Hi,
On Wed, Dec 15, 2010 at 07:10:28PM -0800, ext Linus Torvalds wrote:
Go forth and test. And please do remember to ping bugzilla (or developers) about any regressions you find, whether new or old.
I have some problem with i945, display remains blank. I also tried adding i915.modeset=0 but nothing changed. Machine is well alive and responds to basic commands like Ctrl+Alt+F1 and Ctrl+Alt+Del but I have not other machine to enter via network.
Since it was working in -rc5, I bisected it. It boiled down to ea5d552c73707645c53d42e8a71c9a4d9cbb85c1 but it's not the right commit since everything still works with it. And I'm officially confused.
Unfortunately I cannot play too much with this box so please give me some clever suggestion to be more efficient. Anyway I'll try also at home on a i915 :)
I attached configuration and boot log.
thanks, Domenico
Alex Deucher (4): drm/radeon/kms: fix formatting of vram and gtt info drm/radeon/kms: fix vram base calculation on rs780/rs880 drm/kms: remove spaces from connector names (v2) drm/radeon/kms: don't apply 7xx HDP flush workaround on AGP
Chris Wilson (10): drm/i915: Clean conflicting modesetting registers upon init drm/i915: Death to the unnecessary 64bit divide drm/i915: Factor in pixel-repeat in FDI M/N calculation drm/i915/ringbuffer: Only print an error on the second attempt to reset head drm/i915/lvds: Always restore panel-fitter when enabling the LVDS drm/i915: Emit a request to clear a flushed and idle ring for unbusy bo drm/i915/dp: Only apply the workaround if the select is still active drm: Add missing drm_vblank_put() along queue vblank error path drm: Don't try and disable an encoder that was never enabled ACPI: video: fix build for CONFIG_ACPI=n
Daniel Vetter (1): drm/i915: announce to userspace that the bsd ring is coherent
Dave Airlie (1): drm/i915: i915 cannot provide switcher services.
Eric Anholt (2): drm/i915: Always set the DP transcoder config to 8BPC. drm/i915: Apply a workaround for transitioning from DP on pipe B to HDMI.
On Thu, 16 Dec 2010 18:30:11 +0100, Domenico Andreoli cavokz@gmail.com wrote:
Hi,
On Wed, Dec 15, 2010 at 07:10:28PM -0800, ext Linus Torvalds wrote:
Go forth and test. And please do remember to ping bugzilla (or developers) about any regressions you find, whether new or old.
I have some problem with i945, display remains blank. I also tried adding i915.modeset=0 but nothing changed. Machine is well alive and responds to basic commands like Ctrl+Alt+F1 and Ctrl+Alt+Del but I have not other machine to enter via network.
If i915.modeset=0 doesn't restore the display then something is extremely fishy. Do you see any console output before the i915.ko is loaded?
[ 1.284262] [drm] Initialized drm 1.1.0 20060810 [ 1.284334] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.485212] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.485642] [drm] initialized overlay support [ 2.526011] No connectors reported connected with modes [ 2.526053] [drm] Cannot find any crtc or sizes - going 1024x768
The issue appears to be that no outputs are being detected. I presume that you have instead a VGA connected to the box and that the regression is in fact e7dbb2f2. If I'm guessing rightly:
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 8df5743..14c276e 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -148,7 +148,9 @@ static void intel_crt_mode_set(struct drm_encoder *encoder, dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); }
- adpa = ADPA_HOTPLUG_BITS; + adpa = 0; + if (INTEL_INFO(dev)->gen >= 4) + adpa |= ADPA_HOTPLUG_BITS; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) adpa |= ADPA_HSYNC_ACTIVE_HIGH; if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
On Thu, Dec 16, 2010 at 08:37:03PM +0000, ext Chris Wilson wrote:
On Thu, 16 Dec 2010 18:30:11 +0100, Domenico Andreoli cavokz@gmail.com wrote:
Hi,
On Wed, Dec 15, 2010 at 07:10:28PM -0800, ext Linus Torvalds wrote:
Go forth and test. And please do remember to ping bugzilla (or developers) about any regressions you find, whether new or old.
I have some problem with i945, display remains blank. I also tried adding i915.modeset=0 but nothing changed. Machine is well alive and responds to basic commands like Ctrl+Alt+F1 and Ctrl+Alt+Del but I have not other machine to enter via network.
If i915.modeset=0 doesn't restore the display then something is extremely fishy. Do you see any console output before the i915.ko is loaded?
no, I can only see what is in /var/log/messages
[ 1.284262] [drm] Initialized drm 1.1.0 20060810 [ 1.284334] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.485212] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.485642] [drm] initialized overlay support [ 2.526011] No connectors reported connected with modes [ 2.526053] [drm] Cannot find any crtc or sizes - going 1024x768
[ 1.277898] [drm] Initialized drm 1.1.0 20060810 [ 1.277966] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.476151] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.476552] [drm] initialized overlay support [ 2.516008] No connectors reported connected with modes [ 2.516049] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.526296] Console: switching to colour frame buffer device 128x48 [ 2.528880] fb0: inteldrmfb frame buffer device [ 2.528907] drm: registered panic notifier [ 2.528937] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
this is the log with reverted e7dbb2f2.
The issue appears to be that no outputs are being detected. I presume that you have instead a VGA connected to the box and that the regression is in fact e7dbb2f2. If I'm guessing rightly:
yes, display is attached to the VGA port.
I reverted this commit on -rc6, the only improvement is that with i915.modeset=0 I get the display back to normal VGA mode but when KMS is enabled I still get the blank screen.
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 8df5743..14c276e 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -148,7 +148,9 @@ static void intel_crt_mode_set(struct drm_encoder *encoder, dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); }
adpa = ADPA_HOTPLUG_BITS;
adpa = 0;if (INTEL_INFO(dev)->gen >= 4)adpa |= ADPA_HOTPLUG_BITS; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) adpa |= ADPA_HSYNC_ACTIVE_HIGH; if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
I tried this patch on -rc6 but does not help at all.
cheers, Domenico
dri-devel@lists.freedesktop.org
-
Chris Wilson -
Domenico Andreoli