From: Swati Sharma swati2.sharma@intel.com

This patch parses MAX_FRL field to get the MAX rate in Gbps that the HDMI 2.1 panel can support in FRL mode. Source need this field to determine the optimal rate between the source and sink during FRL training.

v2: Fixed minor bugs, and removed extra wrapper function (Uma Shankar)

Signed-off-by: Sharma, Swati2 swati2.sharma@intel.com Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com --- drivers/gpu/drm/drm_edid.c | 44 +++++++++++++++++++++++++++++++++++++ include/drm/drm_connector.h | 6 +++++ 2 files changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 74f5a3197214..e657c321d9e4 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -4851,6 +4851,41 @@ static void drm_parse_vcdb(struct drm_connector *connector, const u8 *db) info->rgb_quant_range_selectable = true; }

+static +void drm_get_max_frl_rate(int max_frl_rate, u8 *max_lanes, u8 *max_rate_per_lane) +{ + switch (max_frl_rate) { + case 1: + *max_lanes = 3; + *max_rate_per_lane = 3; + break; + case 2: + *max_lanes = 3; + *max_rate_per_lane = 6; + break; + case 3: + *max_lanes = 4; + *max_rate_per_lane = 6; + break; + case 4: + *max_lanes = 4; + *max_rate_per_lane = 8; + break; + case 5: + *max_lanes = 4; + *max_rate_per_lane = 10; + break; + case 6: + *max_lanes = 4; + *max_rate_per_lane = 12; + break; + case 0: + default: + *max_lanes = 0; + *max_rate_per_lane = 0; + } +} + static void drm_parse_ycbcr420_deep_color_info(struct drm_connector *connector, const u8 *db) { @@ -4904,6 +4939,15 @@ static void drm_parse_hdmi_forum_vsdb(struct drm_connector *connector, } }

+ if (hf_vsdb[7]) { + u8 max_frl_rate; + + DRM_DEBUG_KMS("hdmi_21 sink detected. parsing edid\n"); + max_frl_rate = (hf_vsdb[7] & DRM_EDID_MAX_FRL_RATE_MASK) >> 4; + drm_get_max_frl_rate(max_frl_rate, &hdmi->max_lanes, + &hdmi->max_frl_rate_per_lane); + } + drm_parse_ycbcr420_deep_color_info(connector, hf_vsdb); }

diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index fcdc58d8b88b..1a3b4776b458 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -207,6 +207,12 @@ struct drm_hdmi_info {

/** @y420_dc_modes: bitmap of deep color support index */ u8 y420_dc_modes; + + /** @max_frl_rate_per_lane: support fixed rate link */ + u8 max_frl_rate_per_lane; + + /** @max_lanes: supported by sink */ + u8 max_lanes; };

/**

This patch adds support for configuring a PCON device, connected as a DP branched device to enable FRL Link training with a HDMI2.1 + sink.

v2: Fixed typos and addressed other review comments from Uma Shankar. -changed the commit message for better clarity (Uma Shankar) -removed unnecessary argument supplied to a drm helper function. -fixed return value for max frl read from pcon.

v3: Removed DPCD 0x3035 for MAX Sink FRL b/w as per new version of spec.

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com (v2) --- drivers/gpu/drm/drm_dp_helper.c | 263 ++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 70 +++++++++ 2 files changed, 333 insertions(+)

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 5bd0934004e3..f501e3890921 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -2596,3 +2596,266 @@ void drm_dp_vsc_sdp_log(const char *level, struct device *dev, #undef DP_SDP_LOG } EXPORT_SYMBOL(drm_dp_vsc_sdp_log); + +/** + * drm_dp_get_pcon_max_frl_bw() - maximum frl supported by PCON + * @dpcd: DisplayPort configuration data + * @port_cap: port capabilities + * + * Returns maximum frl bandwidth supported by PCON in GBPS, + * returns 0 if not supported. + */ +int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]) +{ + int bw; + u8 buf; + + buf = port_cap[2]; + bw = buf & DP_PCON_MAX_FRL_BW; + + switch (bw) { + case DP_PCON_MAX_9GBPS: + return 9; + case DP_PCON_MAX_18GBPS: + return 18; + case DP_PCON_MAX_24GBPS: + return 24; + case DP_PCON_MAX_32GBPS: + return 32; + case DP_PCON_MAX_40GBPS: + return 40; + case DP_PCON_MAX_48GBPS: + return 48; + case DP_PCON_MAX_0GBPS: + default: + return 0; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_get_pcon_max_frl_bw); + +/** + * drm_dp_pcon_frl_prepare() - Prepare PCON for FRL. + * @aux: DisplayPort AUX channel + * + * Returns 0 if success, else returns negative error code. + */ +int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd) +{ + int ret; + u8 buf = DP_PCON_ENABLE_SOURCE_CTL_MODE | + DP_PCON_ENABLE_LINK_FRL_MODE; + + if (enable_frl_ready_hpd) + buf |= DP_PCON_ENABLE_HPD_READY; + + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); + + return ret; +} +EXPORT_SYMBOL(drm_dp_pcon_frl_prepare); + +/** + * drm_dp_pcon_is_frl_ready() - Is PCON ready for FRL + * @aux: DisplayPort AUX channel + * + * Returns true if success, else returns false. + */ +bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux) +{ + int ret; + u8 buf; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf); + if (ret < 0) + return false; + + if (buf & DP_PCON_FRL_READY) + return true; + + return false; +} +EXPORT_SYMBOL(drm_dp_pcon_is_frl_ready); + +/** + * drm_dp_pcon_frl_configure_1() - Set HDMI LINK Configuration-Step1 + * @aux: DisplayPort AUX channel + * @max_frl_gbps: maximum frl bw to be configured between PCON and HDMI sink + * @concurrent_mode: true if concurrent mode or operation is required, + * false otherwise. + * + * Returns 0 if success, else returns negative error code. + */ + +int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, + bool concurrent_mode) +{ + int ret; + u8 buf; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf); + if (ret < 0) + return ret; + + if (concurrent_mode) + buf |= DP_PCON_ENABLE_CONCURRENT_LINK; + else + buf &= ~DP_PCON_ENABLE_CONCURRENT_LINK; + + switch (max_frl_gbps) { + case 9: + buf |= DP_PCON_ENABLE_MAX_BW_9GBPS; + break; + case 18: + buf |= DP_PCON_ENABLE_MAX_BW_18GBPS; + break; + case 24: + buf |= DP_PCON_ENABLE_MAX_BW_24GBPS; + break; + case 32: + buf |= DP_PCON_ENABLE_MAX_BW_32GBPS; + break; + case 40: + buf |= DP_PCON_ENABLE_MAX_BW_40GBPS; + break; + case 48: + buf |= DP_PCON_ENABLE_MAX_BW_48GBPS; + break; + case 0: + buf |= DP_PCON_ENABLE_MAX_BW_0GBPS; + break; + default: + return -EINVAL; + } + + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_frl_configure_1); + +/** + * drm_dp_pcon_frl_configure_2() - Set HDMI Link configuration Step-2 + * @aux: DisplayPort AUX channel + * @max_frl_mask : Max FRL BW to be tried by the PCON with HDMI Sink + * @extended_train_mode : true for Extended Mode, false for Normal Mode. + * In Normal mode, the PCON tries each frl bw from the max_frl_mask starting + * from min, and stops when link training is successful. In Extended mode, all + * frl bw selected in the mask are trained by the PCON. + * + * Returns 0 if success, else returns negative error code. + */ +int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, + bool extended_train_mode) +{ + int ret; + u8 buf = max_frl_mask; + + if (extended_train_mode) + buf |= DP_PCON_FRL_LINK_TRAIN_EXTENDED; + + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_2, buf); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_frl_configure_2); + +/** + * drm_dp_pcon_reset_frl_config() - Re-Set HDMI Link configuration. + * @aux: DisplayPort AUX channel + * + * Returns 0 if success, else returns negative error code. + */ +int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux) +{ + int ret; + + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, 0x0); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_reset_frl_config); + +/** + * drm_dp_pcon_frl_enable() - Enable HDMI link through FRL + * @aux: DisplayPort AUX channel + * + * Returns 0 if success, else returns negative error code. + */ +int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux) +{ + int ret; + u8 buf = 0; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf); + if (ret < 0) + return ret; + if (!(buf & DP_PCON_ENABLE_SOURCE_CTL_MODE)) { + DRM_DEBUG_KMS("PCON in Autonomous mode, can't enable FRL\n"); + return -EINVAL; + } + buf |= DP_PCON_ENABLE_HDMI_LINK; + ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_frl_enable); + +/** + * drm_dp_pcon_hdmi_link_active() - check if the PCON HDMI LINK status is active. + * @aux: DisplayPort AUX channel + * + * Returns true if link is active else returns false. + */ +bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux) +{ + u8 buf; + int ret; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf); + if (ret < 0) + return false; + + return buf & DP_PCON_HDMI_TX_LINK_ACTIVE; +} +EXPORT_SYMBOL(drm_dp_pcon_hdmi_link_active); + +/** + * drm_dp_pcon_hdmi_link_mode() - get the PCON HDMI LINK MODE + * @aux: DisplayPort AUX channel + * @frl_trained_mask: pointer to store bitmask of the trained bw configuration. + * Valid only if the MODE returned is FRL. For Normal Link training mode + * only 1 of the bits will be set, but in case of Extended mode, more than + * one bits can be set. + * + * Returns the link mode : TMDS or FRL on success, else returns negative error + * code. + */ +int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask) +{ + u8 buf; + int mode; + int ret; + + ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_POST_FRL_STATUS, &buf); + if (ret < 0) + return ret; + + mode = buf & DP_PCON_HDMI_LINK_MODE; + + if (frl_trained_mask && DP_PCON_HDMI_MODE_FRL == mode) + *frl_trained_mask = (buf & DP_PCON_HDMI_FRL_TRAINED_BW) >> 1; + + return mode; +} +EXPORT_SYMBOL(drm_dp_pcon_hdmi_link_mode); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 6b40258927bf..c66f570eadc2 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -411,6 +411,17 @@ struct drm_device; # define DP_DS_10BPC 1 # define DP_DS_12BPC 2 # define DP_DS_16BPC 3 +/* HDMI2.1 PCON FRL CONFIGURATION */ +# define DP_PCON_MAX_FRL_BW (7 << 2) +# define DP_PCON_MAX_0GBPS (0 << 2) +# define DP_PCON_MAX_9GBPS (1 << 2) +# define DP_PCON_MAX_18GBPS (2 << 2) +# define DP_PCON_MAX_24GBPS (3 << 2) +# define DP_PCON_MAX_32GBPS (4 << 2) +# define DP_PCON_MAX_40GBPS (5 << 2) +# define DP_PCON_MAX_48GBPS (6 << 2) +# define DP_PCON_SOURCE_CTL_MODE (1 << 5) + /* offset 3 for DVI */ # define DP_DS_DVI_DUAL_LINK (1 << 1) # define DP_DS_DVI_HIGH_COLOR_DEPTH (1 << 2) @@ -1054,6 +1065,51 @@ struct drm_device; #define DP_CEC_TX_MESSAGE_BUFFER 0x3020 #define DP_CEC_MESSAGE_BUFFER_LENGTH 0x10

