pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers.

Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot().

struct nvidia_par has a pointer to struct pci_dev. Use the pci_dev member to extract the domain information and pass it to pci_get_domain_bus_and_slot() function.

Signed-off-by: Sinan Kaya okaya@codeaurora.org --- drivers/video/fbdev/nvidia/nv_hw.c | 11 ++++++----- drivers/video/fbdev/nvidia/nv_setup.c | 3 ++- 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/video/fbdev/nvidia/nv_hw.c b/drivers/video/fbdev/nvidia/nv_hw.c index 81c80ac..8335da4 100644 --- a/drivers/video/fbdev/nvidia/nv_hw.c +++ b/drivers/video/fbdev/nvidia/nv_hw.c @@ -683,10 +683,11 @@ static void nForceUpdateArbitrationSettings(unsigned VClk, nv10_sim_state sim_data; unsigned int M, N, P, pll, MClk, NVClk, memctrl; struct pci_dev *dev; + int domain = pci_domain_nr(par->pci_dev->bus);

if ((par->Chipset & 0x0FF0) == 0x01A0) { unsigned int uMClkPostDiv; - dev = pci_get_bus_and_slot(0, 3); + dev = pci_get_domain_bus_and_slot(domain, 0, 3); pci_read_config_dword(dev, 0x6C, &uMClkPostDiv); uMClkPostDiv = (uMClkPostDiv >> 8) & 0xf;

@@ -694,7 +695,7 @@ static void nForceUpdateArbitrationSettings(unsigned VClk, uMClkPostDiv = 4; MClk = 400000 / uMClkPostDiv; } else { - dev = pci_get_bus_and_slot(0, 5); + dev = pci_get_domain_bus_and_slot(domain, 0, 5); pci_read_config_dword(dev, 0x4c, &MClk); MClk /= 1000; } @@ -707,13 +708,13 @@ static void nForceUpdateArbitrationSettings(unsigned VClk, sim_data.pix_bpp = (char)pixelDepth; sim_data.enable_video = 0; sim_data.enable_mp = 0; - dev = pci_get_bus_and_slot(0, 1); + dev = pci_get_domain_bus_and_slot(domain, 0, 1); pci_read_config_dword(dev, 0x7C, &sim_data.memory_type); pci_dev_put(dev); sim_data.memory_type = (sim_data.memory_type >> 12) & 1; sim_data.memory_width = 64;

- dev = pci_get_bus_and_slot(0, 3); + dev = pci_get_domain_bus_and_slot(domain, 0, 3); pci_read_config_dword(dev, 0, &memctrl); pci_dev_put(dev); memctrl >>= 16; @@ -721,7 +722,7 @@ static void nForceUpdateArbitrationSettings(unsigned VClk, if ((memctrl == 0x1A9) || (memctrl == 0x1AB) || (memctrl == 0x1ED)) { u32 dimm[3];

- dev = pci_get_bus_and_slot(0, 2); + dev = pci_get_domain_bus_and_slot(domain, 0, 2); pci_read_config_dword(dev, 0x40, &dimm[0]); dimm[0] = (dimm[0] >> 8) & 0x4f; pci_read_config_dword(dev, 0x44, &dimm[1]); diff --git a/drivers/video/fbdev/nvidia/nv_setup.c b/drivers/video/fbdev/nvidia/nv_setup.c index 2f2e162..b17acd2 100644 --- a/drivers/video/fbdev/nvidia/nv_setup.c +++ b/drivers/video/fbdev/nvidia/nv_setup.c @@ -264,7 +264,8 @@ static void nv10GetConfig(struct nvidia_par *par) } #endif

- dev = pci_get_bus_and_slot(0, 1); + dev = pci_get_domain_bus_and_slot(pci_domain_nr(par->pci_dev->bus), + 0, 1); if ((par->Chipset & 0xffff) == 0x01a0) { u32 amt;