_frl_bw, ret; + u8 max_frl_bw_mask = 0, frl_trained_mask; + bool is_active; + + ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux); + if (ret < 0) + return ret; + + max_pcon_frl_bw = intel_dp->dfp.pcon_max_frl_bw; + drm_dbg(&i915->drm, "PCON max rate = %d Gbps\n", max_pcon_frl_bw); + + max_edid_frl_bw = intel_dp_hdmi_sink_max_frl(intel_dp); + drm_dbg(&i915->drm, "Sink max rate from EDID = %d Gbps\n", max_edid_frl_bw); + + max_frl_bw = min(max_edid_frl_bw, max_pcon_frl_bw); + + if (max_frl_bw <= 0) + return -EINVAL; + + ret = drm_dp_pcon_frl_prepare(&intel_dp->aux, false); + if (ret < 0) + return ret; + /* Wait for PCON to be FRL Ready */ + wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == true, TIMEOUT_FRL_READY_MS); + + if (!is_active) + return -ETIMEDOUT; + + max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw); + ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, PCON_SEQUENTIAL_MODE); + if (ret < 0) + return ret; + ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, PCON_NORMAL_TRAIN_MODE); + if (ret < 0) + return ret; + ret = drm_dp_pcon_frl_enable(&intel_dp->aux); + if (ret < 0) + return ret; + /* + * Wait for FRL to be completed + * Check if the HDMI Link is up and active. + */ + wait_for(is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux) == true, TIMEOUT_HDMI_LINK_ACTIVE_MS); + + if (!is_active) + return -ETIMEDOUT; + + /* Verify HDMI Link configuration shows FRL Mode */ + if (DP_PCON_HDMI_MODE_FRL != drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, &frl_trained_mask)) { + drm_dbg(&i915->drm, "HDMI couldn't be trained in FRL Mode\n"); + return -EINVAL; + } + drm_dbg(&i915->drm, "MAX_FRL_MASK = %u, FRL_TRAINED_MASK = %u\n", max_frl_bw_mask, frl_trained_mask); + + intel_dp->frl.trained_rate_gbps = intel_dp_pcon_get_frl_mask(frl_trained_mask); + intel_dp->frl.is_trained = true; + drm_dbg(&i915->drm, "FRL trained with : %d Gbps\n", intel_dp->frl.trained_rate_gbps); + + return 0; +} + +static bool intel_dp_is_frl_required(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + int mode_clock = crtc_state->hw.adjusted_mode.crtc_clock; + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_connector *connector = &intel_connector->base; + struct drm_display_info *info = &connector->display_info; + + if (intel_dp->frl.is_trained) + return false; + /* + * FRL link training required between the PCon and HDMI2.1 sink, + * when the mode cannot be supported via TMDS. + */ + if (drm_mode_is_420_only(info, &crtc_state->hw.adjusted_mode)) + mode_clock /= 2; + + if (intel_dp->dfp.max_tmds_clock < mode_clock) + return true; + + return false; +} + +static bool intel_dp_is_hdmi_2_1_sink(struct intel_dp *intel_dp) +{ + if (drm_dp_is_branch(intel_dp->dpcd) && + intel_dp->has_hdmi_sink && + intel_dp_hdmi_sink_max_frl(intel_dp) > 0) + return true; + + return false; +} + +void intel_dp_check_frl_training(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (!intel_dp_is_hdmi_2_1_sink(intel_dp) || + !intel_dp_is_frl_required(intel_dp, crtc_state)) + return; + + if (intel_dp_pcon_start_frl_training(intel_dp) < 0) { + int ret, mode; + + drm_dbg(&dev_priv->drm, "Couldnt set FRL mode, continuing with TMDS mode\n"); + ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux); + mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL); + + if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS) + drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set TMDS mode\n"); + } else { + drm_dbg(&dev_priv->drm, "FRL training Completed\n"); + } +} + static void g4x_set_link_train(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, @@ -8210,6 +8381,9 @@ intel_dp_init_connector(struct intel_digital_port *dig_port, (temp & ~0xf) | 0xd); }