+/* PCON CONFIGURE-1 FRL FOR HDMI SINK */ +#define DP_PCON_HDMI_LINK_CONFIG_1 0x305A +# define DP_PCON_ENABLE_MAX_FRL_BW (7 << 0) +# define DP_PCON_ENABLE_MAX_BW_0GBPS 0 +# define DP_PCON_ENABLE_MAX_BW_9GBPS 1 +# define DP_PCON_ENABLE_MAX_BW_18GBPS 2 +# define DP_PCON_ENABLE_MAX_BW_24GBPS 3 +# define DP_PCON_ENABLE_MAX_BW_32GBPS 4 +# define DP_PCON_ENABLE_MAX_BW_40GBPS 5 +# define DP_PCON_ENABLE_MAX_BW_48GBPS 6 +# define DP_PCON_ENABLE_SOURCE_CTL_MODE (1 << 3) +# define DP_PCON_ENABLE_CONCURRENT_LINK (1 << 4) +# define DP_PCON_ENABLE_LINK_FRL_MODE (1 << 5) +# define DP_PCON_ENABLE_HPD_READY (1 << 6) +# define DP_PCON_ENABLE_HDMI_LINK (1 << 7) + +/* PCON CONFIGURE-2 FRL FOR HDMI SINK */ +#define DP_PCON_HDMI_LINK_CONFIG_2 0x305B +# define DP_PCON_MAX_LINK_BW_MASK (0x3F << 0) +# define DP_PCON_FRL_BW_MASK_9GBPS (1 << 0) +# define DP_PCON_FRL_BW_MASK_18GBPS (1 << 1) +# define DP_PCON_FRL_BW_MASK_24GBPS (1 << 2) +# define DP_PCON_FRL_BW_MASK_32GBPS (1 << 3) +# define DP_PCON_FRL_BW_MASK_40GBPS (1 << 4) +# define DP_PCON_FRL_BW_MASK_48GBPS (1 << 5) +# define DP_PCON_FRL_LINK_TRAIN_EXTENDED (1 << 6) + +/* PCON HDMI LINK STATUS */ +#define DP_PCON_HDMI_TX_LINK_STATUS 0x303B +# define DP_PCON_HDMI_TX_LINK_ACTIVE (1 << 0) +# define DP_PCON_FRL_READY (1 << 1) + +/* PCON HDMI POST FRL STATUS */ +#define DP_PCON_HDMI_POST_FRL_STATUS 0x3036 +# define DP_PCON_HDMI_LINK_MODE (1 << 0) +# define DP_PCON_HDMI_MODE_TMDS 0 +# define DP_PCON_HDMI_MODE_FRL 1 +# define DP_PCON_HDMI_FRL_TRAINED_BW (0x3F << 1) +# define DP_PCON_FRL_TRAINED_BW_9GBPS (1 << 1) +# define DP_PCON_FRL_TRAINED_BW_18GBPS (1 << 2) +# define DP_PCON_FRL_TRAINED_BW_24GBPS (1 << 3) +# define DP_PCON_FRL_TRAINED_BW_32GBPS (1 << 4) +# define DP_PCON_FRL_TRAINED_BW_40GBPS (1 << 5) +# define DP_PCON_FRL_TRAINED_BW_48GBPS (1 << 6) + #define DP_PROTOCOL_CONVERTER_CONTROL_0 0x3050 /* DP 1.3 */ # define DP_HDMI_DVI_OUTPUT_CONFIG (1 << 0) /* DP 1.3 */ #define DP_PROTOCOL_CONVERTER_CONTROL_1 0x3051 /* DP 1.3 */ @@ -1967,4 +2023,18 @@ int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, struct drm_dp_phy_test_params *data); int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux, struct drm_dp_phy_test_params *data, u8 dp_rev); +int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd); +bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, + bool concurrent_mode); +int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, + bool extended_train_mode); +int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux); + +bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux); +int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask); + #endif /* _DRM_DP_HELPER_H_ */

This patch adds registers for getting DSC encoder capability for a HDMI2.1 PCon. It also addes helper functions to configure DSC between the PCON and HDMI2.1 sink.

v2: Corrected offset for DSC encoder bpc and minor changes. Also added helper functions for getting pcon dsc encoder capabilities as suggested by Uma Shankar.

v3: Only setting the DSC bits for the Protocol Convertor control registers, avoiding overwritining color conversion bits.

