This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1: - Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org --- drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 109 +++++++++++++++++++++---- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 37 ++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 9 +- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 84 +++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 4 + 8 files changed, 233 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c index 7c230f7..e52bc44 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c @@ -29,6 +29,74 @@ enum dpu_perf_mode { DPU_PERF_MODE_MAX };
+/** + * @_dpu_core_perf_calc_bw() - to calculate BW per crtc + * @kms - pointer to the dpu_kms + * @crtc - pointer to a crtc + * Return: returns aggregated BW for all planes in crtc. + */ +static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms, + struct drm_crtc *crtc) +{ + struct drm_plane *plane; + struct dpu_plane_state *pstate; + u64 crtc_plane_bw = 0; + u32 bw_factor; + + drm_atomic_crtc_for_each_plane(plane, crtc) { + pstate = to_dpu_plane_state(plane->state); + if (!pstate) + continue; + + crtc_plane_bw += pstate->plane_fetch_bw; + } + + bw_factor = kms->catalog->perf.bw_inefficiency_factor; + if (bw_factor) { + crtc_plane_bw *= bw_factor; + do_div(crtc_plane_bw, 100); + } + + return crtc_plane_bw; +} + +/** + * _dpu_core_perf_calc_clk() - to calculate clock per crtc + * @kms - pointer to the dpu_kms + * @crtc - pointer to a crtc + * @state - pointer to a crtc state + * Return: returns max clk for all planes in crtc. + */ +static u64 _dpu_core_perf_calc_clk(struct dpu_kms *kms, + struct drm_crtc *crtc, struct drm_crtc_state *state) +{ + struct drm_plane *plane; + struct dpu_plane_state *pstate; + struct drm_display_mode *mode; + u64 crtc_clk; + u32 clk_factor; + + mode = &state->adjusted_mode; + + crtc_clk = mode->vtotal * mode->hdisplay * drm_mode_vrefresh(mode); + + drm_atomic_crtc_for_each_plane(plane, crtc) { + pstate = to_dpu_plane_state(plane->state); + if (!pstate) + continue; + + crtc_clk = max(pstate->plane_clk, crtc_clk); + } + + clk_factor = kms->catalog->perf.clk_inefficiency_factor; + if (clk_factor) { + crtc_clk *= clk_factor; + do_div(crtc_clk, 100); + } + + return crtc_clk; +} + static struct dpu_kms *_dpu_crtc_get_kms(struct drm_crtc *crtc) { struct msm_drm_private *priv; @@ -51,12 +119,7 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, dpu_cstate = to_dpu_crtc_state(state); memset(perf, 0, sizeof(struct dpu_core_perf_params));
- if (!dpu_cstate->bw_control) { - perf->bw_ctl = kms->catalog->perf.max_bw_high * - 1000ULL; - perf->max_per_pipe_ib = perf->bw_ctl; - perf->core_clk_rate = kms->perf.max_core_clk_rate; - } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { + if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { perf->bw_ctl = 0; perf->max_per_pipe_ib = 0; perf->core_clk_rate = 0; @@ -64,6 +127,10 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, perf->bw_ctl = kms->perf.fix_core_ab_vote; perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote; perf->core_clk_rate = kms->perf.fix_core_clk_rate; + } else { + perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc); + perf->max_per_pipe_ib = kms->catalog->perf.min_dram_ib; + perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state); }
DPU_DEBUG( @@ -115,11 +182,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", tmp_crtc->base.id, tmp_cstate->new_perf.bw_ctl, tmp_cstate->bw_control); - /* - * For bw check only use the bw if the - * atomic property has been already set - */ - if (tmp_cstate->bw_control) + bw_sum_of_intfs += tmp_cstate->new_perf.bw_ctl; }
@@ -131,9 +194,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
DPU_DEBUG("final threshold bw limit = %d\n", threshold);
- if (!dpu_cstate->bw_control) { - DPU_DEBUG("bypass bandwidth check\n"); - } else if (!threshold) { + if (!threshold) { DPU_ERROR("no bandwidth limits specified\n"); return -E2BIG; } else if (bw > threshold) { @@ -154,7 +215,11 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, = dpu_crtc_get_client_type(crtc); struct drm_crtc *tmp_crtc; struct dpu_crtc_state *dpu_cstate; - int ret = 0; + int i, ret = 0; + u64 avg_bw; + + if (!kms->num_paths) + return -EINVAL;
drm_for_each_crtc(tmp_crtc, crtc->dev) { if (tmp_crtc->enabled && @@ -165,10 +230,20 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, perf.max_per_pipe_ib = max(perf.max_per_pipe_ib, dpu_cstate->new_perf.max_per_pipe_ib);
- DPU_DEBUG("crtc=%d bw=%llu\n", tmp_crtc->base.id, - dpu_cstate->new_perf.bw_ctl); + perf.bw_ctl += dpu_cstate->new_perf.bw_ctl; + + DPU_DEBUG("crtc=%d bw=%llu paths:%d\n", + tmp_crtc->base.id, + dpu_cstate->new_perf.bw_ctl, kms->num_paths); } } + + avg_bw = perf.bw_ctl; + do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/ + + for (i = 0; i < kms->num_paths; i++) + icc_set_bw(kms->path[i], avg_bw, perf.max_per_pipe_ib); + return ret; }
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index 29d4fde..8f2357d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -541,7 +541,8 @@ .max_bw_high = 6800000, .min_core_ib = 2400000, .min_llcc_ib = 800000, - .min_dram_ib = 800000, + .min_dram_ib = 1600000, + .min_prefill_lines = 24, .danger_lut_tbl = {0xff, 0xffff, 0x0}, .qos_lut_tbl = { {.nentry = ARRAY_SIZE(sc7180_qos_linear), @@ -558,6 +559,8 @@ {.rd_enable = 1, .wr_enable = 1}, {.rd_enable = 1, .wr_enable = 0} }, + .clk_inefficiency_factor = 105, + .bw_inefficiency_factor = 120, };
/************************************************************* diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index f7de438..f2a5fe2 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -651,6 +651,8 @@ struct dpu_perf_cdp_cfg { * @downscaling_prefill_lines downscaling latency in lines * @amortizable_theshold minimum y position for traffic shaping prefill * @min_prefill_lines minimum pipeline latency in lines + * @clk_inefficiency_factor DPU src clock inefficiency factor + * @bw_inefficiency_factor DPU axi bus bw inefficiency factor * @safe_lut_tbl: LUT tables for safe signals * @danger_lut_tbl: LUT tables for danger signals * @qos_lut_tbl: LUT tables for QoS signals @@ -675,6 +677,8 @@ struct dpu_perf_cfg { u32 downscaling_prefill_lines; u32 amortizable_threshold; u32 min_prefill_lines; + u32 clk_inefficiency_factor; + u32 bw_inefficiency_factor; u32 safe_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; u32 danger_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; struct dpu_qos_lut_tbl qos_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index b8615d4..a5da7aa 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -303,6 +303,28 @@ static int dpu_kms_global_obj_init(struct dpu_kms *dpu_kms) return 0; }
+static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms) +{ + struct icc_path *path0; + struct icc_path *path1; + struct drm_device *dev = dpu_kms->dev; + + path0 = of_icc_get(dev->dev, "mdp0-mem"); + path1 = of_icc_get(dev->dev, "mdp1-mem"); + + if (IS_ERR_OR_NULL(path0)) + return PTR_ERR_OR_ZERO(path0); + + dpu_kms->path[0] = path0; + dpu_kms->num_paths = 1; + + if (!IS_ERR_OR_NULL(path1)) { + dpu_kms->path[1] = path1; + dpu_kms->num_paths++; + } + return 0; +} + static int dpu_kms_enable_vblank(struct msm_kms *kms, struct drm_crtc *crtc) { return dpu_crtc_vblank(crtc, true); @@ -972,6 +994,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
dpu_vbif_init_memtypes(dpu_kms);
+ if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss")) + dpu_kms_parse_data_bus_icc_path(dpu_kms); + pm_runtime_put_sync(&dpu_kms->pdev->dev);
return 0; @@ -1077,7 +1102,7 @@ static int dpu_dev_remove(struct platform_device *pdev)
static int __maybe_unused dpu_runtime_suspend(struct device *dev) { - int rc = -1; + int i, rc = -1; struct platform_device *pdev = to_platform_device(dev); struct dpu_kms *dpu_kms = platform_get_drvdata(pdev); struct dss_module_power *mp = &dpu_kms->mp; @@ -1086,6 +1111,9 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev) if (rc) DPU_ERROR("clock disable failed rc:%d\n", rc);
+ for (i = 0; i < dpu_kms->num_paths; i++) + icc_set_bw(dpu_kms->path[i], 0, 0); + return rc; }
@@ -1097,8 +1125,15 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct drm_encoder *encoder; struct drm_device *ddev; struct dss_module_power *mp = &dpu_kms->mp; + int i;
ddev = dpu_kms->dev; + + /* Min vote of BW is required before turning on AXI clk */ + for (i = 0; i < dpu_kms->num_paths; i++) + icc_set_bw(dpu_kms->path[i], 0, + dpu_kms->catalog->perf.min_dram_ib); + rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc); diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h index 4e32d04..94410ca 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h @@ -8,6 +8,8 @@ #ifndef __DPU_KMS_H__ #define __DPU_KMS_H__
+#include <linux/interconnect.h> + #include <drm/drm_drv.h>
#include "msm_drv.h" @@ -137,6 +139,8 @@ struct dpu_kms { * when disabled. */ atomic_t bandwidth_ref; + struct icc_path *path[2]; + u32 num_paths; };
struct vsync_info { diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 80d3cfc..df0a983 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -8,7 +8,6 @@ #include <linux/irqdesc.h> #include <linux/irqchip/chained_irq.h> #include "dpu_kms.h" -#include <linux/interconnect.h>
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
@@ -315,9 +314,11 @@ int dpu_mdss_init(struct drm_device *dev) } dpu_mdss->mmio_len = resource_size(res);
- ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss); - if (ret) - return ret; + if (!of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss")) { + ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss); + if (ret) + return ret; + }
mp = &dpu_mdss->mp; ret = msm_dss_parse_clock(pdev, mp); diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index 3b9c33e..6379fe1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -132,6 +132,86 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane) }
