This series attempts to enable V3D on BCM2711, the SoC available on the Raspberry Pi 4 family of boards.
Due to the lack of documentation some things are taken as it from testing/downstream implementation[1], which I'm hilighting here:
- It's not clear that the following is 100% true, maybe someone can confirm:
"In BCM2711 the new ARGON ASB took over V3D. The old ASB is still present with the ISP and H264 bits, and V3D is in the same place in the new ASB as the old one."
- Patch #9 ("soc: bcm: bcm2835-power: Bypass power_on/off() calls"), I took as is from the downstream implementation, I can't really provide an exact explanation on what changed HW wise.
- Ultimately, I need confirmation from the Broadcom folks that they are alright with patch #11 ("drm/v3d: Get rid of pm code")
With all this, I get a more or less stable experience using mesa 20.3.4 and X11/Gnome.
Regards, Nicolas
---
Changes since v2: - Correct ASB names - Address dt-binding comments
Changes since v1: - Use 'reg-names' - Correct ASB names - Add missing binding patch for V3D - Address Stefan's comments
Nicolas Saenz Julienne (15): dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node mfd: bcm2835-pm: Use 'reg-names' to get resources mfd: bcm2835-pm: Add support for BCM2711 soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB soc: bcm: bcm2835-power: Bypass power_on/off() calls dt-bindings: gpu: v3d: Add BCM2711's compatible drm/v3d: Get rid of pm code drm/v3d: Add support for bcm2711 ARM: dts: bcm2711: Enable V3D ARM: configs: Enable DRM_V3D arm64: config: Enable DRM_V3D
.../devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 + .../bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 ---------- .../bindings/soc/bcm/brcm,bcm2835-pm.yaml | 87 +++++++++++++++++++ arch/arm/boot/dts/bcm2711.dtsi | 15 +++- arch/arm/boot/dts/bcm2835-common.dtsi | 1 + arch/arm/configs/multi_v7_defconfig | 1 + arch/arm64/configs/defconfig | 1 + drivers/gpu/drm/v3d/Kconfig | 2 +- drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +--- drivers/gpu/drm/v3d/v3d_drv.c | 12 +-- drivers/gpu/drm/v3d/v3d_gem.c | 9 -- drivers/mfd/bcm2835-pm.c | 80 ++++++++++++----- drivers/soc/bcm/bcm2835-power.c | 74 ++++++++++------ include/linux/mfd/bcm2835-pm.h | 1 + 14 files changed, 217 insertions(+), 131 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
BCM2711, Raspberry Pi 4's SoC, contains a V3D core. So add its specific compatible to the bindings.
Signed-off-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de Reviewed-by: Rob Herring robh@kernel.org --- Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml index 9d72264fa90a..8401385bb33c 100644 --- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml @@ -18,6 +18,7 @@ properties: enum: - brcm,7268-v3d - brcm,7278-v3d + - brcm,bcm2711-v3d
reg: items:
Runtime PM doesn't seem to work correctly on this driver. On top of that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the driver's PM ops were not hooked-up.
So, in order to support regular operation with V3D on BCM2711 (Raspberry Pi 4), get rid of the PM code. PM will be reinstated once we figure out the underlying issues.
Signed-off-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de --- drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +----------------- drivers/gpu/drm/v3d/v3d_drv.c | 11 ----------- drivers/gpu/drm/v3d/v3d_gem.c | 9 --------- 3 files changed, 1 insertion(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/v3d/v3d_debugfs.c b/drivers/gpu/drm/v3d/v3d_debugfs.c index e76b24bb8828..e1d5f3423059 100644 --- a/drivers/gpu/drm/v3d/v3d_debugfs.c +++ b/drivers/gpu/drm/v3d/v3d_debugfs.c @@ -4,7 +4,6 @@ #include <linux/circ_buf.h> #include <linux/ctype.h> #include <linux/debugfs.h> -#include <linux/pm_runtime.h> #include <linux/seq_file.h>
#include <drm/drm_debugfs.h> @@ -130,11 +129,7 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; struct v3d_dev *v3d = to_v3d_dev(dev); u32 ident0, ident1, ident2, ident3, cores; - int ret, core; - - ret = pm_runtime_get_sync(v3d->drm.dev); - if (ret < 0) - return ret; + int core;
ident0 = V3D_READ(V3D_HUB_IDENT0); ident1 = V3D_READ(V3D_HUB_IDENT1); @@ -187,9 +182,6 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused) (misccfg & V3D_MISCCFG_OVRTMUOUT) != 0); }
