The first patch is not really related and can be picked alone. The second and the third are to rework the power handling to get the EDID. Basically, we need to make sure all the needed is powered to be able to get the EDID. Before, we saw that getting the EDID failed as explained in the third patch.
Note that this series depends on:
https://lore.kernel.org/patchwork/project/lkml/list/?series=448525
to apply cleanly.
Enric Balletbo i Serra (3): drm/bridge: ps8640: Return an error for incorrect attach flags drm/bridge: ps8640: Print an error if VDO control fails drm/bridge: ps8640: Rework power state handling
drivers/gpu/drm/bridge/parade-ps8640.c | 94 ++++++++++++++++++++++---- 1 file changed, 82 insertions(+), 12 deletions(-)
Bridge drivers that implement the new model only shall return an error from their attach() handler when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is not set. So make sure we return an error because only the new drm_bridge model is supported.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com ---
drivers/gpu/drm/bridge/parade-ps8640.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 13755d278db6d..ce3e8b2da8c9b 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -200,6 +200,10 @@ static int ps8640_bridge_attach(struct drm_bridge *bridge, .channel = 0, .node = NULL, }; + + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) + return -EINVAL; + /* port@0 is ps8640 dsi input port */ in_ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1); if (!in_ep)
Hi Enric.
On Mon, Jun 15, 2020 at 10:53:18PM +0200, Enric Balletbo i Serra wrote:
Bridge drivers that implement the new model only shall return an error from their attach() handler when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is not set. So make sure we return an error because only the new drm_bridge model is supported.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com
Reviewed-by: Sam Ravnborg sam@ravnborg.org
I will await the updated series before applying.
drivers/gpu/drm/bridge/parade-ps8640.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 13755d278db6d..ce3e8b2da8c9b 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -200,6 +200,10 @@ static int ps8640_bridge_attach(struct drm_bridge *bridge, .channel = 0, .node = NULL, };
- if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
return -EINVAL;- /* port@0 is ps8640 dsi input port */ in_ep = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1); if (!in_ep)
-- 2.27.0
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Print an error message inside ps8640_bridge_vdo_control() function when it fails so we can simplify a bit the callers, they will only need to check the error code.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com ---
drivers/gpu/drm/bridge/parade-ps8640.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index ce3e8b2da8c9b..9f7b7a9c53c52 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -82,8 +82,11 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, ret = i2c_smbus_write_i2c_block_data(client, PAGE3_SET_ADD, sizeof(vdo_ctrl_buf), vdo_ctrl_buf); - if (ret < 0) + if (ret < 0) { + DRM_ERROR("failed to %sable VDO: %d\n", + ctrl == ENABLE ? "en" : "dis", ret); return ret; + }
return 0; } @@ -150,10 +153,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) }
ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE); - if (ret) { - DRM_ERROR("failed to enable VDO: %d\n", ret); + if (ret) goto err_regulators_disable; - }
/* Switch access edp panel's edid through i2c */ ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS, @@ -175,9 +176,7 @@ static void ps8640_post_disable(struct drm_bridge *bridge) struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); int ret;
- ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE); - if (ret < 0) - DRM_ERROR("failed to disable VDO: %d\n", ret); + ps8640_bridge_vdo_control(ps_bridge, DISABLE);
gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1);
On Mon, Jun 15, 2020 at 10:53:19PM +0200, Enric Balletbo i Serra wrote:
Print an error message inside ps8640_bridge_vdo_control() function when it fails so we can simplify a bit the callers, they will only need to check the error code.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com
Reviewed-by: Sam Ravnborg sam@ravnborg.org
drivers/gpu/drm/bridge/parade-ps8640.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index ce3e8b2da8c9b..9f7b7a9c53c52 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -82,8 +82,11 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, ret = i2c_smbus_write_i2c_block_data(client, PAGE3_SET_ADD, sizeof(vdo_ctrl_buf), vdo_ctrl_buf);
- if (ret < 0)
if (ret < 0) {
DRM_ERROR("failed to %sable VDO: %d\n",ctrl == ENABLE ? "en" : "dis", ret);return ret;
}
return 0;
} @@ -150,10 +153,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) }
ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE);
- if (ret) {
DRM_ERROR("failed to enable VDO: %d\n", ret);
- if (ret) goto err_regulators_disable;
}
/* Switch access edp panel's edid through i2c */ ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS,
@@ -175,9 +176,7 @@ static void ps8640_post_disable(struct drm_bridge *bridge) struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); int ret;
- ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- if (ret < 0)
DRM_ERROR("failed to disable VDO: %d\n", ret);
ps8640_bridge_vdo_control(ps_bridge, DISABLE);
gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1);
-- 2.27.0
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before. The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen, until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following:
