From: Quentin Schulz quentin.schulz@theobroma-systems.com
To prepare for a new display to be supported by this driver which has a slightly different set of DSI mode related flags, let's move the currently hardcoded mode flags to the .data field of of_device_id structure.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com --- drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c index a5a414920430..67eb474e28c6 100644 --- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c @@ -25,6 +25,7 @@ struct ltk050h3146w_cmd {
struct ltk050h3146w; struct ltk050h3146w_desc { + const unsigned long mode_flags; const struct drm_display_mode *mode; int (*init)(struct ltk050h3146w *ctx); }; @@ -339,6 +340,8 @@ static const struct drm_display_mode ltk050h3146w_mode = { static const struct ltk050h3146w_desc ltk050h3146w_data = { .mode = <k050h3146w_mode, .init = ltk050h3146w_init_sequence, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET, };
static int ltk050h3146w_a2_select_page(struct ltk050h3146w *ctx, int page) @@ -433,6 +436,8 @@ static const struct drm_display_mode ltk050h3146w_a2_mode = { static const struct ltk050h3146w_desc ltk050h3146w_a2_data = { .mode = <k050h3146w_a2_mode, .init = ltk050h3146w_a2_init_sequence, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET, };
static int ltk050h3146w_unprepare(struct drm_panel *panel) @@ -592,8 +597,7 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
dsi->lanes = 4; dsi->format = MIPI_DSI_FMT_RGB888; - dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | - MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET; + dsi->mode_flags = ctx->panel_desc->mode_flags;
drm_panel_init(&ctx->panel, &dsi->dev, <k050h3146w_funcs, DRM_MODE_CONNECTOR_DSI);
From: Klaus Goger klaus.goger@theobroma-systems.com
The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving controller is a Himax HX8394-F, slightly different from LTK050H3146W by its init sequence, mode details and mode flags.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Klaus Goger klaus.goger@theobroma-systems.com Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com --- .../drm/panel/panel-leadtek-ltk050h3146w.c | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c index 67eb474e28c6..3be815c3be68 100644 --- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c @@ -253,6 +253,89 @@ struct ltk050h3146w *panel_to_ltk050h3146w(struct drm_panel *panel) return ret; \ } while (0)
+static int ltk050h3148w_init_sequence(struct ltk050h3146w *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + /* + * Init sequence was supplied by the panel vendor without much + * documentation. + */ + dsi_dcs_write_seq(dsi, 0xb9, 0xff, 0x83, 0x94); + dsi_dcs_write_seq(dsi, 0xb1, 0x50, 0x15, 0x75, 0x09, 0x32, 0x44, 0x71, + 0x31, 0x55, 0x2f); + dsi_dcs_write_seq(dsi, 0xba, 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0); + dsi_dcs_write_seq(dsi, 0xd2, 0x88); + dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0x80, 0x64, 0x10, 0x07); + dsi_dcs_write_seq(dsi, 0xb4, 0x05, 0x70, 0x05, 0x70, 0x01, 0x70, 0x01, + 0x0c, 0x86, 0x75, 0x00, 0x3f, 0x01, 0x74, 0x01, 0x74, + 0x01, 0x74, 0x01, 0x0c, 0x86); + dsi_dcs_write_seq(dsi, 0xd3, 0x00, 0x00, 0x07, 0x07, 0x40, 0x1e, 0x08, + 0x00, 0x32, 0x10, 0x08, 0x00, 0x08, 0x54, 0x15, 0x10, + 0x05, 0x04, 0x02, 0x12, 0x10, 0x05, 0x07, 0x33, 0x34, + 0x0c, 0x0c, 0x37, 0x10, 0x07, 0x17, 0x11, 0x40); + dsi_dcs_write_seq(dsi, 