Provide a helper to set both the DMA and coherent DMA masks to the same value - this avoids duplicated code in a number of drivers, sometimes with buggy error handling, and also allows us identify which drivers do things differently.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- Documentation/DMA-API-HOWTO.txt | 37 ++++++++++++++++++++++--------------- Documentation/DMA-API.txt | 8 ++++++++ include/linux/dma-mapping.h | 14 ++++++++++++++ 3 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt index 14129f1..5e98303 100644 --- a/Documentation/DMA-API-HOWTO.txt +++ b/Documentation/DMA-API-HOWTO.txt @@ -101,14 +101,23 @@ style to do this even if your device holds the default setting, because this shows that you did think about these issues wrt. your device.

-The query is performed via a call to dma_set_mask(): +The query is performed via a call to dma_set_mask_and_coherent():

- int dma_set_mask(struct device *dev, u64 mask); + int dma_set_mask_and_coherent(struct device *dev, u64 mask);

-The query for consistent allocations is performed via a call to -dma_set_coherent_mask(): +which will query the mask for both streaming and coherent APIs together. +If you have some special requirements, then the following two separate +queries can be used instead:

- int dma_set_coherent_mask(struct device *dev, u64 mask); + The query for streaming mappings is performed via a call to + dma_set_mask(): + + int dma_set_mask(struct device *dev, u64 mask); + + The query for consistent allocations is performed via a call + to dma_set_coherent_mask(): + + int dma_set_coherent_mask(struct device *dev, u64 mask);

Here, dev is a pointer to the device struct of your device, and mask is a bit mask describing which bits of an address your device @@ -137,7 +146,7 @@ exactly why.

The standard 32-bit addressing device would do something like this:

- if (dma_set_mask(dev, DMA_BIT_MASK(32))) { + if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) { printk(KERN_WARNING "mydev: No suitable DMA available.\n"); goto ignore_this_device; @@ -171,22 +180,20 @@ If a card is capable of using 64-bit consistent allocations as well,

int using_dac, consistent_using_dac;

- if (!dma_set_mask(dev, DMA_BIT_MASK(64))) { + if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) { using_dac = 1; consistent_using_dac = 1; - dma_set_coherent_mask(dev, DMA_BIT_MASK(64)); - } else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) { + } else if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) { using_dac = 0; consistent_using_dac = 0; - dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); } else { printk(KERN_WARNING "mydev: No suitable DMA available.\n"); goto ignore_this_device; }

-dma_set_coherent_mask() will always be able to set the same or a -smaller mask as dma_set_mask(). However for the rare case that a +The coherent coherent mask will always be able to set the same or a +smaller mask as the streaming mask. However for the rare case that a device driver only uses consistent allocations, one would have to check the return value from dma_set_coherent_mask().

@@ -199,9 +206,9 @@ Finally, if your device can only drive the low 24-bits of goto ignore_this_device; }

-When dma_set_mask() is successful, and returns zero, the kernel saves -away this mask you have provided. The kernel will use this -information later when you make DMA mappings. +When dma_set_mask() or dma_set_mask_and_coherent() is successful, and +returns zero, the kernel saves away this mask you have provided. The +kernel will use this information later when you make DMA mappings.

There is a case which we are aware of at this time, which is worth mentioning in this documentation. If your device supports multiple diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index 78a6c56..e865279 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -142,6 +142,14 @@ internal API for use by the platform than an external API for use by driver writers.

int +dma_set_mask_and_coherent(struct device *dev, u64 mask) + +Checks to see if the mask is possible and updates the device +streaming and coherent DMA mask parameters if it is. + +Returns: 0 if successful and a negative error if not. + +int dma_set_mask(struct device *dev, u64 mask)

Checks to see if the mask is possible and updates the device diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 3a8d0a2..ec951f9 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -97,6 +97,20 @@ static inline int dma_set_coherent_mask(struct device *dev, u64 mask) } #endif

+/* + * Set both the DMA mask and the coherent DMA mask to the same thing. + * Note that we don't check the return value from dma_set_coherent_mask() + * as the DMA API guarantees that the coherent DMA mask can be set to + * the same or smaller than the streaming DMA mask. + */ +static inline int dma_set_mask_and_coherent(struct device *dev, u64 mask) +{ + int rc = dma_set_mask(dev, mask); + if (rc == 0) + dma_set_coherent_mask(dev, mask); + return rc; +} + extern u64 dma_get_required_mask(struct device *dev);

static inline unsigned int dma_get_max_seg_size(struct device *dev)

The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/ethernet/intel/e1000e/netdev.c | 18 ++++++------------ 1 files changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e87e9b0..519e293 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6553,21 +6553,15 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return err;

pci_using_dac = 0; - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; + pci_using_dac = 1; } else { - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - err = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); - if (err) { - dev_err(&pdev->dev, - "No usable DMA configuration, aborting\n"); - goto err_dma; - } + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); + goto err_dma; } }

The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/ethernet/intel/igb/igb_main.c | 18 ++++++------------ 1 files changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 8cf44f2..7579383 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2034,21 +2034,15 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return err;

pci_using_dac = 0; - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; + pci_using_dac = 1; } else { - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - err = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); - if (err) { - dev_err(&pdev->dev, - "No usable DMA configuration, aborting\n"); - goto err_dma; - } + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); + goto err_dma; } }

