Rename the PM8941* references as WLED3 to make the driver generic and have WLED support for other PMICs. Also rename "i_boost_limit" and "i_limit" variables to "boost_i_limit" and "string_i_limit" respectively to resemble the corresponding register names.

Signed-off-by: Kiran Gunda kgunda@codeaurora.org Reviewed-by: Daniel Thompson daniel.thompson@linaro.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Acked-by: Pavel Machek pavel@ucw.cz --- drivers/video/backlight/qcom-wled.c | 248 ++++++++++++++++++------------------ 1 file changed, 125 insertions(+), 123 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 82b8572..f191242 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -10,77 +10,79 @@ #include <linux/regmap.h>

/* From DT binding */ -#define PM8941_WLED_DEFAULT_BRIGHTNESS 2048 +#define WLED_DEFAULT_BRIGHTNESS 2048

-#define PM8941_WLED_REG_VAL_BASE 0x40 -#define PM8941_WLED_REG_VAL_MAX 0xFFF +#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF +#define WLED3_CTRL_REG_VAL_BASE 0x40

-#define PM8941_WLED_REG_MOD_EN 0x46 -#define PM8941_WLED_REG_MOD_EN_BIT BIT(7) -#define PM8941_WLED_REG_MOD_EN_MASK BIT(7) +/* WLED3 control registers */ +#define WLED3_CTRL_REG_MOD_EN 0x46 +#define WLED3_CTRL_REG_MOD_EN_BIT BIT(7) +#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7)

-#define PM8941_WLED_REG_SYNC 0x47 -#define PM8941_WLED_REG_SYNC_MASK 0x07 -#define PM8941_WLED_REG_SYNC_LED1 BIT(0) -#define PM8941_WLED_REG_SYNC_LED2 BIT(1) -#define PM8941_WLED_REG_SYNC_LED3 BIT(2) -#define PM8941_WLED_REG_SYNC_ALL 0x07 -#define PM8941_WLED_REG_SYNC_CLEAR 0x00 +#define WLED3_CTRL_REG_FREQ 0x4c +#define WLED3_CTRL_REG_FREQ_MASK 0x0f

-#define PM8941_WLED_REG_FREQ 0x4c -#define PM8941_WLED_REG_FREQ_MASK 0x0f +#define WLED3_CTRL_REG_OVP 0x4d +#define WLED3_CTRL_REG_OVP_MASK 0x03

-#define PM8941_WLED_REG_OVP 0x4d -#define PM8941_WLED_REG_OVP_MASK 0x03 +#define WLED3_CTRL_REG_ILIMIT 0x4e +#define WLED3_CTRL_REG_ILIMIT_MASK 0x07

-#define PM8941_WLED_REG_BOOST 0x4e -#define PM8941_WLED_REG_BOOST_MASK 0x07 +/* WLED3 sink registers */ +#define WLED3_SINK_REG_SYNC 0x47 +#define WLED3_SINK_REG_SYNC_MASK 0x07 +#define WLED3_SINK_REG_SYNC_LED1 BIT(0) +#define WLED3_SINK_REG_SYNC_LED2 BIT(1) +#define WLED3_SINK_REG_SYNC_LED3 BIT(2) +#define WLED3_SINK_REG_SYNC_ALL 0x07 +#define WLED3_SINK_REG_SYNC_CLEAR 0x00

-#define PM8941_WLED_REG_SINK 0x4f -#define PM8941_WLED_REG_SINK_MASK 0xe0 -#define PM8941_WLED_REG_SINK_SHFT 0x05 +#define WLED3_SINK_REG_CURR_SINK 0x4f +#define WLED3_SINK_REG_CURR_SINK_MASK 0xe0 +#define WLED3_SINK_REG_CURR_SINK_SHFT 0x05

-/* Per-'string' registers below */ -#define PM8941_WLED_REG_STR_OFFSET 0x10 +/* WLED3 per-'string' registers below */ +#define WLED3_SINK_REG_STR_OFFSET 0x10

-#define PM8941_WLED_REG_STR_MOD_EN_BASE 0x60 -#define PM8941_WLED_REG_STR_MOD_MASK BIT(7) -#define PM8941_WLED_REG_STR_MOD_EN BIT(7) +#define WLED3_SINK_REG_STR_MOD_EN_BASE 0x60 +#define WLED3_SINK_REG_STR_MOD_MASK BIT(7) +#define WLED3_SINK_REG_STR_MOD_EN BIT(7)

-#define PM8941_WLED_REG_STR_SCALE_BASE 0x62 -#define PM8941_WLED_REG_STR_SCALE_MASK 0x1f +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR 0x62 +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK 0x1f

-#define PM8941_WLED_REG_STR_MOD_SRC_BASE 0x63 -#define PM8941_WLED_REG_STR_MOD_SRC_MASK 0x01 -#define PM8941_WLED_REG_STR_MOD_SRC_INT 0x00 -#define PM8941_WLED_REG_STR_MOD_SRC_EXT 0x01 +#define WLED3_SINK_REG_STR_MOD_SRC_BASE 0x63 +#define WLED3_SINK_REG_STR_MOD_SRC_MASK 0x01 +#define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 +#define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01

