Elements of the 'names' array are not changed by the code, constify them for consistency.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/opp/core.c | 6 +++--- include/linux/pm_opp.h | 8 ++++---- 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c index 04b4691a8aac..3057beabd370 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -2348,12 +2348,12 @@ static void _opp_detach_genpd(struct opp_table *opp_table) * "required-opps" are added in DT. */ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, - const char **names, struct device ***virt_devs) + const char * const *names, struct device ***virt_devs) { struct opp_table *opp_table; struct device *virt_dev; int index = 0, ret = -EINVAL; - const char **name = names; + const char * const *name = names;

opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) @@ -2457,7 +2457,7 @@ static void devm_pm_opp_detach_genpd(void *data) * * Return: 0 on success and errorno otherwise. */ -int devm_pm_opp_attach_genpd(struct device *dev, const char **names, +int devm_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs) { struct opp_table *opp_table; diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index a95d6fdd20b6..879c138c7b8e 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -156,9 +156,9 @@ int devm_pm_opp_set_clkname(struct device *dev, const char *name); struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table); int devm_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); -struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs); +struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs); void dev_pm_opp_detach_genpd(struct opp_table *opp_table); -int devm_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs); +int devm_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs); struct dev_pm_opp *dev_pm_opp_xlate_required_opp(struct opp_table *src_table, struct opp_table *dst_table, struct dev_pm_opp *src_opp); int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate); int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq); @@ -376,7 +376,7 @@ static inline int devm_pm_opp_set_clkname(struct device *dev, const char *name) return -EOPNOTSUPP; }

-static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs) +static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs) { return ERR_PTR(-EOPNOTSUPP); } @@ -384,7 +384,7 @@ static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, cons static inline void dev_pm_opp_detach_genpd(struct opp_table *opp_table) {}

static inline int devm_pm_opp_attach_genpd(struct device *dev, - const char **names, + const char * const *names, struct device ***virt_devs) { return -EOPNOTSUPP;

Only couple drivers need to get the -ENODEV error code and majority of drivers need to explicitly initialize the performance state. Add new common helper which sets up OPP table for these drivers.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- include/soc/tegra/common.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)

diff --git a/include/soc/tegra/common.h b/include/soc/tegra/common.h index af41ad80ec21..5b4a042f60fb 100644 --- a/include/soc/tegra/common.h +++ b/include/soc/tegra/common.h @@ -39,4 +39,28 @@ devm_tegra_core_dev_init_opp_table(struct device *dev, } #endif

+/* + * This function should be invoked with the enabled runtime PM of the device + * in order to initialize performance state properly. Most of Tegra devices + * are assumed to be suspended at a probe time and GENPD require RPM to be + * enabled to set up the rpm-resume state, otherwise device is active and + * performance state is applied immediately. Note that it will initialize + * OPP bandwidth if it's wired in a device-tree for this device, which is + * undesirable for a suspended device. + */ +static inline int +devm_tegra_core_dev_init_opp_table_common(struct device *dev) +{ + struct tegra_core_opp_params opp_params = {}; + int err; + + opp_params.init_state = true; + + err = devm_tegra_core_dev_init_opp_table(dev, &opp_params); + if (err != -ENODEV) + return err; + + return 0; +} + #endif /* __SOC_TEGRA_COMMON_H__ */

Previously we assumed that devm_tegra_core_dev_init_opp_table() will be used only by drivers that will always have device with OPP table, but this is not true anymore. For example now Tegra30 will have OPP table for PWM, but Tegra20 not and both use the same driver. Hence let's not print the error message about missing OPP table in the common helper, we can print it elsewhere.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/soc/tegra/common.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/soc/tegra/common.c b/drivers/soc/tegra/common.c index cd33e99249c3..a42d4f98c078 100644 --- a/drivers/soc/tegra/common.c +++ b/drivers/soc/tegra/common.c @@ -111,9 +111,7 @@ int devm_tegra_core_dev_init_opp_table(struct device *dev, */ err = devm_pm_opp_of_add_table(dev); if (err) { - if (err == -ENODEV) - dev_err_once(dev, "OPP table not found, please update device-tree\n"); - else + if (err != -ENODEV) dev_err(dev, "failed to add OPP table: %d\n", err);

return err;

The Clock-and-Reset controller resides in a core power domain on NVIDIA Tegra SoCs. In order to support voltage scaling of the core power domain, we hook up DVFS-capable clocks to the core GENPD for managing of the GENPD's performance state based on the clock changes.

Some clocks don't have any specific physical hardware unit that backs them, like root PLLs and system clock and they have theirs own voltage requirements. This patch adds new clk-device driver that backs the clocks and provides runtime PM functionality for them. A virtual clk-device is created for each such DVFS-capable clock at the clock's registration time by the new tegra_clk_register() helper. Driver changes clock's device GENPD performance state based on clk-rate notifications.

In result we have this sequence of events:

1. Clock driver creates virtual device for selective clocks, enables runtime PM for the created device and registers the clock. 2. Clk-device driver starts to listen to clock rate changes. 3. Something changes clk rate or enables/disables clk. 4. CCF core propagates the change through the clk tree. 5. Clk-device driver gets clock rate-change notification or GENPD core handles prepare/unprepare of the clock. 6. Clk-device driver changes GENPD performance state on clock rate change. 7. GENPD driver changes voltage regulator state change. 8. The regulator state is committed to hardware via I2C.

We rely on fact that DVFS is not needed for Tegra I2C and that Tegra I2C driver already keeps clock always-prepared. Hence I2C subsystem stays independent from the clk power management and there are no deadlock spots in the sequence.

Currently all clocks are registered very early during kernel boot when the device driver core isn't available yet. The clk-device can't be created at that time. This patch splits the registration of the clocks in two phases:

1. Register all essential clocks which don't use RPM and are needed during early boot.

2. Register at a later boot time the rest of clocks.

This patch adds power management support for Tegra20 and Tegra30 clocks.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/clk/tegra/Makefile | 1 + drivers/clk/tegra/clk-device.c | 230 ++++++++++++++++++++++++++++++++ drivers/clk/tegra/clk-pll.c | 2 +- drivers/clk/tegra/clk-super.c | 2 +- drivers/clk/tegra/clk-tegra20.c | 77 ++++++++--- drivers/clk/tegra/clk-tegra30.c | 116 +++++++++++----- drivers/clk/tegra/clk.c | 75 ++++++++++- drivers/clk/tegra/clk.h | 2 + 8 files changed, 451 insertions(+), 54 deletions(-) create mode 100644 drivers/clk/tegra/clk-device.c

diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile index 7b1816856eb5..a0715cdfc1a4 100644 --- a/drivers/clk/tegra/Makefile +++ b/drivers/clk/tegra/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-y += clk.o obj-y += clk-audio-sync.o +obj-y += clk-device.o obj-y += clk-dfll.o obj-y += clk-divider.o obj-y += clk-periph.o diff --git a/drivers/clk/tegra/clk-device.c b/drivers/clk/tegra/clk-device.c new file mode 100644 index 000000000000..830bc0ba25d3 --- /dev/null +++ b/drivers/clk/tegra/clk-device.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_opp.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> + +#include <soc/tegra/common.h> + +#include "clk.h" + +/* + * This driver manages performance state of the core power domain for the + * independent PLLs and system clocks. We created a virtual clock device + * for such clocks, see tegra_clk_dev_register(). + */ + +struct tegra_clk_device { + struct notifier_block clk_nb; + struct device *dev; + struct clk_hw *hw; + struct mutex lock; +}; + +static int tegra_clock_set_pd_state(struct tegra_clk_device *clk_dev, + unsigned long rate) +{ + struct device *dev = clk_dev->dev; + struct dev_pm_opp *opp; + unsigned int pstate; + + opp = dev_pm_opp_find_freq_ceil(dev, &rate); + if (opp == ERR_PTR(-ERANGE)) { + dev_dbg(dev, "failed to find ceil OPP for %luHz\n", rate); + opp = dev_pm_opp_find_freq_floor(dev, &rate); + } + + if (IS_ERR(opp)) { + dev_err(dev, "failed to find OPP for %luHz: %pe\n", rate, opp); + return PTR_ERR(opp); + } + + pstate = dev_pm_opp_get_required_pstate(opp, 0); + dev_pm_opp_put(opp); + + return dev_pm_genpd_set_performance_state(dev, pstate); +} + +static int tegra_clock_change_notify(struct notifier_block *nb, + unsigned long msg, void *data) +{ + struct clk_notifier_data *cnd = data; + struct tegra_clk_device *clk_dev; + int err = 0; + + clk_dev = container_of(nb, struct tegra_clk_device, clk_nb); + + mutex_lock(&clk_dev->lock); + switch (msg) { + case PRE_RATE_CHANGE: + if (cnd->new_rate > cnd->old_rate) + err = tegra_clock_set_pd_state(clk_dev, cnd->new_rate); + break; + + case ABORT_RATE_CHANGE: + err = tegra_clock_set_pd_state(clk_dev, cnd->old_rate); + break; + + case POST_RATE_CHANGE: + if (cnd->new_rate < cnd->old_rate) + err = tegra_clock_set_pd_state(clk_dev, cnd->new_rate); + break; + + default: + break; + } + mutex_unlock(&clk_dev->lock); + + return notifier_from_errno(err); +} + +static int tegra_clock_sync_pd_state(struct tegra_clk_device *clk_dev) +{ + unsigned long rate; + int ret = 0; + + mutex_lock(&clk_dev->lock); + + if (!pm_runtime_status_suspended(clk_dev->dev)) { + rate = clk_hw_get_rate(clk_dev->hw); + ret = tegra_clock_set_pd_state(clk_dev, rate); + } + + mutex_unlock(&clk_dev->lock); + + return ret; +} + +static int tegra_clock_probe(struct platform_device *pdev) +{ + struct tegra_core_opp_params opp_params = {}; + struct tegra_clk_device *clk_dev; + struct device *dev = &pdev->dev; + struct clk *clk; + int err; + + if (!dev->pm_domain) + return -EINVAL; + + clk_dev = devm_kzalloc(dev, sizeof(*clk_dev), GFP_KERNEL); + if (!clk_dev) + return -ENOMEM; + + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clk_dev->dev = dev; + clk_dev->hw = __clk_get_hw(clk); + clk_dev->clk_nb.notifier_call = tegra_clock_change_notify; + mutex_init(&clk_dev->lock); + + platform_set_drvdata(pdev, clk_dev); + + /* + * Runtime PM was already enabled for this device by the parent clk + * driver and power domain state should be synced under clk_dev lock, + * hence we don't use the common OPP helper that initializes OPP + * state. For some clocks common OPP helper may fail to find ceil + * rate, it's handled by this driver. + */ + err = devm_tegra_core_dev_init_opp_table(dev, &opp_params); + if (err) + return err; + + err = clk_notifier_register(clk, &clk_dev->clk_nb); + if (err) { + dev_err(dev, "failed to register clk notifier: %d\n", err); + return err; + } + + /* + * The driver is attaching to a potentially active/resumed clock, hence + * we need to sync the power domain performance state in a accordance to + * the clock rate if clock is resumed. + */ + err = tegra_clock_sync_pd_state(clk_dev); + if (err) + goto unreg_clk; + + return 0; + +unreg_clk: + clk_notifier_unregister(clk, &clk_dev->clk_nb); + + return err; +} + +static __maybe_unused int tegra_clock_pm_suspend(struct device *dev) +{ + struct tegra_clk_device *clk_dev = dev_get_drvdata(dev); + + /* + * Power management of the clock is entangled with the Tegra PMC + * GENPD because PMC driver enables/disables clocks for toggling + * of the PD's on/off state. + * + * The PMC GENPD is resumed in NOIRQ phase, before RPM of the clocks + * becomes available, hence PMC can't use clocks at the early resume + * phase if RPM is involved. For example when 3d clock is enabled, + * it may enable the parent PLL clock that needs to be RPM-resumed. + * + * Secondly, the PLL clocks may be enabled by the low level suspend + * code, so we need to assume that PLL is in enabled state during + * suspend. + * + * We will keep PLLs and system clock resumed during suspend time. + * All PLLs on all SoCs are low power and system clock is always-on, + * so practically not much is changed here. + */ + + return clk_prepare(clk_dev->hw->clk); +} + +static __maybe_unused int tegra_clock_pm_resume(struct device *dev) +{ + struct tegra_clk_device *clk_dev = dev_get_drvdata(dev); + + clk_unprepare(clk_dev->hw->clk); + + return 0; +} + +static void tegra_clock_shutdown(struct platform_device *pdev) +{ + struct tegra_clk_device *clk_dev = platform_get_drvdata(pdev); + + clk_prepare(clk_dev->hw->clk); +} + +static const struct dev_pm_ops tegra_clock_pm = { + SET_SYSTEM_SLEEP_PM_OPS(tegra_clock_pm_suspend, + tegra_clock_pm_resume) +}; + +static const struct of_device_id tegra_clock_match[] = { + { .compatible = "nvidia,tegra20-sclk" }, + { .compatible = "nvidia,tegra30-sclk" }, + { .compatible = "nvidia,tegra30-pllc" }, + { .compatible = "nvidia,tegra30-plle" }, + { .compatible = "nvidia,tegra30-pllm" }, + { } +}; + +static struct platform_driver tegra_clock_driver = { + .driver = { + .name = "tegra-clock", + .of_match_table = tegra_clock_match, + .pm = &tegra_clock_pm, + .suppress_bind_attrs = true, + }, + .probe = tegra_clock_probe, + .shutdown = tegra_clock_shutdown, +}; +builtin_platform_driver(tegra_clock_driver); diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index eaa079c177c3..100b5d9b7e26 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -1914,7 +1914,7 @@ static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll, /* Data in .init is copied by clk_register(), so stack variable OK */ pll->hw.init = &init;

- return clk_register(NULL, &pll->hw); + return tegra_clk_dev_register(&pll->hw); }

struct clk *tegra_clk_register_pll(const char *name, const char *parent_name, diff --git a/drivers/clk/tegra/clk-super.c b/drivers/clk/tegra/clk-super.c index 6099c6e9acd4..a98a420398fa 100644 --- a/drivers/clk/tegra/clk-super.c +++ b/drivers/clk/tegra/clk-super.c @@ -226,7 +226,7 @@ struct clk *tegra_clk_register_super_mux(const char *name, /* Data in .init is copied by clk_register(), so stack variable OK */ super->hw.init = &init;

- clk = clk_register(NULL, &super->hw); + clk = tegra_clk_dev_register(&super->hw); if (IS_ERR(clk)) kfree(super);

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 3664593a5ba4..be3c33441cfc 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -6,8 +6,11 @@ #include <linux/io.h> #include <linux/clk-provider.h> #include <linux/clkdev.h> +#include <linux/init.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> #include <linux/clk/tegra.h> #include <linux/delay.h> #include <dt-bindings/clock/tegra20-car.h> @@ -414,7 +417,7 @@ static struct tegra_clk_pll_params pll_e_params = { .fixed_rate = 100000000, };

-static struct tegra_devclk devclks[] __initdata = { +static struct tegra_devclk devclks[] = { { .con_id = "pll_c", .dt_id = TEGRA20_CLK_PLL_C }, { .con_id = "pll_c_out1", .dt_id = TEGRA20_CLK_PLL_C_OUT1 }, { .con_id = "pll_p", .dt_id = TEGRA20_CLK_PLL_P }, @@ -710,13 +713,6 @@ static void tegra20_super_clk_init(void) NULL); clks[TEGRA20_CLK_CCLK] = clk;

- /* SCLK */ - clk = tegra_clk_register_super_mux("sclk", sclk_parents, - ARRAY_SIZE(sclk_parents), - CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, - clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL); - clks[TEGRA20_CLK_SCLK] = clk; - /* twd */ clk = clk_register_fixed_factor(NULL, "twd", "cclk", 0, 1, 4); clks[TEGRA20_CLK_TWD] = clk; @@ -1014,7 +1010,7 @@ static struct tegra_cpu_car_ops tegra20_cpu_car_ops = { #endif };

