This patch adds a little more control to a couple wait_for routines such that we can avoid open-coding read/wait/timeout patterns which: - need the value of the register after the wait_for - run arbitrary operation for the read portion

This patch also chooses the correct sleep function (based on timers-howto.txt) for the polling interval the caller specifies.

Changes in v2: - Added to the series Changes in v3: - Rebased on drm-intel-next-queued and the new Wmin/max _wait_for - Removed msleep option Changes in v4: - Removed ; for OP in _wait_for (Chris) - Moved reg_value definition above ret (Chris) Changes in v4: - checkpatch whitespace fix Changes in v5: - None Changes in v6: - None

Suggested-by: Chris Wilson chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson chris@chris-wilson.co.uk Signed-off-by: Sean Paul seanpaul@chromium.org --- drivers/gpu/drm/i915/intel_drv.h | 17 ++++++++++------- drivers/gpu/drm/i915/intel_uncore.c | 23 ++++++++++++++++------- drivers/gpu/drm/i915/intel_uncore.h | 14 +++++++++++++- 3 files changed, 39 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 30f791f89d64..9848e8eb0074 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -41,20 +41,21 @@ #include <drm/drm_atomic.h>

/** - * _wait_for - magic (register) wait macro + * __wait_for - magic wait macro * - * Does the right thing for modeset paths when run under kdgb or similar atomic - * contexts. Note that it's important that we check the condition again after - * having timed out, since the timeout could be due to preemption or similar and - * we've never had a chance to check the condition before the timeout. + * Macro to help avoid open coding check/wait/timeout patterns. Note that it's + * important that we check the condition again after having timed out, since the + * timeout could be due to preemption or similar and we've never had a chance to + * check the condition before the timeout. */ -#define _wait_for(COND, US, Wmin, Wmax) ({ \ +#define __wait_for(OP, COND, US, Wmin, Wmax) ({ \ unsigned long timeout__ = jiffies + usecs_to_jiffies(US) + 1; \ long wait__ = (Wmin); /* recommended min for usleep is 10 us */ \ int ret__; \ might_sleep(); \ for (;;) { \ bool expired__ = time_after(jiffies, timeout__); \ + OP; \ if (COND) { \ ret__ = 0; \ break; \ @@ -70,7 +71,9 @@ ret__; \ })

-#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 10, 1000) +#define _wait_for(COND, US, Wmin, Wmax) __wait_for(, (COND), (US), (Wmin), \ + (Wmax)) +#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 10, 1000)

/* If CONFIG_PREEMPT_COUNT is disabled, in_atomic() always reports false. */ #if defined(CONFIG_DRM_I915_DEBUG) && defined(CONFIG_PREEMPT_COUNT) diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c index 94e1fb3a2936..1c524ed1e1da 100644 --- a/drivers/gpu/drm/i915/intel_uncore.c +++ b/drivers/gpu/drm/i915/intel_uncore.c @@ -1767,12 +1767,14 @@ int __intel_wait_for_register_fw(struct drm_i915_private *dev_priv, }

/** - * intel_wait_for_register - wait until register matches expected state + * __intel_wait_for_register - wait until register matches expected state * @dev_priv: the i915 device * @reg: the register to read * @mask: mask to apply to register value * @value: expected value - * @timeout_ms: timeout in millisecond + * @fast_timeout_us: fast timeout in microsecond for atomic/tight wait + * @slow_timeout_ms: slow timeout in millisecond + * @out_value: optional placeholder to hold registry value * * This routine waits until the target register @reg contains the expected * @value after applying the @mask, i.e. it waits until :: @@ -1783,14 +1785,17 @@ int __intel_wait_for_register_fw(struct drm_i915_private *dev_priv, * * Returns 0 if the register matches the desired condition, or -ETIMEOUT. */ -int intel_wait_for_register(struct drm_i915_private *dev_priv, +int __intel_wait_for_register(struct drm_i915_private *dev_priv, i915_reg_t reg, u32 mask, u32 value, - unsigned int timeout_ms) + unsigned int fast_timeout_us, + unsigned int slow_timeout_ms, + u32 *out_value) { unsigned fw = intel_uncore_forcewake_for_reg(dev_priv, reg, FW_REG_READ); + u32 reg_value; int ret;

might_sleep(); @@ -1800,14 +1805,18 @@ int intel_wait_for_register(struct drm_i915_private *dev_priv,

ret = __intel_wait_for_register_fw(dev_priv, reg, mask, value, - 2, 0, NULL); + fast_timeout_us, 0, &reg_value);

intel_uncore_forcewake_put__locked(dev_priv, fw); spin_unlock_irq(&dev_priv->uncore.lock);

if (ret) - ret = wait_for((I915_READ_NOTRACE(reg) & mask) == value, - timeout_ms); + ret = __wait_for(reg_value = I915_READ_NOTRACE(reg), + (reg_value & mask) == value, + slow_timeout_ms * 1000, 10, 1000); + + if (out_value) + *out_value = reg_value;

return ret; } diff --git a/drivers/gpu/drm/i915/intel_uncore.h b/drivers/gpu/drm/i915/intel_uncore.h index 9ce079b5dd0d..bed019ef000f 100644 --- a/drivers/gpu/drm/i915/intel_uncore.h +++ b/drivers/gpu/drm/i915/intel_uncore.h @@ -163,11 +163,23 @@ void intel_uncore_forcewake_put__locked(struct drm_i915_private *dev_priv, void intel_uncore_forcewake_user_get(struct drm_i915_private *dev_priv); void intel_uncore_forcewake_user_put(struct drm_i915_private *dev_priv);

+int __intel_wait_for_register(struct drm_i915_private *dev_priv, + i915_reg_t reg, + u32 mask, + u32 value, + unsigned int fast_timeout_us, + unsigned int slow_timeout_ms, + u32 *out_value); +static inline int intel_wait_for_register(struct drm_i915_private *dev_priv, i915_reg_t reg, u32 mask, u32 value, - unsigned int timeout_ms); + unsigned int timeout_ms) +{ + return __intel_wait_for_register(dev_priv, reg, mask, value, 2, + timeout_ms, NULL); +} int __intel_wait_for_register_fw(struct drm_i915_private *dev_priv, i915_reg_t reg, u32 mask,

In preparation for implementing HDCP in i915, add some HDCP related register offsets and defines. The dpcd register offsets will go in drm_dp_helper.h whereas the ddc offsets along with generic HDCP stuff will get stuffed in drm_hdcp.h, which is new.

Changes in v2: - drm_hdcp.h gets MIT license (Daniel) Changes in v3: - None Changes in v4: - None Changes in v5: - None Changes in v6: - SPDX license

Cc: Daniel Vetter daniel.vetter@intel.com Reviewed-by: Ramalingam C ramalingm.c@intel.com Signed-off-by: Sean Paul seanpaul@chromium.org --- include/drm/drm_dp_helper.h | 17 +++++++++++++++++ include/drm/drm_hdcp.h | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+) create mode 100644 include/drm/drm_hdcp.h

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index da58a428c8d7..9d3ce3b9b121 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -836,6 +836,23 @@ #define DP_CEC_TX_MESSAGE_BUFFER 0x3020 #define DP_CEC_MESSAGE_BUFFER_LENGTH 0x10