-#define PM8941_WLED_REG_STR_CABC_BASE 0x66 -#define PM8941_WLED_REG_STR_CABC_MASK BIT(7) -#define PM8941_WLED_REG_STR_CABC_EN BIT(7) +#define WLED3_SINK_REG_STR_CABC_BASE 0x66 +#define WLED3_SINK_REG_STR_CABC_MASK BIT(7) +#define WLED3_SINK_REG_STR_CABC_EN BIT(7)

-struct pm8941_wled_config { - u32 i_boost_limit; +struct wled_config { + u32 boost_i_limit; u32 ovp; u32 switch_freq; u32 num_strings; - u32 i_limit; + u32 string_i_limit; bool cs_out_en; bool ext_gen; bool cabc_en; };

-struct pm8941_wled { +struct wled { const char *name; struct regmap *regmap; u16 addr;

- struct pm8941_wled_config cfg; + struct wled_config cfg; };

-static int pm8941_wled_update_status(struct backlight_device *bl) +static int wled_update_status(struct backlight_device *bl) { - struct pm8941_wled *wled = bl_get_data(bl); + struct wled *wled = bl_get_data(bl); u16 val = bl->props.brightness; u8 ctrl = 0; int rc; @@ -92,11 +94,11 @@ static int pm8941_wled_update_status(struct backlight_device *bl) val = 0;

if (val != 0) - ctrl = PM8941_WLED_REG_MOD_EN_BIT; + ctrl = WLED3_CTRL_REG_MOD_EN_BIT;

rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_MOD_EN, - PM8941_WLED_REG_MOD_EN_MASK, ctrl); + wled->addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, ctrl); if (rc) return rc;

@@ -104,89 +106,89 @@ static int pm8941_wled_update_status(struct backlight_device *bl) u8 v[2] = { val & 0xff, (val >> 8) & 0xf };

rc = regmap_bulk_write(wled->regmap, - wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i, + wled->addr + WLED3_CTRL_REG_VAL_BASE + 2 * i, v, 2); if (rc) return rc; }

rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_SYNC, - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL); + wled->addr + WLED3_SINK_REG_SYNC, + WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_ALL); if (rc) return rc;

rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_SYNC, - PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR); + wled->addr + WLED3_SINK_REG_SYNC, + WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_CLEAR); return rc; }

-static int pm8941_wled_setup(struct pm8941_wled *wled) +static int wled_setup(struct wled *wled) { int rc; int i;

rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_OVP, - PM8941_WLED_REG_OVP_MASK, wled->cfg.ovp); + wled->addr + WLED3_CTRL_REG_OVP, + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); if (rc) return rc;

rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_BOOST, - PM8941_WLED_REG_BOOST_MASK, wled->cfg.i_boost_limit); + wled->addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, wled->cfg.boost_i_limit); if (rc) return rc;

rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_FREQ, - PM8941_WLED_REG_FREQ_MASK, wled->cfg.switch_freq); + wled->addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, wled->cfg.switch_freq); if (rc) return rc;

if (wled->cfg.cs_out_en) { u8 all = (BIT(wled->cfg.num_strings) - 1) - << PM8941_WLED_REG_SINK_SHFT; + << WLED3_SINK_REG_CURR_SINK_SHFT;

rc = regmap_update_bits(wled->regmap, - wled->addr + PM8941_WLED_REG_SINK, - PM8941_WLED_REG_SINK_MASK, all); + wled->addr + WLED3_SINK_REG_CURR_SINK, + WLED3_SINK_REG_CURR_SINK_MASK, all); if (rc) return rc; }

for (i = 0; i < wled->cfg.num_strings; ++i) { - u16 addr = wled->addr + PM8941_WLED_REG_STR_OFFSET * i; + u16 addr = wled->addr + WLED3_SINK_REG_STR_OFFSET * i;

rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_MOD_EN_BASE, - PM8941_WLED_REG_STR_MOD_MASK, - PM8941_WLED_REG_STR_MOD_EN); + addr + WLED3_SINK_REG_STR_MOD_EN_BASE, + WLED3_SINK_REG_STR_MOD_MASK, + WLED3_SINK_REG_STR_MOD_EN); if (rc) return rc;

if (wled->cfg.ext_gen) { rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_MOD_SRC_BASE, - PM8941_WLED_REG_STR_MOD_SRC_MASK, - PM8941_WLED_REG_STR_MOD_SRC_EXT); + addr + WLED3_SINK_REG_STR_MOD_SRC_BASE, + WLED3_SINK_REG_STR_MOD_SRC_MASK, + WLED3_SINK_REG_STR_MOD_SRC_EXT); if (rc) return rc; }

rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_SCALE_BASE, - PM8941_WLED_REG_STR_SCALE_MASK, - wled->cfg.i_limit); + addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR, + WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); if (rc) return rc;

rc = regmap_update_bits(wled->regmap, - addr + PM8941_WLED_REG_STR_CABC_BASE, - PM8941_WLED_REG_STR_CABC_MASK, + addr + WLED3_SINK_REG_STR_CABC_BASE, + WLED3_SINK_REG_STR_CABC_MASK, wled->cfg.cabc_en ? - PM8941_WLED_REG_STR_CABC_EN : 0); + WLED3_SINK_REG_STR_CABC_EN : 0); if (rc) return rc; } @@ -194,9 +196,9 @@ static int pm8941_wled_setup(struct pm8941_wled *wled) return 0; }