-static struct tegra_clk_init_table init_table[] __initdata = { +static struct tegra_clk_init_table init_table[] = { { TEGRA20_CLK_PLL_P, TEGRA20_CLK_CLK_MAX, 216000000, 1 }, { TEGRA20_CLK_PLL_P_OUT1, TEGRA20_CLK_CLK_MAX, 28800000, 1 }, { TEGRA20_CLK_PLL_P_OUT2, TEGRA20_CLK_CLK_MAX, 48000000, 1 }, @@ -1052,11 +1048,6 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA20_CLK_CLK_MAX, TEGRA20_CLK_CLK_MAX, 0, 0 }, };

-static void __init tegra20_clock_apply_init_table(void) -{ - tegra_init_from_table(init_table, clks, TEGRA20_CLK_CLK_MAX); -} - /* * Some clocks may be used by different drivers depending on the board * configuration. List those here to register them twice in the clock lookup @@ -1076,6 +1067,8 @@ static const struct of_device_id pmc_match[] __initconst = { { }, };

+static bool tegra20_car_initialized; + static struct clk *tegra20_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data) { @@ -1083,6 +1076,16 @@ static struct clk *tegra20_clk_src_onecell_get(struct of_phandle_args *clkspec, struct clk_hw *hw; struct clk *clk;

+ /* + * Timer clocks are needed early, the rest of the clocks shouldn't be + * available to device drivers until clock tree is fully initialized. + */ + if (clkspec->args[0] != TEGRA20_CLK_RTC && + clkspec->args[0] != TEGRA20_CLK_TWD && + clkspec->args[0] != TEGRA20_CLK_TIMER && + !tegra20_car_initialized) + return ERR_PTR(-EPROBE_DEFER); + clk = of_clk_src_onecell_get(clkspec, data); if (IS_ERR(clk)) return clk; @@ -1149,10 +1152,48 @@ static void __init tegra20_clock_init(struct device_node *np) tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA20_CLK_CLK_MAX);

tegra_add_of_provider(np, tegra20_clk_src_onecell_get); - tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); - - tegra_clk_apply_init_table = tegra20_clock_apply_init_table;

tegra_cpu_car_ops = &tegra20_cpu_car_ops; } -CLK_OF_DECLARE(tegra20, "nvidia,tegra20-car", tegra20_clock_init); +CLK_OF_DECLARE_DRIVER(tegra20, "nvidia,tegra20-car", tegra20_clock_init); + +/* + * Clocks that use runtime PM can't be created at the tegra20_clock_init + * time because drivers' base isn't initialized yet, and thus platform + * devices can't be created for the clocks. Hence we need to split the + * registration of the clocks into two phases. The first phase registers + * essential clocks which don't require RPM and are actually used during + * early boot. The second phase registers clocks which use RPM and this + * is done when device drivers' core API is ready. + */ +static int tegra20_car_probe(struct platform_device *pdev) +{ + struct clk *clk; + + clk = tegra_clk_register_super_mux("sclk", sclk_parents, + ARRAY_SIZE(sclk_parents), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL); + clks[TEGRA20_CLK_SCLK] = clk; + + tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); + tegra_init_from_table(init_table, clks, TEGRA20_CLK_CLK_MAX); + tegra20_car_initialized = true; + + return 0; +} + +static const struct of_device_id tegra20_car_match[] = { + { .compatible = "nvidia,tegra20-car" }, + { } +}; + +static struct platform_driver tegra20_car_driver = { + .driver = { + .name = "tegra20-car", + .of_match_table = tegra20_car_match, + .suppress_bind_attrs = true, + }, + .probe = tegra20_car_probe, +}; +builtin_platform_driver(tegra20_car_driver); diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index 64121bc66d85..04b496123820 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -7,8 +7,11 @@ #include <linux/delay.h> #include <linux/clk-provider.h> #include <linux/clkdev.h> +#include <linux/init.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> #include <linux/clk/tegra.h>

#include <soc/tegra/pmc.h> @@ -532,7 +535,7 @@ static unsigned long tegra30_input_freq[] = { [12] = 26000000, };

-static struct tegra_devclk devclks[] __initdata = { +static struct tegra_devclk devclks[] = { { .con_id = "pll_c", .dt_id = TEGRA30_CLK_PLL_C }, { .con_id = "pll_c_out1", .dt_id = TEGRA30_CLK_PLL_C_OUT1 }, { .con_id = "pll_p", .dt_id = TEGRA30_CLK_PLL_P }, @@ -812,11 +815,6 @@ static void __init tegra30_pll_init(void) { struct clk *clk;

- /* PLLC */ - clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0, - &pll_c_params, NULL); - clks[TEGRA30_CLK_PLL_C] = clk; - /* PLLC_OUT1 */ clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c", clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP, @@ -826,11 +824,6 @@ static void __init tegra30_pll_init(void) 0, NULL); clks[TEGRA30_CLK_PLL_C_OUT1] = clk;

- /* PLLM */ - clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base, - CLK_SET_RATE_GATE, &pll_m_params, NULL); - clks[TEGRA30_CLK_PLL_M] = clk; - /* PLLM_OUT1 */ clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m", clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP, @@ -880,9 +873,6 @@ static void __init tegra30_pll_init(void) ARRAY_SIZE(pll_e_parents), CLK_SET_RATE_NO_REPARENT, clk_base + PLLE_AUX, 2, 1, 0, NULL); - clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base, - CLK_GET_RATE_NOCACHE, &pll_e_params, NULL); - clks[TEGRA30_CLK_PLL_E] = clk; }

static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", @@ -971,14 +961,6 @@ static void __init tegra30_super_clk_init(void) NULL); clks[TEGRA30_CLK_CCLK_LP] = clk;

- /* SCLK */ - clk = tegra_clk_register_super_mux("sclk", sclk_parents, - ARRAY_SIZE(sclk_parents), - CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, - clk_base + SCLK_BURST_POLICY, - 0, 4, 0, 0, NULL); - clks[TEGRA30_CLK_SCLK] = clk; - /* twd */ clk = clk_register_fixed_factor(NULL, "twd", "cclk_g", CLK_SET_RATE_PARENT, 1, 2); @@ -1214,7 +1196,7 @@ static struct tegra_cpu_car_ops tegra30_cpu_car_ops = { #endif };

-static struct tegra_clk_init_table init_table[] __initdata = { +static struct tegra_clk_init_table init_table[] = { { TEGRA30_CLK_UARTA, TEGRA30_CLK_PLL_P, 408000000, 0 }, { TEGRA30_CLK_UARTB, TEGRA30_CLK_PLL_P, 408000000, 0 }, { TEGRA30_CLK_UARTC, TEGRA30_CLK_PLL_P, 408000000, 0 }, @@ -1259,11 +1241,6 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA30_CLK_CLK_MAX, TEGRA30_CLK_CLK_MAX, 0, 0 }, };

-static void __init tegra30_clock_apply_init_table(void) -{ - tegra_init_from_table(init_table, clks, TEGRA30_CLK_CLK_MAX); -} - /* * Some clocks may be used by different drivers depending on the board * configuration. List those here to register them twice in the clock lookup @@ -1294,12 +1271,24 @@ static struct tegra_audio_clk_info tegra30_audio_plls[] = { { "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_p_out1" }, };

+static bool tegra30_car_initialized; + static struct clk *tegra30_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data) { struct clk_hw *hw; struct clk *clk;

+ /* + * Timer clocks are needed early, the rest of the clocks shouldn't be + * available to device drivers until clock tree is fully initialized. + */ + if (clkspec->args[0] != TEGRA30_CLK_RTC && + clkspec->args[0] != TEGRA30_CLK_TWD && + clkspec->args[0] != TEGRA30_CLK_TIMER && + !tegra30_car_initialized) + return ERR_PTR(-EPROBE_DEFER); + clk = of_clk_src_onecell_get(clkspec, data); if (IS_ERR(clk)) return clk; @@ -1357,10 +1346,75 @@ static void __init tegra30_clock_init(struct device_node *np) tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX);

tegra_add_of_provider(np, tegra30_clk_src_onecell_get); + + tegra_cpu_car_ops = &tegra30_cpu_car_ops; +} +CLK_OF_DECLARE_DRIVER(tegra30, "nvidia,tegra30-car", tegra30_clock_init); + +/* + * Clocks that use runtime PM can't be created at the tegra30_clock_init + * time because drivers' base isn't initialized yet, and thus platform + * devices can't be created for the clocks. Hence we need to split the + * registration of the clocks into two phases. The first phase registers + * essential clocks which don't require RPM and are actually used during + * early boot. The second phase registers clocks which use RPM and this + * is done when device drivers' core API is ready. + */ +static int tegra30_car_probe(struct platform_device *pdev) +{ + struct clk *clk; + + /* PLLC */ + clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0, + &pll_c_params, NULL); + clks[TEGRA30_CLK_PLL_C] = clk; + + /* PLLE */ + clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base, + CLK_GET_RATE_NOCACHE, &pll_e_params, NULL); + clks[TEGRA30_CLK_PLL_E] = clk; + + /* PLLM */ + clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base, + CLK_SET_RATE_GATE, &pll_m_params, NULL); + clks[TEGRA30_CLK_PLL_M] = clk; + + /* SCLK */ + clk = tegra_clk_register_super_mux("sclk", sclk_parents, + ARRAY_SIZE(sclk_parents), + CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + clk_base + SCLK_BURST_POLICY, + 0, 4, 0, 0, NULL); + clks[TEGRA30_CLK_SCLK] = clk; + tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); + tegra_init_from_table(init_table, clks, TEGRA30_CLK_CLK_MAX); + tegra30_car_initialized = true;

- tegra_clk_apply_init_table = tegra30_clock_apply_init_table; + return 0; +}

- tegra_cpu_car_ops = &tegra30_cpu_car_ops; +static const struct of_device_id tegra30_car_match[] = { + { .compatible = "nvidia,tegra30-car" }, + { } +}; + +static struct platform_driver tegra30_car_driver = { + .driver = { + .name = "tegra30-car", + .of_match_table = tegra30_car_match, + .suppress_bind_attrs = true, + }, + .probe = tegra30_car_probe, +}; + +/* + * Clock driver must be registered before memory controller driver, + * which doesn't support deferred probing for today and is registered + * from arch init-level. + */ +static int tegra30_car_init(void) +{ + return platform_driver_register(&tegra30_car_driver); } -CLK_OF_DECLARE(tegra30, "nvidia,tegra30-car", tegra30_clock_init); +postcore_initcall(tegra30_car_init); diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c index f6cdce441cf7..26bda45813c0 100644 --- a/drivers/clk/tegra/clk.c +++ b/drivers/clk/tegra/clk.c @@ -9,14 +9,19 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/clk/tegra.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/reset-controller.h> +#include <linux/string.h>

#include <soc/tegra/fuse.h>

#include "clk.h"

/* Global data of Tegra CPU CAR ops */ +static struct device_node *tegra_car_np; static struct tegra_cpu_car_ops dummy_car_ops; struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops;

@@ -261,8 +266,8 @@ void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list, } }

-void __init tegra_init_from_table(struct tegra_clk_init_table *tbl, - struct clk *clks[], int clk_max) +void tegra_init_from_table(struct tegra_clk_init_table *tbl, + struct clk *clks[], int clk_max) { struct clk *clk;

@@ -320,6 +325,8 @@ void __init tegra_add_of_provider(struct device_node *np, { int i;

+ tegra_car_np = np; + for (i = 0; i < clk_num; i++) { if (IS_ERR(clks[i])) { pr_err @@ -348,7 +355,7 @@ void __init tegra_init_special_resets(unsigned int num, special_reset_deassert = deassert; }

-void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num) +void tegra_register_devclks(struct tegra_devclk *dev_clks, int num) { int i;

@@ -372,6 +379,68 @@ struct clk ** __init tegra_lookup_dt_id(int clk_id, return NULL; }

+static struct device_node *tegra_clk_get_of_node(struct clk_hw *hw) +{ + struct device_node *np; + char *node_name; + + node_name = kstrdup(hw->init->name, GFP_KERNEL); + if (!node_name) + return NULL; + + strreplace(node_name, '_', '-'); + + for_each_child_of_node(tegra_car_np, np) { + if (!strcmp(np->name, node_name)) + break; + } + + kfree(node_name); + + return np; +} + +struct clk *tegra_clk_dev_register(struct clk_hw *hw) +{ + struct platform_device *pdev, *parent; + const char *dev_name = NULL; + struct device *dev = NULL; + struct device_node *np; + + np = tegra_clk_get_of_node(hw); + + if (!of_device_is_available(np)) + goto put_node; + + dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name); + if (!dev_name) + goto put_node; + + parent = of_find_device_by_node(tegra_car_np); + if (parent) { + pdev = of_platform_device_create(np, dev_name, &parent->dev); + put_device(&parent->dev); + + if (!pdev) { + pr_err("%s: failed to create device for %pOF\n", + __func__, np); + goto free_name; + } + + dev = &pdev->dev; + pm_runtime_enable(dev); + } else { + WARN(1, "failed to find device for %pOF\n", tegra_car_np); + } + +free_name: + kfree(dev_name); +put_node: + of_node_put(np); + + return clk_register(dev, hw); +} + tegra_clk_apply_init_table_func tegra_clk_apply_init_table;

static int __init tegra_clocks_apply_init_table(void) diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 0c3ba0ccce1a..5d80d8b79b8e 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -927,4 +927,6 @@ struct clk *tegra20_clk_register_emc(void __iomem *ioaddr, bool low_jitter); struct clk *tegra210_clk_register_emc(struct device_node *np, void __iomem *regs);

+struct clk *tegra_clk_dev_register(struct clk_hw *hw); + #endif /* TEGRA_CLK_H */

Document new DVFS OPP table and power domain properties of the Host1x bus and devices sitting on the bus.

Reviewed-by: Rob Herring robh@kernel.org Signed-off-by: Dmitry Osipenko digetx@gmail.com --- .../display/tegra/nvidia,tegra20-host1x.txt | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 8a6d3e1ee306..62861a8fb5c6 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -20,6 +20,18 @@ Required properties: - reset-names: Must include the following entries: - host1x

+Optional properties: +- operating-points-v2: See ../bindings/opp/opp.txt for details. + - power-domains: Phandle to HEG or core power domain. + +For each opp entry in 'operating-points-v2' table of host1x and its modules: +- opp-supported-hw: One bitfield indicating: + On Tegra20: SoC process ID mask + On Tegra30+: SoC speedo ID mask + + A bitwise AND is performed against the value and if any bit + matches, the OPP gets enabled. + Each host1x client module having to perform DMA through the Memory Controller should have the interconnect endpoints set to the Memory Client and External Memory respectively. @@ -45,6 +57,8 @@ of the following host1x client modules: - interconnect-names: Must include name of the interconnect path for each interconnect entry. Consult TRM documentation for information about available memory clients, see MEMORY CONTROLLER section. + - operating-points-v2: See ../bindings/opp/opp.txt for details. + - power-domains: Phandle to MPE power domain.

- vi: video input

@@ -128,6 +142,8 @@ of the following host1x client modules: - interconnect-names: Must include name of the interconnect path for each interconnect entry. Consult TRM documentation for information about available memory clients, see MEMORY CONTROLLER section. + - operating-points-v2: See ../bindings/opp/opp.txt for details. + - power-domains: Phandle to VENC power domain.

- epp: encoder pre-processor

@@ -147,6 +163,8 @@ of the following host1x client modules: - interconnect-names: Must include name of the interconnect path for each interconnect entry. Consult TRM documentation for information about available memory clients, see MEMORY CONTROLLER section. + - operating-points-v2: See ../bindings/opp/opp.txt for details. + - power-domains: Phandle to HEG or core power domain.

