From: Alex Deucher alexander.deucher@amd.com
Hi Dave,
A few more DPM patches and some bug fixes. Adds a sysfs interface to force dpm performance levels.
The following changes since commit 338a95a95508537e23c82d59a2d87be6fde4b6ff:
drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag (2013-07-03 17:37:31 -0400)
are available in the git repository at: git://people.freedesktop.org/~agd5f/linux drm-next-3.11
Alex Deucher (9): drm/radeon: set default clocks for SI when DPM is disabled drm/radeon: add support for 3d perf states on older asics drm/radeon: fix surface setup on r1xx drm/radeon/dpm: add infrastructure to force performance levels drm/radeon/dpm: implement force performance levels for 7xx/eg/btc drm/radeon/dpm: implement force performance level for cayman drm/radeon/dpm: implement force performance level for SI drm/radeon/dpm: implement force performance level for ON/LN drm/radeon/dpm: implement force performance level for TN
drivers/gpu/drm/radeon/btc_dpm.c | 4 +- drivers/gpu/drm/radeon/cypress_dpm.c | 4 +- drivers/gpu/drm/radeon/evergreen.c | 8 ++-- drivers/gpu/drm/radeon/ni_dpm.c | 38 ++++++++++++--- drivers/gpu/drm/radeon/ppsmc.h | 3 + drivers/gpu/drm/radeon/r100.c | 11 ++--- drivers/gpu/drm/radeon/radeon.h | 11 ++++ drivers/gpu/drm/radeon/radeon_asic.c | 7 +++ drivers/gpu/drm/radeon/radeon_asic.h | 10 ++++ drivers/gpu/drm/radeon/radeon_atombios.c | 4 ++ drivers/gpu/drm/radeon/radeon_pm.c | 77 +++++++++++++++++++++++++++--- drivers/gpu/drm/radeon/rv770_dpm.c | 31 +++++++++--- drivers/gpu/drm/radeon/rv770_dpm.h | 3 +- drivers/gpu/drm/radeon/si_dpm.c | 42 +++++++++++++---- drivers/gpu/drm/radeon/sumo_dpm.c | 44 +++++++++++++++++ drivers/gpu/drm/radeon/trinity_dpm.c | 32 ++++++++++++ drivers/gpu/drm/radeon/trinity_dpm.h | 1 + drivers/gpu/drm/radeon/trinity_smc.c | 7 +++ 18 files changed, 291 insertions(+), 46 deletions(-)
Dear Alex,
Am Freitag, den 05.07.2013, 18:24 -0400 schrieb alexdeucher@gmail.com:
[…]
The following changes since commit 338a95a95508537e23c82d59a2d87be6fde4b6ff:
drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag (2013-07-03 17:37:31 -0400)
are available in the git repository at: git://people.freedesktop.org/~agd5f/linux drm-next-3.11
trying to get your tree, Git says there are no common commits with Linus’ tree. Do you have an idea, why?
$ git describe torvalds/master v3.10-5851-gb2c3110 $ git remote add alexdeuscher git://people.freedesktop.org/~agd5f/linux $ git fetch alexdeuscher warning: no common commits […]
What do not I understand about Git? Should not there be a lot of common commits and downloading the whole tree *not* be necessary.
[…]
Thanks,
Paul
Dear Alex,
Am Samstag, den 06.07.2013, 11:48 +0200 schrieb Paul Menzel:
Am Freitag, den 05.07.2013, 18:24 -0400 schrieb alexdeucher@gmail.com:
[…]
The following changes since commit 338a95a95508537e23c82d59a2d87be6fde4b6ff:
drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag (2013-07-03 17:37:31 -0400)
are available in the git repository at: git://people.freedesktop.org/~agd5f/linux drm-next-3.11
trying to get your tree, Git says there are no common commits with Linus’ tree. Do you have an idea, why?