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com (v2) --- drivers/gpu/drm/drm_dp_helper.c | 203 ++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 114 ++++++++++++++++++ 2 files changed, 317 insertions(+)

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index a1d518b3a173..689fd0d5f6c5 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -2898,3 +2898,206 @@ void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, } } EXPORT_SYMBOL(drm_dp_pcon_hdmi_frl_link_error_count); + +/* + * drm_dp_pcon_enc_is_dsc_1_2 - Does PCON Encoder supports DSC 1.2 + * @pcon_dsc_dpcd: DSC capabilities of the PCON DSC Encoder + * + * Returns true is PCON encoder is DSC 1.2 else returns false. + */ +bool drm_dp_pcon_enc_is_dsc_1_2(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]) +{ + u8 buf; + u8 major_v, minor_v; + + buf = pcon_dsc_dpcd[DP_PCON_DSC_VERSION - DP_PCON_DSC_ENCODER]; + major_v = (buf & DP_PCON_DSC_MAJOR_MASK) >> DP_PCON_DSC_MAJOR_SHIFT; + minor_v = (buf & DP_PCON_DSC_MINOR_MASK) >> DP_PCON_DSC_MINOR_SHIFT; + + if (major_v == 1 && minor_v == 2) + return true; + + return false; +} +EXPORT_SYMBOL(drm_dp_pcon_enc_is_dsc_1_2); + +/* + * drm_dp_pcon_dsc_max_slices - Get max slices supported by PCON DSC Encoder + * @pcon_dsc_dpcd: DSC capabilities of the PCON DSC Encoder + * + * Returns maximum no. of slices supported by the PCON DSC Encoder. + */ +int drm_dp_pcon_dsc_max_slices(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]) +{ + u8 slice_cap1, slice_cap2; + + slice_cap1 = pcon_dsc_dpcd[DP_PCON_DSC_SLICE_CAP_1 - DP_PCON_DSC_ENCODER]; + slice_cap2 = pcon_dsc_dpcd[DP_PCON_DSC_SLICE_CAP_2 - DP_PCON_DSC_ENCODER]; + + if (slice_cap2 & DP_PCON_DSC_24_PER_DSC_ENC) + return 24; + if (slice_cap2 & DP_PCON_DSC_20_PER_DSC_ENC) + return 20; + if (slice_cap2 & DP_PCON_DSC_16_PER_DSC_ENC) + return 16; + if (slice_cap1 & DP_PCON_DSC_12_PER_DSC_ENC) + return 12; + if (slice_cap1 & DP_PCON_DSC_10_PER_DSC_ENC) + return 10; + if (slice_cap1 & DP_PCON_DSC_8_PER_DSC_ENC) + return 8; + if (slice_cap1 & DP_PCON_DSC_6_PER_DSC_ENC) + return 6; + if (slice_cap1 & DP_PCON_DSC_4_PER_DSC_ENC) + return 4; + if (slice_cap1 & DP_PCON_DSC_2_PER_DSC_ENC) + return 2; + if (slice_cap1 & DP_PCON_DSC_1_PER_DSC_ENC) + return 1; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_dsc_max_slices); + +/* + * drm_dp_pcon_dsc_max_slice_width() - Get max slice width for Pcon DSC encoder + * @pcon_dsc_dpcd: DSC capabilities of the PCON DSC Encoder + * + * Returns maximum width of the slices in pixel width i.e. no. of pixels x 320. + */ +int drm_dp_pcon_dsc_max_slice_width(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]) +{ + u8 buf; + + buf = pcon_dsc_dpcd[DP_PCON_DSC_MAX_SLICE_WIDTH - DP_PCON_DSC_ENCODER]; + + return buf * DP_DSC_SLICE_WIDTH_MULTIPLIER; +} +EXPORT_SYMBOL(drm_dp_pcon_dsc_max_slice_width); + +/* + * drm_dp_pcon_dsc_bpp_incr() - Get bits per pixel increment for PCON DSC encoder + * @pcon_dsc_dpcd: DSC capabilities of the PCON DSC Encoder + * + * Returns the bpp precision supported by the PCON encoder. + */ +int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]) +{ + u8 buf; + + buf = pcon_dsc_dpcd[DP_PCON_DSC_BPP_INCR - DP_PCON_DSC_ENCODER]; + + switch (buf & DP_PCON_DSC_BPP_INCR_MASK) { + case DP_PCON_DSC_ONE_16TH_BPP: + return 16; + case DP_PCON_DSC_ONE_8TH_BPP: + return 8; + case DP_PCON_DSC_ONE_4TH_BPP: + return 4; + case DP_PCON_DSC_ONE_HALF_BPP: + return 2; + case DP_PCON_DSC_ONE_BPP: + return 1; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_dsc_bpp_incr); + +static +int drm_dp_pcon_configure_dsc_enc(struct drm_dp_aux *aux, u8 pps_buf_config) +{ + u8 buf; + int ret; + + ret = drm_dp_dpcd_readb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, &buf); + if (ret < 0) + return ret; + + buf |= DP_PCON_ENABLE_DSC_ENCODER; + + if (pps_buf_config <= DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER) { + buf &= ~DP_PCON_ENCODER_PPS_OVERRIDE_MASK; + buf |= pps_buf_config << 2; + } + + ret = drm_dp_dpcd_writeb(aux, DP_PROTOCOL_CONVERTER_CONTROL_2, buf); + if (ret < 0) + return ret; + + return 0; +} + +/** + * drm_dp_pcon_pps_default() - Let PCON fill the default pps parameters + * for DSC1.2 between PCON & HDMI2.1 sink + * @aux: DisplayPort AUX channel + * + * Returns 0 on success, else returns negative error code. + * */ +int drm_dp_pcon_pps_default(struct drm_dp_aux *aux) +{ + int ret; + + ret = drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_DISABLED); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_pps_default); + +/** + * drm_dp_pcon_pps_override_buf() - Configure PPS encoder override buffer for + * HDMI sink + * @aux: DisplayPort AUX channel + * @pps_buf: 128 bytes to be written into PPS buffer for HDMI sink by PCON. + * + * Returns 0 on success, else returns negative error code. + * */ +int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]) +{ + int ret; + + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVERRIDE_BASE, &pps_buf, 128); + if (ret < 0) + return ret; + + ret = drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_pps_override_buf); + +/* + * drm_dp_pcon_pps_override_param() - Write PPS parameters to DSC encoder + * override registers + * @aux: DisplayPort AUX channel + * @pps_param: 3 Parameters (2 Bytes each) : Slice Width, Slice Height, + * bits_per_pixel. + * + * Returns 0 on success, else returns negative error code. + * */ +int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]) +{ + int ret; + + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT, &pps_param[0], 2); + if (ret < 0) + return ret; + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH, &pps_param[2], 2); + if (ret < 0) + return ret; + ret = drm_dp_dpcd_write(aux, DP_PCON_HDMI_PPS_OVRD_BPP, &pps_param[4], 2); + if (ret < 0) + return ret; + + ret = drm_dp_pcon_configure_dsc_enc(aux, DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(drm_dp_pcon_pps_override_param); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 871e8c051642..baad87fe6b0a 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -441,6 +441,84 @@ struct drm_device; # define DP_FEC_CORR_BLK_ERROR_COUNT_CAP (1 << 2) # define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3)