/** + * _dpu_plane_calc_bw - calculate bandwidth required for a plane + * @Plane: Pointer to drm plane. + * Result: Updates calculated bandwidth in the plane state. + * BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest) + * Prefill BW Equation: line src bytes * line_time + */ +static void _dpu_plane_calc_bw(struct drm_plane *plane, + struct drm_framebuffer *fb) +{ + struct dpu_plane *pdpu = to_dpu_plane(plane); + struct dpu_plane_state *pstate; + struct drm_display_mode *mode; + const struct dpu_format *fmt = NULL; + struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane); + int src_width, src_height, dst_height, fps; + u64 plane_prefill_bw; + u64 plane_bw; + u32 hw_latency_lines; + u64 scale_factor; + int vbp, vpw; + + pstate = to_dpu_plane_state(plane->state); + mode = &plane->state->crtc->mode; + + fmt = dpu_get_dpu_format_ext(fb->format->format, fb->modifier); + + src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect); + src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect); + dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect); + fps = drm_mode_vrefresh(mode); + vbp = mode->vtotal - mode->vsync_end; + vpw = mode->vsync_end - mode->vsync_start; + hw_latency_lines = dpu_kms->catalog->perf.min_prefill_lines; + scale_factor = src_height > dst_height ? + mult_frac(src_height, 1, dst_height) : 1; + + plane_bw = + src_width * mode->vtotal * fps * fmt->bpp * + scale_factor; + + plane_prefill_bw = + src_width * hw_latency_lines * fps * fmt->bpp * + scale_factor * mode->vtotal; + + do_div(plane_prefill_bw, (vbp+vpw)); + + pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw); +} + +/** + * _dpu_plane_calc_clk - calculate clock required for a plane + * @Plane: Pointer to drm plane. + * Result: Updates calculated clock in the plane state. + * Clock equation: dst_w * v_total * fps * (src_h / dst_h) + */ +static void _dpu_plane_calc_clk(struct drm_plane *plane) +{ + struct dpu_plane *pdpu = to_dpu_plane(plane); + struct dpu_plane_state *pstate; + struct drm_display_mode *mode; + int dst_width, src_height, dst_height, fps; + + pstate = to_dpu_plane_state(plane->state); + mode = &plane->state->crtc->mode; + + src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect); + dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect); + dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect); + fps = drm_mode_vrefresh(mode); + + pstate->plane_clk = + dst_width * mode->vtotal * fps; + + if (src_height > dst_height) { + pstate->plane_clk *= src_height; + do_div(pstate->plane_clk, dst_height); + } +} + +/** * _dpu_plane_calc_fill_level - calculate fill level of the given source format * @plane: Pointer to drm plane * @fmt: Pointer to source buffer format @@ -1102,6 +1182,10 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) }
_dpu_plane_set_qos_remap(plane); + + _dpu_plane_calc_bw(plane, fb); + + _dpu_plane_calc_clk(plane); }
static void _dpu_plane_atomic_disable(struct drm_plane *plane) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h index 4569497..ca83b87 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h @@ -25,6 +25,8 @@ * @scaler3_cfg: configuration data for scaler3 * @pixel_ext: configuration data for pixel extensions * @cdp_cfg: CDP configuration + * @plane_fetch_bw: calculated BW per plane + * @plane_clk: calculated clk per plane */ struct dpu_plane_state { struct drm_plane_state base; @@ -39,6 +41,8 @@ struct dpu_plane_state { struct dpu_hw_pixel_ext pixel_ext;
struct dpu_hw_pipe_cdp_cfg cdp_cfg; + u64 plane_fetch_bw; + u64 plane_clk; };
/**
On Thu, Jun 18, 2020 at 7:09 AM Kalyan Thota kalyan_t@codeaurora.org wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 109 +++++++++++++++++++++---- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 37 ++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 9 +- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 84 +++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 4 + 8 files changed, 233 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c index 7c230f7..e52bc44 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c @@ -29,6 +29,74 @@ enum dpu_perf_mode { DPU_PERF_MODE_MAX };
+/**
- @_dpu_core_perf_calc_bw() - to calculate BW per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- Return: returns aggregated BW for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms,
struct drm_crtc *crtc)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;u64 crtc_plane_bw = 0;u32 bw_factor;drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_plane_bw += pstate->plane_fetch_bw;}bw_factor = kms->catalog->perf.bw_inefficiency_factor;if (bw_factor) {crtc_plane_bw *= bw_factor;do_div(crtc_plane_bw, 100);}return crtc_plane_bw;+}
+/**
- _dpu_core_perf_calc_clk() - to calculate clock per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- @state - pointer to a crtc state
- Return: returns max clk for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_clk(struct dpu_kms *kms,
struct drm_crtc *crtc, struct drm_crtc_state *state)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;struct drm_display_mode *mode;u64 crtc_clk;u32 clk_factor;mode = &state->adjusted_mode;crtc_clk = mode->vtotal * mode->hdisplay * drm_mode_vrefresh(mode);drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_clk = max(pstate->plane_clk, crtc_clk);}clk_factor = kms->catalog->perf.clk_inefficiency_factor;if (clk_factor) {crtc_clk *= clk_factor;do_div(crtc_clk, 100);}return crtc_clk;+}
static struct dpu_kms *_dpu_crtc_get_kms(struct drm_crtc *crtc) { struct msm_drm_private *priv; @@ -51,12 +119,7 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, dpu_cstate = to_dpu_crtc_state(state); memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {perf->bw_ctl = kms->catalog->perf.max_bw_high *1000ULL;perf->max_per_pipe_ib = perf->bw_ctl;perf->core_clk_rate = kms->perf.max_core_clk_rate;} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { perf->bw_ctl = 0; perf->max_per_pipe_ib = 0; perf->core_clk_rate = 0;@@ -64,6 +127,10 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, perf->bw_ctl = kms->perf.fix_core_ab_vote; perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote; perf->core_clk_rate = kms->perf.fix_core_clk_rate;
} else {perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);perf->max_per_pipe_ib = kms->catalog->perf.min_dram_ib;perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state); } DPU_DEBUG(@@ -115,11 +182,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", tmp_crtc->base.id, tmp_cstate->new_perf.bw_ctl, tmp_cstate->bw_control);
/** For bw check only use the bw if the* atomic property has been already set*/if (tmp_cstate->bw_control)
bw_sum_of_intfs += tmp_cstate->new_perf.bw_ctl; }@@ -131,9 +194,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
DPU_DEBUG("final threshold bw limit = %d\n", threshold);
if (!dpu_cstate->bw_control) {DPU_DEBUG("bypass bandwidth check\n");} else if (!threshold) {
if (!threshold) { DPU_ERROR("no bandwidth limits specified\n"); return -E2BIG; } else if (bw > threshold) {@@ -154,7 +215,11 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, = dpu_crtc_get_client_type(crtc); struct drm_crtc *tmp_crtc; struct dpu_crtc_state *dpu_cstate;
int ret = 0;
int i, ret = 0;u64 avg_bw;if (!kms->num_paths)return -EINVAL; drm_for_each_crtc(tmp_crtc, crtc->dev) { if (tmp_crtc->enabled &&@@ -165,10 +230,20 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, perf.max_per_pipe_ib = max(perf.max_per_pipe_ib, dpu_cstate->new_perf.max_per_pipe_ib);
DPU_DEBUG("crtc=%d bw=%llu\n", tmp_crtc->base.id,dpu_cstate->new_perf.bw_ctl);
perf.bw_ctl += dpu_cstate->new_perf.bw_ctl;DPU_DEBUG("crtc=%d bw=%llu paths:%d\n",tmp_crtc->base.id,dpu_cstate->new_perf.bw_ctl, kms->num_paths); } }avg_bw = perf.bw_ctl;do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/for (i = 0; i < kms->num_paths; i++)icc_set_bw(kms->path[i], avg_bw, perf.max_per_pipe_ib);return ret;}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index 29d4fde..8f2357d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -541,7 +541,8 @@ .max_bw_high = 6800000, .min_core_ib = 2400000, .min_llcc_ib = 800000,
.min_dram_ib = 800000,
.min_dram_ib = 1600000,.min_prefill_lines = 24, .danger_lut_tbl = {0xff, 0xffff, 0x0}, .qos_lut_tbl = { {.nentry = ARRAY_SIZE(sc7180_qos_linear),@@ -558,6 +559,8 @@ {.rd_enable = 1, .wr_enable = 1}, {.rd_enable = 1, .wr_enable = 0} },
.clk_inefficiency_factor = 105,.bw_inefficiency_factor = 120,};
/************************************************************* diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index f7de438..f2a5fe2 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -651,6 +651,8 @@ struct dpu_perf_cdp_cfg {
- @downscaling_prefill_lines downscaling latency in lines
- @amortizable_theshold minimum y position for traffic shaping prefill
- @min_prefill_lines minimum pipeline latency in lines
- @clk_inefficiency_factor DPU src clock inefficiency factor
- @bw_inefficiency_factor DPU axi bus bw inefficiency factor
- @safe_lut_tbl: LUT tables for safe signals
- @danger_lut_tbl: LUT tables for danger signals
- @qos_lut_tbl: LUT tables for QoS signals
@@ -675,6 +677,8 @@ struct dpu_perf_cfg { u32 downscaling_prefill_lines; u32 amortizable_threshold; u32 min_prefill_lines;
u32 clk_inefficiency_factor;u32 bw_inefficiency_factor; u32 safe_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; u32 danger_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; struct dpu_qos_lut_tbl qos_lut_tbl[DPU_QOS_LUT_USAGE_MAX];diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index b8615d4..a5da7aa 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -303,6 +303,28 @@ static int dpu_kms_global_obj_init(struct dpu_kms *dpu_kms) return 0; }
+static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms) +{
struct icc_path *path0;struct icc_path *path1;struct drm_device *dev = dpu_kms->dev;path0 = of_icc_get(dev->dev, "mdp0-mem");path1 = of_icc_get(dev->dev, "mdp1-mem");if (IS_ERR_OR_NULL(path0))return PTR_ERR_OR_ZERO(path0);dpu_kms->path[0] = path0;dpu_kms->num_paths = 1;if (!IS_ERR_OR_NULL(path1)) {dpu_kms->path[1] = path1;dpu_kms->num_paths++;}return 0;+}
so wait, why do we need a 2nd nearly identical copy of dpu_mdss_parse_data_bus_icc_path() for sc7180? And tracking of the path in dpu_mdss for some gens and dpu_kms in other gens?
(I have a suspicion that the answer is dpu has too much indirection and abstraction.)