-static const struct pm8941_wled_config pm8941_wled_config_defaults = { - .i_boost_limit = 3, - .i_limit = 20, +static const struct wled_config wled3_config_defaults = { + .boost_i_limit = 3, + .string_i_limit = 20, .ovp = 2, .switch_freq = 5, .num_strings = 0, @@ -205,55 +207,55 @@ static int pm8941_wled_setup(struct pm8941_wled *wled) .cabc_en = false, };

-struct pm8941_wled_var_cfg { +struct wled_var_cfg { const u32 *values; u32 (*fn)(u32); int size; };

-static const u32 pm8941_wled_i_boost_limit_values[] = { +static const u32 wled3_boost_i_limit_values[] = { 105, 385, 525, 805, 980, 1260, 1400, 1680, };

-static const struct pm8941_wled_var_cfg pm8941_wled_i_boost_limit_cfg = { - .values = pm8941_wled_i_boost_limit_values, - .size = ARRAY_SIZE(pm8941_wled_i_boost_limit_values), +static const struct wled_var_cfg wled3_boost_i_limit_cfg = { + .values = wled3_boost_i_limit_values, + .size = ARRAY_SIZE(wled3_boost_i_limit_values), };

-static const u32 pm8941_wled_ovp_values[] = { +static const u32 wled3_ovp_values[] = { 35, 32, 29, 27, };

-static const struct pm8941_wled_var_cfg pm8941_wled_ovp_cfg = { - .values = pm8941_wled_ovp_values, - .size = ARRAY_SIZE(pm8941_wled_ovp_values), +static const struct wled_var_cfg wled3_ovp_cfg = { + .values = wled3_ovp_values, + .size = ARRAY_SIZE(wled3_ovp_values), };

-static u32 pm8941_wled_num_strings_values_fn(u32 idx) +static u32 wled3_num_strings_values_fn(u32 idx) { return idx + 1; }

-static const struct pm8941_wled_var_cfg pm8941_wled_num_strings_cfg = { - .fn = pm8941_wled_num_strings_values_fn, +static const struct wled_var_cfg wled3_num_strings_cfg = { + .fn = wled3_num_strings_values_fn, .size = 3, };

-static u32 pm8941_wled_switch_freq_values_fn(u32 idx) +static u32 wled3_switch_freq_values_fn(u32 idx) { return 19200 / (2 * (1 + idx)); }

-static const struct pm8941_wled_var_cfg pm8941_wled_switch_freq_cfg = { - .fn = pm8941_wled_switch_freq_values_fn, +static const struct wled_var_cfg wled3_switch_freq_cfg = { + .fn = wled3_switch_freq_values_fn, .size = 16, };

-static const struct pm8941_wled_var_cfg pm8941_wled_i_limit_cfg = { +static const struct wled_var_cfg wled3_string_i_limit_cfg = { .size = 26, };

-static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx) +static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx) { if (idx >= cfg->size) return UINT_MAX; @@ -264,9 +266,9 @@ static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx) return idx; }

-static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) +static int wled_configure(struct wled *wled, struct device *dev) { - struct pm8941_wled_config *cfg = &wled->cfg; + struct wled_config *cfg = &wled->cfg; u32 val; int rc; u32 c; @@ -276,32 +278,32 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) const struct { const char *name; u32 *val_ptr; - const struct pm8941_wled_var_cfg *cfg; + const struct wled_var_cfg *cfg; } u32_opts[] = { { "qcom,current-boost-limit", - &cfg->i_boost_limit, - .cfg = &pm8941_wled_i_boost_limit_cfg, + &cfg->boost_i_limit, + .cfg = &wled3_boost_i_limit_cfg, }, { "qcom,current-limit", - &cfg->i_limit, - .cfg = &pm8941_wled_i_limit_cfg, + &cfg->string_i_limit, + .cfg = &wled3_string_i_limit_cfg, }, { "qcom,ovp", &cfg->ovp, - .cfg = &pm8941_wled_ovp_cfg, + .cfg = &wled3_ovp_cfg, }, { "qcom,switching-freq", &cfg->switch_freq, - .cfg = &pm8941_wled_switch_freq_cfg, + .cfg = &wled3_switch_freq_cfg, }, { "qcom,num-strings", &cfg->num_strings, - .cfg = &pm8941_wled_num_strings_cfg, + .cfg = &wled3_num_strings_cfg, }, }; const struct { @@ -324,7 +326,7 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) if (rc) wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node);

- *cfg = pm8941_wled_config_defaults; + *cfg = wled3_config_defaults; for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) { rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); if (rc == -EINVAL) { @@ -336,7 +338,7 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev)

c = UINT_MAX; for (j = 0; c != val; j++) { - c = pm8941_wled_values(u32_opts[i].cfg, j); + c = wled3_values(u32_opts[i].cfg, j); if (c == UINT_MAX) { dev_err(dev, "invalid value for '%s'\n", u32_opts[i].name); @@ -358,15 +360,15 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev) return 0; }

-static const struct backlight_ops pm8941_wled_ops = { - .update_status = pm8941_wled_update_status, +static const struct backlight_ops wled_ops = { + .update_status = wled_update_status, };