$ git describe torvalds/master v3.10-5851-gb2c3110 $ git remote add alexdeuscher git://people.freedesktop.org/~agd5f/linux $ git fetch alexdeuscher warning: no common commits […]What do not I understand about Git? Should not there be a lot of common commits and downloading the whole tree *not* be necessary.
thanks to olesalscheider in #radeon on <irc.freenode.net>, I should have also told Git what branch to fetch. (I did not even know that works. ;-)) So doing the following worked.
$ git fetch alexdeuscher drm-next-3.11
Thanks,
Paul
Dear Radeon folks,
Am Freitag, den 05.07.2013, 18:24 -0400 schrieb alexdeucher@gmail.com:
From: Alex Deucher alexander.deucher@amd.com
[…]
The following changes since commit 338a95a95508537e23c82d59a2d87be6fde4b6ff:
drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag (2013-07-03 17:37:31 -0400)
are available in the git repository at: git://people.freedesktop.org/~agd5f/linux drm-next-3.11
[…]
just a note that I tested that branch successfully on an ASRock E350M1 (with coreboot) and Radeon HD 6310.
Setting the performance level also seems to work.
$ echo low | sudo tee /sys/devices/pci0000:00/0000:00:01.0/power_dpm_force_performance_level low $ more /sys/devices/pci0000:00/0000:00:01.0/power_dpm_force* low
I have no idea though how to check the effects, that means if actually less power is drawn and the chip is cooler.
Thanks,
Paul
PS: Here is the output from `kern.log`.
$ cut -d " " -f 7- /var/log/kern.log # with `drm_kms_helper.poll=0 drm.debug=0x06` […] [ 53.456521] calling radeon_init+0x0/0xa1 [radeon] @ 553 [ 53.456529] [drm] radeon kernel modesetting enabled. [ 53.457682] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802). [ 53.457726] [drm] register mmio base: 0xF0100000 [ 53.457729] [drm] register mmio size: 262144 [ 53.457818] ATOM BIOS: AMD [ 53.457897] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) [ 53.457904] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF [ 53.457908] [drm] Detected VRAM RAM=384M, BAR=256M [ 53.457911] [drm] RAM width 32bits DDR [ 53.458052] [TTM] Zone kernel: Available graphics memory: 438544 kiB [ 53.458056] [TTM] Zone highmem: Available graphics memory: 1622228 kiB [ 53.458058] [TTM] Initializing pool allocator [ 53.458131] [drm] radeon: 384M of VRAM memory ready [ 53.458135] [drm] radeon: 512M of GTT memory ready. [ 53.517781] radeon 0000:00:01.0: radeon_uvd: Can't load firmware "radeon/SUMO_uvd.bin" [ 53.526154] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 53.527954] [drm] Loading PALM Microcode [ 53.556666] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 53.556903] radeon 0000:00:01.0: WB enabled [ 53.556911] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffa3dc00 [ 53.556917] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffa3dc0c [ 53.556925] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 53.556928] [drm] Driver supports precise vblank timestamp query. [ 53.556970] radeon 0000:00:01.0: irq 44 for MSI/MSI-X [ 53.556994] radeon 0000:00:01.0: radeon: using MSI. [ 53.557037] [drm] radeon: irq initialized. [ 53.573605] [drm] ring test on 0 succeeded in 1 usecs [ 53.573667] [drm] ring test on 3 succeeded in 1 usecs [ 53.573916] [drm] ib test on ring 0 succeeded in 0 usecs [ 53.573953] [drm] ib test on ring 3 succeeded in 0 usecs [ 53.574488] [drm] Radeon Display Connectors [ 53.574491] [drm] Connector 0: [ 53.574494] [drm] HDMI-A-1 [ 53.574496] [drm] HPD1 [ 53.574501] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 53.574504] [drm] Encoders: [ 53.574507] [drm] DFP1: INTERNAL_UNIPHY [ 53.574509] [drm] Connector 1: [ 53.574512] [drm] HDMI-A-2 [ 53.574514] [drm] HPD2 [ 53.574518] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 53.574520] [drm] Encoders: [ 53.574522] [drm] DFP2: INTERNAL_UNIPHY [ 53.574525] [drm] Connector 2: [ 53.574527] [drm] VGA-1 [ 53.574531] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 53.574533] [drm] Encoders: [ 53.574536] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 53.574601] [drm] Internal thermal controller without fan control [ 53.574662] == power state 0 == [ 53.574665] ui class: none [ 53.574669] internal