The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags.

Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 240293592ef9..7f875bf9390a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1453,7 +1453,7 @@ mdp: mdp@c901000 { reg-names = "mdp_phys";

interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>;

assigned-clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_VSYNC_CLK>; @@ -1530,7 +1530,7 @@ dsi0: dsi@c994000 { power-domains = <&rpmpd SDM660_VDDCX>;

interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>;

assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;

The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags.

Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/sdm660.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index eccf6fde16b4..1d748c5305f4 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -163,7 +163,7 @@ dsi1: dsi@c996000 { power-domains = <&rpmpd SDM660_VDDCX>;

interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>;

assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;

The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags.

Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 41f4e46e1f85..95e6a97c2170 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4281,7 +4281,7 @@ mdss_mdp: mdp@ae01000 { power-domains = <&rpmhpd SDM845_CX>;

interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>;

ports { #address-cells = <1>; @@ -4333,7 +4333,7 @@ dsi0: dsi@ae94000 { reg-names = "dsi_ctrl";

interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>;

clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -4405,7 +4405,7 @@ dsi1: dsi@ae96000 { reg-names = "dsi_ctrl";

interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>;

clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,

The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags.

Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index fdaf303ba047..956848068871 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -3200,7 +3200,7 @@ mdss_mdp: mdp@ae01000 { power-domains = <&rpmhpd SM8250_MMCX>;

interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>;

ports { #address-cells = <1>; @@ -3252,7 +3252,7 @@ dsi0: dsi@ae94000 { reg-names = "dsi_ctrl";

interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>;

clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -3325,7 +3325,7 @@ dsi1: dsi@ae96000 { reg-names = "dsi_ctrl";

interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>;

clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,