+ intel_dp->frl.is_trained = false; + intel_dp->frl.trained_rate_gbps = 0; + return true;

fail: diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h index b871a09b6901..b4a14646caea 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.h +++ b/drivers/gpu/drm/i915/display/intel_dp.h @@ -144,4 +144,7 @@ bool intel_dp_initial_fastset_check(struct intel_encoder *encoder, void intel_dp_sync_state(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state);

+void intel_dp_check_frl_training(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state); + #endif /* __INTEL_DP_H__ */

From: Swati Sharma swati2.sharma@intel.com

In this patch enables support for detecting link failures between PCON and HDMI sink in i915 driver. HDMI link loss indication to upstream DP source is indicated via IRQ_HPD. This is followed by reading of HDMI link configuration status (HDMI_TX_LINK_ACTIVE_STATUS). If the PCON → HDMI 2.1 link status is off; reinitiate frl link training to recover. Also, report HDMI FRL link error count range for each individual FRL active lane is indicated by DOWNSTREAM_HDMI_ERROR_STATUS_LN registers.

v2: Checked for dpcd read and write failures and added debug message. (Uma Shankar) v3: rearranged code to re-start FRL link training or fall back to TMDS mode.

Signed-off-by: Swati Sharma swati2.sharma@intel.com Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com --- drivers/gpu/drm/i915/display/intel_dp.c | 68 +++++++++++++++++++++++-- 1 file changed, 65 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index f8f82fe8c52a..0616779d858e 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -6032,6 +6032,43 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) return link_ok; }

+static void +intel_dp_handle_hdmi_link_status_change(struct intel_dp *intel_dp) +{ + bool is_active; + u8 buf = 0; + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux); + if (intel_dp->frl.is_trained && !is_active) { + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf) < 0) + return; + + buf &= ~DP_PCON_ENABLE_HDMI_LINK; + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf) < 0) + return; + + drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux, &intel_dp->attached_connector->base); + + intel_dp->frl.is_trained = false; + intel_dp->frl.trained_rate_gbps = 0; + + /* Restart FRL training or fall back to TMDS mode */ + if (intel_dp_pcon_start_frl_training(intel_dp) < 0) { + int ret, mode; + + drm_dbg(&dev_priv->drm, "Couldnt restart FRL, continuing with TMDS mode\n"); + ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux); + mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL); + + if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS) + drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set TMDS mode\n"); + } else { + drm_dbg(&dev_priv->drm, "FRL Re-training Completed\n"); + } + } +} + static bool intel_dp_needs_link_retrain(struct intel_dp *intel_dp) { @@ -6397,7 +6434,7 @@ intel_dp_hotplug(struct intel_encoder *encoder, return state; }

-static void intel_dp_check_service_irq(struct intel_dp *intel_dp) +static void intel_dp_check_device_service_irq(struct intel_dp *intel_dp) { struct drm_i915_private *i915 = dp_to_i915(intel_dp); u8 val; @@ -6421,6 +6458,30 @@ static void intel_dp_check_service_irq(struct intel_dp *intel_dp) drm_dbg_kms(&i915->drm, "Sink specific irq unhandled\n"); }

+static void intel_dp_check_link_service_irq(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 val; + + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (drm_dp_dpcd_readb(&intel_dp->aux, + DP_LINK_SERVICE_IRQ_VECTOR_ESI0, &val) != 1 || !val) { + drm_dbg_kms(&i915->drm, "Error in reading link service irq vector\n"); + return; + } + + if (drm_dp_dpcd_writeb(&intel_dp->aux, + DP_LINK_SERVICE_IRQ_VECTOR_ESI0, val) != 1) { + drm_dbg_kms(&i915->drm, "Error in writing link service irq vector\n"); + return; + } + + if (val & HDMI_LINK_STATUS_CHANGED) + intel_dp_handle_hdmi_link_status_change(intel_dp); +} + /* * According to DP spec * 5.1.2: @@ -6460,7 +6521,8 @@ intel_dp_short_pulse(struct intel_dp *intel_dp) return false; }

