Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com --- Changes v2 -> v3: - select EFI_FB instead of depending on it Changes v1 -> v2: - use depends instead of select --- drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU + depends on FB select DRM_KMS_HELPER # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915 select ACPI_VIDEO if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI + select FB_EFI if EFI help Say yes for an experimental 2D KMS framebuffer driver for the Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and
Hi--
On 4/8/22 21:23, James Hilliard wrote:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Acked-by: Randy Dunlap rdunlap@infradead.org
Changes v2 -> v3:
- select EFI_FB instead of depending on it
Changes v1 -> v2:
- use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
- depends on FB select DRM_KMS_HELPER # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915 select ACPI_VIDEO if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI
That "select INPUT" is really bad -- but not your problem. In the entire kernel tree there are only 3 drivers that select INPUT, and they are all in drivers/gpu/drm/.
- select FB_EFI if EFI help Say yes for an experimental 2D KMS framebuffer driver for the Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and
thanks.
On Sat, Apr 9, 2022 at 6:23 AM James Hilliard james.hilliard1@gmail.com wrote:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Hi James, EFI_FB is its own driver and not needed by gma500 to drive its hardware. What makes you think it's required?
-Patrik
Changes v2 -> v3:
- select EFI_FB instead of depending on it
Changes v1 -> v2:
- use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FB select DRM_KMS_HELPER # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915 select ACPI_VIDEO if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPIselect FB_EFI if EFI help Say yes for an experimental 2D KMS framebuffer driver for the Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and-- 2.25.1
On Sun, Apr 10, 2022 at 1:36 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sat, Apr 9, 2022 at 6:23 AM James Hilliard james.hilliard1@gmail.com wrote:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Hi James, EFI_FB is its own driver and not needed by gma500 to drive its hardware. What makes you think it's required?
I wasn't getting any HDMI video output without it enabled for some reason, I assume it is doing some sort of initialization needed by gma500 during startup.
-Patrik
Changes v2 -> v3:
- select EFI_FB instead of depending on it
Changes v1 -> v2:
- use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FB select DRM_KMS_HELPER # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915 select ACPI_VIDEO if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPIselect FB_EFI if EFI help Say yes for an experimental 2D KMS framebuffer driver for the Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and-- 2.25.1
On Sun, Apr 10, 2022 at 9:40 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:36 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sat, Apr 9, 2022 at 6:23 AM James Hilliard james.hilliard1@gmail.com wrote:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Hi James, EFI_FB is its own driver and not needed by gma500 to drive its hardware. What makes you think it's required?
I wasn't getting any HDMI video output without it enabled for some reason, I assume it is doing some sort of initialization needed by gma500 during startup.
Then it sounds like you might just be using EFI_FB and not gma500. Can you provide the kernel log with drm.debug=0x1f set on kernel command-line.
What machine is this? I've seen very few gma500 devices with UEFI.
-Patrik
Changes v2 -> v3:
- select EFI_FB instead of depending on it
Changes v1 -> v2:
- use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FB select DRM_KMS_HELPER # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915 select ACPI_VIDEO if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPIselect FB_EFI if EFI help Say yes for an experimental 2D KMS framebuffer driver for the Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and-- 2.25.1
On Sun, Apr 10, 2022 at 1:52 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 9:40 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:36 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sat, Apr 9, 2022 at 6:23 AM James Hilliard james.hilliard1@gmail.com wrote:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Hi James, EFI_FB is its own driver and not needed by gma500 to drive its hardware. What makes you think it's required?
I wasn't getting any HDMI video output without it enabled for some reason, I assume it is doing some sort of initialization needed by gma500 during startup.
Then it sounds like you might just be using EFI_FB and not gma500. Can you provide the kernel log with drm.debug=0x1f set on kernel command-line.
Seems efifb loads first and then hands off to gma500
[ 0.000000] Linux version 5.17.1 (buildroot@james-x399) (x86_64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.02-439-ge14798fa29) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Thu Apr 7 00:14:30 MDT 2022 [ 0.000000] Command line: root=PARTUUID=9bc7b8cb-3b3a-994c-9dca-0abbc5055e4d rootwait drm.debug=0x1f console=tty1 [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] signal: max sigframe size: 1440 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf32cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf32d000-0x00000000cf374fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf375000-0x00000000cf385fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf386000-0x00000000cf38dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cf38e000-0x00000000cf3b5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf3b6000-0x00000000cf3b6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf3b7000-0x00000000cf3c6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf3c7000-0x00000000cf3d2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf3d3000-0x00000000cf3f7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf3f8000-0x00000000cf43afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf43b000-0x00000000cf5bafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf5bb000-0x00000000cf6e6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf6e7000-0x00000000cf6effff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf6f0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x021da018-0x021ea057] usable ==> usable [ 0.000000] e820: update [mem 0x021da018-0x021ea057] usable ==> usable [ 0.000000] e820: update [mem 0x020d9018-0x020e5857] usable ==> usable [ 0.000000] e820: update [mem 0x020d9018-0x020e5857] usable ==> usable [ 0.000000] e820: update [mem 0x02237018-0x02243857] usable ==> usable [ 0.000000] e820: update [mem 0x02237018-0x02243857] usable ==> usable [ 0.000000] e820: update [mem 0x02215018-0x0221d057] usable ==> usable [ 0.000000] e820: update [mem 0x02215018-0x0221d057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000020d9017] usable [ 0.000000] reserve setup_data: [mem 0x00000000020d9018-0x00000000020e5857] usable [ 0.000000] reserve setup_data: [mem 0x00000000020e5858-0x00000000021da017] usable [ 0.000000] reserve setup_data: [mem 0x00000000021da018-0x00000000021ea057] usable [ 0.000000] reserve setup_data: [mem 0x00000000021ea058-0x0000000002215017] usable [ 0.000000] reserve setup_data: [mem 0x0000000002215018-0x000000000221d057] usable [ 0.000000] reserve setup_data: [mem 0x000000000221d058-0x0000000002237017] usable [ 0.000000] reserve setup_data: [mem 0x0000000002237018-0x0000000002243857] usable [ 0.000000] reserve setup_data: [mem 0x0000000002243858-0x00000000cf32cfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cf32d000-0x00000000cf374fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cf375000-0x00000000cf385fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf386000-0x00000000cf38dfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000cf38e000-0x00000000cf3b5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf3b6000-0x00000000cf3b6fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cf3b7000-0x00000000cf3c6fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf3c7000-0x00000000cf3d2fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cf3d3000-0x00000000cf3f7fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf3f8000-0x00000000cf43afff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cf43b000-0x00000000cf5bafff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cf5bb000-0x00000000cf6e6fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf6e7000-0x00000000cf6effff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cf6f0000-0x00000000cfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] efi: EFI v2.00 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xcf386000 SMBIOS=0xf0480 ACPI=0xcf386000 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: /, BIOS 4.6.4 11/19/2012 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1862.252 MHz processor [ 0.001843] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001853] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001878] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.001928] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002223] last_pfn = 0xcf6f0 max_arch_pfn = 0x400000000 [ 0.007867] found SMP MP-table at [mem 0x000fce60-0x000fce6f] [ 0.010883] Secure boot disabled [ 0.010891] ACPI: Early table checksum verification disabled [ 0.010903] ACPI: RSDP 0x00000000CF386000 000024 (v02 _ ) [ 0.010915] ACPI: XSDT 0x00000000CF386068 00004C (v01 _ _ 01072009 AMI 00010013) [ 0.010931] ACPI: FACP 0x00000000CF38D538 0000F4 (v04 _ _ 01072009 AMI 00010013) [ 0.010948] ACPI: DSDT 0x00000000CF386140 0073F2 (v02 _ _ 00000A03 INTL 20051117) [ 0.010960] ACPI: FACS 0x00000000CF3D0F80 000040 [ 0.010970] ACPI: APIC 0x00000000CF38D630 000072 (v03 _ _ 01072009 AMI 00010013) [ 0.010982] ACPI: MCFG 0x00000000CF38D6A8 00003C (v01 _ _ 01072009 MSFT 00000097) [ 0.010993] ACPI: HPET 0x00000000CF38D6E8 000038 (v01 _ _ 01072009 AMI. 00000004) [ 0.011005] ACPI: SSDT 0x00000000CF38D720 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.011016] ACPI: Reserving FACP table memory at [mem 0xcf38d538-0xcf38d62b] [ 0.011023] ACPI: Reserving DSDT table memory at [mem 0xcf386140-0xcf38d531] [ 0.011029] ACPI: Reserving FACS table memory at [mem 0xcf3d0f80-0xcf3d0fbf] [ 0.011034] ACPI: Reserving APIC table memory at [mem 0xcf38d630-0xcf38d6a1] [ 0.011040] ACPI: Reserving MCFG table memory at [mem 0xcf38d6a8-0xcf38d6e3] [ 0.011045] ACPI: Reserving HPET table memory at [mem 0xcf38d6e8-0xcf38d71f] [ 0.011051] ACPI: Reserving SSDT table memory at [mem 0xcf38d720-0xcf38dd74] [ 0.011306] No NUMA configuration found [ 0.011310] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.011324] NODE_DATA(0) allocated [mem 0x12fff8000-0x12fffbfff] [ 0.011398] Zone ranges: [ 0.011402] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011409] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011416] Normal [mem 0x0000000100000000-0x000000012fffffff] [ 0.011422] Movable zone start for each node [ 0.011425] Early memory node ranges [ 0.011428] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.011433] node 0: [mem 0x0000000000100000-0x00000000cf32cfff] [ 0.011439] node 0: [mem 0x00000000cf43b000-0x00000000cf5bafff] [ 0.011444] node 0: [mem 0x00000000cf6e7000-0x00000000cf6effff] [ 0.011448] node 0: [mem 0x0000000100000000-0x000000012fffffff] [ 0.011454] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff] [ 0.011467] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.011542] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.047643] On node 0, zone DMA32: 270 pages in unavailable ranges [ 0.047665] On node 0, zone DMA32: 300 pages in unavailable ranges [ 0.056200] On node 0, zone Normal: 2320 pages in unavailable ranges [ 0.056604] ACPI: PM-Timer IO Port: 0x408 [ 0.056621] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.056644] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.056653] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.056659] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.056670] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.056674] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.056688] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.056796] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.056806] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.056815] PM: hibernation: Registered nosave memory: [mem 0x020d9000-0x020d9fff] [ 0.056824] PM: hibernation: Registered nosave memory: [mem 0x020e5000-0x020e5fff] [ 0.056833] PM: hibernation: Registered nosave memory: [mem 0x021da000-0x021dafff] [ 0.056842] PM: hibernation: Registered nosave memory: [mem 0x021ea000-0x021eafff] [ 0.056851] PM: hibernation: Registered nosave memory: [mem 0x02215000-0x02215fff] [ 0.056861] PM: hibernation: Registered nosave memory: [mem 0x0221d000-0x0221dfff] [ 0.056870] PM: hibernation: Registered nosave memory: [mem 0x02237000-0x02237fff] [ 0.056879] PM: hibernation: Registered nosave memory: [mem 0x02243000-0x02243fff] [ 0.056889] PM: hibernation: Registered nosave memory: [mem 0xcf32d000-0xcf374fff] [ 0.056893] PM: hibernation: Registered nosave memory: [mem 0xcf375000-0xcf385fff] [ 0.056897] PM: hibernation: Registered nosave memory: [mem 0xcf386000-0xcf38dfff] [ 0.056902] PM: hibernation: Registered nosave memory: [mem 0xcf38e000-0xcf3b5fff] [ 0.056906] PM: hibernation: Registered nosave memory: [mem 0xcf3b6000-0xcf3b6fff] [ 0.056910] PM: hibernation: Registered nosave memory: [mem 0xcf3b7000-0xcf3c6fff] [ 0.056914] PM: hibernation: Registered nosave memory: [mem 0xcf3c7000-0xcf3d2fff] [ 0.056918] PM: hibernation: Registered nosave memory: [mem 0xcf3d3000-0xcf3f7fff] [ 0.056922] PM: hibernation: Registered nosave memory: [mem 0xcf3f8000-0xcf43afff] [ 0.056932] PM: hibernation: Registered nosave memory: [mem 0xcf5bb000-0xcf6e6fff] [ 0.056942] PM: hibernation: Registered nosave memory: [mem 0xcf6f0000-0xcfffffff] [ 0.056946] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xdfffffff] [ 0.056950] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.056954] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.056959] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.056963] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.056967] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.056971] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed13fff] [ 0.056975] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed19fff] [ 0.056979] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.056983] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.056987] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.056992] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.056996] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.057000] PM: hibernation: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.057006] [mem 0xd0000000-0xdfffffff] available for PCI devices [ 0.057019] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.074396] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.077845] percpu: Embedded 53 pages/cpu s179544 r8192 d29352 u524288 [ 0.077881] pcpu-alloc: s179544 r8192 d29352 u524288 alloc=1*2097152 [ 0.077889] pcpu-alloc: [0] 0 1 2 3 [ 0.077983] Fallback order for Node 0: 0 [ 0.077995] Built 1 zonelists, mobility grouping on. Total pages: 1029091 [ 0.078001] Policy zone: Normal [ 0.078006] Kernel command line: root=PARTUUID=9bc7b8cb-3b3a-994c-9dca-0abbc5055e4d rootwait drm.debug=0x1f console=tty1 [ 0.081925] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.083866] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.083965] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.283958] Memory: 3982632K/4182356K available (18445K kernel code, 2861K rwdata, 5596K rodata, 1276K init, 2672K bss, 199464K reserved, 0K cma-reserved) [ 0.284116] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.285879] Dynamic Preempt: voluntary [ 0.285985] rcu: Preemptible hierarchical RCU implementation. [ 0.285992] rcu: RCU event tracing is enabled. [ 0.285996] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.286001] Trampoline variant of Tasks RCU enabled. [ 0.286004] Tracing variant of Tasks RCU enabled. [ 0.286007] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.286012] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.290237] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.290714] random: get_random_bytes called from start_kernel+0x49c/0x666 with crng_init=0 [ 0.290807] Console: colour dummy device 80x25 [ 0.291809] printk: console [tty1] enabled [ 0.291870] ACPI: Core revision 20211217 [ 0.292085] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.292125] APIC: Switch to symmetric I/O mode setup [ 0.292736] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.297126] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x35afc2065d6, max_idle_ns: 881590602360 ns [ 0.297153] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.50 BogoMIPS (lpj=1862252) [ 0.297170] pid_max: default: 32768 minimum: 301 [ 0.306882] LSM: Security Framework initializing [ 0.306923] SELinux: Initializing. [ 0.307014] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.307056] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.307535] Disabled fast string operations [ 0.307569] CPU0: Thermal monitoring enabled (TM1) [ 0.307597] process: using mwait in idle threads [ 0.307610] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 [ 0.307619] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 [ 0.325806] Freeing SMP alternatives memory: 48K [ 0.428747] smpboot: CPU0: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz (family: 0x6, model: 0x36, stepping: 0x1) [ 0.429135] cblist_init_generic: Setting adjustable number of callback queues. [ 0.429145] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.429145] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.429145] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver. [ 0.429145] ... version: 3 [ 0.429145] ... bit width: 40 [ 0.429145] ... generic registers: 2 [ 0.429145] ... value mask: 000000ffffffffff [ 0.429145] ... max period: 000000007fffffff [ 0.429145] ... fixed-purpose events: 3 [ 0.429145] ... event mask: 0000000700000003 [ 0.429145] rcu: Hierarchical SRCU implementation. [ 0.429856] smp: Bringing up secondary CPUs ... [ 0.430246] x86: Booting SMP configuration: [ 0.430261] .... node #0, CPUs: #1 [ 0.002494] Disabled fast string operations [ 0.431145] TSC synchronization [CPU#0 -> CPU#1]: [ 0.431145] Measured 3213 cycles TSC warp between CPUs, turning off TSC clock. [ 0.431145] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.431497] #2 [ 0.002494] Disabled fast string operations [ 0.432480] #3 [ 0.002494] Disabled fast string operations [ 0.432627] smp: Brought up 1 node, 4 CPUs [ 0.432627] smpboot: Max logical packages: 1 [ 0.432627] smpboot: Total of 4 processors activated (14898.01 BogoMIPS) [ 0.434151] devtmpfs: initialized [ 0.434574] ACPI: PM: Registering ACPI NVS region [mem 0xcf32d000-0xcf374fff] (294912 bytes) [ 0.434574] ACPI: PM: Registering ACPI NVS region [mem 0xcf3b6000-0xcf3b6fff] (4096 bytes) [ 0.434574] ACPI: PM: Registering ACPI NVS region [mem 0xcf3c7000-0xcf3d2fff] (49152 bytes) [ 0.434574] ACPI: PM: Registering ACPI NVS region [mem 0xcf3f8000-0xcf43afff] (274432 bytes) [ 0.434574] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.434574] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.435238] PM: RTC time: 19:56:57, date: 2022-04-10 [ 0.435474] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.435792] audit: initializing netlink subsys (disabled) [ 0.435835] audit: type=2000 audit(1649620616.143:1): state=initialized audit_enabled=0 res=1 [ 0.436262] thermal_sys: Registered thermal governor 'step_wise' [ 0.436269] thermal_sys: Registered thermal governor 'user_space' [ 0.436338] cpuidle: using governor menu [ 0.436455] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.436481] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.436505] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 0.437283] PCI: Using configuration type 1 for base access [ 0.446373] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.447235] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.447335] ACPI: Added _OSI(Module Device) [ 0.447335] ACPI: Added _OSI(Processor Device) [ 0.447336] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.447344] ACPI: Added _OSI(Processor Aggregator Device) [ 0.447353] ACPI: Added _OSI(Linux-Dell-Video) [ 0.447361] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.447370] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.457124] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.459422] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.460711] ACPI: Dynamic OEM Table Load: [ 0.460744] ACPI: SSDT 0xFFFF9AAAC02C9800 0006D5 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.462769] ACPI: Dynamic OEM Table Load: [ 0.462791] ACPI: SSDT 0xFFFF9AAAC09B40C0 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.466221] ACPI: Interpreter enabled [ 0.466279] ACPI: PM: (supports S0 S1 S4 S5) [ 0.466290] ACPI: Using IOAPIC for interrupt routing [ 0.466375] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.467145] ACPI: Enabled 12 GPEs in block 00 to 1F [ 0.489196] ACPI: PM: Power Resource [FN00] [ 0.491177] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.491208] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.491333] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.491347] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.491358] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR) [ 0.491812] PCI host bridge to bus 0000:00 [ 0.491827] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.491840] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.491851] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] [ 0.491864] pci_bus 0000:00: root bus resource [mem 0xcf800000-0xfebfffff window] [ 0.491877] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.491914] pci 0000:00:00.0: [8086:0bf3] type 00 class 0x060000 [ 0.492182] pci 0000:00:02.0: [8086:0be2] type 00 class 0x030000 [ 0.492206] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff] [ 0.492222] pci 0000:00:02.0: reg 0x14: [io 0xf100-0xf107] [ 0.492267] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.492557] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.492598] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit] [ 0.492748] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.492999] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.493195] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.493449] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.493633] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.493890] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.494071] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.494332] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.494511] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.494757] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.494843] pci 0000:00:1d.0: reg 0x20: [io 0xf0a0-0xf0bf] [ 0.495084] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.495179] pci 0000:00:1d.1: reg 0x20: [io 0xf080-0xf09f] [ 0.495428] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.495514] pci 0000:00:1d.2: reg 0x20: [io 0xf060-0xf07f] [ 0.495760] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.495845] pci 0000:00:1d.3: reg 0x20: [io 0xf040-0xf05f] [ 0.496117] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.496167] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff] [ 0.496311] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.496534] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.496855] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 [ 0.497224] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 [ 0.497262] pci 0000:00:1f.2: reg 0x10: [io 0xf0f0-0xf0f7] [ 0.497286] pci 0000:00:1f.2: reg 0x14: [io 0xf0e0-0xf0e3] [ 0.497309] pci 0000:00:1f.2: reg 0x18: [io 0xf0d0-0xf0d7] [ 0.497330] pci 0000:00:1f.2: reg 0x1c: [io 0xf0c0-0xf0c3] [ 0.497353] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf02f] [ 0.497375] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff] [ 0.497458] pci 0000:00:1f.2: PME# supported from D3hot [ 0.497676] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.497743] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.498038] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.498194] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.498240] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.498293] pci 0000:02:00.0: reg 0x18: [mem 0xdfe04000-0xdfe04fff 64bit pref] [ 0.498333] pci 0000:02:00.0: reg 0x20: [mem 0xdfe00000-0xdfe03fff 64bit pref] [ 0.498520] pci 0000:02:00.0: supports D1 D2 [ 0.498531] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.498849] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.498867] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.498881] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.499021] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.499067] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.499120] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref] [ 0.499169] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref] [ 0.499358] pci 0000:03:00.0: supports D1 D2 [ 0.499369] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.499686] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.499704] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.499719] pci 0000:00:1c.2: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.499862] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601 [ 0.499910] pci 0000:04:00.0: reg 0x10: [io 0xc050-0xc057] [ 0.499939] pci 0000:04:00.0: reg 0x14: [io 0xc040-0xc043] [ 0.499967] pci 0000:04:00.0: reg 0x18: [io 0xc030-0xc037] [ 0.499995] pci 0000:04:00.0: reg 0x1c: [io 0xc020-0xc023] [ 0.500023] pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc01f] [ 0.500051] pci 0000:04:00.0: reg 0x24: [mem 0xdfc00000-0xdfc001ff] [ 0.500260] pci 0000:04:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:1c.3 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 0.500483] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.500500] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.500515] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.500568] pci_bus 0000:05: extended config space not accessible [ 0.500670] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.500698] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.500711] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.500724] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000fffff window] (subtractive decode) [ 0.500737] pci 0000:00:1e.0: bridge window [mem 0xcf800000-0xfebfffff window] (subtractive decode) [ 0.503322] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.503491] ACPI: PCI: Interrupt link LNKB configured for IRQ 7 [ 0.503660] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.503820] ACPI: PCI: Interrupt link LNKD configured for IRQ 5 [ 0.503978] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.503990] ACPI: PCI: Interrupt link LNKE disabled [ 0.504157] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.504169] ACPI: PCI: Interrupt link LNKF disabled [ 0.504331] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.504493] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 0.505291] iommu: Default domain type: Translated [ 0.505307] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.505358] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.505358] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.505358] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.505358] vgaarb: loaded [ 0.505399] SCSI subsystem initialized [ 0.505431] libata version 3.00 loaded. [ 0.505431] ACPI: bus type USB registered [ 0.505431] usbcore: registered new interface driver usbfs [ 0.505431] usbcore: registered new interface driver hub [ 0.505431] usbcore: registered new device driver usb [ 0.505438] mc: Linux media interface: v0.10 [ 0.505468] videodev: Linux video capture interface: v2.00 [ 0.505492] pps_core: LinuxPPS API ver. 1 registered [ 0.505501] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.506164] PTP clock support registered [ 0.506304] Registered efivars operations [ 0.506616] Advanced Linux Sound Architecture Driver Initialized. [ 0.506961] NetLabel: Initializing [ 0.506971] NetLabel: domain hash size = 128 [ 0.506978] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.507178] NetLabel: unlabeled traffic allowed by default [ 0.507242] PCI: Using ACPI for IRQ routing [ 0.520584] PCI: pci_cache_line_size set to 64 bytes [ 0.520681] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.520695] e820: reserve RAM buffer [mem 0x020d9018-0x03ffffff] [ 0.520702] e820: reserve RAM buffer [mem 0x021da018-0x03ffffff] [ 0.520707] e820: reserve RAM buffer [mem 0x02215018-0x03ffffff] [ 0.520711] e820: reserve RAM buffer [mem 0x02237018-0x03ffffff] [ 0.520714] e820: reserve RAM buffer [mem 0xcf32d000-0xcfffffff] [ 0.520719] e820: reserve RAM buffer [mem 0xcf5bb000-0xcfffffff] [ 0.520723] e820: reserve RAM buffer [mem 0xcf6f0000-0xcfffffff] [ 0.520740] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.520740] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.522237] clocksource: Switched to clocksource hpet [ 0.562334] VFS: Disk quotas dquot_6.6.0 [ 0.562397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.562589] pnp: PnP ACPI init [ 0.563122] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.563407] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.563430] system 00:01: [io 0xffff] has been reserved [ 0.563447] system 00:01: [io 0xffff] has been reserved [ 0.563463] system 00:01: [io 0xffff] has been reserved [ 0.563479] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.563495] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.563512] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.563743] system 00:02: [io 0x06a0-0x06af] has been reserved [ 0.563764] system 00:02: [io 0x06b0-0x06ef] has been reserved [ 0.564448] system 00:04: [io 0x0a00-0x0a1f] has been reserved [ 0.564471] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.565772] pnp 00:07: [dma 3] [ 0.566809] pnp 00:08: [dma 0 disabled] [ 0.567667] pnp 00:09: [dma 0 disabled] [ 0.568706] ACPI: IRQ 10 override to edge, high [ 0.568730] pnp 00:0b: [dma 0 disabled] [ 0.569624] ACPI: IRQ 10 override to edge, high [ 0.569645] pnp 00:0c: [dma 0 disabled] [ 0.570533] ACPI: IRQ 10 override to edge, high [ 0.570558] pnp 00:0d: [dma 0 disabled] [ 0.571452] ACPI: IRQ 10 override to edge, high [ 0.571472] pnp 00:0e: [dma 0 disabled] [ 0.571888] system 00:0f: [io 0x04d0-0x04d1] has been reserved [ 0.572364] system 00:10: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.572387] system 00:10: [mem 0x00000000-0x00003fff] could not be reserved [ 0.572405] system 00:10: [mem 0x00000000-0x00000fff] could not be reserved [ 0.572421] system 00:10: [mem 0x00000000-0x00000fff] could not be reserved [ 0.572438] system 00:10: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.573101] system 00:11: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.573123] system 00:11: [mem 0xe0000000-0xefffffff] has been reserved [ 0.573706] system 00:12: [io 0x0400-0x047f] has been reserved [ 0.573727] system 00:12: [io 0x0500-0x053f] has been reserved [ 0.573749] system 00:12: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.573767] system 00:12: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.573784] system 00:12: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.573800] system 00:12: [mem 0xfed20000-0xfed8ffff] could not be reserved [ 0.573817] system 00:12: [mem 0xffe00000-0xffffffff] has been reserved [ 0.573854] pnp: PnP ACPI: found 19 devices [ 0.585160] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.585277] NET: Registered PF_INET protocol family [ 0.585547] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.587680] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.587738] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.587950] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.588337] TCP: Hash tables configured (established 32768 bind 32768) [ 0.588594] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.588672] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.588878] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.589273] RPC: Registered named UNIX socket transport module. [ 0.589292] RPC: Registered udp transport module. [ 0.589303] RPC: Registered tcp transport module. [ 