-static int pm8941_wled_probe(struct platform_device *pdev) +static int wled_probe(struct platform_device *pdev) { struct backlight_properties props; struct backlight_device *bl; - struct pm8941_wled *wled; + struct wled *wled; struct regmap *regmap; u32 val; int rc; @@ -383,42 +385,42 @@ static int pm8941_wled_probe(struct platform_device *pdev)

wled->regmap = regmap;

- rc = pm8941_wled_configure(wled, &pdev->dev); + rc = wled_configure(wled, &pdev->dev); if (rc) return rc;

- rc = pm8941_wled_setup(wled); + rc = wled_setup(wled); if (rc) return rc;

- val = PM8941_WLED_DEFAULT_BRIGHTNESS; + val = WLED_DEFAULT_BRIGHTNESS; of_property_read_u32(pdev->dev.of_node, "default-brightness", &val);

memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_RAW; props.brightness = val; - props.max_brightness = PM8941_WLED_REG_VAL_MAX; + props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX; bl = devm_backlight_device_register(&pdev->dev, wled->name, &pdev->dev, wled, - &pm8941_wled_ops, &props); + &wled_ops, &props); return PTR_ERR_OR_ZERO(bl); };

-static const struct of_device_id pm8941_wled_match_table[] = { +static const struct of_device_id wled_match_table[] = { { .compatible = "qcom,pm8941-wled" }, {} }; -MODULE_DEVICE_TABLE(of, pm8941_wled_match_table); +MODULE_DEVICE_TABLE(of, wled_match_table);

-static struct platform_driver pm8941_wled_driver = { - .probe = pm8941_wled_probe, +static struct platform_driver wled_driver = { + .probe = wled_probe, .driver = { - .name = "pm8941-wled", - .of_match_table = pm8941_wled_match_table, + .name = "qcom,wled", + .of_match_table = wled_match_table, }, };

-module_platform_driver(pm8941_wled_driver); +module_platform_driver(wled_driver);

-MODULE_DESCRIPTION("pm8941 wled driver"); +MODULE_DESCRIPTION("Qualcomm WLED driver"); MODULE_LICENSE("GPL v2");

WLED4 peripheral is present on some PMICs like pmi8998 and pm660l. It has a different register map and configurations are also different. Add support for it.

Signed-off-by: Kiran Gunda kgunda@codeaurora.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org --- drivers/video/backlight/qcom-wled.c | 255 +++++++++++++++++++++++++++++++++++- 1 file changed, 253 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 45eeda4..5386ca9 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -17,7 +17,7 @@

#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF

-/* WLED3 control registers */ +/* WLED3/WLED4 control registers */ #define WLED3_CTRL_REG_MOD_EN 0x46 #define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) #define WLED3_CTRL_REG_MOD_EN_SHIFT 7 @@ -31,7 +31,7 @@ #define WLED3_CTRL_REG_ILIMIT 0x4e #define WLED3_CTRL_REG_ILIMIT_MASK GENMASK(2, 0)

-/* WLED3 sink registers */ +/* WLED3/WLED4 sink registers */ #define WLED3_SINK_REG_SYNC 0x47 #define WLED3_SINK_REG_SYNC_CLEAR 0x00

@@ -56,6 +56,28 @@ #define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10)) #define WLED3_SINK_REG_STR_CABC_MASK BIT(7)

+/* WLED4 specific sink registers */ +#define WLED4_SINK_REG_CURR_SINK 0x46 +#define WLED4_SINK_REG_CURR_SINK_MASK GENMASK(7, 4) +#define WLED4_SINK_REG_CURR_SINK_SHFT 4 + +/* WLED4 specific per-'string' registers below */ +#define WLED4_SINK_REG_STR_MOD_EN(n) (0x50 + (n * 0x10)) +#define WLED4_SINK_REG_STR_MOD_MASK BIT(7) + +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n) (0x52 + (n * 0x10)) +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(3, 0) + +#define WLED4_SINK_REG_STR_MOD_SRC(n) (0x53 + (n * 0x10)) +#define WLED4_SINK_REG_STR_MOD_SRC_MASK BIT(0) +#define WLED4_SINK_REG_STR_MOD_SRC_INT 0x00 +#define WLED4_SINK_REG_STR_MOD_SRC_EXT 0x01 + +#define WLED4_SINK_REG_STR_CABC(n) (0x56 + (n * 0x10)) +#define WLED4_SINK_REG_STR_CABC_MASK BIT(7) + +#define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10)) + struct wled_var_cfg { const u32 *values; u32 (*fn)(u32); @@ -90,6 +112,7 @@ struct wled { struct device *dev; struct regmap *regmap; u16 ctrl_addr; + u16 sink_addr; u16 max_string_count; u32 brightness; u32 max_brightness; @@ -116,6 +139,29 @@ static int wled3_set_brightness(struct wled *wled, u16 brightness) return 0; }