1. If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device.
2. If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays.
3. This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com ---
drivers/gpu/drm/bridge/parade-ps8640.c | 79 ++++++++++++++++++++++++-- 1 file changed, 73 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 9f7b7a9c53c52..ca651480891df 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -65,6 +65,7 @@ struct ps8640 { struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown; + bool powered; };
static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) @@ -91,13 +92,25 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, return 0; }
-static void ps8640_pre_enable(struct drm_bridge *bridge) +static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) { - struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL]; + struct drm_bridge *panel; unsigned long timeout; int ret, status;
+ if (ps_bridge->powered) + return; + + /* + * That seems to be specific to this chip, and a weird behaviour, but + * we need to call drm_panel_prepare before issuing a poweron cycle. If + * we don't do this, the chip is not able to read properly the EDID. + */ + panel = ps_bridge->panel_bridge; + if (panel->funcs && panel->funcs->pre_enable) + panel->funcs->pre_enable(panel); + ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), ps_bridge->supplies); if (ret < 0) { @@ -164,6 +177,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) goto err_regulators_disable; }
+ ps_bridge->powered = true; + return;
err_regulators_disable: @@ -171,12 +186,13 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) ps_bridge->supplies); }
-static void ps8640_post_disable(struct drm_bridge *bridge) +static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge) { - struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + struct drm_bridge *panel; int ret;
- ps8640_bridge_vdo_control(ps_bridge, DISABLE); + if (!ps_bridge->powered) + return;
gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1); @@ -184,6 +200,32 @@ static void ps8640_post_disable(struct drm_bridge *bridge) ps_bridge->supplies); if (ret < 0) DRM_ERROR("cannot disable regulators %d\n", ret); + + panel = ps_bridge->panel_bridge; + if (panel->funcs && panel->funcs->post_disable) + panel->funcs->post_disable(panel); + + ps_bridge->powered = false; +} + +static void ps8640_pre_enable(struct drm_bridge *bridge) +{ + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + int ret; + + ps8640_bridge_poweron(ps_bridge); + + ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE); + if (ret < 0) + ps8640_bridge_poweroff(ps_bridge); +} + +static void ps8640_post_disable(struct drm_bridge *bridge) +{ + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + + ps8640_bridge_vdo_control(ps_bridge, DISABLE); + ps8640_bridge_poweroff(ps_bridge); }
static int ps8640_bridge_attach(struct drm_bridge *bridge, @@ -249,9 +291,34 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + bool poweroff = !ps_bridge->powered; + struct edid *edid; + + /* + * When we end calling get_edid() triggered by an ioctl, i.e + * + * drm_mode_getconnector (ioctl) + * -> drm_helper_probe_single_connector_modes + * -> drm_bridge_connector_get_modes + * -> ps8640_bridge_get_edid + * + * We need to make sure that what we need is enabled before reading + * EDID, for this chip, we need to do a full poweron, otherwise it will + * fail. + */ + ps8640_bridge_poweron(ps_bridge);
- return drm_get_edid(connector, + edid = drm_get_edid(connector, ps_bridge->page[PAGE0_DP_CNTL]->adapter); + + /* + * If we call the get_edid() function without having enabled the chip + * before, return the chip to its original power state. + */ + if (poweroff) + ps8640_bridge_poweroff(ps_bridge); + + return edid; }
static const struct drm_bridge_funcs ps8640_bridge_funcs = {
Hi Enric.
On Mon, Jun 15, 2020 at 10:53:20PM +0200, Enric Balletbo i Serra wrote:
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before.
Is it correct to fix this in the driver? Why not just fail and tell user-sapce to try again later? (Dunno what error-code to use - there must be one).
Then we avoid complicating drivers fro somethign we really should fix in user-space.
The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen,
that you do not see ...
(Otherwise I do not parse the above).
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following:
If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device.
If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays.
This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID.
Step 3. looks like an ugly hack too....