0.589313] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.589993] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.590020] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.590045] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.590069] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.590094] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.590119] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.590192] pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0000000-0xd01fffff] [ 0.590220] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0200000-0xd03fffff 64bit pref] [ 0.590246] pci 0000:00:1c.1: BAR 9: assigned [mem 0xd0400000-0xd05fffff 64bit pref] [ 0.590272] pci 0000:00:1c.2: BAR 9: assigned [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.590297] pci 0000:00:1c.3: BAR 9: assigned [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.590319] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.590340] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.590357] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.590377] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff] [ 0.590396] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] [ 0.590422] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.590436] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.590456] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.590474] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd05fffff 64bit pref] [ 0.590500] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.590514] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.590534] pci 0000:00:1c.2: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.590552] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.590577] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.590592] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.590612] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.590630] pci 0000:00:1c.3: bridge window [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.590656] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.590687] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.590702] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.590717] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window] [ 0.590733] pci_bus 0000:00: resource 7 [mem 0xcf800000-0xfebfffff window] [ 0.590749] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.590763] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd01fffff] [ 0.590778] pci_bus 0000:01: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref] [ 0.590795] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.590810] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff] [ 0.590824] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref] [ 0.590842] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.590856] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff] [ 0.590871] pci_bus 0000:03: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.590889] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.590903] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff] [ 0.590918] pci_bus 0000:04: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.590935] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.590950] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.590965] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000fffff window] [ 0.590981] pci_bus 0000:05: resource 7 [mem 0xcf800000-0xfebfffff window] [ 0.619369] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x720 took 26010 usecs [ 0.619458] PCI: CLS 64 bytes, default 64 [ 0.619487] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.619499] software IO TLB: mapped [mem 0x00000000cb32d000-0x00000000cf32d000] (64MB) [ 1.316623] Initialise system trusted keyrings [ 1.316813] workingset: timestamp_bits=56 max_order=20 bucket_order=0 [ 1.322483] NFS: Registering the id_resolver key type [ 1.322516] Key type id_resolver registered [ 1.322525] Key type id_legacy registered [ 1.322588] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.322605] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.322615] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.337474] NET: Registered PF_ALG protocol family [ 1.337496] xor: measuring software checksum speed [ 1.338956] prefetch64-sse : 6898 MB/sec [ 1.340591] generic_sse : 6208 MB/sec [ 1.340602] xor: using function: prefetch64-sse (6898 MB/sec) [ 1.340615] Key type asymmetric registered [ 1.340623] Asymmetric key parser 'x509' registered [ 1.340630] Asymmetric key parser 'pkcs8' registered [ 1.340939] kworker/u8:0 (52) used greatest stack depth: 14736 bytes left [ 1.341587] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.341654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.341668] io scheduler mq-deadline registered [ 1.341676] io scheduler kyber registered [ 1.343449] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.343587] ACPI: button: Power Button [PWRB] [ 1.343693] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.343767] ACPI: button: Sleep Button [SLPB] [ 1.343872] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.343974] ACPI: button: Power Button [PWRF] [ 1.345062] Monitor-Mwait will be used to enter C-1 state [ 1.345084] ACPI: _PR_.CPU0: Found 1 idle states [ 1.345668] ACPI: _PR_.CPU1: Found 1 idle states [ 1.346135] ACPI: _PR_.CPU2: Found 1 idle states [ 1.346646] ACPI: _PR_.CPU3: Found 1 idle states [ 1.347793] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.347810] ACPI: thermal: Thermal Zone [THRM] (52 C) [ 1.348084] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.348096] ACPI: thermal: Thermal Zone [TZ00] (27 C) [ 1.348858] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.348872] ACPI: thermal: Thermal Zone [TZ01] (27 C) [ 1.349102] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.349317] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.349554] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.349776] 00:0b: ttyS4 at I/O 0x4e0 (irq = 10, base_baud = 115200) is a 16550A [ 1.349987] 00:0c: ttyS5 at I/O 0x4e8 (irq = 10, base_baud = 115200) is a 16550A [ 1.350233] 00:0d: ttyS6 at I/O 0x4f0 (irq = 10, base_baud = 115200) is a 16550A [ 1.350452] 00:0e: ttyS7 at I/O 0x4f8 (irq = 10, base_baud = 115200) is a 16550A [ 1.354411] Non-volatile memory driver v1.3 [ 1.354609] Linux agpgart interface v0.103 [ 1.354711] ACPI: bus type drm_connector registered [ 1.354743] [drm:drm_core_init] Initialized [ 1.359978] loop: module loaded [ 1.360217] ahci 0000:00:1f.2: version 3.0 [ 1.360556] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.360617] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.360634] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part [ 1.361827] scsi host0: ahci [ 1.362328] scsi host1: ahci [ 1.362709] scsi host2: ahci [ 1.363088] scsi host3: ahci [ 1.363280] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24 [ 1.363297] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24 [ 1.363309] ata3: DUMMY [ 1.363315] ata4: DUMMY [ 1.363744] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled [ 1.363822] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.363838] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 1.364683] scsi host4: ahci [ 1.365100] scsi host5: ahci [ 1.365287] ata5: SATA max UDMA/133 abar m512@0xdfc00000 port 0xdfc00100 irq 25 [ 1.365305] ata6: SATA max UDMA/133 abar m512@0xdfc00000 port 0xdfc00180 irq 25 [ 1.365647] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 1.365662] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 1.366267] e100: Intel(R) PRO/100 Network Driver [ 1.366279] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.366316] e1000: Intel(R) PRO/1000 Network Driver [ 1.366325] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.366368] e1000e: Intel(R) PRO/1000 Network Driver [ 1.366376] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.366427] sky2: driver version 1.30 [ 1.366747] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.368590] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 00:30:18:a1:77:72, XID 2c9, IRQ 26 [ 1.368614] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.368838] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.370455] r8169 0000:03:00.0 eth1: RTL8168evl/8111evl, 00:30:18:a1:77:73, XID 2c9, IRQ 27 [ 1.370480] r8169 0000:03:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.370767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.370782] ehci-pci: EHCI PCI platform driver [ 1.371054] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.371216] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.371249] ehci-pci 0000:00:1d.7: debug port 1 [ 1.375221] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000 [ 1.382188] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.382318] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 1.382335] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.382347] usb usb1: Product: EHCI Host Controller [ 1.382356] usb usb1: Manufacturer: Linux 5.17.1 ehci_hcd [ 1.382365] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.382700] hub 1-0:1.0: USB hub found [ 1.382727] hub 1-0:1.0: 8 ports detected [ 1.383461] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.383493] ohci-pci: OHCI PCI platform driver [ 1.383534] uhci_hcd: USB Universal Host Controller Interface driver [ 1.383740] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.383889] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.383945] uhci_hcd 0000:00:1d.0: irq 23, io port 0x0000f0a0 [ 1.384100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.384117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.384129] usb usb2: Product: UHCI Host Controller [ 1.384138] usb usb2: Manufacturer: Linux 5.17.1 uhci_hcd [ 1.384174] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.384499] hub 2-0:1.0: USB hub found [ 1.384525] hub 2-0:1.0: 2 ports detected [ 1.385050] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.385233] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.385317] uhci_hcd 0000:00:1d.1: irq 19, io port 0x0000f080 [ 1.385473] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.385490] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.385502] usb usb3: Product: UHCI Host Controller [ 1.385511] usb usb3: Manufacturer: Linux 5.17.1 uhci_hcd [ 1.385520] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.385821] hub 3-0:1.0: USB hub found [ 1.385848] hub 3-0:1.0: 2 ports detected [ 1.386402] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.386550] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.386627] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000f060 [ 1.386784] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.386801] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.386813] usb usb4: Product: UHCI Host Controller [ 1.386822] usb usb4: Manufacturer: Linux 5.17.1 uhci_hcd [ 1.386831] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.387130] hub 4-0:1.0: USB hub found [ 1.387185] hub 4-0:1.0: 2 ports detected [ 1.387718] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.387863] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.387946] uhci_hcd 0000:00:1d.3: irq 16, io port 0x0000f040 [ 1.388105] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.388122] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.388134] usb usb5: Product: UHCI Host Controller [ 1.388143] usb usb5: Manufacturer: Linux 5.17.1 uhci_hcd [ 1.388190] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.388763] hub 5-0:1.0: USB hub found [ 1.388791] hub 5-0:1.0: 2 ports detected [ 1.389289] usbcore: registered new interface driver usblp [ 1.389351] usbcore: registered new interface driver usb-storage [ 1.389421] usbcore: registered new interface driver ftdi_sio [ 1.389444] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.389650] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.390246] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.390265] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.390824] usbcore: registered new interface driver usbtouchscreen [ 1.390901] rtc_cmos 00:03: RTC can wake from S4 [ 1.391468] rtc_cmos 00:03: registered as rtc0 [ 1.391528] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.391645] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001) [ 1.391848] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.392495] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 1.394473] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.396410] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.396546] usbcore: registered new interface driver uvcvideo [ 1.396854] f71808e_wdt: Found f71869 watchdog chip, revision 32 [ 1.397378] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 1.397399] intel_pstate: CPU model not supported [ 1.397490] efifb: probing for efifb [ 1.397530] efifb: framebuffer at 0xcf800000, using 1876k, total 1875k [ 1.397542] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 1.397552] efifb: scrolling: redraw [ 1.397558] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.402084] Console: switching to colour frame buffer device 100x37 [ 1.406506] fb0: EFI VGA frame buffer device [ 1.406594] EFI Variables Facility v0.08 2004-May-17 [ 1.470383] hid: raw HID events driver (C) Jiri Kosina [ 1.470972] usbcore: registered new interface driver usbhid [ 1.471059] usbhid: USB HID core driver [ 1.471563] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 1.473478] Initializing XFRM netlink socket [ 1.473889] NET: Registered PF_INET6 protocol family [ 1.474876] Segment Routing with IPv6 [ 1.474963] In-situ OAM (IOAM) with IPv6 [ 1.475116] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.475587] NET: Registered PF_PACKET protocol family [ 1.477949] Key type dns_resolver registered [ 1.480940] microcode: sig=0x30661, pf=0x4, revision=0x10d [ 1.482806] snd_hda_intel 0000:00:1b.0: Cannot probe codecs, giving up [ 1.483674] microcode: Microcode Update Driver: v2.2. [ 1.485842] IPI shorthand broadcast: enabled [ 1.490405] registered taskstats version 1 [ 1.492582] Loading compiled-in X.509 certificates [ 1.499265] checking generic (cf800000 1d5000) vs hw (0 ffffffffffffffff) [ 1.499275] fb0: switching to gma500 from EFI VGA [ 1.501598] Console: switching to colour dummy device 80x25 [ 1.501939] [drm:psb_intel_opregion_setup] OpRegion detected at 0xcf3c7018 [ 1.501966] [drm:psb_intel_opregion_setup] Public ACPI methods supported [ 1.501972] [drm:psb_intel_opregion_setup] ASLE supported [ 1.502051] [drm:psb_intel_init_bios] Using VBT from OpRegion: $VBT CEDARVIEW d [ 1.502062] [drm:psb_intel_init_bios] LVDS VBT config bits: 0x1 [ 1.502071] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.502090] [drm:psb_intel_init_bios] No SDVO device info is found in VBT [ 1.502097] [drm:psb_intel_init_bios] EDP timing in vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.502104] [drm:psb_intel_init_bios] VBT reports EDP: Lane_count 1, Lane_rate 6, Bpp 18 [ 1.502110] [drm:psb_intel_init_bios] VBT reports EDP: VSwing 0, Preemph 0 [ 1.509997] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.510397] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.516270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm LVDSDDC_C [ 1.516930] [drm:cdv_intel_dp_init] i2c_init DPDDC-B [ 1.517442] [drm:cdv_intel_dp_aux_ch] dp_aux_ch timeout status 0x51440064 [ 1.517452] [drm:cdv_intel_dp_i2c_aux_ch] aux_ch failed -110 [ 1.517961] [drm:cdv_intel_dp_aux_ch] dp_aux_ch timeout status 0x51440064 [ 1.517967] [drm:cdv_intel_dp_i2c_aux_ch] aux_ch failed -110 [ 1.518670] [drm:cdv_intel_dp_init] i2c_init DPDDC-C [ 1.518879] [drm:cdv_intel_dp_i2c_aux_ch] aux_i2c nack [ 1.622178] usb 1-7: new high-speed USB device number 2 using ehci-pci [ 1.673651] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.673738] ata5: SATA link down (SStatus 0 SControl 300) [ 1.675672] ata1.00: ATA-11: ST8000VN004-2M2101, SC60, max UDMA/133 [ 1.688493] ata1.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.688952] ata1.00: Features: NCQ-sndrcv [ 1.703950] ata1.00: configured for UDMA/133 [ 1.704233] scsi 0:0:0:0: Direct-Access ATA ST8000VN004-2M21 SC60 PQ: 0 ANSI: 5 [ 1.704941] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.705107] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.705130] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.705225] sd 0:0:0:0: [sda] Write Protect is off [ 1.705244] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.705337] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.750390] sda: sda1 sda2 sda3 sda4 [ 1.751643] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.755049] usb 1-7: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 1.00 [ 1.755068] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.755080] usb 1-7: Product: Composite KVM Device [ 1.755089] usb 1-7: Manufacturer: PiKVM [ 1.755098] usb 1-7: SerialNumber: CAFEBABE [ 1.756928] input: PiKVM Composite KVM Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/0003:1D6B:0104.0001/input/input7 [ 1.808616] hid-generic 0003:1D6B:0104.0001: input,hidraw0: USB HID v1.01 Keyboard [PiKVM Composite KVM Device] on usb-0000:00:1d.7-7/input0 [ 1.810002] input: PiKVM Composite KVM Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.1/0003:1D6B:0104.0002/input/input8 [ 1.810256] hid-generic 0003:1D6B:0104.0002: input,hidraw1: USB HID v1.01 Mouse [PiKVM Composite KVM Device] on usb-0000:00:1d.7-7/input1 [ 1.810602] usb-storage 1-7:1.2: USB Mass Storage device detected [ 1.810991] scsi host6: usb-storage 1-7:1.2 [ 1.890844] [drm:drm_client_modeset_probe] [ 1.890862] [drm:drm_mode_object_get] OBJ ID: 37 (2) [ 1.890873] [drm:drm_mode_object_get] OBJ ID: 39 (2) [ 1.890880] [drm:drm_mode_object_get] OBJ ID: 41 (2) [ 1.890887] [drm:drm_mode_object_get] OBJ ID: 43 (2) [ 1.890894] [drm:drm_mode_object_get] OBJ ID: 47 (2) [ 1.890900] [drm:drm_mode_object_get] OBJ ID: 49 (2) [ 1.890908] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] [ 1.905172] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] status updated from unknown to disconnected [ 1.905183] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] disconnected [ 1.905194] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] [ 1.905201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] status updated from unknown to connected [ 1.909708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 1.909764] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] probed modes : [ 1.909772] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.909785] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] [ 2.009626] ata2: SATA link down (SStatus 0 SControl 300) [ 2.118811] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 2.118823] [drm:drm_add_display_info] non_desktop set to 0 [ 2.118830] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 2.118837] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 2.118843] [drm:drm_add_display_info] CEA VCDB 0x7f [ 2.118856] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] status updated from unknown to connected [ 2.313664] ata6: SATA link down (SStatus 0 SControl 300) [ 2.327912] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 2.327923] [drm:drm_add_display_info] non_desktop set to 0 [ 2.327929] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 2.327935] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 2.327941] [drm:drm_add_display_info] CEA VCDB 0x7f [ 2.327950] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 2.327961] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 2.327967] [drm:drm_add_display_info] non_desktop set to 0 [ 2.327973] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 2.327979] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 2.327985] [drm:drm_add_display_info] CEA VCDB 0x7f [ 2.327993] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (1) [ 2.328002] [drm:drm_add_edid_modes] ELD monitor Toshiba-H2C [ 2.328009] [drm:drm_add_edid_modes] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 2.328017] [drm:drm_add_edid_modes] ELD size 32, SAD count 0 [ 2.328024] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 2.328030] [drm:drm_add_display_info] non_desktop set to 0 [ 2.328036] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 2.328042] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 2.328048] [drm:drm_add_display_info] CEA VCDB 0x7f [ 2.329450] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] probed modes : [ 2.329460] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 2.329472] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 2.329483] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 2.329493] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 2.329504] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 2.329514] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 2.329525] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 2.329535] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.329546] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106470 1440 1520 1672 1904 900 901 907 934 0x40 0xa [ 2.329556] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 2.329567] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 2.329577] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 2.329588] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74250 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 2.329598] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74176 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 2.329609] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 25 74250 1280 3700 3740 3960 720 725 730 750 0x40 0x5 [ 2.329620] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59400 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 2.329630] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59341 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 2.329641] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 2.329651] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.329662] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 2.329672] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 2.329682] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 2.329693] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 2.329703] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 2.329714] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 2.329724] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 2.329735] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 2.329745] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0x5 [ 2.329756] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 2.329766] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 2.329776] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 2.329787] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 2.329797] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 2.329807] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 2.329818] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 2.329828] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 2.329839] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 2.329850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] [ 2.330361] [drm:cdv_intel_dp_aux_ch] dp_aux_ch timeout status 0x51440064 [ 2.330371] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] status updated from unknown to disconnected [ 2.330378] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] disconnected [ 2.330386] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] [ 2.362198] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm HDMIC [ 2.362206] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] status updated from unknown to disconnected [ 2.362214] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] disconnected [ 2.362221] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] [ 2.362431] [drm:cdv_intel_dp_detect] DPCD: Rev=10 LN_Rate=a LN_CNT=82 LN_DOWNSP=40 [ 2.363462] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 2.390107] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 2.390117] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 2.390124] [drm:drm_add_display_info] non_desktop set to 0 [ 2.390130] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 2.390140] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] status updated from unknown to connected [ 2.391173] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 2.417824] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 2.417834] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 2.417841] [drm:drm_add_display_info] non_desktop set to 0 [ 2.417847] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 2.417856] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (1) [ 2.417865] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 2.417871] [drm:drm_add_display_info] non_desktop set to 0 [ 2.417877] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 2.417885] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (1) [ 2.417894] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 2.417900] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 2.417906] [drm:drm_add_display_info] non_desktop set to 0 [ 2.417911] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 2.418055] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] probed modes : [ 2.418062] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 56120 1024 1072 1104 1184 768 771 775 790 0x48 0x9 [ 2.418073] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 50 46760 1024 1072 1104 1184 768 771 775 790 0x40 0x9 [ 2.418084] [drm:drm_client_modeset_probe] connector 37 enabled? no [ 2.418091] [drm:drm_client_modeset_probe] connector 39 enabled? yes [ 2.418097] [drm:drm_client_modeset_probe] connector 41 enabled? yes [ 2.418103] [drm:drm_client_modeset_probe] connector 43 enabled? no [ 2.418109] [drm:drm_client_modeset_probe] connector 47 enabled? no [ 2.418115] [drm:drm_client_modeset_probe] connector 49 enabled? yes [ 2.418122] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 39 [ 2.418129] [drm:drm_client_modeset_probe] looking for preferred mode on connector 39 0 [ 2.418135] [drm:drm_client_modeset_probe] found mode 1024x768 [ 2.418140] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 41 [ 2.418162] [drm:drm_client_modeset_probe] looking for preferred mode on connector 41 0 [ 2.418169] [drm:drm_client_modeset_probe] found mode 1280x720 [ 2.418175] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 49 [ 2.418180] [drm:drm_client_modeset_probe] looking for preferred mode on connector 49 0 [ 2.418186] [drm:drm_client_modeset_probe] found mode 1024x768 [ 2.418192] [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config [ 2.418204] [drm:drm_client_modeset_probe] desired mode 1280x720 set on crtc 32 (0,0) [ 2.418212] [drm:drm_mode_object_get] OBJ ID: 41 (2) [ 2.418219] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 34 (0,0) [ 2.418226] [drm:drm_mode_object_get] OBJ ID: 49 (2) [ 2.418233] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 2.418239] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 2.418246] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (3) [ 2.418252] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 2.418258] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 2.418264] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (3) [ 2.418275] gma500 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane [ 2.418285] gma500 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 1 primary plane [ 2.419518] fbcon: gma500drmfb (fb0) is primary device [ 2.419652] [drm:drm_crtc_helper_set_config] [ 2.419662] [drm:drm_crtc_helper_set_config] [CRTC:32:crtc-0] [FB:53] #connectors=1 (x y) (0 0) [ 2.419674] [drm:drm_crtc_helper_set_config] crtc has no fb, full mode set [ 2.419680] [drm:drm_crtc_helper_set_config] modes are different, full mode set [ 2.419686] [drm:drm_mode_debug_printmodeline] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.419695] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 2.419706] [drm:drm_mode_object_get] OBJ ID: 41 (2) [ 2.419713] [drm:drm_crtc_helper_set_config] encoder changed, full mode switch [ 2.419720] [drm:drm_crtc_helper_set_config] crtc changed, full mode switch [ 2.419725] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 2.419734] [drm:drm_crtc_helper_set_config] attempting to set mode from userspace [ 2.419739] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 2.419752] [drm:drm_crtc_helper_set_mode] [CRTC:32:crtc-0] [ 2.439774] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 2.442182] [drm:cdv_sb_write] 0x00008018: 0x0068a701 (before) [ 2.442192] [drm:cdv_sb_write] 0x00008018: 0x0068a701 [ 2.448175] [drm:cdv_sb_write] 0x00008018: 0x0068a701 (after) [ 2.451175] [drm:cdv_intel_crtc_mode_set] use their DPLL for pipe A/B [ 2.454176] [drm:cdv_sb_write] 0x00008010: 0x7e40221c (before) [ 2.454184] [drm:cdv_sb_write] 0x00008010: 0x7e40221c [ 2.460177] [drm:cdv_sb_write] 0x00008010: 0x7e40221c (after) [ 2.466175] [drm:cdv_sb_write] 0x00008008: 0x4800217f (before) [ 2.466184] [drm:cdv_sb_write] 0x00008008: 0x6c00217f [ 2.472175] [drm:cdv_sb_write] 0x00008008: 0x6c00217f (after) [ 2.478175] [drm:cdv_sb_write] 0x00008014: 0x06080157 (before) [ 2.478184] [drm:cdv_sb_write] 0x00008014: 0x84000157 [ 2.484175] [drm:cdv_sb_write] 0x00008014: 0x84000157 (after) [ 2.490175] [drm:cdv_sb_write] 0x0000801c: 0x05555000 (before) [ 2.490183] [drm:cdv_sb_write] 0x0000801c: 0x05554000 [ 2.496175] [drm:cdv_sb_write] 0x0000801c: 0x05554000 (after) [ 2.502175] [drm:cdv_sb_write] 0x00000120: 0x003000c4 (before) [ 2.502184] [drm:cdv_sb_write] 0x00000120: 0x003000c4 [ 2.508175] [drm:cdv_sb_write] 0x00000120: 0x003000c4 (after) [ 2.514175] [drm:cdv_sb_write] 0x00000220: 0x003000c4 (before) [ 2.514184] [drm:cdv_sb_write] 0x00000220: 0x003000c4 [ 2.520175] [drm:cdv_sb_write] 0x00000220: 0x003000c4 (after) [ 2.520334] [drm:cdv_intel_crtc_mode_set] Mode for pipe A: [ 2.520340] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 2.560517] [drm:drm_crtc_helper_set_mode] [ENCODER:42:TMDS-42] set [MODE:1280x720] [ 2.600723] gma500 0000:00:02.0: [drm:drm_calc_timestamping_constants] crtc 32: hwmode: htotal 1650, vtotal 750, vdisplay 720 [ 2.600734] gma500 0000:00:02.0: [drm:drm_calc_timestamping_constants] crtc 32: clock 74250 kHz framedur 16666666 linedur 22222 [ 2.600743] [drm:drm_crtc_helper_set_config] Setting connector DPMS state to on [ 2.600749] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] set DPMS on [ 2.680789] [drm:drm_mode_object_get] OBJ ID: 53 (1) [ 2.680800] [drm:drm_crtc_helper_set_config] [ 2.680805] [drm:drm_crtc_helper_set_config] [CRTC:34:crtc-1] [FB:53] #connectors=1 (x y) (0 0) [ 2.680842] [drm:drm_crtc_helper_set_config] crtc has no fb, full mode set [ 2.680852] [drm:drm_crtc_helper_set_config] modes are different, full mode set [ 2.680857] [drm:drm_mode_debug_printmodeline] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.680867] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 56120 1024 1072 1104 1184 768 771 775 790 0x48 0x9 [ 2.680877] [drm:drm_mode_object_get] OBJ ID: 49 (2) [ 2.680885] [drm:drm_crtc_helper_set_config] encoder changed, full mode switch [ 2.680891] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 2.680898] [drm:drm_crtc_helper_set_config] crtc changed, full mode switch [ 2.680903] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] to [CRTC:34:crtc-1] [ 2.680912] [drm:drm_crtc_helper_set_config] attempting to set mode from userspace [ 2.680917] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 56120 1024 1072 1104 1184 768 771 775 790 0x48 0x9 [ 2.680931] [drm:cdv_intel_dp_mode_fixup] Display port link bw 0a lane count 1 clock 270000 [ 2.680940] [drm:drm_crtc_helper_set_mode] [CRTC:34:crtc-1] [ 2.760970] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 289 270000 1024 1072 1104 1184 768 771 775 790 0x48 0x9 [ 2.763178] [drm:cdv_sb_write] 0x00008038: 0x0068a701 (before) [ 2.763187] [drm:cdv_sb_write] 0x00008038: 0x0068a701 [ 2.769175] [drm:cdv_sb_write] 0x00008038: 0x0068a701 (after) [ 2.772175] [drm:cdv_intel_crtc_mode_set] use their DPLL for pipe A/B [ 2.775176] [drm:cdv_sb_write] 0x00008030: 0x7e40221c (before) [ 2.775184] [drm:cdv_sb_write] 0x00008030: 0x7e40221c [ 2.781176] [drm:cdv_sb_write] 0x00008030: 0x7e40221c (after) [ 2.787175] [drm:cdv_sb_write] 0x00008028: 0x5900217f (before) [ 2.787184] [drm:cdv_sb_write] 0x00008028: 0x8500217f [ 2.793175] [drm:cdv_sb_write] 0x00008028: 0x8500217f (after) [ 2.799175] [drm:cdv_sb_write] 0x00008034: 0x16000157 (before) [ 2.799184] [drm:cdv_sb_write] 0x00008034: 0x55000157 [ 2.805175] [drm:cdv_sb_write] 0x00008034: 0x55000157 (after) [ 2.811175] [drm:cdv_sb_write] 0x0000803c: 0x85552000 (before) [ 2.811183] [drm:cdv_sb_write] 0x0000803c: 0x05551000 [ 2.817175] [drm:cdv_sb_write] 0x0000803c: 0x05551000 (after) [ 2.822472] scsi 6:0:0:0: CD-ROM Pi-KVM CD-ROM Drive 0515 PQ: 0 ANSI: 2 [ 2.823178] [drm:cdv_sb_write] 0x00002320: 0x003000c4 (before) [ 2.823188] [drm:cdv_sb_write] 0x00002320: 0x003000c4 [ 2.823298] sr 6:0:0:0: Power-on or device reset occurred [ 2.824655] random: fast init done [ 2.824949] sr 6:0:0:0: [sr0] scsi-1 drive [ 2.824955] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.826190] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 2.826357] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 2.829179] [drm:cdv_sb_write] 0x00002320: 0x003000c4 (after) [ 2.835177] [drm:cdv_sb_write] 0x00002420: 0x003000c4 (before) [ 2.835187] [drm:cdv_sb_write] 0x00002420: 0x003000c4 [ 2.841175] [drm:cdv_sb_write] 0x00002420: 0x003000c4 (after) [ 2.841335] [drm:cdv_intel_crtc_mode_set] Mode for pipe B: [ 2.841341] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 56120 1024 1072 1104 1184 768 771 775 790 0x48 0x9 [ 2.881517] [drm:drm_crtc_helper_set_mode] [ENCODER:50:TMDS-50] set [MODE:1024x768] [ 2.881527] [drm:cdv_intel_dp_mode_set] DP expected reg is 70000008 [ 2.961736] [drm:cdv_intel_dp_start_link_train] Link config [ 2.961946] [drm:cdv_intel_dp_start_link_train] Start train [ 2.961951] [drm:cdv_intel_dp_start_link_train] DP Link Train Set 0, Link_config a, 1 [ 2.962866] [drm:cdv_intel_dp_start_link_train] DP Link status 0, 0, 80, 0, 1, 0 [ 2.962877] [drm:cdv_intel_dp_start_link_train] DP Link Train Set 1, Link_config a, 1 [ 2.963791] [drm:cdv_intel_dp_start_link_train] DP Link status 1, 0, 80, 0, 1, 0 [ 2.963800] [drm:cdv_intel_dp_start_link_train] PT1 train is done [ 2.963805] [drm:cdv_intel_dp_complete_link_train] [ 2.963811] [drm:cdv_intel_dp_complete_link_train] DP Link Train Set 1, Link_config a, 1 [ 2.965525] [drm:cdv_intel_dp_complete_link_train] DP Link status 1, 0, 81, 0, 5, 0 [ 2.965536] [drm:cdv_intel_dp_complete_link_train] DP Link Train Set 9, Link_config a, 1 [ 2.967262] [drm:cdv_intel_dp_complete_link_train] DP Link status 1, 0, 81, 0, 9, 0 [ 2.967272] [drm:cdv_intel_dp_complete_link_train] DP Link Train Set 11, Link_config a, 1 [ 2.968986] [drm:cdv_intel_dp_complete_link_train] DP Link status 7, 0, 81, 0, 9, 0 [ 2.968996] [drm:cdv_intel_dp_complete_link_train] PT2 train is done [ 2.969207] gma500 0000:00:02.0: [drm:drm_calc_timestamping_constants] crtc 34: hwmode: htotal 1184, vtotal 790, vdisplay 768 [ 2.969217] gma500 0000:00:02.0: [drm:drm_calc_timestamping_constants] crtc 34: clock 56120 kHz framedur 16667141 linedur 21097 [ 2.969225] [drm:drm_crtc_helper_set_config] Setting connector DPMS state to on [ 2.969231] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] set DPMS on [ 2.969252] [drm:drm_mode_object_get] OBJ ID: 53 (2) [ 2.969259] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (3) [ 2.969264] [drm:drm_mode_object_get] OBJ ID: 53 (2) [ 2.969300] [drm:drm_crtc_helper_set_config] [ 2.969307] [drm:drm_crtc_helper_set_config] [CRTC:32:crtc-0] [FB:53] #connectors=1 (x y) (0 0) [ 2.969320] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 2.969328] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] to [CRTC:34:crtc-1] [ 2.969335] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 2.969341] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 2.969347] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 2.969352] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 2.969358] [drm:drm_crtc_helper_set_config] [ 2.969363] [drm:drm_crtc_helper_set_config] [CRTC:34:crtc-1] [FB:53] #connectors=1 (x y) (0 0) [ 2.969375] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 2.969383] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] to [CRTC:34:crtc-1] [ 2.969390] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 2.969396] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 2.969402] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 2.969407] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 2.975997] Console: switching to colour frame buffer device 128x45 [ 2.976012] [drm:drm_crtc_helper_set_config] [ 2.976019] [drm:drm_crtc_helper_set_config] [CRTC:32:crtc-0] [FB:53] #connectors=1 (x y) (0 0) [ 2.976031] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 2.976039] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] to [CRTC:34:crtc-1] [ 2.976046] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 2.976052] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 2.976058] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 2.976063] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 2.976069] [drm:drm_crtc_helper_set_config] [ 2.976074] [drm:drm_crtc_helper_set_config] [CRTC:34:crtc-1] [FB:53] #connectors=1 (x y) (0 0) [ 2.976085] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 2.976093] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] to [CRTC:34:crtc-1] [ 2.976100] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 2.976106] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 2.976112] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 2.976117] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 2.983381] gma500 0000:00:02.0: [drm] fb0: gma500drmfb frame buffer device [ 2.983583] [drm:drm_minor_register] [ 2.983592] [drm:drm_minor_register] [ 2.983788] [drm:drm_minor_register] new minor registered 0 [ 2.983824] [drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs [ 2.983888] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:37:VGA-1] generating connector hotplug event [ 2.983908] [drm:drm_sysfs_connector_add] adding "LVDS-1" to sysfs [ 2.983967] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:39:LVDS-1] generating connector hotplug event [ 2.983987] [drm:drm_sysfs_connector_add] adding "DVI-D-1" to sysfs [ 2.984049] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:41:DVI-D-1] generating connector hotplug event [ 2.984068] [drm:drm_sysfs_connector_add] adding "DP-1" to sysfs [ 2.984126] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:43:DP-1] generating connector hotplug event [ 2.984172] [drm:drm_sysfs_connector_add] adding "DVI-D-2" to sysfs [ 2.984253] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:47:DVI-D-2] generating connector hotplug event [ 2.984274] [drm:drm_sysfs_connector_add] adding "DP-2" to sysfs [ 2.984331] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:49:DP-2] generating connector hotplug event [ 2.984348] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0 [ 2.984606] PM: Magic number: 2:645:950 [ 2.984813] tty tty7: hash matches [ 2.984963] printk: console [netcon0] enabled [ 2.985037] netconsole: network logging started [ 2.985620] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.987930] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.988118] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.988274] cfg80211: failed to load regulatory.db [ 2.988434] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 2.994806] ALSA device list: [ 2.997853] No soundcards found. [ 3.000910] md: Waiting for all devices to be available before autodetect [ 3.003972] md: If you don't use raid, use raid=noautodetect [ 3.007037] md: Autodetecting RAID arrays. [ 3.010065] md: autorun ... [ 3.013002] md: ... autorun DONE. [ 3.050670] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none. [ 3.053703] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 3.071329] devtmpfs: mounted [ 3.075364] Freeing unused kernel image (initmem) memory: 1276K [ 3.078436] Write protecting the kernel read-only data: 26624k [ 3.083629] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 3.087192] Freeing unused kernel image (rodata/data gap) memory: 548K [ 3.090171] Run /sbin/init as init process [ 3.093030] with arguments: [ 3.093033] /sbin/init [ 3.093036] with environment: [ 3.093037] HOME=/ [ 3.093040] TERM=linux [ 3.454449] modprobe (131) used greatest stack depth: 13280 bytes left [ 3.866122] random: crng init done [ 3.869829] systemd[1]: Successfully credited entropy passed from boot loader. [ 3.888185] systemd[1]: systemd 250 running in system mode (-PAM -AUDIT -SELINUX -APPARMOR -IMA -SMACK -SECCOMP +GCRYPT -GNUTLS +OPENSSL -ACL +BLKID +CURL +ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 -LZ4 +XZ +ZLIB -ZSTD -BPF_FRAMEWORK +XKBCOMMON -UTMP -SYSVINIT default-hierarchy=unified) [ 3.909335] systemd[1]: Detected architecture x86-64. [ 3.958022] systemd[1]: Hostname set to <buildroot>. [ 4.035388] systemd[1]: Using hardware watchdog 'f71869 watchdog', version 0, device /dev/watchdog0 [ 4.038667] systemd[1]: Watchdog running with a timeout of 20s. [ 4.039199] [drm:drm_sysfs_hotplug_event] generating hotplug event [ 4.042583] gma500 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0] [ 4.042599] [drm:drm_client_modeset_probe] [ 4.042609] [drm:drm_mode_object_get] OBJ ID: 37 (2) [ 4.042622] [drm:drm_mode_object_get] OBJ ID: 39 (2) [ 4.042632] [drm:drm_mode_object_get] OBJ ID: 41 (4) [ 4.042641] [drm:drm_mode_object_get] OBJ ID: 43 (2) [ 4.042652] [drm:drm_mode_object_get] OBJ ID: 47 (2) [ 4.042662] [drm:drm_mode_object_get] OBJ ID: 49 (4) [ 4.042674] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] [ 4.057178] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] disconnected [ 4.057204] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] [ 4.061712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 4.061770] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] probed modes : [ 4.061778] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 4.061791] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] [ 4.226377] lvmconfig (145) used greatest stack depth: 13048 bytes left [ 4.273041] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 4.273060] [drm:drm_add_display_info] non_desktop set to 0 [ 4.273068] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 4.273074] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 4.273081] [drm:drm_add_display_info] CEA VCDB 0x7f [ 4.273095] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 4.489597] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 4.489614] [drm:drm_add_display_info] non_desktop set to 0 [ 4.489621] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 4.489628] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 4.489634] [drm:drm_add_display_info] CEA VCDB 0x7f [ 4.489645] [drm:drm_mode_object_put.part.0] OBJ ID: 54 (1) [ 4.489656] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 4.489663] [drm:drm_add_display_info] non_desktop set to 0 [ 4.489669] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 4.489675] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 4.489681] [drm:drm_add_display_info] CEA VCDB 0x7f [ 4.489689] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 4.489698] [drm:drm_add_edid_modes] ELD monitor Toshiba-H2C [ 4.489705] [drm:drm_add_edid_modes] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 4.489714] [drm:drm_add_edid_modes] ELD size 32, SAD count 0 [ 4.489720] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 4.489727] [drm:drm_add_display_info] non_desktop set to 0 [ 4.489732] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 4.489739] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 4.489744] [drm:drm_add_display_info] CEA VCDB 0x7f [ 4.491009] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 4.491024] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: VIRTUAL_X [ 4.491031] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 4.491041] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: VIRTUAL_X [ 4.491047] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 4.491058] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: VIRTUAL_X [ 4.491063] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 4.491074] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: VIRTUAL_X [ 4.491080] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 4.491090] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: VIRTUAL_X [ 4.491096] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 4.491106] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: VIRTUAL_X [ 4.491112] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.491122] [drm:drm_mode_prune_invalid] Not using 1280x1024 mode: VIRTUAL_Y [ 4.491128] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106470 1440 1520 1672 1904 900 901 907 934 0x40 0xa [ 4.491139] [drm:drm_mode_prune_invalid] Not using 1440x900 mode: VIRTUAL_X [ 4.491180] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] probed modes : [ 4.491191] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 4.491207] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.491220] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.491231] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 4.491242] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74250 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 4.491252] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74176 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 4.491263] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 25 74250 1280 3700 3740 3960 720 725 730 750 0x40 0x5 [ 4.491273] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59400 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 4.491284] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59341 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 4.491295] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 4.491305] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.491316] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 4.491326] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 4.491337] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.491347] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 4.491358] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 4.491368] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 4.491378] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 4.491389] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 4.491399] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0x5 [ 4.491410] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 4.491420] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 4.491431] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 4.491441] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 4.491451] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 4.491462] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 4.491472] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 4.491483] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.491493] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.491505] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] [ 4.492017] [drm:cdv_intel_dp_aux_ch] dp_aux_ch timeout status 0x51440064 [ 4.492026] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] disconnected [ 4.492034] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] [ 4.524201] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm HDMIC [ 4.524212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] disconnected [ 4.524223] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] [ 4.524433] [drm:cdv_intel_dp_detect] DPCD: Rev=10 LN_Rate=a LN_CNT=82 LN_DOWNSP=40 [ 4.525465] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 4.547188] systemd[1]: /usr/lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock \xe2\x86\x92 /run/cups/cups.sock; please update the unit file accordingly. [ 4.552139] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 4.553828] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 4.553837] [drm:drm_add_display_info] non_desktop set to 0 [ 4.553843] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 4.553855] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (1) [ 4.554877] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 4.581565] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 4.581576] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 4.581584] [drm:drm_add_display_info] non_desktop set to 0 [ 4.581590] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 4.581599] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 4.581609] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 4.581616] [drm:drm_add_display_info] non_desktop set to 0 [ 4.581622] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 4.581630] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (1) [ 4.581638] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 4.581644] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 4.581651] [drm:drm_add_display_info] non_desktop set to 0 [ 4.581656] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 4.581804] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] probed modes : [ 4.581812] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 56120 1024 1072 1104 1184 768 771 775 790 0x48 0x9 [ 4.581823] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 50 46760 1024 1072 1104 1184 768 771 775 790 0x40 0x9 [ 4.581834] [drm:drm_client_modeset_probe] connector 37 enabled? no [ 4.581842] [drm:drm_client_modeset_probe] connector 39 enabled? yes [ 4.581848] [drm:drm_client_modeset_probe] connector 41 enabled? yes [ 4.581854] [drm:drm_client_modeset_probe] connector 43 enabled? no [ 4.581860] [drm:drm_client_modeset_probe] connector 47 enabled? no [ 4.581866] [drm:drm_client_modeset_probe] connector 49 enabled? yes [ 4.581873] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 39 [ 4.581879] [drm:drm_client_modeset_probe] looking for preferred mode on connector 39 0 [ 4.581886] [drm:drm_client_modeset_probe] found mode 1024x768 [ 4.581891] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 41 [ 4.581897] [drm:drm_client_modeset_probe] looking for preferred mode on connector 41 0 [ 4.581903] [drm:drm_client_modeset_probe] found mode 1280x720 [ 4.581909] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 49 [ 4.581914] [drm:drm_client_modeset_probe] looking for preferred mode on connector 49 0 [ 4.581920] [drm:drm_client_modeset_probe] found mode 1024x768 [ 4.581925] [drm:drm_client_modeset_probe] picking CRTCs for 1280x768 config [ 4.581938] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (4) [ 4.581945] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (4) [ 4.581951] [drm:drm_client_modeset_probe] desired mode 1280x720 set on crtc 32 (0,0) [ 4.581959] [drm:drm_mode_object_get] OBJ ID: 41 (3) [ 4.581965] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 34 (0,0) [ 4.581972] [drm:drm_mode_object_get] OBJ ID: 49 (3) [ 4.581979] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 4.581985] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 4.581991] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (4) [ 4.581997] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 4.582003] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 4.582009] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (4) [ 4.582026] [drm:drm_crtc_helper_set_config] [ 4.582033] [drm:drm_crtc_helper_set_config] [CRTC:32:crtc-0] [FB:53] #connectors=1 (x y) (0 0) [ 4.582047] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 4.582055] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] to [CRTC:34:crtc-1] [ 4.582063] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 4.582070] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 4.582076] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 4.582082] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 4.582089] [drm:drm_crtc_helper_set_config] [ 4.582095] [drm:drm_crtc_helper_set_config] [CRTC:34:crtc-1] [FB:53] #connectors=1 (x y) (0 0) [ 4.582107] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 4.582115] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] to [CRTC:34:crtc-1] [ 4.582123] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 4.582129] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 4.582135] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 4.582141] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 4.654324] systemd[1]: Configuration file /usr/lib/systemd/system/cups-browsed.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 4.686796] systemd[1]: Queued start job for default target Multi-User System. [ 4.693886] systemd[1]: Created slice Slice /system/getty. [ 4.702416] systemd[1]: Created slice Slice /system/modprobe. [ 4.710793] systemd[1]: Created slice Slice /system/systemd-fsck. [ 4.718657] systemd[1]: Created slice User and Session Slice. [ 4.726185] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.733850] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.741995] systemd[1]: Reached target NFS client services. [ 4.749818] systemd[1]: Reached target Preparation for Remote File Systems. [ 4.757697] systemd[1]: Reached target Remote File Systems. [ 4.765699] systemd[1]: Reached target Slice Units. [ 4.773614] systemd[1]: Reached target Swaps. [ 4.781856] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.799054] systemd[1]: Listening on RPCbind Server Activation Socket. [ 4.807332] systemd[1]: Reached target RPC Port Mapper. [ 4.816206] systemd[1]: Listening on Journal Audit Socket. [ 4.824670] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.832928] systemd[1]: Listening on Journal Socket. [ 4.841316] systemd[1]: Listening on udev Control Socket. [ 4.849533] systemd[1]: Listening on udev Kernel Socket. [ 4.859478] systemd[1]: Mounting Huge Pages File System... [ 4.869434] systemd[1]: Mounting POSIX Message Queue File System... [ 4.878896] systemd[1]: Mounting NFSD configuration filesystem... [ 4.889570] systemd[1]: Mounting Kernel Debug File System... [ 4.899070] systemd[1]: Mounting Kernel Trace File System... [ 4.909210] systemd[1]: Mounting Temporary Directory /tmp... [ 4.918975] systemd[1]: Starting Availability of block devices... [ 4.928958] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. [ 4.936530] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/5.17.1/modules.devname). [ 4.946330] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 4.961965] systemd[1]: Starting Load Kernel Module configfs... [ 4.976324] systemd[1]: Starting Load Kernel Module drm... [ 4.987499] systemd[1]: Starting Load Kernel Module fuse... [ 4.999644] systemd[1]: Starting RPC Bind... [ 5.012199] systemd[1]: Starting File System Check on Root Device... [ 5.025260] systemd[1]: Starting Journal Service... [ 5.051476] systemd[1]: Starting Load Kernel Modules... [ 5.065338] systemd[1]: Starting Generate network units from Kernel command line... [ 5.079879] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.091521] systemd[1]: Starting Coldplug All udev Devices... [ 5.110989] systemd[1]: Started RPC Bind. [ 5.122218] systemd[1]: Mounted Huge Pages File System. [ 5.132884] systemd[1]: Mounted POSIX Message Queue File System. [ 5.143947] systemd[1]: Mounted NFSD configuration filesystem. [ 5.154979] systemd[1]: Mounted Kernel Debug File System. [ 5.166127] systemd[1]: Mounted Kernel Trace File System. [ 5.177046] systemd[1]: Mounted Temporary Directory /tmp. [ 5.188754] systemd[1]: Finished Availability of block devices. [ 5.200378] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 5.212865] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 5.218026] systemd[1]: Finished Load Kernel Module configfs. [ 5.226773] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 5.230986] systemd[1]: Finished Load Kernel Module drm. [ 5.239284] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 5.243287] systemd[1]: Finished Load Kernel Module fuse. [ 5.251259] systemd[1]: Finished File System Check on Root Device. [ 5.259297] systemd[1]: Finished Load Kernel Modules. [ 5.267222] systemd[1]: Finished Generate network units from Kernel command line. [ 5.280428] systemd[1]: FUSE Control File System was skipped because of a failed condition check (ConditionPathExists=/sys/fs/fuse/connections). [ 5.290987] systemd[1]: Kernel Configuration File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/config). [ 5.305264] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.320283] systemd[1]: Starting Apply Kernel Variables... [ 5.352980] EXT4-fs (sda3): re-mounted. Quota mode: none. [ 5.365661] systemd[1]: Finished Create Static Device Nodes in /dev. [ 5.378038] systemd[1]: Finished Remount Root and Kernel File Systems. [ 5.390432] systemd[1]: Finished Apply Kernel Variables. [ 5.402336] systemd[1]: Started Journal Service. [ 5.452300] systemd-journald[165]: Received client request to flush runtime journal. [ 5.457692] audit: type=1334 audit(1649620621.164:2): prog-id=6 op=LOAD [ 5.462569] audit: type=1334 audit(1649620621.169:3): prog-id=7 op=LOAD [ 5.467331] audit: type=1334 audit(1649620621.174:4): prog-id=8 op=LOAD [ 6.036513] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 6.071593] r8169 0000:03:00.0 enp3s0: renamed from eth1 [ 7.019379] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.870412] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none. [ 7.967270] audit: type=1334 audit(1649620623.674:5): prog-id=9 op=LOAD [ 7.979404] audit: type=1334 audit(1649620623.686:6): prog-id=10 op=LOAD [ 8.400514] audit: type=1325 audit(1649620624.107:7): table=mangle family=2 entries=0 op=xt_register pid=250 subj=kernel comm="iptables-restor" [ 8.408942] audit: type=1334 audit(1649620624.113:8): prog-id=11 op=LOAD [ 8.416835] audit: type=1334 audit(1649620624.113:9): prog-id=12 op=LOAD [ 8.416860] audit: type=1334 audit(1649620624.114:10): prog-id=13 op=LOAD [ 8.416877] audit: type=1300 audit(1649620624.107:7): arch=c000003e syscall=55 success=yes exit=0 a0=5 a1=0 a2=40 a3=7ffd284cc764 items=0 ppid=1 pid=250 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/sbin/xtables-legacy-multi" subj=kernel key=(null) [ 8.980214] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [ 9.055339] [drm:drm_crtc_helper_set_config] [ 9.055362] [drm:drm_crtc_helper_set_config] [CRTC:32:crtc-0] [FB:53] #connectors=1 (x y) (0 0) [ 9.055387] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 9.055398] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] to [CRTC:34:crtc-1] [ 9.055408] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 9.055418] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 9.055425] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 9.055433] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 9.055441] [drm:drm_crtc_helper_set_config] [ 9.055448] [drm:drm_crtc_helper_set_config] [CRTC:34:crtc-1] [FB:53] #connectors=1 (x y) (0 0) [ 9.055464] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 9.055474] [drm:drm_crtc_helper_set_config] [CONNECTOR:49:DP-2] to [CRTC:34:crtc-1] [ 9.055484] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 9.055491] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 9.055499] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 9.055507] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 9.077835] [drm:drm_stub_open] [ 9.077858] [drm:drm_open] comm="weston", pid=276, minor=0 [ 9.077896] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_GET_MAGIC [ 9.077920] gma500 0000:00:02.0: [drm:drm_getmagic] 1 [ 9.077936] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_AUTH_MAGIC [ 9.077951] gma500 0000:00:02.0: [drm:drm_authmagic] 1 [ 9.077985] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 9.078017] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 9.078349] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 9.078392] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 9.078411] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 9.078428] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_SET_CLIENT_CAP [ 9.078448] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 9.078466] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_SET_CLIENT_CAP [ 9.078481] [drm:drm_ioctl] comm="weston", pid=276, ret=-95 [ 9.078578] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 9.078650] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_SET_CLIENT_CAP [ 9.078667] [drm:drm_ioctl] comm="weston", pid=276, ret=-22 [ 9.078683] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_SET_CLIENT_CAP [ 9.078803] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 9.078837] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 9.078869] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.078893] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.078918] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.078939] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.078965] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES [ 9.078986] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES [ 9.079005] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE [ 9.079026] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE [ 9.079075] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.079101] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.079127] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.079185] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.079228] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE [ 9.079251] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE [ 9.079277] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.079299] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.079323] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.079343] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.264805] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 9.265111] r8169 0000:02:00.0 enp2s0: Link is Down [ 9.433092] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 9.433126] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] [ 9.445222] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] disconnected [ 9.445260] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 9.445299] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 9.445326] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 9.445378] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.445400] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 9.445418] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.445437] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 9.445462] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.445484] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.445510] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.445532] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.445560] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.445582] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.445609] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.445631] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.445655] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.445674] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.446084] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 9.446114] [drm:drm_ioctl] comm="weston", pid=276, ret=-2 [ 9.446289] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 9.446322] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] [ 9.451186] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 9.451297] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] probed modes : [ 9.451313] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 9.451333] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 9.451370] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 9.451392] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 9.451436] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.451454] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 9.451468] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.451484] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 9.451504] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451522] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451543] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451561] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451585] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451604] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451625] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451642] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451662] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451678] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451696] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451714] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451736] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.451752] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.452102] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 9.452122] [drm:drm_ioctl] comm="weston", pid=276, ret=-2 [ 9.452266] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 9.452288] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] [ 9.518102] r8169 0000:03:00.0 enp3s0: Link is Down [ 9.774376] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 9.774402] [drm:drm_add_display_info] non_desktop set to 0 [ 9.774411] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 