Hello!
With new 3.19-rc1 kernel every time when I open LID on my laptop, kernel prints these error lines to dmesg:
[25566.368133] [drm:hsw_unclaimed_reg_detect.isra.6 [i915]] *ERROR* Unclaimed register detected. Please use the i915.mmio_debug=1 to debug this problem. [25566.368134] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt [25566.368192] [drm:hsw_unclaimed_reg_detect.isra.6 [i915]] *ERROR* Unclaimed register detected. Please use the i915.mmio_debug=1 to debug this problem. [25566.368232] [drm:hsw_unclaimed_reg_detect.isra.6 [i915]] *ERROR* Unclaimed register detected. Please use the i915.mmio_debug=1 to debug this problem.<4>[25568.446011] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [25568.447018] pci_bus 0000:02: Allocating resources [25568.447055] pci_bus 0000:03: Allocating resources [25568.447135] pci_bus 0000:04: Allocating resources [25568.447168] pci_bus 0000:05: Allocating resources [25568.447195] pci_bus 0000:06: Allocating resources [25568.447228] pci_bus 0000:0e: Allocating resources [25568.447323] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [25568.447557] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [25568.447735] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [25568.447847] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [25568.448399] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [25568.448438] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [25568.448566] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown) [25568.448572] acpi INT33C2:00: Cannot transition to non-D0 state from D3 [25568.448577] acpi MSFT0002:00: Cannot transition to power state D3cold for parent in (unknown) [25568.448581] acpi ELAN1010:00: Cannot transition to power state D3cold for parent in (unknown) [25568.448587] acpi INT33C3:00: Cannot transition to non-D0 state from D3 [25568.448590] acpi INT33C0:00: Cannot transition to non-D0 state from D3 [25568.448594] acpi INT33C1:00: Cannot transition to non-D0 state from D3 [25568.448598] acpi INT33C4:00: Cannot transition to non-D0 state from D3 [25568.448602] acpi INT33C5:00: Cannot transition to non-D0 state from D3 [25568.448623] acpi device:41: Cannot transition to power state D3cold for parent in (unknown) [25568.448627] acpi INT33C6:00: Cannot transition to non-D0 state from D3 [25568.448890] pci_bus 0000:01: Allocating resources [25568.448905] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [25568.449064] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [25568.449472] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
With older kernel (3.13) I do not see these errors, so it is regression. Can you look at it? If it is needed, I can provide other logs, ACPI/DSTD dumps, etc.
On Wednesday, December 24, 2014 07:51:48 PM Pali Rohár wrote:
--nextPart5943893.pKyMBm5Emp Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable
Hello!
With new 3.19-rc1 kernel every time when I open LID on my laptop, kernel pr= ints these error lines to dmesg:
Does your syste suspend when the lid is closed and resume when it is open?
[25566.368133] [drm:hsw_unclaimed_reg_detect.isra.6 [i915]] *ERROR* Unclaim= ed register detected. Please use the i915.mmio_debug=3D1 to debug this prob= lem. [25566.368134] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed reg= ister before interrupt [25566.368192] [drm:hsw_unclaimed_reg_detect.isra.6 [i915]] *ERROR* Unclaim= ed register detected. Please use the i915.mmio_debug=3D1 to debug this prob= lem. [25566.368232] [drm:hsw_unclaimed_reg_detect.isra.6 [i915]] *ERROR* Unclaim= ed register detected. Please use the i915.mmio_debug=3D1 to debug this prob= lem.<4>[25568.446011] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2]= =20 has bogus alignment
The above messages are from i915 and don't seem to be related to ACPI.
[25568.447018] pci_bus 0000:02: Allocating resources [25568.447055] pci_bus 0000:03: Allocating resources [25568.447135] pci_bus 0000:04: Allocating resources [25568.447168] pci_bus 0000:05: Allocating resources [25568.447195] pci_bus 0000:06: Allocating resources [25568.447228] pci_bus 0000:0e: Allocating resources [25568.447323] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment [25568.447557] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment [25568.447735] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment [25568.447847] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment [25568.448399] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment [25568.448438] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment
The above too.