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com
drivers/gpu/drm/bridge/parade-ps8640.c | 79 ++++++++++++++++++++++++-- 1 file changed, 73 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 9f7b7a9c53c52..ca651480891df 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -65,6 +65,7 @@ struct ps8640 { struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown;
- bool powered;
};
static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) @@ -91,13 +92,25 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, return 0; }
-static void ps8640_pre_enable(struct drm_bridge *bridge) +static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
struct drm_bridge *panel; unsigned long timeout; int ret, status;
if (ps_bridge->powered)
return;/*
* That seems to be specific to this chip, and a weird behaviour, but* we need to call drm_panel_prepare before issuing a poweron cycle. If* we don't do this, the chip is not able to read properly the EDID.*/panel = ps_bridge->panel_bridge;
if (panel->funcs && panel->funcs->pre_enable)
panel->funcs->pre_enable(panel);ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), ps_bridge->supplies); if (ret < 0) {
@@ -164,6 +177,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) goto err_regulators_disable; }
- ps_bridge->powered = true;
- return;
err_regulators_disable: @@ -171,12 +186,13 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) ps_bridge->supplies); }
-static void ps8640_post_disable(struct drm_bridge *bridge) +static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- struct drm_bridge *panel; int ret;
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
if (!ps_bridge->powered)
return;gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1);
@@ -184,6 +200,32 @@ static void ps8640_post_disable(struct drm_bridge *bridge) ps_bridge->supplies); if (ret < 0) DRM_ERROR("cannot disable regulators %d\n", ret);
- panel = ps_bridge->panel_bridge;
- if (panel->funcs && panel->funcs->post_disable)
panel->funcs->post_disable(panel);- ps_bridge->powered = false;
+}
+static void ps8640_pre_enable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- int ret;
- ps8640_bridge_poweron(ps_bridge);
- ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- if (ret < 0)
ps8640_bridge_poweroff(ps_bridge);+}
+static void ps8640_post_disable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- ps8640_bridge_poweroff(ps_bridge);
}
static int ps8640_bridge_attach(struct drm_bridge *bridge, @@ -249,9 +291,34 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- bool poweroff = !ps_bridge->powered;
- struct edid *edid;
- /*
* When we end calling get_edid() triggered by an ioctl, i.e** drm_mode_getconnector (ioctl)* -> drm_helper_probe_single_connector_modes* -> drm_bridge_connector_get_modes* -> ps8640_bridge_get_edid** We need to make sure that what we need is enabled before reading* EDID, for this chip, we need to do a full poweron, otherwise it will* fail.*/- ps8640_bridge_poweron(ps_bridge);
- return drm_get_edid(connector,
- edid = drm_get_edid(connector, ps_bridge->page[PAGE0_DP_CNTL]->adapter);
- /*
* If we call the get_edid() function without having enabled the chip* before, return the chip to its original power state.*/- if (poweroff)
ps8640_bridge_poweroff(ps_bridge);- return edid;
}
static const struct drm_bridge_funcs ps8640_bridge_funcs = {
2.27.0
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Sam,
Many thanks for your feedback. See my answers below.
On 20/6/20 23:42, Sam Ravnborg wrote:
Hi Enric.
On Mon, Jun 15, 2020 at 10:53:20PM +0200, Enric Balletbo i Serra wrote:
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before.
Is it correct to fix this in the driver? Why not just fail and tell user-sapce to try again later? (Dunno what error-code to use - there must be one).
My undestanding, I might be wrong, is that userspace should don't know which bits, regulators, etc, are needed to get the EDID with an ioctl. Is the kernel that should make sure that all is set properly (the required regulators, etc) when userspace wants to read the EDID.
Then we avoid complicating drivers fro somethign we really should fix in user-space.
The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen,
that you do not see ...
(Otherwise I do not parse the above).
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following:
If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device.
If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays.
This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID.
Step 3. looks like an ugly hack too....