9.774420] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 9.774429] [drm:drm_add_display_info] CEA VCDB 0x7f [ 9.872541] ip (368) used greatest stack depth: 12648 bytes left [ 9.898233] [drm:drm_mode_object_put.part.0] OBJ ID: 54 (1) [ 10.251722] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 10.251747] [drm:drm_add_display_info] non_desktop set to 0 [ 10.251757] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 10.251766] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 10.251774] [drm:drm_add_display_info] CEA VCDB 0x7f [ 10.347211] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (1) [ 10.347251] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 10.347265] [drm:drm_add_display_info] non_desktop set to 0 [ 10.347275] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 10.347285] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 10.347295] [drm:drm_add_display_info] CEA VCDB 0x7f [ 10.347310] [drm:drm_mode_object_put.part.0] OBJ ID: 54 (1) [ 10.347327] [drm:drm_add_edid_modes] ELD monitor Toshiba-H2C [ 10.347339] [drm:drm_add_edid_modes] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 10.347353] [drm:drm_add_edid_modes] ELD size 32, SAD count 0 [ 10.347364] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 10.347374] [drm:drm_add_display_info] non_desktop set to 0 [ 10.347383] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 10.347393] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 10.347401] [drm:drm_add_display_info] CEA VCDB 0x7f [ 10.349197] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] probed modes : [ 10.349225] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 10.349244] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 10.349261] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 10.349277] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 10.349294] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 10.349311] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 10.349329] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 10.349346] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 10.349363] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106470 1440 1520 1672 1904 900 901 907 934 0x40 0xa [ 10.349381] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 10.349398] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 10.349415] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 10.349433] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74250 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 10.349450] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74176 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 10.349466] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 25 74250 1280 3700 3740 3960 720 725 730 750 0x40 0x5 [ 10.349482] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59400 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 10.349498] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59341 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 10.349515] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 10.349531] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 10.349547] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 10.349563] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 10.349579] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 10.349596] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 10.349614] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 10.349631] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 10.349649] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 10.349667] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 10.349684] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0x5 [ 10.349701] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 10.349719] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 10.349737] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 10.349755] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 10.349771] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 10.349788] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 10.349803] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 10.349819] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 10.349836] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 10.353225] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (4) [ 10.353279] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 10.353327] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (4) [ 10.353375] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 10.353396] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (4) [ 10.353414] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 10.353432] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (4) [ 10.353457] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353478] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353503] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353525] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353553] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353575] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353601] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353622] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353646] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353665] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353687] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353707] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.353734] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 10.353751] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (2) [ 10.353767] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 10.353783] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (2) [ 10.354138] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 10.354225] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC [ 10.354366] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 10.354391] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] [ 10.354912] [drm:cdv_intel_dp_aux_ch] dp_aux_ch timeout status 0x51440064 [ 10.354931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] disconnected [ 10.354948] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 10.354975] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 10.354996] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 10.355035] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 10.355054] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 10.355068] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 10.355083] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 10.355103] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355120] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355140] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355196] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355222] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355240] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355263] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355281] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355301] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355317] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355336] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355355] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355376] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355393] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.355690] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 10.355711] [drm:drm_ioctl] comm="weston", pid=276, ret=-2 [ 10.355783] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 10.355803] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] [ 10.418205] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm HDMIC [ 10.418229] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] disconnected [ 10.422225] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 10.422273] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 10.422301] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 10.422343] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 10.422362] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 10.422377] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 10.422394] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 10.422415] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422434] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422456] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422476] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422502] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422521] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422545] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422563] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422585] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422603] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422623] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422643] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.422994] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 10.423025] [drm:drm_ioctl] comm="weston", pid=276, ret=-2 [ 10.423207] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 10.423235] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] [ 10.423455] [drm:cdv_intel_dp_detect] DPCD: Rev=10 LN_Rate=a LN_CNT=82 LN_DOWNSP=40 [ 10.424494] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 10.451431] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 10.451463] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 10.451475] [drm:drm_add_display_info] non_desktop set to 0 [ 10.451484] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 10.513727] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 10.514795] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 10.541617] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 10.541646] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 10.541661] [drm:drm_add_display_info] non_desktop set to 0 [ 10.541672] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 10.568931] [drm:drm_mode_object_put.part.0] OBJ ID: 54 (1) [ 10.568968] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 10.568982] [drm:drm_add_display_info] non_desktop set to 0 [ 10.568993] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 10.569010] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 10.569026] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 10.569036] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 10.569045] [drm:drm_add_display_info] non_desktop set to 0 [ 10.569054] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 10.569290] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] probed modes : [ 10.569312] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 56120 1024 1072 1104 1184 768 771 775 790 0x48 0x9 [ 10.569332] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 50 46760 1024 1072 1104 1184 768 771 775 790 0x40 0x9 [ 10.569377] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (4) [ 10.569413] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 10.569437] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (4) [ 10.569478] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 10.569499] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (4) [ 10.569516] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 10.570973] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (4) [ 10.571289] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571322] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571349] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571370] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571396] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571419] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571444] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571466] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571679] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571706] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571729] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571752] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571778] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571800] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 10.571826] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 10.571842] [drm:drm_mode_object_put.part.0] OBJ ID: 54 (2) [ 10.571860] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 10.571876] [drm:drm_mode_object_put.part.0] OBJ ID: 54 (2) [ 10.572630] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 10.572675] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC [ 10.576674] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 10.576727] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC [ 10.576754] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_CREATE_DUMB [ 10.578690] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_ADDFB2 [ 10.578729] [drm:drm_mode_addfb2] [FB:51] [ 10.578743] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_MAP_DUMB [ 10.578797] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_CREATE_DUMB [ 10.578830] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_ADDFB2 [ 10.578849] [drm:drm_mode_addfb2] [FB:55] [ 10.578860] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_MAP_DUMB [ 10.657545] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETCRTC [ 10.657580] [drm:drm_mode_setcrtc] [CRTC:34:crtc-1] [ 10.657594] [drm:drm_crtc_helper_set_config] [ 10.657603] [drm:drm_crtc_helper_set_config] [CRTC:34:crtc-1] [NOFB] [ 10.657617] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (4) [ 10.657649] [drm:cdv_intel_dp_link_down.isra.0] [ 10.832187] [drm:drm_mode_object_get] OBJ ID: 53 (3) [ 10.832212] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (4) [ 10.832222] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (3) [ 10.832263] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETCRTC [ 10.832284] [drm:drm_mode_setcrtc] [CRTC:32:crtc-0] [ 10.832305] [drm:drm_mode_setcrtc] [CONNECTOR:41:DVI-D-1] [ 10.832315] [drm:drm_crtc_helper_set_config] [ 10.832325] [drm:drm_crtc_helper_set_config] [CRTC:32:crtc-0] [FB:55] #connectors=1 (x y) (0 0) [ 10.832348] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:32:crtc-0] [ 10.832368] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 10.832378] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (2) [ 10.832387] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 10.832397] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (4) [ 10.832447] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 10.832481] gma500 0000:00:02.0: [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [ 10.832504] [drm:drm_mode_object_get] OBJ ID: 55 (3) [ 10.832514] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (4) [ 10.832524] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 10.832540] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETPROPERTY [ 10.832559] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (4) [ 11.836857] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 11.836895] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 142337 to client [ 11.887742] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 11.887787] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 11.887799] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 11.887808] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 11.922241] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 11.922286] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 11.922298] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 11.922307] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 11.974844] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 11.974893] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 11.974905] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 11.974915] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 12.023828] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.023872] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 12.023884] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 12.023893] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 12.074269] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.074315] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 12.074327] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 12.074336] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 12.130334] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.130380] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 12.130392] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 12.130402] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 12.173926] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.173975] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 12.173986] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 12.173995] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 12.241143] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.241214] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 12.241226] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 12.241235] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 12.291739] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.291785] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 12.291797] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 12.291806] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 12.341216] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.341260] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 12.341271] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 12.341280] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 12.391181] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.391225] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 12.391237] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 12.391245] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 12.440744] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.440790] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 12.440802] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 12.440810] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 12.490643] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.490688] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 12.490700] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 12.490708] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 12.540619] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.540665] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 12.540678] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 12.540688] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 12.590619] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.590666] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 12.590678] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 12.590687] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 12.631644] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.631692] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 12.631703] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 12.631712] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 12.681975] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.682027] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 12.682042] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 12.682052] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 12.727411] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.727459] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 12.727472] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 12.727481] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 12.755712] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.755758] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 12.755769] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 12.755779] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 12.788844] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.788890] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 12.788902] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 12.788912] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 12.819312] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 12.819357] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 12.819369] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 12.819378] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 13.046231] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off [ 13.046273] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 14.222357] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 14.222392] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 179201 to client [ 14.549486] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 14.549534] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 14.549549] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 14.549560] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 18.621609] NFSD: Using nfsdcld client tracking operations. [ 18.621630] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000098) [ 19.329188] ip (512) used greatest stack depth: 12264 bytes left [ 19.449915] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 19.449954] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 259329 to client [ 19.566206] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 19.566263] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 19.566276] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 19.566285] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 21.060825] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 21.060867] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 284161 to client [ 21.147858] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 21.147903] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 21.147915] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 21.147924] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 21.670223] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 21.670259] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 293633 to client [ 21.765326] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 21.765373] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 21.765386] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 21.765394] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 21.991433] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 21.991470] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 298497 to client [ 22.067767] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 22.067812] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 22.067823] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 22.067832] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 22.228640] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 22.228682] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 302081 to client [ 22.322925] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 22.322970] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 22.322982] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 22.322990] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 27.396174] gma500 0000:00:02.0: [drm:vblank_disable_fn] disabling vblank on crtc 0 [ 33.534444] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 33.534487] gma500 0000:00:02.0: [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 [ 33.534507] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 475649 to client [ 33.534550] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 33.534583] [drm:drm_mode_object_get] OBJ ID: 51 (3) [ 33.534595] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (4) [ 33.534603] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 33.650302] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 33.650350] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 33.650362] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 33.650371] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 33.766683] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 33.766719] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 479233 to client [ 33.875469] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 33.875515] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 33.875527] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 33.875536] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 34.006240] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 34.006277] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 483073 to client [ 34.089118] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 34.089196] [drm:drm_mode_object_get] OBJ ID: 55 (2) [ 34.089209] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (3) [ 34.089217] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 36.058321] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_WAIT_VBLANK [ 36.058358] gma500 0000:00:02.0: [drm:drm_wait_vblank_ioctl] crtc 0 returning 514561 to client [ 36.146317] [drm:drm_ioctl] comm="weston" pid=276, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 36.146360] [drm:drm_mode_object_get] OBJ ID: 51 (2) [ 36.146372] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (3) [ 36.146381] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2)
What machine is this? I've seen very few gma500 devices with UEFI.
Yeah, it's probably not the most common board: https://www.jetwayipc.com/product/nf9b-2550/
-Patrik
Changes v2 -> v3:
- select EFI_FB instead of depending on it
Changes v1 -> v2:
- use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FB select DRM_KMS_HELPER # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915 select ACPI_VIDEO if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPIselect FB_EFI if EFI help Say yes for an experimental 2D KMS framebuffer driver for the Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and-- 2.25.1
On Sun, Apr 10, 2022 at 10:05 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:52 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 9:40 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:36 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sat, Apr 9, 2022 at 6:23 AM James Hilliard james.hilliard1@gmail.com wrote:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Hi James, EFI_FB is its own driver and not needed by gma500 to drive its hardware. What makes you think it's required?
I wasn't getting any HDMI video output without it enabled for some reason, I assume it is doing some sort of initialization needed by gma500 during startup.
Then it sounds like you might just be using EFI_FB and not gma500. Can you provide the kernel log with drm.debug=0x1f set on kernel command-line.
Seems efifb loads first and then hands off to gma500
That is how it normally works but efifb shouldn't change the state of the currently set mode so shouldn't affect gma500.
From the logs I can see that you have LVDS (internal panel), HDMI and
DP (3 displays in total) connected. This sounds wrong. Your version of gma500 (Cedarview) doesn't support more than 2 crtcs/pipes. This might be a problem.
On Mon, Apr 11, 2022 at 3:27 AM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 10:05 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:52 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 9:40 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:36 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sat, Apr 9, 2022 at 6:23 AM James Hilliard james.hilliard1@gmail.com wrote:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Hi James, EFI_FB is its own driver and not needed by gma500 to drive its hardware. What makes you think it's required?
I wasn't getting any HDMI video output without it enabled for some reason, I assume it is doing some sort of initialization needed by gma500 during startup.
Then it sounds like you might just be using EFI_FB and not gma500. Can you provide the kernel log with drm.debug=0x1f set on kernel command-line.
Seems efifb loads first and then hands off to gma500
That is how it normally works but efifb shouldn't change the state of the currently set mode so shouldn't affect gma500. From the logs I can see that you have LVDS (internal panel), HDMI and DP (3 displays in total) connected. This sounds wrong. Your version of gma500 (Cedarview) doesn't support more than 2 crtcs/pipes. This might be a problem.
Yeah, there's a bug there with the connector status, only DVI-D-1 is actually connected, I have DP-2 and LVDS-1 turned off in weston.
On Tue, Apr 12, 2022 at 3:48 AM James Hilliard james.hilliard1@gmail.com wrote:
On Mon, Apr 11, 2022 at 3:27 AM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 10:05 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:52 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 9:40 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:36 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sat, Apr 9, 2022 at 6:23 AM James Hilliard james.hilliard1@gmail.com wrote: > > Select the efi framebuffer if efi is enabled. > > This appears to be needed for video output to function correctly. > > Signed-off-by: James Hilliard james.hilliard1@gmail.com
Hi James, EFI_FB is its own driver and not needed by gma500 to drive its hardware. What makes you think it's required?
I wasn't getting any HDMI video output without it enabled for some reason, I assume it is doing some sort of initialization needed by gma500 during startup.
Then it sounds like you might just be using EFI_FB and not gma500. Can you provide the kernel log with drm.debug=0x1f set on kernel command-line.
Seems efifb loads first and then hands off to gma500
That is how it normally works but efifb shouldn't change the state of the currently set mode so shouldn't affect gma500. From the logs I can see that you have LVDS (internal panel), HDMI and DP (3 displays in total) connected. This sounds wrong. Your version of gma500 (Cedarview) doesn't support more than 2 crtcs/pipes. This might be a problem.
Yeah, there's a bug there with the connector status, only DVI-D-1 is actually connected, I have DP-2 and LVDS-1 turned off in weston.
Ok, but are the connectors physically connected to anything? Regardless of what you do in Weston, the connectors shouldn't be getting modes if they aren't used. LVDS might be from VBIOS but I'm not sure where the DP modes come from. It would help if you also provide kernel logs with drm.debug=0x1f when the outputs doesn't work so I have something to compare with.
On Tue, Apr 12, 2022 at 3:30 AM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Tue, Apr 12, 2022 at 3:48 AM James Hilliard james.hilliard1@gmail.com wrote:
On Mon, Apr 11, 2022 at 3:27 AM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 10:05 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:52 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 9:40 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:36 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote: > > On Sat, Apr 9, 2022 at 6:23 AM James Hilliard james.hilliard1@gmail.com wrote: > > > > Select the efi framebuffer if efi is enabled. > > > > This appears to be needed for video output to function correctly. > > > > Signed-off-by: James Hilliard james.hilliard1@gmail.com > > Hi James, > EFI_FB is its own driver and not needed by gma500 to drive its > hardware. What makes you think it's required?
I wasn't getting any HDMI video output without it enabled for some reason, I assume it is doing some sort of initialization needed by gma500 during startup.
Then it sounds like you might just be using EFI_FB and not gma500. Can you provide the kernel log with drm.debug=0x1f set on kernel command-line.
Seems efifb loads first and then hands off to gma500
That is how it normally works but efifb shouldn't change the state of the currently set mode so shouldn't affect gma500. From the logs I can see that you have LVDS (internal panel), HDMI and DP (3 displays in total) connected. This sounds wrong. Your version of gma500 (Cedarview) doesn't support more than 2 crtcs/pipes. This might be a problem.
Yeah, there's a bug there with the connector status, only DVI-D-1 is actually connected, I have DP-2 and LVDS-1 turned off in weston.
Ok, but are the connectors physically connected to anything?
There is one HDMI cable physically connected to the board
Regardless of what you do in Weston, the connectors shouldn't be getting modes if they aren't used.
Yeah, it seems there's a bug there, not sure if that's related to the output failure when efifb isn't available.
LVDS might be from VBIOS but I'm not sure where the DP modes come from. It would help if you also provide kernel logs with drm.debug=0x1f when the outputs doesn't work so I have something to compare with.