+/* DP-HDMI2.1 PCON DSC ENCODER SUPPORT */ +#define DP_PCON_DSC_ENCODER_CAP_SIZE 0xC /* 0x9E - 0x92 */ +#define DP_PCON_DSC_ENCODER 0x092 +# define DP_PCON_DSC_ENCODER_SUPPORTED (1 << 0) +# define DP_PCON_DSC_PPS_ENC_OVERRIDE (1 << 1) + +/* DP-HDMI2.1 PCON DSC Version */ +#define DP_PCON_DSC_VERSION 0x093 +# define DP_PCON_DSC_MAJOR_MASK (0xF << 0) +# define DP_PCON_DSC_MINOR_MASK (0xF << 4) +# define DP_PCON_DSC_MAJOR_SHIFT 0 +# define DP_PCON_DSC_MINOR_SHIFT 4 + +/* DP-HDMI2.1 PCON DSC RC Buffer block size */ +#define DP_PCON_DSC_RC_BUF_BLK_INFO 0x094 +# define DP_PCON_DSC_RC_BUF_BLK_SIZE (0x3 << 0) +# define DP_PCON_DSC_RC_BUF_BLK_1KB 0 +# define DP_PCON_DSC_RC_BUF_BLK_4KB 1 +# define DP_PCON_DSC_RC_BUF_BLK_16KB 2 +# define DP_PCON_DSC_RC_BUF_BLK_64KB 3 + +/* DP-HDMI2.1 PCON DSC RC Buffer size */ +#define DP_PCON_DSC_RC_BUF_SIZE 0x095 + +/* DP-HDMI2.1 PCON DSC Slice capabilities-1 */ +#define DP_PCON_DSC_SLICE_CAP_1 0x096 +# define DP_PCON_DSC_1_PER_DSC_ENC (0x1 << 0) +# define DP_PCON_DSC_2_PER_DSC_ENC (0x1 << 1) +# define DP_PCON_DSC_4_PER_DSC_ENC (0x1 << 3) +# define DP_PCON_DSC_6_PER_DSC_ENC (0x1 << 4) +# define DP_PCON_DSC_8_PER_DSC_ENC (0x1 << 5) +# define DP_PCON_DSC_10_PER_DSC_ENC (0x1 << 6) +# define DP_PCON_DSC_12_PER_DSC_ENC (0x1 << 7) + +#define DP_PCON_DSC_BUF_BIT_DEPTH 0x097 +# define DP_PCON_DSC_BIT_DEPTH_MASK (0xF << 0) +# define DP_PCON_DSC_DEPTH_9_BITS 0 +# define DP_PCON_DSC_DEPTH_10_BITS 1 +# define DP_PCON_DSC_DEPTH_11_BITS 2 +# define DP_PCON_DSC_DEPTH_12_BITS 3 +# define DP_PCON_DSC_DEPTH_13_BITS 4 +# define DP_PCON_DSC_DEPTH_14_BITS 5 +# define DP_PCON_DSC_DEPTH_15_BITS 6 +# define DP_PCON_DSC_DEPTH_16_BITS 7 +# define DP_PCON_DSC_DEPTH_8_BITS 8 + +#define DP_PCON_DSC_BLOCK_PREDICTION 0x098 +# define DP_PCON_DSC_BLOCK_PRED_SUPPORT (0x1 << 0) + +#define DP_PCON_DSC_ENC_COLOR_FMT_CAP 0x099 +# define DP_PCON_DSC_ENC_RGB (0x1 << 0) +# define DP_PCON_DSC_ENC_YUV444 (0x1 << 1) +# define DP_PCON_DSC_ENC_YUV422_S (0x1 << 2) +# define DP_PCON_DSC_ENC_YUV422_N (0x1 << 3) +# define DP_PCON_DSC_ENC_YUV420_N (0x1 << 4) + +#define DP_PCON_DSC_ENC_COLOR_DEPTH_CAP 0x09A +# define DP_PCON_DSC_ENC_8BPC (0x1 << 1) +# define DP_PCON_DSC_ENC_10BPC (0x1 << 2) +# define DP_PCON_DSC_ENC_12BPC (0x1 << 3) + +#define DP_PCON_DSC_MAX_SLICE_WIDTH 0x09B + +/* DP-HDMI2.1 PCON DSC Slice capabilities-2 */ +#define DP_PCON_DSC_SLICE_CAP_2 0x09C +# define DP_PCON_DSC_16_PER_DSC_ENC (0x1 << 0) +# define DP_PCON_DSC_20_PER_DSC_ENC (0x1 << 1) +# define DP_PCON_DSC_24_PER_DSC_ENC (0x1 << 2) + +/* DP-HDMI2.1 PCON HDMI TX Encoder Bits/pixel increment */ +#define DP_PCON_DSC_BPP_INCR 0x09E +# define DP_PCON_DSC_BPP_INCR_MASK (0x7 << 0) +# define DP_PCON_DSC_ONE_16TH_BPP 0 +# define DP_PCON_DSC_ONE_8TH_BPP 1 +# define DP_PCON_DSC_ONE_4TH_BPP 2 +# define DP_PCON_DSC_ONE_HALF_BPP 3 +# define DP_PCON_DSC_ONE_BPP 4 + /* DP Extended DSC Capabilities */ #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_0 0x0a0 /* DP 1.4a SCR */ #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_1 0x0a1 @@ -1124,6 +1202,12 @@ struct drm_device; # define DP_HDMI_FORCE_SCRAMBLING (1 << 3) /* DP 1.4 */ #define DP_PROTOCOL_CONVERTER_CONTROL_2 0x3052 /* DP 1.3 */ # define DP_CONVERSION_TO_YCBCR422_ENABLE (1 << 0) /* DP 1.3 */ +# define DP_PCON_ENABLE_DSC_ENCODER (1 << 1) +# define DP_PCON_ENCODER_PPS_OVERRIDE_MASK (0x3 << 2) +# define DP_PCON_ENC_PPS_OVERRIDE_DISABLED 0 +# define DP_PCON_ENC_PPS_OVERRIDE_EN_PARAMS 1 +# define DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER 2 +

/* PCON Downstream HDMI ERROR Status per Lane */ #define DP_PCON_HDMI_ERROR_STATUS_LN0 0x3037 @@ -1135,6 +1219,29 @@ struct drm_device; # define DP_PCON_HDMI_ERROR_COUNT_TEN_PLUS (1 << 1) # define DP_PCON_HDMI_ERROR_COUNT_HUNDRED_PLUS (1 << 2)

+/* PCON HDMI CONFIG PPS Override Buffer + * Valid Offsets to be added to Base : 0-127 + */ +#define DP_PCON_HDMI_PPS_OVERRIDE_BASE 0x3100 + +/* PCON HDMI CONFIG PPS Override Parameter: Slice height + * Offset-0 8LSBs of the Slice height. + * Offset-1 8MSBs of the Slice height. + */ +#define DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT 0x3180 + +/* PCON HDMI CONFIG PPS Override Parameter: Slice width + * Offset-0 8LSBs of the Slice width. + * Offset-1 8MSBs of the Slice width. + */ +#define DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH 0x3182 + +/* PCON HDMI CONFIG PPS Override Parameter: bits_per_pixel + * Offset-0 8LSBs of the bits_per_pixel. + * Offset-1 2MSBs of the bits_per_pixel. + */ +#define DP_PCON_HDMI_PPS_OVRD_BPP 0x3184 + /* HDCP 1.3 and HDCP 2.2 */ #define DP_AUX_HDCP_BKSV 0x68000 #define DP_AUX_HDCP_RI_PRIME 0x68005 @@ -2053,5 +2160,12 @@ bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux); int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask); void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, struct drm_connector *connector); +bool drm_dp_pcon_enc_is_dsc_1_2(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slices(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slice_width(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_pps_default(struct drm_dp_aux *aux); +int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]); +int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]);