It is, but I don't have enough hardware details to be able to answer why we need to do this. What is well tested is that, if I don't power the panel before powering on the bridge, it doesn't get a proper EDID. Seems that when the bridge goes up, the firmware tries to read the EDID and caches somehow. Well not sure.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com
drivers/gpu/drm/bridge/parade-ps8640.c | 79 ++++++++++++++++++++++++-- 1 file changed, 73 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 9f7b7a9c53c52..ca651480891df 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -65,6 +65,7 @@ struct ps8640 { struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown;
- bool powered;
};
static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) @@ -91,13 +92,25 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, return 0; }
-static void ps8640_pre_enable(struct drm_bridge *bridge) +static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
struct drm_bridge *panel; unsigned long timeout; int ret, status;
if (ps_bridge->powered)
return;/*
* That seems to be specific to this chip, and a weird behaviour, but* we need to call drm_panel_prepare before issuing a poweron cycle. If* we don't do this, the chip is not able to read properly the EDID.*/panel = ps_bridge->panel_bridge;
if (panel->funcs && panel->funcs->pre_enable)
panel->funcs->pre_enable(panel);ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), ps_bridge->supplies); if (ret < 0) {
@@ -164,6 +177,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) goto err_regulators_disable; }
- ps_bridge->powered = true;
- return;
err_regulators_disable: @@ -171,12 +186,13 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) ps_bridge->supplies); }
-static void ps8640_post_disable(struct drm_bridge *bridge) +static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- struct drm_bridge *panel; int ret;
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
if (!ps_bridge->powered)
return;gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1);
@@ -184,6 +200,32 @@ static void ps8640_post_disable(struct drm_bridge *bridge) ps_bridge->supplies); if (ret < 0) DRM_ERROR("cannot disable regulators %d\n", ret);
- panel = ps_bridge->panel_bridge;
- if (panel->funcs && panel->funcs->post_disable)
panel->funcs->post_disable(panel);- ps_bridge->powered = false;
+}
+static void ps8640_pre_enable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- int ret;
- ps8640_bridge_poweron(ps_bridge);
- ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- if (ret < 0)
ps8640_bridge_poweroff(ps_bridge);+}
+static void ps8640_post_disable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- ps8640_bridge_poweroff(ps_bridge);
}
static int ps8640_bridge_attach(struct drm_bridge *bridge, @@ -249,9 +291,34 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- bool poweroff = !ps_bridge->powered;
- struct edid *edid;
- /*
* When we end calling get_edid() triggered by an ioctl, i.e** drm_mode_getconnector (ioctl)* -> drm_helper_probe_single_connector_modes* -> drm_bridge_connector_get_modes* -> ps8640_bridge_get_edid** We need to make sure that what we need is enabled before reading* EDID, for this chip, we need to do a full poweron, otherwise it will* fail.*/- ps8640_bridge_poweron(ps_bridge);
- return drm_get_edid(connector,
- edid = drm_get_edid(connector, ps_bridge->page[PAGE0_DP_CNTL]->adapter);
- /*
* If we call the get_edid() function without having enabled the chip* before, return the chip to its original power state.*/- if (poweroff)
ps8640_bridge_poweroff(ps_bridge);- return edid;
}
static const struct drm_bridge_funcs ps8640_bridge_funcs = {
2.27.0
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Enric.
On Tue, Jun 23, 2020 at 05:16:43PM +0200, Enric Balletbo i Serra wrote:
Hi Sam,
Many thanks for your feedback. See my answers below.
On 20/6/20 23:42, Sam Ravnborg wrote:
Hi Enric.
On Mon, Jun 15, 2020 at 10:53:20PM +0200, Enric Balletbo i Serra wrote:
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before.
Is it correct to fix this in the driver? Why not just fail and tell user-sapce to try again later? (Dunno what error-code to use - there must be one).
My undestanding, I might be wrong, is that userspace should don't know which bits, regulators, etc, are needed to get the EDID with an ioctl. Is the kernel that should make sure that all is set properly (the required regulators, etc) when userspace wants to read the EDID.
The idea I suggest is that the kernel side should just error out and let user-space retry later. So we avoid all the extra logic in the kernel because userspace wants info before the HW is ready. And userspace shall anyway deal with the ioctl that fails.
Sam
Then we avoid complicating drivers fro somethign we really should fix in user-space.
The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen,
that you do not see ...
(Otherwise I do not parse the above).
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following:
If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device.
If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays.
This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID.
Step 3. looks like an ugly hack too....