- isp: image signal processor

@@ -166,6 +184,7 @@ of the following host1x client modules: - interconnect-names: Must include name of the interconnect path for each interconnect entry. Consult TRM documentation for information about available memory clients, see MEMORY CONTROLLER section. + - power-domains: Phandle to VENC or core power domain.

- gr2d: 2D graphics engine

@@ -185,6 +204,8 @@ of the following host1x client modules: - interconnect-names: Must include name of the interconnect path for each interconnect entry. Consult TRM documentation for information about available memory clients, see MEMORY CONTROLLER section. + - operating-points-v2: See ../bindings/opp/opp.txt for details. + - power-domains: Phandle to HEG or core power domain.

- gr3d: 3D graphics engine

@@ -209,6 +230,8 @@ of the following host1x client modules: - interconnect-names: Must include name of the interconnect path for each interconnect entry. Consult TRM documentation for information about available memory clients, see MEMORY CONTROLLER section. + - operating-points-v2: See ../bindings/opp/opp.txt for details. + - power-domains: Phandles to 3D or core power domain.

- dc: display controller

@@ -241,6 +264,8 @@ of the following host1x client modules: - interconnect-names: Must include name of the interconnect path for each interconnect entry. Consult TRM documentation for information about available memory clients, see MEMORY CONTROLLER section. + - operating-points-v2: See ../bindings/opp/opp.txt for details. + - power-domains: Phandle to core power domain.

- hdmi: High Definition Multimedia Interface

@@ -267,6 +292,7 @@ of the following host1x client modules: - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - nvidia,edid: supplies a binary EDID blob - nvidia,panel: phandle of a display panel + - operating-points-v2: See ../bindings/opp/opp.txt for details.

- tvo: TV encoder output

@@ -277,6 +303,10 @@ of the following host1x client modules: - clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details.

+ Optional properties: + - operating-points-v2: See ../bindings/opp/opp.txt for details. + - power-domains: Phandle to core power domain. + - dsi: display serial interface

Required properties: @@ -305,6 +335,7 @@ of the following host1x client modules: - nvidia,panel: phandle of a display panel - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang up with in order to support up to 8 data lanes + - operating-points-v2: See ../bindings/opp/opp.txt for details.

- sor: serial output resource

@@ -408,6 +439,8 @@ Example: clocks = <&tegra_car TEGRA20_CLK_HOST1X>; resets = <&tegra_car 28>; reset-names = "host1x"; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>;

#address-cells = <1>; #size-cells = <1>; @@ -421,6 +454,8 @@ Example: clocks = <&tegra_car TEGRA20_CLK_MPE>; resets = <&tegra_car 60>; reset-names = "mpe"; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; };

vi@54080000 { @@ -429,6 +464,7 @@ Example: interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; assigned-clocks = <&tegra_car TEGRA210_CLK_VI>; assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + operating-points-v2 = <&dvfs_opp_table>;

clocks = <&tegra_car TEGRA210_CLK_VI>; power-domains = <&pd_venc>; @@ -510,6 +546,8 @@ Example: clocks = <&tegra_car TEGRA20_CLK_EPP>; resets = <&tegra_car 19>; reset-names = "epp"; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; };

isp { @@ -528,6 +566,8 @@ Example: clocks = <&tegra_car TEGRA20_CLK_GR2D>; resets = <&tegra_car 21>; reset-names = "2d"; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; };

gr3d { @@ -536,6 +576,8 @@ Example: clocks = <&tegra_car TEGRA20_CLK_GR3D>; resets = <&tegra_car 24>; reset-names = "3d"; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; };

dc@54200000 { @@ -547,6 +589,8 @@ Example: clock-names = "dc", "parent"; resets = <&tegra_car 27>; reset-names = "dc"; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>;

interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>, <&mc TEGRA20_MC_DISPLAY0B &emc>, @@ -571,6 +615,8 @@ Example: clock-names = "dc", "parent"; resets = <&tegra_car 26>; reset-names = "dc"; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>;

interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>, <&mc TEGRA20_MC_DISPLAY0BB &emc>, @@ -596,6 +642,7 @@ Example: resets = <&tegra_car 51>; reset-names = "hdmi"; status = "disabled"; + operating-points-v2 = <&dvfs_opp_table>; };

tvo { @@ -604,6 +651,7 @@ Example: interrupts = <0 76 0x04>; clocks = <&tegra_car TEGRA20_CLK_TVO>; status = "disabled"; + operating-points-v2 = <&dvfs_opp_table>; };

dsi { @@ -615,6 +663,7 @@ Example: resets = <&tegra_car 48>; reset-names = "dsi"; status = "disabled"; + operating-points-v2 = <&dvfs_opp_table>; }; };

Add runtime PM and OPP support to the Host1x driver. For the starter we will keep host1x always-on because dynamic power management require a major refactoring of the driver code since lot's of code paths are missing the RPM handling and we're going to remove some of these paths in the future.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/gpu/host1x/debug.c | 15 +++ drivers/gpu/host1x/dev.c | 151 +++++++++++++++++++++++------ drivers/gpu/host1x/dev.h | 3 +- drivers/gpu/host1x/hw/channel_hw.c | 44 ++++----- drivers/gpu/host1x/intr.c | 3 - drivers/gpu/host1x/syncpt.c | 5 +- 6 files changed, 165 insertions(+), 56 deletions(-)

diff --git a/drivers/gpu/host1x/debug.c b/drivers/gpu/host1x/debug.c index 8a14880c61bb..18d9c8d206e3 100644 --- a/drivers/gpu/host1x/debug.c +++ b/drivers/gpu/host1x/debug.c @@ -7,6 +7,7 @@ */

#include <linux/debugfs.h> +#include <linux/pm_runtime.h> #include <linux/seq_file.h> #include <linux/uaccess.h>

@@ -52,6 +53,11 @@ static int show_channel(struct host1x_channel *ch, void *data, bool show_fifo) { struct host1x *m = dev_get_drvdata(ch->dev->parent); struct output *o = data; + int err; + + err = pm_runtime_resume_and_get(m->dev); + if (err < 0) + return err;

mutex_lock(&ch->cdma.lock); mutex_lock(&debug_lock); @@ -64,6 +70,8 @@ static int show_channel(struct host1x_channel *ch, void *data, bool show_fifo) mutex_unlock(&debug_lock); mutex_unlock(&ch->cdma.lock);

+ pm_runtime_put(m->dev); + return 0; }

@@ -71,9 +79,14 @@ static void show_syncpts(struct host1x *m, struct output *o) { struct list_head *pos; unsigned int i; + int err;

host1x_debug_output(o, "---- syncpts ----\n");

+ err = pm_runtime_resume_and_get(m->dev); + if (err < 0) + return; + for (i = 0; i < host1x_syncpt_nb_pts(m); i++) { u32 max = host1x_syncpt_read_max(m->syncpt + i); u32 min = host1x_syncpt_load(m->syncpt + i); @@ -101,6 +114,8 @@ static void show_syncpts(struct host1x *m, struct output *o) base_val); }

+ pm_runtime_put(m->dev); + host1x_debug_output(o, "\n"); }

diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c index fbb6447b8659..595b91099e3e 100644 --- a/drivers/gpu/host1x/dev.c +++ b/drivers/gpu/host1x/dev.c @@ -6,14 +6,18 @@ */

#include <linux/clk.h> +#include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/list.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/of.h> +#include <linux/pm_runtime.h> #include <linux/slab.h>

+#include <soc/tegra/common.h> + #define CREATE_TRACE_POINTS #include <trace/events/host1x.h> #undef CREATE_TRACE_POINTS @@ -190,6 +194,9 @@ static void host1x_setup_sid_table(struct host1x *host) const struct host1x_info *info = host->info; unsigned int i;

+ if (!info->has_hypervisor) + return; + for (i = 0; i < info->num_sid_entries; i++) { const struct host1x_sid_entry *entry = &info->sid_table[i];

@@ -347,6 +354,27 @@ static void host1x_iommu_exit(struct host1x *host) } }

+static int host1x_get_resets(struct host1x *host) +{ + int err; + + host->resets[0].id = "mc"; + host->resets[1].id = "host1x"; + host->nresets = ARRAY_SIZE(host->resets); + + err = devm_reset_control_bulk_get_optional_exclusive_released( + host->dev, host->nresets, host->resets); + if (err) { + dev_err(host->dev, "failed to get reset: %d\n", err); + return err; + } + + if (WARN_ON(!host->resets[1].rstc)) + return -ENOENT; + + return 0; +} + static int host1x_probe(struct platform_device *pdev) { struct host1x *host; @@ -423,12 +451,9 @@ static int host1x_probe(struct platform_device *pdev) return err; }

- host->rst = devm_reset_control_get(&pdev->dev, "host1x"); - if (IS_ERR(host->rst)) { - err = PTR_ERR(host->rst); - dev_err(&pdev->dev, "failed to get reset: %d\n", err); + err = host1x_get_resets(host); + if (err) return err; - }

err = host1x_iommu_init(host); if (err < 0) { @@ -443,22 +468,10 @@ static int host1x_probe(struct platform_device *pdev) goto iommu_exit; }

- err = clk_prepare_enable(host->clk); - if (err < 0) { - dev_err(&pdev->dev, "failed to enable clock\n"); - goto free_channels; - } - - err = reset_control_deassert(host->rst); - if (err < 0) { - dev_err(&pdev->dev, "failed to deassert reset: %d\n", err); - goto unprepare_disable; - } - err = host1x_syncpt_init(host); if (err) { dev_err(&pdev->dev, "failed to initialize syncpts\n"); - goto reset_assert; + goto free_channels; }

err = host1x_intr_init(host, syncpt_irq); @@ -467,10 +480,18 @@ static int host1x_probe(struct platform_device *pdev) goto deinit_syncpt; }

- host1x_debug_init(host); + pm_runtime_enable(&pdev->dev); + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + goto pm_disable;

- if (host->info->has_hypervisor) - host1x_setup_sid_table(host); + /* the driver's code isn't ready yet for the dynamic RPM */ + err = pm_runtime_resume_and_get(&pdev->dev); + if (err) + goto pm_disable; + + host1x_debug_init(host);

err = host1x_register(host); if (err < 0) @@ -486,13 +507,14 @@ static int host1x_probe(struct platform_device *pdev) host1x_unregister(host); deinit_debugfs: host1x_debug_deinit(host); + + pm_runtime_put(&pdev->dev); +pm_disable: + pm_runtime_disable(&pdev->dev); + host1x_intr_deinit(host); deinit_syncpt: host1x_syncpt_deinit(host); -reset_assert: - reset_control_assert(host->rst); -unprepare_disable: - clk_disable_unprepare(host->clk); free_channels: host1x_channel_list_free(&host->channel_list); iommu_exit: @@ -507,19 +529,94 @@ static int host1x_remove(struct platform_device *pdev)

host1x_unregister(host); host1x_debug_deinit(host); + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + host1x_intr_deinit(host); host1x_syncpt_deinit(host); - reset_control_assert(host->rst); - clk_disable_unprepare(host->clk); host1x_iommu_exit(host);

return 0; }

+static int __maybe_unused host1x_runtime_suspend(struct device *dev) +{ + struct host1x *host = dev_get_drvdata(dev); + int err; + + host1x_intr_stop(host); + host1x_syncpt_save(host); + + err = reset_control_bulk_assert(host->nresets, host->resets); + if (err) { + dev_err(dev, "failed to assert reset: %d\n", err); + goto resume_host1x; + } + + usleep_range(1000, 2000); + + clk_disable_unprepare(host->clk); + reset_control_bulk_release(host->nresets, host->resets); + + return 0; + +resume_host1x: + host1x_setup_sid_table(host); + host1x_syncpt_restore(host); + host1x_intr_start(host); + + return err; +} + +static int __maybe_unused host1x_runtime_resume(struct device *dev) +{ + struct host1x *host = dev_get_drvdata(dev); + int err; + + err = reset_control_bulk_acquire(host->nresets, host->resets); + if (err) { + dev_err(dev, "failed to acquire reset: %d\n", err); + return err; + } + + err = clk_prepare_enable(host->clk); + if (err) { + dev_err(dev, "failed to enable clock: %d\n", err); + goto release_reset; + } + + err = reset_control_bulk_deassert(host->nresets, host->resets); + if (err < 0) { + dev_err(dev, "failed to deassert reset: %d\n", err); + goto disable_clk; + } + + host1x_setup_sid_table(host); + host1x_syncpt_restore(host); + host1x_intr_start(host); + + return 0; + +disable_clk: + clk_disable_unprepare(host->clk); +release_reset: + reset_control_bulk_release(host->nresets, host->resets); + + return err; +} + +static const struct dev_pm_ops host1x_pm = { + SET_RUNTIME_PM_OPS(host1x_runtime_suspend, host1x_runtime_resume, + NULL) + /* TODO: add system suspend-resume once driver will be ready for that */ +}; + static struct platform_driver tegra_host1x_driver = { .driver = { .name = "tegra-host1x", .of_match_table = host1x_of_match, + .pm = &host1x_pm, }, .probe = host1x_probe, .remove = host1x_remove, diff --git a/drivers/gpu/host1x/dev.h b/drivers/gpu/host1x/dev.h index fa6d4bc46e98..41a7a63514c4 100644 --- a/drivers/gpu/host1x/dev.h +++ b/drivers/gpu/host1x/dev.h @@ -118,7 +118,8 @@ struct host1x { struct host1x_syncpt_base *bases; struct device *dev; struct clk *clk; - struct reset_control *rst; + struct reset_control_bulk_data resets[2]; + unsigned int nresets;

struct iommu_group *group; struct iommu_domain *domain; diff --git a/drivers/gpu/host1x/hw/channel_hw.c b/drivers/gpu/host1x/hw/channel_hw.c index 1999780a7203..6b40e9af1e88 100644 --- a/drivers/gpu/host1x/hw/channel_hw.c +++ b/drivers/gpu/host1x/hw/channel_hw.c @@ -159,6 +159,27 @@ static void host1x_channel_set_streamid(struct host1x_channel *channel) #endif }

+static void host1x_enable_gather_filter(struct host1x_channel *ch) +{ +#if HOST1X_HW >= 6 + struct host1x *host = dev_get_drvdata(ch->dev->parent); + u32 val; + + if (!host->hv_regs) + return; + + val = host1x_hypervisor_readl( + host, HOST1X_HV_CH_KERNEL_FILTER_GBUFFER(ch->id / 32)); + val |= BIT(ch->id % 32); + host1x_hypervisor_writel( + host, val, HOST1X_HV_CH_KERNEL_FILTER_GBUFFER(ch->id / 32)); +#elif HOST1X_HW >= 4 + host1x_ch_writel(ch, + HOST1X_CHANNEL_CHANNELCTRL_KERNEL_FILTER_GBUFFER(1), + HOST1X_CHANNEL_CHANNELCTRL); +#endif +} + static int channel_submit(struct host1x_job *job) { struct host1x_channel *ch = job->channel; @@ -190,6 +211,7 @@ static int channel_submit(struct host1x_job *job) }

host1x_channel_set_streamid(ch); + host1x_enable_gather_filter(ch);

/* begin a CDMA submit */ err = host1x_cdma_begin(&ch->cdma, job); @@ -249,27 +271,6 @@ static int channel_submit(struct host1x_job *job) return err; }