[25568.448566] acpi MSFT1111:00: Cannot transition to power state D3cold fo= r parent in (unknown) [25568.448572] acpi INT33C2:00: Cannot transition to non-D0 state from D3 [25568.448577] acpi MSFT0002:00: Cannot transition to power state D3cold fo= r parent in (unknown) [25568.448581] acpi ELAN1010:00: Cannot transition to power state D3cold fo= r parent in (unknown) [25568.448587] acpi INT33C3:00: Cannot transition to non-D0 state from D3 [25568.448590] acpi INT33C0:00: Cannot transition to non-D0 state from D3 [25568.448594] acpi INT33C1:00: Cannot transition to non-D0 state from D3 [25568.448598] acpi INT33C4:00: Cannot transition to non-D0 state from D3 [25568.448602] acpi INT33C5:00: Cannot transition to non-D0 state from D3 [25568.448623] acpi device:41: Cannot transition to power state D3cold for = parent in (unknown) [25568.448627] acpi INT33C6:00: Cannot transition to non-D0 state from D3
All of the above mean that power transitions were not carried out for some devices, because they were in unexpected power states to start with.
They are devices on the Intel LPSS as far as I can say (CCing Mika and Andy).
[25568.448890] pci_bus 0000:01: Allocating resources [25568.448905] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment [25568.449064] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment [25568.449472] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment
With older kernel (3.13) I do not see these errors, so it is regression.
It only is a regression if it leads to functional problems. Do you see any?
Ca=n you look at it? If it is needed, I can provide other logs, ACPI/DSTD dump= s, etc.
It looks like 3.13 didn't try to use some devices that are now used in 3.19-rc1 and something doesn't work entirely as expected.
On Friday 26 December 2014 16:12:49 Rafael J. Wysocki wrote:
On Wednesday, December 24, 2014 07:51:48 PM Pali Rohár wrote:
--nextPart5943893.pKyMBm5Emp Content-Type: Text/Plain;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Hello!
With new 3.19-rc1 kernel every time when I open LID on my laptop, kernel pr=
ints these error lines to dmesg:
Does your syste suspend when the lid is closed and resume when it is open?
No, I disabled all autosuspend and autohibernate settings. When I close LID system is running.
[25568.448566] acpi MSFT1111:00: Cannot transition to power state D3cold fo= r parent in (unknown) [25568.448572] acpi INT33C2:00: Cannot transition to non-D0 state from D3 [25568.448577] acpi MSFT0002:00: Cannot transition to power state D3cold fo= r parent in (unknown) [25568.448581] acpi ELAN1010:00: Cannot transition to power state D3cold fo= r parent in (unknown) [25568.448587] acpi INT33C3:00: Cannot transition to non-D0 state from D3 [25568.448590] acpi INT33C0:00: Cannot transition to non-D0 state from D3 [25568.448594] acpi INT33C1:00: Cannot transition to non-D0 state from D3 [25568.448598] acpi INT33C4:00: Cannot transition to non-D0 state from D3 [25568.448602] acpi INT33C5:00: Cannot transition to non-D0 state from D3 [25568.448623] acpi device:41: Cannot transition to power state D3cold for = parent in (unknown) [25568.448627] acpi INT33C6:00: Cannot transition to non-D0 state from D3
All of the above mean that power transitions were not carried out for some devices, because they were in unexpected power states to start with.
They are devices on the Intel LPSS as far as I can say (CCing Mika and Andy).
Just to note: all above acpi devices do not exist in 3.13 kernel, at least I do not see them in /sys/bus/acpi/.
[25568.448890] pci_bus 0000:01: Allocating resources [25568.448905] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment [25568.449064] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment [25568.449472] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bog= us alignment
With older kernel (3.13) I do not see these errors, so it is regression.
It only is a regression if it leads to functional problems. Do you see any?
Ok. I do not see functional problems, but I see above messages in dmesg log every time when I open LID.
Ca=n you look at it? If it is needed, I can provide other logs, ACPI/DSTD dump= s, etc.
It looks like 3.13 didn't try to use some devices that are now used in 3.19-rc1 and something doesn't work entirely as expected.
dri-devel@lists.freedesktop.org
-
Pali Rohár -
Rafael J. Wysocki