+static int wled4_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, i; + u16 low_limit = wled->max_brightness * 4 / 1000; + u8 v[2]; + + /* WLED4's lower limit of operation is 0.4% */ + if (brightness > 0 && brightness < low_limit) + brightness = low_limit; + + v[0] = brightness & 0xff; + v[1] = (brightness >> 8) & 0xf; + + for (i = 0; i < wled->cfg.num_strings; ++i) { + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_BRIGHT(i), v, 2); + if (rc < 0) + return rc; + } + + return 0; +} + static int wled_module_enable(struct wled *wled, int val) { int rc; @@ -267,6 +313,120 @@ static int wled3_setup(struct wled *wled) .enabled_strings = {0, 1, 2, 3}, };

+static int wled4_setup(struct wled *wled) +{ + int rc, temp, i, j; + u16 addr; + u8 sink_en = 0; + u32 sink_cfg = 0; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc < 0) + return rc; + + rc = regmap_read(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, &sink_cfg); + if (rc < 0) + return rc; + + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; + sink_en |= 1 << temp; + } + + if (sink_cfg == sink_en) + return 0; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, 0); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) + return rc; + + /* Per sink/string configuration */ + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_MOD_EN(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_MOD_MASK, + WLED4_SINK_REG_STR_MOD_MASK); + if (rc < 0) + return rc; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc < 0) + return rc; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_CABC(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_CABC_MASK, + wled->cfg.cabc ? + WLED4_SINK_REG_STR_CABC_MASK : 0); + if (rc < 0) + return rc; + } + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + WLED3_CTRL_REG_MOD_EN_MASK); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc < 0) + return rc; + + rc = wled_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc); + return rc; + } + + return 0; +} + +static const struct wled_config wled4_config_defaults = { + .boost_i_limit = 4, + .string_i_limit = 10, + .ovp = 1, + .num_strings = 4, + .switch_freq = 11, + .cabc = false, +}; + static const u32 wled3_boost_i_limit_values[] = { 105, 385, 525, 805, 980, 1260, 1400, 1680, }; @@ -276,6 +436,15 @@ static int wled3_setup(struct wled *wled) .size = ARRAY_SIZE(wled3_boost_i_limit_values), };

+static const u32 wled4_boost_i_limit_values[] = { + 105, 280, 450, 620, 970, 1150, 1300, 1500, +}; + +static const struct wled_var_cfg wled4_boost_i_limit_cfg = { + .values = wled4_boost_i_limit_values, + .size = ARRAY_SIZE(wled4_boost_i_limit_values), +}; + static const u32 wled3_ovp_values[] = { 35, 32, 29, 27, }; @@ -285,6 +454,15 @@ static int wled3_setup(struct wled *wled) .size = ARRAY_SIZE(wled3_ovp_values), };

+static const u32 wled4_ovp_values[] = { + 31100, 29600, 19600, 18100, +}; + +static const struct wled_var_cfg wled4_ovp_cfg = { + .values = wled4_ovp_values, + .size = ARRAY_SIZE(wled4_ovp_values), +}; + static u32 wled3_num_strings_values_fn(u32 idx) { return idx + 1; @@ -295,6 +473,11 @@ static u32 wled3_num_strings_values_fn(u32 idx) .size = 3, };

+static const struct wled_var_cfg wled4_num_strings_cfg = { + .fn = wled3_num_strings_values_fn, + .size = 4, +}; + static u32 wled3_switch_freq_values_fn(u32 idx) { return 19200 / (2 * (1 + idx)); @@ -309,10 +492,24 @@ static u32 wled3_switch_freq_values_fn(u32 idx) .size = 26, };

+static const u32 wled4_string_i_limit_values[] = { + 0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000, + 22500, 25000, 27500, 30000, +}; + +static const struct wled_var_cfg wled4_string_i_limit_cfg = { + .values = wled4_string_i_limit_values, + .size = ARRAY_SIZE(wled4_string_i_limit_values), +}; + static const struct wled_var_cfg wled3_string_cfg = { .size = 8, };

+static const struct wled_var_cfg wled4_string_cfg = { + .size = 16, +}; + static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) { if (idx >= cfg->size) @@ -361,6 +558,34 @@ static int wled_configure(struct wled *wled, int version) }, };

+ const struct wled_u32_opts wled4_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled4_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit-microamp", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled4_string_i_limit_cfg, + }, + { + .name = "qcom,ovp-millivolt", + .val_ptr = &cfg->ovp, + .cfg = &wled4_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + { + .name = "qcom,num-strings", + .val_ptr = &cfg->num_strings, + .cfg = &wled4_num_strings_cfg, + }, + }; + const struct wled_bool_opts bool_opts[] = { { "qcom,cs-out", &cfg->cs_out_en, }, { "qcom,ext-gen", &cfg->ext_gen, }, @@ -385,6 +610,22 @@ static int wled_configure(struct wled *wled, int version) *cfg = wled3_config_defaults; wled->wled_set_brightness = wled3_set_brightness; wled->max_string_count = 3; + wled->sink_addr = wled->ctrl_addr; + break; + + case 4: + u32_opts = wled4_opts; + size = ARRAY_SIZE(wled4_opts); + *cfg = wled4_config_defaults; + wled->wled_set_brightness = wled4_set_brightness; + wled->max_string_count = 4; + + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->sink_addr = be32_to_cpu(*prop_addr); break;

default: @@ -483,6 +724,14 @@ static int wled_probe(struct platform_device *pdev) } break;

+ case 4: + rc = wled4_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled4_setup failed\n"); + return rc; + } + break; + default: dev_err(wled->dev, "Invalid WLED version\n"); break; @@ -503,6 +752,8 @@ static int wled_probe(struct platform_device *pdev)

static const struct of_device_id wled_match_table[] = { { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, + { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, + { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, {} }; MODULE_DEVICE_TABLE(of, wled_match_table);

The auto string detection algorithm checks if the current WLED sink configuration is valid. It tries enabling every sink and checks if the OVP fault is observed. Based on this information it detects and enables the valid sink configuration. Auto calibration will be triggered when the OVP fault interrupts are seen frequently thereby it tries to fix the sink configuration.