+#define DP_AUX_HDCP_BKSV 0x68000 +#define DP_AUX_HDCP_RI_PRIME 0x68005 +#define DP_AUX_HDCP_AKSV 0x68007 +#define DP_AUX_HDCP_AN 0x6800C +#define DP_AUX_HDCP_V_PRIME(h) (0x68014 + h * 4) +#define DP_AUX_HDCP_BCAPS 0x68028 +# define DP_BCAPS_REPEATER_PRESENT BIT(1) +# define DP_BCAPS_HDCP_CAPABLE BIT(0) +#define DP_AUX_HDCP_BSTATUS 0x68029 +# define DP_BSTATUS_REAUTH_REQ BIT(3) +# define DP_BSTATUS_LINK_FAILURE BIT(2) +# define DP_BSTATUS_R0_PRIME_READY BIT(1) +# define DP_BSTATUS_READY BIT(0) +#define DP_AUX_HDCP_BINFO 0x6802A +#define DP_AUX_HDCP_KSV_FIFO 0x6802C +#define DP_AUX_HDCP_AINFO 0x6803B + /* DP 1.2 Sideband message defines */ /* peer device type - DP 1.2a Table 2-92 */ #define DP_PEER_DEVICE_NONE 0x0 diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h new file mode 100644 index 000000000000..43f7bd902b41 --- /dev/null +++ b/include/drm/drm_hdcp.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: MIT */ +/* + * Copyright (C) 2017 Google, Inc. + * + * Authors: + * Sean Paul seanpaul@chromium.org + */ + +#ifndef _DRM_HDCP_H_INCLUDED_ +#define _DRM_HDCP_H_INCLUDED_ + +/* Period of hdcp checks (to ensure we're still authenticated) */ +#define DRM_HDCP_CHECK_PERIOD_MS (128 * 16) + +/* Shared lengths/masks between HDMI/DVI/DisplayPort */ +#define DRM_HDCP_AN_LEN 8 +#define DRM_HDCP_BSTATUS_LEN 2 +#define DRM_HDCP_KSV_LEN 5 +#define DRM_HDCP_RI_LEN 2 +#define DRM_HDCP_V_PRIME_PART_LEN 4 +#define DRM_HDCP_V_PRIME_NUM_PARTS 5 +#define DRM_HDCP_NUM_DOWNSTREAM(x) (x & 0x3f) + +/* Slave address for the HDCP registers in the receiver */ +#define DRM_HDCP_DDC_ADDR 0x3A + +/* HDCP register offsets for HDMI/DVI devices */ +#define DRM_HDCP_DDC_BKSV 0x00 +#define DRM_HDCP_DDC_RI_PRIME 0x08 +#define DRM_HDCP_DDC_AKSV 0x10 +#define DRM_HDCP_DDC_AN 0x18 +#define DRM_HDCP_DDC_V_PRIME(h) (0x20 + h * 4) +#define DRM_HDCP_DDC_BCAPS 0x40 +#define DRM_HDCP_DDC_BCAPS_REPEATER_PRESENT BIT(6) +#define DRM_HDCP_DDC_BCAPS_KSV_FIFO_READY BIT(5) +#define DRM_HDCP_DDC_BSTATUS 0x41 +#define DRM_HDCP_DDC_KSV_FIFO 0x43 + +#endif

This patch adds the framework required to add HDCP support to intel connectors. It implements Aksv loading from fuse, and parts 1/2/3 of the HDCP authentication scheme.

Note that without shim implementations, this does not actually implement HDCP. That will come in subsequent patches.

Changes in v2: - Don't open code wait_fors (Chris) - drm_hdcp.c under MIT license (Daniel) - Move intel_hdcp_disable() call above ddi_disable (Ram) - Fix // comments (I wore a cone of shame for 12 hours to atone) (Daniel) - Justify intel_hdcp_shim with comments (Daniel) - Fixed async locking issues by adding hdcp_mutex (Daniel) - Don't alter connector_state in enable/disable (Daniel) Changes in v3: - Added hdcp_mutex/hdcp_value to make async reasonable - Added hdcp_prop_work to separate link checking & property setting - Added new helper for atomic_check state tracking (Daniel) - Moved enable/disable into atomic_commit with matching helpers - Moved intel_hdcp_check_link out of all locks when called from dp - Bumped up ksv_fifo timeout (noticed failure on one of my dongles) Changes in v4: - Remove SKL_ prefix from most register names (Daniel) - Move enable/disable back to modeset path (Daniel) - s/get_random_long/get_random_u32/ (Daniel) - Remove mode_config.mutex lock in prop_work (Daniel) - Add intel_hdcp_init to handle init of conn components (Daniel) - Actually check return value of attach_property - Check Bksv is valid before trying to authenticate (Ram) Changes in v5: - checkpatch whitespace changes - s/DRM_MODE_CONTENT_PROTECTION_OFF/DRM_MODE_CONTENT_PROTECTION_UNDESIRED/ - Fix ksv list wait timeout (actually wait 5s) - Increase the R0 timeout to 300ms (Ram) Changes in v6: - SPDX license

Cc: Chris Wilson chris@chris-wilson.co.uk Reviewed-by: Ramalingam C ramalingm.c@intel.com Reviewed-by: Daniel Vetter daniel.vetter@ffwll.ch Signed-off-by: Sean Paul seanpaul@chromium.org --- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/i915_reg.h | 83 ++++ drivers/gpu/drm/i915/intel_atomic.c | 2 + drivers/gpu/drm/i915/intel_ddi.c | 7 + drivers/gpu/drm/i915/intel_display.c | 4 + drivers/gpu/drm/i915/intel_drv.h | 85 ++++ drivers/gpu/drm/i915/intel_hdcp.c | 723 +++++++++++++++++++++++++++++++++++ 7 files changed, 905 insertions(+) create mode 100644 drivers/gpu/drm/i915/intel_hdcp.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 4d9e2f855e9d..3bddd8a06806 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -109,6 +109,7 @@ i915-y += intel_audio.o \ intel_fbc.o \ intel_fifo_underrun.o \ intel_frontbuffer.o \ + intel_hdcp.o \ intel_hotplug.o \ intel_modes.o \ intel_overlay.o \ diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 505c605eff98..5db8d18c73ab 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -8046,6 +8046,7 @@ enum { #define GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT 8 #define GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT 16 #define GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT 24 +#define SKL_PCODE_LOAD_HDCP_KEYS 0x5 #define SKL_PCODE_CDCLK_CONTROL 0x7 #define SKL_CDCLK_PREPARE_FOR_CHANGE 0x3 #define SKL_CDCLK_READY_FOR_CHANGE 0x1 @@ -8348,6 +8349,88 @@ enum skl_power_gate { #define SKL_PW_TO_PG(pw) ((pw) - SKL_DISP_PW_1 + SKL_PG1) #define SKL_FUSE_PG_DIST_STATUS(pg) (1 << (27 - (pg)))