#endif /* _DRM_DP_HELPER_H_ */

This patch adds functions to start FRL training for an HDMI2.1 sink, connected via a PCON as a DP branch device. This patch also adds a new structure for storing frl training related data, when FRL training is completed.

v2: As suggested by Uma Shankar: -renamed couple of variables for better clarity -tweaked the macros used for correct semantics for true/false -fixed other styling issues.

v3: Completed the TODO for condition for going to FRL mode. Modified the condition to determine the required FRL b/w based only on the Pcon and Sink's max FRL values. Moved the frl structure initialization to intel_dp_init_connector().

v4: Fixed typo in initialization of frl structure.

v5: Always use FRL if its possible, instead of enabling only for higher modes as done in v3.

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com (v2) --- .../drm/i915/display/intel_display_types.h | 7 + drivers/gpu/drm/i915/display/intel_dp.c | 151 ++++++++++++++++++ drivers/gpu/drm/i915/display/intel_dp.h | 2 + 3 files changed, 160 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index c88d2b918d9f..daecff9783ea 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -1339,6 +1339,11 @@ struct intel_dp_compliance { u8 test_lane_count; };

+struct intel_dp_pcon_frl { + bool is_trained; + int trained_rate_gbps; +}; + struct intel_dp { i915_reg_t output_reg; u32 DP; @@ -1461,6 +1466,8 @@ struct intel_dp {

bool hobl_failed; bool hobl_active; + + struct intel_dp_pcon_frl frl; };

enum lspcon_vendor { diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 660b4bd2280a..1fdcb7672ad0 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -3883,6 +3883,8 @@ static void intel_disable_dp(struct intel_atomic_state *state, intel_edp_backlight_off(old_conn_state); intel_dp_set_power(intel_dp, DP_SET_POWER_D3); intel_edp_panel_off(intel_dp); + intel_dp->frl.is_trained = false; + intel_dp->frl.trained_rate_gbps = 0; }

static void g4x_disable_dp(struct intel_atomic_state *state, @@ -3978,6 +3980,152 @@ cpt_set_link_train(struct intel_dp *intel_dp, intel_de_posting_read(dev_priv, intel_dp->output_reg); }

+static int intel_dp_pcon_get_frl_mask(u8 frl_bw_mask) +{ + int bw_gbps[] = {9, 18, 24, 32, 40, 48}; + int i; + + for (i = ARRAY_SIZE(bw_gbps) - 1; i >= 0; i--) { + if (frl_bw_mask & (1 << i)) + return bw_gbps[i]; + } + return 0; +} + +static int intel_dp_pcon_set_frl_mask(int max_frl) +{ + + switch (max_frl) { + case 48: + return DP_PCON_FRL_BW_MASK_48GBPS; + case 40: + return DP_PCON_FRL_BW_MASK_40GBPS; + case 32: + return DP_PCON_FRL_BW_MASK_32GBPS; + case 24: + return DP_PCON_FRL_BW_MASK_24GBPS; + case 18: + return DP_PCON_FRL_BW_MASK_18GBPS; + case 9: + return DP_PCON_FRL_BW_MASK_9GBPS; + } + + return 0; +} + +static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_connector *connector = &intel_connector->base; + + return (connector->display_info.hdmi.max_frl_rate_per_lane * + connector->display_info.hdmi.max_lanes); +} + +static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp) +{ +#define PCON_EXTENDED_TRAIN_MODE (1 > 0) +#define PCON_CONCURRENT_MODE (1 > 0) +#define PCON_SEQUENTIAL_MODE !PCON_CONCURRENT_MODE +#define PCON_NORMAL_TRAIN_MODE !PCON_EXTENDED_TRAIN_MODE +#define TIMEOUT_FRL_READY_MS 500 +#define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000 + + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int max_frl_bw, max_pcon_frl_bw, max_edid_frl_bw, ret; + u8 max_frl_bw_mask = 0, frl_trained_mask; + bool is_active; + + ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux); + if (ret < 0) + return ret; + + max_pcon_frl_bw = intel_dp->dfp.pcon_max_frl_bw; + drm_dbg(&i915->drm, "PCON max rate = %d Gbps\n", max_pcon_frl_bw); + + max_edid_frl_bw = intel_dp_hdmi_sink_max_frl(intel_dp); + drm_dbg(&i915->drm, "Sink max rate from EDID = %d Gbps\n", max_edid_frl_bw); + + max_frl_bw = min(max_edid_frl_bw, max_pcon_frl_bw); + + if (max_frl_bw <= 0) + return -EINVAL; + + ret = drm_dp_pcon_frl_prepare(&intel_dp->aux, false); + if (ret < 0) + return ret; + /* Wait for PCON to be FRL Ready */ + wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == true, TIMEOUT_FRL_READY_MS); + + if (!is_active) + return -ETIMEDOUT; + + max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw); + ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, PCON_SEQUENTIAL_MODE); + if (ret < 0) + return ret; + ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, PCON_NORMAL_TRAIN_MODE); + if (ret < 0) + return ret; + ret = drm_dp_pcon_frl_enable(&intel_dp->aux); + if (ret < 0) + return ret; + /* + * Wait for FRL to be completed + * Check if the HDMI Link is up and active. + */ + wait_for(is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux) == true, TIMEOUT_HDMI_LINK_ACTIVE_MS); + + if (!is_active) + return -ETIMEDOUT; + + /* Verify HDMI Link configuration shows FRL Mode */ + if (DP_PCON_HDMI_MODE_FRL != drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, &frl_trained_mask)) { + drm_dbg(&i915->drm, "HDMI couldn't be trained in FRL Mode\n"); + return -EINVAL; + } + drm_dbg(&i915->drm, "MAX_FRL_MASK = %u, FRL_TRAINED_MASK = %u\n", max_frl_bw_mask, frl_trained_mask); + + intel_dp->frl.trained_rate_gbps = intel_dp_pcon_get_frl_mask(frl_trained_mask); + intel_dp->frl.is_trained = true; + drm_dbg(&i915->drm, "FRL trained with : %d Gbps\n", intel_dp->frl.trained_rate_gbps); + + return 0; +} + +static bool intel_dp_is_hdmi_2_1_sink(struct intel_dp *intel_dp) +{ + if (drm_dp_is_branch(intel_dp->dpcd) && + intel_dp->has_hdmi_sink && + intel_dp_hdmi_sink_max_frl(intel_dp) > 0) + return true; + + return false; +} + +void intel_dp_check_frl_training(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + /* Always go for FRL training if supported */ + if (!intel_dp_is_hdmi_2_1_sink(intel_dp) || + intel_dp->frl.is_trained) + return; + + if (intel_dp_pcon_start_frl_training(intel_dp) < 0) { + int ret, mode; + + drm_dbg(&dev_priv->drm, "Couldnt set FRL mode, continuing with TMDS mode\n"); + ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux); + mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL); + + if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS) + drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set TMDS mode\n"); + } else { + drm_dbg(&dev_priv->drm, "FRL training Completed\n"); + } +} + static void g4x_set_link_train(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, @@ -8202,6 +8350,9 @@ intel_dp_init_connector(struct intel_digital_port *dig_port, (temp & ~0xf) | 0xd); }

