Hi Krzysztof,

Thank you for the valuable suggestion. Sorry for sending the same email again. I forgot to reply to everyone in my last email..

Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 於 2022年6月1日 週三 上午4:15寫道：

On 31/05/2022 12:42, ChiaEn Wu wrote:

...

From: ChiaEn Wu chiaen_wu@richtek.com

Subject - remove "binding documentation". It's already implied by prefix.

...

Add Mediatek MT6370 Charger binding documentation.

Signed-off-by: ChiaEn Wu chiaen_wu@richtek.com

.../power/supply/mediatek,mt6370-charger.yaml | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml

diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml new file mode 100644 index 000000000000..9d5c4487ca9c --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#

+title: Mediatek MT6370 Battery Charger

+maintainers:

• • ChiaEn Wu chiaen_wu@richtek.com

+description: |

• This module is part of the MT6370 MFD device.
• Provides Battery Charger, Boost for OTG devices and BC1.2 detection.

+properties:

• compatible:
• const: mediatek,mt6370-charger
• interrupts:
• description: |

•  Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ
  

•  "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D"
  

•  are required.
  

• items:

•  - description: BC1.2 done irq for mt6370 charger
  

•  - description: usb plug in irq for mt6370 charger
  

•  - description: mivr irq for mt6370 charger
  

s/for mt6370 charger// in each item

I got it, this will be refined in the next version. Thanks!

...

• interrupt-names:
• items:

•  - const: attach_i
  

•  - const: uvp_d_evt
  

•  - const: mivr
  

• io-channels:
• description: |

•  Use ADC channel to read vbus, ibus, ibat, etc., info. Ibus ADC channel
  

•  is required.
  

Constraints (e.g. maxItems) are needed.

OK, I will add them in the new version!

...

• usb-otg-vbus:

Let's keep the same name as in MT6360:

usb-otg-vbus-regulator

I'll change the name to correspond with MT6360 in the next patch, thanks!

...

• type: object
• description: OTG boost regulator.
• $ref: /schemas/regulator/regulator.yaml#
• properties:

•  enable-gpio:
  

•    maxItems: 1
  

•    description: |
  

•      Specify a valid 'enable' gpio for the regulator and it's optional
  

This description is pointless - does not bring any more information. You repeat the schema. Please, avoid such descriptions.

I got it, I will remove them in the next patch.

...

+required:

• • compatible
• • interrupts
• • interrupt-names
• • io-channels

+additionalProperties: false

How about example? Or is it going to be in MFD schema?

All of MT6370 binding documentation examples are in the MFD schema! Thanks.

Best regards, Krzysztof

Best regards, ChiaEn Wu