Add error related bitfields for DLN0_PHY_ERR. These are needed by the driver when handling errors.

Signed-off-by: Archit Taneja architt@codeaurora.org --- rnndb/dsi/dsi.xml | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/rnndb/dsi/dsi.xml b/rnndb/dsi/dsi.xml index d19bea9..8aa139e 100644 --- a/rnndb/dsi/dsi.xml +++ b/rnndb/dsi/dsi.xml @@ -177,7 +177,13 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <bitfield name="TE" pos="31" type="boolean"/> </reg32> <reg32 offset="0x0008c" name="TRIG_DMA"/> - <reg32 offset="0x000b0" name="DLN0_PHY_ERR"/> + <reg32 offset="0x000b0" name="DLN0_PHY_ERR"> + <bitfield name="DLN0_ERR_ESC" pos="0" type="boolean"/> + <bitfield name="DLN0_ERR_SYNC_ESC" pos="4" type="boolean"/> + <bitfield name="DLN0_ERR_CONTROL" pos="8" type="boolean"/> + <bitfield name="DLN0_ERR_CONTENTION_LP0" pos="12" type="boolean"/> + <bitfield name="DLN0_ERR_CONTENTION_LP1" pos="16" type="boolean"/> + </reg32> <reg32 offset="0x000bc" name="TIMEOUT_STATUS"/> <reg32 offset="0x000c0" name="CLKOUT_TIMING_CTRL"> <bitfield name="T_CLK_PRE" low="0" high="5" type="uint"/>