- intel_dp_check_service_irq(intel_dp); + intel_dp_check_device_service_irq(intel_dp); + intel_dp_check_link_service_irq(intel_dp);

/* Handle CEC interrupts, if any */ drm_dp_cec_irq(&intel_dp->aux); @@ -6894,7 +6956,7 @@ intel_dp_detect(struct drm_connector *connector, to_intel_connector(connector)->detect_edid) status = connector_status_connected;

- intel_dp_check_service_irq(intel_dp); + intel_dp_check_device_service_irq(intel_dp);

out: if (status != connector_status_connected && !intel_dp->is_mst)

The DP-HDMI2.1 PCON spec provides way for a source to set PPS parameters: slice height, slice width and bits_per_pixel, based on the HDMI2.1 sink capabilities. The DSC encoder of the PCON will respect these parameters, while preparing the 128 byte PPS.

This patch adds helper functions to calculate these PPS paremeters as per the HDMI2.1 specification.

v2: Addressed review comments given by Uma Shankar: -added documentation for functions -fixed typos and errors

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com --- drivers/gpu/drm/i915/display/intel_hdmi.c | 233 ++++++++++++++++++++++ drivers/gpu/drm/i915/display/intel_hdmi.h | 7 + 2 files changed, 240 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c index e10fdb369daa..41eb1c175a0e 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.c +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c @@ -3428,3 +3428,236 @@ void intel_hdmi_init(struct drm_i915_private *dev_priv, dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port); intel_hdmi_init_connector(dig_port, intel_connector); } + +/* + * intel_hdmi_dsc_get_slice_height - get the dsc slice_height + * @vactive: Vactive of a display mode + * + * @return: appropriate dsc slice height for a given mode. + */ +int intel_hdmi_dsc_get_slice_height(int vactive) +{ + int slice_height; + + /* + * Slice Height determination : HDMI2.1 Section 7.7.5.2 + * Select smallest slice height >=96, that results in a valid PPS and + * requires minimum padding lines required for final slice. + * + * Assumption : Vactive is even. + */ + for (slice_height = 96; slice_height <= vactive; slice_height += 2) + if (vactive % slice_height == 0) + return slice_height; + + return 0; +} + +/* + * intel_hdmi_dsc_get_num_slices - get no. of dsc slices based on dsc encoder + * and dsc decoder capabilites + * + * @crtc_state: intel crtc_state + * @src_max_slices: maximum slices supported by the DSC encoder + * @src_max_slice_width: maximum slice width supported by DSC encoder + * @hdmi_max_slices: maximum slices supported by sink DSC decoder + * @hdmi_throughput: maximum clock per slice (MHz) supported by HDMI sink + * + * @return: num of dsc slices that can be supported by the dsc encoder + * and decoder. + */ +int +intel_hdmi_dsc_get_num_slices(const struct intel_crtc_state *crtc_state, + int src_max_slices, int src_max_slice_width, + int hdmi_max_slices, int hdmi_throughput) +{ +/* Pixel rates in KPixels/sec */ +#define HDMI_DSC_PEAK_PIXEL_RATE 2720000 +/* + * Rates at which the source and sink are required to process pixels in each + * slice, can be two levels: either atleast 340000KHz or atleast 40000KHz. + */ +#define HDMI_DSC_MAX_ENC_THROUGHPUT_0 340000 +#define HDMI_DSC_MAX_ENC_THROUGHPUT_1 400000 + +/* Spec limits the slice width to 2720 pixels */ +#define MAX_HDMI_SLICE_WIDTH 2720 + int kslice_adjust; + int adjusted_clk_khz; + int min_slices; + int target_slices; + int