0xd5, 0x19, 0x19, 0x18, 0x18, 0x1b, 0x1b, 0x1a, + 0x1a, 0x04, 0x05, 0x06, 0x07, 0x00, 0x01, 0x02, 0x03, + 0x20, 0x21, 0x18, 0x18, 0x22, 0x23, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18); + dsi_dcs_write_seq(dsi, 0xd6, 0x18, 0x18, 0x19, 0x19, 0x1b, 0x1b, 0x1a, + 0x1a, 0x03, 0x02, 0x01, 0x00, 0x07, 0x06, 0x05, 0x04, + 0x23, 0x22, 0x18, 0x18, 0x21, 0x20, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18); + dsi_dcs_write_seq(dsi, 0xe0, 0x00, 0x03, 0x09, 0x11, 0x11, 0x14, 0x18, + 0x16, 0x2e, 0x3d, 0x4d, 0x4d, 0x58, 0x6c, 0x72, 0x78, + 0x88, 0x8b, 0x86, 0xa4, 0xb2, 0x58, 0x55, 0x59, 0x5b, + 0x5d, 0x60, 0x64, 0x7f, 0x00, 0x03, 0x09, 0x0f, 0x11, + 0x14, 0x18, 0x16, 0x2e, 0x3d, 0x4d, 0x4d, 0x58, 0x6d, + 0x73, 0x78, 0x88, 0x8b, 0x87, 0xa5, 0xb2, 0x58, 0x55, + 0x58, 0x5b, 0x5d, 0x61, 0x65, 0x7f); + dsi_dcs_write_seq(dsi, 0xcc, 0x0b); + dsi_dcs_write_seq(dsi, 0xc0, 0x1f, 0x31); + dsi_dcs_write_seq(dsi, 0xb6, 0xc4, 0xc4); + dsi_dcs_write_seq(dsi, 0xbd, 0x01); + dsi_dcs_write_seq(dsi, 0xb1, 0x00); + dsi_dcs_write_seq(dsi, 0xbd, 0x00); + dsi_dcs_write_seq(dsi, 0xc6, 0xef); + dsi_dcs_write_seq(dsi, 0xd4, 0x02); + dsi_dcs_write_seq(dsi, 0x11); + dsi_dcs_write_seq(dsi, 0x29); + + ret = mipi_dsi_dcs_set_tear_on(dsi, 1); + if (ret < 0) { + dev_err(ctx->dev, "failed to set tear on: %d\n", ret); + return ret; + } + + msleep(60); + + return 0; +} + +static const struct drm_display_mode ltk050h3148w_mode = { + .hdisplay = 720, + .hsync_start = 720 + 12, + .hsync_end = 720 + 12 + 6, + .htotal = 720 + 12 + 6 + 24, + .vdisplay = 1280, + .vsync_start = 1280 + 9, + .vsync_end = 1280 + 9 + 2, + .vtotal = 1280 + 9 + 2 + 16, + .clock = 59756, + .width_mm = 62, + .height_mm = 110, +}; + +static const struct ltk050h3146w_desc ltk050h3148w_data = { + .mode = <k050h3148w_mode, + .init = ltk050h3148w_init_sequence, + .mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE, +}; + static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx) { struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); @@ -657,6 +740,10 @@ static const struct of_device_id ltk050h3146w_of_match[] = { .compatible = "leadtek,ltk050h3146w-a2", .data = <k050h3146w_a2_data, }, + { + .compatible = "leadtek,ltk050h3148w", + .data = <k050h3148w_data, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, ltk050h3146w_of_match);
Hi,
On Mon 31 Jan 22, 17:47, quentin.schulz@theobroma-systems.com wrote:
From: Klaus Goger klaus.goger@theobroma-systems.com
The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving controller is a Himax HX8394-F, slightly different from LTK050H3146W by its init sequence, mode details and mode flags.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Klaus Goger klaus.goger@theobroma-systems.com Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com
Reviewed-by: Paul Kocialkowski paul.kocialkowski@bootlin.com
Cheers,
Paul
.../drm/panel/panel-leadtek-ltk050h3146w.c | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c index 67eb474e28c6..3be815c3be68 100644 --- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c @@ -253,6 +253,89 @@ struct ltk050h3146w *panel_to_ltk050h3146w(struct drm_panel *panel) return ret; \ } while (0)
+static int ltk050h3148w_init_sequence(struct ltk050h3146w *ctx) +{
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
- int ret;
- /*
* Init sequence was supplied by the panel vendor without much
* documentation.