+ intel_dp->frl.is_trained = false; + intel_dp->frl.trained_rate_gbps = 0; + return true;

fail: diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h index b871a09b6901..58b76a20459c 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.h +++ b/drivers/gpu/drm/i915/display/intel_dp.h @@ -144,4 +144,6 @@ bool intel_dp_initial_fastset_check(struct intel_encoder *encoder, void intel_dp_sync_state(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state);

+void intel_dp_check_frl_training(struct intel_dp *intel_dp); + #endif /* __INTEL_DP_H__ */

From: Swati Sharma swati2.sharma@intel.com

In this patch enables support for detecting link failures between PCON and HDMI sink in i915 driver. HDMI link loss indication to upstream DP source is indicated via IRQ_HPD. This is followed by reading of HDMI link configuration status (HDMI_TX_LINK_ACTIVE_STATUS). If the PCON → HDMI 2.1 link status is off; reinitiate frl link training to recover. Also, report HDMI FRL link error count range for each individual FRL active lane is indicated by DOWNSTREAM_HDMI_ERROR_STATUS_LN registers.

v2: Checked for dpcd read and write failures and added debug message. (Uma Shankar)

v3: Rearranged code to re-start FRL link training or fall back to TMDS mode.

v4: Resused function to check frl which inturn restarts FRL and fallback to TMDS mode.

Signed-off-by: Swati Sharma swati2.sharma@intel.com Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com (v2) --- drivers/gpu/drm/i915/display/intel_dp.c | 53 +++++++++++++++++++++++-- 1 file changed, 50 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 9d0adce14613..daf2faaa40fb 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -6005,6 +6005,28 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) return link_ok; }

+static void +intel_dp_handle_hdmi_link_status_change(struct intel_dp *intel_dp) +{ + bool is_active; + u8 buf = 0; + + is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux); + if (intel_dp->frl.is_trained && !is_active) { + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf) < 0) + return; + + buf &= ~DP_PCON_ENABLE_HDMI_LINK; + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf) < 0) + return; + + drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux, &intel_dp->attached_connector->base); + + /* Restart FRL training or fall back to TMDS mode */ + intel_dp_check_frl_training(intel_dp); + } +} + static bool intel_dp_needs_link_retrain(struct intel_dp *intel_dp) { @@ -6370,7 +6392,7 @@ intel_dp_hotplug(struct intel_encoder *encoder, return state; }

-static void intel_dp_check_service_irq(struct intel_dp *intel_dp) +static void intel_dp_check_device_service_irq(struct intel_dp *intel_dp) { struct drm_i915_private *i915 = dp_to_i915(intel_dp); u8 val; @@ -6394,6 +6416,30 @@ static void intel_dp_check_service_irq(struct intel_dp *intel_dp) drm_dbg_kms(&i915->drm, "Sink specific irq unhandled\n"); }

+static void intel_dp_check_link_service_irq(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 val; + + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (drm_dp_dpcd_readb(&intel_dp->aux, + DP_LINK_SERVICE_IRQ_VECTOR_ESI0, &val) != 1 || !val) { + drm_dbg_kms(&i915->drm, "Error in reading link service irq vector\n"); + return; + } + + if (drm_dp_dpcd_writeb(&intel_dp->aux, + DP_LINK_SERVICE_IRQ_VECTOR_ESI0, val) != 1) { + drm_dbg_kms(&i915->drm, "Error in writing link service irq vector\n"); + return; + } + + if (val & HDMI_LINK_STATUS_CHANGED) + intel_dp_handle_hdmi_link_status_change(intel_dp); +} + /* * According to DP spec * 5.1.2: @@ -6433,7 +6479,8 @@ intel_dp_short_pulse(struct intel_dp *intel_dp) return false; }

- intel_dp_check_service_irq(intel_dp); + intel_dp_check_device_service_irq(intel_dp); + intel_dp_check_link_service_irq(intel_dp);

/* Handle CEC interrupts, if any */ drm_dp_cec_irq(&intel_dp->aux); @@ -6863,7 +6910,7 @@ intel_dp_detect(struct drm_connector *connector, to_intel_connector(connector)->detect_edid) status = connector_status_connected;

- intel_dp_check_service_irq(intel_dp); + intel_dp_check_device_service_irq(intel_dp);

out: if (status != connector_status_connected && !intel_dp->is_mst)

The DP-HDMI2.1 PCON spec provides way for a source to set PPS parameters: slice height, slice width and bits_per_pixel, based on the HDMI2.1 sink capabilities. The DSC encoder of the PCON will respect these parameters, while preparing the 128 byte PPS.

This patch adds helper functions to calculate these PPS paremeters as per the HDMI2.1 specification.

v2: Addressed review comments given by Uma Shankar: -added documentation for functions -fixed typos and errors