+ +/* HDCP Key Registers */ +#define HDCP_KEY_CONF _MMIO(0x66c00) +#define HDCP_AKSV_SEND_TRIGGER BIT(31) +#define HDCP_CLEAR_KEYS_TRIGGER BIT(30) +#define HDCP_KEY_STATUS _MMIO(0x66c04) +#define HDCP_FUSE_IN_PROGRESS BIT(7) +#define HDCP_FUSE_ERROR BIT(6) +#define HDCP_FUSE_DONE BIT(5) +#define HDCP_KEY_LOAD_STATUS BIT(1) +#define HDCP_KEY_LOAD_DONE BIT(0) +#define HDCP_AKSV_LO _MMIO(0x66c10) +#define HDCP_AKSV_HI _MMIO(0x66c14) + +/* HDCP Repeater Registers */ +#define HDCP_REP_CTL _MMIO(0x66d00) +#define HDCP_DDIB_REP_PRESENT BIT(30) +#define HDCP_DDIA_REP_PRESENT BIT(29) +#define HDCP_DDIC_REP_PRESENT BIT(28) +#define HDCP_DDID_REP_PRESENT BIT(27) +#define HDCP_DDIF_REP_PRESENT BIT(26) +#define HDCP_DDIE_REP_PRESENT BIT(25) +#define HDCP_DDIB_SHA1_M0 (1 << 20) +#define HDCP_DDIA_SHA1_M0 (2 << 20) +#define HDCP_DDIC_SHA1_M0 (3 << 20) +#define HDCP_DDID_SHA1_M0 (4 << 20) +#define HDCP_DDIF_SHA1_M0 (5 << 20) +#define HDCP_DDIE_SHA1_M0 (6 << 20) /* Bspec says 5? */ +#define HDCP_SHA1_BUSY BIT(16) +#define HDCP_SHA1_READY BIT(17) +#define HDCP_SHA1_COMPLETE BIT(18) +#define HDCP_SHA1_V_MATCH BIT(19) +#define HDCP_SHA1_TEXT_32 (1 << 1) +#define HDCP_SHA1_COMPLETE_HASH (2 << 1) +#define HDCP_SHA1_TEXT_24 (4 << 1) +#define HDCP_SHA1_TEXT_16 (5 << 1) +#define HDCP_SHA1_TEXT_8 (6 << 1) +#define HDCP_SHA1_TEXT_0 (7 << 1) +#define HDCP_SHA_V_PRIME_H0 _MMIO(0x66d04) +#define HDCP_SHA_V_PRIME_H1 _MMIO(0x66d08) +#define HDCP_SHA_V_PRIME_H2 _MMIO(0x66d0C) +#define HDCP_SHA_V_PRIME_H3 _MMIO(0x66d10) +#define HDCP_SHA_V_PRIME_H4 _MMIO(0x66d14) +#define HDCP_SHA_V_PRIME(h) _MMIO((0x66d04 + h * 4)) +#define HDCP_SHA_TEXT _MMIO(0x66d18) + +/* HDCP Auth Registers */ +#define _PORTA_HDCP_AUTHENC 0x66800 +#define _PORTB_HDCP_AUTHENC 0x66500 +#define _PORTC_HDCP_AUTHENC 0x66600 +#define _PORTD_HDCP_AUTHENC 0x66700 +#define _PORTE_HDCP_AUTHENC 0x66A00 +#define _PORTF_HDCP_AUTHENC 0x66900 +#define _PORT_HDCP_AUTHENC(port, x) _MMIO(_PICK(port, \ + _PORTA_HDCP_AUTHENC, \ + _PORTB_HDCP_AUTHENC, \ + _PORTC_HDCP_AUTHENC, \ + _PORTD_HDCP_AUTHENC, \ + _PORTE_HDCP_AUTHENC, \ + _PORTF_HDCP_AUTHENC) + x) +#define PORT_HDCP_CONF(port) _PORT_HDCP_AUTHENC(port, 0x0) +#define HDCP_CONF_CAPTURE_AN BIT(0) +#define HDCP_CONF_AUTH_AND_ENC (BIT(1) | BIT(0)) +#define PORT_HDCP_ANINIT(port) _PORT_HDCP_AUTHENC(port, 0x4) +#define PORT_HDCP_ANLO(port) _PORT_HDCP_AUTHENC(port, 0x8) +#define PORT_HDCP_ANHI(port) _PORT_HDCP_AUTHENC(port, 0xC) +#define PORT_HDCP_BKSVLO(port) _PORT_HDCP_AUTHENC(port, 0x10) +#define PORT_HDCP_BKSVHI(port) _PORT_HDCP_AUTHENC(port, 0x14) +#define PORT_HDCP_RPRIME(port) _PORT_HDCP_AUTHENC(port, 0x18) +#define PORT_HDCP_STATUS(port) _PORT_HDCP_AUTHENC(port, 0x1C) +#define HDCP_STATUS_STREAM_A_ENC BIT(31) +#define HDCP_STATUS_STREAM_B_ENC BIT(30) +#define HDCP_STATUS_STREAM_C_ENC BIT(29) +#define HDCP_STATUS_STREAM_D_ENC BIT(28) +#define HDCP_STATUS_AUTH BIT(21) +#define HDCP_STATUS_ENC BIT(20) +#define HDCP_STATUS_RI_MATCH BIT(19) +#define HDCP_STATUS_R0_READY BIT(18) +#define HDCP_STATUS_AN_READY BIT(17) +#define HDCP_STATUS_CIPHER BIT(16) +#define HDCP_STATUS_FRAME_CNT(x) ((x >> 8) & 0xff) + /* Per-pipe DDI Function Control */ #define _TRANS_DDI_FUNC_CTL_A 0x60400 #define _TRANS_DDI_FUNC_CTL_B 0x61400 diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c index 36d4e635e4ce..d452c327dc1d 100644 --- a/drivers/gpu/drm/i915/intel_atomic.c +++ b/drivers/gpu/drm/i915/intel_atomic.c @@ -110,6 +110,8 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn, to_intel_digital_connector_state(old_state); struct drm_crtc_state *crtc_state;

+ intel_hdcp_atomic_check(conn, old_state, new_state); + if (!new_state->crtc) return 0;

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index f51645a08dca..2766b5e5c0ac 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -2423,6 +2423,11 @@ static void intel_enable_ddi(struct intel_encoder *encoder, intel_enable_ddi_hdmi(encoder, crtc_state, conn_state); else intel_enable_ddi_dp(encoder, crtc_state, conn_state); + + /* Enable hdcp if it's desired */ + if (conn_state->content_protection == + DRM_MODE_CONTENT_PROTECTION_DESIRED) + intel_hdcp_enable(to_intel_connector(conn_state->connector)); }

static void intel_disable_ddi_dp(struct intel_encoder *encoder, @@ -2457,6 +2462,8 @@ static void intel_disable_ddi(struct intel_encoder *encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state) { + intel_hdcp_disable(to_intel_connector(old_conn_state->connector)); + if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI)) intel_disable_ddi_hdmi(encoder, old_crtc_state, old_conn_state); else diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0cd355978ab4..02bf31d935b4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -15217,6 +15217,10 @@ static void intel_hpd_poll_fini(struct drm_device *dev) for_each_intel_connector_iter(connector, &conn_iter) { if (connector->modeset_retry_work.func) cancel_work_sync(&connector->modeset_retry_work); + if (connector->hdcp_shim) { + cancel_delayed_work_sync(&connector->hdcp_check_work); + cancel_work_sync(&connector->hdcp_prop_work); + } } drm_connector_list_iter_end(&conn_iter); } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 9848e8eb0074..c59277c5b63e 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -301,6 +301,76 @@ struct intel_panel { } backlight; };

+/* + * This structure serves as a translation layer between the generic HDCP code + * and the bus-specific code. What that means is that HDCP over HDMI differs + * from HDCP over DP, so to account for these differences, we need to + * communicate with the receiver through this shim. + * + * For completeness, the 2 buses differ in the following ways: + * - DP AUX vs. DDC + * HDCP registers on the receiver are set via DP AUX for DP, and + * they are set via DDC for HDMI. + * - Receiver register offsets + * The offsets of the registers are different for DP vs. HDMI + * - Receiver register masks/offsets + * For instance, the ready bit for the KSV fifo is in a different + * place on DP vs HDMI + * - Receiver register names + * Seriously. In the DP spec, the 16-bit register containing + * downstream information is called BINFO, on HDMI it's called + * BSTATUS. To confuse matters further, DP has a BSTATUS register + * with a completely different definition. + * - KSV FIFO + * On HDMI, the ksv fifo is read all at once, whereas on DP it must + * be read 3 keys at a time + * - Aksv output + * Since Aksv is hidden in hardware, there's different procedures + * to send it over DP AUX vs DDC + */ +struct intel_hdcp_shim { + /* Outputs the transmitter's An and Aksv values to the receiver. */ + int (*write_an_aksv)(struct intel_digital_port *intel_dig_port, u8 *an); + + /* Reads the receiver's key selection vector */ + int (*read_bksv)(struct intel_digital_port *intel_dig_port, u8 *bksv); + + /* + * Reads BINFO from DP receivers and BSTATUS from HDMI receivers. The + * definitions are the same in the respective specs, but the names are + * different. Call it BSTATUS since that's the name the HDMI spec + * uses and it was there first. + */ + int (*read_bstatus)(struct intel_digital_port *intel_dig_port, + u8 *bstatus); + + /* Determines whether a repeater is present downstream */ + int (*repeater_present)(struct intel_digital_port *intel_dig_port, + bool *repeater_present); + + /* Reads the receiver's Ri' value */ + int (*read_ri_prime)(struct intel_digital_port *intel_dig_port, u8 *ri); + + /* Determines if the receiver's KSV FIFO is ready for consumption */ + int (*read_ksv_ready)(struct intel_digital_port *intel_dig_port, + bool *ksv_ready); + + /* Reads the ksv fifo for num_downstream devices */ + int (*read_ksv_fifo)(struct intel_digital_port *intel_dig_port, + int num_downstream, u8 *ksv_fifo); + + /* Reads a 32-bit part of V' from the receiver */ + int (*read_v_prime_part)(struct intel_digital_port *intel_dig_port, + int i, u32 *part); + + /* Enables HDCP signalling on the port */ + int (*toggle_signalling)(struct intel_digital_port *intel_dig_port, + bool enable); + + /* Ensures the link is still protected */ + bool (*check_link)(struct intel_digital_port *intel_dig_port); +}; + struct intel_connector { struct drm_connector base; /* @@ -332,6 +402,12 @@ struct intel_connector {