BR, -R
static int dpu_kms_enable_vblank(struct msm_kms *kms, struct drm_crtc *crtc) { return dpu_crtc_vblank(crtc, true); @@ -972,6 +994,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
dpu_vbif_init_memtypes(dpu_kms);
if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))dpu_kms_parse_data_bus_icc_path(dpu_kms);pm_runtime_put_sync(&dpu_kms->pdev->dev); return 0;@@ -1077,7 +1102,7 @@ static int dpu_dev_remove(struct platform_device *pdev)
static int __maybe_unused dpu_runtime_suspend(struct device *dev) {
int rc = -1;
int i, rc = -1; struct platform_device *pdev = to_platform_device(dev); struct dpu_kms *dpu_kms = platform_get_drvdata(pdev); struct dss_module_power *mp = &dpu_kms->mp;@@ -1086,6 +1111,9 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev) if (rc) DPU_ERROR("clock disable failed rc:%d\n", rc);
for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0, 0);return rc;}
@@ -1097,8 +1125,15 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct drm_encoder *encoder; struct drm_device *ddev; struct dss_module_power *mp = &dpu_kms->mp;
int i; ddev = dpu_kms->dev;/* Min vote of BW is required before turning on AXI clk */for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0,dpu_kms->catalog->perf.min_dram_ib);rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h index 4e32d04..94410ca 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h @@ -8,6 +8,8 @@ #ifndef __DPU_KMS_H__ #define __DPU_KMS_H__
+#include <linux/interconnect.h>
#include <drm/drm_drv.h>
#include "msm_drv.h" @@ -137,6 +139,8 @@ struct dpu_kms { * when disabled. */ atomic_t bandwidth_ref;
struct icc_path *path[2];u32 num_paths;};
struct vsync_info { diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 80d3cfc..df0a983 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -8,7 +8,6 @@ #include <linux/irqdesc.h> #include <linux/irqchip/chained_irq.h> #include "dpu_kms.h" -#include <linux/interconnect.h>
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
@@ -315,9 +314,11 @@ int dpu_mdss_init(struct drm_device *dev) } dpu_mdss->mmio_len = resource_size(res);
ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;
if (!of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss")) {ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;} mp = &dpu_mdss->mp; ret = msm_dss_parse_clock(pdev, mp);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index 3b9c33e..6379fe1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -132,6 +132,86 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane) }
/**
- _dpu_plane_calc_bw - calculate bandwidth required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated bandwidth in the plane state.
- BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
- Prefill BW Equation: line src bytes * line_time
- */
+static void _dpu_plane_calc_bw(struct drm_plane *plane,
struct drm_framebuffer *fb)+{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;const struct dpu_format *fmt = NULL;struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);int src_width, src_height, dst_height, fps;u64 plane_prefill_bw;u64 plane_bw;u32 hw_latency_lines;u64 scale_factor;int vbp, vpw;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;fmt = dpu_get_dpu_format_ext(fb->format->format, fb->modifier);src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect);src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);vbp = mode->vtotal - mode->vsync_end;vpw = mode->vsync_end - mode->vsync_start;hw_latency_lines = dpu_kms->catalog->perf.min_prefill_lines;scale_factor = src_height > dst_height ?mult_frac(src_height, 1, dst_height) : 1;plane_bw =src_width * mode->vtotal * fps * fmt->bpp *scale_factor;plane_prefill_bw =src_width * hw_latency_lines * fps * fmt->bpp *scale_factor * mode->vtotal;do_div(plane_prefill_bw, (vbp+vpw));pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw);+}
+/**
- _dpu_plane_calc_clk - calculate clock required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated clock in the plane state.
- Clock equation: dst_w * v_total * fps * (src_h / dst_h)
- */
+static void _dpu_plane_calc_clk(struct drm_plane *plane) +{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;int dst_width, src_height, dst_height, fps;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);pstate->plane_clk =dst_width * mode->vtotal * fps;if (src_height > dst_height) {pstate->plane_clk *= src_height;do_div(pstate->plane_clk, dst_height);}+}
+/**
- _dpu_plane_calc_fill_level - calculate fill level of the given source format
- @plane: Pointer to drm plane
- @fmt: Pointer to source buffer format
@@ -1102,6 +1182,10 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) }
_dpu_plane_set_qos_remap(plane);
_dpu_plane_calc_bw(plane, fb);_dpu_plane_calc_clk(plane);}
static void _dpu_plane_atomic_disable(struct drm_plane *plane) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h index 4569497..ca83b87 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h @@ -25,6 +25,8 @@
- @scaler3_cfg: configuration data for scaler3
- @pixel_ext: configuration data for pixel extensions
- @cdp_cfg: CDP configuration
- @plane_fetch_bw: calculated BW per plane
*/
- @plane_clk: calculated clk per plane
struct dpu_plane_state { struct drm_plane_state base; @@ -39,6 +41,8 @@ struct dpu_plane_state { struct dpu_hw_pixel_ext pixel_ext;
struct dpu_hw_pipe_cdp_cfg cdp_cfg;
u64 plane_fetch_bw;u64 plane_clk;};
/**
1.9.1
On 2020-07-10 22:38, Rob Clark wrote:
On Thu, Jun 18, 2020 at 7:09 AM Kalyan Thota kalyan_t@codeaurora.org wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 109 +++++++++++++++++++++---- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 37 ++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 9 +- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 84 +++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 4 + 8 files changed, 233 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c index 7c230f7..e52bc44 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c @@ -29,6 +29,74 @@ enum dpu_perf_mode { DPU_PERF_MODE_MAX };
+/**
- @_dpu_core_perf_calc_bw() - to calculate BW per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- Return: returns aggregated BW for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms,
struct drm_crtc *crtc)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;u64 crtc_plane_bw = 0;u32 bw_factor;drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_plane_bw += pstate->plane_fetch_bw;}bw_factor = kms->catalog->perf.bw_inefficiency_factor;if (bw_factor) {crtc_plane_bw *= bw_factor;do_div(crtc_plane_bw, 100);}return crtc_plane_bw;+}
+/**
- _dpu_core_perf_calc_clk() - to calculate clock per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- @state - pointer to a crtc state
- Return: returns max clk for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_clk(struct dpu_kms *kms,
struct drm_crtc *crtc, struct drm_crtc_state *state)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;struct drm_display_mode *mode;u64 crtc_clk;u32 clk_factor;mode = &state->adjusted_mode;crtc_clk = mode->vtotal * mode->hdisplay *drm_mode_vrefresh(mode);
drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_clk = max(pstate->plane_clk, crtc_clk);}clk_factor = kms->catalog->perf.clk_inefficiency_factor;if (clk_factor) {crtc_clk *= clk_factor;do_div(crtc_clk, 100);}return crtc_clk;+}
static struct dpu_kms *_dpu_crtc_get_kms(struct drm_crtc *crtc) { struct msm_drm_private *priv; @@ -51,12 +119,7 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, dpu_cstate = to_dpu_crtc_state(state); memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {perf->bw_ctl = kms->catalog->perf.max_bw_high *1000ULL;perf->max_per_pipe_ib = perf->bw_ctl;perf->core_clk_rate = kms->perf.max_core_clk_rate;} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM){
if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { perf->bw_ctl = 0; perf->max_per_pipe_ib = 0; perf->core_clk_rate = 0;@@ -64,6 +127,10 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, perf->bw_ctl = kms->perf.fix_core_ab_vote; perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote; perf->core_clk_rate = kms->perf.fix_core_clk_rate;
} else {perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);perf->max_per_pipe_ib =kms->catalog->perf.min_dram_ib;
perf->core_clk_rate = _dpu_core_perf_calc_clk(kms,crtc, state); }
DPU_DEBUG(@@ -115,11 +182,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", tmp_crtc->base.id, tmp_cstate->new_perf.bw_ctl, tmp_cstate->bw_control);
/** For bw check only use the bw if the* atomic property has been already set*/if (tmp_cstate->bw_control)
bw_sum_of_intfs +=tmp_cstate->new_perf.bw_ctl; }
@@ -131,9 +194,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
DPU_DEBUG("final threshold bw limit = %d\n",threshold);
if (!dpu_cstate->bw_control) {DPU_DEBUG("bypass bandwidth check\n");} else if (!threshold) {
if (!threshold) { DPU_ERROR("no bandwidth limits specified\n"); return -E2BIG; } else if (bw > threshold) {@@ -154,7 +215,11 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, = dpu_crtc_get_client_type(crtc); struct drm_crtc *tmp_crtc; struct dpu_crtc_state *dpu_cstate;
int ret = 0;
int i, ret = 0;u64 avg_bw;if (!kms->num_paths)return -EINVAL; drm_for_each_crtc(tmp_crtc, crtc->dev) { if (tmp_crtc->enabled &&@@ -165,10 +230,20 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, perf.max_per_pipe_ib = max(perf.max_per_pipe_ib,
dpu_cstate->new_perf.max_per_pipe_ib);
DPU_DEBUG("crtc=%d bw=%llu\n",tmp_crtc->base.id,
dpu_cstate->new_perf.bw_ctl);
perf.bw_ctl += dpu_cstate->new_perf.bw_ctl;DPU_DEBUG("crtc=%d bw=%llu paths:%d\n",tmp_crtc->base.id,dpu_cstate->new_perf.bw_ctl,kms->num_paths); } }
avg_bw = perf.bw_ctl;do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/for (i = 0; i < kms->num_paths; i++)icc_set_bw(kms->path[i], avg_bw,perf.max_per_pipe_ib);
return ret;}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index 29d4fde..8f2357d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -541,7 +541,8 @@ .max_bw_high = 6800000, .min_core_ib = 2400000, .min_llcc_ib = 800000,
.min_dram_ib = 800000,
.min_dram_ib = 1600000,.min_prefill_lines = 24, .danger_lut_tbl = {0xff, 0xffff, 0x0}, .qos_lut_tbl = { {.nentry = ARRAY_SIZE(sc7180_qos_linear),@@ -558,6 +559,8 @@ {.rd_enable = 1, .wr_enable = 1}, {.rd_enable = 1, .wr_enable = 0} },
.clk_inefficiency_factor = 105,.bw_inefficiency_factor = 120,};
/************************************************************* diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index f7de438..f2a5fe2 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -651,6 +651,8 @@ struct dpu_perf_cdp_cfg {
- @downscaling_prefill_lines downscaling latency in lines
- @amortizable_theshold minimum y position for traffic shaping
prefill
- @min_prefill_lines minimum pipeline latency in lines
- @clk_inefficiency_factor DPU src clock inefficiency factor
- @bw_inefficiency_factor DPU axi bus bw inefficiency factor
- @safe_lut_tbl: LUT tables for safe signals
- @danger_lut_tbl: LUT tables for danger signals
- @qos_lut_tbl: LUT tables for QoS signals
@@ -675,6 +677,8 @@ struct dpu_perf_cfg { u32 downscaling_prefill_lines; u32 amortizable_threshold; u32 min_prefill_lines;
u32 clk_inefficiency_factor;u32 bw_inefficiency_factor; u32 safe_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; u32 danger_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; struct dpu_qos_lut_tbl qos_lut_tbl[DPU_QOS_LUT_USAGE_MAX];diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index b8615d4..a5da7aa 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -303,6 +303,28 @@ static int dpu_kms_global_obj_init(struct dpu_kms *dpu_kms) return 0; }
+static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms) +{
struct icc_path *path0;struct icc_path *path1;struct drm_device *dev = dpu_kms->dev;path0 = of_icc_get(dev->dev, "mdp0-mem");path1 = of_icc_get(dev->dev, "mdp1-mem");if (IS_ERR_OR_NULL(path0))return PTR_ERR_OR_ZERO(path0);dpu_kms->path[0] = path0;dpu_kms->num_paths = 1;if (!IS_ERR_OR_NULL(path1)) {dpu_kms->path[1] = path1;dpu_kms->num_paths++;}return 0;+}
so wait, why do we need a 2nd nearly identical copy of dpu_mdss_parse_data_bus_icc_path() for sc7180? And tracking of the path in dpu_mdss for some gens and dpu_kms in other gens?