It is, but I don't have enough hardware details to be able to answer why we need to do this. What is well tested is that, if I don't power the panel before powering on the bridge, it doesn't get a proper EDID. Seems that when the bridge goes up, the firmware tries to read the EDID and caches somehow. Well not sure.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com
drivers/gpu/drm/bridge/parade-ps8640.c | 79 ++++++++++++++++++++++++-- 1 file changed, 73 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 9f7b7a9c53c52..ca651480891df 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -65,6 +65,7 @@ struct ps8640 { struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown;
- bool powered;
};
static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) @@ -91,13 +92,25 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, return 0; }
-static void ps8640_pre_enable(struct drm_bridge *bridge) +static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
struct drm_bridge *panel; unsigned long timeout; int ret, status;
if (ps_bridge->powered)
return;/*
* That seems to be specific to this chip, and a weird behaviour, but* we need to call drm_panel_prepare before issuing a poweron cycle. If* we don't do this, the chip is not able to read properly the EDID.*/panel = ps_bridge->panel_bridge;
if (panel->funcs && panel->funcs->pre_enable)
panel->funcs->pre_enable(panel);ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), ps_bridge->supplies); if (ret < 0) {
@@ -164,6 +177,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) goto err_regulators_disable; }
- ps_bridge->powered = true;
- return;
err_regulators_disable: @@ -171,12 +186,13 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) ps_bridge->supplies); }
-static void ps8640_post_disable(struct drm_bridge *bridge) +static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- struct drm_bridge *panel; int ret;
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
if (!ps_bridge->powered)
return;gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1);
@@ -184,6 +200,32 @@ static void ps8640_post_disable(struct drm_bridge *bridge) ps_bridge->supplies); if (ret < 0) DRM_ERROR("cannot disable regulators %d\n", ret);
- panel = ps_bridge->panel_bridge;
- if (panel->funcs && panel->funcs->post_disable)
panel->funcs->post_disable(panel);- ps_bridge->powered = false;
+}
+static void ps8640_pre_enable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- int ret;
- ps8640_bridge_poweron(ps_bridge);
- ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- if (ret < 0)
ps8640_bridge_poweroff(ps_bridge);+}
+static void ps8640_post_disable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- ps8640_bridge_poweroff(ps_bridge);
}
static int ps8640_bridge_attach(struct drm_bridge *bridge, @@ -249,9 +291,34 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- bool poweroff = !ps_bridge->powered;
- struct edid *edid;
- /*
* When we end calling get_edid() triggered by an ioctl, i.e** drm_mode_getconnector (ioctl)* -> drm_helper_probe_single_connector_modes* -> drm_bridge_connector_get_modes* -> ps8640_bridge_get_edid** We need to make sure that what we need is enabled before reading* EDID, for this chip, we need to do a full poweron, otherwise it will* fail.*/- ps8640_bridge_poweron(ps_bridge);
- return drm_get_edid(connector,
- edid = drm_get_edid(connector, ps_bridge->page[PAGE0_DP_CNTL]->adapter);
- /*
* If we call the get_edid() function without having enabled the chip* before, return the chip to its original power state.*/- if (poweroff)
ps8640_bridge_poweroff(ps_bridge);- return edid;
}
static const struct drm_bridge_funcs ps8640_bridge_funcs = {
2.27.0
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Sam,
On 24/6/20 9:07, Sam Ravnborg wrote:
Hi Enric.
On Tue, Jun 23, 2020 at 05:16:43PM +0200, Enric Balletbo i Serra wrote:
Hi Sam,
Many thanks for your feedback. See my answers below.
On 20/6/20 23:42, Sam Ravnborg wrote:
Hi Enric.
On Mon, Jun 15, 2020 at 10:53:20PM +0200, Enric Balletbo i Serra wrote:
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before.
Is it correct to fix this in the driver? Why not just fail and tell user-sapce to try again later? (Dunno what error-code to use - there must be one).
My undestanding, I might be wrong, is that userspace should don't know which bits, regulators, etc, are needed to get the EDID with an ioctl. Is the kernel that should make sure that all is set properly (the required regulators, etc) when userspace wants to read the EDID.
The idea I suggest is that the kernel side should just error out and let user-space retry later.
I see, I got it.
So we avoid all the extra logic in the kernel because userspace wants info before the HW is ready. And userspace shall anyway deal with the ioctl that fails.
My doubt here is, at which point the kernel driver should leave the hardware in a state that getting the EDID should work? After the bridge pre_enable() or enable() calls? After has been proved? AFAIK the bridge pre_enable() and enable() calls are only about enable the stream out and in most cases you can get the EDID without having to call pre_enable() and enable() before.
Thanks, Enric
Sam
Then we avoid complicating drivers fro somethign we really should fix in user-space.
The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen,
that you do not see ...
(Otherwise I do not parse the above).
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following:
If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device.
If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays.
This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID.
Step 3. looks like an ugly hack too....