The auto-detection also kicks in when the connected LED string of the display-backlight malfunctions (because of damage) and requires the damaged string to be turned off to prevent the complete panel and/or board from being damaged.

Signed-off-by: Kiran Gunda kgunda@codeaurora.org --- drivers/video/backlight/qcom-wled.c | 398 +++++++++++++++++++++++++++++++++++- 1 file changed, 392 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 658b1e0..b2e6754 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -17,19 +17,29 @@ #define WLED_MAX_STRINGS 4

#define WLED_DEFAULT_BRIGHTNESS 2048 - +#define WLED_SOFT_START_DLY_US 10000 #define WLED3_SINK_REG_BRIGHT_MAX 0xFFF

/* WLED3/WLED4 control registers */ +#define WLED3_CTRL_REG_FAULT_STATUS 0x08 +#define WLED3_CTRL_REG_ILIM_FAULT_BIT BIT(0) +#define WLED3_CTRL_REG_OVP_FAULT_BIT BIT(1) +#define WLED4_CTRL_REG_SC_FAULT_BIT BIT(2) + +#define WLED3_CTRL_REG_INT_RT_STS 0x10 +#define WLED3_CTRL_REG_OVP_FAULT_STATUS BIT(1) + #define WLED3_CTRL_REG_MOD_EN 0x46 #define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) #define WLED3_CTRL_REG_MOD_EN_SHIFT 7

+#define WLED3_CTRL_REG_FEEDBACK_CONTROL 0x48 + #define WLED3_CTRL_REG_FREQ 0x4c #define WLED3_CTRL_REG_FREQ_MASK GENMASK(3, 0)

#define WLED3_CTRL_REG_OVP 0x4d -#define WLED3_CTRL_REG_OVP_MASK GENMASK(1, 0) +#define WLED3_CTRL_REG_OVP_MASK GENMASK(1, 0)

#define WLED3_CTRL_REG_ILIMIT 0x4e #define WLED3_CTRL_REG_ILIMIT_MASK GENMASK(2, 0) @@ -119,6 +129,7 @@ struct wled_config { bool ext_gen; bool cabc; bool external_pfet; + bool auto_detection_enabled; };

struct wled { @@ -127,17 +138,22 @@ struct wled { struct regmap *regmap; struct mutex lock; /* Lock to avoid race from thread irq handler */ ktime_t last_short_event; + ktime_t start_ovp_fault_time; u16 ctrl_addr; u16 sink_addr; u16 max_string_count; + u16 auto_detection_ovp_count; u32 brightness; u32 max_brightness; u32 short_count; + u32 auto_detect_count; bool disabled_by_short; bool has_short_detect; int short_irq; + int ovp_irq;

struct wled_config cfg; + struct delayed_work ovp_work; int (*wled_set_brightness)(struct wled *wled, u16 brightness); };

@@ -182,6 +198,13 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness) return 0; }

+static void wled_ovp_work(struct work_struct *work) +{ + struct wled *wled = container_of(work, + struct wled, ovp_work.work); + enable_irq(wled->ovp_irq); +} + static int wled_module_enable(struct wled *wled, int val) { int rc; @@ -193,7 +216,23 @@ static int wled_module_enable(struct wled *wled, int val) WLED3_CTRL_REG_MOD_EN, WLED3_CTRL_REG_MOD_EN_MASK, val << WLED3_CTRL_REG_MOD_EN_SHIFT); - return rc; + if (rc < 0) + return rc; + + if (wled->ovp_irq > 0) { + if (val) { + /* + * Wait for at least 10ms before enabling OVP interrupt + * after module enable so that soft start is completed. + */ + schedule_delayed_work(&wled->ovp_work, HZ / 100); + } else { + if (!cancel_delayed_work_sync(&wled->ovp_work)) + disable_irq(wled->ovp_irq); + } + } + + return 0; }

static int wled_sync_toggle(struct wled *wled) @@ -300,6 +339,304 @@ static irqreturn_t wled_short_irq_handler(int irq, void *_wled) return IRQ_HANDLED; }