-static void enable_gather_filter(struct host1x *host, - struct host1x_channel *ch) -{ -#if HOST1X_HW >= 6 - u32 val; - - if (!host->hv_regs) - return; - - val = host1x_hypervisor_readl( - host, HOST1X_HV_CH_KERNEL_FILTER_GBUFFER(ch->id / 32)); - val |= BIT(ch->id % 32); - host1x_hypervisor_writel( - host, val, HOST1X_HV_CH_KERNEL_FILTER_GBUFFER(ch->id / 32)); -#elif HOST1X_HW >= 4 - host1x_ch_writel(ch, - HOST1X_CHANNEL_CHANNELCTRL_KERNEL_FILTER_GBUFFER(1), - HOST1X_CHANNEL_CHANNELCTRL); -#endif -} - static int host1x_channel_init(struct host1x_channel *ch, struct host1x *dev, unsigned int index) { @@ -278,7 +279,6 @@ static int host1x_channel_init(struct host1x_channel *ch, struct host1x *dev, #else ch->regs = dev->regs + index * 0x100; #endif - enable_gather_filter(dev, ch); return 0; }

diff --git a/drivers/gpu/host1x/intr.c b/drivers/gpu/host1x/intr.c index 45b6be927ec4..965ba21818b1 100644 --- a/drivers/gpu/host1x/intr.c +++ b/drivers/gpu/host1x/intr.c @@ -297,14 +297,11 @@ int host1x_intr_init(struct host1x *host, unsigned int irq_sync) "host1x_sp_%02u", id); }

- host1x_intr_start(host); - return 0; }

void host1x_intr_deinit(struct host1x *host) { - host1x_intr_stop(host); }

void host1x_intr_start(struct host1x *host) diff --git a/drivers/gpu/host1x/syncpt.c b/drivers/gpu/host1x/syncpt.c index d198a10848c6..e08e331e46ae 100644 --- a/drivers/gpu/host1x/syncpt.c +++ b/drivers/gpu/host1x/syncpt.c @@ -143,6 +143,8 @@ void host1x_syncpt_restore(struct host1x *host) for (i = 0; i < host1x_syncpt_nb_bases(host); i++) host1x_hw_syncpt_restore_wait_base(host, sp_base + i);

+ host1x_hw_syncpt_enable_protection(host); + wmb(); }

@@ -366,9 +368,6 @@ int host1x_syncpt_init(struct host1x *host) host->syncpt = syncpt; host->bases = bases;

- host1x_syncpt_restore(host); - host1x_hw_syncpt_enable_protection(host); - /* Allocate sync point to use for clearing waits for expired fences */ host->nop_sp = host1x_syncpt_alloc(host, 0, "reserved-nop"); if (!host->nop_sp)

Add host1x_channel_stop() which waits till channel becomes idle and then stops the channel hardware. This is needed for supporting suspend/resume by host1x drivers since the hardware state is lost after power-gating, thus the channel needs to be stopped before client enters into suspend.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/gpu/host1x/channel.c | 8 ++++++++ include/linux/host1x.h | 1 + 2 files changed, 9 insertions(+)

diff --git a/drivers/gpu/host1x/channel.c b/drivers/gpu/host1x/channel.c index 4cd212bb570d..2a9a3a8d5931 100644 --- a/drivers/gpu/host1x/channel.c +++ b/drivers/gpu/host1x/channel.c @@ -75,6 +75,14 @@ struct host1x_channel *host1x_channel_get_index(struct host1x *host, return ch; }

+void host1x_channel_stop(struct host1x_channel *channel) +{ + struct host1x *host = dev_get_drvdata(channel->dev->parent); + + host1x_hw_cdma_stop(host, &channel->cdma); +} +EXPORT_SYMBOL(host1x_channel_stop); + static void release_channel(struct kref *kref) { struct host1x_channel *channel = diff --git a/include/linux/host1x.h b/include/linux/host1x.h index 7bccf589aba7..66473b5be0af 100644 --- a/include/linux/host1x.h +++ b/include/linux/host1x.h @@ -181,6 +181,7 @@ struct host1x_job;

struct host1x_channel *host1x_channel_request(struct host1x_client *client); struct host1x_channel *host1x_channel_get(struct host1x_channel *channel); +void host1x_channel_stop(struct host1x_channel *channel); void host1x_channel_put(struct host1x_channel *channel); int host1x_job_submit(struct host1x_job *job);

The HDMI on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now HDMI driver must use OPP API for driving the controller's clock rate because OPP API takes care of reconfiguring the domain's performance state based on HDMI clock rate. Add OPP support to the HDMI driver.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/gpu/drm/tegra/hdmi.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c index e5d2a4026028..9a87d351a828 100644 --- a/drivers/gpu/drm/tegra/hdmi.c +++ b/drivers/gpu/drm/tegra/hdmi.c @@ -11,10 +11,13 @@ #include <linux/math64.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/pm_opp.h> #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/reset.h>

+#include <soc/tegra/common.h> + #include <drm/drm_atomic_helper.h> #include <drm/drm_crtc.h> #include <drm/drm_debugfs.h> @@ -1195,7 +1198,7 @@ static void tegra_hdmi_encoder_enable(struct drm_encoder *encoder) h_back_porch = mode->htotal - mode->hsync_end; h_front_porch = mode->hsync_start - mode->hdisplay;

- err = clk_set_rate(hdmi->clk, hdmi->pixel_clock); + err = dev_pm_opp_set_rate(hdmi->dev, hdmi->pixel_clock); if (err < 0) { dev_err(hdmi->dev, "failed to set HDMI clock frequency: %d\n", err); @@ -1732,7 +1735,14 @@ static int tegra_hdmi_probe(struct platform_device *pdev) }

platform_set_drvdata(pdev, hdmi); - pm_runtime_enable(&pdev->dev); + + err = devm_pm_runtime_enable(&pdev->dev); + if (err) + return err; + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + return err;

INIT_LIST_HEAD(&hdmi->client.list); hdmi->client.ops = &hdmi_client_ops; @@ -1753,8 +1763,6 @@ static int tegra_hdmi_remove(struct platform_device *pdev) struct tegra_hdmi *hdmi = platform_get_drvdata(pdev); int err;

- pm_runtime_disable(&pdev->dev); - err = host1x_client_unregister(&hdmi->client); if (err < 0) { dev_err(&pdev->dev, "failed to unregister host1x client: %d\n",

Add runtime power management and support generic power domains.

Tested-by: Peter Geis pgwipeout@gmail.com # Ouya T30 Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar mattmerhar@protonmail.com # Ouya T30 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/gpu/drm/tegra/gr3d.c | 388 ++++++++++++++++++++++++++++++----- 1 file changed, 332 insertions(+), 56 deletions(-)

diff --git a/drivers/gpu/drm/tegra/gr3d.c b/drivers/gpu/drm/tegra/gr3d.c index 24442ade0da3..5879402ae55e 100644 --- a/drivers/gpu/drm/tegra/gr3d.c +++ b/drivers/gpu/drm/tegra/gr3d.c @@ -5,32 +5,47 @@ */

#include <linux/clk.h> +#include <linux/delay.h> #include <linux/host1x.h> #include <linux/iommu.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_opp.h> +#include <linux/pm_runtime.h> #include <linux/reset.h>

+#include <soc/tegra/common.h> #include <soc/tegra/pmc.h>

#include "drm.h" #include "gem.h" #include "gr3d.h"

+enum { + RST_MC, + RST_GR3D, + RST_MC2, + RST_GR3D2, + RST_GR3D_MAX, +}; + struct gr3d_soc { unsigned int version; + unsigned int num_clocks; + unsigned int num_resets; };

struct gr3d { struct tegra_drm_client client; struct host1x_channel *channel; - struct clk *clk_secondary; - struct clk *clk; - struct reset_control *rst_secondary; - struct reset_control *rst;

const struct gr3d_soc *soc; + struct clk_bulk_data *clocks; + unsigned int nclocks; + struct reset_control_bulk_data resets[RST_GR3D_MAX]; + unsigned int nresets;

DECLARE_BITMAP(addr_regs, GR3D_NUM_REGS); }; @@ -109,16 +124,24 @@ static int gr3d_open_channel(struct tegra_drm_client *client, struct tegra_drm_context *context) { struct gr3d *gr3d = to_gr3d(client); + int err;

context->channel = host1x_channel_get(gr3d->channel); if (!context->channel) return -ENOMEM;

+ err = pm_runtime_resume_and_get(client->base.dev); + if (err) { + host1x_channel_put(context->channel); + return err; + } + return 0; }

static void gr3d_close_channel(struct tegra_drm_context *context) { + pm_runtime_put_sync(context->client->base.dev); host1x_channel_put(context->channel); }

@@ -155,14 +178,20 @@ static const struct tegra_drm_client_ops gr3d_ops = {

static const struct gr3d_soc tegra20_gr3d_soc = { .version = 0x20, + .num_clocks = 1, + .num_resets = 2, };

static const struct gr3d_soc tegra30_gr3d_soc = { .version = 0x30, + .num_clocks = 2, + .num_resets = 4, };

static const struct gr3d_soc tegra114_gr3d_soc = { .version = 0x35, + .num_clocks = 1, + .num_resets = 2, };

static const struct of_device_id tegra_gr3d_match[] = { @@ -278,69 +307,240 @@ static const u32 gr3d_addr_regs[] = { GR3D_GLOBAL_SAMP23SURFADDR(15), };

-static int gr3d_probe(struct platform_device *pdev) +static int gr3d_power_up_legacy_domain(struct device *dev, const char *name, + unsigned int id) { - struct device_node *np = pdev->dev.of_node; - struct host1x_syncpt **syncpts; - struct gr3d *gr3d; + struct gr3d *gr3d = dev_get_drvdata(dev); + struct reset_control *reset; + struct clk *clk; unsigned int i; int err;

- gr3d = devm_kzalloc(&pdev->dev, sizeof(*gr3d), GFP_KERNEL); - if (!gr3d) - return -ENOMEM; - - gr3d->soc = of_device_get_match_data(&pdev->dev); + /* + * Tegra20 device-tree doesn't specify 3d clock name and there is only + * one clock for Tegra20. Tegra30+ device-trees always specified names + * for the clocks. + */ + if (gr3d->nclocks == 1) { + if (id == TEGRA_POWERGATE_3D1) + return 0; + + clk = gr3d->clocks[0].clk; + } else { + for (i = 0; i < gr3d->nclocks; i++) { + if (WARN_ON(!gr3d->clocks[i].id)) + continue; + + if (!strcmp(gr3d->clocks[i].id, name)) { + clk = gr3d->clocks[i].clk; + break; + } + }

- syncpts = devm_kzalloc(&pdev->dev, sizeof(*syncpts), GFP_KERNEL); - if (!syncpts) - return -ENOMEM; + if (WARN_ON(i == gr3d->nclocks)) + return -EINVAL; + }

- gr3d->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(gr3d->clk)) { - dev_err(&pdev->dev, "cannot get clock\n"); - return PTR_ERR(gr3d->clk); + /* + * We use array of resets, which includes MC resets, and MC + * reset shouldn't be asserted while hardware is gated because + * MC flushing will fail for gated hardware. Hence for legacy + * PD we request the individual reset separately. + */ + reset = reset_control_get_exclusive_released(dev, name); + if (IS_ERR(reset)) + return PTR_ERR(reset); + + err = reset_control_acquire(reset); + if (err) { + dev_err(dev, "failed to acquire %s reset: %d\n", name, err); + } else { + err = tegra_powergate_sequence_power_up(id, clk, reset); + reset_control_release(reset); }

- gr3d->rst = devm_reset_control_get(&pdev->dev, "3d"); - if (IS_ERR(gr3d->rst)) { - dev_err(&pdev->dev, "cannot get reset\n"); - return PTR_ERR(gr3d->rst); + reset_control_put(reset); + if (err) + return err; + + /* + * tegra_powergate_sequence_power_up() leaves clocks enabled + * while GENPD not, hence keep clock-enable balanced. + */ + clk_disable_unprepare(clk); + + return 0; +} + +static void gr3d_del_link(void *link) +{ + device_link_del(link); +} + +static int gr3d_init_power(struct device *dev, struct gr3d *gr3d) +{ + static const char * const opp_genpd_names[] = { "3d0", "3d1", NULL }; + const u32 link_flags = DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME; + struct device **opp_virt_devs, *pd_dev; + struct device_link *link; + unsigned int i; + int err; + + err = of_count_phandle_with_args(dev->of_node, "power-domains", + "#power-domain-cells"); + if (err < 0) { + if (err != -ENOENT) + return err; + + /* + * Older device-trees don't use GENPD. In this case we should + * toggle power domain manually. + */ + err = gr3d_power_up_legacy_domain(dev, "3d", + TEGRA_POWERGATE_3D); + if (err) + return err; + + err = gr3d_power_up_legacy_domain(dev, "3d2", + TEGRA_POWERGATE_3D1); + if (err) + return err; + + return 0; }

- if (of_device_is_compatible(np, "nvidia,tegra30-gr3d")) { - gr3d->clk_secondary = devm_clk_get(&pdev->dev, "3d2"); - if (IS_ERR(gr3d->clk_secondary)) { - dev_err(&pdev->dev, "cannot get secondary clock\n"); - return PTR_ERR(gr3d->clk_secondary); + /* + * The PM domain core automatically attaches a single power domain, + * otherwise it skips attaching completely. We have a single domain + * on Tegra20 and two domains on Tegra30+. + */ + if (dev->pm_domain) + return 0; + + err = devm_pm_opp_attach_genpd(dev, opp_genpd_names, &opp_virt_devs); + if (err) + return err; + + for (i = 0; opp_genpd_names[i]; i++) { + pd_dev = opp_virt_devs[i]; + if (!pd_dev) { + dev_err(dev, "failed to get %s power domain\n", + opp_genpd_names[i]); + return -EINVAL; }

- gr3d->rst_secondary = devm_reset_control_get(&pdev->dev, - "3d2"); - if (IS_ERR(gr3d->rst_secondary)) { - dev_err(&pdev->dev, "cannot get secondary reset\n"); - return PTR_ERR(gr3d->rst_secondary); + link = device_link_add(dev, pd_dev, link_flags); + if (!link) { + dev_err(dev, "failed to link to %s\n", dev_name(pd_dev)); + return -EINVAL; } + + err = devm_add_action_or_reset(dev, gr3d_del_link, link); + if (err) + return err; }

- err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D, gr3d->clk, - gr3d->rst); + return 0; +} + +static int gr3d_set_opp(struct dev_pm_set_opp_data *data) +{ + struct gr3d *gr3d = dev_get_drvdata(data->dev); + unsigned int i; + int err; + + for (i = 0; i < gr3d->nclocks; i++) { + err = clk_set_rate(gr3d->clocks[i].clk, data->new_opp.rate); + if (err) { + dev_err(data->dev, "failed to set %s rate to %lu: %d\n", + gr3d->clocks[i].id, data->new_opp.rate, err); + goto restore; + } + } + + return 0; + +restore: + while (i--) + clk_set_rate(gr3d->clocks[i].clk, data->old_opp.rate); + + return err; +} + +static int gr3d_get_clocks(struct device *dev, struct gr3d *gr3d) +{ + int err; + + err = devm_clk_bulk_get_all(dev, &gr3d->clocks); if (err < 0) { - dev_err(&pdev->dev, "failed to power up 3D unit\n"); + dev_err(dev, "failed to get clock: %d\n", err); return err; } + gr3d->nclocks = err;

- if (gr3d->clk_secondary) { - err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D1, - gr3d->clk_secondary, - gr3d->rst_secondary); - if (err < 0) { - dev_err(&pdev->dev, - "failed to power up secondary 3D unit\n"); - return err; - } + if (gr3d->nclocks != gr3d->soc->num_clocks) { + dev_err(dev, "invalid number of clocks: %u\n", gr3d->nclocks); + return -ENOENT; }