The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA " "configuration, aborting\n"); goto err_dma; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/ethernet/intel/igbvf/netdev.c | 18 ++++++------------ 1 files changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 93eb7ee..4e6b02f 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2638,21 +2638,15 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return err;

pci_using_dac = 0; - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; + pci_using_dac = 1; } else { - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - err = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); - if (err) { - dev_err(&pdev->dev, "No usable DMA " - "configuration, aborting\n"); - goto err_dma; - } + dev_err(&pdev->dev, "No usable DMA " + "configuration, aborting\n"); + goto err_dma; } }

The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { pr_err("No usable DMA configuration, aborting\n"); goto err_dma_mask; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 16 +++++----------- 1 files changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index 9f6b236..57e390c 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -408,20 +408,14 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return err;

pci_using_dac = 0; - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; + pci_using_dac = 1; } else { - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - err = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); - if (err) { - pr_err("No usable DMA configuration, aborting\n"); - goto err_dma_mask; - } + pr_err("No usable DMA configuration, aborting\n"); + goto err_dma_mask; } }

The fallback to 32-bit DMA mask is rather odd: if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } pci_using_dac = 0; } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 15 +++++---------- 1 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 7aba452..b1dc844 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7475,19 +7475,14 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) return err;

- if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && - !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { + if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { pci_using_dac = 1; } else { - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - err = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); - if (err) { - dev_err(&pdev->dev, - "No usable DMA configuration, aborting\n"); - goto err_dma; - } + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); + goto err_dma; } pci_using_dac = 0; }

The fallback to 32-bit DMA mask is rather odd: if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA " "configuration, aborting\n"); goto err_dma; } } pci_using_dac = 0; } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 15 +++++---------- 1 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 59a62bb..e34c2da 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -3326,19 +3326,14 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) return err;

- if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && - !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { + if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { pci_using_dac = 1; } else { - err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) { - err = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); - if (err) { - dev_err(&pdev->dev, "No usable DMA " - "configuration, aborting\n"); - goto err_dma; - } + dev_err(&pdev->dev, "No usable DMA " + "configuration, aborting\n"); + goto err_dma; } pci_using_dac = 0; }

Replace the following sequence:

dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);

with a call to the new helper dma_set_mask_and_coherent().

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/ethernet/broadcom/b44.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 9b017d9..b4d2018 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -2183,8 +2183,7 @@ static int b44_init_one(struct ssb_device *sdev, goto err_out_free_dev; }

- if (dma_set_mask(sdev->dma_dev, DMA_BIT_MASK(30)) || - dma_set_coherent_mask(sdev->dma_dev, DMA_BIT_MASK(30))) { + if (dma_set_mask_and_coherent(sdev->dma_dev, DMA_BIT_MASK(30))) { dev_err(sdev->dev, "Required 30BIT DMA mask unsupported by the system\n"); goto err_out_powerdown;

Replace the following sequence:

dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);

with a call to the new helper dma_set_mask_and_coherent().

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/ethernet/emulex/benet/be_main.c | 12 ++---------- 1 files changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 3224d28..2084151 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4335,19 +4335,11 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) adapter->netdev = netdev; SET_NETDEV_DEV(netdev, &pdev->dev);

- status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + status = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (!status) { - status = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - if (status < 0) { - dev_err(&pdev->dev, "dma_set_coherent_mask failed\n"); - goto free_netdev; - } netdev->features |= NETIF_F_HIGHDMA; } else { - status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (!status) - status = dma_set_coherent_mask(&pdev->dev, - DMA_BIT_MASK(32)); + status = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (status) { dev_err(&pdev->dev, "Could not set PCI DMA Mask\n"); goto free_netdev;

Replace the following sequence:

dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);

with a call to the new helper dma_set_mask_and_coherent().

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/wireless/b43/dma.c | 9 +++------ 1 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index c51d2dc..1d7982a 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1065,12 +1065,9 @@ static int b43_dma_set_mask(struct b43_wldev *dev, u64 mask) /* Try to set the DMA mask. If it fails, try falling back to a * lower mask, as we can always also support a lower one. */ while (1) { - err = dma_set_mask(dev->dev->dma_dev, mask); - if (!err) { - err = dma_set_coherent_mask(dev->dev->dma_dev, mask); - if (!err) - break; - } + err = dma_set_mask_and_coherent(dev->dev->dma_dev, mask); + if (!err) + break; if (mask == DMA_BIT_MASK(64)) { mask = DMA_BIT_MASK(32); fallback = true;

Replace the following sequence:

dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);

with a call to the new helper dma_set_mask_and_coherent().

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- arch/powerpc/kernel/vio.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 78a3506..96b6c97 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -1413,8 +1413,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)

/* needed to ensure proper operation of coherent allocations * later, in case driver doesn't set it explicitly */ - dma_set_mask(&viodev->dev, DMA_BIT_MASK(64)); - dma_set_coherent_mask(&viodev->dev, DMA_BIT_MASK(64)); + dma_set_mask_and_coherent(&viodev->dev, DMA_BIT_MASK(64)); }

/* register with generic device framework */

Replace the following sequence:

dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);

with a call to the new helper dma_set_mask_and_coherent().

