From: Ville Syrjälä ville.syrjala@linux.intel.com

The sprite planes (in fact all display planes starting from gen4) support 180 degree rotation. Add the relevant low level bits to the sprite code to make use of that feature.

The upper layers are not yet plugged in.

v2: HSW handles the rotated buffer offset automagically

v3: BDW also handles the rotated buffer offset automagically

Testcase: igt/kms_rotation_crc Cc: dri-devel@lists.freedesktop.org Signed-off-by: Ville Syrjälä ville.syrjala@linux.intel.com Signed-off-by: Sagar Kamble sagar.a.kamble@intel.com Reviewed-by: Imre Deak imre.deak@intel.com --- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_drv.h | 1 + drivers/gpu/drm/i915/intel_sprite.c | 38 +++++++++++++++++++++++++++++++++++ 3 files changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index dc13961..1ece0c3 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -4218,6 +4218,7 @@ enum punit_power_well { #define DVS_YUV_ORDER_UYVY (1<<16) #define DVS_YUV_ORDER_YVYU (2<<16) #define DVS_YUV_ORDER_VYUY (3<<16) +#define DVS_ROTATE_180 (1<<15) #define DVS_DEST_KEY (1<<2) #define DVS_TRICKLE_FEED_DISABLE (1<<14) #define DVS_TILED (1<<10) @@ -4288,6 +4289,7 @@ enum punit_power_well { #define SPRITE_YUV_ORDER_UYVY (1<<16) #define SPRITE_YUV_ORDER_YVYU (2<<16) #define SPRITE_YUV_ORDER_VYUY (3<<16) +#define SPRITE_ROTATE_180 (1<<15) #define SPRITE_TRICKLE_FEED_DISABLE (1<<14) #define SPRITE_INT_GAMMA_ENABLE (1<<13) #define SPRITE_TILED (1<<10) @@ -4361,6 +4363,7 @@ enum punit_power_well { #define SP_YUV_ORDER_UYVY (1<<16) #define SP_YUV_ORDER_YVYU (2<<16) #define SP_YUV_ORDER_VYUY (3<<16) +#define SP_ROTATE_180 (1<<15) #define SP_TILED (1<<10) #define _SPALINOFF (VLV_DISPLAY_BASE + 0x72184) #define _SPASTRIDE (VLV_DISPLAY_BASE + 0x72188) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 28d185d..bd915f4 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -447,6 +447,7 @@ struct intel_plane { unsigned int crtc_w, crtc_h; uint32_t src_x, src_y; uint32_t src_w, src_h; + unsigned int rotation;

/* Since we need to change the watermarks before/after * enabling/disabling the planes, we need to store the parameters here diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index d34a569..f4d10c4 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -164,6 +164,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, sprctl &= ~SP_PIXFORMAT_MASK; sprctl &= ~SP_YUV_BYTE_ORDER_MASK; sprctl &= ~SP_TILED; + sprctl &= ~SP_ROTATE_180;

switch (fb->pixel_format) { case DRM_FORMAT_YUYV: @@ -236,6 +237,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, fb->pitches[0]); linear_offset -= sprsurf_offset;

+ if (intel_plane->rotation == BIT(DRM_ROTATE_180)) { + sprctl |= SP_ROTATE_180; + + x += src_w; + y += src_h; + linear_offset += src_h * fb->pitches[0] + src_w * pixel_size; + } + atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);

intel_update_primary_plane(intel_crtc); @@ -365,6 +374,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, sprctl &= ~SPRITE_RGB_ORDER_RGBX; sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK; sprctl &= ~SPRITE_TILED; + sprctl &= ~SPRITE_ROTATE_180;

switch (fb->pixel_format) { case DRM_FORMAT_XBGR8888: @@ -427,6 +437,18 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, pixel_size, fb->pitches[0]); linear_offset -= sprsurf_offset;

+ if (intel_plane->rotation == BIT(DRM_ROTATE_180)) { + sprctl |= SPRITE_ROTATE_180; + + /* HSW and BDW does this automagically in hardware */ + if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) { + x += src_w; + y += src_h; + linear_offset += src_h * fb->pitches[0] + + src_w * pixel_size; + } + } + atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);

intel_update_primary_plane(intel_crtc); @@ -572,6 +594,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, dvscntr &= ~DVS_RGB_ORDER_XBGR; dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK; dvscntr &= ~DVS_TILED; + dvscntr &= ~DVS_ROTATE_180;

switch (fb->pixel_format) { case DRM_FORMAT_XBGR8888: @@ -629,6 +652,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, pixel_size, fb->pitches[0]); linear_offset -= dvssurf_offset;

+ if (intel_plane->rotation == BIT(DRM_ROTATE_180)) { + dvscntr |= DVS_ROTATE_180; + + x += src_w; + y += src_h; + linear_offset += src_h * fb->pitches[0] + src_w * pixel_size; + } + atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);

intel_update_primary_plane(intel_crtc); @@ -896,6 +927,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, max_scale = intel_plane->max_downscale << 16; min_scale = intel_plane->can_scale ? 1 : (1 << 16);

+ drm_rect_rotate(&src, fb->width << 16, fb->height << 16, + intel_plane->rotation); + hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale); BUG_ON(hscale < 0);

@@ -934,6 +968,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, drm_rect_width(&dst) * hscale - drm_rect_width(&src), drm_rect_height(&dst) * vscale - drm_rect_height(&src));

+ drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16, + intel_plane->rotation); + /* sanity check to make sure the src viewport wasn't enlarged */ WARN_ON(src.x1 < (int) src_x || src.y1 < (int) src_y || @@ -1311,6 +1348,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)

intel_plane->pipe = pipe; intel_plane->plane = plane; + intel_plane->rotation = BIT(DRM_ROTATE_0); possible_crtcs = (1 << pipe); ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs, &intel_plane_funcs,