/* Work struct to schedule a uevent on link train failure */ struct work_struct modeset_retry_work; + + const struct intel_hdcp_shim *hdcp_shim; + struct mutex hdcp_mutex; + uint64_t hdcp_value; /* protected by hdcp_mutex */ + struct delayed_work hdcp_check_work; + struct work_struct hdcp_prop_work; };

struct intel_digital_connector_state { @@ -1761,6 +1837,15 @@ static inline void intel_backlight_device_unregister(struct intel_connector *con } #endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */

+/* intel_hdcp.c */ +void intel_hdcp_atomic_check(struct drm_connector *connector, + struct drm_connector_state *old_state, + struct drm_connector_state *new_state); +int intel_hdcp_init(struct intel_connector *connector, + const struct intel_hdcp_shim *hdcp_shim); +int intel_hdcp_enable(struct intel_connector *connector); +int intel_hdcp_disable(struct intel_connector *connector); +int intel_hdcp_check_link(struct intel_connector *connector);

/* intel_psr.c */ void intel_psr_enable(struct intel_dp *intel_dp, diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c new file mode 100644 index 000000000000..3c164a27d50b --- /dev/null +++ b/drivers/gpu/drm/i915/intel_hdcp.c @@ -0,0 +1,723 @@ +/* SPDX-License-Identifier: MIT */ +/* + * Copyright (C) 2017 Google, Inc. + * + * Authors: + * Sean Paul seanpaul@chromium.org + */ + +#include <drm/drmP.h> +#include <drm/drm_hdcp.h> +#include <linux/i2c.h> +#include <linux/random.h> + +#include "intel_drv.h" +#include "i915_reg.h" + +#define KEY_LOAD_TRIES 5 + +static int intel_hdcp_poll_ksv_fifo(struct intel_digital_port *intel_dig_port, + const struct intel_hdcp_shim *shim) +{ + int ret, read_ret; + bool ksv_ready; + + /* Poll for ksv list ready (spec says max time allowed is 5s) */ + ret = __wait_for(read_ret = shim->read_ksv_ready(intel_dig_port, + &ksv_ready), + read_ret || ksv_ready, 5 * 1000 * 1000, 1000, + 100 * 1000); + if (ret) + return ret; + if (read_ret) + return read_ret; + if (!ksv_ready) + return -ETIMEDOUT; + + return 0; +} + +static void intel_hdcp_clear_keys(struct drm_i915_private *dev_priv) +{ + I915_WRITE(HDCP_KEY_CONF, HDCP_CLEAR_KEYS_TRIGGER); + I915_WRITE(HDCP_KEY_STATUS, HDCP_KEY_LOAD_DONE | HDCP_KEY_LOAD_STATUS | + HDCP_FUSE_IN_PROGRESS | HDCP_FUSE_ERROR | HDCP_FUSE_DONE); +} + +static int intel_hdcp_load_keys(struct drm_i915_private *dev_priv) +{ + int ret; + u32 val; + + /* Initiate loading the HDCP key from fuses */ + mutex_lock(&dev_priv->pcu_lock); + ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_LOAD_HDCP_KEYS, 1); + mutex_unlock(&dev_priv->pcu_lock); + if (ret) { + DRM_ERROR("Failed to initiate HDCP key load (%d)\n", ret); + return ret; + } + + /* Wait for the keys to load (500us) */ + ret = __intel_wait_for_register(dev_priv, HDCP_KEY_STATUS, + HDCP_KEY_LOAD_DONE, HDCP_KEY_LOAD_DONE, + 10, 1, &val); + if (ret) + return ret; + else if (!(val & HDCP_KEY_LOAD_STATUS)) + return -ENXIO; + + /* Send Aksv over to PCH display for use in authentication */ + I915_WRITE(HDCP_KEY_CONF, HDCP_AKSV_SEND_TRIGGER); + + return 0; +} + +/* Returns updated SHA-1 index */ +static int intel_write_sha_text(struct drm_i915_private *dev_priv, u32 sha_text) +{ + I915_WRITE(HDCP_SHA_TEXT, sha_text); + if (intel_wait_for_register(dev_priv, HDCP_REP_CTL, + HDCP_SHA1_READY, HDCP_SHA1_READY, 1)) { + DRM_ERROR("Timed out waiting for SHA1 ready\n"); + return -ETIMEDOUT; + } + return 0; +} + +static +u32 intel_hdcp_get_repeater_ctl(struct intel_digital_port *intel_dig_port) +{ + enum port port = intel_dig_port->base.port; + switch (port) { + case PORT_A: + return HDCP_DDIA_REP_PRESENT | HDCP_DDIA_SHA1_M0; + case PORT_B: + return HDCP_DDIB_REP_PRESENT | HDCP_DDIB_SHA1_M0; + case PORT_C: + return HDCP_DDIC_REP_PRESENT | HDCP_DDIC_SHA1_M0; + case PORT_D: + return HDCP_DDID_REP_PRESENT | HDCP_DDID_SHA1_M0; + case PORT_E: + return HDCP_DDIE_REP_PRESENT | HDCP_DDIE_SHA1_M0; + default: + break; + } + DRM_ERROR("Unknown port %d\n", port); + return -EINVAL; +} + +static +bool intel_hdcp_is_ksv_valid(u8 *ksv) +{ + int i, ones = 0; + /* KSV has 20 1's and 20 0's */ + for (i = 0; i < DRM_HDCP_KSV_LEN; i++) + ones += hweight8(ksv[i]); + if (ones != 20) + return false; + return true; +} + +/* Implements Part 2 of the HDCP authorization procedure */ +static +int intel_hdcp_auth_downstream(struct intel_digital_port *intel_dig_port, + const struct intel_hdcp_shim *shim) +{ + struct drm_i915_private *dev_priv; + u32 vprime, sha_text, sha_leftovers, rep_ctl; + u8 bstatus[2], num_downstream, *ksv_fifo; + int ret, i, j, sha_idx; + + dev_priv = intel_dig_port->base.base.dev->dev_private; + + ret = shim->read_bstatus(intel_dig_port, bstatus); + if (ret) + return ret; + + /* If there are no downstream devices, we're all done. */ + num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]); + if (num_downstream == 0) { + DRM_INFO("HDCP is enabled (no downstream devices)\n"); + return 0; + } + + ret = intel_hdcp_poll_ksv_fifo(intel_dig_port, shim); + if (ret) { + DRM_ERROR("KSV list failed to become ready (%d)\n", ret); + return ret; + } + + ksv_fifo = kzalloc(num_downstream * DRM_HDCP_KSV_LEN, GFP_KERNEL); + if (!ksv_fifo) + return -ENOMEM; + + ret = shim->read_ksv_fifo(intel_dig_port, num_downstream, ksv_fifo); + if (ret) + return ret; + + /* Process V' values from the receiver */ + for (i = 0; i < DRM_HDCP_V_PRIME_NUM_PARTS; i++) { + ret = shim->read_v_prime_part(intel_dig_port, i, &vprime); + if (ret) + return ret; + I915_WRITE(HDCP_SHA_V_PRIME(i), vprime); + } + + /* + * We need to write the concatenation of all device KSVs, BINFO (DP) || + * BSTATUS (HDMI), and M0 (which is added via HDCP_REP_CTL). This byte + * stream is written via the HDCP_SHA_TEXT register in 32-bit + * increments. Every 64 bytes, we need to write HDCP_REP_CTL again. This + * index will keep track of our progress through the 64 bytes as well as + * helping us work the 40-bit KSVs through our 32-bit register. + * + * NOTE: data passed via HDCP_SHA_TEXT should be big-endian + */ + sha_idx = 0; + sha_text = 0; + sha_leftovers = 0; + rep_ctl = intel_hdcp_get_repeater_ctl(intel_dig_port); + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); + for (i = 0; i < num_downstream; i++) { + unsigned int sha_empty; + u8 *ksv = &ksv_fifo[i * DRM_HDCP_KSV_LEN]; + + /* Fill up the empty slots in sha_text and write it out */ + sha_empty = sizeof(sha_text) - sha_leftovers; + for (j = 0; j < sha_empty; j++) + sha_text |= ksv[j] << ((sizeof(sha_text) - j - 1) * 8); + + ret = intel_write_sha_text(dev_priv, sha_text); + if (ret < 0) + return ret; + + /* Programming guide writes this every 64 bytes */ + sha_idx += sizeof(sha_text); + if (!