max_throughput; /* max clock freq. in khz per slice */ + int max_slice_width; + int slice_width; + int pixel_clock = crtc_state->hw.adjusted_mode.crtc_clock; + + if (!hdmi_throughput) + return 0; + + /* + * Slice Width determination : HDMI2.1 Section 7.7.5.1 + * kslice_adjust factor for 4:2:0, and 4:2:2 formats is 0.5, where as + * for 4:4:4 is 1.0. Multiplying these factors by 10 and later + * dividing adjusted clock value by 10. + */ + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 || + crtc_state->output_format == INTEL_OUTPUT_FORMAT_RGB) + kslice_adjust = 10; + else + kslice_adjust = 5; + + /* + * As per spec, the rate at which the source and the sink process + * the pixels per slice are at two levels: atleast 340Mhz or 400Mhz. + * This depends upon the pixel clock rate and output formats + * (kslice adjust). + * If pixel clock * kslice adjust >= 2720MHz slices can be processed + * at max 340MHz, otherwise they can be processed at max 400MHz. + */ + + adjusted_clk_khz = DIV_ROUND_UP(kslice_adjust * pixel_clock, 10); + + if (adjusted_clk_khz <= HDMI_DSC_PEAK_PIXEL_RATE) + max_throughput = HDMI_DSC_MAX_ENC_THROUGHPUT_0; + else + max_throughput = HDMI_DSC_MAX_ENC_THROUGHPUT_1; + + /* + * Taking into account the sink's capability for maximum + * clock per slice (in MHz) as read from HF-VSDB. + */ + max_throughput = min(max_throughput, hdmi_throughput * 1000); + + min_slices = DIV_ROUND_UP(adjusted_clk_khz, max_throughput); + max_slice_width = min(MAX_HDMI_SLICE_WIDTH, src_max_slice_width); + + /* + * Keep on increasing the num of slices/line, starting from min_slices + * per line till we get such a number, for which the slice_width is + * just less than max_slice_width. The slices/line selected should be + * less than or equal to the max horizontal slices that the combination + * of PCON encoder and HDMI decoder can support. + */ + slice_width = max_slice_width; + + do { + if (min_slices <= 1 && src_max_slices >= 1 && hdmi_max_slices >= 1) + target_slices = 1; + else if (min_slices <= 2 && src_max_slices >= 2 && hdmi_max_slices >= 2) + target_slices = 2; + else if (min_slices <= 4 && src_max_slices >= 4 && hdmi_max_slices >= 4) + target_slices = 4; + else if (min_slices <= 8 && src_max_slices >= 8 && hdmi_max_slices >= 8) + target_slices = 8; + else if (min_slices <= 12 && src_max_slices >= 12 && hdmi_max_slices >= 12) + target_slices = 12; + else if (min_slices <= 16 && src_max_slices >= 16 && hdmi_max_slices >= 16) + target_slices = 16; + else + return 0; + + slice_width = DIV_ROUND_UP(crtc_state->hw.adjusted_mode.hdisplay, target_slices); + if (slice_width >= max_slice_width) + min_slices = target_slices + 1; + } while (slice_width >= max_slice_width); + + return target_slices; +} + +/* + * intel_hdmi_dsc_get_bpp - get the appropriate compressed bits_per_pixel based on + * source and sink capabilities. + * + * @src_fraction_bpp: fractional bpp supported by the source + * @slice_width: dsc slice width supported by the source and sink + * @num_slices: num of slices supported by the source and sink + * @output_format: video output format + * @hdmi_all_bpp: sink supports decoding of 1/16th bpp setting + * @hdmi_max_chunk_bytes: max bytes in a line of chunks supported by sink + * + * @return: compressed bits_per_pixel in step of 1/16 of bits_per_pixel + */ +int +intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width, int num_slices, + int output_format, bool hdmi_all_bpp, + int