It is, but I don't have enough hardware details to be able to answer why we need to do this. What is well tested is that, if I don't power the panel before powering on the bridge, it doesn't get a proper EDID. Seems that when the bridge goes up, the firmware tries to read the EDID and caches somehow. Well not sure.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com
drivers/gpu/drm/bridge/parade-ps8640.c | 79 ++++++++++++++++++++++++-- 1 file changed, 73 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 9f7b7a9c53c52..ca651480891df 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -65,6 +65,7 @@ struct ps8640 { struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown;
- bool powered;
};
static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) @@ -91,13 +92,25 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, return 0; }
-static void ps8640_pre_enable(struct drm_bridge *bridge) +static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
struct drm_bridge *panel; unsigned long timeout; int ret, status;
if (ps_bridge->powered)
return;/*
* That seems to be specific to this chip, and a weird behaviour, but* we need to call drm_panel_prepare before issuing a poweron cycle. If* we don't do this, the chip is not able to read properly the EDID.*/panel = ps_bridge->panel_bridge;
if (panel->funcs && panel->funcs->pre_enable)
panel->funcs->pre_enable(panel);ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), ps_bridge->supplies); if (ret < 0) {
@@ -164,6 +177,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) goto err_regulators_disable; }
- ps_bridge->powered = true;
- return;
err_regulators_disable: @@ -171,12 +186,13 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) ps_bridge->supplies); }
-static void ps8640_post_disable(struct drm_bridge *bridge) +static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- struct drm_bridge *panel; int ret;
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
if (!ps_bridge->powered)
return;gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1);
@@ -184,6 +200,32 @@ static void ps8640_post_disable(struct drm_bridge *bridge) ps_bridge->supplies); if (ret < 0) DRM_ERROR("cannot disable regulators %d\n", ret);
- panel = ps_bridge->panel_bridge;
- if (panel->funcs && panel->funcs->post_disable)
panel->funcs->post_disable(panel);- ps_bridge->powered = false;
+}
+static void ps8640_pre_enable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- int ret;
- ps8640_bridge_poweron(ps_bridge);
- ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- if (ret < 0)
ps8640_bridge_poweroff(ps_bridge);+}
+static void ps8640_post_disable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- ps8640_bridge_poweroff(ps_bridge);
}
static int ps8640_bridge_attach(struct drm_bridge *bridge, @@ -249,9 +291,34 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- bool poweroff = !ps_bridge->powered;
- struct edid *edid;
- /*
* When we end calling get_edid() triggered by an ioctl, i.e** drm_mode_getconnector (ioctl)* -> drm_helper_probe_single_connector_modes* -> drm_bridge_connector_get_modes* -> ps8640_bridge_get_edid** We need to make sure that what we need is enabled before reading* EDID, for this chip, we need to do a full poweron, otherwise it will* fail.*/- ps8640_bridge_poweron(ps_bridge);
- return drm_get_edid(connector,
- edid = drm_get_edid(connector, ps_bridge->page[PAGE0_DP_CNTL]->adapter);
- /*
* If we call the get_edid() function without having enabled the chip* before, return the chip to its original power state.*/- if (poweroff)
ps8640_bridge_poweroff(ps_bridge);- return edid;
}
static const struct drm_bridge_funcs ps8640_bridge_funcs = {
2.27.0
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Dear drm_bridge maintainers,
It's been a while since I send these patches, and I'd like to find a proper solution.
On 25/6/20 11:21, Enric Balletbo i Serra wrote:
Hi Sam,
On 24/6/20 9:07, Sam Ravnborg wrote:
Hi Enric.
On Tue, Jun 23, 2020 at 05:16:43PM +0200, Enric Balletbo i Serra wrote:
Hi Sam,
Many thanks for your feedback. See my answers below.
On 20/6/20 23:42, Sam Ravnborg wrote:
Hi Enric.
On Mon, Jun 15, 2020 at 10:53:20PM +0200, Enric Balletbo i Serra wrote:
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before.
Is it correct to fix this in the driver? Why not just fail and tell user-sapce to try again later? (Dunno what error-code to use - there must be one).
My undestanding, I might be wrong, is that userspace should don't know which bits, regulators, etc, are needed to get the EDID with an ioctl. Is the kernel that should make sure that all is set properly (the required regulators, etc) when userspace wants to read the EDID.
The idea I suggest is that the kernel side should just error out and let user-space retry later.
I see, I got it.
So we avoid all the extra logic in the kernel because userspace wants info before the HW is ready. And userspace shall anyway deal with the ioctl that fails.
My doubt here is, at which point the kernel driver should leave the hardware in a state that getting the EDID should work? After the bridge pre_enable() or enable() calls? After has been proved? AFAIK the bridge pre_enable() and enable() calls are only about enable the stream out and in most cases you can get the EDID without having to call pre_enable() and enable() before.
Let me reformulate the question for if it was not clear.