(sha_idx % 64)) + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); + + /* Store the leftover bytes from the ksv in sha_text */ + sha_leftovers = DRM_HDCP_KSV_LEN - sha_empty; + sha_text = 0; + for (j = 0; j < sha_leftovers; j++) + sha_text |= ksv[sha_empty + j] << + ((sizeof(sha_text) - j - 1) * 8); + + /* + * If we still have room in sha_text for more data, continue. + * Otherwise, write it out immediately. + */ + if (sizeof(sha_text) > sha_leftovers) + continue; + + ret = intel_write_sha_text(dev_priv, sha_text); + if (ret < 0) + return ret; + sha_leftovers = 0; + sha_text = 0; + sha_idx += sizeof(sha_text); + } + + /* + * We need to write BINFO/BSTATUS, and M0 now. Depending on how many + * bytes are leftover from the last ksv, we might be able to fit them + * all in sha_text (first 2 cases), or we might need to split them up + * into 2 writes (last 2 cases). + */ + if (sha_leftovers == 0) { + /* Write 16 bits of text, 16 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_16); + ret = intel_write_sha_text(dev_priv, + bstatus[0] << 8 | bstatus[1]); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + /* Write 32 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0); + ret = intel_write_sha_text(dev_priv, 0); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + /* Write 16 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_16); + ret = intel_write_sha_text(dev_priv, 0); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + } else if (sha_leftovers == 1) { + /* Write 24 bits of text, 8 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_24); + sha_text |= bstatus[0] << 16 | bstatus[1] << 8; + /* Only 24-bits of data, must be in the LSB */ + sha_text = (sha_text & 0xffffff00) >> 8; + ret = intel_write_sha_text(dev_priv, sha_text); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + /* Write 32 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0); + ret = intel_write_sha_text(dev_priv, 0); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + /* Write 24 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_8); + ret = intel_write_sha_text(dev_priv, 0); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + } else if (sha_leftovers == 2) { + /* Write 32 bits of text */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); + sha_text |= bstatus[0] << 24 | bstatus[1] << 16; + ret = intel_write_sha_text(dev_priv, sha_text); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + /* Write 64 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0); + for (i = 0; i < 2; i++) { + ret = intel_write_sha_text(dev_priv, 0); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + } + } else if (sha_leftovers == 3) { + /* Write 32 bits of text */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); + sha_text |= bstatus[0] << 24; + ret = intel_write_sha_text(dev_priv, sha_text); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + /* Write 8 bits of text, 24 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_8); + ret = intel_write_sha_text(dev_priv, bstatus[1]); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + /* Write 32 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_0); + ret = intel_write_sha_text(dev_priv, 0); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + + /* Write 8 bits of M0 */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_24); + ret = intel_write_sha_text(dev_priv, 0); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + } else { + DRM_ERROR("Invalid number of leftovers %d\n", sha_leftovers); + return -EINVAL; + } + + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); + /* Fill up to 64-4 bytes with zeros (leave the last write for length) */ + while ((sha_idx % 64) < (64 - sizeof(sha_text))) { + ret = intel_write_sha_text(dev_priv, 0); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); + } + + /* + * Last write gets the length of the concatenation in bits. That is: + * - 5 bytes per device + * - 10 bytes for BINFO/BSTATUS(2), M0(8) + */ + sha_text = (num_downstream * 5 + 10) * 8; + ret = intel_write_sha_text(dev_priv, sha_text); + if (ret < 0) + return ret; + + /* Tell the HW we're done with the hash and wait for it to ACK */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_COMPLETE_HASH); + if (intel_wait_for_register(dev_priv, HDCP_REP_CTL, + HDCP_SHA1_COMPLETE, + HDCP_SHA1_COMPLETE, 1)) { + DRM_ERROR("Timed out waiting for SHA1 complete\n"); + return -ETIMEDOUT; + } + if (!(I915_READ(HDCP_REP_CTL) & HDCP_SHA1_V_MATCH)) { + DRM_ERROR("SHA-1 mismatch, HDCP failed\n"); + return -ENXIO; + } + + DRM_INFO("HDCP is enabled (%d downstream devices)\n", num_downstream); + return 0; +} + +/* Implements Part 1 of the HDCP authorization procedure */ +static int intel_hdcp_auth(struct intel_digital_port *intel_dig_port, + const struct intel_hdcp_shim *shim) +{ + struct drm_i915_private *dev_priv; + enum port port; + unsigned long r0_prime_gen_start; + int ret, i; + union { + u32 reg[2]; + u8 shim[DRM_HDCP_AN_LEN]; + } an; + union { + u32 reg[2]; + u8 shim[DRM_HDCP_KSV_LEN]; + } bksv; + union { + u32 reg; + u8 shim[DRM_HDCP_RI_LEN]; + } ri; + bool repeater_present; + + dev_priv = intel_dig_port->base.base.dev->dev_private; + + port = intel_dig_port->base.port; + + /* Initialize An with 2 random values and acquire it */ + for (i = 0; i < 2; i++) + I915_WRITE(PORT_HDCP_ANINIT(port), get_random_u32()); + I915_WRITE(PORT_HDCP_CONF(port), HDCP_CONF_CAPTURE_AN); + + /* Wait for An to be acquired */ + if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port), + HDCP_STATUS_AN_READY, + HDCP_STATUS_AN_READY, 1)) { + DRM_ERROR("Timed out waiting for An\n"); + return -ETIMEDOUT; + } + + an.reg[0] = I915_READ(PORT_HDCP_ANLO(port)); + an.reg[1] = I915_READ(PORT_HDCP_ANHI(port)); + ret = shim->write_an_aksv(intel_dig_port, an.shim); + if (ret) + return ret; + + r0_prime_gen_start = jiffies; + + memset(&bksv, 0, sizeof(bksv)); + ret = shim->read_bksv(intel_dig_port, bksv.shim); + if (ret) + return ret; + else if (!intel_hdcp_is_ksv_valid(bksv.shim)) + return -ENODEV; + + I915_WRITE(PORT_HDCP_BKSVLO(port), bksv.reg[0]); + I915_WRITE(PORT_HDCP_BKSVHI(port), bksv.reg[1]); + + ret = shim->repeater_present(intel_dig_port, &repeater_present); + if (ret) + return ret; + if (repeater_present) + I915_WRITE(HDCP_REP_CTL, + intel_hdcp_get_repeater_ctl(intel_dig_port)); + + ret = shim->toggle_signalling(intel_dig_port, true); + if (ret) + return ret; + + I915_WRITE(PORT_HDCP_CONF(port), HDCP_CONF_AUTH_AND_ENC); + + /* Wait for R0 ready */ + if (wait_for(I915_READ(PORT_HDCP_STATUS(port)) & + (HDCP_STATUS_R0_READY | HDCP_STATUS_ENC), 1)) { + DRM_ERROR("Timed out waiting for R0 ready\n"); + return -ETIMEDOUT; + } + + /* + * Wait for R0' to become available. The spec says 100ms from Aksv, but + * some monitors can take longer than this. We'll set the timeout at + * 300ms just to be sure. + * + * On DP, there's an R0_READY bit available but no such bit + * exists on HDMI. Since the upper-bound is the same, we'll just do + * the stupid thing instead of polling on one and not the other. + */ + wait_remaining_ms_from_jiffies(r0_prime_gen_start, 300); + + ri.reg = 0; + ret = shim->read_ri_prime(intel_dig_port, ri.shim); + if (ret) + return ret; + I915_WRITE(PORT_HDCP_RPRIME(port), ri.reg); + + /* Wait for Ri prime match */ + if (wait_for(I915_READ(PORT_HDCP_STATUS(port)) & + (HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC), 1)) { + DRM_ERROR("Timed out waiting for Ri prime match (%x)\n", + I915_READ(PORT_HDCP_STATUS(port))); + return -ETIMEDOUT; + } + + /* Wait for encryption confirmation */ + if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port), + HDCP_STATUS_ENC, HDCP_STATUS_ENC, 20)) { + DRM_ERROR("Timed out waiting for encryption\n"); + return -ETIMEDOUT; + } + + /* + * XXX: If we have MST-connected devices, we need to enable encryption + * on those as well. + */ + + return intel_hdcp_auth_downstream(intel_dig_port, shim); +} + +static +struct intel_digital_port *conn_to_dig_port(struct intel_connector *connector) +{ + return enc_to_dig_port(&intel_attached_encoder(&connector->base)->base); +} + +static int _intel_hdcp_disable(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = connector->base.dev->dev_private; + struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector); + enum port port = intel_dig_port->base.port; + int ret; + + I915_WRITE(PORT_HDCP_CONF(port), 0); + if (intel_wait_for_register(dev_priv, PORT_HDCP_STATUS(port), ~0, 0, + 20)) { + DRM_ERROR("Failed to disable HDCP, timeout clearing status\n"); + return -ETIMEDOUT; + } + + intel_hdcp_clear_keys(dev_priv); + + ret = connector->hdcp_shim->toggle_signalling(intel_dig_port, false); + if (ret) { + DRM_ERROR("Failed to disable HDCP signalling\n"); + return ret; + } + + DRM_INFO("HDCP is disabled\n"); + return 0; +} + +static int _intel_hdcp_enable(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = connector->base.dev->dev_private; + int i, ret; + + if (!(I915_READ(SKL_FUSE_STATUS) & SKL_FUSE_PG_DIST_STATUS(1))) { + DRM_ERROR("PG1 is disabled, cannot load keys\n"); + return -ENXIO; + } + + for (i = 0; i < KEY_LOAD_TRIES; i++) { + ret = intel_hdcp_load_keys(dev_priv); + if (!ret) + break; + intel_hdcp_clear_keys(dev_priv); + } + if (ret) { + DRM_ERROR("Could not load HDCP keys, (%d)\n", ret); + return ret; + } + + ret = intel_hdcp_auth(conn_to_dig_port(connector), + connector->hdcp_shim); + if (ret) { + DRM_ERROR("Failed to authenticate HDCP (%d)\n", ret); + return ret; + } + + return 0; +} + +static void intel_hdcp_check_work(struct work_struct *work) +{ + struct intel_connector *connector = container_of(to_delayed_work(work), + struct intel_connector, + hdcp_check_work); + if (!intel_hdcp_check_link(connector)) + schedule_delayed_work(&connector->hdcp_check_work, + DRM_HDCP_CHECK_PERIOD_MS); +} + +static void intel_hdcp_prop_work(struct work_struct *work) +{ + struct intel_connector *connector = container_of(work, + struct intel_connector, + hdcp_prop_work); + struct drm_device *dev = connector->base.dev; + struct drm_connector_state *state; + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + mutex_lock(&connector->hdcp_mutex); + + /* + * This worker is only used to flip between ENABLED/DESIRED. Either of + * those to UNDESIRED is handled by core. If hdcp_value == UNDESIRED, + * we're running just after hdcp has been disabled, so just exit + */ + if (connector->hdcp_value != DRM_MODE_CONTENT_PROTECTION_UNDESIRED) { + state = connector->base.state; + state->content_protection = connector->hdcp_value; + } + + mutex_unlock(&connector->hdcp_mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); +} + +int intel_hdcp_init(struct intel_connector *connector, + const struct intel_hdcp_shim *hdcp_shim) +{ + int ret; + + ret = drm_connector_attach_content_protection_property( + &connector->base); + if (ret) + return ret; + + connector->hdcp_shim = hdcp_shim; + mutex_init(&connector->hdcp_mutex); + INIT_DELAYED_WORK(&connector->hdcp_check_work, intel_hdcp_check_work); + INIT_WORK(&connector->hdcp_prop_work, intel_hdcp_prop_work); + return 0; +} + +int intel_hdcp_enable(struct intel_connector *connector) +{ + int ret; + + if (!connector->hdcp_shim) + return -ENOENT; + + mutex_lock(&connector->hdcp_mutex); + + ret = _intel_hdcp_enable(connector); + if (ret) + goto out; + + connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_ENABLED; + schedule_work(&connector->hdcp_prop_work); + schedule_delayed_work(&connector->hdcp_check_work, + DRM_HDCP_CHECK_PERIOD_MS); +out: + mutex_unlock(&connector->hdcp_mutex); + return ret; +} + +int intel_hdcp_disable(struct intel_connector *connector) +{ + int ret; + + if (!connector->hdcp_shim) + return -ENOENT; + + mutex_lock(&connector->hdcp_mutex); + + connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_UNDESIRED; + ret = _intel_hdcp_disable(connector); + + mutex_unlock(&connector->hdcp_mutex); + cancel_delayed_work_sync(&connector->hdcp_check_work); + return ret; +} + +void intel_hdcp_atomic_check(struct drm_connector *connector, + struct drm_connector_state *old_state, + struct drm_connector_state *new_state) +{ + uint64_t old_cp = old_state->content_protection; + uint64_t new_cp = new_state->content_protection; + struct drm_crtc_state *crtc_state; + + if (!new_state->crtc) { + /* + * If the connector is being disabled with CP enabled, mark it + * desired so it's re-enabled when the connector is brought back + */ + if (old_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED) + new_state->content_protection = + DRM_MODE_CONTENT_PROTECTION_DESIRED; + return; + } + + /* + * Nothing to do if the state didn't change, or HDCP was activated since + * the last commit + */ + if (old_cp == new_cp || + (old_cp == DRM_MODE_CONTENT_PROTECTION_DESIRED && + new_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED)) + return; + + crtc_state = drm_atomic_get_new_crtc_state(new_state->state, + new_state->crtc); + crtc_state->mode_changed = true; +} + +/* Implements Part 3 of the HDCP authorization procedure */ +int intel_hdcp_check_link(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = connector->base.dev->dev_private; + struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector); + enum port port = intel_dig_port->base.port; + int ret = 0; + + if (!connector->hdcp_shim) + return -ENOENT; + + mutex_lock(&connector->hdcp_mutex); + + if (connector->hdcp_value == DRM_MODE_CONTENT_PROTECTION_UNDESIRED) + goto out; + + if (!(I915_READ(PORT_HDCP_STATUS(port)) & HDCP_STATUS_ENC)) { + DRM_ERROR("HDCP check failed: link is not encrypted, %x\n", + I915_READ(PORT_HDCP_STATUS(port))); + ret = -ENXIO; + connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED; + schedule_work(&connector->hdcp_prop_work); + goto out; + } + + if (connector->hdcp_shim->check_link(intel_dig_port)) { + if (connector->hdcp_value != + DRM_MODE_CONTENT_PROTECTION_UNDESIRED) { + connector->hdcp_value = + DRM_MODE_CONTENT_PROTECTION_ENABLED; + schedule_work(&connector->hdcp_prop_work); + } + goto out; + } + + DRM_INFO("HDCP link failed, retrying authentication\n"); + + ret = _intel_hdcp_disable(connector); + if (ret) { + DRM_ERROR("Failed to disable hdcp (%d)\n", ret); + connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED; + schedule_work(&connector->hdcp_prop_work); + goto out; + } + + ret = _intel_hdcp_enable(connector); + if (ret) { + DRM_ERROR("Failed to enable hdcp (%d)\n", ret); + connector->hdcp_value = DRM_MODE_CONTENT_PROTECTION_DESIRED; + schedule_work(&connector->hdcp_prop_work); + goto out; + } + +out: + mutex_unlock(&connector->hdcp_mutex); + return ret; +}