+#define AUTO_DETECT_BRIGHTNESS 200 + +static void wled_auto_string_detection(struct wled *wled) +{ + int rc = 0, i; + u32 sink_config = 0, int_sts; + u8 sink_test = 0, sink_valid = 0, val; + + /* Read configured sink configuration */ + rc = regmap_read(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, &sink_config); + if (rc < 0) { + dev_err(wled->dev, "Failed to read SINK configuration rc=%d\n", + rc); + goto failed_detect; + } + + /* Disable the module before starting detection */ + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to disable WLED module rc=%d\n", rc); + goto failed_detect; + } + + /* Set low brightness across all sinks */ + rc = wled4_set_brightness(wled, AUTO_DETECT_BRIGHTNESS); + if (rc < 0) { + dev_err(wled->dev, "Failed to set brightness for auto detection rc=%d\n", + rc); + goto failed_detect; + } + + if (wled->cfg.cabc) { + for (i = 0; i < wled->cfg.num_strings; i++) { + rc = regmap_update_bits(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_CABC(i), + WLED4_SINK_REG_STR_CABC_MASK, + 0); + if (rc < 0) + goto failed_detect; + } + } + + /* Disable all sinks */ + rc = regmap_write(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to disable all sinks rc=%d\n", rc); + goto failed_detect; + } + + /* Iterate through the strings one by one */ + for (i = 0; i < wled->cfg.num_strings; i++) { + sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + i)); + + /* Enable feedback control */ + rc = regmap_write(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_FEEDBACK_CONTROL, i + 1); + if (rc < 0) { + dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n", + i + 1, rc); + goto failed_detect; + } + + /* Enable the sink */ + rc = regmap_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, sink_test); + if (rc < 0) { + dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n", + i + 1, rc); + goto failed_detect; + } + + /* Enable the module */ + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + WLED3_CTRL_REG_MOD_EN_MASK); + if (rc < 0) { + dev_err(wled->dev, "Failed to enable WLED module rc=%d\n", + rc); + goto failed_detect; + } + + usleep_range(WLED_SOFT_START_DLY_US, + WLED_SOFT_START_DLY_US + 1000); + + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_INT_RT_STS, &int_sts); + if (rc < 0) { + dev_err(wled->dev, "Error in reading WLED3_CTRL_INT_RT_STS rc=%d\n", + rc); + goto failed_detect; + } + + if (int_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS) + dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n", + i + 1); + else + sink_valid |= sink_test; + + /* Disable the module */ + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to disable WLED module rc=%d\n", + rc); + goto failed_detect; + } + } + + if (!sink_valid) { + dev_err(wled->dev, "No valid WLED sinks found\n"); + wled->disabled_by_short = true; + goto failed_detect; + } + + if (sink_valid != sink_config) { + dev_warn(wled->dev, "%x is not a valid sink configuration - using %x instead\n", + sink_config, sink_valid); + sink_config = sink_valid; + } + + /* Write the new sink configuration */ + rc = regmap_write(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + sink_config); + if (rc < 0) { + dev_err(wled->dev, "Failed to reconfigure the default sink rc=%d\n", + rc); + goto failed_detect; + } + + /* Enable valid sinks */ + for (i = 0; i < wled->cfg.num_strings; i++) { + if (wled->cfg.cabc) { + rc = regmap_update_bits(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_CABC(i), + WLED4_SINK_REG_STR_CABC_MASK, + WLED4_SINK_REG_STR_CABC_MASK); + if (rc < 0) + goto failed_detect; + } + + if (sink_config & BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i)) + val = WLED4_SINK_REG_STR_MOD_MASK; + else + val = 0x0; /* Disable modulator_en for unused sink */ + + rc = regmap_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_MOD_EN(i), val); + if (rc < 0) { + dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n", + rc); + goto failed_detect; + } + } + + /* Restore the feedback setting */ + rc = regmap_write(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FEEDBACK_CONTROL, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to restore feedback setting rc=%d\n", + rc); + goto failed_detect; + } + + /* Restore brightness */ + rc = wled4_set_brightness(wled, wled->brightness); + if (rc < 0) { + dev_err(wled->dev, "Failed to set brightness after auto detection rc=%d\n", + rc); + goto failed_detect; + } + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + WLED3_CTRL_REG_MOD_EN_MASK); + if (rc < 0) { + dev_err(wled->dev, "Failed to enable WLED module rc=%d\n", rc); + goto failed_detect; + } + +failed_detect: + return; +} + +#define WLED_AUTO_DETECT_OVP_COUNT 5 +#define WLED_AUTO_DETECT_CNT_DLY_US USEC_PER_SEC +static bool wled_auto_detection_required(struct wled *wled) +{ + s64 elapsed_time_us; + + if (!wled->cfg.auto_detection_enabled) + return false; + + /* + * Check if the OVP fault was an occasional one + * or if it's firing continuously, the latter qualifies + * for an auto-detection check. + */ + if (!wled->auto_detection_ovp_count) { + wled->start_ovp_fault_time = ktime_get(); + wled->auto_detection_ovp_count++; + } else { + elapsed_time_us = ktime_us_delta(ktime_get(), + wled->start_ovp_fault_time); + if (elapsed_time_us > WLED_AUTO_DETECT_CNT_DLY_US) + wled->auto_detection_ovp_count = 0; + else + wled->auto_detection_ovp_count++; + + if (wled->auto_detection_ovp_count >= + WLED_AUTO_DETECT_OVP_COUNT) { + wled->auto_detection_ovp_count = 0; + return true; + } + } + + return false; +} + +static int wled_auto_detection_at_init(struct wled *wled) +{ + int rc; + u32 fault_status, rt_status; + + if (!wled->cfg.auto_detection_enabled) + return 0; + + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, + &rt_status); + if (rc < 0) { + dev_err(wled->dev, "Failed to read RT status rc=%d\n", rc); + return rc; + } + + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS, + &fault_status); + if (rc < 0) { + dev_err(wled->dev, "Failed to read fault status rc=%d\n", rc); + return rc; + } + + if ((rt_status & WLED3_CTRL_REG_OVP_FAULT_STATUS) || + (fault_status & WLED3_CTRL_REG_OVP_FAULT_BIT)) { + mutex_lock(&wled->lock); + wled_auto_string_detection(wled); + mutex_unlock(&wled->lock); + } + + return rc; +} + +static irqreturn_t wled_ovp_irq_handler(int irq, void *_wled) +{ + struct wled *wled = _wled; + int rc; + u32 int_sts, fault_sts; + + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, &int_sts); + if (rc < 0) { + dev_err(wled->dev, "Error in reading WLED3_INT_RT_STS rc=%d\n", + rc); + return IRQ_HANDLED; + } + + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_FAULT_STATUS, &fault_sts); + if (rc < 0) { + dev_err(wled->dev, "Error in reading WLED_FAULT_STATUS rc=%d\n", + rc); + return IRQ_HANDLED; + } + + if (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT | + WLED3_CTRL_REG_ILIM_FAULT_BIT)) + dev_dbg(wled->dev, "WLED OVP fault detected, int_sts=%x fault_sts= %x\n", + int_sts, fault_sts); + + if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) { + if (wled_auto_detection_required(wled)) { + mutex_lock(&wled->lock); + wled_auto_string_detection(wled); + mutex_unlock(&wled->lock); + } + } + + return IRQ_HANDLED; +} + static int wled3_setup(struct wled *wled) { u16 addr; @@ -436,8 +773,10 @@ static int wled4_setup(struct wled *wled) sink_en |= 1 << temp; }