- pm_runtime_mark_last_busy(v3d->drm.dev); - pm_runtime_put_autosuspend(v3d->drm.dev); - return 0; }
@@ -217,11 +209,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused) uint32_t cycles; int core = 0; int measure_ms = 1000; - int ret; - - ret = pm_runtime_get_sync(v3d->drm.dev); - if (ret < 0) - return ret;
if (v3d->ver >= 40) { V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3, @@ -245,9 +232,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused) cycles / (measure_ms * 1000), (cycles / (measure_ms * 100)) % 10);
- pm_runtime_mark_last_busy(v3d->drm.dev); - pm_runtime_put_autosuspend(v3d->drm.dev); - return 0; }
diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c index 99e22beea90b..7a3336443a12 100644 --- a/drivers/gpu/drm/v3d/v3d_drv.c +++ b/drivers/gpu/drm/v3d/v3d_drv.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/pm_runtime.h> #include <linux/reset.h>
#include <drm/drm_drv.h> @@ -43,7 +42,6 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data, { struct v3d_dev *v3d = to_v3d_dev(dev); struct drm_v3d_get_param *args = data; - int ret; static const u32 reg_map[] = { [DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG, [DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1, @@ -69,17 +67,12 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data, if (args->value != 0) return -EINVAL;
- ret = pm_runtime_get_sync(v3d->drm.dev); - if (ret < 0) - return ret; if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 && args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) { args->value = V3D_CORE_READ(0, offset); } else { args->value = V3D_READ(offset); } - pm_runtime_mark_last_busy(v3d->drm.dev); - pm_runtime_put_autosuspend(v3d->drm.dev); return 0; }
@@ -271,10 +264,6 @@ static int v3d_platform_drm_probe(struct platform_device *pdev) return -ENOMEM; }
- pm_runtime_use_autosuspend(dev); - pm_runtime_set_autosuspend_delay(dev, 50); - pm_runtime_enable(dev); - ret = v3d_gem_init(drm); if (ret) goto dma_free; diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c index 4eb354226972..75582b03470b 100644 --- a/drivers/gpu/drm/v3d/v3d_gem.c +++ b/drivers/gpu/drm/v3d/v3d_gem.c @@ -6,7 +6,6 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/pm_runtime.h> #include <linux/reset.h> #include <linux/sched/signal.h> #include <linux/uaccess.h> @@ -372,9 +371,6 @@ v3d_job_free(struct kref *ref) dma_fence_put(job->irq_fence); dma_fence_put(job->done_fence);
- pm_runtime_mark_last_busy(job->v3d->drm.dev); - pm_runtime_put_autosuspend(job->v3d->drm.dev); - kfree(job); }
@@ -441,10 +437,6 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv, job->v3d = v3d; job->free = free;
- ret = pm_runtime_get_sync(v3d->drm.dev); - if (ret < 0) - return ret; - xa_init_flags(&job->deps, XA_FLAGS_ALLOC);
ret = drm_syncobj_find_fence(file_priv, in_sync, 0, 0, &in_fence); @@ -460,7 +452,6 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv, return 0; fail: xa_destroy(&job->deps); - pm_runtime_put_autosuspend(v3d->drm.dev); return ret; }
Add compatible string and Kconfig options for bcm2711.
Signed-off-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de --- drivers/gpu/drm/v3d/Kconfig | 2 +- drivers/gpu/drm/v3d/v3d_drv.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/v3d/Kconfig b/drivers/gpu/drm/v3d/Kconfig index 9a5c44606337..b0e048697964 100644 --- a/drivers/gpu/drm/v3d/Kconfig +++ b/drivers/gpu/drm/v3d/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config DRM_V3D tristate "Broadcom V3D 3.x and newer" - depends on ARCH_BCM || ARCH_BCMSTB || COMPILE_TEST + depends on ARCH_BCM || ARCH_BCMSTB || ARCH_BCM2835 || COMPILE_TEST depends on DRM depends on COMMON_CLK depends on MMU diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c index 7a3336443a12..1504b6f84441 100644 --- a/drivers/gpu/drm/v3d/v3d_drv.c +++ b/drivers/gpu/drm/v3d/v3d_drv.c @@ -184,6 +184,7 @@ static const struct drm_driver v3d_drm_driver = { static const struct of_device_id v3d_of_match[] = { { .compatible = "brcm,7268-v3d" }, { .compatible = "brcm,7278-v3d" }, + { .compatible = "brcm,bcm2711-v3d" }, {}, }; MODULE_DEVICE_TABLE(of, v3d_of_match);
dri-devel@lists.freedesktop.org
-
Nicolas Saenz Julienne