Once the Aksv is available in the PCH, we need to get it on the wire to the receiver via DDC. The hardware doesn't allow us to read the value directly, so we need to tell GMBUS to source the Aksv internally and send it to the right offset on the receiver.

The way we do this is to initiate an indexed write where the index is the Aksv register offset. We write dummy values to GMBUS3 as if we were sending the key, and the hardware slips in the "real" values when it goes out.

Changes in v2: - None Changes in v3: - Uses new index write feature (Ville) Changes in v4: - None Changes in v5: - checkpatch whitespace fix Changes in v6: - None

Cc: Ville Syrjälä ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter daniel.vetter@ffwll.ch Signed-off-by: Sean Paul seanpaul@chromium.org --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_i2c.c | 47 +++++++++++++++++++++++++++++++++++++--- 3 files changed, 46 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index caebd5825279..a689396d0ff6 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3644,6 +3644,7 @@ extern int intel_setup_gmbus(struct drm_i915_private *dev_priv); extern void intel_teardown_gmbus(struct drm_i915_private *dev_priv); extern bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv, unsigned int pin); +extern int intel_gmbus_output_aksv(struct i2c_adapter *adapter);

extern struct i2c_adapter * intel_gmbus_get_adapter(struct drm_i915_private *dev_priv, unsigned int pin); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5db8d18c73ab..571e5097887c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3043,6 +3043,7 @@ enum i915_power_well_id { # define GPIO_DATA_PULLUP_DISABLE (1 << 13)

#define GMBUS0 _MMIO(dev_priv->gpio_mmio_base + 0x5100) /* clock/port select */ +#define GMBUS_AKSV_SELECT (1<<11) #define GMBUS_RATE_100KHZ (0<<8) #define GMBUS_RATE_50KHZ (1<<8) #define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */ diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index d9e6993fa718..6f7ef4e225ee 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -30,6 +30,7 @@ #include <linux/i2c-algo-bit.h> #include <linux/export.h> #include <drm/drmP.h> +#include <drm/drm_hdcp.h> #include "intel_drv.h" #include <drm/i915_drm.h> #include "i915_drv.h" @@ -507,7 +508,8 @@ gmbus_index_xfer(struct drm_i915_private *dev_priv, struct i2c_msg *msgs) }

static int -do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) +do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num, + u32 gmbus0_source) { struct intel_gmbus *bus = container_of(adapter, struct intel_gmbus, @@ -524,7 +526,7 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) pch_gmbus_clock_gating(dev_priv, false);

retry: - I915_WRITE_FW(GMBUS0, bus->reg0); + I915_WRITE_FW(GMBUS0, gmbus0_source | bus->reg0);

for (; i < num; i += inc) { inc = 1; @@ -649,7 +651,7 @@ gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) if (ret < 0) bus->force_bit &= ~GMBUS_FORCE_BIT_RETRY; } else { - ret = do_gmbus_xfer(adapter, msgs, num); + ret = do_gmbus_xfer(adapter, msgs, num, 0); if (ret == -EAGAIN) bus->force_bit |= GMBUS_FORCE_BIT_RETRY; } @@ -659,6 +661,45 @@ gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) return ret; }

+int intel_gmbus_output_aksv(struct i2c_adapter *adapter) +{ + struct intel_gmbus *bus = container_of(adapter, struct intel_gmbus, + adapter); + struct drm_i915_private *dev_priv = bus->dev_priv; + int ret; + u8 cmd = DRM_HDCP_DDC_AKSV; + u8 buf[DRM_HDCP_KSV_LEN] = { 0 }; + struct i2c_msg msgs[] = { + { + .addr = DRM_HDCP_DDC_ADDR, + .flags = 0, + .len = sizeof(cmd), + .buf = &cmd, + }, + { + .addr = DRM_HDCP_DDC_ADDR, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS); + mutex_lock(&dev_priv->gmbus_mutex); + + /* + * In order to output Aksv to the receiver, use an indexed write to + * pass the i2c command, and tell GMBUS to use the HW-provided value + * instead of sourcing GMBUS3 for the data. + */ + ret = do_gmbus_xfer(adapter, msgs, ARRAY_SIZE(msgs), GMBUS_AKSV_SELECT); + + mutex_unlock(&dev_priv->gmbus_mutex); + intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS); + + return ret; +} + static u32 gmbus_func(struct i2c_adapter *adapter) { return i2c_bit_algo.functionality(adapter) &

This patch adds HDCP support for DisplayPort connectors by implementing the intel_hdcp_shim.

Most of this is straightforward read/write from/to DPCD registers. One thing worth pointing out is the Aksv output bit. It wasn't easily separable like it's HDMI counterpart, so it's crammed in with the rest of it.

Changes in v2: - Moved intel_hdcp_check_link out of intel_dp_check_link and only call it on short pulse. Since intel_hdcp_check_link does its own locking, this ensures we don't deadlock when intel_dp_check_link is called holding connection_mutex. - Rebased on drm-intel-next Changes in v3: - Initialize new worker Changes in v4: - Use intel_hdcp_init (Daniel) - Check for reauth requests in check_link (Ram) Changes in v5: - None Changes in v6: - Fix build warnings when printing ssize_t

Cc: Daniel Vetter daniel.vetter@ffwll.ch Reviewed-by: Ramalingam C ramalingam.c@intel.com Signed-off-by: Sean Paul seanpaul@chromium.org --- drivers/gpu/drm/i915/intel_dp.c | 244 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 237 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 35c5299feab6..68229f53d5b8 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -36,7 +36,9 @@ #include <drm/drm_atomic_helper.h> #include <drm/drm_crtc.h> #include <drm/drm_crtc_helper.h> +#include <drm/drm_dp_helper.h> #include <drm/drm_edid.h> +#include <drm/drm_hdcp.h> #include "intel_drv.h" #include <drm/i915_drm.h> #include "i915_drv.h" @@ -1025,10 +1027,29 @@ static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp, DP_AUX_CH_CTL_SYNC_PULSE_SKL(32); }

+static uint32_t intel_dp_get_aux_send_ctl(struct intel_dp *intel_dp, + bool has_aux_irq, + int send_bytes, + uint32_t aux_clock_divider, + bool aksv_write) +{ + uint32_t val = 0; + + if (aksv_write) { + send_bytes += 5; + val |= DP_AUX_CH_CTL_AUX_AKSV_SELECT; + } + + return val | intel_dp->get_aux_send_ctl(intel_dp, + has_aux_irq, + send_bytes, + aux_clock_divider); +} + static int intel_dp_aux_ch(struct intel_dp *intel_dp, const uint8_t *send, int send_bytes, - uint8_t *recv, int recv_size) + uint8_t *recv, int recv_size, bool aksv_write) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_i915_private *dev_priv = @@ -1088,10 +1109,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, }

while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) { - u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp, - has_aux_irq, - send_bytes, - aux_clock_divider); + u32 send_ctl = intel_dp_get_aux_send_ctl(intel_dp, + has_aux_irq, + send_bytes, + aux_clock_divider, + aksv_write);

/* Must try at least 3 times according to DP spec */ for (try = 0; try < 5; try++) { @@ -1228,7 +1250,8 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) if (msg->buffer) memcpy(txbuf + HEADER_SIZE, msg->buffer, msg->size);

- ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize); + ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize, + false); if (ret > 0) { msg->reply = rxbuf[0] >> 4;

@@ -1250,7 +1273,8 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) if (WARN_ON(rxsize > 20)) return -E2BIG;

- ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize); + ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize, + false); if (ret > 0) { msg->reply = rxbuf[0] >> 4; /* @@ -4985,6 +5009,203 @@ void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder) pps_unlock(intel_dp); }