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/block/nvme-core.c | 10 ++++------ 1 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index da52092..26d03fa 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -1949,12 +1949,9 @@ static int nvme_dev_map(struct nvme_dev *dev) if (pci_request_selected_regions(pdev, bars, "nvme")) goto disable_pci;

- if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); - else - goto disable_pci; + if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) && + dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) + goto disable;

pci_set_drvdata(pdev, dev); dev->bar = ioremap(pci_resource_start(pdev, 0), 8192); @@ -2168,6 +2165,7 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id)

INIT_LIST_HEAD(&dev->namespaces); dev->pci_dev = pdev; + result = nvme_set_instance(dev); if (result) goto free;

Replace the following sequence:

dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);

with a call to the new helper dma_set_mask_and_coherent().

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/staging/media/dt3155v4l/dt3155v4l.c | 5 +---- 1 files changed, 1 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/dt3155v4l/dt3155v4l.c b/drivers/staging/media/dt3155v4l/dt3155v4l.c index 90d6ac4..081407b 100644 --- a/drivers/staging/media/dt3155v4l/dt3155v4l.c +++ b/drivers/staging/media/dt3155v4l/dt3155v4l.c @@ -901,10 +901,7 @@ dt3155_probe(struct pci_dev *pdev, const struct pci_device_id *id) int err; struct dt3155_priv *pd;

- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (err) - return -ENODEV; - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) return -ENODEV; pd = kzalloc(sizeof(*pd), GFP_KERNEL);

Replace the following sequence:

dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask);

with a call to the new helper dma_set_mask_and_coherent().

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/usb/host/bcma-hcd.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c index df13d42..205f4a3 100644 --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -227,8 +227,7 @@ static int bcma_hcd_probe(struct bcma_device *dev)

/* TODO: Probably need checks here; is the core connected? */

- if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || - dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) return -EOPNOTSUPP;

usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);

AMBA Primecell devices always treat streaming and coherent DMA exactly the same, so there's no point in having the masks separated.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/amba/bus.c | 6 +----- drivers/of/platform.c | 3 --- include/linux/amba/bus.h | 2 -- 3 files changed, 1 insertions(+), 10 deletions(-)

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index c670727..c4876ac 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -552,7 +552,6 @@ amba_aphb_device_add(struct device *parent, const char *name, if (!dev) return ERR_PTR(-ENOMEM);

- dev->dma_mask = dma_mask; dev->dev.coherent_dma_mask = dma_mask; dev->irq[0] = irq1; dev->irq[1] = irq2; @@ -619,7 +618,7 @@ static void amba_device_initialize(struct amba_device *dev, const char *name) dev_set_name(&dev->dev, "%s", name); dev->dev.release = amba_device_release; dev->dev.bus = &amba_bustype; - dev->dev.dma_mask = &dev->dma_mask; + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; dev->res.name = dev_name(&dev->dev); }

@@ -663,9 +662,6 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) amba_device_initialize(dev, dev->dev.init_name); dev->dev.init_name = NULL;

- if (!dev->dev.coherent_dma_mask && dev->dma_mask) - dev_warn(&dev->dev, "coherent dma mask is unset\n"); - return amba_device_add(dev, parent); }

diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 9b439ac..54382ba 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -284,9 +284,6 @@ static struct amba_device *of_amba_device_create(struct device_node *node, else of_device_make_bus_id(&dev->dev);

- /* setup amba-specific device info */ - dev->dma_mask = ~0; - /* Allow the HW Peripheral ID to be overridden */ prop = of_get_property(node, "arm,primecell-periphid", NULL); if (prop) diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 43ec7e2..682df0e 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -30,7 +30,6 @@ struct amba_device { struct device dev; struct resource res; struct clk *pclk; - u64 dma_mask; unsigned int periphid; unsigned int irq[AMBA_NR_IRQS]; }; @@ -131,7 +130,6 @@ struct amba_device name##_device = { \ struct amba_device name##_device = { \ .dev = __AMBA_DEV(busid, data, ~0ULL), \ .res = DEFINE_RES_MEM(base, SZ_4K), \ - .dma_mask = ~0ULL, \ .irq = irqs, \ .periphid = id, \ }

The DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL08x driver.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/dma/amba-pl08x.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index fce46c5..e51a983 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -2055,6 +2055,11 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) if (ret) return ret;

+ /* Ensure that we can do DMA */ + ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32)); + if (ret) + goto out_no_pl08x; + /* Create the driver state holder */ pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL); if (!pl08x) {

The DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL08x driver.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/dma/pl330.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index a562d24..df8b10f 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2903,6 +2903,10 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)

pdat = dev_get_platdata(&adev->dev);

+ ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + /* Allocate a new DMAC and its Channels */ pdmac = devm_kzalloc(&adev->dev, sizeof(*pdmac), GFP_KERNEL); if (!pdmac) {

The DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL08x driver.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/video/amba-clcd.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 0a2cce7..afe4702 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -10,6 +10,7 @@ * * ARM PrimeCell PL110 Color LCD Controller */ +#include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> @@ -551,6 +552,10 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) if (!board) return -EINVAL;

+ ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); + if (ret) + goto out; + ret = amba_request_regions(dev, NULL); if (ret) { printk(KERN_ERR "CLCD: unable to reserve regs region\n");

Many drivers contain code such as:

dev->dma_mask = &dev->coherent_dma_mask; dev->coherent_dma_mask = MASK;

Let's move this pattern out of drivers and have the DMA API provide a helper for it. This helper uses dma_set_mask_and_coherent() to allow platform issues to be properly dealt with via dma_set_mask()/ dma_is_supported().

