On 10/23/2014 10:16 AM, Alexandre Courbot wrote:

Add the new flags argument to calls of (devm_)gpiod_get*() and remove any direction setting code afterwards.

Currently both forms (with or without the flags argument) are valid thanks to transitional macros in <linux/gpio/consumer.h>. These macros will be removed once all consumers are updated and the flags argument will become compulsary.

Signed-off-by: Alexandre Courbot acourbot@nvidia.com

It needs patch "gpio: Fix gpio direction flags not getting set" to work correctly. It is not yet present in drm-next. Beside this:

Acked-by: Andrzej Hajda a.hajda@samsung.com

-- Regards Andrzej

---

drivers/gpu/drm/panel/panel-ld9040.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ld9040.c b/drivers/gpu/drm/panel/panel-ld9040.c index 42ac67b21e9f..dd1d3f2e624e 100644 --- a/drivers/gpu/drm/panel/panel-ld9040.c +++ b/drivers/gpu/drm/panel/panel-ld9040.c @@ -336,17 +336,12 @@ static int ld9040_probe(struct spi_device *spi) if (ret < 0) return ret;

• ctx->reset_gpio = devm_gpiod_get(dev, "reset");

• ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(ctx->reset_gpio)) { dev_err(dev, "cannot get reset-gpios %ld\n", PTR_ERR(ctx->reset_gpio)); return PTR_ERR(ctx->reset_gpio); }

• ret = gpiod_direction_output(ctx->reset_gpio, 1);

• if (ret < 0) {

• dev_err(dev, "cannot configure reset-gpios %d\n", ret);
  

• return ret;
  

• }

  spi->bits_per_word = 9; ret = spi_setup(spi);