- if (sink_cfg == sink_en) - return 0; + if (sink_cfg == sink_en) { + rc = wled_auto_detection_at_init(wled); + return rc; + }

rc = regmap_update_bits(wled->regmap, wled->sink_addr + WLED4_SINK_REG_CURR_SINK, @@ -500,7 +839,9 @@ static int wled4_setup(struct wled *wled) return rc; }

- return 0; + rc = wled_auto_detection_at_init(wled); + + return rc; }

static const struct wled_config wled4_config_defaults = { @@ -511,6 +852,7 @@ static int wled4_setup(struct wled *wled) .switch_freq = 11, .cabc = false, .external_pfet = false, + .auto_detection_enabled = false, };

static const u32 wled3_boost_i_limit_values[] = { @@ -677,6 +1019,7 @@ static int wled_configure(struct wled *wled, int version) { "qcom,ext-gen", &cfg->ext_gen, }, { "qcom,cabc", &cfg->cabc, }, { "qcom,external-pfet", &cfg->external_pfet, }, + { "qcom,auto-string-detection", &cfg->auto_detection_enabled, }, };

prop_addr = of_get_address(dev->of_node, 0, NULL, NULL); @@ -797,6 +1140,40 @@ static int wled_configure_short_irq(struct wled *wled, return rc; }

+static int wled_configure_ovp_irq(struct wled *wled, + struct platform_device *pdev) +{ + int rc; + u32 val; + + wled->ovp_irq = platform_get_irq_byname(pdev, "ovp"); + if (wled->ovp_irq < 0) { + dev_dbg(&pdev->dev, "OVP IRQ not found - disabling automatic string detection\n"); + return 0; + } + + rc = devm_request_threaded_irq(wled->dev, wled->ovp_irq, NULL, + wled_ovp_irq_handler, IRQF_ONESHOT, + "wled_ovp_irq", wled); + if (rc < 0) { + dev_err(wled->dev, "Unable to request ovp_irq (err:%d)\n", + rc); + wled->ovp_irq = 0; + return 0; + } + + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, &val); + if (rc < 0) + return rc; + + /* Keep OVP irq disabled until module is enabled */ + if (!(val & WLED3_CTRL_REG_MOD_EN_MASK)) + disable_irq(wled->ovp_irq); + + return 0; +} + static const struct backlight_ops wled_ops = { .update_status = wled_update_status, }; @@ -837,6 +1214,7 @@ static int wled_probe(struct platform_device *pdev)

switch (version) { case 3: + wled->cfg.auto_detection_enabled = false; rc = wled3_setup(wled); if (rc) { dev_err(&pdev->dev, "wled3_setup failed\n"); @@ -858,10 +1236,16 @@ static int wled_probe(struct platform_device *pdev) break; }

+ INIT_DELAYED_WORK(&wled->ovp_work, wled_ovp_work); + rc = wled_configure_short_irq(wled, pdev); if (rc < 0) return rc;

+ rc = wled_configure_ovp_irq(wled, pdev); + if (rc < 0) + return rc; + val = WLED_DEFAULT_BRIGHTNESS; of_property_read_u32(pdev->dev.of_node, "default-brightness", &val);

@@ -880,7 +1264,9 @@ static int wled_remove(struct platform_device *pdev) struct wled *wled = dev_get_drvdata(&pdev->dev);

mutex_destroy(&wled->lock); + cancel_delayed_work_sync(&wled->ovp_work); disable_irq(wled->short_irq); + disable_irq(wled->ovp_irq);

return 0; }