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- include/linux/dma-mapping.h | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index ec951f9..27d1421 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -111,6 +111,16 @@ static inline int dma_set_mask_and_coherent(struct device *dev, u64 mask) return rc; }

+/* + * Similar to the above, except it deals with the case where the device + * does not have dev->dma_mask appropriately setup. + */ +static inline int dma_coerce_mask_and_coherent(struct device *dev, u64 mask) +{ + dev->dma_mask = &dev->coherent_dma_mask; + return dma_set_mask_and_coherent(dev, mask); +} + extern u64 dma_get_required_mask(struct device *dev);

static inline unsigned int dma_get_max_seg_size(struct device *dev)

The code sequence: isp->raw_dmamask = DMA_BIT_MASK(32); isp->dev->dma_mask = &isp->raw_dmamask; isp->dev->coherent_dma_mask = DMA_BIT_MASK(32); bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/media/platform/omap3isp/isp.c | 6 +++--- drivers/media/platform/omap3isp/isp.h | 3 --- 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index df3a0ec..1c36080 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -2182,9 +2182,9 @@ static int isp_probe(struct platform_device *pdev) isp->pdata = pdata; isp->ref_count = 0;

- isp->raw_dmamask = DMA_BIT_MASK(32); - isp->dev->dma_mask = &isp->raw_dmamask; - isp->dev->coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(isp->dev, DMA_BIT_MASK(32)); + if (ret) + return ret;

platform_set_drvdata(pdev, isp);

diff --git a/drivers/media/platform/omap3isp/isp.h b/drivers/media/platform/omap3isp/isp.h index cd3eff4..ce65d3a 100644 --- a/drivers/media/platform/omap3isp/isp.h +++ b/drivers/media/platform/omap3isp/isp.h @@ -152,7 +152,6 @@ struct isp_xclk { * @mmio_base_phys: Array with physical L4 bus addresses for ISP register * regions. * @mmio_size: Array with ISP register regions size in bytes. - * @raw_dmamask: Raw DMA mask * @stat_lock: Spinlock for handling statistics * @isp_mutex: Mutex for serializing requests to ISP. * @crashed: Bitmask of crashed entities (indexed by entity ID) @@ -190,8 +189,6 @@ struct isp_device { unsigned long mmio_base_phys[OMAP3_ISP_IOMEM_LAST]; resource_size_t mmio_size[OMAP3_ISP_IOMEM_LAST];

- u64 raw_dmamask; - /* ISP Obj */ spinlock_t stat_lock; /* common lock for statistic drivers */ struct mutex isp_mutex; /* For handling ref_count field */

The code sequence: dev->dma_mask = &dev->coherent_dma_mask; dev->coherent_dma_mask = dma_mask; bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/mmc/host/sdhci-acpi.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index cdd4ce0..ef19874 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -310,8 +310,9 @@ static int sdhci_acpi_probe(struct platform_device *pdev) dma_mask = DMA_BIT_MASK(32); }

- dev->dma_mask = &dev->coherent_dma_mask; - dev->coherent_dma_mask = dma_mask; + err = dma_coerce_mask_and_coherent(dev, dma_mask); + if (err) + goto err_free; }

if (c->slot) {

The code sequence: pdev->dev.coherent_dma_mask = DMA_BIT_MASK(64); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; bypasses the architectures check on the DMA mask. It can be replaced with dma_coerce_mask_and_coherent(), avoiding the direct initialization of this mask.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/net/ethernet/octeon/octeon_mgmt.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c index 622aa75..2006a07 100644 --- a/drivers/net/ethernet/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/octeon/octeon_mgmt.c @@ -1552,8 +1552,9 @@ static int octeon_mgmt_probe(struct platform_device *pdev)

p->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);

- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(64); - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + result = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (result) + goto err;

netif_carrier_off(netdev); result = register_netdev(netdev);

The correct way for a driver to specify the coherent DMA mask is not to directly access the field in the struct device, but to use dma_set_coherent_mask(). Only arch and bus code should access this member directly.

Convert all direct write accesses to using the correct API.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/usb/chipidea/ci_hdrc_imx.c | 5 +++-- drivers/usb/dwc3/dwc3-exynos.c | 5 +++-- drivers/usb/gadget/lpc32xx_udc.c | 4 +++- drivers/usb/host/ehci-atmel.c | 5 +++-- drivers/usb/host/ehci-octeon.c | 4 +++- drivers/usb/host/ehci-omap.c | 8 +++++--- drivers/usb/host/ehci-orion.c | 5 +++-- drivers/usb/host/ehci-platform.c | 7 ++++--- drivers/usb/host/ehci-s5p.c | 5 +++-- drivers/usb/host/ehci-spear.c | 5 +++-- drivers/usb/host/ehci-tegra.c | 5 +++-- drivers/usb/host/ohci-at91.c | 7 ++++--- drivers/usb/host/ohci-exynos.c | 5 +++-- drivers/usb/host/ohci-nxp.c | 4 +++- drivers/usb/host/ohci-octeon.c | 4 +++- drivers/usb/host/ohci-omap3.c | 8 +++++--- drivers/usb/host/ohci-pxa27x.c | 6 ++++-- drivers/usb/host/ohci-spear.c | 5 +++-- drivers/usb/host/uhci-platform.c | 5 +++-- 19 files changed, 64 insertions(+), 38 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 74d998d..bf33bd3 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -123,8 +123,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)