What I did is be able to read the EDID every time userspace asks for it (so kernel enables all the required) and Sam is proposing to just fail if all is not setup. I can obviously do this but my question is, at which point I should leave all the logic enabled to be able to read the EDID (after probe?, after pre_enable, after enable?) It is not clear for me from the API.
Thanks, Enric
Thanks, Enric
Sam
Then we avoid complicating drivers fro somethign we really should fix in user-space.
The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen,
that you do not see ...
(Otherwise I do not parse the above).
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following:
If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device.
If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays.
This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID.
Step 3. looks like an ugly hack too....
It is, but I don't have enough hardware details to be able to answer why we need to do this. What is well tested is that, if I don't power the panel before powering on the bridge, it doesn't get a proper EDID. Seems that when the bridge goes up, the firmware tries to read the EDID and caches somehow. Well not sure.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com
drivers/gpu/drm/bridge/parade-ps8640.c | 79 ++++++++++++++++++++++++-- 1 file changed, 73 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 9f7b7a9c53c52..ca651480891df 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -65,6 +65,7 @@ struct ps8640 { struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown;
- bool powered;
};
static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) @@ -91,13 +92,25 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, return 0; }
-static void ps8640_pre_enable(struct drm_bridge *bridge) +static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
struct drm_bridge *panel; unsigned long timeout; int ret, status;
if (ps_bridge->powered)
return;/*
* That seems to be specific to this chip, and a weird behaviour, but* we need to call drm_panel_prepare before issuing a poweron cycle. If* we don't do this, the chip is not able to read properly the EDID.*/panel = ps_bridge->panel_bridge;
if (panel->funcs && panel->funcs->pre_enable)
panel->funcs->pre_enable(panel);ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), ps_bridge->supplies); if (ret < 0) {
@@ -164,6 +177,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) goto err_regulators_disable; }
- ps_bridge->powered = true;
- return;
err_regulators_disable: @@ -171,12 +186,13 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) ps_bridge->supplies); }
-static void ps8640_post_disable(struct drm_bridge *bridge) +static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- struct drm_bridge *panel; int ret;
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
if (!ps_bridge->powered)
return;gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1);
@@ -184,6 +200,32 @@ static void ps8640_post_disable(struct drm_bridge *bridge) ps_bridge->supplies); if (ret < 0) DRM_ERROR("cannot disable regulators %d\n", ret);
- panel = ps_bridge->panel_bridge;
- if (panel->funcs && panel->funcs->post_disable)
panel->funcs->post_disable(panel);- ps_bridge->powered = false;
+}
+static void ps8640_pre_enable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- int ret;
- ps8640_bridge_poweron(ps_bridge);
- ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- if (ret < 0)
ps8640_bridge_poweroff(ps_bridge);+}
+static void ps8640_post_disable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- ps8640_bridge_poweroff(ps_bridge);
}
static int ps8640_bridge_attach(struct drm_bridge *bridge, @@ -249,9 +291,34 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- bool poweroff = !ps_bridge->powered;
- struct edid *edid;
- /*
* When we end calling get_edid() triggered by an ioctl, i.e** drm_mode_getconnector (ioctl)* -> drm_helper_probe_single_connector_modes* -> drm_bridge_connector_get_modes* -> ps8640_bridge_get_edid** We need to make sure that what we need is enabled before reading* EDID, for this chip, we need to do a full poweron, otherwise it will* fail.*/- ps8640_bridge_poweron(ps_bridge);
- return drm_get_edid(connector,
- edid = drm_get_edid(connector, ps_bridge->page[PAGE0_DP_CNTL]->adapter);
- /*
* If we call the get_edid() function without having enabled the chip* before, return the chip to its original power state.*/- if (poweroff)
ps8640_bridge_poweroff(ps_bridge);- return edid;
}
static const struct drm_bridge_funcs ps8640_bridge_funcs = {
2.27.0
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Enric.
Let me reformulate the question for if it was not clear.
What I did is be able to read the EDID every time userspace asks for it (so kernel enables all the required) and Sam is proposing to just fail if all is not setup. I can obviously do this but my question is, at which point I should leave all the logic enabled to be able to read the EDID (after probe?, after pre_enable, after enable?) It is not clear for me from the API.
I am not clear if my suggestion is a good suggestion.
I recall I saw something similar in another bridge driver.
If no-one else chimes in then go ahead with your original approach where there is less restriction when it is possible to read edid.
Sam
Hi Enric.