class: uvd_hd [ 53.574672] caps: [ 53.574676] uvd vclk: 40000 dclk: 30477 [ 53.574679] power level 0 sclk: 27827 vddc: 900 [ 53.574681] status: [ 53.574684] == power state 1 == [ 53.574686] ui class: none [ 53.574688] internal class: uvd [ 53.574690] caps: [ 53.574693] uvd vclk: 53334 dclk: 40000 [ 53.574696] power level 0 sclk: 49231 vddc: 975 [ 53.574698] status: [ 53.574700] == power state 2 == [ 53.574702] ui class: performance [ 53.574704] internal class: none [ 53.574707] caps: [ 53.574710] uvd vclk: 0 dclk: 0 [ 53.574712] power level 0 sclk: 27827 vddc: 900 [ 53.574715] power level 1 sclk: 49231 vddc: 975 [ 53.574717] status: [ 53.574719] == power state 3 == [ 53.574721] ui class: none [ 53.574723] internal class: boot [ 53.574726] caps: [ 53.574728] uvd vclk: 0 dclk: 0 [ 53.574731] power level 0 sclk: 20000 vddc: 975 [ 53.574733] status: c r b [ 53.574749] == power state 4 == [ 53.574751] ui class: none [ 53.574753] internal class: thermal [ 53.574756] caps: [ 53.574758] uvd vclk: 0 dclk: 0 [ 53.574761] power level 0 sclk: 20000 vddc: 900 [ 53.574763] status: [ 53.574768] [drm] Found smc ucode version: 0x00010601 [ 53.574882] switching from power state: [ 53.574884] ui class: none [ 53.574886] internal class: boot [ 53.574889] caps: [ 53.574892] uvd vclk: 0 dclk: 0 [ 53.574895] power level 0 sclk: 20000 vddc: 975 [ 53.574896] status: c b [ 53.574900] switching to power state: [ 53.574902] ui class: performance [ 53.574904] internal class: none [ 53.574906] caps: [ 53.574909] uvd vclk: 0 dclk: 0 [ 53.574911] power level 0 sclk: 27827 vddc: 900 [ 53.574914] power level 1 sclk: 49231 vddc: 975 [ 53.574916] status: r [ 53.574977] [drm] radeon: dpm initialized [ 53.574987] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [ 53.574995] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 [ 53.575000] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 [ 53.575142] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-1] [ 53.576301] [drm:radeon_atombios_connected_scratch_regs], DFP1 disconnected [ 53.576306] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-1] disconnected [ 53.576311] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] [ 53.577457] [drm:radeon_atombios_connected_scratch_regs], DFP2 disconnected [ 53.577461] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected [ 53.577465] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:VGA-1] [ 53.611138] [drm:radeon_atombios_connected_scratch_regs], CRT1 connected [ 53.611202] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:VGA-1] probed modes : [ 53.611207] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 53.611214] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 53.611220] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 53.611226] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 53.611232] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 53.611238] [drm:drm_mode_debug_printmodeline], Modeline 34:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 53.611244] [drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 53.611250] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 53.611256] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 53.611262] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 53.611268] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 53.611274] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 53.611280] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 53.611286] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 53.611292] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 53.611298] [drm:drm_mode_debug_printmodeline], Modeline 22:"720x405" 70 26483 720 736 808 896 405 406 409 422 0x0 0x6 [ 53.611303] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 53.611309] [drm:drm_mode_debug_printmodeline], Modeline 21:"640x400" 70 23354 640 656 720 800 400 401 404 417 0x0 0x6 [ 53.611315] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x360" 70 20604 640 648 712 784 360 361 364 375 0x0 0x6 [ 53.611322] [drm:drm_setup_crtcs], [ 53.611326] [drm:drm_enable_connectors], connector 13 enabled? no [ 53.611329] [drm:drm_enable_connectors], connector 