if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + goto err_clk;

if (data->usbmisc_data) { ret = imx_usbmisc_init(data->usbmisc_data); diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 2f2e88a..c10b324 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -121,8 +121,9 @@ static int dwc3_exynos_probe(struct platform_device *pdev) */ if (!dev->dma_mask) dev->dma_mask = &dev->coherent_dma_mask; - if (!dev->coherent_dma_mask) - dev->coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); + if (ret) + goto err1;

platform_set_drvdata(pdev, exynos);

diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index 67128be..6a2a65a 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -3078,7 +3078,9 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) udc->isp1301_i2c_client->addr);

pdev->dev.dma_mask = &lpc32xx_usbd_dmamask; - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + goto resource_fail;

udc->board = &lpc32xx_usbddata;

diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 3b645ff..5831a88 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -92,8 +92,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + goto fail_create_hcd;

hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c index ab0397e..4c528b2 100644 --- a/drivers/usb/host/ehci-octeon.c +++ b/drivers/usb/host/ehci-octeon.c @@ -116,8 +116,10 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev) * We can DMA from anywhere. But the descriptors must be in * the lower 4GB. */ - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdev->dev.dma_mask = &ehci_octeon_dma_mask; + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret;

hcd = usb_create_hcd(&ehci_octeon_hc_driver, &pdev->dev, "octeon"); if (!hcd) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 78b01fa..d0759c5 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -104,7 +104,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) struct resource *res; struct usb_hcd *hcd; void __iomem *regs; - int ret = -ENODEV; + int ret; int irq; int i; struct omap_hcd *omap; @@ -146,9 +146,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) */ if (!dev->dma_mask) dev->dma_mask = &dev->coherent_dma_mask; - if (!dev->coherent_dma_mask) - dev->coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); + if (ret) + return ret;

+ ret = -ENODEV; hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, dev_name(dev)); if (!hcd) { diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index d1dfb9d..5870206 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -182,8 +182,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + goto err1;

if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index f6b790c..5b0cd2d 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -78,7 +78,7 @@ static int ehci_platform_probe(struct platform_device *dev) struct resource *res_mem; struct usb_ehci_pdata *pdata; int irq; - int err = -ENOMEM; + int err;

if (usb_disabled()) return -ENODEV; @@ -91,8 +91,9 @@ static int ehci_platform_probe(struct platform_device *dev) dev->dev.platform_data = &ehci_platform_defaults; if (!dev->dev.dma_mask) dev->dev.dma_mask = &dev->dev.coherent_dma_mask; - if (!dev->dev.coherent_dma_mask) - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + err = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); + if (err) + return err;

pdata = dev_get_platdata(&dev->dev);

diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 7c3de95..10d6a2e 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -91,8 +91,9 @@ static int s5p_ehci_probe(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + return err;

s5p_setup_vbus_gpio(pdev);

diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 1cf0adb..6839e15 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -83,8 +83,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + goto fail;

usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 78fa76d..3d9ee43 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -364,8 +364,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + return err;

hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index caa3764..eb7a2cb 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -524,7 +524,7 @@ MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); static int ohci_at91_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - int i, gpio; + int i, gpio, ret; enum of_gpio_flags flags; struct at91_usbh_data *pdata; u32 ports; @@ -538,8 +538,9 @@ static int ohci_at91_of_init(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret;

pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index dc6ee9a..ed685cb 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -116,8 +116,9 @@ static int exynos_ohci_probe(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + return err;

exynos_ohci = devm_kzalloc(&pdev->dev, sizeof(struct exynos_ohci_hcd), GFP_KERNEL); diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 7d7d507..5f82db4 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -226,8 +226,10 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) return -EPROBE_DEFER; }

- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + goto fail_disable;

dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); if (usb_disabled()) { diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c index 342dc7e..ac1dea1 100644 --- a/drivers/usb/host/ohci-octeon.c +++ b/drivers/usb/host/ohci-octeon.c @@ -127,8 +127,10 @@ static int ohci_octeon_drv_probe(struct platform_device *pdev) }

/* Ohci is a 32-bit device. */ - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret;

hcd = usb_create_hcd(&ohci_octeon_hc_driver, &pdev->dev, "octeon"); if (!hcd) diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index a09af26..664f5dc 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -132,7 +132,7 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) struct usb_hcd *hcd = NULL; void __iomem *regs = NULL; struct resource *res; - int ret = -ENODEV; + int ret; int irq;

if (usb_disabled()) @@ -168,9 +168,11 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) */ if (!dev->dma_mask) dev->dma_mask = &dev->coherent_dma_mask; - if (!dev->coherent_dma_mask) - dev->coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); + if (ret) + goto err_io;

+ ret = -ENODEV; hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, dev_name(dev)); if (!hcd) { diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 93371a2..74696ae 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -287,6 +287,7 @@ static int ohci_pxa_of_init(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct pxaohci_platform_data *pdata; u32 tmp; + int ret;

if (!np) return 0; @@ -297,8 +298,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret;

pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index cc9dd9e..195a0a1 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -113,8 +113,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + goto fail;

usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index d033a0e..048912d 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -77,8 +77,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev) */ if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret;

hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev, pdev->name);