Log with efifb/fb not enabled in kernel build which causes no HDMI output:
[ 0.000000] Linux version 5.17.3 (buildroot@james-x399) (x86_64-buildroot-linux-gnu-gcc.br_real (Buildroot 2022.02-533-g95bc9df0b3) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Tue Apr 19 15:14:53 MDT 2022 [ 0.000000] Command line: root=PARTUUID=dea0d091-16af-704f-977c-1a5475cf261c rootwait drm.debug=0x1f console=tty1 [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] signal: max sigframe size: 1440 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf32cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf32d000-0x00000000cf374fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf375000-0x00000000cf385fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf386000-0x00000000cf38dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cf38e000-0x00000000cf3b5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf3b6000-0x00000000cf3b6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf3b7000-0x00000000cf3c6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf3c7000-0x00000000cf3d2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf3d3000-0x00000000cf3f7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf3f8000-0x00000000cf43afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf43b000-0x00000000cf5bafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf5bb000-0x00000000cf6e6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf6e7000-0x00000000cf6effff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf6f0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x021da018-0x021ea057] usable ==> usable [ 0.000000] e820: update [mem 0x021da018-0x021ea057] usable ==> usable [ 0.000000] e820: update [mem 0x020d9018-0x020e5857] usable ==> usable [ 0.000000] e820: update [mem 0x020d9018-0x020e5857] usable ==> usable [ 0.000000] e820: update [mem 0x02237018-0x02243857] usable ==> usable [ 0.000000] e820: update [mem 0x02237018-0x02243857] usable ==> usable [ 0.000000] e820: update [mem 0x02215018-0x0221d057] usable ==> usable [ 0.000000] e820: update [mem 0x02215018-0x0221d057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000020d9017] usable [ 0.000000] reserve setup_data: [mem 0x00000000020d9018-0x00000000020e5857] usable [ 0.000000] reserve setup_data: [mem 0x00000000020e5858-0x00000000021da017] usable [ 0.000000] reserve setup_data: [mem 0x00000000021da018-0x00000000021ea057] usable [ 0.000000] reserve setup_data: [mem 0x00000000021ea058-0x0000000002215017] usable [ 0.000000] reserve setup_data: [mem 0x0000000002215018-0x000000000221d057] usable [ 0.000000] reserve setup_data: [mem 0x000000000221d058-0x0000000002237017] usable [ 0.000000] reserve setup_data: [mem 0x0000000002237018-0x0000000002243857] usable [ 0.000000] reserve setup_data: [mem 0x0000000002243858-0x00000000cf32cfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cf32d000-0x00000000cf374fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cf375000-0x00000000cf385fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf386000-0x00000000cf38dfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000cf38e000-0x00000000cf3b5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf3b6000-0x00000000cf3b6fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cf3b7000-0x00000000cf3c6fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf3c7000-0x00000000cf3d2fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cf3d3000-0x00000000cf3f7fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf3f8000-0x00000000cf43afff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000cf43b000-0x00000000cf5bafff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cf5bb000-0x00000000cf6e6fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf6e7000-0x00000000cf6effff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cf6f0000-0x00000000cfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] efi: EFI v2.00 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xcf386000 SMBIOS=0xf0480 ACPI=0xcf386000 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: /, BIOS 4.6.4 11/19/2012 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1862.242 MHz processor [ 0.001842] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001852] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001878] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.001927] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002220] last_pfn = 0xcf6f0 max_arch_pfn = 0x400000000 [ 0.007860] found SMP MP-table at [mem 0x000fce60-0x000fce6f] [ 0.011551] Secure boot disabled [ 0.011559] ACPI: Early table checksum verification disabled [ 0.011570] ACPI: RSDP 0x00000000CF386000 000024 (v02 _ ) [ 0.011582] ACPI: XSDT 0x00000000CF386068 00004C (v01 _ _ 01072009 AMI 00010013) [ 0.011598] ACPI: FACP 0x00000000CF38D538 0000F4 (v04 _ _ 01072009 AMI 00010013) [ 0.011614] ACPI: DSDT 0x00000000CF386140 0073F2 (v02 _ _ 00000A03 INTL 20051117) [ 0.011627] ACPI: FACS 0x00000000CF3D0F80 000040 [ 0.011636] ACPI: APIC 0x00000000CF38D630 000072 (v03 _ _ 01072009 AMI 00010013) [ 0.011648] ACPI: MCFG 0x00000000CF38D6A8 00003C (v01 _ _ 01072009 MSFT 00000097) [ 0.011660] ACPI: HPET 0x00000000CF38D6E8 000038 (v01 _ _ 01072009 AMI. 00000004) [ 0.011672] ACPI: SSDT 0x00000000CF38D720 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.011682] ACPI: Reserving FACP table memory at [mem 0xcf38d538-0xcf38d62b] [ 0.011689] ACPI: Reserving DSDT table memory at [mem 0xcf386140-0xcf38d531] [ 0.011695] ACPI: Reserving FACS table memory at [mem 0xcf3d0f80-0xcf3d0fbf] [ 0.011700] ACPI: Reserving APIC table memory at [mem 0xcf38d630-0xcf38d6a1] [ 0.011706] ACPI: Reserving MCFG table memory at [mem 0xcf38d6a8-0xcf38d6e3] [ 0.011711] ACPI: Reserving HPET table memory at [mem 0xcf38d6e8-0xcf38d71f] [ 0.011717] ACPI: Reserving SSDT table memory at [mem 0xcf38d720-0xcf38dd74] [ 0.011972] No NUMA configuration found [ 0.011977] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.011990] NODE_DATA(0) allocated [mem 0x12fff8000-0x12fffbfff] [ 0.012063] Zone ranges: [ 0.012067] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.012074] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.012080] Normal [mem 0x0000000100000000-0x000000012fffffff] [ 0.012086] Movable zone start for each node [ 0.012090] Early memory node ranges [ 0.012092] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.012098] node 0: [mem 0x0000000000100000-0x00000000cf32cfff] [ 0.012104] node 0: [mem 0x00000000cf43b000-0x00000000cf5bafff] [ 0.012108] node 0: [mem 0x00000000cf6e7000-0x00000000cf6effff] [ 0.012113] node 0: [mem 0x0000000100000000-0x000000012fffffff] [ 0.012119] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff] [ 0.012131] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.012209] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.048130] On node 0, zone DMA32: 270 pages in unavailable ranges [ 0.048152] On node 0, zone DMA32: 300 pages in unavailable ranges [ 0.056654] On node 0, zone Normal: 2320 pages in unavailable ranges [ 0.057060] ACPI: PM-Timer IO Port: 0x408 [ 0.057079] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.057102] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.057111] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.057117] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.057128] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.057132] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.057146] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.057252] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.057262] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.057272] PM: hibernation: Registered nosave memory: [mem 0x020d9000-0x020d9fff] [ 0.057281] PM: hibernation: Registered nosave memory: [mem 0x020e5000-0x020e5fff] [ 0.057290] PM: hibernation: Registered nosave memory: [mem 0x021da000-0x021dafff] [ 0.057299] PM: hibernation: Registered nosave memory: [mem 0x021ea000-0x021eafff] [ 0.057308] PM: hibernation: Registered nosave memory: [mem 0x02215000-0x02215fff] [ 0.057317] PM: hibernation: Registered nosave memory: [mem 0x0221d000-0x0221dfff] [ 0.057326] PM: hibernation: Registered nosave memory: [mem 0x02237000-0x02237fff] [ 0.057336] PM: hibernation: Registered nosave memory: [mem 0x02243000-0x02243fff] [ 0.057345] PM: hibernation: Registered nosave memory: [mem 0xcf32d000-0xcf374fff] [ 0.057350] PM: hibernation: Registered nosave memory: [mem 0xcf375000-0xcf385fff] [ 0.057354] PM: hibernation: Registered nosave memory: [mem 0xcf386000-0xcf38dfff] [ 0.057358] PM: hibernation: Registered nosave memory: [mem 0xcf38e000-0xcf3b5fff] [ 0.057363] PM: hibernation: Registered nosave memory: [mem 0xcf3b6000-0xcf3b6fff] [ 0.057367] PM: hibernation: Registered nosave memory: [mem 0xcf3b7000-0xcf3c6fff] [ 0.057371] PM: hibernation: Registered nosave memory: [mem 0xcf3c7000-0xcf3d2fff] [ 0.057375] PM: hibernation: Registered nosave memory: [mem 0xcf3d3000-0xcf3f7fff] [ 0.057379] PM: hibernation: Registered nosave memory: [mem 0xcf3f8000-0xcf43afff] [ 0.057389] PM: hibernation: Registered nosave memory: [mem 0xcf5bb000-0xcf6e6fff] [ 0.057399] PM: hibernation: Registered nosave memory: [mem 0xcf6f0000-0xcfffffff] [ 0.057403] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xdfffffff] [ 0.057407] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.057412] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.057416] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.057420] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.057424] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.057428] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed13fff] [ 0.057433] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed19fff] [ 0.057437] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.057441] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] [ 0.057445] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedfffff] [ 0.057449] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.057453] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.057458] PM: hibernation: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.057464] [mem 0xd0000000-0xdfffffff] available for PCI devices [ 0.057477] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.074900] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.078358] percpu: Embedded 53 pages/cpu s179544 r8192 d29352 u524288 [ 0.078395] pcpu-alloc: s179544 r8192 d29352 u524288 alloc=1*2097152 [ 0.078403] pcpu-alloc: [0] 0 1 2 3 [ 0.078498] Fallback order for Node 0: 0 [ 0.078510] Built 1 zonelists, mobility grouping on. Total pages: 1029091 [ 0.078515] Policy zone: Normal [ 0.078520] Kernel command line: root=PARTUUID=dea0d091-16af-704f-977c-1a5475cf261c rootwait drm.debug=0x1f console=tty1 [ 0.082440] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.084381] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.084480] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.284517] Memory: 3984680K/4182356K available (18445K kernel code, 2855K rwdata, 5568K rodata, 1276K init, 656K bss, 197416K reserved, 0K cma-reserved) [ 0.284673] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.286322] Dynamic Preempt: voluntary [ 0.286429] rcu: Preemptible hierarchical RCU implementation. [ 0.286435] rcu: RCU event tracing is enabled. [ 0.286438] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.286443] Trampoline variant of Tasks RCU enabled. [ 0.286446] Tracing variant of Tasks RCU enabled. [ 0.286450] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.286454] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.290849] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.291329] random: get_random_bytes called from start_kernel+0x49c/0x66b with crng_init=0 [ 0.291421] Console: colour dummy device 80x25 [ 0.292426] printk: console [tty1] enabled [ 0.292487] ACPI: Core revision 20211217 [ 0.292702] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.292743] APIC: Switch to symmetric I/O mode setup [ 0.293353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.297744] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x35afae52766, max_idle_ns: 881590503306 ns [ 0.297771] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.48 BogoMIPS (lpj=1862242) [ 0.297788] pid_max: default: 32768 minimum: 301 [ 0.308142] LSM: Security Framework initializing [ 0.308182] SELinux: Initializing. [ 0.308300] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.308345] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.308826] Disabled fast string operations [ 0.308860] CPU0: Thermal monitoring enabled (TM1) [ 0.308888] process: using mwait in idle threads [ 0.308900] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 [ 0.308909] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 [ 0.326596] Freeing SMP alternatives memory: 48K [ 0.429523] smpboot: CPU0: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz (family: 0x6, model: 0x36, stepping: 0x1) [ 0.429762] cblist_init_generic: Setting adjustable number of callback queues. [ 0.429762] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.429762] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.429762] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver. [ 0.429762] ... version: 3 [ 0.429762] ... bit width: 40 [ 0.429762] ... generic registers: 2 [ 0.429762] ... value mask: 000000ffffffffff [ 0.429762] ... max period: 000000007fffffff [ 0.429762] ... fixed-purpose events: 3 [ 0.429762] ... event mask: 0000000700000003 [ 0.429762] rcu: Hierarchical SRCU implementation. [ 0.430521] smp: Bringing up secondary CPUs ... [ 0.430900] x86: Booting SMP configuration: [ 0.430915] .... node #0, CPUs: #1 [ 0.002497] Disabled fast string operations [ 0.431762] TSC synchronization [CPU#0 -> CPU#1]: [ 0.431762] Measured 3332 cycles TSC warp between CPUs, turning off TSC clock. [ 0.431762] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.432120] #2 [ 0.002497] Disabled fast string operations [ 0.433096] #3 [ 0.002497] Disabled fast string operations [ 0.433244] smp: Brought up 1 node, 4 CPUs [ 0.433244] smpboot: Max logical packages: 1 [ 0.433244] smpboot: Total of 4 processors activated (14897.93 BogoMIPS) [ 0.434772] devtmpfs: initialized [ 0.435178] ACPI: PM: Registering ACPI NVS region [mem 0xcf32d000-0xcf374fff] (294912 bytes) [ 0.435178] ACPI: PM: Registering ACPI NVS region [mem 0xcf3b6000-0xcf3b6fff] (4096 bytes) [ 0.435178] ACPI: PM: Registering ACPI NVS region [mem 0xcf3c7000-0xcf3d2fff] (49152 bytes) [ 0.435178] ACPI: PM: Registering ACPI NVS region [mem 0xcf3f8000-0xcf43afff] (274432 bytes) [ 0.435178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.435178] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.435783] PM: RTC time: 23:34:15, date: 2022-04-19 [ 0.436035] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.436343] audit: initializing netlink subsys (disabled) [ 0.436386] audit: type=2000 audit(1650411255.143:1): state=initialized audit_enabled=0 res=1 [ 0.436826] thermal_sys: Registered thermal governor 'step_wise' [ 0.436832] thermal_sys: Registered thermal governor 'user_space' [ 0.436902] cpuidle: using governor menu [ 0.436983] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.437009] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.437033] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 0.437817] PCI: Using configuration type 1 for base access [ 0.446870] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.446905] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.447800] ACPI: Added _OSI(Module Device) [ 0.447816] ACPI: Added _OSI(Processor Device) [ 0.447824] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.447832] ACPI: Added _OSI(Processor Aggregator Device) [ 0.447841] ACPI: Added _OSI(Linux-Dell-Video) [ 0.447849] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.447858] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.457460] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.459788] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.461088] ACPI: Dynamic OEM Table Load: [ 0.461121] ACPI: SSDT 0xFFFF8A81002C9800 0006D5 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.463205] ACPI: Dynamic OEM Table Load: [ 0.463229] ACPI: SSDT 0xFFFF8A81009B80C0 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.466652] ACPI: Interpreter enabled [ 0.466711] ACPI: PM: (supports S0 S1 S4 S5) [ 0.466722] ACPI: Using IOAPIC for interrupt routing [ 0.466818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.467619] ACPI: Enabled 12 GPEs in block 00 to 1F [ 0.489742] ACPI: PM: Power Resource [FN00] [ 0.491691] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.491720] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.491856] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.491870] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.491881] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR) [ 0.492334] PCI host bridge to bus 0000:00 [ 0.492348] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.492361] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.492372] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] [ 0.492385] pci_bus 0000:00: root bus resource [mem 0xcf800000-0xfebfffff window] [ 0.492398] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.492435] pci 0000:00:00.0: [8086:0bf3] type 00 class 0x060000 [ 0.492680] pci 0000:00:02.0: [8086:0be2] type 00 class 0x030000 [ 0.492703] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff] [ 0.492719] pci 0000:00:02.0: reg 0x14: [io 0xf100-0xf107] [ 0.492777] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.493055] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.493097] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit] [ 0.493250] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.493496] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.493679] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.493945] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.494128] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.494378] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.494560] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.494816] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.494998] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.495243] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.495328] pci 0000:00:1d.0: reg 0x20: [io 0xf0a0-0xf0bf] [ 0.495564] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.495649] pci 0000:00:1d.1: reg 0x20: [io 0xf080-0xf09f] [ 0.495900] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.495985] pci 0000:00:1d.2: reg 0x20: [io 0xf060-0xf07f] [ 0.496238] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.496323] pci 0000:00:1d.3: reg 0x20: [io 0xf040-0xf05f] [ 0.496582] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.496620] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff] [ 0.496772] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.496993] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.497314] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 [ 0.497666] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 [ 0.497704] pci 0000:00:1f.2: reg 0x10: [io 0xf0f0-0xf0f7] [ 0.497728] pci 0000:00:1f.2: reg 0x14: [io 0xf0e0-0xf0e3] [ 0.497750] pci 0000:00:1f.2: reg 0x18: [io 0xf0d0-0xf0d7] [ 0.497781] pci 0000:00:1f.2: reg 0x1c: [io 0xf0c0-0xf0c3] [ 0.497805] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf02f] [ 0.497828] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff] [ 0.497911] pci 0000:00:1f.2: PME# supported from D3hot [ 0.498116] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.498184] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.498477] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.498624] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.498669] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.498723] pci 0000:02:00.0: reg 0x18: [mem 0xdfe04000-0xdfe04fff 64bit pref] [ 0.498776] pci 0000:02:00.0: reg 0x20: [mem 0xdfe00000-0xdfe03fff 64bit pref] [ 0.498966] pci 0000:02:00.0: supports D1 D2 [ 0.498976] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.499283] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.499300] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.499314] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.499453] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.499498] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.499552] pci 0000:03:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref] [ 0.499591] pci 0000:03:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref] [ 0.499786] pci 0000:03:00.0: supports D1 D2 [ 0.499797] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.500102] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.500119] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.500133] pci 0000:00:1c.2: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.500273] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601 [ 0.500321] pci 0000:04:00.0: reg 0x10: [io 0xc050-0xc057] [ 0.500350] pci 0000:04:00.0: reg 0x14: [io 0xc040-0xc043] [ 0.500378] pci 0000:04:00.0: reg 0x18: [io 0xc030-0xc037] [ 0.500406] pci 0000:04:00.0: reg 0x1c: [io 0xc020-0xc023] [ 0.500434] pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc01f] [ 0.500462] pci 0000:04:00.0: reg 0x24: [mem 0xdfc00000-0xdfc001ff] [ 0.500659] pci 0000:04:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:1c.3 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 0.500884] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.500901] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.500915] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.500966] pci_bus 0000:05: extended config space not accessible [ 0.501070] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.501098] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.501111] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.501124] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000fffff window] (subtractive decode) [ 0.501137] pci 0000:00:1e.0: bridge window [mem 0xcf800000-0xfebfffff window] (subtractive decode) [ 0.503712] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.503894] ACPI: PCI: Interrupt link LNKB configured for IRQ 7 [ 0.504056] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.504226] ACPI: PCI: Interrupt link LNKD configured for IRQ 5 [ 0.504386] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.504398] ACPI: PCI: Interrupt link LNKE disabled [ 0.504553] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.504565] ACPI: PCI: Interrupt link LNKF disabled [ 0.504722] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.504907] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 0.505685] iommu: Default domain type: Translated [ 0.505700] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.505786] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.505799] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.505822] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.505831] vgaarb: loaded [ 0.506006] SCSI subsystem initialized [ 0.506038] libata version 3.00 loaded. [ 0.506038] ACPI: bus type USB registered [ 0.506038] usbcore: registered new interface driver usbfs [ 0.506038] usbcore: registered new interface driver hub [ 0.506038] usbcore: registered new device driver usb [ 0.506045] mc: Linux media interface: v0.10 [ 0.506076] videodev: Linux video capture interface: v2.00 [ 0.506099] pps_core: LinuxPPS API ver. 1 registered [ 0.506108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.506125] PTP clock support registered [ 0.506797] Registered efivars operations [ 0.507079] Advanced Linux Sound Architecture Driver Initialized. [ 0.507427] NetLabel: Initializing [ 0.507438] NetLabel: domain hash size = 128 [ 0.507445] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.507489] NetLabel: unlabeled traffic allowed by default [ 0.507554] PCI: Using ACPI for IRQ routing [ 0.520780] PCI: pci_cache_line_size set to 64 bytes [ 0.520877] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.520890] e820: reserve RAM buffer [mem 0x020d9018-0x03ffffff] [ 0.520897] e820: reserve RAM buffer [mem 0x021da018-0x03ffffff] [ 0.520901] e820: reserve RAM buffer [mem 0x02215018-0x03ffffff] [ 0.520905] e820: reserve RAM buffer [mem 0x02237018-0x03ffffff] [ 0.520908] e820: reserve RAM buffer [mem 0xcf32d000-0xcfffffff] [ 0.520913] e820: reserve RAM buffer [mem 0xcf5bb000-0xcfffffff] [ 0.520917] e820: reserve RAM buffer [mem 0xcf6f0000-0xcfffffff] [ 0.520933] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.520933] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.522856] clocksource: Switched to clocksource hpet [ 0.562415] VFS: Disk quotas dquot_6.6.0 [ 0.562484] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.562672] pnp: PnP ACPI init [ 0.563227] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.563449] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.563471] system 00:01: [io 0xffff] has been reserved [ 0.563487] system 00:01: [io 0xffff] has been reserved [ 0.563503] system 00:01: [io 0xffff] has been reserved [ 0.563518] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.563534] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.563550] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.563807] system 00:02: [io 0x06a0-0x06af] has been reserved [ 0.563828] system 00:02: [io 0x06b0-0x06ef] has been reserved [ 0.564481] system 00:04: [io 0x0a00-0x0a1f] has been reserved [ 0.564504] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.565856] pnp 00:07: [dma 3] [ 0.566922] pnp 00:08: [dma 0 disabled] [ 0.567792] pnp 00:09: [dma 0 disabled] [ 0.568852] ACPI: IRQ 10 override to edge, high [ 0.568877] pnp 00:0b: [dma 0 disabled] [ 0.569792] ACPI: IRQ 10 override to edge, high [ 0.569814] pnp 00:0c: [dma 0 disabled] [ 0.570689] ACPI: IRQ 10 override to edge, high [ 0.570710] pnp 00:0d: [dma 0 disabled] [ 0.571610] ACPI: IRQ 10 override to edge, high [ 0.571631] pnp 00:0e: [dma 0 disabled] [ 0.572070] system 00:0f: [io 0x04d0-0x04d1] has been reserved [ 0.572503] system 00:10: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.572526] system 00:10: [mem 0x00000000-0x00003fff] could not be reserved [ 0.572543] system 00:10: [mem 0x00000000-0x00000fff] could not be reserved [ 0.572560] system 00:10: [mem 0x00000000-0x00000fff] could not be reserved [ 0.572577] system 00:10: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.573278] system 00:11: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.573301] system 00:11: [mem 0xe0000000-0xefffffff] has been reserved [ 0.573872] system 00:12: [io 0x0400-0x047f] has been reserved [ 0.573893] system 00:12: [io 0x0500-0x053f] has been reserved [ 0.573915] system 00:12: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.573933] system 00:12: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.573949] system 00:12: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.573966] system 00:12: [mem 0xfed20000-0xfed8ffff] could not be reserved [ 0.573983] system 00:12: [mem 0xffe00000-0xffffffff] has been reserved [ 0.574020] pnp: PnP ACPI: found 19 devices [ 0.585252] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.585384] NET: Registered PF_INET protocol family [ 0.585651] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.587838] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.587905] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.588169] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.588487] TCP: Hash tables configured (established 32768 bind 32768) [ 0.588685] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.588813] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.589031] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.589391] RPC: Registered named UNIX socket transport module. [ 0.589411] RPC: Registered udp transport module. [ 0.589421] RPC: Registered tcp transport module. [ 0.589431] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.590149] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.590179] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.590204] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.590229] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.590254] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.590279] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.590328] pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0000000-0xd01fffff] [ 0.590355] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0200000-0xd03fffff 64bit pref] [ 0.590381] pci 0000:00:1c.1: BAR 9: assigned [mem 0xd0400000-0xd05fffff 64bit pref] [ 0.590407] pci 0000:00:1c.2: BAR 9: assigned [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.590433] pci 0000:00:1c.3: BAR 9: assigned [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.590455] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.590476] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.590493] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.590514] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff] [ 0.590533] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] [ 0.590558] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.590573] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.590593] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.590611] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd05fffff 64bit pref] [ 0.590637] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.590651] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.590671] pci 0000:00:1c.2: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.590689] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.590715] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.590729] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.590749] pci 0000:00:1c.3: bridge window [mem 0xdfc00000-0xdfcfffff] [ 0.590796] pci 0000:00:1c.3: bridge window [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.590825] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.590857] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.590872] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.590888] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window] [ 0.590903] pci_bus 0000:00: resource 7 [mem 0xcf800000-0xfebfffff window] [ 0.590920] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.590934] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd01fffff] [ 0.590949] pci_bus 0000:01: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref] [ 0.590967] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.590982] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff] [ 0.590997] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref] [ 0.591015] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.591029] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff] [ 0.591044] pci_bus 0000:03: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.591062] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.591076] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff] [ 0.591091] pci_bus 0000:04: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.591109] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.591124] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.591140] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000fffff window] [ 0.591155] pci_bus 0000:05: resource 7 [mem 0xcf800000-0xfebfffff window] [ 0.619012] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x720 took 25455 usecs [ 0.619090] PCI: CLS 64 bytes, default 64 [ 0.619119] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.619131] software IO TLB: mapped [mem 0x00000000cb32d000-0x00000000cf32d000] (64MB) [ 1.253206] Initialise system trusted keyrings [ 1.253385] workingset: timestamp_bits=56 max_order=20 bucket_order=0 [ 1.258828] NFS: Registering the id_resolver key type [ 1.258860] Key type id_resolver registered [ 1.258869] Key type id_legacy registered [ 1.258930] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.258946] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.258957] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.274053] NET: Registered PF_ALG protocol family [ 1.274075] xor: measuring software checksum speed [ 1.275555] prefetch64-sse : 6789 MB/sec [ 1.277215] generic_sse : 6090 MB/sec [ 1.277225] xor: using function: prefetch64-sse (6789 MB/sec) [ 1.277237] Key type asymmetric registered [ 1.277245] Asymmetric key parser 'x509' registered [ 1.277252] Asymmetric key parser 'pkcs8' registered [ 1.277540] kworker/u8:0 (53) used greatest stack depth: 14736 bytes left [ 1.278246] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.278323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.278337] io scheduler mq-deadline registered [ 1.278345] io scheduler kyber registered [ 1.280061] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.280201] ACPI: button: Power Button [PWRB] [ 1.280305] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.280379] ACPI: button: Sleep Button [SLPB] [ 1.280482] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.280586] ACPI: button: Power Button [PWRF] [ 1.281653] Monitor-Mwait will be used to enter C-1 state [ 1.281679] ACPI: _PR_.CPU0: Found 1 idle states [ 1.282192] ACPI: _PR_.CPU1: Found 1 idle states [ 1.282634] ACPI: _PR_.CPU2: Found 1 idle states [ 1.283107] ACPI: _PR_.CPU3: Found 1 idle states [ 1.284274] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.284293] ACPI: thermal: Thermal Zone [THRM] (53 C) [ 1.284566] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.284579] ACPI: thermal: Thermal Zone [TZ00] (27 C) [ 1.285335] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.285349] ACPI: thermal: Thermal Zone [TZ01] (27 C) [ 1.285563] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.285732] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.286017] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.286256] 00:0b: ttyS4 at I/O 0x4e0 (irq = 10, base_baud = 115200) is a 16550A [ 1.286478] 00:0c: ttyS5 at I/O 0x4e8 (irq = 10, base_baud = 115200) is a 16550A [ 1.286695] 00:0d: ttyS6 at I/O 0x4f0 (irq = 10, base_baud = 115200) is a 16550A [ 1.286947] 00:0e: ttyS7 at I/O 0x4f8 (irq = 10, base_baud = 115200) is a 16550A [ 1.290874] Non-volatile memory driver v1.3 [ 1.291063] Linux agpgart interface v0.103 [ 1.291167] ACPI: bus type drm_connector registered [ 1.291193] [drm:drm_core_init] Initialized [ 1.296421] loop: module loaded [ 1.296607] ahci 0000:00:1f.2: version 3.0 [ 1.296982] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.297043] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.297060] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part [ 1.298225] scsi host0: ahci [ 1.298686] scsi host1: ahci [ 1.299111] scsi host2: ahci [ 1.299511] scsi host3: ahci [ 1.299664] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24 [ 1.299682] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24 [ 1.299693] ata3: DUMMY [ 1.299699] ata4: DUMMY [ 1.300176] ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled [ 1.300256] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.300272] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 1.301143] scsi host4: ahci [ 1.301553] scsi host5: ahci [ 1.301707] ata5: SATA max UDMA/133 abar m512@0xdfc00000 port 0xdfc00100 irq 25 [ 1.301725] ata6: SATA max UDMA/133 abar m512@0xdfc00000 port 0xdfc00180 irq 25 [ 1.302127] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 1.302145] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 1.302703] e100: Intel(R) PRO/100 Network Driver [ 1.302714] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.302752] e1000: Intel(R) PRO/1000 Network Driver [ 1.302760] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.302839] e1000e: Intel(R) PRO/1000 Network Driver [ 1.302848] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.302898] sky2: driver version 1.30 [ 1.303206] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.305013] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 00:30:18:a1:77:72, XID 2c9, IRQ 26 [ 1.305039] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.305267] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.306867] r8169 0000:03:00.0 eth1: RTL8168evl/8111evl, 00:30:18:a1:77:73, XID 2c9, IRQ 27 [ 1.306892] r8169 0000:03:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.307169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.307183] ehci-pci: EHCI PCI platform driver [ 1.307464] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.307612] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.307647] ehci-pci 0000:00:1d.7: debug port 1 [ 1.311643] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000 [ 1.317800] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.317922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 [ 1.317939] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.317950] usb usb1: Product: EHCI Host Controller [ 1.317959] usb usb1: Manufacturer: Linux 5.17.3 ehci_hcd [ 1.317967] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.318302] hub 1-0:1.0: USB hub found [ 1.318337] hub 1-0:1.0: 8 ports detected [ 1.319044] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.319073] ohci-pci: OHCI PCI platform driver [ 1.319113] uhci_hcd: USB Universal Host Controller Interface driver [ 1.319320] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.319481] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.319539] uhci_hcd 0000:00:1d.0: irq 23, io port 0x0000f0a0 [ 1.319693] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.319709] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.319721] usb usb2: Product: UHCI Host Controller [ 1.319730] usb usb2: Manufacturer: Linux 5.17.3 uhci_hcd [ 1.319739] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.320085] hub 2-0:1.0: USB hub found [ 1.320114] hub 2-0:1.0: 2 ports detected [ 1.320647] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.320841] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.320923] uhci_hcd 0000:00:1d.1: irq 19, io port 0x0000f080 [ 1.321072] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.321089] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.321100] usb usb3: Product: UHCI Host Controller [ 1.321109] usb usb3: Manufacturer: Linux 5.17.3 uhci_hcd [ 1.321117] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.321434] hub 3-0:1.0: USB hub found [ 1.321462] hub 3-0:1.0: 2 ports detected [ 1.322048] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.322206] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.322288] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000f060 [ 1.322441] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.322457] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.322469] usb usb4: Product: UHCI Host Controller [ 1.322478] usb usb4: Manufacturer: Linux 5.17.3 uhci_hcd [ 1.322487] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.322971] hub 4-0:1.0: USB hub found [ 1.323001] hub 4-0:1.0: 2 ports detected [ 1.323532] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.323696] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.323950] uhci_hcd 0000:00:1d.3: irq 16, io port 0x0000f040 [ 1.324098] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.17 [ 1.324114] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.324126] usb usb5: Product: UHCI Host Controller [ 1.324135] usb usb5: Manufacturer: Linux 5.17.3 uhci_hcd [ 1.324143] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.324480] hub 5-0:1.0: USB hub found [ 1.324510] hub 5-0:1.0: 2 ports detected [ 1.325025] usbcore: registered new interface driver usblp [ 1.325086] usbcore: registered new interface driver usb-storage [ 1.325144] usbcore: registered new interface driver ftdi_sio [ 1.325170] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.325378] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.326070] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.326094] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.326813] usbcore: registered new interface driver usbtouchscreen [ 1.326972] rtc_cmos 00:03: RTC can wake from S4 [ 1.327517] rtc_cmos 00:03: registered as rtc0 [ 1.327574] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.327694] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001) [ 1.327936] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.328485] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 1.330449] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.332392] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.332520] usbcore: registered new interface driver uvcvideo [ 1.332849] f71808e_wdt: Found f71869 watchdog chip, revision 32 [ 1.333378] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 1.333402] intel_pstate: CPU model not supported [ 1.333492] EFI Variables Facility v0.08 2004-May-17 [ 1.397258] hid: raw HID events driver (C) Jiri Kosina [ 1.397752] usbcore: registered new interface driver usbhid [ 1.397787] usbhid: USB HID core driver [ 1.398228] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 1.400148] Initializing XFRM netlink socket [ 1.400474] NET: Registered PF_INET6 protocol family [ 1.401304] Segment Routing with IPv6 [ 1.401336] In-situ OAM (IOAM) with IPv6 [ 1.401423] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.401821] NET: Registered PF_PACKET protocol family [ 1.401888] Key type dns_resolver registered [ 1.402460] microcode: sig=0x30661, pf=0x4, revision=0x10d [ 1.402527] microcode: Microcode Update Driver: v2.2. [ 1.402538] IPI shorthand broadcast: enabled [ 1.402754] registered taskstats version 1 [ 1.402801] Loading compiled-in X.509 certificates [ 1.408664] [drm:psb_intel_opregion_setup] OpRegion detected at 0xcf3c7018 [ 1.408696] [drm:psb_intel_opregion_setup] Public ACPI methods supported [ 1.408704] [drm:psb_intel_opregion_setup] ASLE supported [ 1.408829] [drm:psb_intel_init_bios] Using VBT from OpRegion: $VBT CEDARVIEW d [ 1.408842] [drm:psb_intel_init_bios] LVDS VBT config bits: 0x1 [ 1.408854] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.408876] [drm:psb_intel_init_bios] No SDVO device info is found in VBT [ 1.408886] [drm:psb_intel_init_bios] EDP timing in vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.408898] [drm:psb_intel_init_bios] VBT reports EDP: Lane_count 1, Lane_rate 6, Bpp 18 [ 1.408907] [drm:psb_intel_init_bios] VBT reports EDP: VSwing 0, Preemph 0 [ 1.409483] snd_hda_intel 0000:00:1b.0: Cannot probe codecs, giving up [ 1.415642] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.416038] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.421946] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm LVDSDDC_C [ 1.422609] [drm:cdv_intel_dp_init] i2c_init DPDDC-B [ 1.423121] [drm:cdv_intel_dp_aux_ch] dp_aux_ch timeout status 0x51440064 [ 1.423132] [drm:cdv_intel_dp_i2c_aux_ch] aux_ch failed -110 [ 1.423641] [drm:cdv_intel_dp_aux_ch] dp_aux_ch timeout status 0x51440064 [ 1.423647] [drm:cdv_intel_dp_i2c_aux_ch] aux_ch failed -110 [ 1.424348] [drm:cdv_intel_dp_init] i2c_init DPDDC-C [ 1.424558] [drm:cdv_intel_dp_i2c_aux_ch] aux_i2c nack [ 1.609238] ata5: SATA link down (SStatus 0 SControl 300) [ 1.609350] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.611381] ata1.00: ATA-11: ST8000VN004-2M2101, SC60, max UDMA/133 [ 1.624215] ata1.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.624680] ata1.00: Features: NCQ-sndrcv [ 1.639743] ata1.00: configured for UDMA/133 [ 1.640022] scsi 0:0:0:0: Direct-Access ATA ST8000VN004-2M21 SC60 PQ: 0 ANSI: 5 [ 1.640674] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.640944] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.640969] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.641031] sd 0:0:0:0: [sda] Write Protect is off [ 1.641048] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.641144] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.677986] sda: sda1 sda2 sda3 sda4 [ 1.679250] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.789797] usb 1-7: new high-speed USB device number 2 using ehci-pci [ 1.796661] [drm:drm_minor_register] [ 1.796671] [drm:drm_minor_register] [ 1.796866] [drm:drm_minor_register] new minor registered 0 [ 1.796899] [drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs [ 1.796970] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:37:VGA-1] generating connector hotplug event [ 1.796991] [drm:drm_sysfs_connector_add] adding "LVDS-1" to sysfs [ 1.797048] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:39:LVDS-1] generating connector hotplug event [ 1.797067] [drm:drm_sysfs_connector_add] adding "DVI-D-1" to sysfs [ 1.797124] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:41:DVI-D-1] generating connector hotplug event [ 1.797143] [drm:drm_sysfs_connector_add] adding "DP-1" to sysfs [ 1.797211] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:43:DP-1] generating connector hotplug event [ 1.797231] [drm:drm_sysfs_connector_add] adding "DVI-D-2" to sysfs [ 1.797286] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:47:DVI-D-2] generating connector hotplug event [ 1.797306] [drm:drm_sysfs_connector_add] adding "DP-2" to sysfs [ 1.797366] gma500 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:49:DP-2] generating connector hotplug event [ 1.797383] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0 [ 1.797548] PM: Magic number: 2:885:605 [ 1.797803] printk: console [netcon0] enabled [ 1.797823] netconsole: network logging started [ 1.798288] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.800469] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.800508] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 1.800601] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.800618] cfg80211: failed to load regulatory.db [ 1.800673] ALSA device list: [ 1.800682] No soundcards found. [ 1.922723] usb 1-7: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 1.00 [ 1.922744] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.922756] usb 1-7: Product: Composite KVM Device [ 1.922782] usb 1-7: Manufacturer: PiKVM [ 1.922792] usb 1-7: SerialNumber: CAFEBABE [ 1.924589] input: PiKVM Composite KVM Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/0003:1D6B:0104.0001/input/input7 [ 1.945295] ata2: SATA link down (SStatus 0 SControl 300) [ 1.976209] hid-generic 0003:1D6B:0104.0001: input,hidraw0: USB HID v1.01 Keyboard [PiKVM Composite KVM Device] on usb-0000:00:1d.7-7/input0 [ 1.977524] input: PiKVM Composite KVM Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.1/0003:1D6B:0104.0002/input/input8 [ 1.977718] hid-generic 0003:1D6B:0104.0002: input,hidraw1: USB HID v1.01 Mouse [PiKVM Composite KVM Device] on usb-0000:00:1d.7-7/input1 [ 1.978017] usb-storage 1-7:1.2: USB Mass Storage device detected [ 1.978367] scsi host6: usb-storage 1-7:1.2 [ 2.249330] ata6: SATA link down (SStatus 0 SControl 300) [ 2.249409] md: Waiting for all devices to be available before autodetect [ 2.249428] md: If you don't use raid, use raid=noautodetect [ 2.249438] md: Autodetecting RAID arrays. [ 2.249445] md: autorun ... [ 2.249451] md: ... autorun DONE. [ 2.284100] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 2.284157] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 2.289452] devtmpfs: mounted [ 2.290465] Freeing unused kernel image (initmem) memory: 1276K [ 2.290502] Write protecting the kernel read-only data: 26624k [ 2.292741] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 2.293330] Freeing unused kernel image (rodata/data gap) memory: 576K [ 2.293378] Run /sbin/init as init process [ 2.293386] with arguments: [ 2.293388] /sbin/init [ 2.293390] with environment: [ 2.293392] HOME=/ [ 2.293394] TERM=linux [ 2.366396] random: fast init done [ 2.640327] modprobe (131) used greatest stack depth: 13272 bytes left [ 3.012832] scsi 6:0:0:0: CD-ROM Pi-KVM CD-ROM Drive 0515 PQ: 0 ANSI: 2 [ 3.013919] sr 6:0:0:0: Power-on or device reset occurred [ 3.015922] sr 6:0:0:0: [sr0] scsi-1 drive [ 3.015951] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.017937] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 3.018298] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 3.073506] random: crng init done [ 3.073583] systemd[1]: Successfully credited entropy passed from boot loader. [ 3.087669] systemd[1]: systemd 250 running in system mode (-PAM -AUDIT -SELINUX -APPARMOR -IMA -SMACK -SECCOMP +GCRYPT -GNUTLS +OPENSSL -ACL +BLKID +CURL +ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 -LZ4 +XZ +ZLIB -ZSTD -BPF_FRAMEWORK +XKBCOMMON -UTMP -SYSVINIT default-hierarchy=unified) [ 3.099946] systemd[1]: Detected architecture x86-64. [ 3.116051] systemd[1]: Hostname set to <buildroot>. [ 3.198714] systemd[1]: Using hardware watchdog 'f71869 watchdog', version 0, device /dev/watchdog0 [ 3.198826] systemd[1]: Watchdog running with a timeout of 20s. [ 3.376159] lvm2-activation (134) used greatest stack depth: 13040 bytes left [ 3.669552] systemd[1]: /usr/lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock \xe2\x86\x92 /run/cups/cups.sock; please update the unit file accordingly. [ 3.769471] systemd[1]: Configuration file /usr/lib/systemd/system/cups-browsed.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.790826] systemd[1]: Queued start job for default target Multi-User System. [ 3.794238] systemd[1]: Created slice Slice /system/getty. [ 3.795574] systemd[1]: Created slice Slice /system/modprobe. [ 3.796808] systemd[1]: Created slice Slice /system/systemd-fsck. [ 3.797595] systemd[1]: Created slice User and Session Slice. [ 3.798125] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.798610] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.799302] systemd[1]: Reached target NFS client services. [ 3.799619] systemd[1]: Reached target Preparation for Remote File Systems. [ 3.799881] systemd[1]: Reached target Remote File Systems. [ 3.800143] systemd[1]: Reached target Slice Units. [ 3.800381] systemd[1]: Reached target Swaps. [ 3.801006] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.810395] systemd[1]: Listening on RPCbind Server Activation Socket. [ 3.810756] systemd[1]: Reached target RPC Port Mapper. [ 3.811760] systemd[1]: Listening on Journal Audit Socket. [ 3.812577] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.813412] systemd[1]: Listening on Journal Socket. [ 3.814379] systemd[1]: Listening on udev Control Socket. [ 3.815129] systemd[1]: Listening on udev Kernel Socket. [ 3.817551] systemd[1]: Mounting Huge Pages File System... [ 3.820239] systemd[1]: Mounting POSIX Message Queue File System... [ 3.822579] systemd[1]: Mounting NFSD configuration filesystem... [ 3.825481] systemd[1]: Mounting Kernel Debug File System... [ 3.828256] systemd[1]: Mounting Kernel Trace File System... [ 3.838066] systemd[1]: Mounting Temporary Directory /tmp... [ 3.842638] systemd[1]: Starting Availability of block devices... [ 3.847458] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. [ 3.848210] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/5.17.3/modules.devname). [ 3.851051] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.855644] systemd[1]: Starting Load Kernel Module configfs... [ 3.860307] systemd[1]: Starting Load Kernel Module drm... [ 3.866045] systemd[1]: Starting Load Kernel Module fuse... [ 3.871128] systemd[1]: Starting RPC Bind... [ 3.875478] systemd[1]: Starting File System Check on Root Device... [ 3.883606] systemd[1]: Starting Journal Service... [ 3.889320] systemd[1]: Starting Load Kernel Modules... [ 3.893403] systemd[1]: Starting Generate network units from Kernel command line... [ 3.897368] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.901865] systemd[1]: Starting Coldplug All udev Devices... [ 3.914641] systemd[1]: Mounted Huge Pages File System. [ 3.915500] systemd[1]: Mounted POSIX Message Queue File System. [ 3.916310] systemd[1]: Mounted NFSD configuration filesystem. [ 3.916941] systemd[1]: Mounted Kernel Debug File System. [ 3.917519] systemd[1]: Mounted Kernel Trace File System. [ 3.918143] systemd[1]: Mounted Temporary Directory /tmp. [ 3.919253] systemd[1]: Finished Availability of block devices. [ 3.920520] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.921185] systemd[1]: Finished Load Kernel Module configfs. [ 3.922998] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 3.926339] systemd[1]: Finished Load Kernel Module drm. [ 3.928215] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 3.929008] systemd[1]: Finished Load Kernel Module fuse. [ 3.930512] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 3.931920] systemd[1]: Finished Load Kernel Modules. [ 3.932969] systemd[1]: Finished Generate network units from Kernel command line. [ 3.934563] systemd[1]: FUSE Control File System was skipped because of a failed condition check (ConditionPathExists=/sys/fs/fuse/connections). [ 3.935084] systemd[1]: Kernel Configuration File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/config). [ 3.938204] systemd[1]: Starting Apply Kernel Variables... [ 3.966537] systemd[1]: Started RPC Bind. [ 3.983638] systemd[1]: Finished File System Check on Root Device. [ 3.987860] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.995512] systemd[1]: Finished Apply Kernel Variables. [ 4.040333] systemd[1]: Finished Create Static Device Nodes in /dev. [ 4.054160] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 4.060927] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.061715] systemd[1]: Reached target Preparation for Local File Systems. [ 4.062627] systemd[1]: Set up automount EFI System Partition Automount. [ 4.064361] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [ 4.064642] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 4.068194] systemd[1]: Starting Load/Save Random Seed... [ 4.072871] audit: type=1334 audit(1650411258.779:2): prog-id=6 op=LOAD [ 4.073179] audit: type=1334 audit(1650411258.779:3): prog-id=7 op=LOAD [ 4.073375] audit: type=1334 audit(1650411258.779:4): prog-id=8 op=LOAD [ 4.075487] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 4.127404] systemd[1]: Finished Load/Save Random Seed. [ 4.128284] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes). [ 4.254132] systemd[1]: Started Journal Service. [ 4.285483] systemd-journald[163]: Received client request to flush runtime journal. [ 4.712084] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 4.727701] r8169 0000:03:00.0 enp3s0: renamed from eth1 [ 5.682272] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6.500338] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none. [ 6.618598] audit: type=1334 audit(1650411261.324:5): prog-id=9 op=LOAD [ 6.624355] audit: type=1334 audit(1650411261.330:6): prog-id=10 op=LOAD [ 6.964574] audit: type=1325 audit(1650411261.670:7): table=mangle family=2 entries=0 op=xt_register pid=250 subj=kernel comm="iptables-restor" [ 6.964700] audit: type=1300 audit(1650411261.670:7): arch=c000003e syscall=55 success=yes exit=0 a0=5 a1=0 a2=40 a3=7ffdf5f4a174 items=0 ppid=1 pid=250 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/sbin/xtables-legacy-multi" subj=kernel key=(null) [ 6.964752] audit: type=1327 audit(1650411261.670:7): proctitle=2F7573722F7362696E2F69707461626C65732D726573746F7265002F6574632F69707461626C65732E72756C6573 [ 6.979073] audit: type=1334 audit(1650411261.685:8): prog-id=11 op=LOAD [ 6.979474] audit: type=1334 audit(1650411261.685:9): prog-id=12 op=LOAD [ 6.979675] audit: type=1334 audit(1650411261.685:10): prog-id=13 op=LOAD [ 6.999636] audit: type=1325 audit(1650411261.705:11): table=mangle family=2 entries=6 op=xt_replace pid=250 subj=kernel comm="iptables-restor" [ 6.999688] audit: type=1300 audit(1650411261.705:11): arch=c000003e syscall=54 success=yes exit=0 a0=5 a1=0 a2=40 a3=55a71ccfe830 items=0 ppid=1 pid=250 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/sbin/xtables-legacy-multi" subj=kernel key=(null) [ 7.449208] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [ 7.496653] [drm:drm_stub_open] [ 7.496680] [drm:drm_open] comm="weston", pid=267, minor=0 [ 7.496721] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_GET_MAGIC [ 7.496748] gma500 0000:00:02.0: [drm:drm_getmagic] 1 [ 7.496854] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_AUTH_MAGIC [ 7.496875] gma500 0000:00:02.0: [drm:drm_authmagic] 1 [ 7.496917] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 7.496950] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 7.497184] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 7.497212] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 7.497228] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 7.497244] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_SET_CLIENT_CAP [ 7.497263] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 7.497280] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_SET_CLIENT_CAP [ 7.497291] [drm:drm_ioctl] comm="weston", pid=267, ret=-95 [ 7.497370] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP [ 7.497443] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_SET_CLIENT_CAP [ 7.497459] [drm:drm_ioctl] comm="weston", pid=267, ret=-22 [ 7.497474] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_SET_CLIENT_CAP [ 7.497609] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 7.497639] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 7.497666] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.497690] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.497714] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.497735] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.497758] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES [ 7.497810] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES [ 7.497831] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE [ 7.497850] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE [ 7.497893] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.497916] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.497940] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.497962] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.497998] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE [ 7.498018] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE [ 7.498042] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.498064] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.498089] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.498111] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.709430] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 7.709719] r8169 0000:02:00.0 enp2s0: Link is Down [ 7.893116] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 7.893148] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] [ 7.907826] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] status updated from unknown to disconnected [ 7.907867] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] disconnected [ 7.907885] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 7.907916] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 7.907937] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 7.907978] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.907998] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 7.908016] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.908036] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 7.908062] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908084] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908111] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908134] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908163] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908185] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908211] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908233] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908257] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908277] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.908698] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 7.908726] [drm:drm_ioctl] comm="weston", pid=267, ret=-2 [ 7.908873] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 7.908896] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] [ 7.908910] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] status updated from unknown to connected [ 7.910097] [drm:drm_sysfs_hotplug_event] generating hotplug event [ 7.919643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 7.919722] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] probed modes : [ 7.919736] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 7.919755] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 7.919814] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 7.919838] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 7.919878] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.919896] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 7.919912] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 7.919928] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 7.919950] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.919969] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.919992] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920012] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920038] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920058] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920080] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920099] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920120] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920138] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920159] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920178] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920201] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920221] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 7.920565] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 7.920587] [drm:drm_ioctl] comm="weston", pid=267, ret=-2 [ 7.920674] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 7.920694] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] [ 7.978488] r8169 0000:03:00.0 enp3s0: Link is Down [ 8.339483] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 8.339510] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 8.339522] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 8.339532] [drm:drm_add_display_info] CEA VCDB 0x7f [ 8.456152] ip (363) used greatest stack depth: 12512 bytes left [ 8.492837] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] status updated from unknown to connected [ 8.846656] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 8.846682] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 8.846693] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 8.846703] [drm:drm_add_display_info] CEA VCDB 0x7f [ 8.952797] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 8.952834] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 8.952848] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 8.952858] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 8.952867] [drm:drm_add_display_info] CEA VCDB 0x7f [ 8.952881] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (1) [ 8.952896] [drm:drm_add_edid_modes] ELD monitor Toshiba-H2C [ 8.952906] [drm:drm_add_edid_modes] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 8.952918] [drm:drm_add_edid_modes] ELD size 32, SAD count 0 [ 8.952928] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 8.952938] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 8.952947] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 8.952955] [drm:drm_add_display_info] CEA VCDB 0x7f [ 8.954755] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] probed modes : [ 8.954803] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 8.954824] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 8.954841] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 8.954856] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 8.954870] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 8.954884] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 8.954899] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 8.954914] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 8.954928] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106470 1440 1520 1672 1904 900 901 907 934 0x40 0xa [ 8.954943] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 8.954957] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 8.954972] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 8.954987] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74250 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 8.955001] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74176 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 8.955015] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 25 74250 1280 3700 3740 3960 720 725 730 750 0x40 0x5 [ 8.955029] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59400 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 8.955045] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59341 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 8.955060] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 8.955075] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 8.955090] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 8.955104] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 8.955119] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 8.955133] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 8.955148] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 8.955162] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 8.955177] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 8.955191] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 8.955206] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0x5 [ 8.955220] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 8.955234] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 8.955249] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 8.955263] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 8.955278] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 8.955292] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 8.955307] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 8.955322] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 8.955337] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 8.955355] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (2) [ 8.955391] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 8.955429] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (2) [ 8.955475] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 8.955494] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (2) [ 8.955509] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 8.955524] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (2) [ 8.955544] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955563] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955583] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955602] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955625] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955643] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955664] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955682] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955702] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955718] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955737] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955755] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.955817] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 8.955832] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 8.955846] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 8.955860] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 8.956182] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 8.956203] [drm:drm_ioctl] comm="weston", pid=267, ret=-2 [ 8.956280] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 8.956299] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] [ 8.956818] [drm:cdv_intel_dp_aux_ch] dp_aux_ch timeout status 0x51440064 [ 8.956832] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] status updated from unknown to disconnected [ 8.956844] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] disconnected [ 8.956858] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 8.956879] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 8.956897] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 8.956927] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 8.956945] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 8.956959] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 8.956974] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 8.956994] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957012] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957031] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957049] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957072] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957090] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957113] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957132] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957152] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957168] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957187] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957206] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957227] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957246] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 