(I have a suspicion that the answer is dpu has too much indirection and abstraction.)
BR, -R
Hi Rob,
If you could remember, we have discussed this earlier. We don't want to change the way interconnects are defined in the DT. but since the change is about scaling the BW as per composition cycle, icc paths are needed to be available for MDP node in the kms structure
In summary behavior will be as follows
1) if icc paths are enumerated at dpu_mdss then BW vote will be once during power up. ( for cheza )
2) if icc paths are enumerated at dpu_kms then BW vote will scale on every commit. ( for Trogdor )
static int dpu_kms_enable_vblank(struct msm_kms *kms, struct drm_crtc *crtc) { return dpu_crtc_vblank(crtc, true); @@ -972,6 +994,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
dpu_vbif_init_memtypes(dpu_kms);
if (of_device_is_compatible(dev->dev->of_node,"qcom,sc7180-mdss"))
dpu_kms_parse_data_bus_icc_path(dpu_kms);pm_runtime_put_sync(&dpu_kms->pdev->dev); return 0;@@ -1077,7 +1102,7 @@ static int dpu_dev_remove(struct platform_device *pdev)
static int __maybe_unused dpu_runtime_suspend(struct device *dev) {
int rc = -1;
int i, rc = -1; struct platform_device *pdev = to_platform_device(dev); struct dpu_kms *dpu_kms = platform_get_drvdata(pdev); struct dss_module_power *mp = &dpu_kms->mp;@@ -1086,6 +1111,9 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev) if (rc) DPU_ERROR("clock disable failed rc:%d\n", rc);
for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0, 0);return rc;}
@@ -1097,8 +1125,15 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct drm_encoder *encoder; struct drm_device *ddev; struct dss_module_power *mp = &dpu_kms->mp;
int i; ddev = dpu_kms->dev;/* Min vote of BW is required before turning on AXI clk */for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0,dpu_kms->catalog->perf.min_dram_ib);rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h index 4e32d04..94410ca 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h @@ -8,6 +8,8 @@ #ifndef __DPU_KMS_H__ #define __DPU_KMS_H__
+#include <linux/interconnect.h>
#include <drm/drm_drv.h>
#include "msm_drv.h" @@ -137,6 +139,8 @@ struct dpu_kms { * when disabled. */ atomic_t bandwidth_ref;
struct icc_path *path[2];u32 num_paths;};
struct vsync_info { diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 80d3cfc..df0a983 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -8,7 +8,6 @@ #include <linux/irqdesc.h> #include <linux/irqchip/chained_irq.h> #include "dpu_kms.h" -#include <linux/interconnect.h>
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
@@ -315,9 +314,11 @@ int dpu_mdss_init(struct drm_device *dev) } dpu_mdss->mmio_len = resource_size(res);
ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;
if (!of_device_is_compatible(dev->dev->of_node,"qcom,sc7180-mdss")) {
ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;} mp = &dpu_mdss->mp; ret = msm_dss_parse_clock(pdev, mp);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index 3b9c33e..6379fe1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -132,6 +132,86 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane) }
/**
- _dpu_plane_calc_bw - calculate bandwidth required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated bandwidth in the plane state.
- BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
- Prefill BW Equation: line src bytes * line_time
- */
+static void _dpu_plane_calc_bw(struct drm_plane *plane,
struct drm_framebuffer *fb)+{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;const struct dpu_format *fmt = NULL;struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);int src_width, src_height, dst_height, fps;u64 plane_prefill_bw;u64 plane_bw;u32 hw_latency_lines;u64 scale_factor;int vbp, vpw;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;fmt = dpu_get_dpu_format_ext(fb->format->format,fb->modifier);
src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect);src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);vbp = mode->vtotal - mode->vsync_end;vpw = mode->vsync_end - mode->vsync_start;hw_latency_lines = dpu_kms->catalog->perf.min_prefill_lines;scale_factor = src_height > dst_height ?mult_frac(src_height, 1, dst_height) : 1;plane_bw =src_width * mode->vtotal * fps * fmt->bpp *scale_factor;plane_prefill_bw =src_width * hw_latency_lines * fps * fmt->bpp *scale_factor * mode->vtotal;do_div(plane_prefill_bw, (vbp+vpw));pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw);+}
+/**
- _dpu_plane_calc_clk - calculate clock required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated clock in the plane state.
- Clock equation: dst_w * v_total * fps * (src_h / dst_h)
- */
+static void _dpu_plane_calc_clk(struct drm_plane *plane) +{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;int dst_width, src_height, dst_height, fps;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);pstate->plane_clk =dst_width * mode->vtotal * fps;if (src_height > dst_height) {pstate->plane_clk *= src_height;do_div(pstate->plane_clk, dst_height);}+}
+/**
- _dpu_plane_calc_fill_level - calculate fill level of the given
source format
- @plane: Pointer to drm plane
- @fmt: Pointer to source buffer format
@@ -1102,6 +1182,10 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) }
_dpu_plane_set_qos_remap(plane);
_dpu_plane_calc_bw(plane, fb);_dpu_plane_calc_clk(plane);}
static void _dpu_plane_atomic_disable(struct drm_plane *plane) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h index 4569497..ca83b87 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h @@ -25,6 +25,8 @@
- @scaler3_cfg: configuration data for scaler3
- @pixel_ext: configuration data for pixel extensions
- @cdp_cfg: CDP configuration
- @plane_fetch_bw: calculated BW per plane
*/
- @plane_clk: calculated clk per plane
struct dpu_plane_state { struct drm_plane_state base; @@ -39,6 +41,8 @@ struct dpu_plane_state { struct dpu_hw_pixel_ext pixel_ext;
struct dpu_hw_pipe_cdp_cfg cdp_cfg;
u64 plane_fetch_bw;u64 plane_clk;};
/**
1.9.1
Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
On Mon, Jul 13, 2020 at 8:59 AM kalyan_t@codeaurora.org wrote:
On 2020-07-10 22:38, Rob Clark wrote:
On Thu, Jun 18, 2020 at 7:09 AM Kalyan Thota kalyan_t@codeaurora.org wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 109 +++++++++++++++++++++---- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 37 ++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 9 +- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 84 +++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 4 + 8 files changed, 233 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c index 7c230f7..e52bc44 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c @@ -29,6 +29,74 @@ enum dpu_perf_mode { DPU_PERF_MODE_MAX };
+/**
- @_dpu_core_perf_calc_bw() - to calculate BW per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- Return: returns aggregated BW for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms,
struct drm_crtc *crtc)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;u64 crtc_plane_bw = 0;u32 bw_factor;drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_plane_bw += pstate->plane_fetch_bw;}bw_factor = kms->catalog->perf.bw_inefficiency_factor;if (bw_factor) {crtc_plane_bw *= bw_factor;do_div(crtc_plane_bw, 100);}return crtc_plane_bw;+}
+/**
- _dpu_core_perf_calc_clk() - to calculate clock per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- @state - pointer to a crtc state
- Return: returns max clk for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_clk(struct dpu_kms *kms,
struct drm_crtc *crtc, struct drm_crtc_state *state)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;struct drm_display_mode *mode;u64 crtc_clk;u32 clk_factor;mode = &state->adjusted_mode;crtc_clk = mode->vtotal * mode->hdisplay *drm_mode_vrefresh(mode);
drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_clk = max(pstate->plane_clk, crtc_clk);}clk_factor = kms->catalog->perf.clk_inefficiency_factor;if (clk_factor) {crtc_clk *= clk_factor;do_div(crtc_clk, 100);}return crtc_clk;+}
static struct dpu_kms *_dpu_crtc_get_kms(struct drm_crtc *crtc) { struct msm_drm_private *priv; @@ -51,12 +119,7 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, dpu_cstate = to_dpu_crtc_state(state); memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {perf->bw_ctl = kms->catalog->perf.max_bw_high *1000ULL;perf->max_per_pipe_ib = perf->bw_ctl;perf->core_clk_rate = kms->perf.max_core_clk_rate;} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM){
if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { perf->bw_ctl = 0; perf->max_per_pipe_ib = 0; perf->core_clk_rate = 0;@@ -64,6 +127,10 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, perf->bw_ctl = kms->perf.fix_core_ab_vote; perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote; perf->core_clk_rate = kms->perf.fix_core_clk_rate;
} else {perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);perf->max_per_pipe_ib =kms->catalog->perf.min_dram_ib;
perf->core_clk_rate = _dpu_core_perf_calc_clk(kms,crtc, state); }