*/
- dsi_dcs_write_seq(dsi, 0xb9, 0xff, 0x83, 0x94);
- dsi_dcs_write_seq(dsi, 0xb1, 0x50, 0x15, 0x75, 0x09, 0x32, 0x44, 0x71,
0x31, 0x55, 0x2f);
- dsi_dcs_write_seq(dsi, 0xba, 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
- dsi_dcs_write_seq(dsi, 0xd2, 0x88);
- dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0x80, 0x64, 0x10, 0x07);
- dsi_dcs_write_seq(dsi, 0xb4, 0x05, 0x70, 0x05, 0x70, 0x01, 0x70, 0x01,
0x0c, 0x86, 0x75, 0x00, 0x3f, 0x01, 0x74, 0x01, 0x74,
0x01, 0x74, 0x01, 0x0c, 0x86);
- dsi_dcs_write_seq(dsi, 0xd3, 0x00, 0x00, 0x07, 0x07, 0x40, 0x1e, 0x08,
0x00, 0x32, 0x10, 0x08, 0x00, 0x08, 0x54, 0x15, 0x10,
0x05, 0x04, 0x02, 0x12, 0x10, 0x05, 0x07, 0x33, 0x34,
0x0c, 0x0c, 0x37, 0x10, 0x07, 0x17, 0x11, 0x40);
- dsi_dcs_write_seq(dsi, 0xd5, 0x19, 0x19, 0x18, 0x18, 0x1b, 0x1b, 0x1a,
0x1a, 0x04, 0x05, 0x06, 0x07, 0x00, 0x01, 0x02, 0x03,
0x20, 0x21, 0x18, 0x18, 0x22, 0x23, 0x18, 0x18, 0x18,
0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
0x18);
dsi_dcs_write_seq(dsi, 0xd6, 0x18, 0x18, 0x19, 0x19, 0x1b, 0x1b, 0x1a,
0x1a, 0x03, 0x02, 0x01, 0x00, 0x07, 0x06, 0x05, 0x04,
0x23, 0x22, 0x18, 0x18, 0x21, 0x20, 0x18, 0x18, 0x18,
0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
0x18);
- dsi_dcs_write_seq(dsi, 0xe0, 0x00, 0x03, 0x09, 0x11, 0x11, 0x14, 0x18,
0x16, 0x2e, 0x3d, 0x4d, 0x4d, 0x58, 0x6c, 0x72, 0x78,
0x88, 0x8b, 0x86, 0xa4, 0xb2, 0x58, 0x55, 0x59, 0x5b,
0x5d, 0x60, 0x64, 0x7f, 0x00, 0x03, 0x09, 0x0f, 0x11,
0x14, 0x18, 0x16, 0x2e, 0x3d, 0x4d, 0x4d, 0x58, 0x6d,
0x73, 0x78, 0x88, 0x8b, 0x87, 0xa5, 0xb2, 0x58, 0x55,
0x58, 0x5b, 0x5d, 0x61, 0x65, 0x7f);
- dsi_dcs_write_seq(dsi, 0xcc, 0x0b);
- dsi_dcs_write_seq(dsi, 0xc0, 0x1f, 0x31);
- dsi_dcs_write_seq(dsi, 0xb6, 0xc4, 0xc4);
- dsi_dcs_write_seq(dsi, 0xbd, 0x01);
- dsi_dcs_write_seq(dsi, 0xb1, 0x00);
- dsi_dcs_write_seq(dsi, 0xbd, 0x00);
- dsi_dcs_write_seq(dsi, 0xc6, 0xef);
- dsi_dcs_write_seq(dsi, 0xd4, 0x02);
- dsi_dcs_write_seq(dsi, 0x11);
- dsi_dcs_write_seq(dsi, 0x29);
- ret = mipi_dsi_dcs_set_tear_on(dsi, 1);
- if (ret < 0) {
dev_err(ctx->dev, "failed to set tear on: %d\n", ret);
return ret;
- }
- msleep(60);
- return 0;
+}
+static const struct drm_display_mode ltk050h3148w_mode = {
- .hdisplay = 720,
- .hsync_start = 720 + 12,
- .hsync_end = 720 + 12 + 6,
- .htotal = 720 + 12 + 6 + 24,
- .vdisplay = 1280,
- .vsync_start = 1280 + 9,
- .vsync_end = 1280 + 9 + 2,
- .vtotal = 1280 + 9 + 2 + 16,
- .clock = 59756,
- .width_mm = 62,
- .height_mm = 110,
+};
+static const struct ltk050h3146w_desc ltk050h3148w_data = {
- .mode = <k050h3148w_mode,
- .init = ltk050h3148w_init_sequence,
- .mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+};
static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx) { struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); @@ -657,6 +740,10 @@ static const struct of_device_id ltk050h3146w_of_match[] = { .compatible = "leadtek,ltk050h3146w-a2", .data = <k050h3146w_a2_data, },
- {
.compatible = "leadtek,ltk050h3148w",
.data = <k050h3148w_data,
- }, { /* sentinel */ }
}; MODULE_DEVICE_TABLE(of, ltk050h3146w_of_match); -- 2.34.1
From: Quentin Schulz quentin.schulz@theobroma-systems.com
The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving controller is a Himax HX8394-F, slightly different from LTK050H3146W by its init sequence, mode details and mode flags.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com --- .../devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml index 3715882b63b6..63d2a00348e9 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -17,6 +17,7 @@ properties: enum: - leadtek,ltk050h3146w - leadtek,ltk050h3146w-a2 + - leadtek,ltk050h3148w reg: true backlight: true reset-gpios: true
On Mon, 31 Jan 2022 17:47:23 +0100, quentin.schulz@theobroma-systems.com wrote:
From: Quentin Schulz quentin.schulz@theobroma-systems.com
The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving controller is a Himax HX8394-F, slightly different from LTK050H3146W by its init sequence, mode details and mode flags.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com
.../devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml | 1 + 1 file changed, 1 insertion(+)
Acked-by: Rob Herring robh@kernel.org
Hi,
On Mon 31 Jan 22, 17:47, quentin.schulz@theobroma-systems.com wrote:
From: Quentin Schulz quentin.schulz@theobroma-systems.com
The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving controller is a Himax HX8394-F, slightly different from LTK050H3146W by its init sequence, mode details and mode flags.