8.957492] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 8.957513] [drm:drm_ioctl] comm="weston", pid=267, ret=-2 [ 8.957581] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 8.957599] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] [ 9.024855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm HDMIC [ 9.024884] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] status updated from unknown to disconnected [ 9.024900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] disconnected [ 9.038791] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 9.038844] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 9.038869] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 9.038912] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.038930] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 9.038945] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.038961] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 9.038981] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.038999] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039020] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039038] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039062] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039080] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039102] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039120] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039140] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039156] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039175] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039193] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.039491] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 9.039513] [drm:drm_ioctl] comm="weston", pid=267, ret=-2 [ 9.039586] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 9.039604] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] [ 9.039822] [drm:cdv_intel_dp_detect] DPCD: Rev=10 LN_Rate=a LN_CNT=82 LN_DOWNSP=40 [ 9.040854] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 9.067652] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 9.067681] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 9.067693] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 9.095808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] status updated from unknown to connected [ 9.096907] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 9.127250] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 9.127282] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 9.127297] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 9.154824] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (1) [ 9.154858] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 9.154872] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 9.154887] [drm:drm_mode_object_put.part.0] OBJ ID: 53 (1) [ 9.154902] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 9.154912] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 9.154923] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 9.155114] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] probed modes : [ 9.155129] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 56120 1024 1072 1104 1184 768 771 775 790 0x48 0x9 [ 9.155149] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 50 46760 1024 1072 1104 1184 768 771 775 790 0x40 0x9 [ 9.155168] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (2) [ 9.155202] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 9.155228] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (2) [ 9.155266] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.155285] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (2) [ 9.155303] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 9.155321] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (2) [ 9.155345] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155366] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155390] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155412] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155440] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155462] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155487] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155508] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155531] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155550] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155572] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155594] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155620] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155643] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 9.155669] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 9.155686] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (2) [ 9.155702] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 9.155715] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (2) [ 9.172105] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 9.172134] [drm:drm_ioctl] comm="weston", pid=267, ret=-2 [ 9.172882] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER [ 9.172926] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC [ 9.172950] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_CREATE_DUMB [ 9.172997] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_ADDFB2 [ 9.173019] [drm:drm_mode_addfb2] [FB:53] [ 9.173033] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_MAP_DUMB [ 9.173080] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_CREATE_DUMB [ 9.173109] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_ADDFB2 [ 9.173127] [drm:drm_mode_addfb2] [FB:54] [ 9.173138] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_MAP_DUMB [ 9.246320] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETCRTC [ 9.246352] [drm:drm_mode_setcrtc] [CRTC:32:crtc-0] [ 9.246366] [drm:drm_crtc_helper_set_config] [ 9.246375] [drm:drm_crtc_helper_set_config] [CRTC:32:crtc-0] [NOFB] [ 9.329803] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETCRTC [ 9.329835] [drm:drm_mode_setcrtc] [CRTC:34:crtc-1] [ 9.329856] [drm:drm_mode_setcrtc] [CONNECTOR:41:DVI-D-1] [ 9.329866] [drm:drm_crtc_helper_set_config] [ 9.329876] [drm:drm_crtc_helper_set_config] [CRTC:34:crtc-1] [FB:54] #connectors=1 (x y) (0 0) [ 9.329894] [drm:drm_crtc_helper_set_config] crtc has no fb, full mode set [ 9.329903] [drm:drm_crtc_helper_set_config] modes are different, full mode set [ 9.329911] [drm:drm_mode_debug_printmodeline] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.329926] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 9.329941] [drm:drm_mode_object_get] OBJ ID: 41 (2) [ 9.329952] [drm:drm_crtc_helper_set_config] encoder changed, full mode switch [ 9.329962] [drm:drm_crtc_helper_set_config] crtc changed, full mode switch [ 9.329970] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] to [CRTC:34:crtc-1] [ 9.329983] [drm:drm_crtc_helper_set_config] attempting to set mode from userspace [ 9.329992] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 9.330009] [drm:drm_crtc_helper_set_mode] [CRTC:34:crtc-1] [ 9.350047] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 9.367795] [drm:cdv_sb_write] 0x00008038: 0x0068a701 (before) [ 9.367819] [drm:cdv_sb_write] 0x00008038: 0x0068a701 [ 9.373803] [drm:cdv_sb_write] 0x00008038: 0x0068a701 (after) [ 9.376803] [drm:cdv_intel_crtc_mode_set] use DPLLA for pipe B [ 9.379804] [drm:cdv_sb_write] 0x00008030: 0x7e40421c (before) [ 9.379826] [drm:cdv_sb_write] 0x00008030: 0x7e40421c [ 9.385800] [drm:cdv_sb_write] 0x00008030: 0x7e40421c (after) [ 9.391802] [drm:cdv_sb_write] 0x00008028: 0x5900217f (before) [ 9.391827] [drm:cdv_sb_write] 0x00008028: 0x6c00217f [ 9.397797] [drm:cdv_sb_write] 0x00008028: 0x6c00217f (after) [ 9.403801] [drm:cdv_sb_write] 0x00008034: 0x16000157 (before) [ 9.403825] [drm:cdv_sb_write] 0x00008034: 0x84000157 [ 9.409803] [drm:cdv_sb_write] 0x00008034: 0x84000157 (after) [ 9.415796] [drm:cdv_sb_write] 0x0000803c: 0x85552000 (before) [ 9.415818] [drm:cdv_sb_write] 0x0000803c: 0x05554000 [ 9.421797] [drm:cdv_sb_write] 0x0000803c: 0x05554000 (after) [ 9.427802] [drm:cdv_sb_write] 0x00000120: 0x003000c4 (before) [ 9.427827] [drm:cdv_sb_write] 0x00000120: 0x003000c4 [ 9.433798] [drm:cdv_sb_write] 0x00000120: 0x003000c4 (after) [ 9.439800] [drm:cdv_sb_write] 0x00000220: 0x003000c4 (before) [ 9.439826] [drm:cdv_sb_write] 0x00000220: 0x003000c4 [ 9.445798] [drm:cdv_sb_write] 0x00000220: 0x003000c4 (after) [ 9.445975] [drm:cdv_intel_crtc_mode_set] Mode for pipe B: [ 9.445986] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 9.505801] [drm:drm_crtc_helper_set_mode] [ENCODER:42:TMDS-42] set [MODE:1280x720] [ 9.546058] gma500 0000:00:02.0: [drm:drm_calc_timestamping_constants] crtc 34: hwmode: htotal 1650, vtotal 750, vdisplay 720 [ 9.546086] gma500 0000:00:02.0: [drm:drm_calc_timestamping_constants] crtc 34: clock 74250 kHz framedur 16666666 linedur 22222 [ 9.546100] [drm:drm_crtc_helper_set_config] Setting connector DPMS state to on [ 9.546111] [drm:drm_crtc_helper_set_config] [CONNECTOR:41:DVI-D-1] set DPMS on [ 9.626191] [drm:drm_mode_object_get] OBJ ID: 54 (2) [ 9.626218] [drm:drm_mode_object_put.part.0] OBJ ID: 54 (3) [ 9.626229] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (3) [ 9.761878] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_PAGE_FLIP [ 9.761928] gma500 0000:00:02.0: [drm:drm_vblank_enable] enabling vblank on crtc 1, ret: 0 [ 9.761951] [drm:drm_mode_object_get] OBJ ID: 54 (3) [ 9.761963] [drm:drm_mode_object_put.part.0] OBJ ID: 54 (4) [ 9.761971] [drm:drm_mode_object_put.part.0] OBJ ID: 54 (3) [ 9.761987] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETPROPERTY [ 9.762006] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (3) [ 10.473272] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off [ 10.473315] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 16.565535] NFSD: Using nfsdcld client tracking operations. [ 16.565556] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000) [ 17.209108] ip (501) used greatest stack depth: 12272 bytes left [ 18.179836] [drm:drm_sysfs_hotplug_event] generating hotplug event [ 18.185745] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 18.185828] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES [ 18.185858] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 18.185878] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] [ 18.197800] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:VGA-1] disconnected [ 18.197835] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 18.197870] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 18.197892] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 18.197913] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 18.197930] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 18.197945] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 18.197961] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2) [ 18.197996] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198015] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198035] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198054] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198080] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198098] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198120] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198139] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198158] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198175] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.198208] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 18.198225] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] [ 18.207564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm LVDSBLC_B [ 18.209689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:LVDS-1] probed modes : [ 18.209714] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 18.209737] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 18.209825] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 18.209852] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 18.209878] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 18.209898] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 18.209915] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 18.209933] [drm:drm_mode_object_put.part.0] OBJ ID: 39 (2) [ 18.209968] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.209990] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210013] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210034] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210061] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210083] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210107] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210127] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210150] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210169] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210191] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210212] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210236] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210256] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 18.210298] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 18.210316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] [ 18.535911] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 18.535944] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 18.535954] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 18.535963] [drm:drm_add_display_info] CEA VCDB 0x7f [ 18.646792] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 18.963194] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 18.963222] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 18.963232] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 18.963240] [drm:drm_add_display_info] CEA VCDB 0x7f [ 19.096800] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (1) [ 19.096832] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 19.096844] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 19.096853] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 19.096862] [drm:drm_add_display_info] CEA VCDB 0x7f [ 19.096875] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 19.096889] [drm:drm_add_edid_modes] ELD monitor Toshiba-H2C [ 19.096898] [drm:drm_add_edid_modes] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 [ 19.096909] [drm:drm_add_edid_modes] ELD size 32, SAD count 0 [ 19.096919] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 19.096927] [drm:drm_add_display_info] HDMI: DVI dual 0, max TMDS clock 0 kHz [ 19.096936] [drm:drm_add_display_info] DVI-D-1: No deep color support on this HDMI sink. [ 19.096943] [drm:drm_add_display_info] CEA VCDB 0x7f [ 19.098659] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DVI-D-1] probed modes : [ 19.098682] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x48 0x5 [ 19.098700] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 19.098718] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 19.098735] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 19.098753] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 19.098801] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 19.098819] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 [ 19.098836] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 19.098854] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106470 1440 1520 1672 1904 900 901 907 934 0x40 0xa [ 19.098871] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 19.098888] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 19.098905] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 19.098921] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74250 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 19.098937] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 30 74176 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 19.098953] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 25 74250 1280 3700 3740 3960 720 725 730 750 0x40 0x5 [ 19.098969] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59400 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 19.098986] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 24 59341 1280 3040 3080 3300 720 725 730 750 0x40 0x5 [ 19.099004] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 19.099022] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 19.099039] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 19.099056] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 19.099074] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 19.099090] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 19.099106] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 19.099123] [drm:drm_mode_debug_printmodeline] Modeline "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 19.099140] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 19.099157] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 19.099175] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0x5 [ 19.099192] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 19.099210] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 19.099227] [drm:drm_mode_debug_printmodeline] Modeline "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 19.099244] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 19.099260] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 19.099277] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 19.099294] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 19.099310] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 19.099328] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 19.099351] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (3) [ 19.099411] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 19.099454] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (3) [ 19.099488] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 19.099508] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (3) [ 19.099525] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 19.099542] [drm:drm_mode_object_put.part.0] OBJ ID: 41 (3) [ 19.099593] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099614] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099639] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099662] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099691] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099712] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099737] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099756] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099811] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099832] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099855] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099878] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.099906] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 19.099923] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 19.099940] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 19.099955] [drm:drm_mode_object_put.part.0] OBJ ID: 55 (2) [ 19.100000] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 19.100020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] [ 19.100540] [drm:cdv_intel_dp_aux_ch] dp_aux_ch timeout status 0x51440064 [ 19.100556] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:43:DP-1] disconnected [ 19.100574] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 19.100596] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 19.100618] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 19.100640] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 19.100658] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 19.100674] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 19.100692] [drm:drm_mode_object_put.part.0] OBJ ID: 43 (2) [ 19.100727] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100748] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100808] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100831] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100861] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100882] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100905] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100924] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100947] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100966] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.100989] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.101011] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.101038] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.101060] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.101095] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 19.101114] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] [ 19.162825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter intel drm HDMIC [ 19.162851] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DVI-D-2] disconnected [ 19.162872] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 19.162904] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 19.162925] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 19.162948] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 19.162965] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 19.162979] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 19.162995] [drm:drm_mode_object_put.part.0] OBJ ID: 47 (2) [ 19.163028] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163047] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163068] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163087] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163112] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163130] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163151] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163168] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163187] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163204] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163222] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163241] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.163279] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 19.163296] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] [ 19.163513] [drm:cdv_intel_dp_detect] DPCD: Rev=10 LN_Rate=a LN_CNT=82 LN_DOWNSP=40 [ 19.164542] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 19.209565] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 19.209593] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 19.209607] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 19.245374] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (1) [ 19.246427] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 19.273720] [drm:i2c_algo_dp_aux_xfer] dp_aux_xfer return 2 [ 19.273743] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 19.273756] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 19.319827] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (1) [ 19.319869] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 19.319884] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 19.319900] [drm:drm_mode_object_put.part.0] OBJ ID: 52 (1) [ 19.319915] [drm:drm_add_edid_modes] ELD: no CEA Extension found [ 19.319926] [drm:drm_add_display_info] Supported Monitor Refresh rate range is 0 Hz - 0 Hz [ 19.319938] [drm:drm_add_display_info] DP-2: Assigning EDID-1.4 digital sink color depth as 8 bpc. [ 19.320134] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:DP-2] probed modes : [ 19.320152] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 56120 1024 1072 1104 1184 768 771 775 790 0x48 0x9 [ 19.320170] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 50 46760 1024 1072 1104 1184 768 771 775 790 0x40 0x9 [ 19.320191] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (2) [ 19.320239] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR [ 19.320266] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (2) [ 19.320295] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 19.320315] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (2) [ 19.320333] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_OBJ_GETPROPERTIES [ 19.320351] [drm:drm_mode_object_put.part.0] OBJ ID: 49 (2) [ 19.320385] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320408] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320434] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320459] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320488] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320509] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320534] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320555] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320579] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320600] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320621] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320643] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320669] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320690] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY [ 19.320716] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 19.320733] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2) [ 19.320752] [drm:drm_ioctl] comm="weston" pid=267, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPBLOB [ 19.320827] [drm:drm_mode_object_put.part.0] OBJ ID: 51 (2)
On Wed, Apr 20, 2022 at 1:42 AM James Hilliard james.hilliard1@gmail.com wrote:
On Tue, Apr 12, 2022 at 3:30 AM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Tue, Apr 12, 2022 at 3:48 AM James Hilliard james.hilliard1@gmail.com wrote:
On Mon, Apr 11, 2022 at 3:27 AM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 10:05 PM James Hilliard james.hilliard1@gmail.com wrote:
On Sun, Apr 10, 2022 at 1:52 PM Patrik Jakobsson patrik.r.jakobsson@gmail.com wrote:
On Sun, Apr 10, 2022 at 9:40 PM James Hilliard james.hilliard1@gmail.com wrote: > > On Sun, Apr 10, 2022 at 1:36 PM Patrik Jakobsson > patrik.r.jakobsson@gmail.com wrote: > > > > On Sat, Apr 9, 2022 at 6:23 AM James Hilliard james.hilliard1@gmail.com wrote: > > > > > > Select the efi framebuffer if efi is enabled. > > > > > > This appears to be needed for video output to function correctly. > > > > > > Signed-off-by: James Hilliard james.hilliard1@gmail.com > > > > Hi James, > > EFI_FB is its own driver and not needed by gma500 to drive its > > hardware. What makes you think it's required? > > I wasn't getting any HDMI video output without it enabled for some reason, > I assume it is doing some sort of initialization needed by gma500 > during startup.
Then it sounds like you might just be using EFI_FB and not gma500. Can you provide the kernel log with drm.debug=0x1f set on kernel command-line.
Seems efifb loads first and then hands off to gma500
That is how it normally works but efifb shouldn't change the state of the currently set mode so shouldn't affect gma500. From the logs I can see that you have LVDS (internal panel), HDMI and DP (3 displays in total) connected. This sounds wrong. Your version of gma500 (Cedarview) doesn't support more than 2 crtcs/pipes. This might be a problem.
Yeah, there's a bug there with the connector status, only DVI-D-1 is actually connected, I have DP-2 and LVDS-1 turned off in weston.
Ok, but are the connectors physically connected to anything?
There is one HDMI cable physically connected to the board
Regardless of what you do in Weston, the connectors shouldn't be getting modes if they aren't used.
Yeah, it seems there's a bug there, not sure if that's related to the output failure when efifb isn't available.
LVDS might be from VBIOS but I'm not sure where the DP modes come from. It would help if you also provide kernel logs with drm.debug=0x1f when the outputs doesn't work so I have something to compare with.
Log with efifb/fb not enabled in kernel build which causes no HDMI output:
After examining the logs I cannot see anything that stands out except for fbdev emulation not being enabled. Are you sure you just don't need to compile your kernel with FB support (CONFIG_FB)? If you are running weston on the fbdev backend then you would obviously not get any output if FB is not compiled into the kernel.
Hi
Am 09.04.22 um 06:23 schrieb James Hilliard:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Changes v2 -> v3:
- select EFI_FB instead of depending on it
Changes v1 -> v2:
- use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
- depends on FB
Why do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
Best regards Thomas
select DRM_KMS_HELPER # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915 select ACPI_VIDEO if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI
- select FB_EFI if EFI help Say yes for an experimental 2D KMS framebuffer driver for the Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and
On Thu, Apr 21, 2022 at 1:49 PM Thomas Zimmermann tzimmermann@suse.de wrote:
Hi
Am 09.04.22 um 06:23 schrieb James Hilliard:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Changes v2 -> v3:
- select EFI_FB instead of depending on it
Changes v1 -> v2:
- use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FBWhy do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
Hello Patrik,
On 4/21/22 14:39, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 1:49 PM Thomas Zimmermann tzimmermann@suse.de wrote:
Hi
Am 09.04.22 um 06:23 schrieb James Hilliard:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Changes v2 -> v3:
- select EFI_FB instead of depending on it
Changes v1 -> v2:
- use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FBWhy do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas javierm@redhat.com wrote:
Hello Patrik,
On 4/21/22 14:39, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 1:49 PM Thomas Zimmermann tzimmermann@suse.de wrote:
Hi
Am 09.04.22 um 06:23 schrieb James Hilliard:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Changes v2 -> v3:
- select EFI_FB instead of depending on it
Changes v1 -> v2:
- use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FBWhy do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
No, it shouldn't depend on any FBDEV stuff since it's not actually required. It just happens to help in this case since weston + fbdev backend works but not weston with drm backend (or whatever config James have set).
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
It's using drm fbdev emulation with gma500 so EFIFB has nothing to do with this. I believe it was just simply incorrectly reported. If I'm correct then "depends on FB" is what makes video output work for James.
-- Best regards,
Javier Martinez Canillas Linux Engineering Red Hat
Hi
Am 21.04.22 um 14:54 schrieb Patrik Jakobsson:
On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas javierm@redhat.com wrote:
Hello Patrik,
On 4/21/22 14:39, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 1:49 PM Thomas Zimmermann tzimmermann@suse.de wrote:
Hi
Am 09.04.22 um 06:23 schrieb James Hilliard:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Changes v2 -> v3: - select EFI_FB instead of depending on it Changes v1 -> v2: - use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FBWhy do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
It has to be selected separately in .config.
James, make sure you have DRM_FBDEV_EMULATION enabled in your kernel's .config file if you want a console. however, Weston should work without it. How do you start weston without a console?
No, it shouldn't depend on any FBDEV stuff since it's not actually required. It just happens to help in this case since weston + fbdev backend works but not weston with drm backend (or whatever config James have set).
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
It's using drm fbdev emulation with gma500 so EFIFB has nothing to do with this. I believe it was just simply incorrectly reported. If I'm correct then "depends on FB" is what makes video output work for James.
There's an fbdev backend for weston, but the provided logs don't look as if it's using this. Maybe the connector's modes are never probed correctly without fbdev.
James, could you provide a logfile for weston? (i.e., 'weston --log=weston.txt').
Best regards Thomas
-- Best regards,
Javier Martinez Canillas Linux Engineering Red Hat
On Thu, Apr 21, 2022 at 8:20 AM Thomas Zimmermann tzimmermann@suse.de wrote:
Hi
Am 21.04.22 um 14:54 schrieb Patrik Jakobsson:
On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas javierm@redhat.com wrote:
Hello Patrik,
On 4/21/22 14:39, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 1:49 PM Thomas Zimmermann tzimmermann@suse.de wrote:
Hi
Am 09.04.22 um 06:23 schrieb James Hilliard:
Select the efi framebuffer if efi is enabled.
This appears to be needed for video output to function correctly.
Signed-off-by: James Hilliard james.hilliard1@gmail.com
Changes v2 -> v3: - select EFI_FB instead of depending on it Changes v1 -> v2: - use depends instead of select
drivers/gpu/drm/gma500/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FBWhy do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
It has to be selected separately in .config.
James, make sure you have DRM_FBDEV_EMULATION enabled in your kernel's .config file if you want a console. however, Weston should work without it. How do you start weston without a console?
Well it seems to be needed for weston to work over HDMI, I'm running weston as a systemd service.
No, it shouldn't depend on any FBDEV stuff since it's not actually required. It just happens to help in this case since weston + fbdev backend works but not weston with drm backend (or whatever config James have set).
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
It's using drm fbdev emulation with gma500 so EFIFB has nothing to do with this. I believe it was just simply incorrectly reported. If I'm correct then "depends on FB" is what makes video output work for James.
There's an fbdev backend for weston, but the provided logs don't look as if it's using this. Maybe the connector's modes are never probed correctly without fbdev.
James, could you provide a logfile for weston? (i.e., 'weston --log=weston.txt').