+ return 0; +} + +static int gr3d_get_resets(struct device *dev, struct gr3d *gr3d) +{ + int err; + + gr3d->resets[RST_MC].id = "mc"; + gr3d->resets[RST_MC2].id = "mc2"; + gr3d->resets[RST_GR3D].id = "3d"; + gr3d->resets[RST_GR3D2].id = "3d2"; + gr3d->nresets = gr3d->soc->num_resets; + + err = devm_reset_control_bulk_get_optional_exclusive_released( + dev, gr3d->nresets, gr3d->resets); + if (err) { + dev_err(dev, "failed to get reset: %d\n", err); + return err; + } + + if (WARN_ON(!gr3d->resets[RST_GR3D].rstc) || + WARN_ON(!gr3d->resets[RST_GR3D2].rstc && gr3d->nresets == 4)) + return -ENOENT; + + return 0; +} + +static int gr3d_probe(struct platform_device *pdev) +{ + struct host1x_syncpt **syncpts; + struct gr3d *gr3d; + unsigned int i; + int err; + + gr3d = devm_kzalloc(&pdev->dev, sizeof(*gr3d), GFP_KERNEL); + if (!gr3d) + return -ENOMEM; + + platform_set_drvdata(pdev, gr3d); + + gr3d->soc = of_device_get_match_data(&pdev->dev); + + syncpts = devm_kzalloc(&pdev->dev, sizeof(*syncpts), GFP_KERNEL); + if (!syncpts) + return -ENOMEM; + + err = gr3d_get_clocks(&pdev->dev, gr3d); + if (err) + return err; + + err = gr3d_get_resets(&pdev->dev, gr3d); + if (err) + return err; + + err = gr3d_init_power(&pdev->dev, gr3d); + if (err) + return err; + INIT_LIST_HEAD(&gr3d->client.base.list); gr3d->client.base.ops = &gr3d_client_ops; gr3d->client.base.dev = &pdev->dev; @@ -352,20 +552,36 @@ static int gr3d_probe(struct platform_device *pdev) gr3d->client.version = gr3d->soc->version; gr3d->client.ops = &gr3d_ops;

+ pm_runtime_enable(&pdev->dev); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 200); + + err = devm_pm_opp_register_set_opp_helper(&pdev->dev, gr3d_set_opp); + if (err) + goto disable_rpm; + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + goto disable_rpm; + err = host1x_client_register(&gr3d->client.base); if (err < 0) { dev_err(&pdev->dev, "failed to register host1x client: %d\n", err); - return err; + goto disable_rpm; }

/* initialize address register map */ for (i = 0; i < ARRAY_SIZE(gr3d_addr_regs); i++) set_bit(gr3d_addr_regs[i], gr3d->addr_regs);

- platform_set_drvdata(pdev, gr3d); - return 0; + +disable_rpm: + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return err; }

static int gr3d_remove(struct platform_device *pdev) @@ -380,23 +596,83 @@ static int gr3d_remove(struct platform_device *pdev) return err; }

- if (gr3d->clk_secondary) { - reset_control_assert(gr3d->rst_secondary); - tegra_powergate_power_off(TEGRA_POWERGATE_3D1); - clk_disable_unprepare(gr3d->clk_secondary); + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static int __maybe_unused gr3d_runtime_suspend(struct device *dev) +{ + struct gr3d *gr3d = dev_get_drvdata(dev); + int err; + + host1x_channel_stop(gr3d->channel); + + err = reset_control_bulk_assert(gr3d->nresets, gr3d->resets); + if (err) { + dev_err(dev, "failed to assert reset: %d\n", err); + return err; + } + + usleep_range(10, 20); + + /* + * Older device-trees don't specify MC resets and power-gating can't + * be done safely in that case. Hence we will keep the power ungated + * for older DTBs. For newer DTBs, GENPD will perform the power-gating. + */ + + clk_bulk_disable_unprepare(gr3d->nclocks, gr3d->clocks); + reset_control_bulk_release(gr3d->nresets, gr3d->resets); + + return 0; +} + +static int __maybe_unused gr3d_runtime_resume(struct device *dev) +{ + struct gr3d *gr3d = dev_get_drvdata(dev); + int err; + + err = reset_control_bulk_acquire(gr3d->nresets, gr3d->resets); + if (err) { + dev_err(dev, "failed to acquire reset: %d\n", err); + return err; + } + + err = clk_bulk_prepare_enable(gr3d->nclocks, gr3d->clocks); + if (err) { + dev_err(dev, "failed to enable clock: %d\n", err); + goto release_reset; }

- reset_control_assert(gr3d->rst); - tegra_powergate_power_off(TEGRA_POWERGATE_3D); - clk_disable_unprepare(gr3d->clk); + err = reset_control_bulk_deassert(gr3d->nresets, gr3d->resets); + if (err) { + dev_err(dev, "failed to deassert reset: %d\n", err); + goto disable_clk; + }

return 0; + +disable_clk: + clk_bulk_disable_unprepare(gr3d->nclocks, gr3d->clocks); +release_reset: + reset_control_bulk_release(gr3d->nresets, gr3d->resets); + + return err; }

+static const struct dev_pm_ops tegra_gr3d_pm = { + SET_RUNTIME_PM_OPS(gr3d_runtime_suspend, gr3d_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + struct platform_driver tegra_gr3d_driver = { .driver = { .name = "tegra-gr3d", .of_match_table = tegra_gr3d_match, + .pm = &tegra_gr3d_pm, }, .probe = gr3d_probe, .remove = gr3d_remove,

The Tegra USB controller belongs to the core power domain and we're going to enable GENPD support for the core domain. Now USB controller must be resumed using runtime PM API in order to initialize the USB power state. We already support runtime PM for the CI device, but CI's PM is separated from the RPM managed by tegra-usb driver. Add runtime PM and OPP support to the driver.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/usb/chipidea/ci_hdrc_tegra.c | 53 ++++++++++++++++++++++++---- 1 file changed, 46 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c index 60361141ac04..3142ef7ebe42 100644 --- a/drivers/usb/chipidea/ci_hdrc_tegra.c +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c @@ -7,6 +7,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/pm_runtime.h> #include <linux/reset.h>

#include <linux/usb.h> @@ -15,6 +16,8 @@ #include <linux/usb/of.h> #include <linux/usb/phy.h>

+#include <soc/tegra/common.h> + #include "../host/ehci.h"

#include "ci.h" @@ -278,6 +281,8 @@ static int tegra_usb_probe(struct platform_device *pdev) if (!usb) return -ENOMEM;

+ platform_set_drvdata(pdev, usb); + soc = of_device_get_match_data(&pdev->dev); if (!soc) { dev_err(&pdev->dev, "failed to match OF data\n"); @@ -296,11 +301,17 @@ static int tegra_usb_probe(struct platform_device *pdev) return err; }

- err = clk_prepare_enable(usb->clk); - if (err < 0) { - dev_err(&pdev->dev, "failed to enable clock: %d\n", err); + err = devm_pm_runtime_enable(&pdev->dev); + if (err) + return err; + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + return err; + + err = pm_runtime_resume_and_get(&pdev->dev); + if (err) return err; - }

if (device_property_present(&pdev->dev, "nvidia,needs-double-reset")) usb->needs_double_reset = true; @@ -320,8 +331,6 @@ static int tegra_usb_probe(struct platform_device *pdev) if (err) goto fail_power_off;

- platform_set_drvdata(pdev, usb); - /* setup and register ChipIdea HDRC device */ usb->soc = soc; usb->data.name = "tegra-usb"; @@ -350,7 +359,8 @@ static int tegra_usb_probe(struct platform_device *pdev) phy_shutdown: usb_phy_shutdown(usb->phy); fail_power_off: - clk_disable_unprepare(usb->clk); + pm_runtime_put(&pdev->dev); + return err; }

@@ -360,15 +370,44 @@ static int tegra_usb_remove(struct platform_device *pdev)

ci_hdrc_remove_device(usb->dev); usb_phy_shutdown(usb->phy); + pm_runtime_put(&pdev->dev); + + return 0; +} + +static int __maybe_unused tegra_usb_runtime_resume(struct device *dev) +{ + struct tegra_usb *usb = dev_get_drvdata(dev); + int err; + + err = clk_prepare_enable(usb->clk); + if (err < 0) { + dev_err(dev, "failed to enable clock: %d\n", err); + return err; + } + + return 0; +} + +static int __maybe_unused tegra_usb_runtime_suspend(struct device *dev) +{ + struct tegra_usb *usb = dev_get_drvdata(dev); + clk_disable_unprepare(usb->clk);

return 0; }

+static const struct dev_pm_ops tegra_usb_pm = { + SET_RUNTIME_PM_OPS(tegra_usb_runtime_suspend, tegra_usb_runtime_resume, + NULL) +}; + static struct platform_driver tegra_usb_driver = { .driver = { .name = "tegra-usb", .of_match_table = tegra_usb_of_match, + .pm = &tegra_usb_pm, }, .probe = tegra_usb_probe, .remove = tegra_usb_remove,

The GMI bus on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now GMI must be resumed using runtime PM API in order to initialize the GMI power state. Add runtime PM and OPP support to the GMI driver.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/bus/tegra-gmi.c | 52 ++++++++++++++++++++++++++++++++++++----- 1 file changed, 46 insertions(+), 6 deletions(-)

diff --git a/drivers/bus/tegra-gmi.c b/drivers/bus/tegra-gmi.c index a6570789f7af..72ef8a8c236b 100644 --- a/drivers/bus/tegra-gmi.c +++ b/drivers/bus/tegra-gmi.c @@ -13,8 +13,11 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/pm_runtime.h> #include <linux/reset.h>

+#include <soc/tegra/common.h> + #define TEGRA_GMI_CONFIG 0x00 #define TEGRA_GMI_CONFIG_GO BIT(31) #define TEGRA_GMI_BUS_WIDTH_32BIT BIT(30) @@ -54,9 +57,9 @@ static int tegra_gmi_enable(struct tegra_gmi *gmi) { int err;

- err = clk_prepare_enable(gmi->clk); - if (err < 0) { - dev_err(gmi->dev, "failed to enable clock: %d\n", err); + err = pm_runtime_resume_and_get(gmi->dev); + if (err) { + pm_runtime_disable(gmi->dev); return err; }

@@ -83,7 +86,8 @@ static void tegra_gmi_disable(struct tegra_gmi *gmi) writel(config, gmi->base + TEGRA_GMI_CONFIG);

reset_control_assert(gmi->rst); - clk_disable_unprepare(gmi->clk); + + pm_runtime_put(gmi->dev); }

static int tegra_gmi_parse_dt(struct tegra_gmi *gmi) @@ -213,6 +217,7 @@ static int tegra_gmi_probe(struct platform_device *pdev) if (!gmi) return -ENOMEM;

+ platform_set_drvdata(pdev, gmi); gmi->dev = dev;

res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -232,6 +237,14 @@ static int tegra_gmi_probe(struct platform_device *pdev) return PTR_ERR(gmi->rst); }

+ err = devm_pm_runtime_enable(gmi->dev); + if (err) + return err; + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + return err; + err = tegra_gmi_parse_dt(gmi); if (err) return err; @@ -247,8 +260,6 @@ static int tegra_gmi_probe(struct platform_device *pdev) return err; }

- platform_set_drvdata(pdev, gmi); - return 0; }

@@ -262,6 +273,34 @@ static int tegra_gmi_remove(struct platform_device *pdev) return 0; }

+static int __maybe_unused tegra_gmi_runtime_resume(struct device *dev) +{ + struct tegra_gmi *gmi = dev_get_drvdata(dev); + int err; + + err = clk_prepare_enable(gmi->clk); + if (err < 0) { + dev_err(gmi->dev, "failed to enable clock: %d\n", err); + return err; + } + + return 0; +} + +static int __maybe_unused tegra_gmi_runtime_suspend(struct device *dev) +{ + struct tegra_gmi *gmi = dev_get_drvdata(dev); + + clk_disable_unprepare(gmi->clk); + + return 0; +} + +static const struct dev_pm_ops tegra_gmi_pm = { + SET_RUNTIME_PM_OPS(tegra_gmi_runtime_suspend, tegra_gmi_runtime_resume, + NULL) +}; + static const struct of_device_id tegra_gmi_id_table[] = { { .compatible = "nvidia,tegra20-gmi", }, { .compatible = "nvidia,tegra30-gmi", }, @@ -275,6 +314,7 @@ static struct platform_driver tegra_gmi_driver = { .driver = { .name = "tegra-gmi", .of_match_table = tegra_gmi_id_table, + .pm = &tegra_gmi_pm, }, }; module_platform_driver(tegra_gmi_driver);

The PWM on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now PWM must be resumed using runtime PM API in order to initialize the PWM power state. The PWM clock rate must be changed using OPP API that will reconfigure the power domain performance state in accordance to the rate. Add runtime PM and OPP support to the PWM driver.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/pwm/pwm-tegra.c | 88 ++++++++++++++++++++++++++++++++--------- 1 file changed, 70 insertions(+), 18 deletions(-)

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 11a10b575ace..afb5ecde007e 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -42,12 +42,16 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pm_opp.h> #include <linux/pwm.h> #include <linux/platform_device.h> #include <linux/pinctrl/consumer.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/reset.h>

+#include <soc/tegra/common.h> + #define PWM_ENABLE (1 << 31) #define PWM_DUTY_WIDTH 8 #define PWM_DUTY_SHIFT 16 @@ -145,7 +149,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, required_clk_rate = (NSEC_PER_SEC / period_ns) << PWM_DUTY_WIDTH;

- err = clk_set_rate(pc->clk, required_clk_rate); + err = dev_pm_opp_set_rate(pc->dev, required_clk_rate); if (err < 0) return -EINVAL;

@@ -181,8 +185,8 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, * before writing the register. Otherwise, keep it enabled. */ if (!pwm_is_enabled(pwm)) { - err = clk_prepare_enable(pc->clk); - if (err < 0) + err = pm_runtime_resume_and_get(pc->dev); + if (err) return err; } else val |= PWM_ENABLE; @@ -193,7 +197,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, * If the PWM is not enabled, turn the clock off again to save power. */ if (!pwm_is_enabled(pwm)) - clk_disable_unprepare(pc->clk); + pm_runtime_put(pc->dev);

return 0; } @@ -204,8 +208,8 @@ static int tegra_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) int rc = 0; u32 val;

- rc = clk_prepare_enable(pc->clk); - if (rc < 0) + rc = pm_runtime_resume_and_get(pc->dev); + if (rc) return rc;

val = pwm_readl(pc, pwm->hwpwm); @@ -224,7 +228,7 @@ static void tegra_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) val &= ~PWM_ENABLE; pwm_writel(pc, pwm->hwpwm, val);

- clk_disable_unprepare(pc->clk); + pm_runtime_put_sync(pc->dev); }

static const struct pwm_ops tegra_pwm_ops = { @@ -256,11 +260,23 @@ static int tegra_pwm_probe(struct platform_device *pdev) if (IS_ERR(pwm->clk)) return PTR_ERR(pwm->clk);

+ ret = devm_pm_runtime_enable(&pdev->dev); + if (ret) + return ret; + + ret = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (ret) + return ret; + + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret) + return ret; + /* Set maximum frequency of the IP */ - ret = clk_set_rate(pwm->clk, pwm->soc->max_frequency); + ret = dev_pm_opp_set_rate(pwm->dev, pwm->soc->max_frequency); if (ret < 0) { dev_err(&pdev->dev, "Failed to set max frequency: %d\n", ret); - return ret; + goto put_pm; }

/* @@ -278,7 +294,7 @@ static int tegra_pwm_probe(struct platform_device *pdev) if (IS_ERR(pwm->rst)) { ret = PTR_ERR(pwm->rst); dev_err(&pdev->dev, "Reset control is not found: %d\n", ret); - return ret; + goto put_pm; }

reset_control_deassert(pwm->rst); @@ -291,34 +307,67 @@ static int tegra_pwm_probe(struct platform_device *pdev) if (ret < 0) { dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); reset_control_assert(pwm->rst); - return ret; + goto put_pm; }

+ pm_runtime_put(&pdev->dev); + return 0; +put_pm: + pm_runtime_put(&pdev->dev); + return ret; }

static int tegra_pwm_remove(struct platform_device *pdev) { struct tegra_pwm_chip *pc = platform_get_drvdata(pdev); + int err;

pwmchip_remove(&pc->chip);

+ err = pm_runtime_resume_and_get(pc->dev); + if (err) + return err; + reset_control_assert(pc->rst); + pm_runtime_put(pc->dev);

return 0; }

-#ifdef CONFIG_PM_SLEEP -static int tegra_pwm_suspend(struct device *dev) +static int __maybe_unused tegra_pwm_runtime_suspend(struct device *dev) { - return pinctrl_pm_select_sleep_state(dev); + struct tegra_pwm_chip *pc = dev_get_drvdata(dev); + int err; + + clk_disable_unprepare(pc->clk); + + err = pinctrl_pm_select_sleep_state(dev); + if (err) { + clk_prepare_enable(pc->clk); + return err; + } + + return 0; }

-static int tegra_pwm_resume(struct device *dev) +static int __maybe_unused tegra_pwm_runtime_resume(struct device *dev) { - return pinctrl_pm_select_default_state(dev); + struct tegra_pwm_chip *pc = dev_get_drvdata(dev); + int err; + + err = pinctrl_pm_select_default_state(dev); + if (err) + return err; + + err = clk_prepare_enable(pc->clk); + if (err) { + pinctrl_pm_select_sleep_state(dev); + return err; + } + + return 0; } -#endif

static const struct tegra_pwm_soc tegra20_pwm_soc = { .num_channels = 4, @@ -344,7 +393,10 @@ static const struct of_device_id tegra_pwm_of_match[] = { MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);

static const struct dev_pm_ops tegra_pwm_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(tegra_pwm_suspend, tegra_pwm_resume) + SET_RUNTIME_PM_OPS(tegra_pwm_runtime_suspend, tegra_pwm_runtime_resume, + NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) };

static struct platform_driver tegra_pwm_driver = {

The NAND on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now NAND must be resumed using runtime PM API in order to initialize the NAND power state. Add runtime PM and OPP support to the NAND driver.