DPU_DEBUG(@@ -115,11 +182,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", tmp_crtc->base.id, tmp_cstate->new_perf.bw_ctl, tmp_cstate->bw_control);
/** For bw check only use the bw if the* atomic property has been already set*/if (tmp_cstate->bw_control)
bw_sum_of_intfs +=tmp_cstate->new_perf.bw_ctl; }
@@ -131,9 +194,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
DPU_DEBUG("final threshold bw limit = %d\n",threshold);
if (!dpu_cstate->bw_control) {DPU_DEBUG("bypass bandwidth check\n");} else if (!threshold) {
if (!threshold) { DPU_ERROR("no bandwidth limits specified\n"); return -E2BIG; } else if (bw > threshold) {@@ -154,7 +215,11 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, = dpu_crtc_get_client_type(crtc); struct drm_crtc *tmp_crtc; struct dpu_crtc_state *dpu_cstate;
int ret = 0;
int i, ret = 0;u64 avg_bw;if (!kms->num_paths)return -EINVAL; drm_for_each_crtc(tmp_crtc, crtc->dev) { if (tmp_crtc->enabled &&@@ -165,10 +230,20 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, perf.max_per_pipe_ib = max(perf.max_per_pipe_ib,
dpu_cstate->new_perf.max_per_pipe_ib);
DPU_DEBUG("crtc=%d bw=%llu\n",tmp_crtc->base.id,
dpu_cstate->new_perf.bw_ctl);
perf.bw_ctl += dpu_cstate->new_perf.bw_ctl;DPU_DEBUG("crtc=%d bw=%llu paths:%d\n",tmp_crtc->base.id,dpu_cstate->new_perf.bw_ctl,kms->num_paths); } }
avg_bw = perf.bw_ctl;do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/for (i = 0; i < kms->num_paths; i++)icc_set_bw(kms->path[i], avg_bw,perf.max_per_pipe_ib);
return ret;}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index 29d4fde..8f2357d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -541,7 +541,8 @@ .max_bw_high = 6800000, .min_core_ib = 2400000, .min_llcc_ib = 800000,
.min_dram_ib = 800000,
.min_dram_ib = 1600000,.min_prefill_lines = 24, .danger_lut_tbl = {0xff, 0xffff, 0x0}, .qos_lut_tbl = { {.nentry = ARRAY_SIZE(sc7180_qos_linear),@@ -558,6 +559,8 @@ {.rd_enable = 1, .wr_enable = 1}, {.rd_enable = 1, .wr_enable = 0} },
.clk_inefficiency_factor = 105,.bw_inefficiency_factor = 120,};
/************************************************************* diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index f7de438..f2a5fe2 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -651,6 +651,8 @@ struct dpu_perf_cdp_cfg {
- @downscaling_prefill_lines downscaling latency in lines
- @amortizable_theshold minimum y position for traffic shaping
prefill
- @min_prefill_lines minimum pipeline latency in lines
- @clk_inefficiency_factor DPU src clock inefficiency factor
- @bw_inefficiency_factor DPU axi bus bw inefficiency factor
- @safe_lut_tbl: LUT tables for safe signals
- @danger_lut_tbl: LUT tables for danger signals
- @qos_lut_tbl: LUT tables for QoS signals
@@ -675,6 +677,8 @@ struct dpu_perf_cfg { u32 downscaling_prefill_lines; u32 amortizable_threshold; u32 min_prefill_lines;
u32 clk_inefficiency_factor;u32 bw_inefficiency_factor; u32 safe_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; u32 danger_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; struct dpu_qos_lut_tbl qos_lut_tbl[DPU_QOS_LUT_USAGE_MAX];diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index b8615d4..a5da7aa 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -303,6 +303,28 @@ static int dpu_kms_global_obj_init(struct dpu_kms *dpu_kms) return 0; }
+static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms) +{
struct icc_path *path0;struct icc_path *path1;struct drm_device *dev = dpu_kms->dev;path0 = of_icc_get(dev->dev, "mdp0-mem");path1 = of_icc_get(dev->dev, "mdp1-mem");if (IS_ERR_OR_NULL(path0))return PTR_ERR_OR_ZERO(path0);dpu_kms->path[0] = path0;dpu_kms->num_paths = 1;if (!IS_ERR_OR_NULL(path1)) {dpu_kms->path[1] = path1;dpu_kms->num_paths++;}return 0;+}
so wait, why do we need a 2nd nearly identical copy of dpu_mdss_parse_data_bus_icc_path() for sc7180? And tracking of the path in dpu_mdss for some gens and dpu_kms in other gens?
(I have a suspicion that the answer is dpu has too much indirection and abstraction.)
BR, -R
Hi Rob,
If you could remember, we have discussed this earlier. We don't want to change the way interconnects are defined in the DT. but since the change is about scaling the BW as per composition cycle, icc paths are needed to be available for MDP node in the kms structure
Right, we don't want to change the bindings.. but I think we could just move the icc paths to dpu_kms in both cases, and not have this duplication?
In summary behavior will be as follows
- if icc paths are enumerated at dpu_mdss then BW vote will be once
during power up. ( for cheza )
- if icc paths are enumerated at dpu_kms then BW vote will scale on
every commit. ( for Trogdor )
If we move it all to dpu_kms, we could decide on dynamic vs static vote based on whether the necessary parameters (inefficiency_factors, etc) are set in the hwcatalog.
That said, I would kinda like to enable bw scaling on 845 as well at some point. I assume the logic should all be the same, other than the hwcatalog values. If they are called roughly the same thing in the android kernel, I could probably figure out the values and test this on my sdm850 laptop.
BR, -R
static int dpu_kms_enable_vblank(struct msm_kms *kms, struct drm_crtc *crtc) { return dpu_crtc_vblank(crtc, true); @@ -972,6 +994,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
dpu_vbif_init_memtypes(dpu_kms);
if (of_device_is_compatible(dev->dev->of_node,"qcom,sc7180-mdss"))
dpu_kms_parse_data_bus_icc_path(dpu_kms);pm_runtime_put_sync(&dpu_kms->pdev->dev); return 0;@@ -1077,7 +1102,7 @@ static int dpu_dev_remove(struct platform_device *pdev)
static int __maybe_unused dpu_runtime_suspend(struct device *dev) {
int rc = -1;
int i, rc = -1; struct platform_device *pdev = to_platform_device(dev); struct dpu_kms *dpu_kms = platform_get_drvdata(pdev); struct dss_module_power *mp = &dpu_kms->mp;@@ -1086,6 +1111,9 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev) if (rc) DPU_ERROR("clock disable failed rc:%d\n", rc);
for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0, 0);return rc;}
@@ -1097,8 +1125,15 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct drm_encoder *encoder; struct drm_device *ddev; struct dss_module_power *mp = &dpu_kms->mp;
int i; ddev = dpu_kms->dev;/* Min vote of BW is required before turning on AXI clk */for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0,dpu_kms->catalog->perf.min_dram_ib);rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h index 4e32d04..94410ca 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h @@ -8,6 +8,8 @@ #ifndef __DPU_KMS_H__ #define __DPU_KMS_H__
+#include <linux/interconnect.h>
#include <drm/drm_drv.h>
#include "msm_drv.h" @@ -137,6 +139,8 @@ struct dpu_kms { * when disabled. */ atomic_t bandwidth_ref;
struct icc_path *path[2];u32 num_paths;};
struct vsync_info { diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 80d3cfc..df0a983 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -8,7 +8,6 @@ #include <linux/irqdesc.h> #include <linux/irqchip/chained_irq.h> #include "dpu_kms.h" -#include <linux/interconnect.h>
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
@@ -315,9 +314,11 @@ int dpu_mdss_init(struct drm_device *dev) } dpu_mdss->mmio_len = resource_size(res);
ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;
if (!of_device_is_compatible(dev->dev->of_node,"qcom,sc7180-mdss")) {
ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;} mp = &dpu_mdss->mp; ret = msm_dss_parse_clock(pdev, mp);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index 3b9c33e..6379fe1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -132,6 +132,86 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane) }
/**
- _dpu_plane_calc_bw - calculate bandwidth required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated bandwidth in the plane state.
- BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
- Prefill BW Equation: line src bytes * line_time
- */
+static void _dpu_plane_calc_bw(struct drm_plane *plane,
struct drm_framebuffer *fb)+{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;const struct dpu_format *fmt = NULL;struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);int src_width, src_height, dst_height, fps;u64 plane_prefill_bw;u64 plane_bw;u32 hw_latency_lines;u64 scale_factor;int vbp, vpw;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;fmt = dpu_get_dpu_format_ext(fb->format->format,fb->modifier);
src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect);src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);vbp = mode->vtotal - mode->vsync_end;vpw = mode->vsync_end - mode->vsync_start;hw_latency_lines = dpu_kms->catalog->perf.min_prefill_lines;scale_factor = src_height > dst_height ?mult_frac(src_height, 1, dst_height) : 1;plane_bw =src_width * mode->vtotal * fps * fmt->bpp *scale_factor;plane_prefill_bw =src_width * hw_latency_lines * fps * fmt->bpp *scale_factor * mode->vtotal;do_div(plane_prefill_bw, (vbp+vpw));pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw);+}
+/**
- _dpu_plane_calc_clk - calculate clock required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated clock in the plane state.