Here's the log with output working over HDMI(DVI-D-1): Date: 2022-04-21 UTC [17:43:11.726] weston 10.0.0 https://wayland.freedesktop.org Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/ Build: 10.0.0 [17:43:11.727] Command line: /bin/weston --config=/etc/xdg/weston/weston.ini --log=/srv/weston.txt -Swayland-1 [17:43:11.727] OS: Linux, 5.17.3, #5 SMP PREEMPT Thu Apr 21 11:20:47 MDT 2022, x86_64 [17:43:11.727] Flight recorder: enabled [17:43:11.727] Using config file '/etc/xdg/weston/weston.ini' [17:43:11.727] Output repaint window is 7 ms maximum. [17:43:11.727] Loading module '/usr/lib/libweston-10/drm-backend.so' [17:43:11.743] initializing drm backend [17:43:11.743] Trying logind launcher... [17:43:11.743] logind: cannot find systemd session for uid: 0 -61 [17:43:11.743] logind: cannot setup systemd-logind helper error: (No data available), using legacy fallback [17:43:11.744] Trying weston_launch launcher... [17:43:11.744] could not get launcher fd from env [17:43:11.744] Trying direct launcher... [17:43:11.748] using /dev/dri/card0 [17:43:11.748] DRM: does not support atomic modesetting [17:43:11.748] DRM: does not support GBM modifiers [17:43:11.748] DRM: supports picture aspect ratio [17:43:11.765] event2 - Power Button: is tagged by udev as: Keyboard [17:43:11.765] event2 - Power Button: device is a keyboard [17:43:11.771] event3 - Video Bus: is tagged by udev as: Keyboard [17:43:11.772] event3 - Video Bus: device is a keyboard [17:43:11.777] event0 - Power Button: is tagged by udev as: Keyboard [17:43:11.778] event0 - Power Button: device is a keyboard [17:43:11.785] event1 - Sleep Button: is tagged by udev as: Keyboard [17:43:11.787] event1 - Sleep Button: device is a keyboard [17:43:11.799] event4 - PiKVM Composite KVM Device: is tagged by udev as: Keyboard [17:43:11.799] event4 - PiKVM Composite KVM Device: device is a keyboard [17:43:11.859] event5 - PiKVM Composite KVM Device: is tagged by udev as: Mouse [17:43:11.861] event5 - PiKVM Composite KVM Device: device is a pointer [17:43:11.891] libinput: configuring device "Power Button". [17:43:11.891] libinput: configuring device "Video Bus". [17:43:11.891] libinput: configuring device "Power Button". [17:43:11.892] libinput: configuring device "Sleep Button". [17:43:11.892] libinput: configuring device "PiKVM Composite KVM Device". [17:43:11.892] libinput: configuring device "PiKVM Composite KVM Device". [17:43:11.892] input device event5 has no enabled output associated (none named), skipping calibration for now. [17:43:11.907] DRM: head 'VGA-1' updated, connector 37 is disconnected. [17:43:11.907] DRM: head 'VGA-1' found, connector 37 is disconnected. [17:43:11.912] DRM: head 'LVDS-1' updated, connector 39 is connected, EDID make 'unknown', model 'unknown', serial 'unknown' [17:43:11.912] DRM: head 'LVDS-1' found, connector 39 is connected, EDID make 'unknown', model 'unknown', serial 'unknown' [17:43:12.336] DRM: head 'DVI-D-1' updated, connector 41 is connected, EDID make 'TSB', model 'Toshiba-H2C', serial '2290649088' [17:43:12.336] DRM: head 'DVI-D-1' found, connector 41 is connected, EDID make 'TSB', model 'Toshiba-H2C', serial '2290649088' [17:43:12.337] DRM: head 'DP-1' updated, connector 43 is disconnected. [17:43:12.337] DRM: head 'DP-1' found, connector 43 is disconnected. [17:43:12.369] DRM: head 'DVI-D-2' updated, connector 47 is disconnected. [17:43:12.369] DRM: head 'DVI-D-2' found, connector 47 is disconnected. [17:43:12.425] DRM: head 'DP-2' updated, connector 49 is connected, EDID make 'CHR', model '1024x768', serial '880' [17:43:12.425] DRM: head 'DP-2' found, connector 49 is connected, EDID make 'CHR', model '1024x768', serial '880' [17:43:12.426] Registered plugin API 'weston_drm_output_api_v1' of size 24 [17:43:12.426] Registered plugin API 'weston_drm_virtual_output_api_v1' of size 48 [17:43:12.426] Color manager: no-op [17:43:12.426] Output 'DVI-D-1' using color profile: built-in default sRGB SDR profile [17:43:12.426] DRM: output DVI-D-1 uses shadow framebuffer. [17:43:12.426] Output DVI-D-1 (crtc 32) video modes: 1280x720@60.0, preferred, current, 74.2 MHz 1920x1080@50.0 16:9, 148.5 MHz 1920x1080@30.0 16:9, 74.2 MHz 1920x1080@25.0 16:9, 74.2 MHz 1920x1080@24.0 16:9, 74.2 MHz 1280x1024@75.0, 135.0 MHz 1440x900@59.9, 106.5 MHz 1280x720@60.0 16:9, 74.2 MHz 1280x720@59.9 16:9, 74.2 MHz 1280x720@50.0 16:9, 74.2 MHz 1280x720@30.0 16:9, 74.2 MHz 1280x720@25.0 16:9, 74.2 MHz 1280x720@24.0 16:9, 59.4 MHz 1024x768@70.1, 75.0 MHz 1024x768@60.0, 65.0 MHz 800x600@75.0, 49.5 MHz 800x600@72.2, 50.0 MHz 800x600@60.3, 40.0 MHz 800x600@56.2, 36.0 MHz 720x576@50.0 16:9, 27.0 MHz 720x576@50.0 4:3, 27.0 MHz 720x480@60.0 4:3, 27.0 MHz 720x480@60.0 16:9, 27.0 MHz 720x480@59.9, 27.0 MHz 720x480@59.9, 27.0 MHz 720x480@59.9 16:9, 27.0 MHz 720x480@59.9 4:3, 27.0 MHz 640x480@75.0, 31.5 MHz 640x480@72.8, 31.5 MHz 640x480@66.7, 30.2 MHz 640x480@60.0 4:3, 25.2 MHz 640x480@59.9, 25.2 MHz 640x480@59.9 4:3, 25.2 MHz [17:43:12.427] associating input device event2 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event3 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event0 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event1 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event4 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event5 with output DVI-D-1 (none by udev) [17:43:12.428] Output 'DVI-D-1' enabled with head(s) DVI-D-1 [17:43:12.428] Compositor capabilities: arbitrary surface rotation: yes screen capture uses y-flip: no cursor planes: yes arbitrary resolutions: no view mask clipping: yes explicit sync: no color operations: no presentation clock: CLOCK_MONOTONIC, id 1 presentation clock resolution: 0.000000001 s [17:43:12.428] Loading module '/usr/lib/weston/kiosk-shell.so' [17:43:12.429] Note: support for the deprecated wl_shell interface is disabled. If a legacy client still needs it, it can be re-enabled by passing -Ddeprecated-wl-shell=true to Meson when building Weston. [17:43:12.429] Loading module '/usr/lib/weston/systemd-notify.so'
Best regards Thomas
-- Best regards,
Javier Martinez Canillas Linux Engineering Red Hat
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Ivo Totev
On Thu, Apr 21, 2022 at 7:48 PM James Hilliard james.hilliard1@gmail.com wrote:
On Thu, Apr 21, 2022 at 8:20 AM Thomas Zimmermann tzimmermann@suse.de wrote:
Hi
Am 21.04.22 um 14:54 schrieb Patrik Jakobsson:
On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas javierm@redhat.com wrote:
Hello Patrik,
On 4/21/22 14:39, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 1:49 PM Thomas Zimmermann tzimmermann@suse.de wrote:
Hi
Am 09.04.22 um 06:23 schrieb James Hilliard: > Select the efi framebuffer if efi is enabled. > > This appears to be needed for video output to function correctly. > > Signed-off-by: James Hilliard james.hilliard1@gmail.com > --- > Changes v2 -> v3: > - select EFI_FB instead of depending on it > Changes v1 -> v2: > - use depends instead of select > --- > drivers/gpu/drm/gma500/Kconfig | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig > index 0cff20265f97..a422fa84d53b 100644 > --- a/drivers/gpu/drm/gma500/Kconfig > +++ b/drivers/gpu/drm/gma500/Kconfig > @@ -2,11 +2,13 @@ > config DRM_GMA500 > tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" > depends on DRM && PCI && X86 && MMU > + depends on FB
Why do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
It has to be selected separately in .config.
James, make sure you have DRM_FBDEV_EMULATION enabled in your kernel's .config file if you want a console. however, Weston should work without it. How do you start weston without a console?
Well it seems to be needed for weston to work over HDMI, I'm running weston as a systemd service.
No, it shouldn't depend on any FBDEV stuff since it's not actually required. It just happens to help in this case since weston + fbdev backend works but not weston with drm backend (or whatever config James have set).
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
It's using drm fbdev emulation with gma500 so EFIFB has nothing to do with this. I believe it was just simply incorrectly reported. If I'm correct then "depends on FB" is what makes video output work for James.
There's an fbdev backend for weston, but the provided logs don't look as if it's using this. Maybe the connector's modes are never probed correctly without fbdev.
James, could you provide a logfile for weston? (i.e., 'weston --log=weston.txt').
Here's the log with output working over HDMI(DVI-D-1): Date: 2022-04-21 UTC [17:43:11.726] weston 10.0.0 https://wayland.freedesktop.org Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/ Build: 10.0.0 [17:43:11.727] Command line: /bin/weston --config=/etc/xdg/weston/weston.ini --log=/srv/weston.txt -Swayland-1 [17:43:11.727] OS: Linux, 5.17.3, #5 SMP PREEMPT Thu Apr 21 11:20:47 MDT 2022, x86_64 [17:43:11.727] Flight recorder: enabled [17:43:11.727] Using config file '/etc/xdg/weston/weston.ini' [17:43:11.727] Output repaint window is 7 ms maximum. [17:43:11.727] Loading module '/usr/lib/libweston-10/drm-backend.so' [17:43:11.743] initializing drm backend [17:43:11.743] Trying logind launcher... [17:43:11.743] logind: cannot find systemd session for uid: 0 -61 [17:43:11.743] logind: cannot setup systemd-logind helper error: (No data available), using legacy fallback [17:43:11.744] Trying weston_launch launcher... [17:43:11.744] could not get launcher fd from env [17:43:11.744] Trying direct launcher... [17:43:11.748] using /dev/dri/card0 [17:43:11.748] DRM: does not support atomic modesetting [17:43:11.748] DRM: does not support GBM modifiers [17:43:11.748] DRM: supports picture aspect ratio [17:43:11.765] event2 - Power Button: is tagged by udev as: Keyboard [17:43:11.765] event2 - Power Button: device is a keyboard [17:43:11.771] event3 - Video Bus: is tagged by udev as: Keyboard [17:43:11.772] event3 - Video Bus: device is a keyboard [17:43:11.777] event0 - Power Button: is tagged by udev as: Keyboard [17:43:11.778] event0 - Power Button: device is a keyboard [17:43:11.785] event1 - Sleep Button: is tagged by udev as: Keyboard [17:43:11.787] event1 - Sleep Button: device is a keyboard [17:43:11.799] event4 - PiKVM Composite KVM Device: is tagged by udev as: Keyboard [17:43:11.799] event4 - PiKVM Composite KVM Device: device is a keyboard [17:43:11.859] event5 - PiKVM Composite KVM Device: is tagged by udev as: Mouse [17:43:11.861] event5 - PiKVM Composite KVM Device: device is a pointer [17:43:11.891] libinput: configuring device "Power Button". [17:43:11.891] libinput: configuring device "Video Bus". [17:43:11.891] libinput: configuring device "Power Button". [17:43:11.892] libinput: configuring device "Sleep Button". [17:43:11.892] libinput: configuring device "PiKVM Composite KVM Device". [17:43:11.892] libinput: configuring device "PiKVM Composite KVM Device". [17:43:11.892] input device event5 has no enabled output associated (none named), skipping calibration for now. [17:43:11.907] DRM: head 'VGA-1' updated, connector 37 is disconnected. [17:43:11.907] DRM: head 'VGA-1' found, connector 37 is disconnected. [17:43:11.912] DRM: head 'LVDS-1' updated, connector 39 is connected, EDID make 'unknown', model 'unknown', serial 'unknown' [17:43:11.912] DRM: head 'LVDS-1' found, connector 39 is connected, EDID make 'unknown', model 'unknown', serial 'unknown' [17:43:12.336] DRM: head 'DVI-D-1' updated, connector 41 is connected, EDID make 'TSB', model 'Toshiba-H2C', serial '2290649088' [17:43:12.336] DRM: head 'DVI-D-1' found, connector 41 is connected, EDID make 'TSB', model 'Toshiba-H2C', serial '2290649088' [17:43:12.337] DRM: head 'DP-1' updated, connector 43 is disconnected. [17:43:12.337] DRM: head 'DP-1' found, connector 43 is disconnected. [17:43:12.369] DRM: head 'DVI-D-2' updated, connector 47 is disconnected. [17:43:12.369] DRM: head 'DVI-D-2' found, connector 47 is disconnected. [17:43:12.425] DRM: head 'DP-2' updated, connector 49 is connected, EDID make 'CHR', model '1024x768', serial '880' [17:43:12.425] DRM: head 'DP-2' found, connector 49 is connected, EDID make 'CHR', model '1024x768', serial '880' [17:43:12.426] Registered plugin API 'weston_drm_output_api_v1' of size 24 [17:43:12.426] Registered plugin API 'weston_drm_virtual_output_api_v1' of size 48 [17:43:12.426] Color manager: no-op [17:43:12.426] Output 'DVI-D-1' using color profile: built-in default sRGB SDR profile [17:43:12.426] DRM: output DVI-D-1 uses shadow framebuffer. [17:43:12.426] Output DVI-D-1 (crtc 32) video modes: 1280x720@60.0, preferred, current, 74.2 MHz 1920x1080@50.0 16:9, 148.5 MHz 1920x1080@30.0 16:9, 74.2 MHz 1920x1080@25.0 16:9, 74.2 MHz 1920x1080@24.0 16:9, 74.2 MHz 1280x1024@75.0, 135.0 MHz 1440x900@59.9, 106.5 MHz 1280x720@60.0 16:9, 74.2 MHz 1280x720@59.9 16:9, 74.2 MHz 1280x720@50.0 16:9, 74.2 MHz 1280x720@30.0 16:9, 74.2 MHz 1280x720@25.0 16:9, 74.2 MHz 1280x720@24.0 16:9, 59.4 MHz 1024x768@70.1, 75.0 MHz 1024x768@60.0, 65.0 MHz 800x600@75.0, 49.5 MHz 800x600@72.2, 50.0 MHz 800x600@60.3, 40.0 MHz 800x600@56.2, 36.0 MHz 720x576@50.0 16:9, 27.0 MHz 720x576@50.0 4:3, 27.0 MHz 720x480@60.0 4:3, 27.0 MHz 720x480@60.0 16:9, 27.0 MHz 720x480@59.9, 27.0 MHz 720x480@59.9, 27.0 MHz 720x480@59.9 16:9, 27.0 MHz 720x480@59.9 4:3, 27.0 MHz 640x480@75.0, 31.5 MHz 640x480@72.8, 31.5 MHz 640x480@66.7, 30.2 MHz 640x480@60.0 4:3, 25.2 MHz 640x480@59.9, 25.2 MHz 640x480@59.9 4:3, 25.2 MHz [17:43:12.427] associating input device event2 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event3 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event0 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event1 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event4 with output DVI-D-1 (none by udev) [17:43:12.427] associating input device event5 with output DVI-D-1 (none by udev) [17:43:12.428] Output 'DVI-D-1' enabled with head(s) DVI-D-1 [17:43:12.428] Compositor capabilities: arbitrary surface rotation: yes screen capture uses y-flip: no cursor planes: yes arbitrary resolutions: no view mask clipping: yes explicit sync: no color operations: no presentation clock: CLOCK_MONOTONIC, id 1 presentation clock resolution: 0.000000001 s [17:43:12.428] Loading module '/usr/lib/weston/kiosk-shell.so' [17:43:12.429] Note: support for the deprecated wl_shell interface is disabled. If a legacy client still needs it, it can be re-enabled by passing -Ddeprecated-wl-shell=true to Meson when building Weston. [17:43:12.429] Loading module '/usr/lib/weston/systemd-notify.so'
Ok, so my assumption that the working config was using westons fbdev backend was wrong.
Looking further at the kernel logs I can see that in the non-working case the HDMI connector gets crtc-1 instead of crtc-0. The pipe selection for the port seems correct. Not sure what is going on.
On 4/21/22 14:54, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas javierm@redhat.com wrote:
[snip]
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FBWhy do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
No, it shouldn't depend on any FBDEV stuff since it's not actually required. It just happens to help in this case since weston + fbdev backend works but not weston with drm backend (or whatever config James have set).
I see. Then the correct approach for them would be to just enable CONFIG_FB and DRM_FBDEV_EMULATION in their kernel config, rather than making this to depend on anything FB related as you said.
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
It's using drm fbdev emulation with gma500 so EFIFB has nothing to do with this. I believe it was just simply incorrectly reported. If I'm correct then "depends on FB" is what makes video output work for James.
Got it. Thanks for the clarification.
On Thu, Apr 21, 2022 at 8:22 AM Javier Martinez Canillas javierm@redhat.com wrote:
On 4/21/22 14:54, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas javierm@redhat.com wrote:
[snip]
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig index 0cff20265f97..a422fa84d53b 100644 --- a/drivers/gpu/drm/gma500/Kconfig +++ b/drivers/gpu/drm/gma500/Kconfig @@ -2,11 +2,13 @@ config DRM_GMA500 tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" depends on DRM && PCI && X86 && MMU
depends on FBWhy do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
No, it shouldn't depend on any FBDEV stuff since it's not actually required. It just happens to help in this case since weston + fbdev backend works but not weston with drm backend (or whatever config James have set).
I see. Then the correct approach for them would be to just enable CONFIG_FB and DRM_FBDEV_EMULATION in their kernel config, rather than making this to depend on anything FB related as you said.
Yeah, so it looks like CONFIG_FB_EFI is not needed but CONFIG_DRM_FBDEV_EMULATION is, I think I just assumed efifb was what was needed based on the kernel logs.
This does not work: CONFIG_FB enabled CONFIG_DRM_FBDEV_EMULATION disabled
This works: CONFIG_FB enabled CONFIG_DRM_FBDEV_EMULATION enabled
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
It's using drm fbdev emulation with gma500 so EFIFB has nothing to do with this. I believe it was just simply incorrectly reported. If I'm correct then "depends on FB" is what makes video output work for James.
Got it. Thanks for the clarification.
Here's my weston.ini: [core] shell=kiosk-shell.so modules=systemd-notify.so backend=drm-backend.so idle-time=0 require-input=false use-pixman=true
[shell] locking=false cursor-theme=Obsidian panel-position=none
[output] name=DVI-D-1 transform=rotate-270
[output] name=DP-2 mode=off
[output] name=LVDS-1 mode=off
[libinput] touchscreen_calibrator=true
-- Best regards,
Javier Martinez Canillas Linux Engineering Red Hat
Hi
Am 21.04.22 um 19:39 schrieb James Hilliard:
On Thu, Apr 21, 2022 at 8:22 AM Javier Martinez Canillas javierm@redhat.com wrote:
On 4/21/22 14:54, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas javierm@redhat.com wrote:
[snip]
> diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig > index 0cff20265f97..a422fa84d53b 100644 > --- a/drivers/gpu/drm/gma500/Kconfig > +++ b/drivers/gpu/drm/gma500/Kconfig > @@ -2,11 +2,13 @@ > config DRM_GMA500 > tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" > depends on DRM && PCI && X86 && MMU > + depends on FB
Why do we need FB here? Framebuffer support should be hidden by DRM's fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
No, it shouldn't depend on any FBDEV stuff since it's not actually required. It just happens to help in this case since weston + fbdev backend works but not weston with drm backend (or whatever config James have set).
I see. Then the correct approach for them would be to just enable CONFIG_FB and DRM_FBDEV_EMULATION in their kernel config, rather than making this to depend on anything FB related as you said.
Yeah, so it looks like CONFIG_FB_EFI is not needed but CONFIG_DRM_FBDEV_EMULATION is, I think I just assumed efifb was what was needed based on the kernel logs.
This does not work: CONFIG_FB enabled CONFIG_DRM_FBDEV_EMULATION disabled
This works: CONFIG_FB enabled CONFIG_DRM_FBDEV_EMULATION enabled
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
It's using drm fbdev emulation with gma500 so EFIFB has nothing to do with this. I believe it was just simply incorrectly reported. If I'm correct then "depends on FB" is what makes video output work for James.
Got it. Thanks for the clarification.
Here's my weston.ini: [core] shell=kiosk-shell.so modules=systemd-notify.so backend=drm-backend.so idle-time=0 require-input=false use-pixman=true
[shell] locking=false cursor-theme=Obsidian panel-position=none
[output] name=DVI-D-1 transform=rotate-270
[output] name=DP-2 mode=off
[output] name=LVDS-1 mode=off
You mentioned that you want to use HDMI, but it's not configured here. Is that intentionally?
Best regards Thomas
[libinput] touchscreen_calibrator=true
-- Best regards,
Javier Martinez Canillas Linux Engineering Red Hat
Hi
Am 21.04.22 um 20:22 schrieb Thomas Zimmermann:
Hi
Am 21.04.22 um 19:39 schrieb James Hilliard:
On Thu, Apr 21, 2022 at 8:22 AM Javier Martinez Canillas javierm@redhat.com wrote:
On 4/21/22 14:54, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas javierm@redhat.com wrote:
[snip]
>> diff --git a/drivers/gpu/drm/gma500/Kconfig >> b/drivers/gpu/drm/gma500/Kconfig >> index 0cff20265f97..a422fa84d53b 100644 >> --- a/drivers/gpu/drm/gma500/Kconfig >> +++ b/drivers/gpu/drm/gma500/Kconfig >> @@ -2,11 +2,13 @@ >> config DRM_GMA500 >> tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" >> depends on DRM && PCI && X86 && MMU >> + depends on FB > > Why do we need FB here? Framebuffer support should be hidden by > DRM's > fbdev helpers.
It is not needed but gives him video output since it enables the drm fbdev emulation.
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
No, it shouldn't depend on any FBDEV stuff since it's not actually required. It just happens to help in this case since weston + fbdev backend works but not weston with drm backend (or whatever config James have set).
I see. Then the correct approach for them would be to just enable CONFIG_FB and DRM_FBDEV_EMULATION in their kernel config, rather than making this to depend on anything FB related as you said.
Yeah, so it looks like CONFIG_FB_EFI is not needed but CONFIG_DRM_FBDEV_EMULATION is, I think I just assumed efifb was what was needed based on the kernel logs.
This does not work: CONFIG_FB enabled CONFIG_DRM_FBDEV_EMULATION disabled
This works: CONFIG_FB enabled CONFIG_DRM_FBDEV_EMULATION enabled
I looked some more at the logs and it seems weston doesn't work on his system without the fbdev backend. So the question is why weston isn't working without fbdev? Perhaps this is just a Weston configuration issue?
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
It's using drm fbdev emulation with gma500 so EFIFB has nothing to do with this. I believe it was just simply incorrectly reported. If I'm correct then "depends on FB" is what makes video output work for James.
Got it. Thanks for the clarification.
Here's my weston.ini: [core] shell=kiosk-shell.so modules=systemd-notify.so backend=drm-backend.so idle-time=0 require-input=false use-pixman=true
[shell] locking=false cursor-theme=Obsidian panel-position=none
[output] name=DVI-D-1 transform=rotate-270
[output] name=DP-2 mode=off
[output] name=LVDS-1 mode=off
You mentioned that you want to use HDMI, but it's not configured here. Is that intentionally?
Nevermind. I just saw that DVI-D-1 is the HDMI port. (why?)
Best regards Thomas
[libinput] touchscreen_calibrator=true
-- Best regards,
Javier Martinez Canillas Linux Engineering Red Hat
On Thu, Apr 21, 2022 at 1:23 PM Thomas Zimmermann tzimmermann@suse.de wrote:
Hi
Am 21.04.22 um 20:22 schrieb Thomas Zimmermann:
Hi
Am 21.04.22 um 19:39 schrieb James Hilliard:
On Thu, Apr 21, 2022 at 8:22 AM Javier Martinez Canillas javierm@redhat.com wrote:
On 4/21/22 14:54, Patrik Jakobsson wrote:
On Thu, Apr 21, 2022 at 2:47 PM Javier Martinez Canillas javierm@redhat.com wrote:
[snip]
>>> diff --git a/drivers/gpu/drm/gma500/Kconfig >>> b/drivers/gpu/drm/gma500/Kconfig >>> index 0cff20265f97..a422fa84d53b 100644 >>> --- a/drivers/gpu/drm/gma500/Kconfig >>> +++ b/drivers/gpu/drm/gma500/Kconfig >>> @@ -2,11 +2,13 @@ >>> config DRM_GMA500 >>> tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" >>> depends on DRM && PCI && X86 && MMU >>> + depends on FB >> >> Why do we need FB here? Framebuffer support should be hidden by >> DRM's >> fbdev helpers. > > It is not needed but gives him video output since it enables the drm > fbdev emulation. >
I'm not sure to understand this. Shouldn't depend on DRM_FBDEV_EMULATION then?
No, it shouldn't depend on any FBDEV stuff since it's not actually required. It just happens to help in this case since weston + fbdev backend works but not weston with drm backend (or whatever config James have set).
I see. Then the correct approach for them would be to just enable CONFIG_FB and DRM_FBDEV_EMULATION in their kernel config, rather than making this to depend on anything FB related as you said.
Yeah, so it looks like CONFIG_FB_EFI is not needed but CONFIG_DRM_FBDEV_EMULATION is, I think I just assumed efifb was what was needed based on the kernel logs.
This does not work: CONFIG_FB enabled CONFIG_DRM_FBDEV_EMULATION disabled
This works: CONFIG_FB enabled CONFIG_DRM_FBDEV_EMULATION enabled
> I looked some more at the logs and it seems weston doesn't work on > his > system without the fbdev backend. So the question is why weston isn't > working without fbdev? Perhaps this is just a Weston configuration > issue? >
But is weston using the fbdev emulated by DRM or the one registered by efifb? I thought that the latter from what was mentioned in this thread.
It's using drm fbdev emulation with gma500 so EFIFB has nothing to do with this. I believe it was just simply incorrectly reported. If I'm correct then "depends on FB" is what makes video output work for James.
Got it. Thanks for the clarification.
Here's my weston.ini: [core] shell=kiosk-shell.so modules=systemd-notify.so backend=drm-backend.so idle-time=0 require-input=false use-pixman=true
[shell] locking=false cursor-theme=Obsidian panel-position=none
[output] name=DVI-D-1 transform=rotate-270
[output] name=DP-2 mode=off
[output] name=LVDS-1 mode=off
You mentioned that you want to use HDMI, but it's not configured here. Is that intentionally?
Nevermind. I just saw that DVI-D-1 is the HDMI port. (why?)
Not sure why the HDMI output is named DVI-D-1 but that's what seems to configure it on this board.
Best regards Thomas
[libinput] touchscreen_calibrator=true
-- Best regards,
Javier Martinez Canillas Linux Engineering Red Hat
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Ivo Totev
dri-devel@lists.freedesktop.org
-
James Hilliard -
Javier Martinez Canillas -
Patrik Jakobsson -
Randy Dunlap -
Thomas Zimmermann