Acked-by: Miquel Raynal miquel.raynal@bootlin.com Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/mtd/nand/raw/tegra_nand.c | 55 ++++++++++++++++++++++++++----- 1 file changed, 47 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c index 32431bbe69b8..098fcc9cb9df 100644 --- a/drivers/mtd/nand/raw/tegra_nand.c +++ b/drivers/mtd/nand/raw/tegra_nand.c @@ -17,8 +17,11 @@ #include <linux/mtd/rawnand.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/reset.h>

+#include <soc/tegra/common.h> + #define COMMAND 0x00 #define COMMAND_GO BIT(31) #define COMMAND_CLE BIT(30) @@ -1151,6 +1154,7 @@ static int tegra_nand_probe(struct platform_device *pdev) return -ENOMEM;

ctrl->dev = &pdev->dev; + platform_set_drvdata(pdev, ctrl); nand_controller_init(&ctrl->controller); ctrl->controller.ops = &tegra_nand_controller_ops;

@@ -1166,14 +1170,22 @@ static int tegra_nand_probe(struct platform_device *pdev) if (IS_ERR(ctrl->clk)) return PTR_ERR(ctrl->clk);

- err = clk_prepare_enable(ctrl->clk); + err = devm_pm_runtime_enable(&pdev->dev); + if (err) + return err; + + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (err) + return err; + + err = pm_runtime_resume_and_get(&pdev->dev); if (err) return err;

err = reset_control_reset(rst); if (err) { dev_err(ctrl->dev, "Failed to reset HW: %d\n", err); - goto err_disable_clk; + goto err_put_pm; }

writel_relaxed(HWSTATUS_CMD_DEFAULT, ctrl->regs + HWSTATUS_CMD); @@ -1188,21 +1200,19 @@ static int tegra_nand_probe(struct platform_device *pdev) dev_name(&pdev->dev), ctrl); if (err) { dev_err(ctrl->dev, "Failed to get IRQ: %d\n", err); - goto err_disable_clk; + goto err_put_pm; }

writel_relaxed(DMA_MST_CTRL_IS_DONE, ctrl->regs + DMA_MST_CTRL);

err = tegra_nand_chips_init(ctrl->dev, ctrl); if (err) - goto err_disable_clk; - - platform_set_drvdata(pdev, ctrl); + goto err_put_pm;

return 0;

-err_disable_clk: - clk_disable_unprepare(ctrl->clk); +err_put_pm: + pm_runtime_put(ctrl->dev); return err; }

@@ -1219,11 +1229,39 @@ static int tegra_nand_remove(struct platform_device *pdev)

nand_cleanup(chip);

+ pm_runtime_put(ctrl->dev); + + return 0; +} + +static int __maybe_unused tegra_nand_runtime_resume(struct device *dev) +{ + struct tegra_nand_controller *ctrl = dev_get_drvdata(dev); + int err; + + err = clk_prepare_enable(ctrl->clk); + if (err) { + dev_err(dev, "Failed to enable clock: %d\n", err); + return err; + } + + return 0; +} + +static int __maybe_unused tegra_nand_runtime_suspend(struct device *dev) +{ + struct tegra_nand_controller *ctrl = dev_get_drvdata(dev); + clk_disable_unprepare(ctrl->clk);

return 0; }

+static const struct dev_pm_ops tegra_nand_pm = { + SET_RUNTIME_PM_OPS(tegra_nand_runtime_suspend, tegra_nand_runtime_resume, + NULL) +}; + static const struct of_device_id tegra_nand_of_match[] = { { .compatible = "nvidia,tegra20-nand" }, { /* sentinel */ } @@ -1234,6 +1272,7 @@ static struct platform_driver tegra_nand_driver = { .driver = { .name = "tegra-nand", .of_match_table = tegra_nand_of_match, + .pm = &tegra_nand_pm, }, .probe = tegra_nand_probe, .remove = tegra_nand_remove,

The SPI on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now SPI driver must use OPP API for driving the controller's clock rate because OPP API takes care of reconfiguring the domain's performance state in accordance to the rate. Add OPP support to the driver.

Acked-by: Mark Brown broonie@kernel.org Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/spi/spi-tegra20-slink.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 3226c4e1c7c0..eea1853010e8 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -18,12 +18,15 @@ #include <linux/kthread.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm_opp.h> #include <linux/pm_runtime.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/reset.h> #include <linux/spi/spi.h>

+#include <soc/tegra/common.h> + #define SLINK_COMMAND 0x000 #define SLINK_BIT_LENGTH(x) (((x) & 0x1f) << 0) #define SLINK_WORD_SIZE(x) (((x) & 0x1f) << 5) @@ -680,7 +683,7 @@ static int tegra_slink_start_transfer_one(struct spi_device *spi, bits_per_word = t->bits_per_word; speed = t->speed_hz; if (speed != tspi->cur_speed) { - clk_set_rate(tspi->clk, speed * 4); + dev_pm_opp_set_rate(tspi->dev, speed * 4); tspi->cur_speed = speed; }

@@ -1082,6 +1085,11 @@ static int tegra_slink_probe(struct platform_device *pdev) init_completion(&tspi->xfer_completion);

pm_runtime_enable(&pdev->dev); + + ret = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); + if (ret) + goto exit_pm_disable; + ret = pm_runtime_resume_and_get(&pdev->dev); if (ret) { dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret);

Document new OPP table and power domain properties of the video decoder hardware.

Reviewed-by: Rob Herring robh@kernel.org Acked-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Dmitry Osipenko digetx@gmail.com --- .../devicetree/bindings/media/nvidia,tegra-vde.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml index 3b6c1f031e04..0b7d4d815707 100644 --- a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml +++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml @@ -68,6 +68,16 @@ properties: description: Phandle of the SRAM MMIO node.

+ operating-points-v2: + description: + Should contain freqs and voltages and opp-supported-hw property, + which is a bitfield indicating SoC speedo or process ID mask. + + power-domains: + maxItems: 1 + description: + Phandle to the SoC core power domain. + required: - compatible - reg @@ -104,4 +114,6 @@ examples: reset-names = "vde", "mc"; resets = <&rst 61>, <&mem 13>; iommus = <&mem 15>; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; };

The FUSE controller is enabled at a boot time. Reset it in order to put hardware and clock into clean and disabled state.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/soc/tegra/fuse/fuse-tegra.c | 25 +++++++++++++++++++++++++ drivers/soc/tegra/fuse/fuse.h | 1 + 2 files changed, 26 insertions(+)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c index f2151815db58..cc032729a143 100644 --- a/drivers/soc/tegra/fuse/fuse-tegra.c +++ b/drivers/soc/tegra/fuse/fuse-tegra.c @@ -14,6 +14,7 @@ #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/sys_soc.h>

@@ -243,6 +244,30 @@ static int tegra_fuse_probe(struct platform_device *pdev) goto restore; }

+ fuse->rst = devm_reset_control_get_optional(&pdev->dev, "fuse"); + if (IS_ERR(fuse->rst)) { + err = PTR_ERR(fuse->rst); + dev_err(&pdev->dev, "failed to get FUSE reset: %pe\n", + fuse->rst); + goto restore; + } + + /* + * FUSE clock is enabled at a boot time, hence this resume/suspend + * disables the clock besides the h/w resetting. + */ + err = pm_runtime_resume_and_get(&pdev->dev); + if (err) + goto restore; + + err = reset_control_reset(fuse->rst); + pm_runtime_put(&pdev->dev); + + if (err < 0) { + dev_err(&pdev->dev, "failed to reset FUSE: %d\n", err); + goto restore; + } + /* release the early I/O memory mapping */ iounmap(base);

diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h index de58feba0435..1b719d85bd04 100644 --- a/drivers/soc/tegra/fuse/fuse.h +++ b/drivers/soc/tegra/fuse/fuse.h @@ -43,6 +43,7 @@ struct tegra_fuse { void __iomem *base; phys_addr_t phys; struct clk *clk; + struct reset_control *rst;

u32 (*read_early)(struct tegra_fuse *fuse, unsigned int offset); u32 (*read)(struct tegra_fuse *fuse, unsigned int offset);

Depending on hardware version, Tegra SoC may require a higher voltages during resume from system suspend, otherwise hardware will crash. Set SoC voltages to a nominal levels during suspend.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/soc/tegra/regulators-tegra20.c | 99 ++++++++++++++++++++ drivers/soc/tegra/regulators-tegra30.c | 122 +++++++++++++++++++++++++ 2 files changed, 221 insertions(+)

diff --git a/drivers/soc/tegra/regulators-tegra20.c b/drivers/soc/tegra/regulators-tegra20.c index b8ce9fd0650d..6a2f90ab9d3e 100644 --- a/drivers/soc/tegra/regulators-tegra20.c +++ b/drivers/soc/tegra/regulators-tegra20.c @@ -16,7 +16,9 @@ #include <linux/regulator/coupler.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> +#include <linux/suspend.h>

+#include <soc/tegra/fuse.h> #include <soc/tegra/pmc.h>

struct tegra_regulator_coupler { @@ -25,9 +27,12 @@ struct tegra_regulator_coupler { struct regulator_dev *cpu_rdev; struct regulator_dev *rtc_rdev; struct notifier_block reboot_notifier; + struct notifier_block suspend_notifier; int core_min_uV, cpu_min_uV; bool sys_reboot_mode_req; bool sys_reboot_mode; + bool sys_suspend_mode_req; + bool sys_suspend_mode; };

static inline struct tegra_regulator_coupler * @@ -105,6 +110,28 @@ static int tegra20_core_rtc_max_spread(struct regulator_dev *core_rdev, return 150000; }

+static int tegra20_cpu_nominal_uV(void) +{ + switch (tegra_sku_info.soc_speedo_id) { + case 0: + return 1100000; + case 1: + return 1025000; + default: + return 1125000; + } +} + +static int tegra20_core_nominal_uV(void) +{ + switch (tegra_sku_info.soc_speedo_id) { + default: + return 1225000; + case 2: + return 1300000; + } +} + static int tegra20_core_rtc_update(struct tegra_regulator_coupler *tegra, struct regulator_dev *core_rdev, struct regulator_dev *rtc_rdev, @@ -144,6 +171,11 @@ static int tegra20_core_rtc_update(struct tegra_regulator_coupler *tegra, if (err) return err;

+ /* prepare voltage level for suspend */ + if (tegra->sys_suspend_mode) + core_min_uV = clamp(tegra20_core_nominal_uV(), + core_min_uV, core_max_uV); + core_uV = regulator_get_voltage_rdev(core_rdev); if (core_uV < 0) return core_uV; @@ -279,6 +311,11 @@ static int tegra20_cpu_voltage_update(struct tegra_regulator_coupler *tegra, if (tegra->sys_reboot_mode) cpu_min_uV = max(cpu_min_uV, tegra->cpu_min_uV);

+ /* prepare voltage level for suspend */ + if (tegra->sys_suspend_mode) + cpu_min_uV = clamp(tegra20_cpu_nominal_uV(), + cpu_min_uV, cpu_max_uV); + if (cpu_min_uV > cpu_uV) { err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev, cpu_uV, cpu_min_uV); @@ -320,6 +357,7 @@ static int tegra20_regulator_balance_voltage(struct regulator_coupler *coupler, }

tegra->sys_reboot_mode = READ_ONCE(tegra->sys_reboot_mode_req); + tegra->sys_suspend_mode = READ_ONCE(tegra->sys_suspend_mode_req);

if (rdev == cpu_rdev) return tegra20_cpu_voltage_update(tegra, cpu_rdev, @@ -334,6 +372,63 @@ static int tegra20_regulator_balance_voltage(struct regulator_coupler *coupler, return -EPERM; }

+static int tegra20_regulator_prepare_suspend(struct tegra_regulator_coupler *tegra, + bool sys_suspend_mode) +{ + int err; + + if (!tegra->core_rdev || !tegra->rtc_rdev || !tegra->cpu_rdev) + return 0; + + /* + * All power domains are enabled early during resume from suspend + * by GENPD core. Domains like VENC may require a higher voltage + * when enabled during resume from suspend. This also prepares + * hardware for resuming from LP0. + */ + + WRITE_ONCE(tegra->sys_suspend_mode_req, sys_suspend_mode); + + err = regulator_sync_voltage_rdev(tegra->cpu_rdev); + if (err) + return err; + + err = regulator_sync_voltage_rdev(tegra->core_rdev); + if (err) + return err; + + return 0; +} + +static int tegra20_regulator_suspend(struct notifier_block *notifier, + unsigned long mode, void *arg) +{ + struct tegra_regulator_coupler *tegra; + int ret = 0; + + tegra = container_of(notifier, struct tegra_regulator_coupler, + suspend_notifier); + + switch (mode) { + case PM_HIBERNATION_PREPARE: + case PM_RESTORE_PREPARE: + case PM_SUSPEND_PREPARE: + ret = tegra20_regulator_prepare_suspend(tegra, true); + break; + + case PM_POST_HIBERNATION: + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + ret = tegra20_regulator_prepare_suspend(tegra, false); + break; + } + + if (ret) + pr_err("failed to prepare regulators: %d\n", ret); + + return notifier_from_errno(ret); +} + static int tegra20_regulator_prepare_reboot(struct tegra_regulator_coupler *tegra, bool sys_reboot_mode) { @@ -444,6 +539,7 @@ static struct tegra_regulator_coupler tegra20_coupler = { .balance_voltage = tegra20_regulator_balance_voltage, }, .reboot_notifier.notifier_call = tegra20_regulator_reboot, + .suspend_notifier.notifier_call = tegra20_regulator_suspend, };

static int __init tegra_regulator_coupler_init(void) @@ -456,6 +552,9 @@ static int __init tegra_regulator_coupler_init(void) err = register_reboot_notifier(&tegra20_coupler.reboot_notifier); WARN_ON(err);

+ err = register_pm_notifier(&tegra20_coupler.suspend_notifier); + WARN_ON(err); + return regulator_coupler_register(&tegra20_coupler.coupler); } arch_initcall(tegra_regulator_coupler_init); diff --git a/drivers/soc/tegra/regulators-tegra30.c b/drivers/soc/tegra/regulators-tegra30.c index e74bbc9c7859..8fd43c689134 100644 --- a/drivers/soc/tegra/regulators-tegra30.c +++ b/drivers/soc/tegra/regulators-tegra30.c @@ -16,6 +16,7 @@ #include <linux/regulator/coupler.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> +#include <linux/suspend.h>