- Clock equation: dst_w * v_total * fps * (src_h / dst_h)
- */
+static void _dpu_plane_calc_clk(struct drm_plane *plane) +{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;int dst_width, src_height, dst_height, fps;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);pstate->plane_clk =dst_width * mode->vtotal * fps;if (src_height > dst_height) {pstate->plane_clk *= src_height;do_div(pstate->plane_clk, dst_height);}+}
+/**
- _dpu_plane_calc_fill_level - calculate fill level of the given
source format
- @plane: Pointer to drm plane
- @fmt: Pointer to source buffer format
@@ -1102,6 +1182,10 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) }
_dpu_plane_set_qos_remap(plane);
_dpu_plane_calc_bw(plane, fb);_dpu_plane_calc_clk(plane);}
static void _dpu_plane_atomic_disable(struct drm_plane *plane) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h index 4569497..ca83b87 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h @@ -25,6 +25,8 @@
- @scaler3_cfg: configuration data for scaler3
- @pixel_ext: configuration data for pixel extensions
- @cdp_cfg: CDP configuration
- @plane_fetch_bw: calculated BW per plane
*/
- @plane_clk: calculated clk per plane
struct dpu_plane_state { struct drm_plane_state base; @@ -39,6 +41,8 @@ struct dpu_plane_state { struct dpu_hw_pixel_ext pixel_ext;
struct dpu_hw_pipe_cdp_cfg cdp_cfg;
u64 plane_fetch_bw;u64 plane_clk;};
/**
1.9.1
Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
On 2020-07-13 22:50, Rob Clark wrote:
On Mon, Jul 13, 2020 at 8:59 AM kalyan_t@codeaurora.org wrote:
On 2020-07-10 22:38, Rob Clark wrote:
On Thu, Jun 18, 2020 at 7:09 AM Kalyan Thota kalyan_t@codeaurora.org wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 109 +++++++++++++++++++++---- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 37 ++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 9 +- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 84 +++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 4 + 8 files changed, 233 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c index 7c230f7..e52bc44 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c @@ -29,6 +29,74 @@ enum dpu_perf_mode { DPU_PERF_MODE_MAX };
+/**
- @_dpu_core_perf_calc_bw() - to calculate BW per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- Return: returns aggregated BW for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms,
struct drm_crtc *crtc)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;u64 crtc_plane_bw = 0;u32 bw_factor;drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_plane_bw += pstate->plane_fetch_bw;}bw_factor = kms->catalog->perf.bw_inefficiency_factor;if (bw_factor) {crtc_plane_bw *= bw_factor;do_div(crtc_plane_bw, 100);}return crtc_plane_bw;+}
+/**
- _dpu_core_perf_calc_clk() - to calculate clock per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- @state - pointer to a crtc state
- Return: returns max clk for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_clk(struct dpu_kms *kms,
struct drm_crtc *crtc, struct drm_crtc_state *state)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;struct drm_display_mode *mode;u64 crtc_clk;u32 clk_factor;mode = &state->adjusted_mode;crtc_clk = mode->vtotal * mode->hdisplay *drm_mode_vrefresh(mode);
drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_clk = max(pstate->plane_clk, crtc_clk);}clk_factor = kms->catalog->perf.clk_inefficiency_factor;if (clk_factor) {crtc_clk *= clk_factor;do_div(crtc_clk, 100);}return crtc_clk;+}
static struct dpu_kms *_dpu_crtc_get_kms(struct drm_crtc *crtc) { struct msm_drm_private *priv; @@ -51,12 +119,7 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, dpu_cstate = to_dpu_crtc_state(state); memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {perf->bw_ctl = kms->catalog->perf.max_bw_high *1000ULL;perf->max_per_pipe_ib = perf->bw_ctl;perf->core_clk_rate = kms->perf.max_core_clk_rate;} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM){
if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { perf->bw_ctl = 0; perf->max_per_pipe_ib = 0; perf->core_clk_rate = 0;@@ -64,6 +127,10 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, perf->bw_ctl = kms->perf.fix_core_ab_vote; perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote; perf->core_clk_rate = kms->perf.fix_core_clk_rate;
} else {perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);perf->max_per_pipe_ib =kms->catalog->perf.min_dram_ib;
perf->core_clk_rate = _dpu_core_perf_calc_clk(kms,crtc, state); }
DPU_DEBUG(@@ -115,11 +182,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", tmp_crtc->base.id, tmp_cstate->new_perf.bw_ctl, tmp_cstate->bw_control);
/** For bw check only use the bw if the* atomic property has been already set*/if (tmp_cstate->bw_control)
bw_sum_of_intfs +=tmp_cstate->new_perf.bw_ctl; }
@@ -131,9 +194,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
DPU_DEBUG("final threshold bw limit = %d\n",threshold);
if (!dpu_cstate->bw_control) {DPU_DEBUG("bypass bandwidth check\n");} else if (!threshold) {
if (!threshold) { DPU_ERROR("no bandwidth limits specified\n"); return -E2BIG; } else if (bw > threshold) {@@ -154,7 +215,11 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, = dpu_crtc_get_client_type(crtc); struct drm_crtc *tmp_crtc; struct dpu_crtc_state *dpu_cstate;
int ret = 0;
int i, ret = 0;u64 avg_bw;if (!kms->num_paths)return -EINVAL; drm_for_each_crtc(tmp_crtc, crtc->dev) { if (tmp_crtc->enabled &&@@ -165,10 +230,20 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, perf.max_per_pipe_ib = max(perf.max_per_pipe_ib,
dpu_cstate->new_perf.max_per_pipe_ib);
DPU_DEBUG("crtc=%d bw=%llu\n",tmp_crtc->base.id,
dpu_cstate->new_perf.bw_ctl);
perf.bw_ctl += dpu_cstate->new_perf.bw_ctl;DPU_DEBUG("crtc=%d bw=%llu paths:%d\n",tmp_crtc->base.id,dpu_cstate->new_perf.bw_ctl,kms->num_paths); } }
avg_bw = perf.bw_ctl;do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/for (i = 0; i < kms->num_paths; i++)icc_set_bw(kms->path[i], avg_bw,perf.max_per_pipe_ib);
return ret;}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index 29d4fde..8f2357d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -541,7 +541,8 @@ .max_bw_high = 6800000, .min_core_ib = 2400000, .min_llcc_ib = 800000,
.min_dram_ib = 800000,
.min_dram_ib = 1600000,.min_prefill_lines = 24, .danger_lut_tbl = {0xff, 0xffff, 0x0}, .qos_lut_tbl = { {.nentry = ARRAY_SIZE(sc7180_qos_linear),@@ -558,6 +559,8 @@ {.rd_enable = 1, .wr_enable = 1}, {.rd_enable = 1, .wr_enable = 0} },
.clk_inefficiency_factor = 105,.bw_inefficiency_factor = 120,};
/************************************************************* diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index f7de438..f2a5fe2 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -651,6 +651,8 @@ struct dpu_perf_cdp_cfg {
- @downscaling_prefill_lines downscaling latency in lines
- @amortizable_theshold minimum y position for traffic shaping
prefill
- @min_prefill_lines minimum pipeline latency in lines
- @clk_inefficiency_factor DPU src clock inefficiency factor
- @bw_inefficiency_factor DPU axi bus bw inefficiency factor
- @safe_lut_tbl: LUT tables for safe signals
- @danger_lut_tbl: LUT tables for danger signals
- @qos_lut_tbl: LUT tables for QoS signals
@@ -675,6 +677,8 @@ struct dpu_perf_cfg { u32 downscaling_prefill_lines; u32 amortizable_threshold; u32 min_prefill_lines;
u32 clk_inefficiency_factor;u32 bw_inefficiency_factor; u32 safe_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; u32 danger_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; struct dpu_qos_lut_tbl qos_lut_tbl[DPU_QOS_LUT_USAGE_MAX];diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index b8615d4..a5da7aa 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -303,6 +303,28 @@ static int dpu_kms_global_obj_init(struct dpu_kms *dpu_kms) return 0; }
+static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms) +{
struct icc_path *path0;struct icc_path *path1;struct drm_device *dev = dpu_kms->dev;path0 = of_icc_get(dev->dev, "mdp0-mem");path1 = of_icc_get(dev->dev, "mdp1-mem");if (IS_ERR_OR_NULL(path0))return PTR_ERR_OR_ZERO(path0);dpu_kms->path[0] = path0;dpu_kms->num_paths = 1;if (!IS_ERR_OR_NULL(path1)) {dpu_kms->path[1] = path1;dpu_kms->num_paths++;}return 0;+}
so wait, why do we need a 2nd nearly identical copy of dpu_mdss_parse_data_bus_icc_path() for sc7180? And tracking of the path in dpu_mdss for some gens and dpu_kms in other gens?
(I have a suspicion that the answer is dpu has too much indirection and abstraction.)
BR, -R
Hi Rob,
If you could remember, we have discussed this earlier. We don't want to change the way interconnects are defined in the DT. but since the change is about scaling the BW as per composition cycle, icc paths are needed to be available for MDP node in the kms structure
Right, we don't want to change the bindings.. but I think we could just move the icc paths to dpu_kms in both cases, and not have this duplication?
In summary behavior will be as follows
- if icc paths are enumerated at dpu_mdss then BW vote will be once
during power up. ( for cheza )
- if icc paths are enumerated at dpu_kms then BW vote will scale on
every commit. ( for Trogdor )
If we move it all to dpu_kms, we could decide on dynamic vs static vote based on whether the necessary parameters (inefficiency_factors, etc) are set in the hwcatalog.
That said, I would kinda like to enable bw scaling on 845 as well at some point. I assume the logic should all be the same, other than the hwcatalog values. If they are called roughly the same thing in the android kernel, I could probably figure out the values and test this on my sdm850 laptop.
BR, -R
Sure Rob, i'll remove the duplication, can i follow it up in a separate patch instead of updating this one? i don't have Cheza setup to validate it and it will be difficult to get one due to WFH scenario is it possible to help validate the patch on Cheza?
static int dpu_kms_enable_vblank(struct msm_kms *kms, struct drm_crtc *crtc) { return dpu_crtc_vblank(crtc, true); @@ -972,6 +994,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
dpu_vbif_init_memtypes(dpu_kms);
if (of_device_is_compatible(dev->dev->of_node,"qcom,sc7180-mdss"))
dpu_kms_parse_data_bus_icc_path(dpu_kms);pm_runtime_put_sync(&dpu_kms->pdev->dev); return 0;@@ -1077,7 +1102,7 @@ static int dpu_dev_remove(struct platform_device *pdev)
static int __maybe_unused dpu_runtime_suspend(struct device *dev) {
int rc = -1;
int i, rc = -1; struct platform_device *pdev = to_platform_device(dev); struct dpu_kms *dpu_kms = platform_get_drvdata(pdev); struct dss_module_power *mp = &dpu_kms->mp;@@ -1086,6 +1111,9 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev) if (rc) DPU_ERROR("clock disable failed rc:%d\n", rc);
for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0, 0);return rc;}
@@ -1097,8 +1125,15 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct drm_encoder *encoder; struct drm_device *ddev; struct dss_module_power *mp = &dpu_kms->mp;
int i; ddev = dpu_kms->dev;/* Min vote of BW is required before turning on AXI clk */for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0,dpu_kms->catalog->perf.min_dram_ib);rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h index 4e32d04..94410ca 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h @@ -8,6 +8,8 @@ #ifndef __DPU_KMS_H__ #define __DPU_KMS_H__
+#include <linux/interconnect.h>
#include <drm/drm_drv.h>
#include "msm_drv.h" @@ -137,6 +139,8 @@ struct dpu_kms { * when disabled. */ atomic_t bandwidth_ref;
struct icc_path *path[2];u32 num_paths;};
struct vsync_info { diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 80d3cfc..df0a983 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -8,7 +8,6 @@ #include <linux/irqdesc.h> #include <linux/irqchip/chained_irq.h> #include "dpu_kms.h" -#include <linux/interconnect.h>
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
@@ -315,9 +314,11 @@ int dpu_mdss_init(struct drm_device *dev) } dpu_mdss->mmio_len = resource_size(res);
ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;
if (!of_device_is_compatible(dev->dev->of_node,"qcom,sc7180-mdss")) {
ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;} mp = &dpu_mdss->mp; ret = msm_dss_parse_clock(pdev, mp);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index 3b9c33e..6379fe1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -132,6 +132,86 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane) }
/**
- _dpu_plane_calc_bw - calculate bandwidth required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated bandwidth in the plane state.
- BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
- Prefill BW Equation: line src bytes * line_time
- */
+static void _dpu_plane_calc_bw(struct drm_plane *plane,
struct drm_framebuffer *fb)+{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;const struct dpu_format *fmt = NULL;struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);int src_width, src_height, dst_height, fps;u64 plane_prefill_bw;u64 plane_bw;u32 hw_latency_lines;u64 scale_factor;int vbp, vpw;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;fmt = dpu_get_dpu_format_ext(fb->format->format,fb->modifier);
src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect);src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);vbp = mode->vtotal - mode->vsync_end;vpw = mode->vsync_end - mode->vsync_start;hw_latency_lines = dpu_kms->catalog->perf.min_prefill_lines;scale_factor = src_height > dst_height ?mult_frac(src_height, 1, dst_height) : 1;plane_bw =src_width * mode->vtotal * fps * fmt->bpp *scale_factor;plane_prefill_bw =src_width * hw_latency_lines * fps * fmt->bpp *scale_factor * mode->vtotal;do_div(plane_prefill_bw, (vbp+vpw));pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw);+}
+/**
- _dpu_plane_calc_clk - calculate clock required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated clock in the plane state.
- Clock equation: dst_w * v_total * fps * (src_h / dst_h)
- */
+static void _dpu_plane_calc_clk(struct drm_plane *plane) +{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;int dst_width, src_height, dst_height, fps;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);pstate->plane_clk =dst_width * mode->vtotal * fps;if (src_height > dst_height) {pstate->plane_clk *= src_height;do_div(pstate->plane_clk, dst_height);}+}
+/**
- _dpu_plane_calc_fill_level - calculate fill level of the given
source format
- @plane: Pointer to drm plane
- @fmt: Pointer to source buffer format
@@ -1102,6 +1182,10 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) }
_dpu_plane_set_qos_remap(plane);
_dpu_plane_calc_bw(plane, fb);_dpu_plane_calc_clk(plane);}
static void _dpu_plane_atomic_disable(struct drm_plane *plane) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h index 4569497..ca83b87 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h @@ -25,6 +25,8 @@
- @scaler3_cfg: configuration data for scaler3
- @pixel_ext: configuration data for pixel extensions
- @cdp_cfg: CDP configuration
- @plane_fetch_bw: calculated BW per plane
*/
- @plane_clk: calculated clk per plane
struct dpu_plane_state { struct drm_plane_state base; @@ -39,6 +41,8 @@ struct dpu_plane_state { struct dpu_hw_pixel_ext pixel_ext;
struct dpu_hw_pipe_cdp_cfg cdp_cfg;
u64 plane_fetch_bw;u64 plane_clk;};
/**
1.9.1
Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
On Tue, Jul 14, 2020 at 4:20 AM kalyan_t@codeaurora.org wrote:
On 2020-07-13 22:50, Rob Clark wrote:
On Mon, Jul 13, 2020 at 8:59 AM kalyan_t@codeaurora.org wrote:
On 2020-07-10 22:38, Rob Clark wrote:
On Thu, Jun 18, 2020 at 7:09 AM Kalyan Thota kalyan_t@codeaurora.org wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 109 +++++++++++++++++++++---- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 37 ++++++++- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 9 +- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 84 +++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 4 + 8 files changed, 233 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c index 7c230f7..e52bc44 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c @@ -29,6 +29,74 @@ enum dpu_perf_mode { DPU_PERF_MODE_MAX };
+/**
- @_dpu_core_perf_calc_bw() - to calculate BW per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- Return: returns aggregated BW for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_bw(struct dpu_kms *kms,
struct drm_crtc *crtc)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;u64 crtc_plane_bw = 0;u32 bw_factor;drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_plane_bw += pstate->plane_fetch_bw;}bw_factor = kms->catalog->perf.bw_inefficiency_factor;if (bw_factor) {crtc_plane_bw *= bw_factor;do_div(crtc_plane_bw, 100);}return crtc_plane_bw;+}
+/**
- _dpu_core_perf_calc_clk() - to calculate clock per crtc
- @kms - pointer to the dpu_kms
- @crtc - pointer to a crtc
- @state - pointer to a crtc state
- Return: returns max clk for all planes in crtc.
- */
+static u64 _dpu_core_perf_calc_clk(struct dpu_kms *kms,
struct drm_crtc *crtc, struct drm_crtc_state *state)+{
struct drm_plane *plane;struct dpu_plane_state *pstate;struct drm_display_mode *mode;u64 crtc_clk;u32 clk_factor;mode = &state->adjusted_mode;crtc_clk = mode->vtotal * mode->hdisplay *drm_mode_vrefresh(mode);
drm_atomic_crtc_for_each_plane(plane, crtc) {pstate = to_dpu_plane_state(plane->state);if (!pstate)continue;crtc_clk = max(pstate->plane_clk, crtc_clk);}clk_factor = kms->catalog->perf.clk_inefficiency_factor;if (clk_factor) {crtc_clk *= clk_factor;do_div(crtc_clk, 100);}return crtc_clk;+}
static struct dpu_kms *_dpu_crtc_get_kms(struct drm_crtc *crtc) { struct msm_drm_private *priv; @@ -51,12 +119,7 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, dpu_cstate = to_dpu_crtc_state(state); memset(perf, 0, sizeof(struct dpu_core_perf_params));
if (!dpu_cstate->bw_control) {perf->bw_ctl = kms->catalog->perf.max_bw_high *1000ULL;perf->max_per_pipe_ib = perf->bw_ctl;perf->core_clk_rate = kms->perf.max_core_clk_rate;} else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM){
if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { perf->bw_ctl = 0; perf->max_per_pipe_ib = 0; perf->core_clk_rate = 0;@@ -64,6 +127,10 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, perf->bw_ctl = kms->perf.fix_core_ab_vote; perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote; perf->core_clk_rate = kms->perf.fix_core_clk_rate;
} else {perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);perf->max_per_pipe_ib =kms->catalog->perf.min_dram_ib;
perf->core_clk_rate = _dpu_core_perf_calc_clk(kms,crtc, state); }
DPU_DEBUG(@@ -115,11 +182,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", tmp_crtc->base.id, tmp_cstate->new_perf.bw_ctl, tmp_cstate->bw_control);
/** For bw check only use the bw if the* atomic property has been already set*/if (tmp_cstate->bw_control)
bw_sum_of_intfs +=tmp_cstate->new_perf.bw_ctl; }
@@ -131,9 +194,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
DPU_DEBUG("final threshold bw limit = %d\n",threshold);
if (!dpu_cstate->bw_control) {DPU_DEBUG("bypass bandwidth check\n");} else if (!threshold) {
if (!threshold) { DPU_ERROR("no bandwidth limits specified\n"); return -E2BIG; } else if (bw > threshold) {@@ -154,7 +215,11 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, = dpu_crtc_get_client_type(crtc); struct drm_crtc *tmp_crtc; struct dpu_crtc_state *dpu_cstate;
int ret = 0;
int i, ret = 0;u64 avg_bw;if (!kms->num_paths)return -EINVAL; drm_for_each_crtc(tmp_crtc, crtc->dev) { if (tmp_crtc->enabled &&@@ -165,10 +230,20 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, perf.max_per_pipe_ib = max(perf.max_per_pipe_ib,
dpu_cstate->new_perf.max_per_pipe_ib);
DPU_DEBUG("crtc=%d bw=%llu\n",tmp_crtc->base.id,
dpu_cstate->new_perf.bw_ctl);
perf.bw_ctl += dpu_cstate->new_perf.bw_ctl;DPU_DEBUG("crtc=%d bw=%llu paths:%d\n",tmp_crtc->base.id,dpu_cstate->new_perf.bw_ctl,kms->num_paths); } }
avg_bw = perf.bw_ctl;do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/for (i = 0; i < kms->num_paths; i++)icc_set_bw(kms->path[i], avg_bw,perf.max_per_pipe_ib);
return ret;}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index 29d4fde..8f2357d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -541,7 +541,8 @@ .max_bw_high = 6800000, .min_core_ib = 2400000, .min_llcc_ib = 800000,
.min_dram_ib = 800000,
.min_dram_ib = 1600000,.min_prefill_lines = 24, .danger_lut_tbl = {0xff, 0xffff, 0x0}, .qos_lut_tbl = { {.nentry = ARRAY_SIZE(sc7180_qos_linear),@@ -558,6 +559,8 @@ {.rd_enable = 1, .wr_enable = 1}, {.rd_enable = 1, .wr_enable = 0} },
.clk_inefficiency_factor = 105,.bw_inefficiency_factor = 120,};
/************************************************************* diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index f7de438..f2a5fe2 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -651,6 +651,8 @@ struct dpu_perf_cdp_cfg {
- @downscaling_prefill_lines downscaling latency in lines
- @amortizable_theshold minimum y position for traffic shaping
prefill
- @min_prefill_lines minimum pipeline latency in lines
- @clk_inefficiency_factor DPU src clock inefficiency factor
- @bw_inefficiency_factor DPU axi bus bw inefficiency factor
- @safe_lut_tbl: LUT tables for safe signals
- @danger_lut_tbl: LUT tables for danger signals
- @qos_lut_tbl: LUT tables for QoS signals
@@ -675,6 +677,8 @@ struct dpu_perf_cfg { u32 downscaling_prefill_lines; u32 amortizable_threshold; u32 min_prefill_lines;
u32 clk_inefficiency_factor;u32 bw_inefficiency_factor; u32 safe_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; u32 danger_lut_tbl[DPU_QOS_LUT_USAGE_MAX]; struct dpu_qos_lut_tbl qos_lut_tbl[DPU_QOS_LUT_USAGE_MAX];diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index b8615d4..a5da7aa 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -303,6 +303,28 @@ static int dpu_kms_global_obj_init(struct dpu_kms *dpu_kms) return 0; }
+static int dpu_kms_parse_data_bus_icc_path(struct dpu_kms *dpu_kms) +{
struct icc_path *path0;struct icc_path *path1;struct drm_device *dev = dpu_kms->dev;path0 = of_icc_get(dev->dev, "mdp0-mem");path1 = of_icc_get(dev->dev, "mdp1-mem");if (IS_ERR_OR_NULL(path0))return PTR_ERR_OR_ZERO(path0);dpu_kms->path[0] = path0;dpu_kms->num_paths = 1;if (!IS_ERR_OR_NULL(path1)) {dpu_kms->path[1] = path1;dpu_kms->num_paths++;}return 0;+}
so wait, why do we need a 2nd nearly identical copy of dpu_mdss_parse_data_bus_icc_path() for sc7180? And tracking of the path in dpu_mdss for some gens and dpu_kms in other gens?