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/usb/chipidea/ci_hdrc_imx.c | 4 +--- drivers/usb/dwc3/dwc3-exynos.c | 4 +--- drivers/usb/host/ehci-atmel.c | 4 +--- drivers/usb/host/ehci-omap.c | 4 +--- drivers/usb/host/ehci-orion.c | 4 +--- drivers/usb/host/ehci-platform.c | 5 ++--- drivers/usb/host/ehci-s5p.c | 4 +--- drivers/usb/host/ehci-spear.c | 4 +--- drivers/usb/host/ehci-tegra.c | 4 +--- drivers/usb/host/ohci-at91.c | 4 +--- drivers/usb/host/ohci-exynos.c | 4 +--- drivers/usb/host/ohci-nxp.c | 3 +-- drivers/usb/host/ohci-octeon.c | 3 +-- drivers/usb/host/ohci-omap3.c | 4 +--- drivers/usb/host/ohci-pxa27x.c | 4 +--- drivers/usb/host/ohci-spear.c | 4 +--- drivers/usb/host/uhci-platform.c | 4 +--- 17 files changed, 18 insertions(+), 49 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index bf33bd3..af731db 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -121,9 +121,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)

pdata.phy = data->phy;

- if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (ret) goto err_clk;

diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index c10b324..8b20c70 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -119,9 +119,7 @@ static int dwc3_exynos_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ - if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); + ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); if (ret) goto err1;

diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 5831a88..8e7323e 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -90,9 +90,7 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (retval) goto fail_create_hcd;

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index d0759c5..6fa82d6 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -144,9 +144,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); + ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); if (ret) return ret;

diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 5870206..2ba7673 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -180,9 +180,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) * set. Since shared usb code relies on it, set it here for * now. Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) goto err1;

diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 5b0cd2d..7f30b71 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -89,9 +89,8 @@ static int ehci_platform_probe(struct platform_device *dev) */ if (!dev_get_platdata(&dev->dev)) dev->dev.platform_data = &ehci_platform_defaults; - if (!dev->dev.dma_mask) - dev->dev.dma_mask = &dev->dev.coherent_dma_mask; - err = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); + + err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); if (err) return err;

diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 10d6a2e..d919ed4 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -89,9 +89,7 @@ static int s5p_ehci_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) return err;

diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 6839e15..ee6f9ff 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -81,9 +81,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (retval) goto fail;

diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 3d9ee43..e74aaf3 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -362,9 +362,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) return err;

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index eb7a2cb..36423db 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -536,9 +536,7 @@ static int ohci_at91_of_init(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (ret) return ret;

diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index ed685cb..866f246 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -114,9 +114,7 @@ static int exynos_ohci_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) return err;

diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 5f82db4..df3eb3e 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -226,8 +226,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) return -EPROBE_DEFER; }

- pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (ret) goto fail_disable;

diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c index ac1dea1..6c16dce 100644 --- a/drivers/usb/host/ohci-octeon.c +++ b/drivers/usb/host/ohci-octeon.c @@ -127,8 +127,7 @@ static int ohci_octeon_drv_probe(struct platform_device *pdev) }

/* Ohci is a 32-bit device. */ - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (ret) return ret;

diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index 664f5dc..db9bd6b 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -166,9 +166,7 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); + ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); if (ret) goto err_io;

diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 74696ae..b64949b 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -296,9 +296,7 @@ static int ohci_pxa_of_init(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (ret) return ret;

diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 195a0a1..075bb5e 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -111,9 +111,7 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (retval) goto fail;

diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index 048912d..f8548b7 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -75,9 +75,7 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (ret) return ret;

The correct way for a driver to specify the coherent DMA mask is not to directly access the field in the struct device, but to use dma_set_coherent_mask(). Only arch and bus code should access this member directly.

Convert all direct write accesses to using the correct API.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/staging/dwc2/platform.c | 5 +++-- drivers/staging/imx-drm/imx-drm-core.c | 8 ++++++-- drivers/staging/imx-drm/ipuv3-crtc.c | 4 +++- 3 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c index 44cce2f..1d68c49 100644 --- a/drivers/staging/dwc2/platform.c +++ b/drivers/staging/dwc2/platform.c @@ -100,8 +100,9 @@ static int dwc2_driver_probe(struct platform_device *dev) */ if (!dev->dev.dma_mask) dev->dev.dma_mask = &dev->dev.coherent_dma_mask; - if (!dev->dev.coherent_dma_mask) - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); + if (retval) + return retval;

irq = platform_get_irq(dev, 0); if (irq < 0) { diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c index 47c5888..847f430 100644 --- a/drivers/staging/imx-drm/imx-drm-core.c +++ b/drivers/staging/imx-drm/imx-drm-core.c @@ -805,6 +805,12 @@ static struct drm_driver imx_drm_driver = {

static int imx_drm_platform_probe(struct platform_device *pdev) { + int ret; + + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + imx_drm_device->dev = &pdev->dev;

return drm_platform_init(&imx_drm_driver, pdev); @@ -847,8 +853,6 @@ static int __init imx_drm_init(void) goto err_pdev; }

- imx_drm_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32), - ret = platform_driver_register(&imx_drm_pdrv); if (ret) goto err_pdrv; diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index 6fd37a7..9e73e8d 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -523,7 +523,9 @@ static int ipu_drm_probe(struct platform_device *pdev) if (!pdata) return -EINVAL;

- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret;

ipu_crtc = devm_kzalloc(&pdev->dev, sizeof(*ipu_crtc), GFP_KERNEL); if (!ipu_crtc)