#include <soc/tegra/fuse.h> #include <soc/tegra/pmc.h> @@ -25,9 +26,12 @@ struct tegra_regulator_coupler { struct regulator_dev *core_rdev; struct regulator_dev *cpu_rdev; struct notifier_block reboot_notifier; + struct notifier_block suspend_notifier; int core_min_uV, cpu_min_uV; bool sys_reboot_mode_req; bool sys_reboot_mode; + bool sys_suspend_mode_req; + bool sys_suspend_mode; };

static inline struct tegra_regulator_coupler * @@ -113,6 +117,52 @@ static int tegra30_core_cpu_limit(int cpu_uV) return -EINVAL; }

+static int tegra30_cpu_nominal_uV(void) +{ + switch (tegra_sku_info.cpu_speedo_id) { + case 10 ... 11: + return 850000; + + case 9: + return 912000; + + case 1 ... 3: + case 7 ... 8: + return 1050000; + + default: + return 1125000; + + case 4 ... 6: + case 12 ... 13: + return 1237000; + } +} + +static int tegra30_core_nominal_uV(void) +{ + switch (tegra_sku_info.soc_speedo_id) { + case 0: + return 1200000; + + case 1: + if (tegra_sku_info.cpu_speedo_id != 7 && + tegra_sku_info.cpu_speedo_id != 8) + return 1200000; + + fallthrough; + + case 2: + if (tegra_sku_info.cpu_speedo_id != 13) + return 1300000; + + return 1350000; + + default: + return 1250000; + } +} + static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra, struct regulator_dev *cpu_rdev, struct regulator_dev *core_rdev) @@ -168,6 +218,11 @@ static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra, if (err) return err;

+ /* prepare voltage level for suspend */ + if (tegra->sys_suspend_mode) + core_min_uV = clamp(tegra30_core_nominal_uV(), + core_min_uV, core_max_uV); + core_uV = regulator_get_voltage_rdev(core_rdev); if (core_uV < 0) return core_uV; @@ -223,6 +278,11 @@ static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra, if (tegra->sys_reboot_mode) cpu_min_uV = max(cpu_min_uV, tegra->cpu_min_uV);

+ /* prepare voltage level for suspend */ + if (tegra->sys_suspend_mode) + cpu_min_uV = clamp(tegra30_cpu_nominal_uV(), + cpu_min_uV, cpu_max_uV); + if (core_min_limited_uV > core_uV) { pr_err("core voltage constraint violated: %d %d %d\n", core_uV, core_min_limited_uV, cpu_uV); @@ -292,10 +352,68 @@ static int tegra30_regulator_balance_voltage(struct regulator_coupler *coupler, }

tegra->sys_reboot_mode = READ_ONCE(tegra->sys_reboot_mode_req); + tegra->sys_suspend_mode = READ_ONCE(tegra->sys_suspend_mode_req);

return tegra30_voltage_update(tegra, cpu_rdev, core_rdev); }

+static int tegra30_regulator_prepare_suspend(struct tegra_regulator_coupler *tegra, + bool sys_suspend_mode) +{ + int err; + + if (!tegra->core_rdev || !tegra->cpu_rdev) + return 0; + + /* + * All power domains are enabled early during resume from suspend + * by GENPD core. Domains like VENC may require a higher voltage + * when enabled during resume from suspend. This also prepares + * hardware for resuming from LP0. + */ + + WRITE_ONCE(tegra->sys_suspend_mode_req, sys_suspend_mode); + + err = regulator_sync_voltage_rdev(tegra->cpu_rdev); + if (err) + return err; + + err = regulator_sync_voltage_rdev(tegra->core_rdev); + if (err) + return err; + + return 0; +} + +static int tegra30_regulator_suspend(struct notifier_block *notifier, + unsigned long mode, void *arg) +{ + struct tegra_regulator_coupler *tegra; + int ret = 0; + + tegra = container_of(notifier, struct tegra_regulator_coupler, + suspend_notifier); + + switch (mode) { + case PM_HIBERNATION_PREPARE: + case PM_RESTORE_PREPARE: + case PM_SUSPEND_PREPARE: + ret = tegra30_regulator_prepare_suspend(tegra, true); + break; + + case PM_POST_HIBERNATION: + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + ret = tegra30_regulator_prepare_suspend(tegra, false); + break; + } + + if (ret) + pr_err("failed to prepare regulators: %d\n", ret); + + return notifier_from_errno(ret); +} + static int tegra30_regulator_prepare_reboot(struct tegra_regulator_coupler *tegra, bool sys_reboot_mode) { @@ -395,6 +513,7 @@ static struct tegra_regulator_coupler tegra30_coupler = { .balance_voltage = tegra30_regulator_balance_voltage, }, .reboot_notifier.notifier_call = tegra30_regulator_reboot, + .suspend_notifier.notifier_call = tegra30_regulator_suspend, };

static int __init tegra_regulator_coupler_init(void) @@ -407,6 +526,9 @@ static int __init tegra_regulator_coupler_init(void) err = register_reboot_notifier(&tegra30_coupler.reboot_notifier); WARN_ON(err);

+ err = register_pm_notifier(&tegra30_coupler.suspend_notifier); + WARN_ON(err); + return regulator_coupler_register(&tegra30_coupler.coupler); } arch_initcall(tegra_regulator_coupler_init);

CORE power domain uses name of device-tree node, which is inconsistent with the names of PMC domains. Set the name to "core" to make it consistent.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- drivers/soc/tegra/pmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 6759f19b9cd6..3e52ceada60c 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -1353,7 +1353,7 @@ static int tegra_pmc_core_pd_add(struct tegra_pmc *pmc, struct device_node *np) if (!genpd) return -ENOMEM;

- genpd->name = np->name; + genpd->name = "core"; genpd->set_performance_state = tegra_pmc_core_pd_set_performance_state; genpd->opp_to_performance_state = tegra_pmc_core_pd_opp_to_performance_state;

Add OPP tables and power domains to all peripheral devices which support power management on Tegra20 SoC.

Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- .../boot/dts/tegra20-acer-a500-picasso.dts | 1 + arch/arm/boot/dts/tegra20-colibri.dtsi | 3 +- arch/arm/boot/dts/tegra20-harmony.dts | 3 +- arch/arm/boot/dts/tegra20-paz00.dts | 1 + .../arm/boot/dts/tegra20-peripherals-opp.dtsi | 941 ++++++++++++++++++ arch/arm/boot/dts/tegra20-seaboard.dts | 3 +- arch/arm/boot/dts/tegra20-tamonten.dtsi | 3 +- arch/arm/boot/dts/tegra20-trimslice.dts | 9 + arch/arm/boot/dts/tegra20-ventana.dts | 1 + arch/arm/boot/dts/tegra20.dtsi | 100 ++ 10 files changed, 1061 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index 2280d75b66ab..1dbeabcb8b74 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -713,6 +713,7 @@ pmc@7000e400 { nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <458>; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; };

usb@c5000000 { diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi index 585a5b441cf6..4ec403aa5f2e 100644 --- a/arch/arm/boot/dts/tegra20-colibri.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri.dtsi @@ -495,7 +495,7 @@ reg_3v3_vsys: sys { regulator-always-on; };

- sm0 { + vdd_core: sm0 { regulator-name = "VDD_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -601,6 +601,7 @@ pmc@7000e400 { nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <3875>; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>;

/* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */ i2c-thermtrip { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index ae4312eedcbd..b21bab437ebd 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -339,7 +339,7 @@ sys_reg: sys { regulator-always-on; };

- sm0 { + vdd_core: sm0 { regulator-name = "vdd_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -565,6 +565,7 @@ pmc@7000e400 { nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <3875>; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; };

pcie@80003000 { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index acc816bfd233..c8e4439d3dfb 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -519,6 +519,7 @@ pmc@7000e400 { nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <0>; nvidia,sys-clock-req-active-high; + core-supply = <&core_vdd_reg>; };

usb@c5000000 { diff --git a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi index ef3ad2e5f270..ff8c3dcba8e9 100644 --- a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi @@ -1,6 +1,46 @@ // SPDX-License-Identifier: GPL-2.0

/ { + core_opp_table: core-power-domain-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + core_opp_950: opp@950000 { + opp-microvolt = <950000 950000 1300000>; + opp-level = <950000>; + }; + + core_opp_1000: opp@1000000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-level = <1000000>; + }; + + core_opp_1100: opp@1100000 { + opp-microvolt = <1100000 1100000 1300000>; + opp-level = <1100000>; + }; + + core_opp_1200: opp@1200000 { + opp-microvolt = <1200000 1200000 1300000>; + opp-level = <1200000>; + }; + + core_opp_1225: opp@1225000 { + opp-microvolt = <1225000 1225000 1300000>; + opp-level = <1225000>; + }; + + core_opp_1275: opp@1275000 { + opp-microvolt = <1275000 1275000 1300000>; + opp-level = <1275000>; + }; + + core_opp_1300: opp@1300000 { + opp-microvolt = <1300000 1300000 1300000>; + opp-level = <1300000>; + }; + }; + emc_icc_dvfs_opp_table: emc-dvfs-opp-table { compatible = "operating-points-v2";

@@ -8,66 +48,77 @@ opp@36000000 { opp-microvolt = <950000 950000 1300000>; opp-hz = /bits/ 64 <36000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; };

opp@47500000 { opp-microvolt = <950000 950000 1300000>; opp-hz = /bits/ 64 <47500000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; };

opp@50000000 { opp-microvolt = <950000 950000 1300000>; opp-hz = /bits/ 64 <50000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; };

opp@54000000 { opp-microvolt = <950000 950000 1300000>; opp-hz = /bits/ 64 <54000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; };

opp@57000000 { opp-microvolt = <950000 950000 1300000>; opp-hz = /bits/ 64 <57000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; };

opp@100000000 { opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <100000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; };

opp@108000000 { opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <108000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; };

opp@126666000 { opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <126666000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; };

opp@150000000 { opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <150000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; };

opp@190000000 { opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <190000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; };

opp@216000000 { opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <216000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; opp-suspend; };

@@ -75,36 +126,926 @@ opp@300000000 { opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <300000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; };

opp@333000000 { opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <333000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; };

opp@380000000 { opp-microvolt = <1100000 1100000 1300000>; opp-hz = /bits/ 64 <380000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; };

opp@600000000 { opp-microvolt = <1200000 1200000 1300000>; opp-hz = /bits/ 64 <600000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; };

opp@666000000 { opp-microvolt = <1200000 1200000 1300000>; opp-hz = /bits/ 64 <666000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; };

opp@760000000 { opp-microvolt = <1300000 1300000 1300000>; opp-hz = /bits/ 64 <760000000>; opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1300>; + }; + }; + + gr2d_dvfs_opp_table: gr2d-opp-table { + compatible = "operating-points-v2"; + + opp@133000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@171000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <171000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@247000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <247000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + + opp@300000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + gr3d_dvfs_opp_table: gr3d-opp-table { + compatible = "operating-points-v2"; + + opp@114000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <114000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp@161500000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <161500000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp@161500000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <161500000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_950>; + }; + + opp@209000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <209000000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1000>; + }; + + opp@218500000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <218500000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_950>; + }; + + opp@247000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <247000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp@247000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <247000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_950>; + }; + + opp@256500000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <256500000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1000>; + }; + + opp@285000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1100>; + }; + + opp@285000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1000>; + }; + + opp@304000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <304000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1200>; + }; + + opp@323000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <323000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1100>; + }; + + opp@333500000,1275 { + opp-microvolt = <1275000 1275000 1300000>; + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1275>; + }; + + opp@333500000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <333500000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1200>; + }; + + opp@351500000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <351500000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1100>; + }; + + opp@361000000,1275 { + opp-microvolt = <1275000 1275000 1300000>; + opp-hz = /bits/ 64 <361000000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1275>; + }; + + opp@380000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <380000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1200>; + }; + + opp@400000000,1275 { + opp-microvolt = <1275000 1275000 1300000>; + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1275>; + }; + + opp@400000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1200>; + }; + }; + + disp1_dvfs_opp_table: disp1-opp-table { + compatible = "operating-points-v2"; + + opp@158000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <158000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@190000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <190000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + disp2_dvfs_opp_table: disp2-opp-table { + compatible = "operating-points-v2"; + + opp@158000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <158000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@190000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <190000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + dsi_dvfs_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp@100000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@500000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <500000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + epp_dvfs_opp_table: epp-opp-table { + compatible = "operating-points-v2"; + + opp@133000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@171000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <171000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@247000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <247000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + + opp@300000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + hdmi_dvfs_opp_table: hdmi-opp-table { + compatible = "operating-points-v2"; + + opp@148500000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <148500000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + host1x_dvfs_opp_table: host1x-opp-table { + compatible = "operating-points-v2"; + + opp@104500000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <104500000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@133000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@166000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <166000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + ide_dvfs_opp_table: ide-opp-table { + compatible = "operating-points-v2"; + + opp@100000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + mipi_dvfs_opp_table: mipi-opp-table { + compatible = "operating-points-v2"; + + opp@40000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <40000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@60000000,1275 { + opp-microvolt = <1275000 1275000 1300000>; + opp-hz = /bits/ 64 <60000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1275>; + }; + }; + + mpe_dvfs_opp_table: mpe-opp-table { + compatible = "operating-points-v2"; + + opp@104500000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <104500000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp@142500000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <142500000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_950>; + }; + + opp@152000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <152000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp@190000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <190000000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1000>; + }; + + opp@190000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <190000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_950>; + }; + + opp@228000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <228000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp@228000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <228000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_950>; + }; + + opp@237500000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <237500000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1000>; + }; + + opp@266000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <266000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1000>; + }; + + opp@275500000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <275500000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1100>; + }; + + opp@300000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0003>; + required-opps = <&core_opp_1200>; + }; + + opp@300000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x000C>; + required-opps = <&core_opp_1100>; + }; + }; + + ndflash_dvfs_opp_table: ndflash-opp-table { + compatible = "operating-points-v2"; + + opp@130000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <130000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@150000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <150000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@158000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <158000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + + opp@164000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <164000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + nor_dvfs_opp_table: nor-opp-table { + compatible = "operating-points-v2"; + + opp@92000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <92000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + pcie_dvfs_opp_table: pcie-opp-table { + compatible = "operating-points-v2"; + + opp@250000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <250000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + sdmmc1_dvfs_opp_table: sdmmc1-opp-table { + compatible = "operating-points-v2"; + + opp@44000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <44000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + sdmmc2_dvfs_opp_table: sdmmc2-opp-table { + compatible = "operating-points-v2"; + + opp@44000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <44000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + sdmmc3_dvfs_opp_table: sdmmc3-opp-table { + compatible = "operating-points-v2"; + + opp@44000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <44000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + sdmmc4_dvfs_opp_table: sdmmc4-opp-table { + compatible = "operating-points-v2"; + + opp@44000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <44000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@52000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <52000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + }; + + sclk_dvfs_opp_table: sclk-opp-table { + compatible = "operating-points-v2"; + + opp@95000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <95000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp@123500000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <123500000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_950>; + }; + + opp@133000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp@152000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <152000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_950>; + }; + + opp@159500000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <159500000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1000>; + }; + + opp@171000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <171000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_950>; + }; + + opp@180500000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <180500000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1000>; + }; + + opp@190000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <190000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp@207000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <207000000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1100>; + }; + + opp@218500000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <218500000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1000>; + }; + + opp@222500000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <222500000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1200>; + }; + + opp@229500000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <229500000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1100>; + }; + + opp@240000000,1225 { + opp-microvolt = <1225000 1225000 1300000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1225>; + }; + + opp@240000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <240000000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1200>; + }; + + opp@247000000,1275 { + opp-microvolt = <1275000 1275000 1300000>; + opp-hz = /bits/ 64 <247000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1275>; + }; + + opp@256500000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <256500000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1100>; + }; + + opp@260000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <260000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1200>; + }; + + opp@262000000,1300 { + opp-microvolt = <1300000 1300000 1300000>; + opp-hz = /bits/ 64 <262000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1300>; + }; + + opp@264000000,1275 { + opp-microvolt = <1275000 1275000 1300000>; + opp-hz = /bits/ 64 <264000000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1275>; + }; + + opp@277500000,1300 { + opp-microvolt = <1300000 1300000 1300000>; + opp-hz = /bits/ 64 <277500000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1300>; + }; + + opp@285000000,1275 { + opp-microvolt = <1275000 1275000 1300000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1275>; + }; + + opp@292500000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <292500000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1200>; + }; + + opp@300000000,1300 { + opp-microvolt = <1300000 1300000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1300>; + }; + + opp@300000000,1275 { + opp-microvolt = <1275000 1275000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1275>; + }; + }; + + tvo_dvfs_opp_table: tvo-opp-table { + compatible = "operating-points-v2"; + + opp@250000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <250000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1200>; + }; + }; + + usbd_dvfs_opp_table: usbd-opp-table { + compatible = "operating-points-v2"; + + opp@480000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + usb2_dvfs_opp_table: usb2-opp-table { + compatible = "operating-points-v2"; + + opp@480000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + usb3_dvfs_opp_table: usb3-opp-table { + compatible = "operating-points-v2"; + + opp@480000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <480000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; + }; + }; + + vde_dvfs_opp_table: vde-opp-table { + compatible = "operating-points-v2"; + + opp@95000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <95000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_950>; + }; + + opp@123500000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <123500000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1000>; + }; + + opp@123500000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <123500000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_950>; + }; + + opp@152000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <152000000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1000>; + }; + + opp@152000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <152000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_950>; + }; + + opp@171000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <171000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_950>; + }; + + opp@209000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <209000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1100>; + }; + + opp@209000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <209000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1000>; + }; + + opp@218500000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <218500000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1000>; + }; + + opp@237500000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <237500000>; + opp-supported-hw = <0x0002>; + required-opps = <&core_opp_1100>; + }; + + opp@275500000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <275500000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1200>; + }; + + opp@285000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <285000000>; + opp-supported-hw = <0x0004>; + required-opps = <&core_opp_1100>; + }; + + opp@300000000,1275 { + opp-microvolt = <1275000 1275000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0001>; + required-opps = <&core_opp_1275>; + }; + + opp@300000000,1200 { + opp-microvolt = <1200000 1200000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0006>; + required-opps = <&core_opp_1200>; + }; + + opp@300000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1100>; + }; + }; + + vi_dvfs_opp_table: vi-opp-table { + compatible = "operating-points-v2"; + + opp@85000000,950 { + opp-microvolt = <950000 950000 1300000>; + opp-hz = /bits/ 64 <85000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_950>; + }; + + opp@100000000,1000 { + opp-microvolt = <1000000 1000000 1300000>; + opp-hz = /bits/ 64 <100000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1000>; + }; + + opp@150000000,1100 { + opp-microvolt = <1100000 1100000 1300000>; + opp-hz = /bits/ 64 <150000000>; + opp-supported-hw = <0x000F>; + required-opps = <&core_opp_1100>; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 92d494b8c3d2..5aeb7bb6c415 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -444,7 +444,7 @@ sys_reg: sys { regulator-always-on; };