No difference needed in the binding at all then, I suppose.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com
Reviewed-by: Paul Kocialkowski paul.kocialkowski@bootlin.com
Cheers,
Paul
.../devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml index 3715882b63b6..63d2a00348e9 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -17,6 +17,7 @@ properties: enum: - leadtek,ltk050h3146w - leadtek,ltk050h3146w-a2
reg: true backlight: true reset-gpios: true- leadtek,ltk050h3148w
-- 2.34.1
Hi all,
Seems I'm not the only one who forgot about this patch series, so, kindly pinging :)
Thanks! Quentin
On 1/31/22 17:47, quentin.schulz@theobroma-systems.com wrote:
From: Quentin Schulz quentin.schulz@theobroma-systems.com
To prepare for a new display to be supported by this driver which has a slightly different set of DSI mode related flags, let's move the currently hardcoded mode flags to the .data field of of_device_id structure.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com
drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c index a5a414920430..67eb474e28c6 100644 --- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c @@ -25,6 +25,7 @@ struct ltk050h3146w_cmd {
struct ltk050h3146w; struct ltk050h3146w_desc {
- const unsigned long mode_flags; const struct drm_display_mode *mode; int (*init)(struct ltk050h3146w *ctx); };
@@ -339,6 +340,8 @@ static const struct drm_display_mode ltk050h3146w_mode = { static const struct ltk050h3146w_desc ltk050h3146w_data = { .mode = <k050h3146w_mode, .init = ltk050h3146w_init_sequence,
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
};
static int ltk050h3146w_a2_select_page(struct ltk050h3146w *ctx, int page)
@@ -433,6 +436,8 @@ static const struct drm_display_mode ltk050h3146w_a2_mode = { static const struct ltk050h3146w_desc ltk050h3146w_a2_data = { .mode = <k050h3146w_a2_mode, .init = ltk050h3146w_a2_init_sequence,
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
};
static int ltk050h3146w_unprepare(struct drm_panel *panel)
@@ -592,8 +597,7 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
dsi->lanes = 4; dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
dsi->mode_flags = ctx->panel_desc->mode_flags;
drm_panel_init(&ctx->panel, &dsi->dev, <k050h3146w_funcs, DRM_MODE_CONNECTOR_DSI);
Hi,
On Mon 31 Jan 22, 17:47, quentin.schulz@theobroma-systems.com wrote:
From: Quentin Schulz quentin.schulz@theobroma-systems.com
To prepare for a new display to be supported by this driver which has a slightly different set of DSI mode related flags, let's move the currently hardcoded mode flags to the .data field of of_device_id structure.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com
LGTM:
Reviewed-by: Paul Kocialkowski paul.kocialkowski@bootlin.com
Cheers,
Paul
drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c index a5a414920430..67eb474e28c6 100644 --- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c @@ -25,6 +25,7 @@ struct ltk050h3146w_cmd {
struct ltk050h3146w; struct ltk050h3146w_desc {
- const unsigned long mode_flags; const struct drm_display_mode *mode; int (*init)(struct ltk050h3146w *ctx);
}; @@ -339,6 +340,8 @@ static const struct drm_display_mode ltk050h3146w_mode = { static const struct ltk050h3146w_desc ltk050h3146w_data = { .mode = <k050h3146w_mode, .init = ltk050h3146w_init_sequence,
- .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
};
static int ltk050h3146w_a2_select_page(struct ltk050h3146w *ctx, int page) @@ -433,6 +436,8 @@ static const struct drm_display_mode ltk050h3146w_a2_mode = { static const struct ltk050h3146w_desc ltk050h3146w_a2_data = { .mode = <k050h3146w_a2_mode, .init = ltk050h3146w_a2_init_sequence,
- .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
};
static int ltk050h3146w_unprepare(struct drm_panel *panel) @@ -592,8 +597,7 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
dsi->lanes = 4; dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
dsi->mode_flags = ctx->panel_desc->mode_flags;
drm_panel_init(&ctx->panel, &dsi->dev, <k050h3146w_funcs, DRM_MODE_CONNECTOR_DSI);
-- 2.34.1
dri-devel@lists.freedesktop.org