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/crypto/ixp4xx_crypto.c | 13 ++++++++----- 1 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 8306185..214357e 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -221,7 +221,6 @@ static int support_aes = 1; #define DRIVER_NAME "ixp4xx_crypto"

static struct platform_device *pdev; -static struct device *dev;

static inline dma_addr_t crypt_virt2phys(struct crypt_ctl *virt) { @@ -250,6 +249,7 @@ static inline const struct ix_hash_algo *ix_hash(struct crypto_tfm *tfm)

static int setup_crypt_desc(void) { + struct device *dev = &pdev->dev; BUILD_BUG_ON(sizeof(struct crypt_ctl) != 64); crypt_virt = dma_alloc_coherent(dev, NPE_QLEN * sizeof(struct crypt_ctl), @@ -350,6 +350,7 @@ static void finish_scattered_hmac(struct crypt_ctl *crypt)

static void one_packet(dma_addr_t phys) { + struct device *dev = &pdev->dev; struct crypt_ctl *crypt; struct ixp_ctx *ctx; int failed; @@ -419,7 +420,7 @@ static void crypto_done_action(unsigned long arg) tasklet_schedule(&crypto_done_tasklet); }

-static int init_ixp_crypto(void) +static int init_ixp_crypto(struct device *dev) { int ret = -ENODEV; u32 msg[2] = { 0, 0 }; @@ -506,7 +507,7 @@ static int init_ixp_crypto(void) return ret; }

-static void release_ixp_crypto(void) +static void release_ixp_crypto(struct device *dev) { qmgr_disable_irq(RECV_QID); tasklet_kill(&crypto_done_tasklet); @@ -873,6 +874,7 @@ static int ablk_perform(struct ablkcipher_request *req, int encrypt) enum dma_data_direction src_direction = DMA_BIDIRECTIONAL; struct ablk_ctx *req_ctx = ablkcipher_request_ctx(req); struct buffer_desc src_hook; + struct device *dev = &pdev->dev; gfp_t flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL : GFP_ATOMIC;

@@ -997,6 +999,7 @@ static int aead_perform(struct aead_request *req, int encrypt, unsigned int cryptlen; struct buffer_desc *buf, src_hook; struct aead_ctx *req_ctx = aead_request_ctx(req); + struct device *dev = &pdev->dev; gfp_t flags = req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL : GFP_ATOMIC;

@@ -1426,7 +1429,7 @@ static int __init ixp_module_init(void) spin_lock_init(&desc_lock); spin_lock_init(&emerg_lock);

- err = init_ixp_crypto(); + err = init_ixp_crypto(&pdev->dev); if (err) { platform_device_unregister(pdev); return err; @@ -1492,7 +1495,7 @@ static void __exit ixp_module_exit(void) if (ixp4xx_algos[i].registered) crypto_unregister_alg(&ixp4xx_algos[i].crypto); } - release_ixp_crypto(); + release_ixp_crypto(&pdev->dev); platform_device_unregister(pdev); }

dcdbas was explicitly initializing DMA masks thusly: dcdbas_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask; which bypasses the architecture check. Moreover, it is creating the dcdbas_pdev device itself, and using the platform_device_register_full() avoids some of this explicit initialization.

Convert the driver to use platform_device_register_full(), and as it makes use of coherent DMA, also call dma_set_coherent_mask() to ensure that the architecture gets to check the mask.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/firmware/dcdbas.c | 23 ++++++++++++----------- 1 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c index ff080ee..a85fda2 100644 --- a/drivers/firmware/dcdbas.c +++ b/drivers/firmware/dcdbas.c @@ -549,8 +549,9 @@ static int dcdbas_probe(struct platform_device *dev) * BIOS SMI calls require buffer addresses be in 32-bit address space. * This is done by setting the DMA mask below. */ - dcdbas_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask; + error = dma_set_coherent_mask(&dcdbas_pdev->dev, DMA_BIT_MASK(32)); + if (error) + return error;

error = sysfs_create_group(&dev->dev.kobj, &dcdbas_attr_group); if (error) @@ -581,6 +582,12 @@ static struct platform_driver dcdbas_driver = { .remove = dcdbas_remove, };

+static const struct platform_device_info dcdbas_dev_info __initdata = { + .name = DRIVER_NAME, + .id = -1, + .dma_mask = DMA_BIT_MASK(32), +}; + /** * dcdbas_init: initialize driver */ @@ -592,20 +599,14 @@ static int __init dcdbas_init(void) if (error) return error;

- dcdbas_pdev = platform_device_alloc(DRIVER_NAME, -1); - if (!dcdbas_pdev) { - error = -ENOMEM; + dcdbas_pdev = platform_device_register_full(&dcdbas_dev_info); + if (IS_ERR(dcdbas_pdev)) { + error = PTR_ERR(dcdbas_pdev); goto err_unregister_driver; }

- error = platform_device_add(dcdbas_pdev); - if (error) - goto err_free_device; - return 0;

- err_free_device: - platform_device_put(dcdbas_pdev); err_unregister_driver: platform_driver_unregister(&dcdbas_driver); return error;

We need to start treating DMA masks as something which is specific to the bus that the device resides on, otherwise we're going to hit all sorts of nasty issues with LPAE and 32-bit DMA controllers in >32-bit systems, where memory is offset from PFN 0.