- sm0 { + vdd_core: sm0 { regulator-name = "vdd_sm0,vdd_core"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; @@ -689,6 +689,7 @@ pmc@7000e400 { nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <3875>; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; };

memory-controller@7000f400 { diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index dd4d506683de..d5888d958175 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -357,7 +357,7 @@ sys_reg: sys { regulator-always-on; };

- sm0 { + vdd_core: sm0 { regulator-name = "vdd_sys_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -477,6 +477,7 @@ pmc@7000e400 { nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <3875>; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; };

pcie@80003000 { diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 4bc87bc0c2a4..582dc7910ff8 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -321,6 +321,7 @@ pmc@7000e400 { nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <3875>; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; };

pcie@80003000 { @@ -444,6 +445,14 @@ pci_vdd_reg: regulator@4 { regulator-always-on; };

+ vdd_core: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "vdd_core"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + sound { compatible = "nvidia,tegra-audio-trimslice"; nvidia,i2s-controller = <&tegra_i2s1>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 5a2578b3707f..e41ce1b1ec3f 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -544,6 +544,7 @@ pmc@7000e400 { nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <458>; nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; };

usb@c5000000 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 6ce498178105..ce38055a8952 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -42,6 +42,8 @@ host1x@50000000 { clock-names = "host1x"; resets = <&tegra_car 28>; reset-names = "host1x"; + operating-points-v2 = <&host1x_dvfs_opp_table>; + power-domains = <&pd_core>;

#address-cells = <1>; #size-cells = <1>; @@ -55,6 +57,8 @@ mpe@54040000 { clocks = <&tegra_car TEGRA20_CLK_MPE>; resets = <&tegra_car 60>; reset-names = "mpe"; + operating-points-v2 = <&mpe_dvfs_opp_table>; + power-domains = <&pd_mpe>; };

vi@54080000 { @@ -64,6 +68,8 @@ vi@54080000 { clocks = <&tegra_car TEGRA20_CLK_VI>; resets = <&tegra_car 20>; reset-names = "vi"; + operating-points-v2 = <&vi_dvfs_opp_table>; + power-domains = <&pd_venc>; };

epp@540c0000 { @@ -73,6 +79,8 @@ epp@540c0000 { clocks = <&tegra_car TEGRA20_CLK_EPP>; resets = <&tegra_car 19>; reset-names = "epp"; + operating-points-v2 = <&epp_dvfs_opp_table>; + power-domains = <&pd_core>; };

isp@54100000 { @@ -82,6 +90,7 @@ isp@54100000 { clocks = <&tegra_car TEGRA20_CLK_ISP>; resets = <&tegra_car 23>; reset-names = "isp"; + power-domains = <&pd_venc>; };

gr2d@54140000 { @@ -91,6 +100,8 @@ gr2d@54140000 { clocks = <&tegra_car TEGRA20_CLK_GR2D>; resets = <&tegra_car 21>; reset-names = "2d"; + operating-points-v2 = <&gr2d_dvfs_opp_table>; + power-domains = <&pd_core>; };

gr3d@54180000 { @@ -99,6 +110,8 @@ gr3d@54180000 { clocks = <&tegra_car TEGRA20_CLK_GR3D>; resets = <&tegra_car 24>; reset-names = "3d"; + operating-points-v2 = <&gr3d_dvfs_opp_table>; + power-domains = <&pd_3d>; };

dc@54200000 { @@ -110,6 +123,8 @@ dc@54200000 { clock-names = "dc", "parent"; resets = <&tegra_car 27>; reset-names = "dc"; + operating-points-v2 = <&disp1_dvfs_opp_table>; + power-domains = <&pd_core>;

nvidia,head = <0>;

@@ -138,6 +153,8 @@ dc@54240000 { clock-names = "dc", "parent"; resets = <&tegra_car 26>; reset-names = "dc"; + operating-points-v2 = <&disp2_dvfs_opp_table>; + power-domains = <&pd_core>;

nvidia,head = <1>;

@@ -166,6 +183,8 @@ hdmi@54280000 { clock-names = "hdmi", "parent"; resets = <&tegra_car 51>; reset-names = "hdmi"; + operating-points-v2 = <&hdmi_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -174,6 +193,8 @@ tvo@542c0000 { reg = <0x542c0000 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA20_CLK_TVO>; + operating-points-v2 = <&tvo_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -185,6 +206,8 @@ dsi@54300000 { clock-names = "dsi", "parent"; resets = <&tegra_car 48>; reset-names = "dsi"; + operating-points-v2 = <&dsi_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; }; }; @@ -242,6 +265,13 @@ tegra_car: clock@60006000 { reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + + sclk { + compatible = "nvidia,tegra20-sclk"; + operating-points-v2 = <&sclk_dvfs_opp_table>; + clocks = <&tegra_car TEGRA20_CLK_SCLK>; + power-domains = <&pd_core>; + }; };

flow-controller@60007000 { @@ -319,6 +349,8 @@ vde@6001a000 { clocks = <&tegra_car TEGRA20_CLK_VDE>; reset-names = "vde", "mc"; resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>; + operating-points-v2 = <&vde_dvfs_opp_table>; + power-domains = <&pd_vde>; };

apbmisc@70000800 { @@ -460,6 +492,8 @@ nand-controller@70008000 { reset-names = "nand"; assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>; assigned-clock-rates = <150000000>; + operating-points-v2 = <&ndflash_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -473,6 +507,8 @@ gmi@70009000 { clock-names = "gmi"; resets = <&tegra_car 42>; reset-names = "gmi"; + operating-points-v2 = <&nor_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -643,6 +679,52 @@ tegra_pmc: pmc@7000e400 { clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; #clock-cells = <1>; + + pd_core: core-domain { + operating-points-v2 = <&core_opp_table>; + #power-domain-cells = <0>; + }; + + powergates { + pd_3d: td { + clocks = <&tegra_car TEGRA20_CLK_GR3D>; + resets = <&mc TEGRA20_MC_RESET_3D>, + <&tegra_car TEGRA20_CLK_GR3D>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_venc: venc { + clocks = <&tegra_car TEGRA20_CLK_ISP>, + <&tegra_car TEGRA20_CLK_VI>, + <&tegra_car TEGRA20_CLK_CSI>; + resets = <&mc TEGRA20_MC_RESET_ISP>, + <&mc TEGRA20_MC_RESET_VI>, + <&tegra_car TEGRA20_CLK_ISP>, + <&tegra_car 20 /* VI */>, + <&tegra_car TEGRA20_CLK_CSI>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_vde: vdec { + clocks = <&tegra_car TEGRA20_CLK_VDE>; + resets = <&mc TEGRA20_MC_RESET_VDE>, + <&tegra_car TEGRA20_CLK_VDE>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_mpe: mpe { + clocks = <&tegra_car TEGRA20_CLK_MPE>; + resets = <&mc TEGRA20_MC_RESET_MPEA>, + <&mc TEGRA20_MC_RESET_MPEB>, + <&mc TEGRA20_MC_RESET_MPEC>, + <&tegra_car TEGRA20_CLK_MPE>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + }; };

mc: memory-controller@7000f000 { @@ -662,6 +744,7 @@ emc: memory-controller@7000f400 { reg = <0x7000f400 0x400>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA20_CLK_EMC>; + power-domains = <&pd_core>; #address-cells = <1>; #size-cells = <0>; #interconnect-cells = <0>; @@ -712,6 +795,9 @@ pcie@80003000 { <&tegra_car 72>, <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; + operating-points-v2 = <&pcie_dvfs_opp_table>; + power-domains = <&pd_core>; + status = "disabled";

pci@1,0 { @@ -754,6 +840,8 @@ usb@c5000000 { reset-names = "usb"; nvidia,needs-double-reset; nvidia,phy = <&phy1>; + operating-points-v2 = <&usbd_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -791,6 +879,8 @@ usb@c5004000 { resets = <&tegra_car 58>; reset-names = "usb"; nvidia,phy = <&phy2>; + operating-points-v2 = <&usb2_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -817,6 +907,8 @@ usb@c5008000 { resets = <&tegra_car 59>; reset-names = "usb"; nvidia,phy = <&phy3>; + operating-points-v2 = <&usb3_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -851,6 +943,8 @@ mmc@c8000000 { clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; + operating-points-v2 = <&sdmmc1_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -862,6 +956,8 @@ mmc@c8000200 { clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; + operating-points-v2 = <&sdmmc2_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -873,6 +969,8 @@ mmc@c8000400 { clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; + operating-points-v2 = <&sdmmc3_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

@@ -884,6 +982,8 @@ mmc@c8000600 { clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; + operating-points-v2 = <&sdmmc4_dvfs_opp_table>; + power-domains = <&pd_core>; status = "disabled"; };

Memory access must be blocked before hardware reset is asserted and before power is gated, otherwise a serious hardware fault is inevitable. Add reset for memory clients to the GR2D, GR3D and Host1x nodes.

Tested-by: Paul Fertser fercerpav@gmail.com # PAZ00 T20 Tested-by: Nicolas Chauvet kwizart@gmail.com # PAZ00 T20 Signed-off-by: Dmitry Osipenko digetx@gmail.com --- arch/arm/boot/dts/tegra20.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index ce38055a8952..eb6e5518fb5f 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -40,8 +40,8 @@ host1x@50000000 { interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA20_CLK_HOST1X>; clock-names = "host1x"; - resets = <&tegra_car 28>; - reset-names = "host1x"; + resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>; + reset-names = "host1x", "mc"; operating-points-v2 = <&host1x_dvfs_opp_table>; power-domains = <&pd_core>;

@@ -98,8 +98,8 @@ gr2d@54140000 { reg = <0x54140000 0x00040000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA20_CLK_GR2D>; - resets = <&tegra_car 21>; - reset-names = "2d"; + resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>; + reset-names = "2d", "mc"; operating-points-v2 = <&gr2d_dvfs_opp_table>; power-domains = <&pd_core>; }; @@ -108,8 +108,8 @@ gr3d@54180000 { compatible = "nvidia,tegra20-gr3d"; reg = <0x54180000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_GR3D>; - resets = <&tegra_car 24>; - reset-names = "3d"; + resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>; + reset-names = "3d", "mc"; operating-points-v2 = <&gr3d_dvfs_opp_table>; power-domains = <&pd_3d>; };

MPE, VI, EPP and ISP were never used and we don't have drivers for them. Since these modules are enabled by default in a device-tree, a device is created for them, blocking voltage scaling because there is no driver to bind, and thus, state of PMC driver is never synced. Disable them.

Signed-off-by: Dmitry Osipenko digetx@gmail.com --- arch/arm/boot/dts/tegra20.dtsi | 4 ++++ arch/arm/boot/dts/tegra30.dtsi | 8 ++++++++ 2 files changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index eb6e5518fb5f..05788c9cddc1 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -59,6 +59,7 @@ mpe@54040000 { reset-names = "mpe"; operating-points-v2 = <&mpe_dvfs_opp_table>; power-domains = <&pd_mpe>; + status = "disabled"; };

vi@54080000 { @@ -70,6 +71,7 @@ vi@54080000 { reset-names = "vi"; operating-points-v2 = <&vi_dvfs_opp_table>; power-domains = <&pd_venc>; + status = "disabled"; };

epp@540c0000 { @@ -81,6 +83,7 @@ epp@540c0000 { reset-names = "epp"; operating-points-v2 = <&epp_dvfs_opp_table>; power-domains = <&pd_core>; + status = "disabled"; };

isp@54100000 { @@ -91,6 +94,7 @@ isp@54100000 { resets = <&tegra_car 23>; reset-names = "isp"; power-domains = <&pd_venc>; + status = "disabled"; };

gr2d@54140000 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 09cb1ab75312..f9613384a487 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -145,6 +145,8 @@ mpe@54040000 { power-domains = <&pd_mpe>;

iommus = <&mc TEGRA_SWGROUP_MPE>; + + status = "disabled"; };

vi@54080000 { @@ -158,6 +160,8 @@ vi@54080000 { power-domains = <&pd_venc>;

iommus = <&mc TEGRA_SWGROUP_VI>; + + status = "disabled"; };

epp@540c0000 { @@ -171,6 +175,8 @@ epp@540c0000 { power-domains = <&pd_heg>;

iommus = <&mc TEGRA_SWGROUP_EPP>; + + status = "disabled"; };

isp@54100000 { @@ -183,6 +189,8 @@ isp@54100000 { power-domains = <&pd_venc>;

iommus = <&mc TEGRA_SWGROUP_ISP>; + + status = "disabled"; };

gr2d@54140000 {