On Fri, Aug 21, 2020 at 01:38:09PM +0200, Sam Ravnborg wrote:
Hi Enric.
Let me reformulate the question for if it was not clear.
What I did is be able to read the EDID every time userspace asks for it (so kernel enables all the required) and Sam is proposing to just fail if all is not setup. I can obviously do this but my question is, at which point I should leave all the logic enabled to be able to read the EDID (after probe?, after pre_enable, after enable?) It is not clear for me from the API.
I am not clear if my suggestion is a good suggestion.
I recall I saw something similar in another bridge driver.
I have noew checked - and there is several bridge drivers that do a power_on to read get_edid - so I was mistaken. Sorry!
Sam
On Mon, Jun 15, 2020 at 10:53:20PM +0200, Enric Balletbo i Serra wrote:
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before. The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen, until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following:
If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device.
If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays.
This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID.
Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com
drivers/gpu/drm/bridge/parade-ps8640.c | 79 ++++++++++++++++++++++++-- 1 file changed, 73 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 9f7b7a9c53c52..ca651480891df 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -65,6 +65,7 @@ struct ps8640 { struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown;
- bool powered;
};
static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) @@ -91,13 +92,25 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, return 0; }
-static void ps8640_pre_enable(struct drm_bridge *bridge) +static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
struct drm_bridge *panel; unsigned long timeout; int ret, status;
if (ps_bridge->powered)
return;/*
* That seems to be specific to this chip, and a weird behaviour, but* we need to call drm_panel_prepare before issuing a poweron cycle. If* we don't do this, the chip is not able to read properly the EDID.*/panel = ps_bridge->panel_bridge;
if (panel->funcs && panel->funcs->pre_enable)
panel->funcs->pre_enable(panel);ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), ps_bridge->supplies); if (ret < 0) {
@@ -164,6 +177,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) goto err_regulators_disable; }
- ps_bridge->powered = true;
- return;
err_regulators_disable: @@ -171,12 +186,13 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) ps_bridge->supplies); }
-static void ps8640_post_disable(struct drm_bridge *bridge) +static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge) {
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- struct drm_bridge *panel; int ret;
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
if (!ps_bridge->powered)
return;gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1);
@@ -184,6 +200,32 @@ static void ps8640_post_disable(struct drm_bridge *bridge) ps_bridge->supplies); if (ret < 0) DRM_ERROR("cannot disable regulators %d\n", ret);
- panel = ps_bridge->panel_bridge;
- if (panel->funcs && panel->funcs->post_disable)
panel->funcs->post_disable(panel);- ps_bridge->powered = false;
+}
+static void ps8640_pre_enable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- int ret;
- ps8640_bridge_poweron(ps_bridge);
- ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- if (ret < 0)
ps8640_bridge_poweroff(ps_bridge);+}
+static void ps8640_post_disable(struct drm_bridge *bridge) +{
- struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- ps8640_bridge_vdo_control(ps_bridge, DISABLE);
- ps8640_bridge_poweroff(ps_bridge);
}
Hi Enric.
Would is be possible to use drm_bridge_chain_pre_enable() and drm_bridge_chain_post_disable() rather than hardcoding the dependencies here. The the already present logic to handle a bridged chain is used when pre_enable and post_disable. Seems better to use the present logic to handle bridged chains if possible. And it should simplify this logic a bit too.
Sam
static int ps8640_bridge_attach(struct drm_bridge *bridge, @@ -249,9 +291,34 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
- bool poweroff = !ps_bridge->powered;
- struct edid *edid;
- /*
* When we end calling get_edid() triggered by an ioctl, i.e** drm_mode_getconnector (ioctl)* -> drm_helper_probe_single_connector_modes* -> drm_bridge_connector_get_modes* -> ps8640_bridge_get_edid** We need to make sure that what we need is enabled before reading* EDID, for this chip, we need to do a full poweron, otherwise it will* fail.*/- ps8640_bridge_poweron(ps_bridge);
- return drm_get_edid(connector,
- edid = drm_get_edid(connector, ps_bridge->page[PAGE0_DP_CNTL]->adapter);
- /*
* If we call the get_edid() function without having enabled the chip* before, return the chip to its original power state.*/- if (poweroff)
ps8640_bridge_poweroff(ps_bridge);- return edid;
}
static const struct drm_bridge_funcs ps8640_bridge_funcs = {
2.27.0
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel@lists.freedesktop.org
-
Enric Balletbo i Serra -
Sam Ravnborg