In order to start doing this, we convert the DMA mask to a PFN using the device specific dma_to_pfn() macro. This is the reverse of the pfn_to_dma() macro which is used to get the DMA address for the device.

This gives us a PFN mask, which we can then check against the PFN limit of the DMA zone.

Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- arch/arm/mm/dma-mapping.c | 49 ++++++++++++++++++++++++++++++++++++++++---- arch/arm/mm/init.c | 2 + arch/arm/mm/mm.h | 2 + 3 files changed, 48 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index f5e1a84..13d55e1 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -173,10 +173,30 @@ static u64 get_coherent_dma_mask(struct device *dev) return 0; }

- if ((~mask) & (u64)arm_dma_limit) { - dev_warn(dev, "coherent DMA mask %#llx is smaller " - "than system GFP_DMA mask %#llx\n", - mask, (u64)arm_dma_limit); + /* + * If the mask allows for more memory than we can address, + * and we actually have that much memory, then fail the + * allocation. + */ + if (sizeof(mask) != sizeof(dma_addr_t) && + mask > (dma_addr_t)~0 && + dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) { + dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n", + mask); + dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n"); + return 0; + } + + /* + * Now check that the mask, when translated to a PFN, + * fits within the allowable addresses which we can + * allocate. + */ + if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) { + dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n", + mask, + dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1, + arm_dma_pfn_limit + 1); return 0; } } @@ -1007,8 +1027,27 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, */ int dma_supported(struct device *dev, u64 mask) { - if (mask < (u64)arm_dma_limit) + unsigned long limit; + + /* + * If the mask allows for more memory than we can address, + * and we actually have that much memory, then we must + * indicate that DMA to this device is not supported. + */ + if (sizeof(mask) != sizeof(dma_addr_t) && + mask > (dma_addr_t)~0 && + dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) + return 0; + + /* + * Translate the device's DMA mask to a PFN limit. This + * PFN number includes the page which we can DMA to. + */ + limit = dma_to_pfn(dev, mask); + + if (limit < arm_dma_pfn_limit) return 0; + return 1; } EXPORT_SYMBOL(dma_supported); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index febaee7..8aab24f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -218,6 +218,7 @@ EXPORT_SYMBOL(arm_dma_zone_size); * so a successful GFP_DMA allocation will always satisfy this. */ phys_addr_t arm_dma_limit; +unsigned long arm_dma_pfn_limit;

static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole, unsigned long dma_size) @@ -240,6 +241,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc) arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1; } else arm_dma_limit = 0xffffffff; + arm_dma_pfn_limit = arm_dma_limit >> PAGE_SHIFT; #endif }

diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d5a4e9a..d5a982d 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -81,8 +81,10 @@ extern __init void add_static_vm_early(struct static_vm *svm);

#ifdef CONFIG_ZONE_DMA extern phys_addr_t arm_dma_limit; +extern unsigned long arm_dma_pfn_limit; #else #define arm_dma_limit ((phys_addr_t)~0) +#define arm_dma_pfn_limit (~0ul >> PAGE_SHIFT) #endif

extern phys_addr_t arm_lowmem_limit;

From: Santosh Shilimkar santosh.shilimkar@ti.com

Most of the kernel assumes that PFN0 is the start of the physical memory (RAM). This assumptions is not true on most of the ARM SOCs and hence and if one try to update the ARM port to follow the assumptions, we end of breaking the dma bounce limit for few block layer drivers. One such example is trying to unify the meaning of max*_pfn on ARM as the bootmem layer expects, breaks few block layer driver dma bounce limit.

To fix this problem, we introduce dma_max_pfn(dev) generic helper with a possibility of override from the architecture code. The helper converts a DMA bitmask of bits to a block PFN number. In all the generic cases, it is just "dev->dma_mask >> PAGE_SHIFT" and hence default behavior is maintained as is.

Subsequent patches will make use of the helper. No functional change.

Signed-off-by: Santosh Shilimkar santosh.shilimkar@ti.com Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- include/linux/dma-mapping.h | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 27d1421..fd4aee2 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -153,6 +153,13 @@ static inline int dma_set_seg_boundary(struct device *dev, unsigned long mask) return -EIO; }

+#ifndef dma_max_pfn +static inline unsigned long dma_max_pfn(struct device *dev) +{ + return *dev->dma_mask >> PAGE_SHIFT; +} +#endif + static inline void *dma_zalloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) {

From: Santosh Shilimkar santosh.shilimkar@ti.com

DMA bounce limit is the maximum direct DMA'able memory beyond which bounce buffers has to be used to perform dma operations. MMC queue layr relies on dma_mask but its calculation is based on max_*pfn which don't have uniform meaning across architectures. So make use of dma_max_pfn() which is expected to return the DMAable maximum pfn value across architectures.

Signed-off-by: Santosh Shilimkar santosh.shilimkar@ti.com Signed-off-by: Russell King rmk+kernel@arm.linux.org.uk --- drivers/mmc/card/queue.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index fa9632e..357bbc5 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -15,6 +15,7 @@ #include <linux/freezer.h> #include <linux/kthread.h> #include <linux/scatterlist.h> +#include <linux/dma-mapping.h>

#include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -196,7 +197,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];

if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask) - limit = *mmc_dev(host)->dma_mask; + limit = dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;

mq->card = card; mq->queue = blk_init_queue(mmc_request_fn, lock);