hdmi_max_chunk_bytes) +{ + int max_dsc_bpp, min_dsc_bpp; + int target_bytes; + bool bpp_found = false; + int bpp_decrement_x16; + int bpp_target; + int bpp_target_x16; + + /* + * Get min bpp and max bpp as per Table 7.23, in HDMI2.1 spec + * Start with the max bpp and keep on decrementing with + * fractional bpp, if supported by PCON DSC encoder + * + * for each bpp we check if no of bytes can be supported by HDMI sink + */ + + /* Assuming: bpc as 8*/ + if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420) { + min_dsc_bpp = 6; + max_dsc_bpp = 3 * 4; /* 3*bpc/2 */ + } else if (output_format == INTEL_OUTPUT_FORMAT_YCBCR444 || + output_format == INTEL_OUTPUT_FORMAT_RGB) { + min_dsc_bpp = 8; + max_dsc_bpp = 3 * 8; /* 3*bpc */ + } else { + /* Assuming 4:2:2 encoding */ + min_dsc_bpp = 7; + max_dsc_bpp = 2 * 8; /* 2*bpc */ + } + + /* + * Taking into account if all dsc_all_bpp supported by HDMI2.1 sink + * Section 7.7.34 : Source shall not enable compressed Video + * Transport with bpp_target settings above 12 bpp unless + * DSC_all_bpp is set to 1. + */ + if (!hdmi_all_bpp) + max_dsc_bpp = min(max_dsc_bpp, 12); + + /* + * The Sink has a limit of compressed data in bytes for a scanline, + * as described in max_chunk_bytes field in HFVSDB block of edid. + * The no. of bytes depend on the target bits per pixel that the + * source configures. So we start with the max_bpp and calculate + * the target_chunk_bytes. We keep on decrementing the target_bpp, + * till we get the target_chunk_bytes just less than what the sink's + * max_chunk_bytes, or else till we reach the min_dsc_bpp. + * + * The decrement is according to the fractional support from PCON DSC + * encoder. For fractional BPP we use bpp_target as a multiple of 16. + * + * bpp_target_x16 = bpp_target * 16 + * So we need to decrement by {1, 2, 4, 8, 16} for fractional bpps + * {1/16, 1/8, 1/4, 1/2, 1} respectively. + */ + + bpp_target = max_dsc_bpp; + + /* src does not support fractional bpp implies decrement by 16 for bppx16 */ + if (!src_fractional_bpp) + src_fractional_bpp = 1; + bpp_decrement_x16 = DIV_ROUND_UP(16, src_fractional_bpp); + bpp_target_x16 = (bpp_target * 16) - bpp_decrement_x16; + + while (bpp_target_x16 > (min_dsc_bpp * 16)) { + int bpp; + + bpp = DIV_ROUND_UP(bpp_target_x16, 16); + target_bytes = DIV_ROUND_UP((num_slices * slice_width * bpp), 8); + if (target_bytes <= hdmi_max_chunk_bytes) { + bpp_found = true; + break; + } + bpp_target_x16 -= bpp_decrement_x16; + } + if (bpp_found) + return bpp_target_x16; + + return 0; +} diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.h b/drivers/gpu/drm/i915/display/intel_hdmi.h index 15eb0ccde76e..fa1a9b030850 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.h +++ b/drivers/gpu/drm/i915/display/intel_hdmi.h @@ -50,5 +50,12 @@ bool intel_hdmi_limited_color_range(const struct intel_crtc_state *crtc_state, const struct drm_connector_state *conn_state); bool intel_hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state, int bpc, bool has_hdmi_sink, bool ycbcr420_output); +int intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width, + int num_slices, int output_format, bool hdmi_all_bpp, + int hdmi_max_chunk_bytes); +int intel_hdmi_dsc_get_num_slices(const struct intel_crtc_state *crtc_state, + int src_max_slices, int src_max_slice_width, + int hdmi_max_slices, int hdmi_throughput); +int intel_hdmi_dsc_get_slice_height(int vactive);