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com --- drivers/gpu/drm/i915/display/intel_hdmi.c | 233 ++++++++++++++++++++++ drivers/gpu/drm/i915/display/intel_hdmi.h | 7 + 2 files changed, 240 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c index e10fdb369daa..41eb1c175a0e 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.c +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c @@ -3428,3 +3428,236 @@ void intel_hdmi_init(struct drm_i915_private *dev_priv, dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port); intel_hdmi_init_connector(dig_port, intel_connector); } + +/* + * intel_hdmi_dsc_get_slice_height - get the dsc slice_height + * @vactive: Vactive of a display mode + * + * @return: appropriate dsc slice height for a given mode. + */ +int intel_hdmi_dsc_get_slice_height(int vactive) +{ + int slice_height; + + /* + * Slice Height determination : HDMI2.1 Section 7.7.5.2 + * Select smallest slice height >=96, that results in a valid PPS and + * requires minimum padding lines required for final slice. + * + * Assumption : Vactive is even. + */ + for (slice_height = 96; slice_height <= vactive; slice_height += 2) + if (vactive % slice_height == 0) + return slice_height; + + return 0; +} + +/* + * intel_hdmi_dsc_get_num_slices - get no. of dsc slices based on dsc encoder + * and dsc decoder capabilites + * + * @crtc_state: intel crtc_state + * @src_max_slices: maximum slices supported by the DSC encoder + * @src_max_slice_width: maximum slice width supported by DSC encoder + * @hdmi_max_slices: maximum slices supported by sink DSC decoder + * @hdmi_throughput: maximum clock per slice (MHz) supported by HDMI sink + * + * @return: num of dsc slices that can be supported by the dsc encoder + * and decoder. + */ +int +intel_hdmi_dsc_get_num_slices(const struct intel_crtc_state *crtc_state, + int src_max_slices, int src_max_slice_width, + int hdmi_max_slices, int hdmi_throughput) +{ +/* Pixel rates in KPixels/sec */ +#define HDMI_DSC_PEAK_PIXEL_RATE 2720000 +/* + * Rates at which the source and sink are required to process pixels in each + * slice, can be two levels: either atleast 340000KHz or atleast 40000KHz. + */ +#define HDMI_DSC_MAX_ENC_THROUGHPUT_0 340000 +#define HDMI_DSC_MAX_ENC_THROUGHPUT_1 400000 + +/* Spec limits the slice width to 2720 pixels */ +#define MAX_HDMI_SLICE_WIDTH 2720 + int kslice_adjust; + int adjusted_clk_khz; + int min_slices; + int target_slices; + int max_throughput; /* max clock freq. in khz per slice */ + int max_slice_width; + int slice_width; + int pixel_clock = crtc_state->hw.adjusted_mode.crtc_clock; + + if (!hdmi_throughput) + return 0; + + /* + * Slice Width determination : HDMI2.1 Section 7.7.5.1 + * kslice_adjust factor for 4:2:0, and 4:2:2 formats is 0.5, where as + * for 4:4:4 is 1.0. Multiplying these factors by 10 and later + * dividing adjusted clock value by 10. + */ + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 || + crtc_state->output_format == INTEL_OUTPUT_FORMAT_RGB) + kslice_adjust = 10; + else + kslice_adjust = 5; + + /* + * As per spec, the rate at which the source and the sink process + * the pixels per slice are at two levels: atleast 340Mhz or 400Mhz. + * This depends upon the pixel clock rate and output formats + * (kslice adjust). + * If pixel clock * kslice adjust >= 2720MHz slices can be processed + * at max 340MHz, otherwise they can be processed at max 400MHz. + */ + + adjusted_clk_khz = DIV_ROUND_UP(kslice_adjust * pixel_clock, 10); + + if (adjusted_clk_khz <= HDMI_DSC_PEAK_PIXEL_RATE) + max_throughput = HDMI_DSC_MAX_ENC_THROUGHPUT_0; + else + max_throughput = HDMI_DSC_MAX_ENC_THROUGHPUT_1; + + /* + * Taking into account the sink's capability for maximum + * clock per slice (in MHz) as read from HF-VSDB. + */ + max_throughput = min(max_throughput, hdmi_throughput * 1000); + + min_slices = DIV_ROUND_UP(adjusted_clk_khz, max_throughput); + max_slice_width = min(MAX_HDMI_SLICE_WIDTH, src_max_slice_width); + + /* + * Keep on increasing the num of slices/line, starting from min_slices + * per line till we get such a number, for which the slice_width is + * just less than max_slice_width. The slices/line selected should be + * less than or equal to the max horizontal slices that the combination + * of PCON encoder and HDMI decoder can support. + */ + slice_width = max_slice_width; + + do { + if (min_slices <= 1 && src_max_slices >= 1 && hdmi_max_slices >= 1) + target_slices = 1; + else if (min_slices <= 2 && src_max_slices >= 2 && hdmi_max_slices >= 2) + target_slices = 2; + else if (min_slices <= 4 && src_max_slices >= 4 && hdmi_max_slices >= 4) + target_slices = 4; + else if (min_slices <= 8 && src_max_slices >= 8 && hdmi_max_slices >= 8) + target_slices = 8; + else if (min_slices <= 12 && src_max_slices >= 12 && hdmi_max_slices >= 12) + target_slices = 12; + else if (min_slices <= 16 && src_max_slices >= 16 && hdmi_max_slices >= 16) + target_slices = 16; + else + return 0; + + slice_width = DIV_ROUND_UP(crtc_state->hw.adjusted_mode.hdisplay, target_slices); + if (slice_width >= max_slice_width) + min_slices = target_slices + 1; + } while (slice_width >= max_slice_width); + + return target_slices; +} + +/* + * intel_hdmi_dsc_get_bpp - get the appropriate compressed bits_per_pixel based on + * source and sink capabilities. + * + * @src_fraction_bpp: fractional bpp supported by the source + * @slice_width: dsc slice width supported by the source and sink + * @num_slices: num of slices supported by the source and sink + * @output_format: video output format + * @hdmi_all_bpp: sink supports decoding of 1/16th bpp setting + * @hdmi_max_chunk_bytes: max bytes in a line of chunks supported by sink + * + * @return: compressed bits_per_pixel in step of 1/16 of bits_per_pixel + */ +int +intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width, int num_slices, + int output_format, bool hdmi_all_bpp, + int hdmi_max_chunk_bytes) +{ + int max_dsc_bpp, min_dsc_bpp; + int target_bytes; + bool bpp_found = false; + int bpp_decrement_x16; + int bpp_target; + int bpp_target_x16; + + /* + * Get min bpp and max bpp as per Table 7.23, in HDMI2.1 spec + * Start with the max bpp and keep on decrementing with + * fractional bpp, if supported by PCON DSC encoder + * + * for each bpp we check if no of bytes can be supported by HDMI sink + */ + + /* Assuming: bpc as 8*/ + if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420) { + min_dsc_bpp = 6; + max_dsc_bpp = 3 * 4; /* 3*bpc/2 */ + } else if (output_format == INTEL_OUTPUT_FORMAT_YCBCR444 || + output_format == INTEL_OUTPUT_FORMAT_RGB) { + min_dsc_bpp = 8; + max_dsc_bpp = 3 * 8; /* 3*bpc */ + } else { + /* Assuming 4:2:2 encoding */ + min_dsc_bpp = 7; + max_dsc_bpp = 2 * 8; /* 2*bpc */ + } + + /* + * Taking into account if all dsc_all_bpp supported by HDMI2.1 sink + * Section 7.7.34 : Source shall not enable compressed Video + * Transport with bpp_target settings above 12 bpp unless + * DSC_all_bpp is set to 1. + */ + if (!hdmi_all_bpp) + max_dsc_bpp = min(max_dsc_bpp, 12); + + /* + * The Sink has a limit of compressed data in bytes for a scanline, + * as described in max_chunk_bytes field in HFVSDB block of edid. + * The no. of bytes depend on the target bits per pixel that the + * source configures. So we start with the max_bpp and calculate + * the target_chunk_bytes. We keep on decrementing the target_bpp, + * till we get the target_chunk_bytes just less than what the sink's + * max_chunk_bytes, or else till we reach the min_dsc_bpp. + * + * The decrement is according to the fractional support from PCON DSC + * encoder. For fractional BPP we use bpp_target as a multiple of 16. + * + * bpp_target_x16 = bpp_target * 16 + * So we need to decrement by {1, 2, 4, 8, 16} for fractional bpps + * {1/16, 1/8, 1/4, 1/2, 1} respectively. + */ + + bpp_target = max_dsc_bpp; + + /* src does not support fractional bpp implies decrement by 16 for bppx16 */ + if (!src_fractional_bpp) + src_fractional_bpp = 1; + bpp_decrement_x16 = DIV_ROUND_UP(16, src_fractional_bpp); + bpp_target_x16 = (bpp_target * 16) - bpp_decrement_x16; + + while (bpp_target_x16 > (min_dsc_bpp * 16)) { + int bpp; + + bpp = DIV_ROUND_UP(bpp_target_x16, 16); + target_bytes = DIV_ROUND_UP((num_slices * slice_width * bpp), 8); + if (target_bytes <= hdmi_max_chunk_bytes) { + bpp_found = true; + break; + } + bpp_target_x16 -= bpp_decrement_x16; + } + if (bpp_found) + return bpp_target_x16; + + return 0; +} diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.h b/drivers/gpu/drm/i915/display/intel_hdmi.h index 15eb0ccde76e..fa1a9b030850 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.h +++ b/drivers/gpu/drm/i915/display/intel_hdmi.h @@ -50,5 +50,12 @@ bool intel_hdmi_limited_color_range(const struct intel_crtc_state *crtc_state, const struct drm_connector_state *conn_state); bool intel_hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state, int bpc, bool has_hdmi_sink, bool ycbcr420_output); +int intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width, + int num_slices, int output_format, bool hdmi_all_bpp, + int hdmi_max_chunk_bytes); +int intel_hdmi_dsc_get_num_slices(const struct intel_crtc_state *crtc_state, + int src_max_slices, int src_max_slice_width, + int hdmi_max_slices, int hdmi_throughput); +int intel_hdmi_dsc_get_slice_height(int vactive);

#endif /* __INTEL_HDMI_H__ */

If PCON has capability to convert RGB->YUV colorspace and also to 444->420 downsampling then for any YUV420 only mode, we can let the PCON do all the conversion.

v2: As suggested by Uma Shankar, considered case for colorspace BT709 and BT2020, and default to BT609. Also appended dir 'display' in commit message.

Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com --- drivers/gpu/drm/i915/display/intel_ddi.c | 3 +- .../drm/i915/display/intel_display_types.h | 1 + drivers/gpu/drm/i915/display/intel_dp.c | 68 +++++++++++++++---- drivers/gpu/drm/i915/display/intel_dp.h | 3 +- 4 files changed, 58 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index fbc07a93504b..17eaa56c5a99 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3644,6 +3644,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, if (!is_mst) intel_dp_set_power(intel_dp, DP_SET_POWER_D0);

+ intel_dp_configure_protocol_converter(intel_dp, crtc_state); intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); /* * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit @@ -3731,7 +3732,7 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state, intel_ddi_init_dp_buf_reg(encoder, crtc_state); if (!is_mst) intel_dp_set_power(intel_dp, DP_SET_POWER_D0); - intel_dp_configure_protocol_converter(intel_dp); + intel_dp_configure_protocol_converter(intel_dp, crtc_state); intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); intel_dp_sink_set_fec_ready(intel_dp, crtc_state); diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index 4c01c7c23dfd..2009ae9e9678 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -1460,6 +1460,7 @@ struct intel_dp { int pcon_max_frl_bw; u8 max_bpc; bool ycbcr_444_to_420; + bool rgb_to_ycbcr; } dfp;

/* Display stream compression testing */ diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index abc9b772d1c8..7781245c2afe 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -651,6 +651,10 @@ intel_dp_output_format(struct drm_connector *connector, !drm_mode_is_420_only(info, mode)) return INTEL_OUTPUT_FORMAT_RGB;

+ if (intel_dp->dfp.rgb_to_ycbcr && + intel_dp->dfp.ycbcr_444_to_420) + return INTEL_OUTPUT_FORMAT_RGB; + if (intel_dp->dfp.ycbcr_444_to_420) return INTEL_OUTPUT_FORMAT_YCBCR444; else @@ -4311,7 +4315,8 @@ static void intel_dp_enable_port(struct intel_dp *intel_dp, intel_de_posting_read(dev_priv, intel_dp->output_reg); }

-void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp) +void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) { struct drm_i915_private *i915 = dp_to_i915(intel_dp); u8 tmp; @@ -4338,14 +4343,34 @@ void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp) drm_dbg_kms(&i915->drm, "Failed to set protocol converter YCbCr 4:2:0 conversion mode to %s\n", enableddisabled(intel_dp->dfp.ycbcr_444_to_420)); - - tmp = 0; - - if (drm_dp_dpcd_writeb(&intel_dp->aux, - DP_PROTOCOL_CONVERTER_CONTROL_2, tmp) <= 0) + if (intel_dp->dfp.rgb_to_ycbcr) { + bool bt2020, bt709; + + bt2020 = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, + intel_dp->downstream_ports, + DP_DS_HDMI_BT2020_RGB_YCBCR_CONV); + bt709 = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, + intel_dp->downstream_ports, + DP_DS_HDMI_BT709_RGB_YCBCR_CONV); + switch (crtc_state->infoframes.vsc.colorimetry) { + case DP_COLORIMETRY_BT2020_RGB: + case DP_COLORIMETRY_BT2020_YCC: + tmp = bt2020 ? DP_CONVERSION_BT2020_RGB_YCBCR_ENABLE : 0; + break; + case DP_COLORIMETRY_BT709_YCC: + case DP_COLORIMETRY_XVYCC_709: + tmp = bt709 ? DP_CONVERSION_BT709_RGB_YCBCR_ENABLE : 0; + break; + default: + tmp = DP_CONVERSION_BT601_RGB_YCBCR_ENABLE; + } + } else { + tmp = 0; + } + if (drm_dp_pcon_convert_rgb_to_ycbcr(&intel_dp->aux, tmp) <= 0) drm_dbg_kms(&i915->drm, - "Failed to set protocol converter YCbCr 4:2:2 conversion mode to %s\n", - enableddisabled(false)); + "Failed to set protocol converter RGB->YCbCr conversion mode to %s\n", + enableddisabled(tmp ? true : false)); }

static void intel_enable_dp(struct intel_atomic_state *state, @@ -4385,7 +4410,7 @@ static void intel_enable_dp(struct intel_atomic_state *state, }

intel_dp_set_power(intel_dp, DP_SET_POWER_D0); - intel_dp_configure_protocol_converter(intel_dp); + intel_dp_configure_protocol_converter(intel_dp, pipe_config); intel_dp_check_frl_training(intel_dp); intel_dp_pcon_dsc_configure(intel_dp, pipe_config); intel_dp_start_link_train(intel_dp, pipe_config); @@ -6853,7 +6878,7 @@ intel_dp_update_420(struct intel_dp *intel_dp) { struct drm_i915_private *i915 = dp_to_i915(intel_dp); struct intel_connector *connector = intel_dp->attached_connector; - bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420; + bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420, rgb_to_ycbcr;

/* No YCbCr output support on gmch platforms */ if (HAS_GMCH(i915)) @@ -6875,14 +6900,26 @@ intel_dp_update_420(struct intel_dp *intel_dp) dp_to_dig_port(intel_dp)->lspcon.active || drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd, intel_dp->downstream_ports); + rgb_to_ycbcr = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, + intel_dp->downstream_ports, + DP_DS_HDMI_BT601_RGB_YCBCR_CONV || + DP_DS_HDMI_BT709_RGB_YCBCR_CONV || + DP_DS_HDMI_BT2020_RGB_YCBCR_CONV);

if (INTEL_GEN(i915) >= 11) { + /* Let PCON convert from RGB->YCbCr if possible */ + if (is_branch && rgb_to_ycbcr && ycbcr_444_to_420) { + intel_dp->dfp.rgb_to_ycbcr = true; + intel_dp->dfp.ycbcr_444_to_420 = true; + connector->base.ycbcr_420_allowed = true; + } else { /* Prefer 4:2:0 passthrough over 4:4:4->4:2:0 conversion */ - intel_dp->dfp.ycbcr_444_to_420 = - ycbcr_444_to_420 && !ycbcr_420_passthrough; + intel_dp->dfp.ycbcr_444_to_420 = + ycbcr_444_to_420 && !ycbcr_420_passthrough;

- connector->base.ycbcr_420_allowed = - !is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough; + connector->base.ycbcr_420_allowed = + !is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough; + } } else { /* 4:4:4->4:2:0 conversion is the only way */ intel_dp->dfp.ycbcr_444_to_420 = ycbcr_444_to_420; @@ -6891,8 +6928,9 @@ intel_dp_update_420(struct intel_dp *intel_dp) }

drm_dbg_kms(&i915->drm, - "[CONNECTOR:%d:%s] YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", + "[CONNECTOR:%d:%s] RGB->YcbCr conversion? %s, YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", connector->base.base.id, connector->base.name, + yesno(intel_dp->dfp.rgb_to_ycbcr), yesno(connector->base.ycbcr_420_allowed), yesno(intel_dp->dfp.ycbcr_444_to_420)); } diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h index 1bfde4f89019..4280a09fd8fd 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.h +++ b/drivers/gpu/drm/i915/display/intel_dp.h @@ -51,7 +51,8 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp, int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx); void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode); -void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp); +void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state); void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, bool enable);