+static +int intel_dp_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port, + u8 *an) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&intel_dig_port->base.base); + uint8_t txbuf[4], rxbuf[2], reply = 0; + ssize_t dpcd_ret; + int ret; + + /* Output An first, that's easy */ + dpcd_ret = drm_dp_dpcd_write(&intel_dig_port->dp.aux, DP_AUX_HDCP_AN, + an, DRM_HDCP_AN_LEN); + if (dpcd_ret != DRM_HDCP_AN_LEN) { + DRM_ERROR("Failed to write An over DP/AUX (%zd)\n", dpcd_ret); + return dpcd_ret >= 0 ? -EIO : dpcd_ret; + } + + /* + * Since Aksv is Oh-So-Secret, we can't access it in software. So in + * order to get it on the wire, we need to create the AUX header as if + * we were writing the data, and then tickle the hardware to output the + * data once the header is sent out. + */ + txbuf[0] = (DP_AUX_NATIVE_WRITE << 4) | + ((DP_AUX_HDCP_AKSV >> 16) & 0xf); + txbuf[1] = (DP_AUX_HDCP_AKSV >> 8) & 0xff; + txbuf[2] = DP_AUX_HDCP_AKSV & 0xff; + txbuf[3] = DRM_HDCP_KSV_LEN - 1; + + ret = intel_dp_aux_ch(intel_dp, txbuf, sizeof(txbuf), rxbuf, + sizeof(rxbuf), true); + if (ret < 0) { + DRM_ERROR("Write Aksv over DP/AUX failed (%d)\n", ret); + return ret; + } else if (ret == 0) { + DRM_ERROR("Aksv write over DP/AUX was empty\n"); + return -EIO; + } + + reply = (rxbuf[0] >> 4) & DP_AUX_NATIVE_REPLY_MASK; + return reply == DP_AUX_NATIVE_REPLY_ACK ? 0 : -EIO; +} + +static int intel_dp_hdcp_read_bksv(struct intel_digital_port *intel_dig_port, + u8 *bksv) +{ + ssize_t ret; + ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BKSV, bksv, + DRM_HDCP_KSV_LEN); + if (ret != DRM_HDCP_KSV_LEN) { + DRM_ERROR("Read Bksv from DP/AUX failed (%zd)\n", ret); + return ret >= 0 ? -EIO : ret; + } + return 0; +} + +static int intel_dp_hdcp_read_bstatus(struct intel_digital_port *intel_dig_port, + u8 *bstatus) +{ + ssize_t ret; + /* + * For some reason the HDMI and DP HDCP specs call this register + * definition by different names. In the HDMI spec, it's called BSTATUS, + * but in DP it's called BINFO. + */ + ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BINFO, + bstatus, DRM_HDCP_BSTATUS_LEN); + if (ret != DRM_HDCP_BSTATUS_LEN) { + DRM_ERROR("Read bstatus from DP/AUX failed (%zd)\n", ret); + return ret >= 0 ? -EIO : ret; + } + return 0; +} + +static +int intel_dp_hdcp_repeater_present(struct intel_digital_port *intel_dig_port, + bool *repeater_present) +{ + ssize_t ret; + u8 bcaps; + ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BCAPS, + &bcaps, 1); + if (ret != 1) { + DRM_ERROR("Read bcaps from DP/AUX failed (%zd)\n", ret); + return ret >= 0 ? -EIO : ret; + } + *repeater_present = bcaps & DP_BCAPS_REPEATER_PRESENT; + return 0; +} + +static +int intel_dp_hdcp_read_ri_prime(struct intel_digital_port *intel_dig_port, + u8 *ri_prime) +{ + ssize_t ret; + ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_RI_PRIME, + ri_prime, DRM_HDCP_RI_LEN); + if (ret != DRM_HDCP_RI_LEN) { + DRM_ERROR("Read Ri' from DP/AUX failed (%zd)\n", ret); + return ret >= 0 ? -EIO : ret; + } + return 0; +} + +static +int intel_dp_hdcp_read_ksv_ready(struct intel_digital_port *intel_dig_port, + bool *ksv_ready) +{ + ssize_t ret; + u8 bstatus; + ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BSTATUS, + &bstatus, 1); + if (ret != 1) { + DRM_ERROR("Read bstatus from DP/AUX failed (%zd)\n", ret); + return ret >= 0 ? -EIO : ret; + } + *ksv_ready = bstatus & DP_BSTATUS_READY; + return 0; +} + +static +int intel_dp_hdcp_read_ksv_fifo(struct intel_digital_port *intel_dig_port, + int num_downstream, u8 *ksv_fifo) +{ + ssize_t ret; + int i; + + /* KSV list is read via 15 byte window (3 entries @ 5 bytes each) */ + for (i = 0; i < num_downstream; i += 3) { + size_t len = min(num_downstream - i, 3) * DRM_HDCP_KSV_LEN; + ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, + DP_AUX_HDCP_KSV_FIFO, + ksv_fifo + i * DRM_HDCP_KSV_LEN, + len); + if (ret != len) { + DRM_ERROR("Read ksv[%d] from DP/AUX failed (%zd)\n", i, + ret); + return ret >= 0 ? -EIO : ret; + } + } + return 0; +} + +static +int intel_dp_hdcp_read_v_prime_part(struct intel_digital_port *intel_dig_port, + int i, u32 *part) +{ + ssize_t ret; + + if (i >= DRM_HDCP_V_PRIME_NUM_PARTS) + return -EINVAL; + + ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, + DP_AUX_HDCP_V_PRIME(i), part, + DRM_HDCP_V_PRIME_PART_LEN); + if (ret != DRM_HDCP_V_PRIME_PART_LEN) { + DRM_ERROR("Read v'[%d] from DP/AUX failed (%zd)\n", i, ret); + return ret >= 0 ? -EIO : ret; + } + return 0; +} + +static +int intel_dp_hdcp_toggle_signalling(struct intel_digital_port *intel_dig_port, + bool enable) +{ + /* Not used for single stream DisplayPort setups */ + return 0; +} + +static +bool intel_dp_hdcp_check_link(struct intel_digital_port *intel_dig_port) +{ + ssize_t ret; + u8 bstatus; + ret = drm_dp_dpcd_read(&intel_dig_port->dp.aux, DP_AUX_HDCP_BSTATUS, + &bstatus, 1); + if (ret != 1) { + DRM_ERROR("Read bstatus from DP/AUX failed (%zd)\n", ret); + return ret >= 0 ? -EIO : ret; + } + return !(bstatus & (DP_BSTATUS_LINK_FAILURE | DP_BSTATUS_REAUTH_REQ)); +} + +static const struct intel_hdcp_shim intel_dp_hdcp_shim = { + .write_an_aksv = intel_dp_hdcp_write_an_aksv, + .read_bksv = intel_dp_hdcp_read_bksv, + .read_bstatus = intel_dp_hdcp_read_bstatus, + .repeater_present = intel_dp_hdcp_repeater_present, + .read_ri_prime = intel_dp_hdcp_read_ri_prime, + .read_ksv_ready = intel_dp_hdcp_read_ksv_ready, + .read_ksv_fifo = intel_dp_hdcp_read_ksv_fifo, + .read_v_prime_part = intel_dp_hdcp_read_v_prime_part, + .toggle_signalling = intel_dp_hdcp_toggle_signalling, + .check_link = intel_dp_hdcp_check_link, +}; + static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp) { struct drm_i915_private *dev_priv = to_i915(intel_dp_to_dev(intel_dp)); @@ -5150,6 +5371,9 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) drm_modeset_acquire_fini(&ctx); WARN(iret, "Acquiring modeset locks failed with %i\n", iret);

+ /* Short pulse can signify loss of hdcp authentication */ + intel_hdcp_check_link(intel_dp->attached_connector); + if (!handled) { intel_dp->detect_done = false; goto put_power; @@ -6128,6 +6352,12 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,

intel_dp_add_properties(intel_dp, connector);

+ if (INTEL_GEN(dev_priv) >= 9 && !intel_dp_is_edp(intel_dp)) { + int ret = intel_hdcp_init(intel_connector, &intel_dp_hdcp_shim); + if (ret) + DRM_DEBUG_KMS("HDCP init failed, skipping.\n"); + } + /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written * 0xd. Failure to do so will result in spurious interrupts being * generated on the port when a cable is not attached.