#endif /* __INTEL_HDMI_H__ */

When a source supporting DSC1.1 is connected to DSC1.2 HDMI2.1 sink via DP HDMI2.1 PCON, the PCON can be configured to decode the DSC1.1 compressed stream and encode to DSC1.2. It then sends the DSC1.2 compressed stream to the HDMI2.1 sink.

This patch configures the PCON for DSC1.1 to DSC1.2 encoding, based on the PCON's DSC encoder capablities and HDMI2.1 sink's DSC decoder capabilities.

v2: Addressed review comments from Uma Shankar: -fixed the error in packing pps parameter values -added check for pcon in the pcon related function -appended display in commit message

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com --- drivers/gpu/drm/i915/display/intel_ddi.c | 1 + drivers/gpu/drm/i915/display/intel_dp.c | 117 ++++++++++++++++++++++- drivers/gpu/drm/i915/display/intel_dp.h | 2 + 3 files changed, 118 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 3ff8b18f1997..721a47bbc009 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3653,6 +3653,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, intel_dp_sink_set_fec_ready(intel_dp, crtc_state);

intel_dp_check_frl_training(intel_dp, crtc_state); + intel_dp_pcon_dsc_configure(intel_dp, crtc_state);

/* * 7.i Follow DisplayPort specification training sequence (see notes for diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 4dd272a34ee8..30c76ba63232 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -4039,9 +4039,21 @@ static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) { struct intel_connector *intel_connector = intel_dp->attached_connector; struct drm_connector *connector = &intel_connector->base; + int max_frl_rate; + int max_lanes, rate_per_lane; + int max_dsc_lanes, dsc_rate_per_lane;

- return (connector->display_info.hdmi.max_frl_rate_per_lane * - connector->display_info.hdmi.max_lanes); + max_lanes = connector->display_info.hdmi.max_lanes; + rate_per_lane = connector->display_info.hdmi.max_frl_rate_per_lane; + max_frl_rate = max_lanes * rate_per_lane; + + if (connector->display_info.hdmi.dsc_cap.v_1p2) { + max_dsc_lanes = connector->display_info.hdmi.dsc_cap.max_lanes; + dsc_rate_per_lane = connector->display_info.hdmi.dsc_cap.max_frl_rate_per_lane; + max_frl_rate = min(max_frl_rate, max_dsc_lanes * dsc_rate_per_lane); + } + + return max_frl_rate; }

static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp) @@ -4171,6 +4183,105 @@ void intel_dp_check_frl_training(struct intel_dp *intel_dp, } }