15 enabled? no [ 53.611332] [drm:drm_enable_connectors], connector 17 enabled? yes [ 53.611336] [drm:drm_target_preferred], looking for cmdline mode on connector 17 [ 53.611340] [drm:drm_target_preferred], looking for preferred mode on connector 17 [ 53.611343] [drm:drm_target_preferred], found mode 1280x1024 [ 53.611346] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 53.611352] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 10 [ 53.615661] [drm] fb mappable at 0xE0145000 [ 53.615664] [drm] vram apper at 0xE0000000 [ 53.615667] [drm] size 5242880 [ 53.615670] [drm] fb depth is 24 [ 53.615672] [drm] pitch is 5120 [ 53.615976] fbcon: radeondrmfb (fb0) is primary device [ 53.618334] [drm:drm_crtc_helper_set_config], [ 53.618338] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:39] #connectors=1 (x y) (0 0) [ 53.618351] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 53.618353] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 53.618358] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 53.618364] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 53.618367] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 53.618369] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 53.618372] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] to [CRTC:10] [ 53.618375] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 53.618380] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 53.618387] [drm:radeon_encoder_set_active_device], setting active device to 00000001 from 00000001 00000001 for encoder 4 [ 53.618404] [drm:drm_crtc_helper_set_mode], [CRTC:10] [ 53.618421] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [ 53.618427] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 [ 53.618473] [drm:radeon_compute_pll_avivo], 13500, pll dividers - fb: 21.6 ref: 2, post 8 [ 53.635317] [drm:drm_crtc_helper_set_mode], [ENCODER:16:TV-16] set [MODE:38:1280x1024] [ 53.635323] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000001 [ 53.635393] [drm:dce4_crtc_load_lut], 0 [ 53.648764] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 0, devices 00000001, active_devices 00000001 [ 53.648777] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [ 53.648784] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 [ 53.648803] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 53.648806] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] set DPMS on [ 53.648811] [drm:drm_crtc_helper_set_config], [ 53.648813] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB] [ 53.648817] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [ 53.648821] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 [ 53.648921] [drm:drm_crtc_helper_set_config], [ 53.648925] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:39] #connectors=1 (x y) (0 0) [ 53.648941] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] to [CRTC:10] [ 53.648943] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 53.648946] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] set DPMS on [ 53.648951] [drm:dce4_crtc_load_lut], 0 [ 53.648988] [drm:dce4_crtc_load_lut], 0 [ 53.661938] Console: switching to colour frame buffer device 160x64 [ 53.661946] [drm:drm_crtc_helper_set_config], [ 53.661949] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:39] #connectors=1 (x y) (0 0) [ 53.661957] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] to [CRTC:10] [ 53.661959] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 53.661962] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] set DPMS on [ 53.661965] [drm:dce4_crtc_load_lut], 0 [ 53.661999] [drm:dce4_crtc_load_lut], 0 [ 53.674948] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 53.674953] radeon 0000:00:01.0: registered panic notifier [ 53.674973] [drm:radeon_acpi_init], Call to ATCS verify_interface failed: -5 [ 53.674980] [drm:radeon_acpi_init], Call to ATIF verify_interface failed: -5 [ 53.674988] [drm] Initialized radeon 2.34.0 20080528 for 0000:00:01.0 on minor 0 [ 53.675344] initcall radeon_init+0x0/0xa1 [radeon] returned 0 after 213556 usecs […]
dri-devel@lists.freedesktop.org
-
alexdeucher＠gmail.com -
Paul Menzel