(I have a suspicion that the answer is dpu has too much indirection and abstraction.)
BR, -R
Hi Rob,
If you could remember, we have discussed this earlier. We don't want to change the way interconnects are defined in the DT. but since the change is about scaling the BW as per composition cycle, icc paths are needed to be available for MDP node in the kms structure
Right, we don't want to change the bindings.. but I think we could just move the icc paths to dpu_kms in both cases, and not have this duplication?
In summary behavior will be as follows
- if icc paths are enumerated at dpu_mdss then BW vote will be once
during power up. ( for cheza )
- if icc paths are enumerated at dpu_kms then BW vote will scale on
every commit. ( for Trogdor )
If we move it all to dpu_kms, we could decide on dynamic vs static vote based on whether the necessary parameters (inefficiency_factors, etc) are set in the hwcatalog.
That said, I would kinda like to enable bw scaling on 845 as well at some point. I assume the logic should all be the same, other than the hwcatalog values. If they are called roughly the same thing in the android kernel, I could probably figure out the values and test this on my sdm850 laptop.
BR, -R
Sure Rob, i'll remove the duplication, can i follow it up in a separate patch instead of updating this one? i don't have Cheza setup to validate it and it will be difficult to get one due to WFH scenario is it possible to help validate the patch on Cheza?
yeah, we can do that as follow-up.. if I can at least help validate on sdm850 which is close enough to the same thing as sdm845 (at least as far as display)
BR, -R
static int dpu_kms_enable_vblank(struct msm_kms *kms, struct drm_crtc *crtc) { return dpu_crtc_vblank(crtc, true); @@ -972,6 +994,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
dpu_vbif_init_memtypes(dpu_kms);
if (of_device_is_compatible(dev->dev->of_node,"qcom,sc7180-mdss"))
dpu_kms_parse_data_bus_icc_path(dpu_kms);pm_runtime_put_sync(&dpu_kms->pdev->dev); return 0;@@ -1077,7 +1102,7 @@ static int dpu_dev_remove(struct platform_device *pdev)
static int __maybe_unused dpu_runtime_suspend(struct device *dev) {
int rc = -1;
int i, rc = -1; struct platform_device *pdev = to_platform_device(dev); struct dpu_kms *dpu_kms = platform_get_drvdata(pdev); struct dss_module_power *mp = &dpu_kms->mp;@@ -1086,6 +1111,9 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev) if (rc) DPU_ERROR("clock disable failed rc:%d\n", rc);
for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0, 0);return rc;}
@@ -1097,8 +1125,15 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) struct drm_encoder *encoder; struct drm_device *ddev; struct dss_module_power *mp = &dpu_kms->mp;
int i; ddev = dpu_kms->dev;/* Min vote of BW is required before turning on AXI clk */for (i = 0; i < dpu_kms->num_paths; i++)icc_set_bw(dpu_kms->path[i], 0,dpu_kms->catalog->perf.min_dram_ib);rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); if (rc) { DPU_ERROR("clock enable failed rc:%d\n", rc);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h index 4e32d04..94410ca 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h @@ -8,6 +8,8 @@ #ifndef __DPU_KMS_H__ #define __DPU_KMS_H__
+#include <linux/interconnect.h>
#include <drm/drm_drv.h>
#include "msm_drv.h" @@ -137,6 +139,8 @@ struct dpu_kms { * when disabled. */ atomic_t bandwidth_ref;
struct icc_path *path[2];u32 num_paths;};
struct vsync_info { diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 80d3cfc..df0a983 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -8,7 +8,6 @@ #include <linux/irqdesc.h> #include <linux/irqchip/chained_irq.h> #include "dpu_kms.h" -#include <linux/interconnect.h>
#define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base)
@@ -315,9 +314,11 @@ int dpu_mdss_init(struct drm_device *dev) } dpu_mdss->mmio_len = resource_size(res);
ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;
if (!of_device_is_compatible(dev->dev->of_node,"qcom,sc7180-mdss")) {
ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);if (ret)return ret;} mp = &dpu_mdss->mp; ret = msm_dss_parse_clock(pdev, mp);diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index 3b9c33e..6379fe1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -132,6 +132,86 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane) }
/**
- _dpu_plane_calc_bw - calculate bandwidth required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated bandwidth in the plane state.
- BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
- Prefill BW Equation: line src bytes * line_time
- */
+static void _dpu_plane_calc_bw(struct drm_plane *plane,
struct drm_framebuffer *fb)+{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;const struct dpu_format *fmt = NULL;struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);int src_width, src_height, dst_height, fps;u64 plane_prefill_bw;u64 plane_bw;u32 hw_latency_lines;u64 scale_factor;int vbp, vpw;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;fmt = dpu_get_dpu_format_ext(fb->format->format,fb->modifier);
src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect);src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);vbp = mode->vtotal - mode->vsync_end;vpw = mode->vsync_end - mode->vsync_start;hw_latency_lines = dpu_kms->catalog->perf.min_prefill_lines;scale_factor = src_height > dst_height ?mult_frac(src_height, 1, dst_height) : 1;plane_bw =src_width * mode->vtotal * fps * fmt->bpp *scale_factor;plane_prefill_bw =src_width * hw_latency_lines * fps * fmt->bpp *scale_factor * mode->vtotal;do_div(plane_prefill_bw, (vbp+vpw));pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw);+}
+/**
- _dpu_plane_calc_clk - calculate clock required for a plane
- @Plane: Pointer to drm plane.
- Result: Updates calculated clock in the plane state.
- Clock equation: dst_w * v_total * fps * (src_h / dst_h)
- */
+static void _dpu_plane_calc_clk(struct drm_plane *plane) +{
struct dpu_plane *pdpu = to_dpu_plane(plane);struct dpu_plane_state *pstate;struct drm_display_mode *mode;int dst_width, src_height, dst_height, fps;pstate = to_dpu_plane_state(plane->state);mode = &plane->state->crtc->mode;src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect);dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);fps = drm_mode_vrefresh(mode);pstate->plane_clk =dst_width * mode->vtotal * fps;if (src_height > dst_height) {pstate->plane_clk *= src_height;do_div(pstate->plane_clk, dst_height);}+}
+/**
- _dpu_plane_calc_fill_level - calculate fill level of the given
source format
- @plane: Pointer to drm plane
- @fmt: Pointer to source buffer format
@@ -1102,6 +1182,10 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) }
_dpu_plane_set_qos_remap(plane);
_dpu_plane_calc_bw(plane, fb);_dpu_plane_calc_clk(plane);}
static void _dpu_plane_atomic_disable(struct drm_plane *plane) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h index 4569497..ca83b87 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h @@ -25,6 +25,8 @@
- @scaler3_cfg: configuration data for scaler3
- @pixel_ext: configuration data for pixel extensions
- @cdp_cfg: CDP configuration
- @plane_fetch_bw: calculated BW per plane
*/
- @plane_clk: calculated clk per plane
struct dpu_plane_state { struct drm_plane_state base; @@ -39,6 +41,8 @@ struct dpu_plane_state { struct dpu_hw_pixel_ext pixel_ext;
struct dpu_hw_pipe_cdp_cfg cdp_cfg;
u64 plane_fetch_bw;u64 plane_clk;};
/**
1.9.1
Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
Freedreno mailing list Freedreno@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/freedreno
On Thu, Jun 18, 2020 at 07:38:41PM +0530, Kalyan Thota wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
It seems this is an evolution of this series: https://patchwork.kernel.org/project/linux-arm-msm/list/?series=265351
Are the DT bits of the series still valid? If so please include them in the series, otherwise please add DT patches to allow folks to test and review, and get them landed in Bjorn's tree after the driver changes have landed.
On 2020-07-14 06:42, Matthias Kaehlcke wrote:
On Thu, Jun 18, 2020 at 07:38:41PM +0530, Kalyan Thota wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
It seems this is an evolution of this series: https://patchwork.kernel.org/project/linux-arm-msm/list/?series=265351
Are the DT bits of the series still valid? If so please include them in the series, otherwise please add DT patches to allow folks to test and review, and get them landed in Bjorn's tree after the driver changes have landed.
Hi,
Yes the patch is dependent on the DT changes, should i add them with depends tag in the commit text ? https://patchwork.kernel.org/patch/11470785/ https://patchwork.kernel.org/patch/11470789/
- Kalyan
On Tue, Jul 14, 2020 at 04:39:47PM +0530, kalyan_t@codeaurora.org wrote:
On 2020-07-14 06:42, Matthias Kaehlcke wrote:
On Thu, Jun 18, 2020 at 07:38:41PM +0530, Kalyan Thota wrote:
This change adds support to scale src clk and bandwidth as per composition requirements.
Interconnect registration for bw has been moved to mdp device node from mdss to facilitate the scaling.
Changes in v1:
- Address armv7 compilation issues with the patch (Rob)
Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org
It seems this is an evolution of this series: https://patchwork.kernel.org/project/linux-arm-msm/list/?series=265351
Are the DT bits of the series still valid? If so please include them in the series, otherwise please add DT patches to allow folks to test and review, and get them landed in Bjorn's tree after the driver changes have landed.
Hi,
Yes the patch is dependent on the DT changes, should i add them with depends tag in the commit text ? https://patchwork.kernel.org/patch/11470785/ https://patchwork.kernel.org/patch/11470789/
This patch doesn't really depend on the DT changes. I would suggest to make this a series of 3 patches, just like the original series linked above.
dri-devel@lists.freedesktop.org
-
Kalyan Thota -
kalyan_t＠codeaurora.org
-
Matthias Kaehlcke -
Rob Clark