+static int +intel_dp_pcon_dsc_enc_slice_height(const struct intel_crtc_state *crtc_state) +{ + + int vactive = crtc_state->hw.adjusted_mode.vdisplay; + + return intel_hdmi_dsc_get_slice_height(vactive); +} + +static int +intel_dp_pcon_dsc_enc_slices(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_connector *connector = &intel_connector->base; + int hdmi_throughput = connector->display_info.hdmi.dsc_cap.clk_per_slice; + int hdmi_max_slices = connector->display_info.hdmi.dsc_cap.max_slices; + int pcon_max_slices = drm_dp_pcon_dsc_max_slices(intel_dp->pcon_dsc_dpcd); + int pcon_max_slice_width = drm_dp_pcon_dsc_max_slice_width(intel_dp->pcon_dsc_dpcd); + + + return intel_hdmi_dsc_get_num_slices(crtc_state, pcon_max_slices, + pcon_max_slice_width, + hdmi_max_slices, hdmi_throughput); +} + +static int +intel_dp_pcon_dsc_enc_bpp(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state, + int num_slices, int slice_width) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_connector *connector = &intel_connector->base; + int output_format = crtc_state->output_format; + bool hdmi_all_bpp = connector->display_info.hdmi.dsc_cap.all_bpp; + int pcon_fractional_bpp = drm_dp_pcon_dsc_bpp_incr(intel_dp->pcon_dsc_dpcd); + int hdmi_max_chunk_bytes = + connector->display_info.hdmi.dsc_cap.total_chunk_kbytes * 1024; + + return intel_hdmi_dsc_get_bpp(pcon_fractional_bpp, slice_width, + num_slices, output_format, hdmi_all_bpp, + hdmi_max_chunk_bytes); +} + +void +intel_dp_pcon_dsc_configure(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + u8 pps_param[6]; + int slice_height; + int slice_width; + int num_slices; + int bits_per_pixel; + int ret; + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + struct drm_connector *connector; + bool hdmi_is_dsc_1_2; + + if (!intel_dp_is_hdmi_2_1_sink(intel_dp)) + return; + + if (!intel_connector) + return; + connector = &intel_connector->base; + hdmi_is_dsc_1_2 = connector->display_info.hdmi.dsc_cap.v_1p2; + + if (!drm_dp_pcon_enc_is_dsc_1_2(intel_dp->pcon_dsc_dpcd) || + !hdmi_is_dsc_1_2) + return; + + slice_height = intel_dp_pcon_dsc_enc_slice_height(crtc_state); + if (!slice_height) + return; + + num_slices = intel_dp_pcon_dsc_enc_slices(intel_dp, crtc_state); + if (!num_slices) + return; + + slice_width = DIV_ROUND_UP(crtc_state->hw.adjusted_mode.hdisplay, + num_slices); + + bits_per_pixel = intel_dp_pcon_dsc_enc_bpp(intel_dp, crtc_state, + num_slices, slice_width); + if (!bits_per_pixel) + return; + + pps_param[0] = slice_height & 0xFF; + pps_param[1] = slice_height >> 8; + pps_param[2] = slice_width & 0xFF; + pps_param[3] = slice_width >> 8; + pps_param[4] = bits_per_pixel & 0xFF; + pps_param[5] = (bits_per_pixel >> 8) & 0x3; + + ret = drm_dp_pcon_pps_override_param(&intel_dp->aux, pps_param); + if (ret < 0) + drm_dbg_kms(&i915->drm, "Failed to set pcon DSC\n"); +} + static void g4x_set_link_train(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, @@ -4302,6 +4413,7 @@ static void intel_enable_dp(struct intel_atomic_state *state, intel_dp_set_power(intel_dp, DP_SET_POWER_D0); intel_dp_configure_protocol_converter(intel_dp); intel_dp_check_frl_training(intel_dp, pipe_config); + intel_dp_pcon_dsc_configure(intel_dp, pipe_config); intel_dp_start_link_train(intel_dp, pipe_config); intel_dp_stop_link_train(intel_dp, pipe_config);

@@ -6261,6 +6373,7 @@ int intel_dp_retrain_link(struct intel_encoder *encoder, continue;

intel_dp_check_frl_training(intel_dp, crtc_state); + intel_dp_pcon_dsc_configure(intel_dp, crtc_state); intel_dp_start_link_train(intel_dp, crtc_state); intel_dp_stop_link_train(intel_dp, crtc_state); break; diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h index b4a14646caea..9bba920b8197 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.h +++ b/drivers/gpu/drm/i915/display/intel_dp.h @@ -146,5 +146,7 @@ void intel_dp_sync_state(struct intel_encoder *encoder,

void intel_dp_check_frl_training(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state); +void intel_dp_pcon_dsc_configure(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state);

#endif /* __INTEL_DP_H__ */

If PCON has capability to convert RGB->YUV colorspace and also to 444->420 downsampling then for any YUV420 only mode, we can let the PCON do all the conversion.

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com --- .../drm/i915/display/intel_display_types.h | 1 + drivers/gpu/drm/i915/display/intel_dp.c | 37 +++++++++++++------ 2 files changed, 26 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index b41de41759a0..4150108bdc6d 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -1460,6 +1460,7 @@ struct intel_dp { int pcon_max_frl_bw, sink_max_frl_bw; u8 max_bpc; bool ycbcr_444_to_420; + bool rgb_to_ycbcr; } dfp;

/* Display stream compression testing */ diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 30c76ba63232..b3f1190d8150 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -651,6 +651,10 @@ intel_dp_output_format(struct drm_connector *connector, !drm_mode_is_420_only(info, mode)) return INTEL_OUTPUT_FORMAT_RGB;

+ if (intel_dp->dfp.rgb_to_ycbcr && + intel_dp->dfp.ycbcr_444_to_420) + return INTEL_OUTPUT_FORMAT_RGB; + if (intel_dp->dfp.ycbcr_444_to_420) return INTEL_OUTPUT_FORMAT_YCBCR444; else @@ -4365,13 +4369,12 @@ void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp) "Failed to set protocol converter YCbCr 4:2:0 conversion mode to %s\n", enableddisabled(intel_dp->dfp.ycbcr_444_to_420));

- tmp = 0; - - if (drm_dp_dpcd_writeb(&intel_dp->aux, - DP_PROTOCOL_CONVERTER_CONTROL_2, tmp) <= 0) + tmp = intel_dp->dfp.rgb_to_ycbcr ? + DP_CONVERSION_BT601_RGB_YCBCR_ENABLE : 0; + if (drm_dp_pcon_convert_rgb_to_ycbcr(&intel_dp->aux, tmp) <= 0) drm_dbg_kms(&i915->drm, - "Failed to set protocol converter YCbCr 4:2:2 conversion mode to %s\n", - enableddisabled(false)); + "Failed to set protocol converter RGB->YCbCr conversion mode to %s\n", + enableddisabled(intel_dp->dfp.rgb_to_ycbcr)); }

static void intel_enable_dp(struct intel_atomic_state *state, @@ -6897,7 +6900,7 @@ intel_dp_update_420(struct intel_dp *intel_dp) { struct drm_i915_private *i915 = dp_to_i915(intel_dp); struct intel_connector *connector = intel_dp->attached_connector; - bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420; + bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420, rgb_to_ycbcr;

/* No YCbCr output support on gmch platforms */ if (HAS_GMCH(i915)) @@ -6919,14 +6922,23 @@ intel_dp_update_420(struct intel_dp *intel_dp) dp_to_dig_port(intel_dp)->lspcon.active || drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd, intel_dp->downstream_ports); + rgb_to_ycbcr = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, + intel_dp->downstream_ports);

if (INTEL_GEN(i915) >= 11) { + /* Let PCON convert from RGB->YCbCr if possible */ + if (is_branch && rgb_to_ycbcr && ycbcr_444_to_420) { + intel_dp->dfp.rgb_to_ycbcr = true; + intel_dp->dfp.ycbcr_444_to_420 = true; + connector->base.ycbcr_420_allowed = true; + } else { /* Prefer 4:2:0 passthrough over 4:4:4->4:2:0 conversion */ - intel_dp->dfp.ycbcr_444_to_420 = - ycbcr_444_to_420 && !ycbcr_420_passthrough; + intel_dp->dfp.ycbcr_444_to_420 = + ycbcr_444_to_420 && !ycbcr_420_passthrough;

- connector->base.ycbcr_420_allowed = - !is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough; + connector->base.ycbcr_420_allowed = + !is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough; + } } else { /* 4:4:4->4:2:0 conversion is the only way */ intel_dp->dfp.ycbcr_444_to_420 = ycbcr_444_to_420; @@ -6935,8 +6947,9 @@ intel_dp_update_420(struct intel_dp *intel_dp) }

drm_dbg_kms(&i915->drm, - "[CONNECTOR:%d:%s] YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", + "[CONNECTOR:%d:%s] RGB->YcbCr conversion? %s, YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", connector->base.base.id, connector->base.name, + yesno(intel_dp->dfp.rgb_to_ycbcr), yesno(connector->base.ycbcr_420_allowed), yesno(intel_dp->dfp.ycbcr_444_to_420)); }